Delegation of National Emission Standards for Hazardous Air Pollutants for Source Categories; State of Arizona, Arizona Department of Environmental Quality; State of Nevada, Nevada Division of Environmental Protection, 25980-25985 [E7-8686]
Download as PDF
<![CDATA[
25980
Federal Register / Vol. 72, No. 88 / Tuesday, May 8, 2007 / Rules and Regulations
2007, certifying that there are no
commercial and industrial solid waste
incineration units subject to 40 CFR part
60, subpart EEEE.
Subpart R—Kansas
3. Subpart R is amended by adding an
undesignated center heading and
§ 62.4182 to read as follows:
I
Air Emissions From Existing ‘‘Other’’
Solid Waste Incineration Units
§ 62.4182 Identification of plan—negative
declaration.
Letter from the Kansas Department of
Health and Environment submitted
December 7, 2006, certifying that there
are no ‘‘other’’ solid waste incineration
units subject to 40 CFR part 60, subpart
EEEE.
Subpart AA—Missouri
4. Subpart AA is amended by adding
an undesignated center heading and
§ 62.6361 to read as follows:
I
Air Emissions From Existing ‘‘Other’’
Solid Waste Incineration Units
§ 62.6361 Identification of plan—negative
declaration.
Letter from the Missouri Department
of Natural Resources submitted April 7,
2006, certifying that there are no
‘‘other’’ solid waste incineration units
subject to 40 CFR part 60, subpart EEEE.
[FR Doc. E7–8807 Filed 5–7–07; 8:45 am]
BILLING CODE 6560–50–P
ENVIRONMENTAL PROTECTION
AGENCY
40 CFR Part 63
[EPA–R09–OAR–2007–0322; FRL–8309–7]
Delegation of National Emission
Standards for Hazardous Air Pollutants
for Source Categories; State of
Arizona, Arizona Department of
Environmental Quality; State of
Nevada, Nevada Division of
Environmental Protection
Environmental Protection
Agency (EPA).
ACTION: Direct final rule.
cprice-sewell on PROD1PC66 with RULES
AGENCY:
SUMMARY: EPA is amending certain
regulations to reflect the current
delegation status of national emission
standards for hazardous air pollutants
(NESHAP) in Arizona and Nevada.
Several NESHAP were delegated to the
Arizona Department of Environmental
Quality on March 16, 2007, and to the
Nevada Division of Environmental
Protection on January 12, 2007. The
VerDate Aug<31>2005
14:51 May 07, 2007
Jkt 211001
purpose of this action is to update the
listing in the Code of Federal
Regulations.
SUPPLEMENTARY INFORMATION:
This rule is effective on July 9,
2007 without further notice, unless EPA
receives adverse comments by June 7,
2007. If we receive such comments, we
will publish a timely withdrawal in the
Federal Register to notify the public
that this direct final rule will not take
effect.
Table of Contents
I. Background
A. Delegation of NESHAP
B. ADEQ Delegations
C. NDEP delegations
II. EPA Action
III. Statutory and Executive Order Reviews
Submit comments,
identified by docket number EPA–R09–
OAR–2007–0322, by one of the
following methods:
1. Federal eRulemaking Portal:
www.regulations.gov. Follow the on-line
instructions.
2. E-mail: steckel.andrew@epa.gov.
3. Mail or delivery: Andrew Steckel
(Air–4), U.S. Environmental Protection
Agency Region IX, 75 Hawthorne Street,
San Francisco, CA 94105–3901.
Instructions: All comments will be
included in the public docket without
change and may be made available
online at www.regulations.gov,
including any personal information
provided, unless the comment includes
Confidential Business Information (CBI)
or other information whose disclosure is
restricted by statute. Information that
you consider CBI or otherwise protected
should be clearly identified as such and
should not be submitted through
www.regulations.gov or e-mail.
www.regulations.gov is an ‘‘anonymous
access’’ system, and EPA will not know
your identity or contact information
unless you provide it in the body of
your comment. If you send e-mail
directly to EPA, your e-mail address
will be automatically captured and
included as part of the public comment.
If EPA cannot read your comment due
to technical difficulties and cannot
contact you for clarification, EPA may
not be able to consider your comment.
Docket: The index to the docket for
this action is available electronically at
www.regulations.gov and in hard copy
at EPA Region IX, 75 Hawthorne Street,
San Francisco, California. While all
documents in the docket are listed in
the index, some information may be
publicly available only at the hard copy
location (e.g., copyrighted material), and
some may not be publicly available in
either location (e.g., CBI). To inspect the
hard copy materials, please schedule an
appointment during normal business
hours with the contact listed in the FOR
FURTHER INFORMATION CONTACT section.
A. Delegation of NESHAP
DATES:
ADDRESSES:
Mae
Wang, EPA Region IX, (415) 947–4124,
wang.mae@epa.gov.
FOR FURTHER INFORMATION CONTACT:
PO 00000
Frm 00036
Fmt 4700
Sfmt 4700
Throughout this document, ‘‘we,’’ ‘‘us’’
and ‘‘our’’ refer to EPA.
I. Background
Section 112(l) of the Clean Air Act, as
amended in 1990 (CAA), authorizes
EPA to delegate to state or local air
pollution control agencies the authority
to implement and enforce the standards
set out in the Code of Federal
Regulations, Title 40 (40 CFR), Part 63,
National Emission Standards for
Hazardous Air Pollutants for Source
Categories. On November 26, 1993, EPA
promulgated regulations, codified at 40
CFR Part 63, Subpart E (hereinafter
referred to as ‘‘Subpart E’’), establishing
procedures for EPA’s approval of state
rules or programs under section 112(l)
(see 58 FR 62262). Subpart E was later
amended on September 14, 2000 (see 65
FR 55810).
Any request for approval under CAA
section 112(l) must meet the approval
criteria in 112(l)(5) and Subpart E. To
streamline the approval process for
future applications, a State or local
agency may submit a one-time
demonstration that it has adequate
authorities and resources to implement
and enforce any CAA section 112
standards. If such demonstration is
approved, then the state or local agency
would no longer need to resubmit a
demonstration of these same authorities
and resources for every subsequent
request for delegation of CAA section
112 standards. However, EPA maintains
the authority to withdraw its approval if
the State does not adequately
implement or enforce an approved rule
or program.
B. ADEQ Delegations
On July 17, 1998, EPA published a
direct final action delegating to the
Arizona Department of Environmental
Quality (ADEQ) several NESHAP and
approving ADEQ’s delegation
mechanism for future standards (see 63
FR 38478). That action explained the
procedure for EPA to grant future
delegations to ADEQ by letter, with
periodic Federal Register listings of
standards that have been delegated. On
February 21, 2007, ADEQ requested
delegation of the following NESHAP
contained in 40 CFR Part 63:
E:\FR\FM\08MYR1.SGM
08MYR1
cprice-sewell on PROD1PC66 with RULES
Federal Register / Vol. 72, No. 88 / Tuesday, May 8, 2007 / Rules and Regulations
• Subpart J—NESHAP for Polyvinyl
Chloride and Copolymers Production
• Subpart MM—NESHAP for Chemical
Recovery Combustion Sources at Kraft, Soda,
Sulfite, and Stand-Alone Semichemical Pulp
Mills
• Subpart XX—National Emission
Standards for Ethylene Manufacturing
Process Units: Heat Exchange Systems and
Waste Operations
• Subpart OOO—National Emission
Standards for Hazardous Air Pollutant
Emissions: Manufacture of Amino/Phenolic
Resins
• Subpart QQQ—National Emission
Standards for Primary Copper Smelting
• Subpart RRR—National Emission
Standards for Secondary Aluminum
Production
• Subpart UUU—National Emission
Standards for Petroleum Refineries: Catalytic
Cracking, Catalytic Reforming, and Sulfur
Plan Units
• Subpart VVV—NESHAP: Publicly
Owned Treatment Works
• Subpart AAAA—National Emission
Standards for Municipal Solid Waste
Landfills
• Subpart CCCC—National Emission
Standards for Manufacturing of Nutritional
Yeast
• Subpart EEEE—National Emission
Standards for Organic Liquids Distribution
(Non-Gasoline)
• Subpart FFFF—NESHAP: Miscellaneous
Organic Chemical Manufacturing
• Subpart GGGG—National Emission
Standards for Solvent Extraction for
Vegetable Oil Production
• Subpart HHHH—National Emission
Standards for Wet-Formed Fiberglass Mat
Production
• Subpart IIII—NESHAP: Surface Coating
of Automobiles and Light–Duty Trucks
• Subpart JJJJ—NESHAP: Paper and Other
Web Coating
• Subpart KKKK—NESHAP: Surface
Coating of Metal Cans
• Subpart MMMM—NESHAP for Surface
Coating of Miscellaneous Metal Parts and
Products
• Subpart NNNN—National Emission
Standards for Large Appliances
• Subpart OOOO—NESHAP: Printing,
Coating, and Dyeing of Fabrics and Other
Textiles
• Subpart PPPP—NESHAP for Surface
Coating of Plastic Parts and Products
• Subpart QQQQ—National Emission
Standards for Wood Building Products
• Subpart RRRR—National Emission
Standards for Surface Coating of Metal
Furniture
• Subpart SSSS—National Emission
Standards for Surface Coating of Metal Coil
• Subpart TTTT—National Emission
Standards for Leather Finishing Operations
• Subpart UUUU—National Emission
Standards for Cellulose Products
Manufacturing
• Subpart VVVV—National Emission
Standards for Boat Manufacturing
• Subpart WWWW—National Emission
Standards for Reinforced Plastics Composites
Production
• Subpart XXXX—National Emission
Standards for Tire Manufacturing
VerDate Aug<31>2005
14:51 May 07, 2007
Jkt 211001
• Subpart YYYY—NESHAP for Stationary
Combustion Turbines
• Subpart ZZZZ—NESHAP for Stationary
Reciprocating Internal Combustion Engines
• Subpart AAAAA—NESHAP for Lime
Manufacturing Plants
• Subpart BBBBB—National Emission
Standards for Semiconductor Manufacturing
• Subpart CCCCC—National Emission
Standards for Coke Ovens: Pushing,
Quenching, and Battery Stacks
• Subpart EEEEE—NESHAP for Iron and
Steel Foundries
• Subpart FFFFF—National Emission
Standards for Integrated Iron and Steel
• Subpart GGGGG—NESHAP: Site
Remediation
• Subpart HHHHH—NESHAP:
Miscellaneous Coating Manufacturing
• Subpart IIIII—NESHAP: Mercury
Emissions from Mercury Cell Chlor-Alkali
Plants
• Subpart JJJJJ—National Emission
Standards for Brick and Structural Clay
Products Manufacturing
• Subpart KKKKK—NESHAP for Clay
Ceramics Manufacturing
• Subpart LLLLL—National Emission
Standards for Asphalt Roofing and
Processing
• Subpart MMMMM—National Emission
Standards for Flexible Polyurethane Foam
Fabrication Operations
• Subpart NNNNN—NESHAP:
Hydrochloric Acid Production
• Subpart PPPPP—National Emission
Standards for Engine Test Cells/Stands
• Subpart QQQQQ—National Emission
Standards for Friction Products
Manufacturing
• Subpart RRRRR—NESHAP: Taconite
Iron Ore Processing
• Subpart SSSSS—National Emission
Standards for Refractory Products
Manufacturing
• Subpart TTTTT—NESHAP for Primary
Magnesium Refining
On March 16, 2007, EPA granted
delegation to ADEQ for these NESHAP,
along with any amendments to
previously-ndash;delegated NESHAP, as
of July 1, 2004. Today’s action is serving
to notify the public of the March 16,
2007, delegation and to codify these
delegations into the Code of Federal
Regulations.
ADEQ also included a request for
delegation of the federal List of
Hazardous Air Pollutants, Petitions
Process, Lesser Quantity Designations,
Source Category List codified at 40 CFR
Part 63, Subpart C. This Subpart does
not need to be delegated under the
Clean Air Act section 112(l) approval
process. EPA does not delegate to state
or local agencies the authority to make
changes to this federal list of pollutants,
and Subpart C does not contain any
provisions or authorities requiring
implementation by state or local
agencies. As a result, EPA is not taking
action to delegate 40 CFR Part 63,
Subpart C or its amendments to ADEQ.
PO 00000
Frm 00037
Fmt 4700
Sfmt 4700
25981
C. NDEP Delegations
On May 27, 1998, EPA published a
direct final action delegating to the
Nevada Division of Environmental
Protection (NDEP) several NESHAP and
approving NDEP’s delegation
mechanism for future standards (see 63
FR 28906). That action explained the
procedure for EPA to grant delegations
to NDEP by letter, with periodic Federal
Register listings of standards that have
been delegated. On October 26, 2006,
NDEP requested delegation of the
NESHAP for Plywood and Composite
Wood Products, 40 CFR part 63, subpart
DDDD.
On January 12, 2007, EPA granted
delegation to NDEP for this NESHAP,
along with any amendments to
previously-ndash;delegated NESHAP, as
of July 1, 2006. Today’s action is serving
to notify the public of the January 12,
2007, delegations and to codify these
delegations into the Code of Federal
Regulations.
NDEP also included a request for
delegation of the Federal list of
hazardous air pollutants, codified at 40
CFR part 63, subpart C. There are no
authorities to delegate in this Subpart,
and EPA does not delegate to States the
ability to make modifications to the list.
As a result, EPA is not taking action to
delegate 40 CFR part 63, subpart C or its
amendments to NDEP.
II. EPA Action
Today’s document serves to notify the
public of the delegation of NESHAP to
ADEQ on March 16, 2007, and to NDEP
on January 12, 2007. Today’s action will
codify these delegations into the Code of
Federal Regulations.
III. Statutory and Executive Order
Reviews
Under Executive Order 12866 (58 FR
51735, October 4, 1993), this action is
not a ‘‘significant regulatory action’’ and
therefore is not subject to review by the
Office of Management and Budget. For
this reason, this action is also not
subject to Executive Order 13211,
‘‘Actions Concerning Regulations That
Significantly Affect Energy Supply,
Distribution, or Use’’ (66 FR 28355, May
22, 2001). This action merely updates
the list of approved delegations in the
Code of Federal Regulations and
imposes no additional requirements.
Accordingly, the Administrator certifies
that this rule will not have a significant
economic impact on a substantial
number of small entities under the
Regulatory Flexibility Act (5 U.S.C. 601
et seq.). Because this rule does not
impose any additional enforceable duty
beyond that required by state law, it
E:\FR\FM\08MYR1.SGM
08MYR1
25982
Federal Register / Vol. 72, No. 88 / Tuesday, May 8, 2007 / Rules and Regulations
does not contain any unfunded mandate
or significantly or uniquely affect small
governments, as described in the
Unfunded Mandates Reform Act of 1995
(Pub. L. 104–4).
This rule also does not have tribal
implications because it will not have a
substantial direct effect on one or more
Indian tribes, on the relationship
between the Federal Government and
Indian tribes, or on the distribution of
power and responsibilities between the
Federal Government and Indian tribes,
as specified by Executive Order 13175
(65 FR 67249, November 9, 2000). This
action also does not have Federalism
implications because it does not have
substantial direct effects on the States,
on the relationship between the national
government and the States, or on the
distribution of power and
responsibilities among the various
levels of government, as specified in
Executive Order 13132 (64 FR 43255,
August 10, 1999). This action merely
updates the list of alreadyndash;approved delegations, and does
not alter the relationship or the
distribution of power and
responsibilities established in the CAA.
This rule also is not subject to Executive
Order 13045 ‘‘Protection of Children
from Environmental Health Risks and
Safety Risks’’ (62 FR 19885, April 23,
1997), because it approves a state rule
implementing a Federal standard.
In reviewing State delegation
submissions, our role is to approve State
choices, provided that they meet the
criteria of the CAA. In this context, in
the absence of a prior existing
requirement for the State to use
voluntary consensus standards (VCS),
EPA has no authority to disapprove
State submissions for failure to use VCS.
It would thus be inconsistent with
applicable law for EPA, when it reviews
a State submission, to use VCS in place
of a State submission that otherwise
satisfies the provisions of the CAA.
Thus, the requirements of section 12(d)
of the National Technology Transfer and
Advancement Act of 1995 (15 U.S.C.
272 note) do not apply. This rule does
not impose an information collection
burden under the provisions of the
Paperwork Reduction Act of 1995 (44
U.S.C. 3501 et seq.).
The Congressional Review Act, 5
U.S.C. section 801 et seq., as added by
the Small Business Regulatory
Enforcement Fairness Act of 1996,
generally provides that before a rule
may take effect, the agency
promulgating the rule must submit a
rule report, which includes a copy of
the rule, to each House of the Congress
and to the Comptroller General of the
United States. EPA will submit a report
containing this rule and other required
information to the U.S. Senate, the U.S.
House of Representatives, and the
Comptroller General of the United
States prior to publication of the rule in
the Federal Register. A major rule
cannot take effect until 60 days after it
is published in the Federal Register.
This action is not a ‘‘major rule’’ as
defined by 5 U.S.C. 804(2).
Under section 307(b)(1) of the Clean
Air Act, petitions for judicial review of
this action must be filed in the United
States Court of Appeals for the
appropriate circuit by July 9, 2007.
Filing a petition for reconsideration by
the Administrator of this final rule does
not affect the finality of this rule for the
purposes of judicial review nor does it
extend the time within which a petition
for judicial review may be filed, and
shall not postpone the effectiveness of
such rule or action. This action may not
be challenged later in proceedings to
enforce its requirements (see section
307(b)(2)).
List of Subjects in 40 CFR Part 63
Environmental protection,
Administrative practice and procedure,
Air pollution control, Hazardous
substances, Intergovernmental relations,
Reporting and recordkeeping
requirements.
Authority: This action is issued under the
authority of Section 112 of the Clean Air Act,
as amended, 42 U.S.C. 412.
Date Signed: April 19, 2007.
Deborah Jordan,
Director, Air Division, Region IX.
Title 40, chapter I, part 63 of the Code
of Federal Regulations is amended as
follows:
I
PART 63—[AMENDED]
1. The authority citation for Part 63
continues to read as follows:
I
Authority: 42 U.S.C. 7401 et seq.
Subpart E—Approval of State
Programs and Delegation of Federal
Authorities
2. Section 63.99 is amended by
revising paragraphs (a)(3) and (a)(28)(i)
to read as follows:
I
§ 63.99
Delegated Federal authorities.
(a) * * *
(3) The following table lists the
specific part 63 standards that have
been delegated unchanged to the air
pollution control agencies in the State of
Arizona. The (X) symbol is used to
indicate each category that has been
delegated.
DELEGATION STATUS FOR PART 63 STANDARDS—ARIZONA
Subpart
Description
ADEQ 1
MCAQD 2
PDEQ 3
PCAQCD 4
A .............
F .............
G .............
General Provisions ....................................................................................................
Synthetic Organic Chemical Manufacturing Industry ................................................
Synthetic Organic Chemical Manufacturing Industry: Process Vents, Storage Vessels, Transfer Operations, and Wastewater.
Organic Hazardous Air Pollutants: Equipment Leaks ...............................................
Organic Hazardous Air Pollutants: Certain Processes Subject to the Negotiated
Regulation for Equipment Leaks.
Polyvinyl Chloride and Copolymers Production ........................................................
Coke Oven Batteries .................................................................................................
Perchloroethylene Dry Cleaning ................................................................................
Hard and Decorative Chromium Electroplating and Chromium Anodizing Tanks ....
Ethylene Oxide Sterilization Facilities .......................................................................
Industrial Process Cooling Towers ............................................................................
Gasoline Distribution Facilities ..................................................................................
Pulp and Paper ..........................................................................................................
Halogenated Solvent Cleaning ..................................................................................
Group I Polymers and Resins ...................................................................................
Epoxy Resins Production and Non-Nylon Polyamides Production ...........................
Secondary Lead Smelting .........................................................................................
Phosphoric Acid Manufacturing Plants .....................................................................
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
................
X
X
X
X
X
X
X
X
X
X
X
X
.................
X
X
X
X
X
X
.................
X
X
X
X
.................
cprice-sewell on PROD1PC66 with RULES
H .............
I ..............
J ..............
L .............
M ............
N .............
O .............
Q .............
R .............
S .............
T .............
U .............
W ............
X .............
AA ...........
VerDate Aug<31>2005
14:51 May 07, 2007
Jkt 211001
PO 00000
Frm 00038
Fmt 4700
Sfmt 4700
E:\FR\FM\08MYR1.SGM
08MYR1
25983
Federal Register / Vol. 72, No. 88 / Tuesday, May 8, 2007 / Rules and Regulations
DELEGATION STATUS FOR PART 63 STANDARDS—ARIZONA—Continued
Subpart
Description
ADEQ 1
MCAQD 2
PDEQ 3
PCAQCD 4
BB ...........
CC ..........
DD ..........
EE ...........
GG ..........
HH ..........
JJ ............
KK ...........
LL ...........
MM .........
Phosphate Fertilizers Production Plants ...................................................................
Petroleum Refineries .................................................................................................
Off-Site Waste and Recovery Operations .................................................................
Magnetic Tape Manufacturing Operations ................................................................
Aerospace Manufacturing and Rework Facilities ......................................................
Oil and Natural Gas Production Facilities .................................................................
Wood Furniture Manufacturing Operations ...............................................................
Printing and Publishing Industry ................................................................................
Primary Aluminum Reduction Plants .........................................................................
Chemical Recovery Combustion Sources at Kraft, Soda, Sulfite, and Stand-Alone
Semichemical Pulp Mills.
Tanks—Level 1 ..........................................................................................................
Containers .................................................................................................................
Surface Impoundments .............................................................................................
Individual Drain Systems ...........................................................................................
Closed Vent Systems, Control Devices, Recovery Devices and Routing to a Fuel
Gas System or a Process.
Equipment Leaks—Control Level 1 ...........................................................................
Equipment Leaks—Control Level 2 ...........................................................................
Oil-Water Separators and Organic-Water Separators ..............................................
Storage Vessels (Tanks)—Control Level 2 ...............................................................
Ethylene Manufacturing Process Units: Heat Exchange Systems and Waste Operations.
Generic MACT Standards .........................................................................................
Steel Pickling .............................................................................................................
Mineral Wool Production ...........................................................................................
Hazardous Waste Combustors .................................................................................
Pharmaceuticals Production ......................................................................................
Natural Gas Transmission and Storage Facilities .....................................................
Flexible Polyurethane Foam Production ...................................................................
Group IV Polymers and Resins .................................................................................
Portland Cement Manufacturing Industry ..................................................................
Pesticide Active Ingredient Production ......................................................................
Wool Fiberglass Manufacturing .................................................................................
Manufacture of Amino/Phenolic Resins ....................................................................
Polyether Polyols Production ....................................................................................
Primary Copper Smelting ..........................................................................................
Secondary Aluminum Production ..............................................................................
Primary Lead Smelting ..............................................................................................
Petroleum Refineries: Catalytic Cracking, Catalytic Reforming, and Sulfur Recovery Units.
Publicly Owned Treatment Works .............................................................................
Ferroalloys Production ...............................................................................................
Municipal Solid Waste Landfills .................................................................................
Manufacturing of Nutritional Yeast ............................................................................
Organic Liquids Distribution (non-gasoline) ..............................................................
Miscellaneous Organic Chemical Manufacturing ......................................................
Solvent Extraction for Vegetable Oil Production .......................................................
Wet-Formed Fiberglass Mat Production ...................................................................
Surface Coating of Automobiles and Light-Duty Trucks ...........................................
Paper and Other Web Coating ..................................................................................
Surface Coating of Metal Cans .................................................................................
Miscellaneous Metal Parts and Products ..................................................................
Large Appliances .......................................................................................................
Printing, Coating, and Dyeing of Fabrics and Other Textiles ...................................
Surface Coating of Plastic Parts and Products .........................................................
Wood Building Products ............................................................................................
Surface Coating of Metal Furniture ...........................................................................
Surface Coating of Metal Coil ...................................................................................
Leather Finishing Operations ....................................................................................
Cellulose Products Manufacturing .............................................................................
Boat Manufacturing ...................................................................................................
Reinforced Plastics Composites Production .............................................................
Tire Manufacturing .....................................................................................................
Stationary Combustion Turbines ...............................................................................
Stationary Reciprocating Internal Combustion Engines ............................................
Lime Manufacturing Plants ........................................................................................
Semiconductor Manufacturing ...................................................................................
Coke Oven: Pushing, Quenching and Battery Stacks ..............................................
Iron and Steel Foundries ...........................................................................................
Integrated Iron and Steel ...........................................................................................
Site Remediation .......................................................................................................
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
................
X
X
X
X
X
X
X
X
X
X
................
.................
X
X
X
X
.................
X
X
.................
.................
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
.................
X
X
X
X
X
X
X
X
X
X
X
X
X
X
................
.................
.................
X
.................
.................
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
.................
.................
.................
.................
.................
.................
.................
X
.................
.................
.................
.................
.................
.................
.................
.................
.................
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
................
X
X
X
X
X
................
X
X
X
X
X
X
X
X
X
................
X
X
X
X
X
X
.................
.................
.................
.................
.................
.................
.................
.................
.................
.................
.................
.................
.................
.................
.................
.................
.................
.................
.................
.................
.................
.................
.................
.................
.................
.................
.................
.................
.................
.................
.................
OO ..........
PP ...........
QQ ..........
RR ..........
SS ...........
TT ...........
UU ..........
VV ...........
WW .........
XX ...........
cprice-sewell on PROD1PC66 with RULES
YY ...........
CCC ........
DDD ........
EEE ........
GGG .......
HHH ........
III ............
JJJ ..........
LLL .........
MMM ......
NNN ........
OOO .......
PPP ........
QQQ .......
RRR ........
TTT .........
UUU ........
VVV ........
XXX ........
AAAA ......
CCCC .....
EEEE ......
FFFF .......
GGGG ....
HHHH .....
IIII ...........
JJJJ ........
KKKK ......
MMMM ...
NNNN .....
OOOO ....
PPPP ......
QQQQ ....
RRRR .....
SSSS ......
TTTT .......
UUUU .....
VVVV ......
WWWW ..
XXXX ......
YYYY ......
ZZZZ .......
AAAAA ...
BBBBB ...
CCCCC ..
EEEEE ...
FFFFF ....
GGGGG
VerDate Aug<31>2005
14:51 May 07, 2007
Jkt 211001
PO 00000
Frm 00039
Fmt 4700
Sfmt 4700
E:\FR\FM\08MYR1.SGM
08MYR1
25984
Federal Register / Vol. 72, No. 88 / Tuesday, May 8, 2007 / Rules and Regulations
DELEGATION STATUS FOR PART 63 STANDARDS—ARIZONA—Continued
Subpart
Description
ADEQ 1
MCAQD 2
PDEQ 3
PCAQCD 4
HHHHH ..
IIIII ..........
JJJJJ ......
KKKKK ...
LLLLL .....
MMMMM
NNNNN ..
PPPPP ...
QQQQQ
RRRRR ..
SSSSS ...
TTTTT ....
Miscellaneous Coating Manufacturing ......................................................................
Mercury Emissions from Mercury Cell Chlor-Alkali Plants .......................................
Brick and Structural Clay Products Manufacturing ...................................................
Clay Ceramics Manufacturing ...................................................................................
Asphalt Roofing and Processing ...............................................................................
Flexible Polyurethane Foam Fabrication Operation ..................................................
Hydrochloric Acid Production ....................................................................................
Engine Test Cells/Stands ..........................................................................................
Friction Products Manufacturing ................................................................................
Taconite Iron Ore Processing ...................................................................................
Refractory Products Manufacturing ...........................................................................
Primary Magnesium Refining ....................................................................................
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
.................
.................
.................
.................
.................
.................
.................
.................
.................
.................
.................
.................
1 Arizona
Department of Environmental Quality.
County Air Quality Department.
County Department of Environmental Quality.
4 Pinal County Air Quality Control District.
2 Maricopa
3 Pima
*
*
*
*
*
(28) * * *
(i) The following table lists the
specific part 63 standards that have
been delegated unchanged to the air
pollution control agencies in the State of
Nevada. The (X) symbol is used to
indicate each category that has been
delegated.
DELEGATION STATUS FOR PART 63 STANDARDS—NEVADA
Subpart
Description
NDEP1
WCAQMD2
CCDAQM3
A .............
F .............
G ............
General Provisions ......................................................................................................................
Synthetic Organic Chemical Manufacturing Industry ..................................................................
Synthetic Organic Chemical Manufacturing Industry: Process Vents, Storage Vessels, Transfer Operations, and Wastewater.
Organic Hazardous Air Pollutants: Equipment Leaks .................................................................
Organic Hazardous Air Pollutants: Certain Processes Subject to the Negotiated Regulation
for Equipment Leaks.
Polyvinyl Chloride and Copolymers Production ..........................................................................
Coke Oven Batteries ...................................................................................................................
Perchloroethylene Dry Cleaning ..................................................................................................
Hard and Decorative Chromium Electroplating and Chromium Anodizing Tanks ......................
Ethylene Oxide Sterilization Facilities .........................................................................................
Industrial Process Cooling Towers ..............................................................................................
Gasoline Distribution Facilities ....................................................................................................
Pulp and Paper ...........................................................................................................................
Halogenated Solvent Cleaning ....................................................................................................
Group I Polymers and Resins .....................................................................................................
Epoxy Resins Production and Non-Nylon Polyamides Production .............................................
Secondary Lead Smelting ...........................................................................................................
Marine Tank Vessel Loading Operations ....................................................................................
Phosphoric Acid Manufacturing Plants .......................................................................................
Phosphate Fertilizers Production Plants .....................................................................................
Petroleum Refineries ...................................................................................................................
Off-Site Waste and Recovery Operations ...................................................................................
Magnetic Tape Manufacturing Operations ..................................................................................
Aerospace Manufacturing and Rework Facilities ........................................................................
Oil and Natural Gas Production Facilities ...................................................................................
Shipbuilding and Ship Repair (Surface Coating) ........................................................................
Wood Furniture Manufacturing Operations .................................................................................
Printing and Publishing Industry ..................................................................................................
Primary Aluminum Reduction Plants ...........................................................................................
Chemical Recovery Combustion Sources at Kraft, Soda, Sulfite, and Stand-Alone
Semichemical Pulp Mills.
Tanks—Level 1 ............................................................................................................................
Containers ...................................................................................................................................
Surface Impoundments ...............................................................................................................
Individual Drain Systems .............................................................................................................
Closed Vent Systems, Control Devices, Recovery Devices and Routing to a Fuel Gas System or a Process.
Equipment Leaks—Control Level 1 .............................................................................................
Equipment Leaks—Control Level 2 .............................................................................................
Oil-Water Separators and Organic-Water Separators ................................................................
Storage Vessels (Tanks)—Control Level 2 .................................................................................
Ethylene Manufacturing Process Units: Heat Exchange Systems and Waste Operations ........
X
X
X
X
..................
..................
.................
.................
X
X
..................
..................
.................
.................
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
..................
..................
X
X
X
..................
X
..................
X
..................
..................
..................
..................
..................
..................
..................
..................
..................
..................
..................
..................
..................
X
..................
..................
.................
.................
.................
.................
.................
.................
.................
.................
.................
.................
.................
.................
.................
.................
.................
.................
.................
.................
.................
.................
.................
.................
.................
.................
.................
X
X
X
X
X
..................
..................
..................
..................
..................
.................
.................
.................
.................
.................
X
X
X
X
X
..................
..................
..................
..................
..................
.................
.................
.................
.................
.................
H ............
I ..............
cprice-sewell on PROD1PC66 with RULES
J .............
L .............
M ............
N ............
O ............
Q ............
R ............
S .............
T .............
U ............
W ............
X .............
Y .............
AA ..........
BB ..........
CC ..........
DD ..........
EE ..........
GG .........
HH ..........
II .............
JJ ...........
KK ..........
LL ...........
MM .........
OO
PP
QQ
RR
SS
.........
..........
.........
..........
..........
TT ...........
UU ..........
VV ..........
WW ........
XX ..........
VerDate Aug<31>2005
14:51 May 07, 2007
Jkt 211001
PO 00000
Frm 00040
Fmt 4700
Sfmt 4700
E:\FR\FM\08MYR1.SGM
08MYR1
Federal Register / Vol. 72, No. 88 / Tuesday, May 8, 2007 / Rules and Regulations
25985
DELEGATION STATUS FOR PART 63 STANDARDS—NEVADA—Continued
Subpart
Description
NDEP1
WCAQMD2
CCDAQM3
YY ..........
CCC .......
DDD .......
EEE ........
GGG .......
HHH .......
III ............
JJJ ..........
LLL .........
MMM ......
NNN .......
OOO .......
PPP ........
QQQ .......
RRR .......
TTT ........
UUU .......
VVV ........
XXX ........
AAAA .....
CCCC .....
DDDD .....
EEEE .....
FFFF ......
GGGG ....
HHHH .....
JJJJ ........
KKKK .....
MMMM ...
NNNN .....
OOOO ....
QQQQ ....
RRRR .....
SSSS .....
TTTT ......
UUUU .....
VVVV .....
WWWW
XXXX .....
YYYY .....
ZZZZ ......
AAAAA ...
BBBBB ...
CCCCC ..
DDDDD ..
EEEEE ...
FFFFF ....
JJJJJ ......
KKKKK ...
LLLLL .....
MMMMM
NNNNN ..
PPPPP ...
QQQQQ
SSSSS ...
Generic MACT Standards ...........................................................................................................
Steel Pickling ...............................................................................................................................
Mineral Wool Production .............................................................................................................
Hazardous Waste Combustors ...................................................................................................
Pharmaceuticals Production ........................................................................................................
Natural Gas Transmission and Storage Facilities .......................................................................
Flexible Polyurethane Foam Production .....................................................................................
Group IV Polymers and Resins ...................................................................................................
Portland Cement Manufacturing Industry ....................................................................................
Pesticide Active Ingredient Production ........................................................................................
Wool Fiberglass Manufacturing ...................................................................................................
Manufacture of Amino/Phenolic Resins ......................................................................................
Polyether Polyols Production ......................................................................................................
Primary Copper Smelting ............................................................................................................
Secondary Aluminum Production ................................................................................................
Primary Lead Smelting ................................................................................................................
Petroleum Refineries: Catalytic Cracking, Catalytic Reforming, and Sulfur Recovery Units .....
Publicly Owned Treatment Works ...............................................................................................
Ferroalloys Production .................................................................................................................
Municipal Solid Waste Landfills ...................................................................................................
Manufacturing of Nutritional Yeast ..............................................................................................
Plywood and Composite Wood Products ....................................................................................
Organic Liquids Distribution (non-gasoline) ................................................................................
Miscellaneous Organic Chemical Manufacturing ........................................................................
Solvent Extraction for Vegetable Oil Production .........................................................................
Wet-Formed Fiberglass Mat Production .....................................................................................
Paper and Other Web Coating ....................................................................................................
Surface Coating of Metal Cans ...................................................................................................
Miscellaneous Metal Parts and Products ....................................................................................
Large Appliances .........................................................................................................................
Printing, Coating, and Dyeing of Fabrics and Other Textiles .....................................................
Wood Building Products ..............................................................................................................
Surface Coating of Metal Furniture .............................................................................................
Surface Coating of Metal Coil .....................................................................................................
Leather Finishing Operations ......................................................................................................
Cellulose Products Manufacturing ...............................................................................................
Boat Manufacturing .....................................................................................................................
Reinforced Plastics Composites Production ...............................................................................
Tire Manufacturing .......................................................................................................................
Stationary Combustion Turbines .................................................................................................
Stationary Reciprocating Internal Combustion Engines ..............................................................
Lime Manufacturing Plants ..........................................................................................................
Semiconductor Manufacturing .....................................................................................................
Coke Oven: Pushing, Quenching and Battery Stacks ................................................................
Industrial, Commercial, and Institutional Boiler and Process Heaters ........................................
Iron and Steel Foundries .............................................................................................................
Integrated Iron and Steel .............................................................................................................
Brick and Structural Clay Products Manufacturing .....................................................................
Clay Ceramics Manufacturing .....................................................................................................
Asphalt Roofing and Processing .................................................................................................
Flexible Polyurethane Foam Fabrication Operation ....................................................................
Hydrochloric Acid Production ......................................................................................................
Engine Test Cells/Stands ............................................................................................................
Friction Products Manufacturing ..................................................................................................
Refractory Products Manufacturing .............................................................................................
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
..................
..................
..................
..................
..................
..................
..................
..................
..................
..................
..................
..................
..................
..................
..................
..................
..................
..................
..................
..................
..................
..................
..................
..................
..................
..................
..................
..................
..................
..................
..................
..................
..................
..................
..................
..................
..................
..................
..................
..................
..................
..................
..................
..................
..................
..................
..................
..................
..................
..................
..................
..................
..................
..................
..................
.................
.................
.................
.................
.................
.................
.................
.................
.................
.................
.................
.................
.................
.................
.................
.................
.................
.................
.................
.................
.................
.................
.................
.................
.................
.................
.................
.................
.................
.................
.................
.................
.................
.................
.................
.................
.................
.................
.................
.................
.................
.................
.................
.................
.................
.................
.................
.................
.................
.................
.................
.................
.................
.................
.................
1 Nevada
Division of Environmental Protection.
County Air Quality Management Division.
County Department of Air Quality Management.
2 Washoe
3 Clark
*
*
*
*
*
[FR Doc. E7–8686 Filed 5–7–07; 8:45 am]
cprice-sewell on PROD1PC66 with RULES
BILLING CODE 6560–50–P
VerDate Aug<31>2005
14:51 May 07, 2007
Jkt 211001
PO 00000
Frm 00041
Fmt 4700
Sfmt 4700
E:\FR\FM\08MYR1.SGM
08MYR1
]]>Agencies
[Federal Register Volume 72, Number 88 (Tuesday, May 8, 2007)]
[Rules and Regulations]
[Pages 25980-25985]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: E7-8686]
-----------------------------------------------------------------------
ENVIRONMENTAL PROTECTION AGENCY
40 CFR Part 63
[EPA-R09-OAR-2007-0322; FRL-8309-7]
Delegation of National Emission Standards for Hazardous Air
Pollutants for Source Categories; State of Arizona, Arizona Department
of Environmental Quality; State of Nevada, Nevada Division of
Environmental Protection
AGENCY: Environmental Protection Agency (EPA).
ACTION: Direct final rule.
-----------------------------------------------------------------------
SUMMARY: EPA is amending certain regulations to reflect the current
delegation status of national emission standards for hazardous air
pollutants (NESHAP) in Arizona and Nevada. Several NESHAP were
delegated to the Arizona Department of Environmental Quality on March
16, 2007, and to the Nevada Division of Environmental Protection on
January 12, 2007. The purpose of this action is to update the listing
in the Code of Federal Regulations.
DATES: This rule is effective on July 9, 2007 without further notice,
unless EPA receives adverse comments by June 7, 2007. If we receive
such comments, we will publish a timely withdrawal in the Federal
Register to notify the public that this direct final rule will not take
effect.
ADDRESSES: Submit comments, identified by docket number EPA-R09-OAR-
2007-0322, by one of the following methods:
1. Federal eRulemaking Portal: www.regulations.gov. Follow the on-
line instructions.
2. E-mail: steckel.andrew@epa.gov.
3. Mail or delivery: Andrew Steckel (Air-4), U.S. Environmental
Protection Agency Region IX, 75 Hawthorne Street, San Francisco, CA
94105-3901.
Instructions: All comments will be included in the public docket
without change and may be made available online at www.regulations.gov,
including any personal information provided, unless the comment
includes Confidential Business Information (CBI) or other information
whose disclosure is restricted by statute. Information that you
consider CBI or otherwise protected should be clearly identified as
such and should not be submitted through www.regulations.gov or e-mail.
www.regulations.gov is an ``anonymous access'' system, and EPA will not
know your identity or contact information unless you provide it in the
body of your comment. If you send e-mail directly to EPA, your e-mail
address will be automatically captured and included as part of the
public comment. If EPA cannot read your comment due to technical
difficulties and cannot contact you for clarification, EPA may not be
able to consider your comment.
Docket: The index to the docket for this action is available
electronically at www.regulations.gov and in hard copy at EPA Region
IX, 75 Hawthorne Street, San Francisco, California. While all documents
in the docket are listed in the index, some information may be publicly
available only at the hard copy location (e.g., copyrighted material),
and some may not be publicly available in either location (e.g., CBI).
To inspect the hard copy materials, please schedule an appointment
during normal business hours with the contact listed in the FOR FURTHER
INFORMATION CONTACT section.
FOR FURTHER INFORMATION CONTACT: Mae Wang, EPA Region IX, (415) 947-
4124, wang.mae@epa.gov.
SUPPLEMENTARY INFORMATION: Throughout this document, ``we,'' ``us'' and
``our'' refer to EPA.
Table of Contents
I. Background
A. Delegation of NESHAP
B. ADEQ Delegations
C. NDEP delegations
II. EPA Action
III. Statutory and Executive Order Reviews
I. Background
A. Delegation of NESHAP
Section 112(l) of the Clean Air Act, as amended in 1990 (CAA),
authorizes EPA to delegate to state or local air pollution control
agencies the authority to implement and enforce the standards set out
in the Code of Federal Regulations, Title 40 (40 CFR), Part 63,
National Emission Standards for Hazardous Air Pollutants for Source
Categories. On November 26, 1993, EPA promulgated regulations, codified
at 40 CFR Part 63, Subpart E (hereinafter referred to as ``Subpart
E''), establishing procedures for EPA's approval of state rules or
programs under section 112(l) (see 58 FR 62262). Subpart E was later
amended on September 14, 2000 (see 65 FR 55810).
Any request for approval under CAA section 112(l) must meet the
approval criteria in 112(l)(5) and Subpart E. To streamline the
approval process for future applications, a State or local agency may
submit a one-time demonstration that it has adequate authorities and
resources to implement and enforce any CAA section 112 standards. If
such demonstration is approved, then the state or local agency would no
longer need to resubmit a demonstration of these same authorities and
resources for every subsequent request for delegation of CAA section
112 standards. However, EPA maintains the authority to withdraw its
approval if the State does not adequately implement or enforce an
approved rule or program.
B. ADEQ Delegations
On July 17, 1998, EPA published a direct final action delegating to
the Arizona Department of Environmental Quality (ADEQ) several NESHAP
and approving ADEQ's delegation mechanism for future standards (see 63
FR 38478). That action explained the procedure for EPA to grant future
delegations to ADEQ by letter, with periodic Federal Register listings
of standards that have been delegated. On February 21, 2007, ADEQ
requested delegation of the following NESHAP contained in 40 CFR Part
63:
[[Page 25981]]
Subpart J--NESHAP for Polyvinyl Chloride and Copolymers
Production
Subpart MM--NESHAP for Chemical Recovery Combustion
Sources at Kraft, Soda, Sulfite, and Stand-Alone Semichemical Pulp
Mills
Subpart XX--National Emission Standards for Ethylene
Manufacturing Process Units: Heat Exchange Systems and Waste
Operations
Subpart OOO--National Emission Standards for Hazardous
Air Pollutant Emissions: Manufacture of Amino/Phenolic Resins
Subpart QQQ--National Emission Standards for Primary
Copper Smelting
Subpart RRR--National Emission Standards for Secondary
Aluminum Production
Subpart UUU--National Emission Standards for Petroleum
Refineries: Catalytic Cracking, Catalytic Reforming, and Sulfur Plan
Units
Subpart VVV--NESHAP: Publicly Owned Treatment Works
Subpart AAAA--National Emission Standards for Municipal
Solid Waste Landfills
Subpart CCCC--National Emission Standards for
Manufacturing of Nutritional Yeast
Subpart EEEE--National Emission Standards for Organic
Liquids Distribution (Non-Gasoline)
Subpart FFFF--NESHAP: Miscellaneous Organic Chemical
Manufacturing
Subpart GGGG--National Emission Standards for Solvent
Extraction for Vegetable Oil Production
Subpart HHHH--National Emission Standards for Wet-
Formed Fiberglass Mat Production
Subpart IIII--NESHAP: Surface Coating of Automobiles
and Light-Duty Trucks
Subpart JJJJ--NESHAP: Paper and Other Web Coating
Subpart KKKK--NESHAP: Surface Coating of Metal Cans
Subpart MMMM--NESHAP for Surface Coating of
Miscellaneous Metal Parts and Products
Subpart NNNN--National Emission Standards for Large
Appliances
Subpart OOOO--NESHAP: Printing, Coating, and Dyeing of
Fabrics and Other Textiles
Subpart PPPP--NESHAP for Surface Coating of Plastic
Parts and Products
Subpart QQQQ--National Emission Standards for Wood
Building Products
Subpart RRRR--National Emission Standards for Surface
Coating of Metal Furniture
Subpart SSSS--National Emission Standards for Surface
Coating of Metal Coil
Subpart TTTT--National Emission Standards for Leather
Finishing Operations
Subpart UUUU--National Emission Standards for Cellulose
Products Manufacturing
Subpart VVVV--National Emission Standards for Boat
Manufacturing
Subpart WWWW--National Emission Standards for
Reinforced Plastics Composites Production
Subpart XXXX--National Emission Standards for Tire
Manufacturing
Subpart YYYY--NESHAP for Stationary Combustion Turbines
Subpart ZZZZ--NESHAP for Stationary Reciprocating
Internal Combustion Engines
Subpart AAAAA--NESHAP for Lime Manufacturing Plants
Subpart BBBBB--National Emission Standards for
Semiconductor Manufacturing
Subpart CCCCC--National Emission Standards for Coke
Ovens: Pushing, Quenching, and Battery Stacks
Subpart EEEEE--NESHAP for Iron and Steel Foundries
Subpart FFFFF--National Emission Standards for
Integrated Iron and Steel
Subpart GGGGG--NESHAP: Site Remediation
Subpart HHHHH--NESHAP: Miscellaneous Coating
Manufacturing
Subpart IIIII--NESHAP: Mercury Emissions from Mercury
Cell Chlor-Alkali Plants
Subpart JJJJJ--National Emission Standards for Brick
and Structural Clay Products Manufacturing
Subpart KKKKK--NESHAP for Clay Ceramics Manufacturing
Subpart LLLLL--National Emission Standards for Asphalt
Roofing and Processing
Subpart MMMMM--National Emission Standards for Flexible
Polyurethane Foam Fabrication Operations
Subpart NNNNN--NESHAP: Hydrochloric Acid Production
Subpart PPPPP--National Emission Standards for Engine
Test Cells/Stands
Subpart QQQQQ--National Emission Standards for Friction
Products Manufacturing
Subpart RRRRR--NESHAP: Taconite Iron Ore Processing
Subpart SSSSS--National Emission Standards for
Refractory Products Manufacturing
Subpart TTTTT--NESHAP for Primary Magnesium Refining
On March 16, 2007, EPA granted delegation to ADEQ for these NESHAP,
along with any amendments to previously-ndash;delegated NESHAP, as of
July 1, 2004. Today's action is serving to notify the public of the
March 16, 2007, delegation and to codify these delegations into the
Code of Federal Regulations.
ADEQ also included a request for delegation of the federal List of
Hazardous Air Pollutants, Petitions Process, Lesser Quantity
Designations, Source Category List codified at 40 CFR Part 63, Subpart
C. This Subpart does not need to be delegated under the Clean Air Act
section 112(l) approval process. EPA does not delegate to state or
local agencies the authority to make changes to this federal list of
pollutants, and Subpart C does not contain any provisions or
authorities requiring implementation by state or local agencies. As a
result, EPA is not taking action to delegate 40 CFR Part 63, Subpart C
or its amendments to ADEQ.
C. NDEP Delegations
On May 27, 1998, EPA published a direct final action delegating to
the Nevada Division of Environmental Protection (NDEP) several NESHAP
and approving NDEP's delegation mechanism for future standards (see 63
FR 28906). That action explained the procedure for EPA to grant
delegations to NDEP by letter, with periodic Federal Register listings
of standards that have been delegated. On October 26, 2006, NDEP
requested delegation of the NESHAP for Plywood and Composite Wood
Products, 40 CFR part 63, subpart DDDD.
On January 12, 2007, EPA granted delegation to NDEP for this
NESHAP, along with any amendments to previously-ndash;delegated NESHAP,
as of July 1, 2006. Today's action is serving to notify the public of
the January 12, 2007, delegations and to codify these delegations into
the Code of Federal Regulations.
NDEP also included a request for delegation of the Federal list of
hazardous air pollutants, codified at 40 CFR part 63, subpart C. There
are no authorities to delegate in this Subpart, and EPA does not
delegate to States the ability to make modifications to the list. As a
result, EPA is not taking action to delegate 40 CFR part 63, subpart C
or its amendments to NDEP.
II. EPA Action
Today's document serves to notify the public of the delegation of
NESHAP to ADEQ on March 16, 2007, and to NDEP on January 12, 2007.
Today's action will codify these delegations into the Code of Federal
Regulations.
III. Statutory and Executive Order Reviews
Under Executive Order 12866 (58 FR 51735, October 4, 1993), this
action is not a ``significant regulatory action'' and therefore is not
subject to review by the Office of Management and Budget. For this
reason, this action is also not subject to Executive Order 13211,
``Actions Concerning Regulations That Significantly Affect Energy
Supply, Distribution, or Use'' (66 FR 28355, May 22, 2001). This action
merely updates the list of approved delegations in the Code of Federal
Regulations and imposes no additional requirements. Accordingly, the
Administrator certifies that this rule will not have a significant
economic impact on a substantial number of small entities under the
Regulatory Flexibility Act (5 U.S.C. 601 et seq.). Because this rule
does not impose any additional enforceable duty beyond that required by
state law, it
[[Page 25982]]
does not contain any unfunded mandate or significantly or uniquely
affect small governments, as described in the Unfunded Mandates Reform
Act of 1995 (Pub. L. 104-4).
This rule also does not have tribal implications because it will
not have a substantial direct effect on one or more Indian tribes, on
the relationship between the Federal Government and Indian tribes, or
on the distribution of power and responsibilities between the Federal
Government and Indian tribes, as specified by Executive Order 13175 (65
FR 67249, November 9, 2000). This action also does not have Federalism
implications because it does not have substantial direct effects on the
States, on the relationship between the national government and the
States, or on the distribution of power and responsibilities among the
various levels of government, as specified in Executive Order 13132 (64
FR 43255, August 10, 1999). This action merely updates the list of
already-ndash;approved delegations, and does not alter the relationship
or the distribution of power and responsibilities established in the
CAA. This rule also is not subject to Executive Order 13045
``Protection of Children from Environmental Health Risks and Safety
Risks'' (62 FR 19885, April 23, 1997), because it approves a state rule
implementing a Federal standard.
In reviewing State delegation submissions, our role is to approve
State choices, provided that they meet the criteria of the CAA. In this
context, in the absence of a prior existing requirement for the State
to use voluntary consensus standards (VCS), EPA has no authority to
disapprove State submissions for failure to use VCS. It would thus be
inconsistent with applicable law for EPA, when it reviews a State
submission, to use VCS in place of a State submission that otherwise
satisfies the provisions of the CAA. Thus, the requirements of section
12(d) of the National Technology Transfer and Advancement Act of 1995
(15 U.S.C. 272 note) do not apply. This rule does not impose an
information collection burden under the provisions of the Paperwork
Reduction Act of 1995 (44 U.S.C. 3501 et seq.).
The Congressional Review Act, 5 U.S.C. section 801 et seq., as
added by the Small Business Regulatory Enforcement Fairness Act of
1996, generally provides that before a rule may take effect, the agency
promulgating the rule must submit a rule report, which includes a copy
of the rule, to each House of the Congress and to the Comptroller
General of the United States. EPA will submit a report containing this
rule and other required information to the U.S. Senate, the U.S. House
of Representatives, and the Comptroller General of the United States
prior to publication of the rule in the Federal Register. A major rule
cannot take effect until 60 days after it is published in the Federal
Register. This action is not a ``major rule'' as defined by 5 U.S.C.
804(2).
Under section 307(b)(1) of the Clean Air Act, petitions for
judicial review of this action must be filed in the United States Court
of Appeals for the appropriate circuit by July 9, 2007. Filing a
petition for reconsideration by the Administrator of this final rule
does not affect the finality of this rule for the purposes of judicial
review nor does it extend the time within which a petition for judicial
review may be filed, and shall not postpone the effectiveness of such
rule or action. This action may not be challenged later in proceedings
to enforce its requirements (see section 307(b)(2)).
List of Subjects in 40 CFR Part 63
Environmental protection, Administrative practice and procedure,
Air pollution control, Hazardous substances, Intergovernmental
relations, Reporting and recordkeeping requirements.
Authority: This action is issued under the authority of Section
112 of the Clean Air Act, as amended, 42 U.S.C. 412.
Date Signed: April 19, 2007.
Deborah Jordan,
Director, Air Division, Region IX.
0
Title 40, chapter I, part 63 of the Code of Federal Regulations is
amended as follows:
PART 63--[AMENDED]
0
1. The authority citation for Part 63 continues to read as follows:
Authority: 42 U.S.C. 7401 et seq.
Subpart E--Approval of State Programs and Delegation of Federal
Authorities
0
2. Section 63.99 is amended by revising paragraphs (a)(3) and
(a)(28)(i) to read as follows:
Sec. 63.99 Delegated Federal authorities.
(a) * * *
(3) The following table lists the specific part 63 standards that
have been delegated unchanged to the air pollution control agencies in
the State of Arizona. The (X) symbol is used to indicate each category
that has been delegated.
Delegation Status for Part 63 Standards--Arizona
----------------------------------------------------------------------------------------------------------------
Subpart Description ADEQ \1\ MCAQD \2\ PDEQ \3\ PCAQCD \4\
----------------------------------------------------------------------------------------------------------------
A.......................... General Provisions................. X X X X
F.......................... Synthetic Organic Chemical X X X X
Manufacturing Industry.
G.......................... Synthetic Organic Chemical X X X X
Manufacturing Industry: Process
Vents, Storage Vessels, Transfer
Operations, and Wastewater.
H.......................... Organic Hazardous Air Pollutants: X X X X
Equipment Leaks.
I.......................... Organic Hazardous Air Pollutants: X X X X
Certain Processes Subject to the
Negotiated Regulation for
Equipment Leaks.
J.......................... Polyvinyl Chloride and Copolymers X X .......... ..........
Production.
L.......................... Coke Oven Batteries................ X X X X
M.......................... Perchloroethylene Dry Cleaning..... X X X X
N.......................... Hard and Decorative Chromium X X X X
Electroplating and Chromium
Anodizing Tanks.
O.......................... Ethylene Oxide Sterilization X X X X
Facilities.
Q.......................... Industrial Process Cooling Towers.. X X X X
R.......................... Gasoline Distribution Facilities... X X X X
S.......................... Pulp and Paper..................... X X X ..........
T.......................... Halogenated Solvent Cleaning....... X X X X
U.......................... Group I Polymers and Resins........ X X X X
W.......................... Epoxy Resins Production and Non- X X X X
Nylon Polyamides Production.
X.......................... Secondary Lead Smelting............ X X X X
AA......................... Phosphoric Acid Manufacturing X X X ..........
Plants.
[[Page 25983]]
BB......................... Phosphate Fertilizers Production X X X ..........
Plants.
CC......................... Petroleum Refineries............... X X X X
DD......................... Off-Site Waste and Recovery X X X X
Operations.
EE......................... Magnetic Tape Manufacturing X X X X
Operations.
GG......................... Aerospace Manufacturing and Rework X X X X
Facilities.
HH......................... Oil and Natural Gas Production X X X ..........
Facilities.
JJ......................... Wood Furniture Manufacturing X X X X
Operations.
KK......................... Printing and Publishing Industry... X X X X
LL......................... Primary Aluminum Reduction Plants.. X .......... X ..........
MM......................... Chemical Recovery Combustion X X .......... ..........
Sources at Kraft, Soda, Sulfite,
and Stand-Alone Semichemical Pulp
Mills.
OO......................... Tanks--Level 1..................... X X X X
PP......................... Containers......................... X X X X
QQ......................... Surface Impoundments............... X X X X
RR......................... Individual Drain Systems........... X X X X
SS......................... Closed Vent Systems, Control X X X ..........
Devices, Recovery Devices and
Routing to a Fuel Gas System or a
Process.
TT......................... Equipment Leaks--Control Level 1... X X X ..........
UU......................... Equipment Leaks--Control Level 2... X X X ..........
VV......................... Oil-Water Separators and Organic- X X X X
Water Separators.
WW......................... Storage Vessels (Tanks)--Control X X X ..........
Level 2.
XX......................... Ethylene Manufacturing Process X X .......... ..........
Units: Heat Exchange Systems and
Waste Operations.
YY......................... Generic MACT Standards............. X X X ..........
CCC........................ Steel Pickling..................... X X X ..........
DDD........................ Mineral Wool Production............ X X X ..........
EEE........................ Hazardous Waste Combustors......... X X X ..........
GGG........................ Pharmaceuticals Production......... X X X ..........
HHH........................ Natural Gas Transmission and X X X ..........
Storage Facilities.
III........................ Flexible Polyurethane Foam X X X ..........
Production.
JJJ........................ Group IV Polymers and Resins....... X X X X
LLL........................ Portland Cement Manufacturing X X X ..........
Industry.
MMM........................ Pesticide Active Ingredient X X X ..........
Production.
NNN........................ Wool Fiberglass Manufacturing...... X X X ..........
OOO........................ Manufacture of Amino/Phenolic X X X ..........
Resins.
PPP........................ Polyether Polyols Production....... X X X ..........
QQQ........................ Primary Copper Smelting............ X X X ..........
RRR........................ Secondary Aluminum Production...... X X X ..........
TTT........................ Primary Lead Smelting.............. X X X ..........
UUU........................ Petroleum Refineries: Catalytic X X X ..........
Cracking, Catalytic Reforming, and
Sulfur Recovery Units.
VVV........................ Publicly Owned Treatment Works..... X X X ..........
XXX........................ Ferroalloys Production............ X X X ..........
AAAA....................... Municipal Solid Waste Landfills.... X X X ..........
CCCC....................... Manufacturing of Nutritional Yeast. X X X ..........
EEEE....................... Organic Liquids Distribution (non- X X X ..........
gasoline).
FFFF....................... Miscellaneous Organic Chemical X X X ..........
Manufacturing.
GGGG....................... Solvent Extraction for Vegetable X X X ..........
Oil Production.
HHHH....................... Wet-Formed Fiberglass Mat X X X ..........
Production.
IIII....................... Surface Coating of Automobiles and X X .......... ..........
Light-Duty Trucks.
JJJJ....................... Paper and Other Web Coating........ X X X ..........
KKKK....................... Surface Coating of Metal Cans...... X X X ..........
MMMM....................... Miscellaneous Metal Parts and X X X ..........
Products.
NNNN....................... Large Appliances................... X X X ..........
OOOO....................... Printing, Coating, and Dyeing of X X X ..........
Fabrics and Other Textiles.
PPPP....................... Surface Coating of Plastic Parts X X .......... ..........
and Products.
QQQQ....................... Wood Building Products............. X X X ..........
RRRR....................... Surface Coating of Metal Furniture. X X X ..........
SSSS....................... Surface Coating of Metal Coil...... X X X ..........
TTTT....................... Leather Finishing Operations....... X X X ..........
UUUU....................... Cellulose Products Manufacturing... X X X ..........
VVVV....................... Boat Manufacturing................. X X X ..........
WWWW....................... Reinforced Plastics Composites X X X ..........
Production.
XXXX....................... Tire Manufacturing................. X X X ..........
YYYY....................... Stationary Combustion Turbines..... X X X ..........
ZZZZ....................... Stationary Reciprocating Internal X X .......... ..........
Combustion Engines.
AAAAA...................... Lime Manufacturing Plants.......... X X X ..........
BBBBB...................... Semiconductor Manufacturing........ X X X ..........
CCCCC...................... Coke Oven: Pushing, Quenching and X X X ..........
Battery Stacks.
EEEEE...................... Iron and Steel Foundries........... X X X ..........
FFFFF...................... Integrated Iron and Steel.......... X X X ..........
GGGGG...................... Site Remediation................... X X X ..........
[[Page 25984]]
HHHHH...................... Miscellaneous Coating Manufacturing X X X ..........
IIIII...................... Mercury Emissions from Mercury Cell X X X ..........
Chlor-Alkali Plants.
JJJJJ...................... Brick and Structural Clay Products X X X ..........
Manufacturing.
KKKKK...................... Clay Ceramics Manufacturing........ X X X ..........
LLLLL...................... Asphalt Roofing and Processing..... X X X ..........
MMMMM...................... Flexible Polyurethane Foam X X X ..........
Fabrication Operation.
NNNNN...................... Hydrochloric Acid Production....... X X X ..........
PPPPP...................... Engine Test Cells/Stands........... X X X ..........
QQQQQ...................... Friction Products Manufacturing.... X X X ..........
RRRRR...................... Taconite Iron Ore Processing....... X X X ..........
SSSSS...................... Refractory Products Manufacturing.. X X X ..........
TTTTT...................... Primary Magnesium Refining......... X X X ..........
----------------------------------------------------------------------------------------------------------------
\1\ Arizona Department of Environmental Quality.
\2\ Maricopa County Air Quality Department.
\3\ Pima County Department of Environmental Quality.
\4\ Pinal County Air Quality Control District.
* * * * *
(28) * * *
(i) The following table lists the specific part 63 standards that
have been delegated unchanged to the air pollution control agencies in
the State of Nevada. The (X) symbol is used to indicate each category
that has been delegated.
Delegation Status for Part 63 Standards--Nevada
------------------------------------------------------------------------
Subpart Description NDEP\1\ WCAQMD\2\ CCDAQM\3\
------------------------------------------------------------------------
A............ General Provisions... X X
F............ Synthetic Organic X .......... ..........
Chemical
Manufacturing
Industry.
G............ Synthetic Organic X .......... ..........
Chemical
Manufacturing
Industry: Process
Vents, Storage
Vessels, Transfer
Operations, and
Wastewater.
H............ Organic Hazardous Air X .......... ..........
Pollutants:
Equipment Leaks.
I............ Organic Hazardous Air X .......... ..........
Pollutants: Certain
Processes Subject to
the Negotiated
Regulation for
Equipment Leaks.
J............ Polyvinyl Chloride X .......... ..........
and Copolymers
Production.
L............ Coke Oven Batteries.. X .......... ..........
M............ Perchloroethylene Dry X X ..........
Cleaning.
N............ Hard and Decorative X X ..........
Chromium
Electroplating and
Chromium Anodizing
Tanks.
O............ Ethylene Oxide X X ..........
Sterilization
Facilities.
Q............ Industrial Process X .......... ..........
Cooling Towers.
R............ Gasoline Distribution X X ..........
Facilities.
S............ Pulp and Paper....... X .......... ..........
T............ Halogenated Solvent X X ..........
Cleaning.
U............ Group I Polymers and X .......... ..........
Resins.
W............ Epoxy Resins X .......... ..........
Production and Non-
Nylon Polyamides
Production.
X............ Secondary Lead X .......... ..........
Smelting.
Y............ Marine Tank Vessel X .......... ..........
Loading Operations.
AA........... Phosphoric Acid X .......... ..........
Manufacturing Plants.
BB........... Phosphate Fertilizers X .......... ..........
Production Plants.
CC........... Petroleum Refineries. X .......... ..........
DD........... Off-Site Waste and X .......... ..........
Recovery Operations.
EE........... Magnetic Tape X .......... ..........
Manufacturing
Operations.
GG........... Aerospace X .......... ..........
Manufacturing and
Rework Facilities.
HH........... Oil and Natural Gas X .......... ..........
Production
Facilities.
II........... Shipbuilding and Ship X .......... ..........
Repair (Surface
Coating).
JJ........... Wood Furniture X .......... ..........
Manufacturing
Operations.
KK........... Printing and X X ..........
Publishing Industry.
LL........... Primary Aluminum X .......... ..........
Reduction Plants.
MM........... Chemical Recovery X .......... ..........
Combustion Sources
at Kraft, Soda,
Sulfite, and Stand-
Alone Semichemical
Pulp Mills.
OO........... Tanks--Level 1....... X .......... ..........
PP........... Containers........... X .......... ..........
QQ........... Surface Impoundments. X .......... ..........
RR........... Individual Drain X .......... ..........
Systems.
SS........... Closed Vent Systems, X .......... ..........
Control Devices,
Recovery Devices and
Routing to a Fuel
Gas System or a
Process.
TT........... Equipment Leaks-- X .......... ..........
Control Level 1.
UU........... Equipment Leaks-- X .......... ..........
Control Level 2.
VV........... Oil-Water Separators X .......... ..........
and Organic-Water
Separators.
WW........... Storage Vessels X .......... ..........
(Tanks)--Control
Level 2.
XX........... Ethylene X .......... ..........
Manufacturing
Process Units: Heat
Exchange Systems and
Waste Operations.
[[Page 25985]]
YY........... Generic MACT X .......... ..........
Standards.
CCC.......... Steel Pickling....... X .......... ..........
DDD.......... Mineral Wool X .......... ..........
Production.
EEE.......... Hazardous Waste X .......... ..........
Combustors.
GGG.......... Pharmaceuticals X .......... ..........
Production.
HHH.......... Natural Gas X .......... ..........
Transmission and
Storage Facilities.
III.......... Flexible Polyurethane X .......... ..........
Foam Production.
JJJ.......... Group IV Polymers and X .......... ..........
Resins.
LLL.......... Portland Cement X .......... ..........
Manufacturing
Industry.
MMM.......... Pesticide Active X .......... ..........
Ingredient
Production.
NNN.......... Wool Fiberglass X .......... ..........
Manufacturing.
OOO.......... Manufacture of Amino/ X .......... ..........
Phenolic Resins.
PPP.......... Polyether Polyols X .......... ..........
Production.
QQQ.......... Primary Copper X .......... ..........
Smelting.
RRR.......... Secondary Aluminum X .......... ..........
Production.
TTT.......... Primary Lead Smelting X .......... ..........
UUU.......... Petroleum Refineries: X .......... ..........
Catalytic Cracking,
Catalytic Reforming,
and Sulfur Recovery
Units.
VVV.......... Publicly Owned X .......... ..........
Treatment Works.
XXX.......... Ferroalloys X .......... ..........
Production.
AAAA......... Municipal Solid Waste X .......... ..........
Landfills.
CCCC......... Manufacturing of X .......... ..........
Nutritional Yeast.
DDDD......... Plywood and Composite X .......... ..........
Wood Products.
EEEE......... Organic Liquids X .......... ..........
Distribution (non-
gasoline).
FFFF......... Miscellaneous Organic X .......... ..........
Chemical
Manufacturing.
GGGG......... Solvent Extraction X .......... ..........
for Vegetable Oil
Production.
HHHH......... Wet-Formed Fiberglass X .......... ..........
Mat Production.
JJJJ......... Paper and Other Web X .......... ..........
Coating.
KKKK......... Surface Coating of X .......... ..........
Metal Cans.
MMMM......... Miscellaneous Metal X .......... ..........
Parts and Products.
NNNN......... Large Appliances..... X .......... ..........
OOOO......... Printing, Coating, X .......... ..........
and Dyeing of
Fabrics and Other
Textiles.
QQQQ......... Wood Building X .......... ..........
Products.
RRRR......... Surface Coating of X .......... ..........
Metal Furniture.
SSSS......... Surface Coating of X .......... ..........
Metal Coil.
TTTT......... Leather Finishing X .......... ..........
Operations.
UUUU......... Cellulose Products X .......... ..........
Manufacturing.
VVVV......... Boat Manufacturing... X .......... ..........
WWWW......... Reinforced Plastics X .......... ..........
Composites
Production.
XXXX......... Tire Manufacturing... X .......... ..........
YYYY......... Stationary Combustion X .......... ..........
Turbines.
ZZZZ......... Stationary X .......... ..........
Reciprocating
Internal Combustion
Engines.
AAAAA........ Lime Manufacturing X .......... ..........
Plants.
BBBBB........ Semiconductor X .......... ..........
Manufacturing.
CCCCC........ Coke Oven: Pushing, X .......... ..........
Quenching and
Battery Stacks.
DDDDD........ Industrial, X .......... ..........
Commercial, and
Institutional Boiler
and Process Heaters.
EEEEE........ Iron and Steel X .......... ..........
Foundries.
FFFFF........ Integrated Iron and X .......... ..........
Steel.
JJJJJ........ Brick and Structural X .......... ..........
Clay Products
Manufacturing.
KKKKK........ Clay Ceramics X .......... ..........
Manufacturing.
LLLLL........ Asphalt Roofing and X .......... ..........
Processing.
MMMMM........ Flexible Polyurethane X .......... ..........
Foam Fabrication
Operation.
NNNNN........ Hydrochloric Acid X .......... ..........
Production.
PPPPP........ Engine Test Cells/ X .......... ..........
Stands.
QQQQQ........ Friction Products X .......... ..........
Manufacturing.
SSSSS........ Refractory Products X .......... ..........
Manufacturing.
------------------------------------------------------------------------
\1\ Nevada Division of Environmental Protection.
\2\ Washoe County Air Quality Management Division.
\3\ Clark County Department of Air Quality Management.
* * * * *
[FR Doc. E7-8686 Filed 5-7-07; 8:45 am]
BILLING CODE 6560-50-P
