Certain New Chemicals; Receipt and Status Information, 28045-28051 [E7-9596]
Download as PDF
<![CDATA[
Federal Register / Vol. 72, No. 96 / Friday, May 18, 2007 / Notices
Oil and Gas Seismic Survey, AK,
Comment Period Ends: 06/29/2007,
Contact: William T. Hogarth 301–713–
1632.
Revision of FR Notice Published 03/
30/2007: Extending Comment Period
from 05/14/2007 to 06/29/2007.
EIS No. 20070163, Final EIS, BLM, ID,
Eastside Township Fuels and
Vegetation Project, Address the Forest
Health, Fuels, Safety, and Watershed
Issues, Elk City, Idaho County, ID,
Wait Period Ends: 05/29/2007,
Contact: Robbin Boyce 208–962–3594.
Revision of FR Notice Published 04/
27/2007: Correction Document Status
from Draft to Final.
Dated: May 15, 2007.
Robert W. Hargrove,
Director, NEPA Compliance Division, Office
of Federal Activities.
[FR Doc. E7–9648 Filed 5–17–07; 8:45 am]
BILLING CODE 6560–50–P
ENVIRONMENTAL PROTECTION
AGENCY
[EPA–HQ–OPPT–2007–0394; FRL–8131–5]
Certain New Chemicals; Receipt and
Status Information
Environmental Protection
Agency (EPA).
ACTION: Notice.
pwalker on PROD1PC71 with NOTICES
AGENCY:
SUMMARY: Section 5 of the Toxic
Substances Control Act (TSCA) requires
any person who intends to manufacture
(defined by statute to include import) a
new chemical (i.e., a chemical not on
the TSCA Inventory) to notify EPA and
comply with the statutory provisions
pertaining to the manufacture of new
chemicals. Under sections 5(d)(2) and
5(d)(3) of TSCA, EPA is required to
publish a notice of receipt of a
premanufacture notice (PMN) or an
application for a test marketing
exemption (TME), and to publish
periodic status reports on the chemicals
under review and the receipt of notices
of commencement to manufacture those
chemicals. This status report, which
covers the period from March 26, 2007
to April 27, 2007, consists of the PMNs
and TMEs, both pending or expired, and
the notices of commencement to
manufacture a new chemical that the
Agency has received under TSCA
section 5 during this time period.
DATES: Comments identified by the
specific PMN number or TME number,
must be received on or before June 18,
2007.
ADDRESSES: Submit your comments,
identified by docket identification (ID)
VerDate Aug<31>2005
17:06 May 17, 2007
Jkt 211001
number EPA–HQ–OPPT–2007–0394, by
one of the following methods.
• Federal eRulemaking Portal: https://
www.regulations.gov. Follow the on-line
instructions for submitting comments.
• Mail: Document Control Office
(7407M), Office of Pollution Prevention
and Toxics (OPPT), Environmental
Protection Agency, 1200 Pennsylvania
Ave., NW., Washington, DC 20460–
0001.
• Hand Delivery: OPPT Document
Control Office (DCO), EPA East Bldg.,
Rm. 6428, 1201 Constitution Ave., NW.,
Washington, DC. Attention: Docket ID
number EPA–HQ–OPPT–2007–0394.
The DCO is open from 8 a.m. to 4 p.m.,
Monday through Friday, excluding legal
holidays. The telephone number for the
DCO is (202) 564–8930. Such deliveries
are only accepted during the Docket’s
normal hours of operation, and special
arrangements should be made for
deliveries of boxed information.
Instructions: Direct your comments to
docket ID number EPA–HQ–OPPT–
2007–0394. EPA’s policy is that all
comments received will be included in
the public docket without change and
may be made available online at https://
www.regulations.gov, including any
personal information provided, unless
the comment includes information
claimed to be Confidential Business
Information (CBI) or other information
whose disclosure is restricted by statute.
Do not submit information that you
consider to be CBI or otherwise
protected through regulations.gov or email. The regulations.gov website is an
‘‘anonymous access’’ systems, which
means EPA will not know your identity
or contact information unless you
provide it in the body of your comment.
If you send an e-mail comment directly
to EPA without going through
regulations.gov your e-mail address will
be automatically captured and included
as part of the comment that is placed in
the public docket and made available on
the Internet. If you submit an electronic
comment, EPA recommends that you
include your name and other contact
information in the body of your
comment and with any disk or CD ROM
you submit. If EPA cannot read your
comment due to technical difficulties
and cannot contact you for clarification,
EPA may not be able to consider your
comment. Electronic files should avoid
the use of special characters, any form
of encryption, and be free of any defects
or viruses. For additional information
about EPA’s public docket, visit the EPA
Docket Center homepage at https://
www.epa.gov/epahome/dockets.htm.
Docket: All documents in the docket
are listed in the docket’s index available
in regulations.gov. To access the
PO 00000
Frm 00027
Fmt 4703
Sfmt 4703
28045
electronic docket, go to https://
www.regulations.gov, select ‘‘Advanced
Search,’’ then ‘‘Docket Search.’’ Insert
the docket ID number where indicated
and select the ‘‘Submit’’ button. Follow
the instructions on the regulations.gov
web site to view the docket index or
access available documents. Although
listed in the index, some information is
not publicly available, e.g., Confidential
Business Information (CBI) or other
information whose disclosure is
restricted by statute. Certain other
material, such as copyrighted material,
will be publicly available only in hard
copy. Publicly available docket
materials are available electronically at
https://www.regulations.gov, or, if only
available in hard copy, at the OPPT
Docket. The OPPT Docket is located in
the EPA Docket Center (EPA/DC) at Rm.
3334, EPA West Bldg., 1301
Constitution Ave., NW., Washington,
DC. The EPA/DC Public Reading Room
hours of operation are 8:30 a.m. to 4:30
p.m., Monday through Friday, excluding
Federal holidays. The telephone
numberof the EPA/DC Public Reading
Room is (202) 566–1744, and the
telephone number for the OPPT Docket
is (202) 566–0280. Docket visitors are
required to show photographic
identification, pass through a metal
detector, and sign the EPA visitor log.
All visitor bags are processed through
an X-ray machine and subject to search.
Visitors will be provided an EPA/DC
badge that must be visible at all times
in the building and returned upon
departure.
FOR FURTHER INFORMATION CONTACT:
Colby Lintner, Regulatory Coordinator,
Environmental Assistance Division,
Office of Pollution Prevention and
Toxics (7408M), Environmental
Protection Agency, 1200 Pennsylvania
Ave., NW., Washington, DC 20460–
0001; telephone number: (202) 554–
1404; e-mail address: TSCAHotline@epa.gov.
SUPPLEMENTARY INFORMATION:
I. General Information
A. Does this Action Apply to Me?
This action is directed to the public
in general. As such, the Agency has not
attempted to describe the specific
entities that this action may apply to.
Although others may be affected, this
action applies directly to the submitter
of the premanufacture notices addressed
in the action. If you have any questions
regarding the applicability of this action
to a particular entity, consult the person
listed under FOR FURTHER INFORMATION
CONTACT.
E:\FR\FM\18MYN1.SGM
18MYN1
28046
Federal Register / Vol. 72, No. 96 / Friday, May 18, 2007 / Notices
B. What Should I Consider as I Prepare
My Comments for EPA?
1. Submitting CBI. Do not submit this
information to EPA through
regulations.gov or e-mail. Clearly mark
the part or all of the information that
you claim to be CBI. For CBI
information in a disk or CD ROM that
you mail to EPA, mark the outside of the
disk or CD ROM as CBI and then
identify electronically within the disk or
CD ROM the specific information that is
claimed CBI). In addition to one
complete version of the comment that
includes information claimed as CBI, a
copy of the comment that does not
contain the information claimed as CBI
must be submitted for inclusion in the
public docket. Information so marked
will not be disclosed except in
accordance with procedures set forth in
40 CFR part 2.
2. Tips for preparing your comments.
When submitting comments, remember
to:
i. Identify the document by docket
number and other identifying
information (subject heading, Federal
Register date and page number).
ii. Follow directions. The agency may
ask you to respond to specific questions
or organize comments by referencing a
Code of Federal Regulations (CFR) part
or section number.
iii. Explain why you agree or disagree;
suggest alternatives and substitute
language for your requested changes.
iv. Describe any assumptions and
provide any technical information and/
or data that you used.
v. If you estimate potential costs or
burdens, explain how you arrived at the
estimate.
vi. Provide specific examples to
illustrate your concerns, and suggested
alternatives.
vii. Explain your views as clearly as
possible, avoiding the use of profanity
or personal threats.
viii. Make sure to submit your
comments by the comment period
deadline identified.
II. Why is EPA Taking this Action?
Section 5 of TSCA requires any
person who intends to manufacture
(defined by statute to include import) a
new chemical (i.e., a chemical not on
the TSCA Inventory to notify EPA and
comply with the statutory provisions
pertaining to the manufacture of new
chemicals. Under sections 5(d)(2) and
5(d)(3) of TSCA, EPA is required to
publish a notice of receipt of a PMN or
an application for a TME and to publish
periodic status reports on the chemicals
under review and the receipt of notices
of commencement to manufacture those
chemicals. This status report, which
covers the period from March 26, 2007
to April 27, 2007, consists of the PMNs
and TMEs, both pending or expired, and
the notices of commencement to
manufacture a new chemical that the
Agency has received under TSCA
section 5 during this time period.
III. Receipt and Status Report for PMNs
and TMEs
This status report identifies the PMNs
and TMEs, both pending or expired, and
the notices of commencement to
manufacture a new chemical that the
Agency has received under TSCA
section 5 during this time period. If you
are interested in information that is not
included in the following tables, you
may contact EPA as described in Unit II.
to access additional non-CBI
information that may be available.
In Table I of this unit, EPA provides
the following information (to the extent
that such information is not claimed as
CBI) on the PMNs received by EPA
during this period: the EPA case number
assigned to the PMN; the date the PMN
was received by EPA; the projected end
date for EPA’s review of the PMN; the
submitting manufacturer; the potential
uses identified by the manufacturer in
the PMN; and the chemical identity.
I. 80 PREMANUFACTURE NOTICES RECEIVED FROM: 03/26/07 TO 04/27/07
Case No.
Received
Date
Projected
Notice
End Date
Manufacturer/Importer
03/26/07
06/23/07
CBI
P–07–0326
P–07–0327
P–07–0328
P–07–0329
03/26/07
03/26/07
03/26/07
03/26/07
06/23/07
06/23/07
06/23/07
06/23/07
P–07–0330
03/28/07
06/25/07
CBI
CBI
CBI
CIBA Specialty Chemicals Corporation
3M Company
P–07–0331
03/28/07
06/25/07
CBI
P–07–0332
P–07–0333
P–07–0334
P–07–0335
P–07–0336
03/28/07
03/29/07
03/28/07
03/30/07
04/02/07
06/25/07
06/26/07
06/25/07
06/27/07
06/30/07
3M Company
CBI
Cytec Industries Inc.
CBI
The Dow Chemical
Company
P–07–0337
pwalker on PROD1PC71 with NOTICES
P–07–0319
04/02/07
06/30/07
CBI
P–07–0338
P–07–0339
04/02/07
03/29/07
06/30/07
06/26/07
CBI
Ashland Inc., Environmental Health and
Safety
VerDate Aug<31>2005
17:06 May 17, 2007
Jkt 211001
PO 00000
Frm 00028
Use
(G) Raw material for polymer paint
additive
(G) Paint additive
(G) Antioxidant
(G) Antioxidant
(G) Ultra violet stabilizer for coatings
(G) Film coating additive
(S) Hardener for architectural coatings; hardener for metal primers for
maintenance coatings
(G) Surface modifier
(G) Open non-dispersive resin
(G) Coatings resin
(G) Adhesive for electrical parts
(G) One-component foaming adhesives and sealants for roofing and
construction
(G) Open non-dispersive (sizing
agent)
(G) Open non-dispersion (coatings)
(G) Ink, coating, adhesive
Fmt 4703
Sfmt 4703
E:\FR\FM\18MYN1.SGM
Chemical
(G) Alkylamino alcohol
(G) Polyurethane
(G) Ncs 1: Substituted phenol
(G) Ncs 2: Substituted phenol
(G) Derivative of 2,4-dihydroxy benzophenone
(G) Surface modified ceramic materials and wares, chemicals
(G)
1,2-ethanediamine,
N1-(2aminoethyl)-, reaction products with
glycidyl aromatic ether
(G) Alkyloxy carboxylic acid
(G) Aromatic isocyanate prepolymer
(G) Acrylated aliphatic polyurethane
(G) Epoxy resin
(G) Polymeric mdi prepolymer based
on
poly(oxyethylene-cooxypropylene) triol and amine initiated tetrol
(G) Polyester polyurethane
(G) Aliphatic polyurethane resin
(G) Polyacrylate oligomer product
from base-catalyzed reaction of
dipropylene
gylcol
diacrylate,
genomer
3364
amine-modified
polyacrylate, ethoxylated trimethylol
propane triacrylate and .beta.ketoester
18MYN1
28047
Federal Register / Vol. 72, No. 96 / Friday, May 18, 2007 / Notices
I. 80 PREMANUFACTURE NOTICES RECEIVED FROM: 03/26/07 TO 04/27/07—Continued
Case No.
Received
Date
Projected
Notice
End Date
Manufacturer/Importer
Use
03/29/07
06/26/07
Ashland Inc., Environmental Health and
Safety
(G) Ink, coating, adhesive
P–07–0341
03/29/07
06/26/07
Ashland Inc., Environmental Health and
Safety
(G) Ink, coating, adhesive
P–07–0342
03/29/07
06/26/07
Ashland Inc., Environmental Health and
Safety
(G) Ink, coating, adhesive
P–07–0343
03/29/07
06/26/07
Ashland Inc., Environmental Health and
Safety
(G) Ink, coating, adhesive
P–07–0344
03/29/07
06/26/07
Ashland Inc., Environmental Health and
Safety
(G) Ink, coating, adhesive
P–07–0345
04/02/07
06/30/07
CBI
(G) Component of manufactured consumer article-contained use
P–07–0346
03/29/07
06/26/07
Shin-etsu Silicones of
America Inc.
(S) Additive of adhesives for building
materials
P–07–0347
04/02/07
06/30/07
CBI
(S) Organic synthesis intermediate
P–07–0348
04/03/07
07/01/07
CBI
(G) Packaging
P–07–0349
P–07–0350
04/03/07
04/03/07
07/01/07
07/01/07
3M
Incorez Corporation
P–07–0351
04/04/07
07/02/07
CBI
P–07–0352
04/04/07
07/02/07
CBI
(G) Fluorinated additive for polymers
(S) Binder, coating or modifying resin
used in the manufacture of coatings
for wood, plastic and cementitous
substrates
(G) Component of manufactured consumer article - contained use
(G) Coating component
P–07–0353
P–07–0354
04/05/07
04/05/07
07/03/07
07/03/07
04/05/07
07/03/07
P–07–0356
04/04/07
07/02/07
3M Company
E.I. Dupont De Nemours
E.I. Dupont De Nemours
CBI
(G) Chemical intermediate
(S) Industrial intermediate
P–07–0355
pwalker on PROD1PC71 with NOTICES
P–07–0340
P–07–0357
04/05/07
07/03/07
Crosslink Energy Materials, LLC
(S) Conductive coating for electrical
capacitors
VerDate Aug<31>2005
17:06 May 17, 2007
Jkt 211001
PO 00000
Frm 00029
(S) Industrial intermediate
(G) Coating resin for open, non-dispersive use
Fmt 4703
Sfmt 4703
E:\FR\FM\18MYN1.SGM
Chemical
(G) Polyacrylate oligomer product
from base-catalyzed reaction of
1,6-hexanediol diacrylate, genomer
3364 amine-modified polyacrylate,
ethoxylated trimethylol propane
triacrylate and .beta.-ketoester
(G) Polyacrylate oligomer product
from base-catalyzed reaction of
dipropylene
gylcol
diacrylate,
ebecryl
81
amine-modified
polyacrylate, ethoxylated trimethylol
propane triacrylate and .beta.ketoester
(G) Polyacrylate oligomer product
from base-catalyzed reaction of
1,6-hexanediol diacrylate, ebecryl
81 amine-modified polyacrylate,
ethoxylated trimethylol propane
triacrylate and .beta.-ketoester
(G) Polacrylate oligomer product from
base-catalyzed
reaction
of
dipropylene
gylcol
diacrylate,
genomer
3364
amine-modified
polyacrylate, ethoxylated trimethylol
propane triacrylate and .beta.ketoester
(G) Polyacrylate oligomer product
from base-catalyzed reaction of
ethoxylated
1,6-hexanediol
diacrylate, genomer 3364 aminemodified polyacrylate, ethoxylated
trimethylol propane triacrylate and
.beta.-ketoester
(G)
Spiro[isobenzofuran1(3H),polyheterocycle]-3-one,
3′[(4-fluoro-2-methylphenyl)amino]-6′[(2-fluorophenyl)amino](S) Siloxanes and silicones, hydroxy
me 3-hydroxypropyl me, me (1oxododecyl)oxy, esters with C12–20
fatty acids, esters with polyethylene-polypropylene
glycol
mono-bu ether
(G)
Spiro[isobenzofuran1(3h),polyheterocycle]-3-one,
3′chloro-6′-[(4-fluoro-2methylphenyl)amino](G) Copolymer based on sulfonic acid
monomer
(G) Fluorinated alkylammonium salt
(G)
Aqueous
aliphatic
anionio
polyunethane dispersion
(G)
Carbomonocycle,
bis[(4methylphenoxy)methyl](G) Modified polymer of substituted
acrylate and alkyl methacrylates
(G) Alkyl acid fluoride
(G) N-methyl- (amino,chloro,methyl)
carbomonocyclic carbamide
(G) 3-bromo-1-(3-chloro-2-pyridinyl)1H-pyrazole derivative
(G)
Polymer
with
aliphatic
diisocyanates,
polycarbonatediol
and bishydroxymethylproionic acid
(G) Polyaniline emeraldine salt
18MYN1
28048
Federal Register / Vol. 72, No. 96 / Friday, May 18, 2007 / Notices
I. 80 PREMANUFACTURE NOTICES RECEIVED FROM: 03/26/07 TO 04/27/07—Continued
Case No.
Received
Date
Projected
Notice
End Date
Manufacturer/Importer
Use
Chemical
04/09/07
07/07/07
CBI
(G) Open non dispersive use
P–07–0359
04/09/07
07/07/07
CBI
(G) An open non-dispersive use
P–07–0360
P–07–0361
04/09/07
04/10/07
07/07/07
07/08/07
Danisco US, Inc.
Alberdingk boley Inc.
(S) Hydrolysis of phytate
(S) For wood coatings
P–07–0362
04/10/07
07/08/07
Dupont Company
P–07–0363
04/10/07
07/08/07
Dupont Company
P–07–0364
04/10/07
07/08/07
Dupont Company
P–07–0365
04/10/07
07/08/07
Dupont Company
P–07–0366
04/10/07
07/08/07
CBI
P–07–0367
04/10/07
07/08/07
CBI
(S) Production of molded articles/
parts; production of filaments; production of extruded articles
(S) Production of molded articles/
parts; production of filaments; production of extruded articles
(S) Production of molded articles/
parts; production of filaments; production of extruded articles
(S) Production of molded articles/
parts; production of filaments; production of extruded articles
(S) Precursor for use in semiconductor processing
(G) Lubricant additive
P–07–0368
04/04/07
07/02/07
Henkel Corporation
(G) Adhesive component
P–07–0369
04/10/07
07/08/07
Robertet, Inc.
04/11/07
07/09/07
CBI
(G) Glycol phosphite
P–07–0372
04/12/07
07/10/07
CBI
(S) As an odoriferous component of
fragrance compounds
(G) Catalyst of polyurethane foam
manufacture
(S) Colorant in thermoplastics
(G)
Fluorinated
zinc
dialkyldthiophosphate
(G) Phenol, substituted-, polymer with
substituted oxirane and substituted
thiol
(S) Oils, poplar, populus nigra
P–07–0370
P–07–0373
04/12/07
07/10/07
CBI
(S) Colorant in thermoplastics
P–07–0374
04/12/07
07/10/07
CBI
P–07–0375
04/12/07
07/10/07
04/12/07
07/10/07
P–07–0377
04/12/07
07/10/07
J.M. Huber Corporation
Boulder Scientific
Company
Neste Oil
(S)
Colorant
in
thermoplastics;
colorant in coatings/paints
(S) Flame retardant
P–07–0376
P–07–0378
04/13/07
07/11/07
Renosol Systems,
L.L.C.
P–07–0379
pwalker on PROD1PC71 with NOTICES
P–07–0358
04/16/07
07/14/07
Henkel Corporation
VerDate Aug<31>2005
17:06 May 17, 2007
Jkt 211001
PO 00000
Frm 00030
(S) Chemical intermediate
(S) Renewable diesel fuel to be
blended with conventional diesel
(S) Reactive component in a polyol
mixture subsequently reacted with
an isocyanate to mold polyurethane
foam; reactive component in a
polyol mixture sold with an
isocyanate to mold polyurethane articles.
(S) A polymerizable component of adhesive and sealant formulations
Fmt 4703
Sfmt 4703
E:\FR\FM\18MYN1.SGM
(G) Hexitol, anhydro-, bis[[(1-oxo-2propenyl)oxy]benzoate],
polymer
with phenylene bis[[(1-oxo-2-propenyl)oxy]alkyl(C1–C10)oxy
benzoate]
(G) Halide of unsaturated alkyl hydrocarbon
(G) Phytase
(G) Linseed oil, ester with pentaerythritol, polymer with hydrazine, 3-hydroxy-2-(hydroxymethyl)2methylpropanoic acid, 5-isocyanato1-(isocyanatomethyl)alkylcychexane, 1,1′- methylenebis
[4.isocyanatocyclohexane]
and
polypropylene
glycol,compounds
with triethylamine
(G)
Butylene
phthalate(poly-1,3propyleneoxide) phthalate copolymer
(G)
Butylene
phthalate(poly-1,3propyleneoxide) phthalate copolymer
(G)
Butylene
phthalate(poly-1,3propyleneoxide) phthalate copolymer
(G)
Butylene
phthalate(poly-1,3propyleneoxide) phthalate copolymer
(G) Metal alkyl amide
(G) Amine derivative of ci pigment
yellow 138
(G) Counterion of sulfonated ci pigment yellow 138
(G) Oligomeric hindered amine derivative of ci pigment yellow 138
(G) Aluminum trihydrate surface treated
(S) 1,2-cyclohexanedicarboxylic acid,
(1r,2r)-re(G) Alkanes, branched and linear
(G)
Methylenebisisocyanatocarbomonocycle,
reaction
product
with
polyalkyloxirane and oligomeric
hydroxyalkenyl ester
(S) Ethanol, 2,2′,2′′-nitrilotris-, polymer with .alpha.-hydro-.omega.hydroxypoly(oxy-1,4-butanediyl)
and
1,1′-methylenebis[4isocyanatocyclohexane], 2-hydroxyethyl acrylate-blocked
18MYN1
28049
Federal Register / Vol. 72, No. 96 / Friday, May 18, 2007 / Notices
I. 80 PREMANUFACTURE NOTICES RECEIVED FROM: 03/26/07 TO 04/27/07—Continued
Case No.
Received
Date
Projected
Notice
End Date
Manufacturer/Importer
Use
Chemical
(S) Fatty acids, C18-unsaturated,
dimers, polymers with ethylenediamine,
12-hydroxyoctadecanoic
acid, 4-methyl-1,3-dioxolan-2-one,
piperazine, polypropylene glycol
diamine and stearic acid
(S) Fatty acids, C18-unsaturated,
dimers, polymers with ethylenediamine,
12-hydroxyoctadecanoic
acid, 4-methyl-1,3-dioxolan-2-one,
piperazine, polypropylene glycol
diamine and tall-oil fatty acids
(S) Fatty acids, C18-unsaturated,
dimers, polymers with ethylenediamine,
12-hydroxyoctadecanoic
acid, 4-methyl-1,3-dioxolan-2-one,
piperazine, polypropylene glycol
diamine, sebacic acid and stearic
acid
(S) Fatty acids, C18-unsaturated,
dimers, polymers with ethylenediamine,
12-hydroxyoctadecanoic
acid, 4-methyl-1,3-dioxolan-2-one,
piperazine, polypropylene glycol
diamine, sebacic acid and tall-oil
fatty acids
(S) Fatty acids, C18-unsaturated,
dimers, hydrogenated, polymers
with
ethylenediamine,
12hydroxyoctadecanoic acid, 4-methyl-1,3-dioxolan-2-one,
piperazine,
polypropylene glycol diamine and
stearic acid
(S) Fatty acids, C18-unsaturated,
dimers, polymers with ethylenediamine,
hexamethylenediamine,
12-hydroxyoctadecanoic acid, 4methyl-1,3-dioxolan-2-one,
piperazine, polypropylene glycol diamine
and stearic acid
(G) Heteropolycycle alkyl ether sulfate
salt
(S)
polydimethylsilozxane
hydroxyalkyl terminated, polymers
with diisocyanate and aminodlkyl
groups alphatic amine
(G) Polydimethylsiloxane hydroxyalkyl
terminated,
polymers
with
diisocyanate and aminoalkyl groups
aliphatic amine blocked, acetates
(G) Trialkenyl substituted cyclic alkane
(G) Silicone polyglycol ether
(G) Polyurethane-polyurea resin
(G) Modified epoxy resin
(G) Isocyanate functional polyester
urethane polymer
(G) Alkoxy siloxane
(G) Dialkyl formamide
04/16/07
07/14/07
CBI
(G) Intermediate in the manufacture
of hot melt adhesives.
P–07–0381
04/16/07
07/14/07
CBI
(G) Intermediate in the manufacture
of hot melt adhesives.
P–07–0382
04/16/07
07/14/07
CBI
(G) Intermediate in the manufacture
of hot melt adhesives.
P–07–0383
04/16/07
07/14/07
CBI
(G) Intermediate in the manufacture
of hot melt adhesives.
P–07–0384
04/16/07
07/14/07
CBI
(G) Intermediate in the manufacture
of hot melt adhesives.
P–07–0385
04/16/07
07/14/07
CBI
(G) Intermediate in the manufacture
of hot melt adhesives.
P–07–0386
04/17/07
07/15/07
CBI
(G) Catalyst: dispersive use
P–07–0387
04/17/07
07/15/07
Wacker chemical Corporation
P–07–0388
04/17/07
07/15/07
Wacker Chemical Corporation
(S) Textile softner; note 1–2% of the
new polymer will be in consumer
product from the 100% formulated
at the industrial sites
(S) Textile softner
P–07–0389
04/17/07
07/15/07
Henkel Corporation
P–07–0390
P–07–0391
P–07–0392
P–07–0393
04/18/07
04/18/07
04/18/07
04/19/07
07/16/07
07/16/07
07/16/07
07/17/07
CBI
CBI
CBI
Forbo Adhesives, LLC
P–07–0394
P–07–0395
04/20/07
04/23/07
07/18/07
07/21/07
CBI
CBI
P–07–0396
pwalker on PROD1PC71 with NOTICES
P–07–0380
04/20/07
07/18/07
Colonial Chemical,
Inc.
P–07–0397
04/23/07
07/21/07
CBI
P–07–0398
04/23/07
07/21/07
CBI
VerDate Aug<31>2005
17:06 May 17, 2007
Jkt 211001
PO 00000
(S) A polymerizable component in adhesive and selant formulations
(G) Defoamer
(G) Open, non-dispersive (resin)
(G) Exterior can coating
(G) Hot melt adhesive
(G) Mineral dispersion processing aid
(S) An ingredient for production of
halo-substituted
organic
compounds
(S) Drilling mud additive
(S)
Coupling
agent
for
filled
polyolefin;
compatibilizer
for
polyolefin blends with engineering
plastics
(G) Stabilizer
Frm 00031
Fmt 4703
Sfmt 4703
E:\FR\FM\18MYN1.SGM
(S) 1,3-propanediaminium, 2-hydroxyN,N′-bis(2-hydroxyethyl)-N,N,N′,N′teramethyl-, dichloride
(G) Maleic anhydride grafted polyolein
(G) Oligomeric aliphatic diisocyanate
18MYN1
28050
Federal Register / Vol. 72, No. 96 / Friday, May 18, 2007 / Notices
I. 80 PREMANUFACTURE NOTICES RECEIVED FROM: 03/26/07 TO 04/27/07—Continued
Received
Date
Case No.
Projected
Notice
End Date
Manufacturer/Importer
Use
Chemical
P–07–0399
04/24/07
07/22/07
CBI
(G) Component of foam
P–07–0400
04/24/07
07/22/07
CBI
P–07–0401
04/24/07
07/22/07
P–07–0402
04/20/07
07/18/07
Scientific polymer
products, Inc.
CBI
(G) Open non-dispersive (coating material)
(G) Matrix for analysis device; open,
non-dispersive use.
(G) Additive for polymers
P–07–0403
04/25/07
07/23/07
P–07–0404
04/25/07
P–07–0405
(S) Lubricant for nylon and plastic
07/23/07
Struktol Company of
America
CBI
04/25/07
07/23/07
CBI
(G) Pigment for ink
P–07–0406
04/26/07
07/24/07
CBI
(G) A destructive use in energy production.
P–07–0407
04/26/07
07/24/07
CBI
(G) Component of foam
In Table II of this unit, EPA provides
the following information (to the extent
(G) Pigment for ink
(G) Fatty acid polymer with aliphatic
diol and aromatic
(G) Aliphatic polyurethane resin
(S) 2-propenoic acid, 2-methyl, 2-hydroxyethyl ester, homopolymer
(G) Alkylphenoxy naphthalic acid
amide, N-alkylphenyl(G) Adipamide
(G) Substituted quinacridone, substituted phthalimidomethyl derivatives
(G)
Substituted
quinacridone,
aminophthalimidomethyl derivatives
(S) Benzenesulfonic acid, C10–16-alkyl
derivates, reaction products with
aluminum
hydroxide
oxide
(a1(oh)o)
(G) Fatty acid polymer with aliphatic
diol and aromatic diacid
that such information is not claimed as
CBI) on the TME received:
II. 1 TEST MARKETING EXEMPTION NOTICES RECEIVED FROM: 03/26/07 TO 04/27/07
T–07–0012
03/30/07
Projected
Notice
End Date
Manufacturer/Importer
05/13/07
Received
Date
Case No.
Cytec Industries Inc.
In Table III of this unit, EPA provides
the following information (to the extent
that such information is not claimed as
Use
Chemical
(G) Coatings resin
(G) Acrylated aliphatic polyurethane
CBI) on the Notices of Commencement
to manufacture received:
III. 42 NOTICES OF COMMENCEMENT FROM: 03/26/07 TO 04/27/07
Case No.
Received Date
Commencement
Notice End Date
pwalker on PROD1PC71 with NOTICES
P–00–1051
P–01–0862
P–02–0228
P–02–0604
P–04–0369
P–06–0021
P–06–0220
P–06–0232
P–06–0429
P–06–0435
P–06–0478
P–06–0524
P–06–0538
P–06–0549
P–06–0550
P–06–0665
04/10/07
04/17/07
03/30/07
04/23/07
04/09/07
04/02/07
04/18/07
04/20/07
04/13/07
04/13/07
04/23/07
04/25/07
04/03/07
03/28/07
03/28/07
04/09/07
03/29/07
03/21/07
03/02/07
04/07/07
03/29/07
03/27/07
03/18/07
04/06/07
04/05/07
04/01/07
03/22/07
03/29/07
03/30/07
03/13/07
03/13/07
03/27/07
P–06–0673
P–06–0695
P–06–0724
P–06–0737
P–06–0746
04/23/07
04/25/07
04/04/07
04/24/07
04/04/07
04/13/07
04/20/07
03/02/07
04/13/07
03/02/07
VerDate Aug<31>2005
17:06 May 17, 2007
Jkt 211001
PO 00000
Chemical
(G) Polyol fatty acid ester
(G) Ethoxylated alkylsulfate, substituted alkylamine salt
(G) dioxaspriro(4,5)-decane, 8,8-dimethyl -(1-metlethyl)
(G) Acrylic copolymer
(G) Ketoester
(G) Substituted metallized organic dye
(G) Methacrylic acid, polymer with acrylic and methacrylic acid derivatives
(G) Substituted polyaryl sulfonium compound
(G) Polyoxyalkylene siloxane
(G) Hydridosiloxane
(G) Fluoroalkyl acrylate copolymer
(S) Propanesulfonic acid, 1(or 2)-hydroxy-, monosodium salt
(G) Alkyl substituted pyridone azo anthraquinone compound
(G) Quaternized styrene polymer
(G) Quaternized styrene polymer
(G)
Alkenedioic
acid,
dialkyl
ester,
reaction
products
with
polyaminocarbomonocycle and alkenoic acid alkyl ester
(G) Silylated polymer
(G) Isocyanate terminated adduct of polymeric isocyanate with an amine silane
(S) Butanamide, 2-ethyl-N-methyl-N-(3-methylphenyl)(G) Substituted melamine
(S) Pyridine, 2-(2,4-dimethylcyclohexyl)-
Frm 00032
Fmt 4703
Sfmt 4703
E:\FR\FM\18MYN1.SGM
18MYN1
Federal Register / Vol. 72, No. 96 / Friday, May 18, 2007 / Notices
28051
III. 42 NOTICES OF COMMENCEMENT FROM: 03/26/07 TO 04/27/07—Continued
Case No.
Commencement
Notice End Date
Received Date
P–06–0756
04/23/07
04/05/07
P–06–0763
P–06–0766
03/28/07
04/10/07
03/07/07
03/15/07
P–06–0781
P–06–0804
P–07–0021
P–07–0050
P–07–0059
P–07–0078
P–07–0088
P–07–0099
03/27/07
04/18/07
04/04/07
04/04/07
04/05/07
03/26/07
04/10/07
04/02/07
03/09/07
03/27/07
04/02/07
03/15/07
03/22/07
03/05/07
03/30/07
03/25/07
P–07–0104
P–07–0124
04/05/07
04/02/07
03/02/07
03/26/07
P–07–0127
P–07–0140
03/23/07
04/23/07
03/19/07
03/26/07
P–07–0142
P–07–0150
P–07–0151
P–07–0160
P–91–0085
04/25/07
04/10/07
04/24/07
04/12/07
04/18/07
03/28/07
03/29/07
04/12/07
04/08/07
01/04/01
P–91–1084
04/04/07
03/27/07
List of Subjects
Environmental protection, Chemicals,
Premanufacturer notices.
Dated: May 10, 2007.
Todd S. Holderman,
Acting Director, Information Management
Division, Office of Pollution Prevention and
Toxics.
[FR Doc. E7–9596 Filed 5–17–07; 8:45 am]
BILLING CODE 6560–50–S
EXPORT-IMPORT BANK OF THE
UNITED STATES
pwalker on PROD1PC71 with NOTICES
Notice of Open Special Meeting of the
Sub-Saharan Africa Advisory
Committee (SAAC) of the ExportImport Bank of the Untied States
(Export-Import Bank)
SUMMARY: The Sub-Saharan Africa
Advisory Committee was established by
Public Law 105–121, November 26,
1997, to advise the Board of Directors on
the development and implementation of
policies and programs designed to
support the expansion of the Bank’s
financial commitments in Sub-Saharan
Africa under the loan, guarantee and
insurance programs of the Bank.
Further, the committee shall make
recommendations on how the Bank can
VerDate Aug<31>2005
17:06 May 17, 2007
Jkt 211001
Chemical
(G) 2-propenoic acid, 2-methyl-, 2-(dimethylamino)ethyl ester, polymer wiyh
alkyl 2-propenoate, ethenylbenzene and 2-hydroxyethyl 2-propenoate, acetate (salt) formate (salt)
(S) Aspartic acid, N-[(1S)-1,2-dicarboxyethyl]-3-hydroxy-, tetrasodium salt
(G) Sodium, bis((substituted)-(sulfonatocarbocycleamino)-triazine-yl]amino)sulfonatostilbene
(G) Substituted disbasic ester
(G) Polyurethane prepolymer
(G) Phenol, 2,4-bis(1,1-branched alkyl)-, phosphate (3:1)
(G) Polyester polyurethane resin based on 1,5-naphthylene diisocyanate.
(G) Cyclic acrylic polymer, peroxide initiated
(G) Acrylic polymer salt with vinyl compound, salts
(G) Tdi/ppg ether prepolymer
(G) Substituted carbopolycycle, polymer with substituted alkane and trialkylene
glycol, substituted epoxy alkyl ester
(G) Mixed esters of diacids with alcohols and acid-alcohols
(S) Siloxanes and silicones, di-me, 3-(2-hydroxyethoxy)??propyl group-terminated, polymers with 5-amino-1,3,3-trimethylcyclohexanemethanamine, di-et
carbonate, 1,6-hexanediol and 1,1′-methylenebis[4-isocyanatocyclohexane],
me et ketone oxime-blocked
(G) Acrylic copolymer
(G)
Quino
[2,3-b]acridine-7,14-dione,
5,12-dihydro-ar-[4-[[2(sulfooxy)ethyl]substituted]phenyl]-, monosodium salt
(G) Amine modified phenol formaldehyde polymer
(G) Dimer fatty acid based polyester polyurethane
(G) Arylacrylate
(G) Organosilane derivative
(S) 3-(1-methylethyl)-bicyclo(2.2.1)hept-5-ene-2-carboxylic acid, ethyl ester; mixture of (2-exo,3-endo) and (2-endo, 3-exo)
(S) Fatty acids, C18-unsaturated, dimers, mixed esters with octanoic acid, decanoic acid and trimethylolpropane
facilitate greater support by U.S.
commercial banks for trade with SubSaharan Africa.
Time and Place: June 6, 2007 at 9:30
to 1 p.m. the meeting will be held at the
Export-Import Bank in Room 1143, 811
Vermont Avenue, NW., Washington, DC
20571.
Agenda: The meeting will include a
general discussion as to encouraging
more U.S. companies to market
themselves in Africa; review of the 2006
Competitiveness Report; update on the
2006 SAAC recommendations to the
Bank and a report on recent Africa
focused international business
development efforts as well as the
Africa IBD plans for the balance of the
fiscal year.
Public participation: The meeting will
be open to public participation, and the
last 10 minutes will be set aside for oral
questions or comments. Members of the
public may also file written statement(s)
before or after the meeting. If any person
wishes auxiliary aids (such as a sign
language interpreter) or other special
accommodations, please contact, prior
to June 6, 2007, Barbara Ransom, Room
1241, 811 Vermont Avenue, NW.,
Washington, DC 20571, Voice: (202)
565–3525 or TDD (202) 565–3377.
PO 00000
Frm 00033
Fmt 4703
Sfmt 4703
For further
information, contact Barbara Ransom,
Room 707, 811 Vermont Avenue, NW.,
Washington, DC 20571, (202) 565–3525.
FOR FURTHER INFORMATION:
Kamil Cook,
Deputy General Counsel.
[FR Doc. 07–2478 Filed 5–17–07; 8:45am]
BILLING CODE 6690–01–M
FEDERAL RESERVE SYSTEM
Sunshine Act Meeting
Board of
Governors of the Federal Reserve
System.
TIME AND DATE: 9:30 a.m., Wednesday,
May 23, 2007.
PLACE: Marriner S. Eccles Federal
Reserve Board Building, 20th Street
entrance between Constitution Avenue
and C Streets, N.W., Washington, D.C.
20551.
STATUS: Open.
We ask that you notify us in advance
if you plan to attend the open meeting
and provide your name, date of birth,
and social security number (SSN) or
passport number. You may provide this
information by calling (202) 452–2474
or you may register online. You may
pre–register until close of business May
AGENCY HOLDING THE MEETING:
E:\FR\FM\18MYN1.SGM
18MYN1
]]>Agencies
[Federal Register Volume 72, Number 96 (Friday, May 18, 2007)]
[Notices]
[Pages 28045-28051]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: E7-9596]
-----------------------------------------------------------------------
ENVIRONMENTAL PROTECTION AGENCY
[EPA-HQ-OPPT-2007-0394; FRL-8131-5]
Certain New Chemicals; Receipt and Status Information
AGENCY: Environmental Protection Agency (EPA).
ACTION: Notice.
-----------------------------------------------------------------------
SUMMARY: Section 5 of the Toxic Substances Control Act (TSCA) requires
any person who intends to manufacture (defined by statute to include
import) a new chemical (i.e., a chemical not on the TSCA Inventory) to
notify EPA and comply with the statutory provisions pertaining to the
manufacture of new chemicals. Under sections 5(d)(2) and 5(d)(3) of
TSCA, EPA is required to publish a notice of receipt of a
premanufacture notice (PMN) or an application for a test marketing
exemption (TME), and to publish periodic status reports on the
chemicals under review and the receipt of notices of commencement to
manufacture those chemicals. This status report, which covers the
period from March 26, 2007 to April 27, 2007, consists of the PMNs and
TMEs, both pending or expired, and the notices of commencement to
manufacture a new chemical that the Agency has received under TSCA
section 5 during this time period.
DATES: Comments identified by the specific PMN number or TME number,
must be received on or before June 18, 2007.
ADDRESSES: Submit your comments, identified by docket identification
(ID) number EPA-HQ-OPPT-2007-0394, by one of the following methods.
Federal eRulemaking Portal: https://www.regulations.gov.
Follow the on-line instructions for submitting comments.
Mail: Document Control Office (7407M), Office of Pollution
Prevention and Toxics (OPPT), Environmental Protection Agency, 1200
Pennsylvania Ave., NW., Washington, DC 20460-0001.
Hand Delivery: OPPT Document Control Office (DCO), EPA
East Bldg., Rm. 6428, 1201 Constitution Ave., NW., Washington, DC.
Attention: Docket ID number EPA-HQ-OPPT-2007-0394. The DCO is open from
8 a.m. to 4 p.m., Monday through Friday, excluding legal holidays. The
telephone number for the DCO is (202) 564-8930. Such deliveries are
only accepted during the Docket's normal hours of operation, and
special arrangements should be made for deliveries of boxed
information.
Instructions: Direct your comments to docket ID number EPA-HQ-OPPT-
2007-0394. EPA's policy is that all comments received will be included
in the public docket without change and may be made available online at
https://www.regulations.gov, including any personal information
provided, unless the comment includes information claimed to be
Confidential Business Information (CBI) or other information whose
disclosure is restricted by statute. Do not submit information that you
consider to be CBI or otherwise protected through regulations.gov or e-
mail. The regulations.gov website is an ``anonymous access'' systems,
which means EPA will not know your identity or contact information
unless you provide it in the body of your comment. If you send an e-
mail comment directly to EPA without going through regulations.gov your
e-mail address will be automatically captured and included as part of
the comment that is placed in the public docket and made available on
the Internet. If you submit an electronic comment, EPA recommends that
you include your name and other contact information in the body of your
comment and with any disk or CD ROM you submit. If EPA cannot read your
comment due to technical difficulties and cannot contact you for
clarification, EPA may not be able to consider your comment. Electronic
files should avoid the use of special characters, any form of
encryption, and be free of any defects or viruses. For additional
information about EPA's public docket, visit the EPA Docket Center
homepage at https://www.epa.gov/epahome/dockets.htm.
Docket: All documents in the docket are listed in the docket's
index available in regulations.gov. To access the electronic docket, go
to https://www.regulations.gov, select ``Advanced Search,'' then
``Docket Search.'' Insert the docket ID number where indicated and
select the ``Submit'' button. Follow the instructions on the
regulations.gov web site to view the docket index or access available
documents. Although listed in the index, some information is not
publicly available, e.g., Confidential Business Information (CBI) or
other information whose disclosure is restricted by statute. Certain
other material, such as copyrighted material, will be publicly
available only in hard copy. Publicly available docket materials are
available electronically at https://www.regulations.gov, or, if only
available in hard copy, at the OPPT Docket. The OPPT Docket is located
in the EPA Docket Center (EPA/DC) at Rm. 3334, EPA West Bldg., 1301
Constitution Ave., NW., Washington, DC. The EPA/DC Public Reading Room
hours of operation are 8:30 a.m. to 4:30 p.m., Monday through Friday,
excluding Federal holidays. The telephone numberof the EPA/DC Public
Reading Room is (202) 566-1744, and the telephone number for the OPPT
Docket is (202) 566-0280. Docket visitors are required to show
photographic identification, pass through a metal detector, and sign
the EPA visitor log. All visitor bags are processed through an X-ray
machine and subject to search. Visitors will be provided an EPA/DC
badge that must be visible at all times in the building and returned
upon departure.
FOR FURTHER INFORMATION CONTACT: Colby Lintner, Regulatory
Coordinator, Environmental Assistance Division, Office of Pollution
Prevention and Toxics (7408M), Environmental Protection Agency, 1200
Pennsylvania Ave., NW., Washington, DC 20460-0001; telephone number:
(202) 554-1404; e-mail address: TSCA-Hotline@epa.gov.
SUPPLEMENTARY INFORMATION:
I. General Information
A. Does this Action Apply to Me?
This action is directed to the public in general. As such, the
Agency has not attempted to describe the specific entities that this
action may apply to. Although others may be affected, this action
applies directly to the submitter of the premanufacture notices
addressed in the action. If you have any questions regarding the
applicability of this action to a particular entity, consult the person
listed under FOR FURTHER INFORMATION CONTACT.
[[Page 28046]]
B. What Should I Consider as I Prepare My Comments for EPA?
1. Submitting CBI. Do not submit this information to EPA through
regulations.gov or e-mail. Clearly mark the part or all of the
information that you claim to be CBI. For CBI information in a disk or
CD ROM that you mail to EPA, mark the outside of the disk or CD ROM as
CBI and then identify electronically within the disk or CD ROM the
specific information that is claimed CBI). In addition to one complete
version of the comment that includes information claimed as CBI, a copy
of the comment that does not contain the information claimed as CBI
must be submitted for inclusion in the public docket. Information so
marked will not be disclosed except in accordance with procedures set
forth in 40 CFR part 2.
2. Tips for preparing your comments. When submitting comments,
remember to:
i. Identify the document by docket number and other identifying
information (subject heading, Federal Register date and page number).
ii. Follow directions. The agency may ask you to respond to
specific questions or organize comments by referencing a Code of
Federal Regulations (CFR) part or section number.
iii. Explain why you agree or disagree; suggest alternatives and
substitute language for your requested changes.
iv. Describe any assumptions and provide any technical information
and/or data that you used.
v. If you estimate potential costs or burdens, explain how you
arrived at the estimate.
vi. Provide specific examples to illustrate your concerns, and
suggested alternatives.
vii. Explain your views as clearly as possible, avoiding the use of
profanity or personal threats.
viii. Make sure to submit your comments by the comment period
deadline identified.
II. Why is EPA Taking this Action?
Section 5 of TSCA requires any person who intends to manufacture
(defined by statute to include import) a new chemical (i.e., a chemical
not on the TSCA Inventory to notify EPA and comply with the statutory
provisions pertaining to the manufacture of new chemicals. Under
sections 5(d)(2) and 5(d)(3) of TSCA, EPA is required to publish a
notice of receipt of a PMN or an application for a TME and to publish
periodic status reports on the chemicals under review and the receipt
of notices of commencement to manufacture those chemicals. This status
report, which covers the period from March 26, 2007 to April 27, 2007,
consists of the PMNs and TMEs, both pending or expired, and the notices
of commencement to manufacture a new chemical that the Agency has
received under TSCA section 5 during this time period.
III. Receipt and Status Report for PMNs and TMEs
This status report identifies the PMNs and TMEs, both pending or
expired, and the notices of commencement to manufacture a new chemical
that the Agency has received under TSCA section 5 during this time
period. If you are interested in information that is not included in
the following tables, you may contact EPA as described in Unit II. to
access additional non-CBI information that may be available.
In Table I of this unit, EPA provides the following information (to
the extent that such information is not claimed as CBI) on the PMNs
received by EPA during this period: the EPA case number assigned to the
PMN; the date the PMN was received by EPA; the projected end date for
EPA's review of the PMN; the submitting manufacturer; the potential
uses identified by the manufacturer in the PMN; and the chemical
identity.
I. 80 Premanufacture Notices Received From: 03/26/07 to 04/27/07
--------------------------------------------------------------------------------------------------------------------------------------------------------
Projected Notice End
Case No. Received Date Date Manufacturer/Importer Use Chemical
--------------------------------------------------------------------------------------------------------------------------------------------------------
P-07-0319 03/26/07 06/23/07 CBI (G) Raw material for (G) Alkylamino
polymer paint alcohol
additive
P-07-0326 03/26/07 06/23/07 CBI (G) Paint additive (G) Polyurethane
P-07-0327 03/26/07 06/23/07 CBI (G) Antioxidant (G) Ncs 1:
Substituted phenol
P-07-0328 03/26/07 06/23/07 CBI (G) Antioxidant (G) Ncs 2:
Substituted phenol
P-07-0329 03/26/07 06/23/07 CIBA Specialty (G) Ultra violet (G) Derivative of 2,4-
Chemicals stabilizer for dihydroxy
Corporation coatings benzophenone
P-07-0330 03/28/07 06/25/07 3M Company (G) Film coating (G) Surface modified
additive ceramic materials
and wares, chemicals
P-07-0331 03/28/07 06/25/07 CBI (S) Hardener for (G) 1,2-
architectural ethanediamine, N1-(2-
coatings; hardener aminoethyl)-,
for metal primers reaction products
for maintenance with glycidyl
coatings aromatic ether
P-07-0332 03/28/07 06/25/07 3M Company (G) Surface modifier (G) Alkyloxy
carboxylic acid
P-07-0333 03/29/07 06/26/07 CBI (G) Open non- (G) Aromatic
dispersive resin isocyanate
prepolymer
P-07-0334 03/28/07 06/25/07 Cytec Industries Inc. (G) Coatings resin (G) Acrylated
aliphatic
polyurethane
P-07-0335 03/30/07 06/27/07 CBI (G) Adhesive for (G) Epoxy resin
electrical parts
P-07-0336 04/02/07 06/30/07 The Dow Chemical (G) One-component (G) Polymeric mdi
Company foaming adhesives prepolymer based on
and sealants for poly(oxyethylene-co-
roofing and oxypropylene) triol
construction and amine initiated
tetrol
P-07-0337 04/02/07 06/30/07 CBI (G) Open non- (G) Polyester
dispersive (sizing polyurethane
agent)
P-07-0338 04/02/07 06/30/07 CBI (G) Open non- (G) Aliphatic
dispersion polyurethane resin
(coatings)
P-07-0339 03/29/07 06/26/07 Ashland Inc., (G) Ink, coating, (G) Polyacrylate
Environmental Health adhesive oligomer product
and Safety from base-catalyzed
reaction of
dipropylene gylcol
diacrylate, genomer
3364 amine-modified
polyacrylate,
ethoxylated
trimethylol propane
triacrylate and
.beta.-ketoester
[[Page 28047]]
P-07-0340 03/29/07 06/26/07 Ashland Inc., (G) Ink, coating, (G) Polyacrylate
Environmental Health adhesive oligomer product
and Safety from base-catalyzed
reaction of 1,6-
hexanediol
diacrylate, genomer
3364 amine-modified
polyacrylate,
ethoxylated
trimethylol propane
triacrylate and
.beta.-ketoester
P-07-0341 03/29/07 06/26/07 Ashland Inc., (G) Ink, coating, (G) Polyacrylate
Environmental Health adhesive oligomer product
and Safety from base-catalyzed
reaction of
dipropylene gylcol
diacrylate, ebecryl
81 amine-modified
polyacrylate,
ethoxylated
trimethylol propane
triacrylate and
.beta.-ketoester
P-07-0342 03/29/07 06/26/07 Ashland Inc., (G) Ink, coating, (G) Polyacrylate
Environmental Health adhesive oligomer product
and Safety from base-catalyzed
reaction of 1,6-
hexanediol
diacrylate, ebecryl
81 amine-modified
polyacrylate,
ethoxylated
trimethylol propane
triacrylate and
.beta.-ketoester
P-07-0343 03/29/07 06/26/07 Ashland Inc., (G) Ink, coating, (G) Polacrylate
Environmental Health adhesive oligomer product
and Safety from base-catalyzed
reaction of
dipropylene gylcol
diacrylate, genomer
3364 amine-modified
polyacrylate,
ethoxylated
trimethylol propane
triacrylate and
.beta.-ketoester
P-07-0344 03/29/07 06/26/07 Ashland Inc., (G) Ink, coating, (G) Polyacrylate
Environmental Health adhesive oligomer product
and Safety from base-catalyzed
reaction of
ethoxylated 1,6-
hexanediol
diacrylate, genomer
3364 amine-modified
polyacrylate,
ethoxylated
trimethylol propane
triacrylate and
.beta.-ketoester
P-07-0345 04/02/07 06/30/07 CBI (G) Component of (G)
manufactured Spiro[isobenzofuran-
consumer article- 1(3H),polyheterocycl
contained use e]-3-one, 3'-[(4-
fluoro-2-
methylphenyl)amino]-
6'-[(2-
fluorophenyl)amino]-
P-07-0346 03/29/07 06/26/07 Shin-etsu Silicones (S) Additive of (S) Siloxanes and
of America Inc. adhesives for silicones, hydroxy
building materials me 3-hydroxypropyl
me, me (1-
oxododecyl)oxy,
esters with C12 20
fatty acids, esters
with polyethylene-
polypropylene glycol
mono-bu ether
P-07-0347 04/02/07 06/30/07 CBI (S) Organic synthesis (G)
intermediate Spiro[isobenzofuran-
1(3h),polyheterocycl
e]-3-one, 3'-chloro-
6'-[(4-fluoro-2-
methylphenyl)amino]-
P-07-0348 04/03/07 07/01/07 CBI (G) Packaging (G) Copolymer based
on sulfonic acid
monomer
P-07-0349 04/03/07 07/01/07 3M (G) Fluorinated (G) Fluorinated
additive for alkylammonium salt
polymers
P-07-0350 04/03/07 07/01/07 Incorez Corporation (S) Binder, coating (G) Aqueous aliphatic
or modifying resin anionio polyunethane
used in the dispersion
manufacture of
coatings for wood,
plastic and
cementitous
substrates
P-07-0351 04/04/07 07/02/07 CBI (G) Component of (G) Carbomonocycle,
manufactured bis[(4-
consumer article - methylphenoxy)methyl
contained use ]-
P-07-0352 04/04/07 07/02/07 CBI (G) Coating component (G) Modified polymer
of substituted
acrylate and alkyl
methacrylates
P-07-0353 04/05/07 07/03/07 3M Company (G) Chemical (G) Alkyl acid
intermediate fluoride
P-07-0354 04/05/07 07/03/07 E.I. Dupont De (S) Industrial (G) N-methyl-
Nemours intermediate (amino,chloro,methyl
) carbomonocyclic
carbamide
P-07-0355 04/05/07 07/03/07 E.I. Dupont De (S) Industrial (G) 3-bromo-1-(3-
Nemours intermediate chloro-2-pyridinyl)-
1H-pyrazole
derivative
P-07-0356 04/04/07 07/02/07 CBI (G) Coating resin for (G) Polymer with
open, non-dispersive aliphatic
use diisocyanates,
polycarbonatediol
and
bishydroxymethylproi
onic acid
P-07-0357 04/05/07 07/03/07 Crosslink Energy (S) Conductive (G) Polyaniline
Materials, LLC coating for emeraldine salt
electrical
capacitors
[[Page 28048]]
P-07-0358 04/09/07 07/07/07 CBI (G) Open non (G) Hexitol, anhydro-
dispersive use , bis[[(1-oxo-2-
propenyl)oxy]benzoat
e], polymer with
phenylene bis[[(1-
oxo-2-
propenyl)oxy]alkyl(C
1-C10)oxy benzoate]
P-07-0359 04/09/07 07/07/07 CBI (G) An open non- (G) Halide of
dispersive use unsaturated alkyl
hydrocarbon
P-07-0360 04/09/07 07/07/07 Danisco US, Inc. (S) Hydrolysis of (G) Phytase
phytate
P-07-0361 04/10/07 07/08/07 Alberdingk boley Inc. (S) For wood coatings (G) Linseed oil,
ester with
pentaerythritol,
polymer with
hydrazine, 3-hydroxy-
2-(hydroxymethyl)2-
methylpropanoic
acid, 5-isocyanato-1-
(isocyanatomethyl)-
alkylcychexane, 1,1'-
methylenebis
[4.isocyanatocyclohe
xane] and
polypropylene
glycol,compounds
with triethylamine
P-07-0362 04/10/07 07/08/07 Dupont Company (S) Production of (G) Butylene
molded articles/ phthalate(poly-1,3-
parts; production of propyleneoxide)
filaments; phthalate copolymer
production of
extruded articles
P-07-0363 04/10/07 07/08/07 Dupont Company (S) Production of (G) Butylene
molded articles/ phthalate(poly-1,3-
parts; production of propyleneoxide)
filaments; phthalate copolymer
production of
extruded articles
P-07-0364 04/10/07 07/08/07 Dupont Company (S) Production of (G) Butylene
molded articles/ phthalate(poly-1,3-
parts; production of propyleneoxide)
filaments; phthalate copolymer
production of
extruded articles
P-07-0365 04/10/07 07/08/07 Dupont Company (S) Production of (G) Butylene
molded articles/ phthalate(poly-1,3-
parts; production of propyleneoxide)
filaments; phthalate copolymer
production of
extruded articles
P-07-0366 04/10/07 07/08/07 CBI (S) Precursor for use (G) Metal alkyl amide
in semiconductor
processing
P-07-0367 04/10/07 07/08/07 CBI (G) Lubricant (G) Fluorinated zinc
additive dialkyldthiophosphat
e
P-07-0368 04/04/07 07/02/07 Henkel Corporation (G) Adhesive (G) Phenol,
component substituted-,
polymer with
substituted oxirane
and substituted
thiol
P-07-0369 04/10/07 07/08/07 Robertet, Inc. (S) As an odoriferous (S) Oils, poplar,
component of populus nigra
fragrance compounds
P-07-0370 04/11/07 07/09/07 CBI (G) Catalyst of (G) Glycol phosphite
polyurethane foam
manufacture
P-07-0372 04/12/07 07/10/07 CBI (S) Colorant in (G) Amine derivative
thermoplastics of ci pigment yellow
138
P-07-0373 04/12/07 07/10/07 CBI (S) Colorant in (G) Counterion of
thermoplastics sulfonated ci
pigment yellow 138
P-07-0374 04/12/07 07/10/07 CBI (S) Colorant in (G) Oligomeric
thermoplastics; hindered amine
colorant in coatings/ derivative of ci
paints pigment yellow 138
P-07-0375 04/12/07 07/10/07 J.M. Huber (S) Flame retardant (G) Aluminum
Corporation trihydrate surface
treated
P-07-0376 04/12/07 07/10/07 Boulder Scientific (S) Chemical (S) 1,2-
Company intermediate cyclohexanedicarboxy
lic acid, (1r,2r)-re-
P-07-0377 04/12/07 07/10/07 Neste Oil (S) Renewable diesel (G) Alkanes, branched
fuel to be blended and linear
with conventional
diesel
P-07-0378 04/13/07 07/11/07 Renosol Systems, (S) Reactive (G)
L.L.C. component in a Methylenebisisocyana
polyol mixture tocarbomonocycle,
subsequently reacted reaction product
with an isocyanate with
to mold polyurethane polyalkyloxirane and
foam; reactive oligomeric
component in a hydroxyalkenyl ester
polyol mixture sold
with an isocyanate
to mold polyurethane
articles.
P-07-0379 04/16/07 07/14/07 Henkel Corporation (S) A polymerizable (S) Ethanol, 2,2',2''-
component of nitrilotris-,
adhesive and sealant polymer with .alpha.-
formulations hydro-.omega.-
hydroxypoly(oxy-1,4-
butanediyl) and 1,1'-
methylenebis[4-
isocyanatocyclohexan
e], 2-hydroxyethyl
acrylate-blocked
[[Page 28049]]
P-07-0380 04/16/07 07/14/07 CBI (G) Intermediate in (S) Fatty acids, C18-
the manufacture of unsaturated, dimers,
hot melt adhesives. polymers with
ethylenediamine, 12-
hydroxyoctadecanoic
acid, 4-methyl-1,3-
dioxolan-2-one,
piperazine,
polypropylene glycol
diamine and stearic
acid
P-07-0381 04/16/07 07/14/07 CBI (G) Intermediate in (S) Fatty acids, C18-
the manufacture of unsaturated, dimers,
hot melt adhesives. polymers with
ethylenediamine, 12-
hydroxyoctadecanoic
acid, 4-methyl-1,3-
dioxolan-2-one,
piperazine,
polypropylene glycol
diamine and tall-oil
fatty acids
P-07-0382 04/16/07 07/14/07 CBI (G) Intermediate in (S) Fatty acids, C18-
the manufacture of unsaturated, dimers,
hot melt adhesives. polymers with
ethylenediamine, 12-
hydroxyoctadecanoic
acid, 4-methyl-1,3-
dioxolan-2-one,
piperazine,
polypropylene glycol
diamine, sebacic
acid and stearic
acid
P-07-0383 04/16/07 07/14/07 CBI (G) Intermediate in (S) Fatty acids, C18-
the manufacture of unsaturated, dimers,
hot melt adhesives. polymers with
ethylenediamine, 12-
hydroxyoctadecanoic
acid, 4-methyl-1,3-
dioxolan-2-one,
piperazine,
polypropylene glycol
diamine, sebacic
acid and tall-oil
fatty acids
P-07-0384 04/16/07 07/14/07 CBI (G) Intermediate in (S) Fatty acids, C18-
the manufacture of unsaturated, dimers,
hot melt adhesives. hydrogenated,
polymers with
ethylenediamine, 12-
hydroxyoctadecanoic
acid, 4-methyl-1,3-
dioxolan-2-one,
piperazine,
polypropylene glycol
diamine and stearic
acid
P-07-0385 04/16/07 07/14/07 CBI (G) Intermediate in (S) Fatty acids, C18-
the manufacture of unsaturated, dimers,
hot melt adhesives. polymers with
ethylenediamine,
hexamethylenediamine
, 12-
hydroxyoctadecanoic
acid, 4-methyl-1,3-
dioxolan-2-one,
piperazine,
polypropylene glycol
diamine and stearic
acid
P-07-0386 04/17/07 07/15/07 CBI (G) Catalyst: (G) Heteropolycycle
dispersive use alkyl ether sulfate
salt
P-07-0387 04/17/07 07/15/07 Wacker chemical (S) Textile softner; (S)
Corporation note 1-2% of the new polydimethylsilozxan
