Foreign-Trade Zone 51-Duluth, MN Application For Foreign-Trade Subzone Status MAPE USA, Inc. (Crankshafts) Cambridge, MN, 1318 [E7-268]
Download as PDF
<![CDATA[
1318
Federal Register / Vol. 72, No. 7 / Thursday, January 11, 2007 / Notices
foreign components noted above. The
application indicates that FTZ-related
savings would help improve the
facility’s international competitiveness.
In accordance with the Board’s
regulations, a member of the FTZ Staff
has been designated examiner to
investigate the application and report to
the Board.
Public comment is invited from
interested parties. Submissions (original
and 3 copies) shall be addressed to the
Board’s Executive Secretary at the
address listed below. The closing period
for their receipt is March 12, 2007.
Rebuttal comments in response to
material submitted during the foregoing
period may be submitted during the
subsequent 15-day period (to March 27,
2007).
A copy of the application and
accompanying exhibits will be available
for public inspection at each of the
following locations: Quad-City ForeignTrade Zone, Inc., 1830 Second Avenue,
Suite 200, Rock Island, Illinois 61201;
and, Office of the Executive Secretary,
Foreign-Trade Zones Board, Room
2814B, U.S. Department of Commerce,
1401 Constitution Avenue, NW.,
Washington, DC 20230.
Dated: December 28, 2006.
Andrew McGilvray,
Executive Secretary.
[FR Doc. E7–267 Filed 1–10–07; 8:45 am]
BILLING CODE 3510–DS–P
DEPARTMENT OF COMMERCE
Foreign–Trade Zones Board
[Docket 43–2005]
cprice-sewell on PROD1PC66 with NOTICES
Review of Foreign–Trade Zone
Activity, Foreign–Trade Subzone 43D,
Perrigo Company, Battle Creek
Michigan (Ibuprofen–Pharmaceutical
Products)
Pursuant to its review of activity
related to certain merchandise at
Foreign–Trade Subzone 43D, at the
pharmaceutical products manufacturing
facilities of the Perrigo Company in the
Battle Creek, Michigan, area (FTZ Doc.
43–2005, 70 FR 54521, 9/15/05), the
FTZ staff has issued a final report. The
Executive Secretary is concluding the
review without prejudice to any party
because the activity at issue in the
review is now being considered in the
context of notification of a sourcing
change pursuant to 15 CFR Sec.
400.28(a)(3). The above–cited staff
report will be available for public
inspection at the following location:
Office of the Executive Secretary,
Foreign–Trade Zones Board, U.S.
VerDate Aug<31>2005
15:52 Jan 10, 2007
Jkt 211001
Department of Commerce, Room 2814B,
1401 Constitution Ave. NW.,
Washington, DC 20230.
Dated: December 29, 2006.
Andrew McGilvray,
Executive Secretary.
[FR Doc. E7–218 Filed 1–10–07; 8:45 am]
BILLING CODE 3510–DS–S
DEPARTMENT OF COMMERCE
Foreign-Trade Zones Board
[Docket 50–2006]
A copy of the application and
accompanying exhibits will be available
for public inspection at each of the
following locations: Minneapolis Export
Assistance Center, 100 North 6th Street,
Suite 210–C, Minneapolis, MN 55403;
and Office of the Executive Secretary,
Foreign-Trade Zones Board, U.S.
Department of Commerce, Room 2814B,
1401 Constitution Ave. NW.,
Washington, DC 20230.
Dated: December 29, 2006.
Andrew McGilvray,
Executive Secretary.
[FR Doc. E7–268 Filed 1–10–07; 8:45 am]
Foreign-Trade Zone 51—Duluth, MN
Application For Foreign-Trade
Subzone Status MAPE USA, Inc.
(Crankshafts) Cambridge, MN
BILLING CODE 3510–DS–P
An application has been submitted to
the Foreign-Trade Zones Board (the
Board) by the Duluth Seaway Port
Authority, grantee of FTZ 51, requesting
special-purpose subzone status for the
quality-control, warehousing and
distribution facility (crankshafts) of
MAPE USA, Inc. (MAPE), located in
Cambridge, Minnesota. The application
was submitted pursuant to the ForeignTrade Zones Act, as amended (19 U.S.C.
81a–81u), and the regulations of the
Board (15 CFR part 400). It was formally
filed on December 29, 2006.
The facility for which subzone status
is proposed is located at 315 South
Garfield Street in Cambridge, Minnesota
(1.7 acres; 24,590 sq. ft. of enclosed
space). The facility (15 employees) may
be used under FTZ procedures for
quality control, warehousing and
distribution of crankshafts.
Zone procedures would allow MAPE
to defer Customs duty payments until
merchandise is shipped from its
facilities to its customers (including as
zone-to-zone transfers). The application
indicates that the company also
anticipates realizing significant
logistical/procedural benefits and that
savings from FTZ procedures could help
improve the facility’s international
competitiveness.
In accordance with the Board’s
regulations, a member of the FTZ Staff
has been designated examiner to
investigate the application and report to
the Board.
Public comment is invited from
interested parties. Submissions (original
and 3 copies) shall be addressed to the
Board’s Executive Secretary at the
address below. The closing period for
their receipt is March 12, 2007. Rebuttal
comments in response to material
submitted during the foregoing period
may be submitted during the subsequent
15-day period to March 27, 2007.
International Trade Administration,
North American Free Trade Agreement,
Article 1904 NAFTA Panel Reviews;
Notice of Panel Decision
PO 00000
Frm 00010
Fmt 4703
Sfmt 4703
DEPARTMENT OF COMMERCE
NAFTA Secretariat, United
States Section, International Trade
Administration, Department of
Commerce.
ACTION: Notice of Panel Decision.
AGENCY:
SUMMARY: On January 5, 2007, the
binational panel issued its decision in
the review of the final results of the
affirmative antidumping duty
determination made by the International
Trade Administration (ITA) respecting
Certain Softwood Lumber Products from
Canada (Secretariat File No. USA–CDA–
2002–1904–02). On October 12, 2006,
ITA filed with the panel, a Motion to
Dismiss this appeal on the ground that
the revocation of the antidumping order
had rendered this proceeding moot. On
October 13, 2006, the Government of
Canada filed a separate motion to
dismiss on the same ground. Neither
motion was filed with the consent of the
other parties of this proceeding. On
October 23, 2006, two Canadian trade
associations opposed the motions to
dismiss, asserting that the revocation of
the antidumping order did not render
this proceeding moot, and urged the
Panel to decide pending motions before
it, including motions seeking
reconsideration of ITA’s most recent
remand determination. Because the
Panel concluded that the October 12,
2006 revocation of the antidumping
order rendered moot this proceeding
and all motions pending at the time of
revocation, the Panel grants the motion
to dismiss. A copy of the complete
panel decision is available from the
NAFTA Secretariat.
FOR FURTHER INFORMATION CONTACT:
Caratina L. Alston, United States
Secretary, NAFTA Secretariat, Suite
E:\FR\FM\11JAN1.SGM
11JAN1
]]>Agencies
[Federal Register Volume 72, Number 7 (Thursday, January 11, 2007)]
[Notices]
[Page 1318]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: E7-268]
-----------------------------------------------------------------------
DEPARTMENT OF COMMERCE
Foreign-Trade Zones Board
[Docket 50-2006]
Foreign-Trade Zone 51--Duluth, MN Application For Foreign-Trade
Subzone Status MAPE USA, Inc. (Crankshafts) Cambridge, MN
An application has been submitted to the Foreign-Trade Zones Board
(the Board) by the Duluth Seaway Port Authority, grantee of FTZ 51,
requesting special-purpose subzone status for the quality-control,
warehousing and distribution facility (crankshafts) of MAPE USA, Inc.
(MAPE), located in Cambridge, Minnesota. The application was submitted
pursuant to the Foreign-Trade Zones Act, as amended (19 U.S.C. 81a-
81u), and the regulations of the Board (15 CFR part 400). It was
formally filed on December 29, 2006.
The facility for which subzone status is proposed is located at 315
South Garfield Street in Cambridge, Minnesota (1.7 acres; 24,590 sq.
ft. of enclosed space). The facility (15 employees) may be used under
FTZ procedures for quality control, warehousing and distribution of
crankshafts.
Zone procedures would allow MAPE to defer Customs duty payments
until merchandise is shipped from its facilities to its customers
(including as zone-to-zone transfers). The application indicates that
the company also anticipates realizing significant logistical/
procedural benefits and that savings from FTZ procedures could help
improve the facility's international competitiveness.
In accordance with the Board's regulations, a member of the FTZ
Staff has been designated examiner to investigate the application and
report to the Board.
Public comment is invited from interested parties. Submissions
(original and 3 copies) shall be addressed to the Board's Executive
Secretary at the address below. The closing period for their receipt is
March 12, 2007. Rebuttal comments in response to material submitted
during the foregoing period may be submitted during the subsequent 15-
day period to March 27, 2007.
A copy of the application and accompanying exhibits will be
available for public inspection at each of the following locations:
Minneapolis Export Assistance Center, 100 North 6th Street, Suite 210-
C, Minneapolis, MN 55403; and Office of the Executive Secretary,
Foreign-Trade Zones Board, U.S. Department of Commerce, Room 2814B,
1401 Constitution Ave. NW., Washington, DC 20230.
Dated: December 29, 2006.
Andrew McGilvray,
Executive Secretary.
[FR Doc. E7-268 Filed 1-10-07; 8:45 am]
BILLING CODE 3510-DS-P
