Notice of Petitions by Firms for Determination of Eligibility To Apply for Trade Adjustment Assistance, 35032-35033 [E7-12329]

Download as PDF 35032 Federal Register / Vol. 72, No. 122 / Tuesday, June 26, 2007 / Notices be supported by vertical H-frame steel pole structures that would range in height from 90 to 130 feet aboveground. Angles, or changes in direction in the transmission line, would require larger structures and/or steel guy cables to act as a counter-force to maintain the integrity of the support structures. The proposed new transmission line would require a 150-foot wide right-ofway (ROW). The width of the ROW where the proposed line would be colocated with, or parallel to, existing electric transmission lines would also be 150 feet; however, a portion of the existing ROW would be utilized by locating the proposed line as close as possible to the existing facilities. A 75foot buffer would be maintained to each side of the centerline of the transmission line. EKPC is also proposing to rebuild a portion of an existing 69 kV transmission line as part of the proposed project. Within the proposed rebuild section, the existing electric transmission line ROW is currently 100 feet in width and would require 50 additional feet in ROW width to accommodate the proposed new line. The J.K. Smith 345 kV Switching Station would be a 345 kV breaker-anda-half configuration. It would be constructed within EKPC’s existing J.K. Smith Generating Station’s fenced boundary near an existing electric switchyard. The proposed site for the new switching station has been previously graded in association with other construction activity at the generating station and would not require extensive grading or earth moving activities. The structure heights in the switching station would be between 80 and 90 feet aboveground. The amount of land that would be affected by the proposed construction activity associated with the new switching station would be approximately eight acres. The West Garrard Switching Station would be a 345 kV breaker-and-a-half configuration designed to accommodate 138 kV and 69 kV step down transformers sometime in the future. The structure heights in the switching station would be between 80 and 90 feet aboveground. The proposed construction activity would affect approximately five to ten acres of land. The construction of the proposed electric generation and transmission project is tentatively scheduled to begin in the fall of 2007 and the estimated duration of construction would be 2 years. Alternatives considered by USDA Rural Development and EKPC included for the CTs were (a) no action, (b) alternate sources of power, (c) conservation and interruptible load service, (d) renewable energy sources, (e) non-renewable energy sources, (f) alternate sites. The alternatives considered for the transmission facilities were (a) no action, (b) placing the line underground, (c) electrical alternatives, (d) alternate routes, and (e) alternate switching station sites. An Environmental Report (ER) that describes the proposed project in detail and discusses its anticipated environmental impacts has been prepared by EKPC. The USDA Rural Development has reviewed and accepted the document as its EA of the proposed project. The EA is available for public review at addresses provided above in this Notice. Questions and comments should be sent to USDA Rural Development at the mailing or e-mail addresses provided above in this Notice. USDA Rural Development should receive comments on the EA in writing by July 26, 2007 to ensure that they are considered in its environmental impact determination. Should USDA Rural Development determine, based on the EA of the proposed project, that the impacts of the construction and operation of the project would not have a significant environmental impact, it will prepare a Finding of No Significant Impact. Public notification of a Finding of No Significant Impact would be published in the Federal Register and in newspapers with circulation in the project area. Any final action by USDA Rural Development related to the proposed jlentini on PROD1PC65 with NOTICES Address R&I Enterprises dba: Compulogic Design Co. Shelby Industries, LLC ............................ 233 Paredes Line Rd., Brownville, TX 78521. 175 McDaniel Road, Shelbyville, KY 40065. 17:07 Jun 25, 2007 Jkt 211001 PO 00000 Frm 00004 Fmt 4703 Mark S. Plank, Director, Engineering and Environmental Staff, USDA/Rural Development/Utilities Programs. [FR Doc. E7–12294 Filed 6–25–07; 8:45 am] BILLING CODE 3410–15–P DEPARTMENT OF COMMERCE Economic Development Administration Notice of Petitions by Firms for Determination of Eligibility To Apply for Trade Adjustment Assistance Economic Development Administration, Department of Commerce. AGENCY: Notice and opportunity for public comment. ACTION: Pursuant to Section 251 of the Trade Act of 1974 (19 U.S.C. 2341 et seq.), the Economic Development Administration (EDA) has received petitions for certification of eligibility to apply for Trade Adjustment Assistance from the firms listed below. EDA has initiated separate investigations to determine whether increased imports into the United States of articles like or directly competitive with those produced by each firm contributed importantly to the total or partial separation of the firm’s workers, or threat thereof, and to a decrease in sales or production of each petitioning firm. List of Petitions Received by EDA for Certification of Eligibility To Apply for Trade Adjustment Assistance for the Period May 21, 2007 Through June 20, 2007 Date petition accepted Firm VerDate Aug<31>2005 project will be subject to, and contingent upon, compliance with all relevant Federal, state and local environmental laws and regulations, and completion of the environmental review requirements as prescribed in USDA Rural Development’s Environmental Policies and Procedures (7 CFR part 1794). Sfmt 4703 Product 5/24/2007 Metal forming and mold dies material. 5/24/2007 Winches, couplers, jacks and accessory items such as trailer balls/chains/ locks, etc. made of steel. Primary manufacturing processes are stamping, welding, zinc plating or painting and mainly manual assembly. E:\FR\FM\26JNN1.SGM 26JNN1 35033 Federal Register / Vol. 72, No. 122 / Tuesday, June 26, 2007 / Notices Date petition accepted Firm Address Mach Mold Incorporated ......................... 360 Urbandale, Benton Harbor, MI 49022. 1420 E. Third Ave., Post Falls, Idaho 83854. 641 NYS Rt. 13 South Cortland, NY 13045–0749. 898 Main Street, Action, Massachusetts 01720. 5/24/2007 Injection type mold. 5/25/2007 Molded plastic products. 5/25/2007 31280 La Baya Dr., Westlake Village, CA 91362. 252 Willow Street, Manchester, NH 03103. 96 Audubon Road, Wakefield, Massachusetts. 721 Donoughe Street, Gallitzin, PA 16641. 4270 White Street, SW, Grandville, MI 49418. 1006 E. Michigan Avenue, Marshall, MI 49068. 6/19/2007 Manufacture of CNC machining centers and parts. Manufacture customized high quality machined and fabricated products and a line of specialty vehicle signs. Lead and wire harness manufacturing. Heppner Molds, Inc ................................. New Monarch Machine Tools, Inc .......... J.R. Higgins Associates, LLC .................. JRI, Inc. (Wire Processing Division) ....... Electropac Company, Inc ........................ Creative Marketing Concepts, Corp ........ R&M Apparel, Inc .................................... Enterprise Tool and Die, Inc ................... Marshall Metal Products, Inc ................... Any party having a substantial interest in these proceedings may request a public hearing on the matter. A written request for a hearing must be submitted to the Office of Performance Evaluation, Room 7009, Economic Development Administration, U.S. Department of Commerce, Washington, DC 20230, no later than ten (10) calendar days following publication of this notice. Please follow the procedures set forth in Section 315.9 of EDA’s final rule (71 FR 56704) for procedures for requesting a public hearing. The Catalog of Federal Domestic Assistance official program number and title of the program under which these petitions are submitted is 11.313, Trade Adjustment Assistance. Dated: June 20, 2007. William P. Kittredge, Program Officer for TAA. [FR Doc. E7–12329 Filed 6–25–07; 8:45 am] BILLING CODE 3510–24–P DEPARTMENT OF COMMERCE Bureau of Industry and Security jlentini on PROD1PC65 with NOTICES Materials Technical Advisory Committee; Notice of Partially Closed Meeting The Materials Technical Advisory Committee will meet on July 12, 2007, 10:30 a.m., Herbert C. Hoover Building, Room 3884, 14th Street between Constitution & Pennsylvania Avenues, NW., Washington, DC. The Committee advises the Office of the Assistant Secretary for Export Administration VerDate Aug<31>2005 17:07 Jun 25, 2007 Jkt 211001 6/19/2007 6/20/2007 6/19/2007 6/19/2007 6/19/2007 6/19/2007 with respect to technical questions that affect the level of export controls applicable to materials and related technology. Agenda Public Session Product Single and double-sided printed circuit boards. Vertical tanning machines. Manufactures womens’, misses’ and girls’ outerwear. Progressive stamping dies and transfer dies for the forming of sheet metal. Small to medium size metal stampings. The Assistant Secretary for Administration, with the concurrence of the delegate of the General Counsel, formally determined on June 6, 2007, pursuant to Section 10(d) of the Federal Advisory Committee Act, as amended, that the portion of the meeting dealing with matters the premature disclosure of which would likely frustrate the implementation of a proposed agency action as described in 5 U.S.C. 552b(c)(9)(B) shall be exempt from the provisions relating to public meetings found in 5 U.S.C. app. 2 §§ 10(a)(1) and 10(a)(3). The remaining portions of the meeting will be open to the public. For more information, call Yvette Springer at (202) 482–2813. 1. Opening Remarks by the Chairman. 2. Presentation on Synthetic Genomics. 3. Synthetic Genomic Control Discussion. 4. Composite Working Group Update. 5. Export Control Classification Number Review Working Group Cochairs Comments. 6. Pending Regulatory Changes from Australia Group Plenary. 7. Export Control Classification Number Review Evaluation, Follow up, and Assignments. Dated: June 20, 2007. Yvette Springer, Committee Liaison Officer. [FR Doc. 07–3115 Filed 6–25–07; 8:45 am] Closed Session BILLING CODE 3510–JT–M 8. Discussion of matters determined to be exempt from the provisions relating to public meetings found in 5 U.S.C. app. 2 §§ 10(a)(1) and 10(a)(3). A limited number of seats will be available during the public session of the meeting. Reservations are not accepted. To the extent time permits, members of the public may present oral statements to the Committee. Written statements may be submitted at any time before or after the meeting. However, to facilitate distribution of public presentation materials to Committee members, the materials should be forwarded prior to the meeting to Ms. Yvette Springer at Yspringer@bis.doc.gov. PO 00000 Frm 00005 Fmt 4703 Sfmt 4703 DEPARTMENT OF COMMERCE International Trade Administration [A–533–810] Stainless Steel Bar from India: Extension of Time Limit for the Final Results of the Antidumping Duty Administrative Review Import Administration, International Trade Administration, Department of Commerce. EFFECTIVE DATE: June 26, 2007. FOR FURTHER INFORMATION CONTACT: Scott Holland or Brandon Farlander, AD/CVD Operations, Office 1, Import AGENCY: E:\FR\FM\26JNN1.SGM 26JNN1

Agencies

[Federal Register Volume 72, Number 122 (Tuesday, June 26, 2007)]
[Notices]
[Pages 35032-35033]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: E7-12329]


=======================================================================
-----------------------------------------------------------------------

DEPARTMENT OF COMMERCE

Economic Development Administration


Notice of Petitions by Firms for Determination of Eligibility To 
Apply for Trade Adjustment Assistance

AGENCY: Economic Development Administration, Department of Commerce.

ACTION: Notice and opportunity for public comment.

-----------------------------------------------------------------------

    Pursuant to Section 251 of the Trade Act of 1974 (19 U.S.C. 2341 et 
seq.), the Economic Development Administration (EDA) has received 
petitions for certification of eligibility to apply for Trade 
Adjustment Assistance from the firms listed below. EDA has initiated 
separate investigations to determine whether increased imports into the 
United States of articles like or directly competitive with those 
produced by each firm contributed importantly to the total or partial 
separation of the firm's workers, or threat thereof, and to a decrease 
in sales or production of each petitioning firm.

List of Petitions Received by EDA for Certification of Eligibility To 
Apply for Trade Adjustment Assistance for the Period May 21, 2007 
Through June 20, 2007

 
----------------------------------------------------------------------------------------------------------------
                                                                      Date  petition
                  Firm                             Address               accepted               Product
----------------------------------------------------------------------------------------------------------------
R&I Enterprises dba: Compulogic Design   233 Paredes Line Rd.,             5/24/2007  Metal forming and mold
 Co.                                      Brownville, TX 78521.                        dies material.
Shelby Industries, LLC.................  175 McDaniel Road,                5/24/2007  Winches, couplers, jacks
                                          Shelbyville, KY 40065.                       and accessory items such
                                                                                       as trailer balls/chains/
                                                                                       locks, etc. made of
                                                                                       steel. Primary
                                                                                       manufacturing processes
                                                                                       are stamping, welding,
                                                                                       zinc plating or painting
                                                                                       and mainly manual
                                                                                       assembly.

[[Page 35033]]

 
Mach Mold Incorporated.................  360 Urbandale, Benton             5/24/2007  Injection type mold.
                                          Harbor, MI 49022.
Heppner Molds, Inc.....................  1420 E. Third Ave., Post          5/25/2007  Molded plastic products.
                                          Falls, Idaho 83854.
New Monarch Machine Tools, Inc.........  641 NYS Rt. 13 South              5/25/2007  Manufacture of CNC
                                          Cortland, NY 13045-0749.                     machining centers and
                                                                                       parts.
J.R. Higgins Associates, LLC...........  898 Main Street, Action,          6/19/2007  Manufacture customized
                                          Massachusetts 01720.                         high quality machined and
                                                                                       fabricated products and a
                                                                                       line of specialty vehicle
                                                                                       signs.
JRI, Inc. (Wire Processing Division)...  31280 La Baya Dr.,                6/19/2007  Lead and wire harness
                                          Westlake Village, CA                         manufacturing.
                                          91362.
Electropac Company, Inc................  252 Willow Street,                6/20/2007  Single and double-sided
                                          Manchester, NH 03103.                        printed circuit boards.
Creative Marketing Concepts, Corp......  96 Audubon Road,                  6/19/2007  Vertical tanning machines.
                                          Wakefield, Massachusetts.
R&M Apparel, Inc.......................  721 Donoughe Street,              6/19/2007  Manufactures womens',
                                          Gallitzin, PA 16641.                         misses' and girls'
                                                                                       outerwear.
Enterprise Tool and Die, Inc...........  4270 White Street, SW,            6/19/2007  Progressive stamping dies
                                          Grandville, MI 49418.                        and transfer dies for the
                                                                                       forming of sheet metal.
Marshall Metal Products, Inc...........  1006 E. Michigan Avenue,          6/19/2007  Small to medium size metal
                                          Marshall, MI 49068.                          stampings.
----------------------------------------------------------------------------------------------------------------

    Any party having a substantial interest in these proceedings may 
request a public hearing on the matter. A written request for a hearing 
must be submitted to the Office of Performance Evaluation, Room 7009, 
Economic Development Administration, U.S. Department of Commerce, 
Washington, DC 20230, no later than ten (10) calendar days following 
publication of this notice. Please follow the procedures set forth in 
Section 315.9 of EDA's final rule (71 FR 56704) for procedures for 
requesting a public hearing. The Catalog of Federal Domestic Assistance 
official program number and title of the program under which these 
petitions are submitted is 11.313, Trade Adjustment Assistance.

    Dated: June 20, 2007.
William P. Kittredge,
Program Officer for TAA.
 [FR Doc. E7-12329 Filed 6-25-07; 8:45 am]
BILLING CODE 3510-24-P