Sensors and Instrumentation Technical Advisory Committee; Notice of Partially Closed Meeting, 1703 [07-121]
Download as PDF
<![CDATA[
1703
Notices
Federal Register
Vol. 72, No. 9
Tuesday, January 16, 2007
This section of the FEDERAL REGISTER
contains documents other than rules or
proposed rules that are applicable to the
public. Notices of hearings and investigations,
committee meetings, agency decisions and
rulings, delegations of authority, filing of
petitions and applications and agency
statements of organization and functions are
examples of documents appearing in this
section.
DEPARTMENT OF COMMERCE
Foreign–Trade Zones Board
Order No. 1497
Approval for Expansion of Authority
for Subzone 116C, The Premcor
Refining Group Inc., (Oil Refinery), Port
Arthur, Texas
sroberts on PROD1PC70 with NOTICES
Pursuant to its authority under the
Foreign–Trade Zones Act of June 18,
1934, as amended (19 U.S.C. 81a–81u),
the Foreign–Trade Zones Board (the
Board) adopts the following Order:
Whereas, the Foreign–Trade Zone of
Southeast Texas, Inc., grantee of FTZ
116, has requested authority on behalf
of The Premcor Refining Group Inc.
(Premcor), to expand the scope of
manufacturing activity conducted under
zone procedures within Subzone 116C
at the Premcor refinery in Port Arthur,
Texas (FTZ Docket 7–2006, filed 2/21/
2006);
Whereas, notice inviting public
comment has been given in the Federal
Register (71 FR 10641–10642, 3/2/06);
Whereas, the Board adopts the
findings and recommendations of the
examiner’s report, and finds that the
requirements of the FTZ Act and
Board’s regulations would be satisfied,
and that approval of the application
would be in the public interest if
approval is subject to the conditions
listed below;
Now, Therefore, the Board hereby
orders:
The application to expand the scope
of manufacturing authority under zone
procedures within Subzone 116C, is
approved, subject to the FTZ Act and
the Board’s regulations, including
§ 400.28, and subject to the following
conditions:
1. Foreign status (19 CFR § 146.41,
146.42) products consumed as fuel
for the petrochemical complex shall
be subject to the applicable duty
rate.
2. Privileged foreign status (19 CFR
VerDate Aug<31>2005
17:04 Jan 12, 2007
Jkt 211001
§ 146.41) shall be elected on all
foreign merchandise admitted to the
subzone, except that non–privileged
foreign (NPF) status (19 CFR
§ 146.42) may be elected on refinery
inputs covered under HTSUS
Subheadings #2709.00.10,
#2709.00.20, #2710.11.25,
#2710.11.45, #2710.19.05,
#2710.19.10, #2710.19.45,
#2710.91.00, #2710.99.05,
#2710.99.10, #2710.99.16,
#2710.99.21 and #2710.99.45 which
are used in the production of:
-petrochemical feedstocks (examiners
report, Appendix ‘‘C’’);
-products for export;
-and, products eligible for entry under
HTSUS # 9808.00.30 and #
9808.00.40 (U.S. Government
purchases).
Signed at Washington, DC, this 4th day of
January 2007.
David M. Spooner,
Assistant Secretary of Commerce for Import
Administration, Alternate Chairman Foreign–
Trade Zones Board.
Andrew McGilvray,
Executive Secretary.
[FR Doc. E7–460 Filed 1–12–07; 8:45 am]
BILLING CODE 3510–DS–S
DEPARTMENT OF COMMERCE
Bureau of Industry and Security
Sensors and Instrumentation
Technical Advisory Committee; Notice
of Partially Closed Meeting
The Sensors and Instrumentation
Technical Advisory Committee (SITAC)
will meet on January 30, 2007, 9:30
a.m., in the Herbert C. Hoover Building,
Room 6087B, 14th Street between
Constitution and Pennsylvania
Avenues, NW., Washington, DC. The
Committee advises the Office of the
Assistant Secretary for Export
Administration on technical questions
that affect the level of export controls
applicable to sensors and
instrumentation equipment and
technology.
Agenda
Public Session
1. Welcome and Introductions.
2. Remarks from Bureau of Industry
and Security Management.
3. Industry Presentations.
PO 00000
Frm 00001
Fmt 4703
Sfmt 4703
4. New Business: Election of
Chairman(s).
Closed Session
5. Discussion of matters determined to
be exempt from the provisions relating
to public meetings found in 5 U.S.C.
app. 2 Sections 10(a)(1) and 10(a)(3).
A limited number of seats will be
available during the public session of
the meeting. Reservations are not
accepted. To the extent that time
permits, members of the public may
present oral statements to the
Committee. The public may submit
written statements at any time before or
after the meeting. However, to facilitate
distribution of public presentation
materials to the Committee members,
the Committee suggests that the
materials be forwarded before the
meeting to Ms. Yvette Springer at
Yspringer@bis.doc.gov.
The Assistant Secretary for
Administration, with the concurrence of
the General Counsel, formally
determined on November 21, 2006
pursuant to Section 10(d) of the Federal
Advisory Committee Act, as amended (5
U.S.C. app. 2 Section 10(d)), that the
portion of this meeting dealing with predecisional changes to the Commerce
Control List and U.S. export control
policies shall be exempt from the
provisions relating to public meetings
found in 5 U.S.C. app. 2 Sections
10(a)(1) and 10(a)(3). The remaining
portions of the meeting will be open to
the public.
For more information contact Yvette
Springer on (202) 482–2813.
Dated: January 10, 2007.
Yvette Springer,
Committee Liaison Officer.
[FR Doc. 07–121 Filed 1–12–07; 8:45 am]
BILLING CODE 3510–JT–M
DEPARTMENT OF COMMERCE
International Trade Administration
A–583–833
A–580–839
Certain Polyester Staple Fiber From
Taiwan and the Republic of Korea:
Notice of Extension of Time Limit for
the 2005–2006 Administrative Reviews
Import Administration,
International Trade Administration,
Department of Commerce.
AGENCY:
E:\FR\FM\16JAN1.SGM
16JAN1
]]>Agencies
[Federal Register Volume 72, Number 9 (Tuesday, January 16, 2007)]
[Notices]
[Page 1703]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 07-121]
-----------------------------------------------------------------------
DEPARTMENT OF COMMERCE
Bureau of Industry and Security
Sensors and Instrumentation Technical Advisory Committee; Notice
of Partially Closed Meeting
The Sensors and Instrumentation Technical Advisory Committee
(SITAC) will meet on January 30, 2007, 9:30 a.m., in the Herbert C.
Hoover Building, Room 6087B, 14th Street between Constitution and
Pennsylvania Avenues, NW., Washington, DC. The Committee advises the
Office of the Assistant Secretary for Export Administration on
technical questions that affect the level of export controls applicable
to sensors and instrumentation equipment and technology.
Agenda
Public Session
1. Welcome and Introductions.
2. Remarks from Bureau of Industry and Security Management.
3. Industry Presentations.
4. New Business: Election of Chairman(s).
Closed Session
5. Discussion of matters determined to be exempt from the
provisions relating to public meetings found in 5 U.S.C. app. 2
Sections 10(a)(1) and 10(a)(3).
A limited number of seats will be available during the public
session of the meeting. Reservations are not accepted. To the extent
that time permits, members of the public may present oral statements to
the Committee. The public may submit written statements at any time
before or after the meeting. However, to facilitate distribution of
public presentation materials to the Committee members, the Committee
suggests that the materials be forwarded before the meeting to Ms.
Yvette Springer at Yspringer@bis.doc.gov.
The Assistant Secretary for Administration, with the concurrence of
the General Counsel, formally determined on November 21, 2006 pursuant
to Section 10(d) of the Federal Advisory Committee Act, as amended (5
U.S.C. app. 2 Section 10(d)), that the portion of this meeting dealing
with pre-decisional changes to the Commerce Control List and U.S.
export control policies shall be exempt from the provisions relating to
public meetings found in 5 U.S.C. app. 2 Sections 10(a)(1) and
10(a)(3). The remaining portions of the meeting will be open to the
public.
For more information contact Yvette Springer on (202) 482-2813.
Dated: January 10, 2007.
Yvette Springer,
Committee Liaison Officer.
[FR Doc. 07-121 Filed 1-12-07; 8:45 am]
BILLING CODE 3510-JT-M
