Agency Information Collection Activities; Submission to OMB for Review and Approval; Comment Request; NESHAP for Flexible Polyurethane Foam Production (Renewal), EPA ICR Number 1783.04, OMB Control Number 2060-0357, 18989-18990 [E7-7144]
Download as PDF
Federal Register / Vol. 72, No. 72 / Monday, April 16, 2007 / Notices
of a pesticide product. In general, EUP’s
are issued either for a pesticide not
registered with the Agency or for a
registered pesticide for a use not
registered with the Agency. The permit
applications are voluntarily submitted
to the Agency, however applicants must
submit the applicable information to be
granted a permit.
Burden Statement: The annual public
reporting and recordkeeping burden for
this collection of information is
estimated to average about 10 hours per
response. Burden means the total time,
effort, or financial resources expended
by persons to generate, maintain, retain,
or disclose or provide information to or
for a Federal agency. This includes the
time needed to review instructions;
develop, acquire, install, and utilize
technology and systems for the purposes
of collecting, validating, and verifying
information, processing and
maintaining information, and disclosing
and providing information; adjust the
existing ways to comply with any
previously applicable instructions and
requirements which have subsequently
changed; train personnel to be able to
respond to a collection of information;
search data sources; complete and
review the collection of information;
and transmit or otherwise disclose the
information.
Respondents/Affected Entities:
Pesticide Registrants and other
agricultural chemical manufacturing.
Estimated Number of Respondents:
75.
Frequency of Response: On occasion.
Estimated Total Annual Hour Burden:
757.
Estimated Total Annual Labor Cost:
$48,237.
Changes in the Estimates: There is no
change of hours in the total estimated
burden currently identified in the OMB
Inventory of Approved ICR Burdens.
Dated: April 6, 2007.
Robert Gunter,
Acting Director, Collection Strategies
Division.
[FR Doc. E7–7143 Filed 4–13–07; 8:45 am]
cprice-sewell on PROD1PC66 with NOTICES
BILLING CODE 6560–50–P
VerDate Aug<31>2005
15:24 Apr 13, 2007
ENVIRONMENTAL PROTECTION
AGENCY
[EPA–HQ–OECA–2006–0751; FRL–8299–3]
Agency Information Collection
Activities; Submission to OMB for
Review and Approval; Comment
Request; NESHAP for Flexible
Polyurethane Foam Production
(Renewal), EPA ICR Number 1783.04,
OMB Control Number 2060–0357
Environmental Protection
Agency (EPA).
ACTION: Notice.
AGENCY:
SUMMARY: In compliance with the
Paperwork Reduction Act (44 U.S.C.
3501 et seq.), this document announces
that an Information Collection Request
(ICR) has been forwarded to the Office
of Management and Budget (OMB) for
review and approval. This is a request
to renew an existing approved
collection. The ICR which is abstracted
below describes the nature of the
collection and the estimated burden and
cost.
DATES: Additional comments may be
submitted on or before May 16, 2007.
ADDRESSES: Submit your comments,
referencing docket ID number EPA–HQ–
OECA–2006–0751, to (1) EPA online
using www.regulations.gov (our
preferred method), or by e-mail to
docket.oeca@epa.gov, or by mail to: EPA
Docket Center (EPA/DC), Environmental
Protection Agency, Enforcement and
Compliance Docket and Information
Center, mail code 2201T, 1200
Pennsylvania Avenue, NW.,
Washington, DC 20460, and (2) OMB at:
Office of Information and Regulatory
Affairs, Office of Management and
Budget (OMB), Attention: Desk Officer
for EPA, 725 17th Street, NW.,
Washington, DC 20503.
FOR FURTHER INFORMATION CONTACT:
´
´
Marıa Malave, Compliance Assessment
and Media Programs Division (Mail
Code 2223A), Office of Compliance,
Environmental Protection Agency, 1200
Pennsylvania Avenue, NW.,
Washington, DC 20460; telephone
number: (202) 564–7027; fax number:
(202) 564–0050; e-mail address:
malave.maria@epa.gov.
EPA has
submitted the following ICR to OMB for
review and approval according to the
procedures prescribed in 5 CFR 1320.12.
On October 6, 2006 (71 FR 58853), EPA
sought comments on this ICR pursuant
to 5 CFR 1320.8(d). EPA received no
comments. Any additional comments on
this ICR should be submitted to EPA
and OMB within 30 days of this notice.
SUPPLEMENTARY INFORMATION:
Jkt 211001
PO 00000
Frm 00043
Fmt 4703
Sfmt 4703
18989
EPA has established a public docket
for this ICR under docket ID number
EPA–OECA–2006–0751, which is
available for public viewing online at
https://www.regulations.gov, in person
viewing at the Enforcement and
Compliance Docket in the EPA Docket
Center (EPA/DC), EPA West, Room
3334, 1301 Constitution Avenue, NW.,
Washington, DC. The EPA Docket
Center Public Reading Room is open
from 8:30 a.m. to 4:30 p.m., Monday
through Friday, excluding legal
holidays. The telephone number for the
Reading Room is (202) 566–1744, and
the telephone number for the
Enforcement and Compliance Docket is
(202) 566–1927.
Use EPA’s electronic docket and
comment system at https://
www.regulations.gov, to submit or view
public comments, access the index
listing of the contents of the docket, and
to access those documents in the docket
that are available electronically. Once in
the system, select ‘‘docket search,’’ then
key in the docket ID number identified
above. Please note that EPA’s policy is
that public comments, whether
submitted electronically or in paper,
will be made available for public
viewing at https://www.regulations.gov,
as EPA receives them and without
change, unless the comment contains
copyrighted material, CBI, or other
information whose public disclosure is
restricted by statute. For further
information about the electronic docket,
go to www.regulations.gov.
Title: NESHAP for Flexible
Polyurethane Foam Production
(Renewal).
ICR Numbers: EPA ICR Number
1783.04, OMB Control Number 2060–
0357.
ICR Status: This ICR is scheduled to
expire on May 30, 2007. Under OMB
regulations, the Agency may continue to
conduct or sponsor the collection of
information while this submission is
pending at OMB. An Agency may not
conduct or sponsor, and a person is not
required to respond to, a collection of
information unless it displays a
currently valid OMB control number.
The OMB control numbers for EPA’s
regulations in title 40 of the CFR, after
appearing in the Federal Register when
approved, are listed in 40 CFR part 9,
and displayed either by publication in
the Federal Register or by other
appropriate means, such as on the
related collection instrument or form, if
applicable. The display of OMB control
numbers in certain EPA regulations is
consolidated in 40 CFR part 9.
Abstract: The Maximum Achievable
Control Technology (MACT) Standards
for Flexible Polyurethane Foam
E:\FR\FM\16APN1.SGM
16APN1
cprice-sewell on PROD1PC66 with NOTICES
18990
Federal Register / Vol. 72, No. 72 / Monday, April 16, 2007 / Notices
Production, published at 40 CFR part
63, subpart III, were proposed on
December 27, 1996, and promulgated on
October 7, 1998. These standards apply
to owners or operators of new and
existing facilities that engage in the
manufacture of flexible polyurethane
foam products which emit hazardous air
pollutants (HAPs). This includes
facilities making slabstock flexible
polyurethane foam (slabstock foam),
rebond flexible polyurethane foam
(rebond foam), and/or molded flexible
polyurethane foam (molded foam).
In general, all MACT standards
require initial notifications,
performance tests, and periodic reports.
Owners or operators of flexible
polyurethane foam production facilities
to which this rule is applicable must
choose one of the compliance options
described in the standard or reduce
HAP emissions to below the compliance
level. Specifically, the rule requirements
for slabstock foam producers include an
initial notification, notification of
compliance status, semiannual reports
and annual compliance certifications. In
addition, respondents are required to
submit a precompliance report that
describes the HAP compliance
procedures, and recordkeeping
procedures. Those electing to comply
with the slabstock foam emission
limitation using recovery devices must
measure and record emissions as
specified in 40 CFR 63.1297 of the rule.
The rule requirements for molded and
rebond foam producers include a
notification of compliance status report
and an annual compliance certification.
These notifications, reports, and records
are essential in determining compliance,
and are required of all sources subject
to MACT.
Any owner or operator subject to the
provisions of this part shall maintain a
file of these measurements, and retain
the file for at least five years following
the date of such measurements,
maintenance reports, and records. All
reports are sent to the delegated state or
local authority. In the event that there
is no such delegated authority, the
reports are sent directly to the United
States Environmental Protection Agency
(EPA) regional office.
Burden Statement: The annual public
reporting and recordkeeping burden for
this collection of information is
estimated to average 43 hours per
response. Burden means the total time,
effort, or financial resources expended
by persons to generate, maintain, retain,
or disclose or provide information to or
for a Federal agency. This includes the
time needed to review instructions;
develop, acquire, install, and utilize
technology and systems for the purposes
VerDate Aug<31>2005
15:24 Apr 13, 2007
Jkt 211001
of collecting, validating, and verifying
information, processing and
maintaining information, and disclosing
and providing information; adjust the
existing ways to comply with any
previously applicable instructions and
requirements which have subsequently
changed; train personnel to be able to
respond to a collection of information;
search data sources; complete and
review the collection of information;
and transmit or otherwise disclose the
information.
Respondents/Affected Entities:
Flexible polyurethane foam production
facilities.
Estimated Number of Respondents:
132.
Frequency of Response: Initially,
semiannually and annually.
Estimated Total Annual Hour Burden:
9,047.
Estimated Total Annual Cost:
$572,320, which includes $0 annual
Startup costs, $0 Operating and
Maintenance (O&M) costs, and $572,320
annualized Labor costs.
Changes in the Estimates: There is no
change in the labor hours or cost in this
ICR compared to the previous ICR. This
is due to two considerations. First, the
regulations have not changed over the
past three years and are not anticipated
to change over the next three years.
Second, the growth rate for the industry
is very low, negative or non-existent, so
there is no significant change in the
overall burden.
Dated: April 6, 2007.
Robert Gunter,
Acting Director, Collection Strategies
Division.
[FR Doc. E7–7144 Filed 4–13–07; 8:45 am]
BILLING CODE 6560–50–P
ENVIRONMENTAL PROTECTION
AGENCY
[EPA–HQ–OECA–2006–0719; FRL–8299–2]
Agency Information Collection
Activities; Submission to OMB for
Review and Approval; Comment
Request; NESHAP for Phosphoric Acid
Manufacturing and Phosphate
Fertilizers Production, (Renewal); EPA
ICR Number 1790.04, OMB Control
Number 2060–0361
Environmental Protection
Agency (EPA).
ACTION: Notice.
AGENCY:
SUMMARY: In compliance with the
Paperwork Reduction Act (44 U.S.C.
3501 et seq.), this document announces
that an Information Collection Request
(ICR) has been forwarded to the Office
PO 00000
Frm 00044
Fmt 4703
Sfmt 4703
of Management and Budget (OMB) for
review and approval. This is a request
to renew an existing approved
collection. This ICR is scheduled to
expire on May 31, 2007. Under OMB
regulations, the Agency may continue to
conduct, or sponsor the collection of
information while this submission is
pending at OMB. This ICR describes the
nature of the information collection and
its estimated burden and cost.
DATES: Additional comments may be
submitted on or before May 16, 2007.
ADDRESSES: Submit your comments,
referencing docket ID number EPA–HQ–
OECA–2006–0719, to (1) EPA online,
using www.regulations.gov (our
preferred method), by e-mail to
docket.oeca@epa.gov, or by mail to: EPA
Docket Center (EPA/DC), Environmental
Protection Agency, Enforcement and
Compliance Docket and Information
Center, Mail Code 2201T, 1200
Pennsylvania Avenue, NW.,
Washington, DC 20460, and (2) OMB at:
Office of Information and Regulatory
Affairs, Office of Management and
Budget (OMB), Attention: Desk Officer
for EPA, 725 17th Street, NW.,
Washington, DC 20503.
FOR FURTHER INFORMATION CONTACT:
Learia Williams, Compliance
Assessment and Media Programs
Division, Office of Compliance, Mail
Code 2223A, Environmental Protection
Agency, 1200 Pennsylvania Avenue,
NW., Washington, DC 20460; telephone
number: (202) 564–4113; fax number:
(202) 564–0050; e-mail address:
williams.learia@epa.gov.
SUPPLEMENTARY INFORMATION: EPA has
submitted the following ICR to OMB for
review and approval according to the
procedures prescribed in 5 CFR 1320.12.
On October 5, 2006 (71 FR 38853), EPA
sought comments on this ICR pursuant
to 5 CFR 1320.8(d). EPA received no
comments.
EPA has established a public docket
for this ICR under Docket ID Number
EPA–HQ–OECA–2006–0719, which is
available for online viewing at https://
www.regulations.gov, or in person
viewing at the Enforcement and
Compliance Docket and Information
Center in the EPA Docket Center (EPA/
DC), EPA West, Room 3334, 1301
Constitution Avenue, NW., Washington,
DC. The EPA Docket Center Public
Reading Room is open from 8:30 a.m. to
4:30 p.m., Monday through Friday,
excluding legal holidays. The telephone
number for the Reading Room is (202)
566–1744, and the telephone number for
the Enforcement and Compliance
Docket Center is (202) 566–1927.
Use EPA’s electronic docket and
comment system at https://www.epa.gov,
E:\FR\FM\16APN1.SGM
16APN1
Agencies
[Federal Register Volume 72, Number 72 (Monday, April 16, 2007)]
[Notices]
[Pages 18989-18990]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: E7-7144]
-----------------------------------------------------------------------
ENVIRONMENTAL PROTECTION AGENCY
[EPA-HQ-OECA-2006-0751; FRL-8299-3]
Agency Information Collection Activities; Submission to OMB for
Review and Approval; Comment Request; NESHAP for Flexible Polyurethane
Foam Production (Renewal), EPA ICR Number 1783.04, OMB Control Number
2060-0357
AGENCY: Environmental Protection Agency (EPA).
ACTION: Notice.
-----------------------------------------------------------------------
SUMMARY: In compliance with the Paperwork Reduction Act (44 U.S.C. 3501
et seq.), this document announces that an Information Collection
Request (ICR) has been forwarded to the Office of Management and Budget
(OMB) for review and approval. This is a request to renew an existing
approved collection. The ICR which is abstracted below describes the
nature of the collection and the estimated burden and cost.
DATES: Additional comments may be submitted on or before May 16, 2007.
ADDRESSES: Submit your comments, referencing docket ID number EPA-HQ-
OECA-2006-0751, to (1) EPA online using www.regulations.gov (our
preferred method), or by e-mail to docket.oeca@epa.gov, or by mail to:
EPA Docket Center (EPA/DC), Environmental Protection Agency,
Enforcement and Compliance Docket and Information Center, mail code
2201T, 1200 Pennsylvania Avenue, NW., Washington, DC 20460, and (2) OMB
at: Office of Information and Regulatory Affairs, Office of Management
and Budget (OMB), Attention: Desk Officer for EPA, 725 17th Street,
NW., Washington, DC 20503.
FOR FURTHER INFORMATION CONTACT: Mar[iacute]a Malav[eacute], Compliance
Assessment and Media Programs Division (Mail Code 2223A), Office of
Compliance, Environmental Protection Agency, 1200 Pennsylvania Avenue,
NW., Washington, DC 20460; telephone number: (202) 564-7027; fax
number: (202) 564-0050; e-mail address: malave.maria@epa.gov.
SUPPLEMENTARY INFORMATION: EPA has submitted the following ICR to OMB
for review and approval according to the procedures prescribed in 5 CFR
1320.12. On October 6, 2006 (71 FR 58853), EPA sought comments on this
ICR pursuant to 5 CFR 1320.8(d). EPA received no comments. Any
additional comments on this ICR should be submitted to EPA and OMB
within 30 days of this notice.
EPA has established a public docket for this ICR under docket ID
number EPA-OECA-2006-0751, which is available for public viewing online
at https://www.regulations.gov, in person viewing at the Enforcement and
Compliance Docket in the EPA Docket Center (EPA/DC), EPA West, Room
3334, 1301 Constitution Avenue, NW., Washington, DC. The EPA Docket
Center Public Reading Room is open from 8:30 a.m. to 4:30 p.m., Monday
through Friday, excluding legal holidays. The telephone number for the
Reading Room is (202) 566-1744, and the telephone number for the
Enforcement and Compliance Docket is (202) 566-1927.
Use EPA's electronic docket and comment system at https://
www.regulations.gov, to submit or view public comments, access the
index listing of the contents of the docket, and to access those
documents in the docket that are available electronically. Once in the
system, select ``docket search,'' then key in the docket ID number
identified above. Please note that EPA's policy is that public
comments, whether submitted electronically or in paper, will be made
available for public viewing at https://www.regulations.gov, as EPA
receives them and without change, unless the comment contains
copyrighted material, CBI, or other information whose public disclosure
is restricted by statute. For further information about the electronic
docket, go to www.regulations.gov.
Title: NESHAP for Flexible Polyurethane Foam Production (Renewal).
ICR Numbers: EPA ICR Number 1783.04, OMB Control Number 2060-0357.
ICR Status: This ICR is scheduled to expire on May 30, 2007. Under
OMB regulations, the Agency may continue to conduct or sponsor the
collection of information while this submission is pending at OMB. An
Agency may not conduct or sponsor, and a person is not required to
respond to, a collection of information unless it displays a currently
valid OMB control number. The OMB control numbers for EPA's regulations
in title 40 of the CFR, after appearing in the Federal Register when
approved, are listed in 40 CFR part 9, and displayed either by
publication in the Federal Register or by other appropriate means, such
as on the related collection instrument or form, if applicable. The
display of OMB control numbers in certain EPA regulations is
consolidated in 40 CFR part 9.
Abstract: The Maximum Achievable Control Technology (MACT)
Standards for Flexible Polyurethane Foam
[[Page 18990]]
Production, published at 40 CFR part 63, subpart III, were proposed on
December 27, 1996, and promulgated on October 7, 1998. These standards
apply to owners or operators of new and existing facilities that engage
in the manufacture of flexible polyurethane foam products which emit
hazardous air pollutants (HAPs). This includes facilities making
slabstock flexible polyurethane foam (slabstock foam), rebond flexible
polyurethane foam (rebond foam), and/or molded flexible polyurethane
foam (molded foam).
In general, all MACT standards require initial notifications,
performance tests, and periodic reports. Owners or operators of
flexible polyurethane foam production facilities to which this rule is
applicable must choose one of the compliance options described in the
standard or reduce HAP emissions to below the compliance level.
Specifically, the rule requirements for slabstock foam producers
include an initial notification, notification of compliance status,
semiannual reports and annual compliance certifications. In addition,
respondents are required to submit a precompliance report that
describes the HAP compliance procedures, and recordkeeping procedures.
Those electing to comply with the slabstock foam emission limitation
using recovery devices must measure and record emissions as specified
in 40 CFR 63.1297 of the rule. The rule requirements for molded and
rebond foam producers include a notification of compliance status
report and an annual compliance certification. These notifications,
reports, and records are essential in determining compliance, and are
required of all sources subject to MACT.
Any owner or operator subject to the provisions of this part shall
maintain a file of these measurements, and retain the file for at least
five years following the date of such measurements, maintenance
reports, and records. All reports are sent to the delegated state or
local authority. In the event that there is no such delegated
authority, the reports are sent directly to the United States
Environmental Protection Agency (EPA) regional office.
Burden Statement: The annual public reporting and recordkeeping
burden for this collection of information is estimated to average 43
hours per response. Burden means the total time, effort, or financial
resources expended by persons to generate, maintain, retain, or
disclose or provide information to or for a Federal agency. This
includes the time needed to review instructions; develop, acquire,
install, and utilize technology and systems for the purposes of
collecting, validating, and verifying information, processing and
maintaining information, and disclosing and providing information;
adjust the existing ways to comply with any previously applicable
instructions and requirements which have subsequently changed; train
personnel to be able to respond to a collection of information; search
data sources; complete and review the collection of information; and
transmit or otherwise disclose the information.
Respondents/Affected Entities: Flexible polyurethane foam
production facilities.
Estimated Number of Respondents: 132.
Frequency of Response: Initially, semiannually and annually.
Estimated Total Annual Hour Burden: 9,047.
Estimated Total Annual Cost: $572,320, which includes $0 annual
Startup costs, $0 Operating and Maintenance (O&M) costs, and $572,320
annualized Labor costs.
Changes in the Estimates: There is no change in the labor hours or
cost in this ICR compared to the previous ICR. This is due to two
considerations. First, the regulations have not changed over the past
three years and are not anticipated to change over the next three
years. Second, the growth rate for the industry is very low, negative
or non-existent, so there is no significant change in the overall
burden.
Dated: April 6, 2007.
Robert Gunter,
Acting Director, Collection Strategies Division.
[FR Doc. E7-7144 Filed 4-13-07; 8:45 am]
BILLING CODE 6560-50-P