Certain New Chemicals; Receipt and Status Information, 75546-75551 [E6-21428]
Download as PDF
<![CDATA[
75546
Federal Register / Vol. 71, No. 241 / Friday, December 15, 2006 / Notices
I. 75 PREMANUFACTURE NOTICES RECEIVED FROM: 09/18/06 TO 10/13/06—Continued
P–07–0040
10/13/06
Projected
Notice
End Date
Manufacturer/Importer
Use
Chemical
01/10/07
Received
Date
Case No.
Piedmont Chemical Industries I, LLC
(S) Binder resin for polyester fabric
knit and nonwoven; binder resin for
mattress ticking polyester/polypropylene knit; binder resin for
nylon strapping
(S) 2,6-naphthalenedicarboxylic acid,
dimethyl ester, polymer with 1,3benzenedicarboxylic
acid,
1,4benzenedicarboxylic
acid,
1,3dihydro-1,3-dioxo-5isobenzofurancarboxylic acid, 1,2ethanediol and 2,2′-oxybis[ethanol],
ammonium salt
In Table II of this unit, EPA provides
the following information (to the extent
that such information is not claimed as
CBI) on the Notices of Commencement
to manufacture received:
II. 19 NOTICES OF COMMENCEMENT FROM: 09/18/06 TO 10/13/06
Case No.
Commencement
Notice End Date
Received Date
P–03–0837
P–05–0048
P–05–0484
09/21/06
09/18/06
04/07/06
09/07/06
02/28/05
03/09/06
P–05–0551
P–05–0694
P–06–0092
P–06–0176
P–06–0196
P–06–0200
P–06–0272
P–06–0288
P–06–0366
P–06–0448
P–06–0463
P–06–0535
P–06–0539
P–06–0543
P–06–0596
04/07/06
04/07/06
04/07/06
09/25/06
09/26/06
09/21/06
09/27/06
09/27/06
09/18/06
09/18/06
08/17/06
09/21/06
09/19/06
09/19/06
09/15/06
03/09/06
03/09/06
03/09/06
09/05/06
08/01/06
09/12/06
09/05/06
09/18/06
09/08/06
09/07/06
07/29/06
08/22/06
08/22/06
08/22/06
09/07/06
P–06–0606
09/27/06
09/13/06
List of Subjects
Environmental protection, Chemicals,
Premanufacturer notices.
Dated: December 7, 2006.
Bernice Mudd,
Acting Director, Information Management
Division, Office of Pollution Prevention and
Toxics.
[FR Doc. E6–21425 Filed 12–14–06; 8:45 am]
BILLING CODE 6560–50–S
ENVIRONMENTAL PROTECTION
AGENCY
mstockstill on PROD1PC61 with NOTICES
[EPA–HQ–OPPT–2006–0967; FRL–8106–7]
Certain New Chemicals; Receipt and
Status Information
Environmental Protection
Agency (EPA).
ACTION: Notice.
AGENCY:
VerDate Aug<31>2005
15:47 Dec 14, 2006
Jkt 211001
Chemical
(G) Aliphatic polyisocyanate
(G) Phthalocyanine compound
(G)
Polyoxyethylene
polyxoxypropylene
polymer,
reaction
with
cyclohexylmethane diisocyanate and polyoxyphenyl derivative
(G) Polyalkylene glycol alkyl ether, reaction products with allyl glycidyl ether
(G) Polyalkylene glycol aryl ether, reaction products with formaldehyde
(G) Oxirane,methyl-, polymer with oxirane, fatty acid alkyl ethers
(G) Acrylate ester
(G) Tdi prepolymer based on hybrid caprolactone polyol
(G) Hydroxy carboxylic acid amide, N,N-dialkyl derivates
(G) Alkylenedicarboxylic dichloride, polymer with dihydroxybenzene
(G) Hydroxylated diester of a triamine
(G) Isocyanate functional polyester polyether urethane polymer
(G) Fatty acid salt of alkyldiamine
(S) Borate(1-), bis [ethanedioato (2-)- .kappa. 01, .kappa. 02] -lithium, (t-4)(G) Ester urethane
(G) Methyl propylhexanol
(G) Methyl propylhexanol
(S) 1h-indene, 2,3,3a,4,5,7a-hexahydro-1,1,2,3,3-pentamethyl-6-(2-propenyl)2h-indeno[4,5-b]furan, decahydro-2,6,6,7,8,8-hexamethyl(S) 1-propanamine, 3-(triethoxysilyl)-, reaction products with boehmite (al(oh)o)
SUMMARY: Section 5 of the Toxic
Substances Control Act (TSCA) requires
any person who intends to manufacture
(defined by statute to include import) a
new chemical (i.e., a chemical not on
the TSCA Inventory) to notify EPA and
comply with the statutory provisions
pertaining to the manufacture of new
chemicals. Under sections 5(d)(2) and
5(d)(3) of TSCA, EPA is required to
publish a notice of receipt of a
premanufacture notice (PMN) or an
application for a test marketing
exemption (TME), and to publish
periodic status reports on the chemicals
under review and the receipt of notices
of commencement to manufacture those
chemicals. This status report, which
covers the period from October 16, 2006
to November 12, 2006, consists of the
PMNs and TMEs, both pending or
expired, and the notices of
commencement to manufacture a new
PO 00000
Frm 00072
Fmt 4703
Sfmt 4703
chemical that the Agency has received
under TSCA section 5 during this time
period.
DATES: Comments identified by the
specific PMN number or TME number,
must be received on or before January
16, 2007.
ADDRESSES: Submit your comments,
identified by docket identification (ID)
no. EPA–HQ–OPPT–2006–0967, by one
of the following methods.
• Federal eRulemaking Portal: https://
www.regulations.gov. Follow the on-line
instructions for submitting comments.
• Mail: Document Control Office
(7407M), Office of Pollution Prevention
and Toxics (OPPT), Environmental
Protection Agency, 1200 Pennsylvania
Ave., NW., Washington, DC 20460-0001.
• Hand Delivery: OPPT Document
Control Office (DCO, EPA East Bldg.,
Rm. 6428, 1201 Constitution Ave., NW.,
Washington, DC. Attention: Docket ID
E:\FR\FM\15DEN1.SGM
15DEN1
mstockstill on PROD1PC61 with NOTICES
Federal Register / Vol. 71, No. 241 / Friday, December 15, 2006 / Notices
number EPA–HQ–OPPT–2006–0967.
The DCO is open from 8 a.m. to 4 p.m.,
Monday through Friday, excluding legal
holidays. The telephone number for the
DCO is (202) 564-8930. Such deliveries
are only accepted during the Docket’s
normal hours of operation, and special
arrangements should be made for
deliveries of boxed information.
Instructions: Direct your comments to
docket ID number EPA–HQ–OPPT–
2006–0967. EPA’s policy is that all
comments received will be included in
the public docket without change and
may be made available online at https://
www.regulations.gov, including any
personal information provided, unless
the comment includes information
claimed to be Confidential Business
Information (CBI) or other information
whose disclosure is restricted by statute.
Do not submit information that you
consider to be CBI or otherwise
protected through regulations.gov or email. The regulations.gov website is an
‘‘anonymous access’’ systems, which
means EPA will not know your identity
or contact information unless you
provide it in the body of your comment.
If you send an e-mail comment directly
to EPA without going through
regulations.gov your e-mail address will
be automatically captured and included
as part of the comment that is placed in
the public docket and made available on
the Internet. If you submit an electronic
comment, EPA recommends that you
include your name and other contact
information in the body of your
comment and with any disk or CD ROM
you submit. If EPA cannot read your
comment due to technical difficulties
and cannot contact you for clarification,
EPA may not be able to consider your
comment. Electronic files should avoid
the use of special characters, any form
of encryption, and be free of any defects
or viruses.
Docket: All documents in the docket
are listed in the regulations.gov index.
Although listed in the index, some
information is not publicly available,
e.g., CBI or other information whose
disclosure is restricted by statute.
Certain other material, such as
copyrighted material, will be publicly
available only in hard copy. Publicly
available docket materials are available
electronically at https://
www.regulations.gov, or, if only
available in hard copy, at the OPPT
Docket, EPA Docket Center (EPA/DC).
The EPA/DC suffered structural damage
due to flooding in June 2006. Although
the EPA/DC is continuing operations,
there will be temporary changes to the
EPA/DC during the clean-up. The EPA/
DC Public Reading Room, which was
temporarily closed due to flooding, has
VerDate Aug<31>2005
15:47 Dec 14, 2006
Jkt 211001
been relocated in the EPA Headquarters
Library, Infoterra Room (Room Number
3334) in the EPA West Building, located
at 1301 Constitution Ave., NW.,
Washington, DC. The EPA/DC Public
Reading Room is open from 8:30 a.m. to
4:30 p.m., Monday through Friday,
excluding legal holidays. The telephone
number of the EPA/DC Public Reading
Room is (202) 566–1744, and the
telephone number for the OPPT Docket
is (202) 566–0280. EPA visitors are
required to show photographic
identification and sign the EPA visitor
log. Visitors to the EPA/DC Public
Reading Room will be provided with an
EPA/DC badge that must be visible at all
times while in the EPA Building and
returned to the guard upon departure. In
addition, security personnel will escort
visitors to and from the new EPA/DC
Public Reading Room location. Up-todate information about the EPA/DC is
on the EPA web site at https://
www.epa.gov/epahome/dockets.htm.
FOR FURTHER INFORMATION CONTACT:
Colby Lintner, Regulatory Coordinator,
Environmental Assistance Division,
Office of Pollution Prevention and
Toxics (7408M), Environmental
Protection Agency, 1200 Pennsylvania
Ave., NW., Washington, DC 20460–
0001; telephone number: (202) 554–
1404; e-mail address: TSCAHotline@epa.gov.
SUPPLEMENTARY INFORMATION:
I. General Information
A. Does this Action Apply to Me?
This action is directed to the public
in general. As such, the Agency has not
attempted to describe the specific
entities that this action may apply to.
Although others may be affected, this
action applies directly to the submitter
of the premanufacture notices addressed
in the action. If you have any questions
regarding the applicability of this action
to a particular entity, consult the person
listed under FOR FURTHER INFORMATION
CONTACT.
B. What Should I Consider as I Prepare
My Comments for EPA?
1. Submitting CBI. Do not submit this
information to EPA through
regulations.gov or e-mail. Clearly mark
the part or all of the information that
you claim to be CBI. For CBI
information in a disk or CD ROM that
you mail to EPA, mark the outside of the
disk or CD ROM as CBI and then
identify electronically within the disk or
CD ROM the specific information that is
claimed CBI). In addition to one
complete version of the comment that
includes information claimed as CBI, a
copy of the comment that does not
PO 00000
Frm 00073
Fmt 4703
Sfmt 4703
75547
contain the information claimed as CBI
must be submitted for inclusion in the
public docket. Information so marked
will not be disclosed except in
accordance with procedures set forth in
40 CFR part 2.
2. Tips for preparing your comments.
When submitting comments, remember
to:
i. Identify the document by docket
number and other identifying
information (subject heading, Federal
Register date and page number).
ii. Follow directions - The agency may
ask you to respond to specific questions
or organize comments by referencing a
Code of Federal Regulations (CFR) part
or section number.
iii. Explain why you agree or disagree;
suggest alternatives and substitute
language for your requested changes.
iv. Describe any assumptions and
provide any technical information and/
or data that you used.
v. If you estimate potential costs or
burdens, explain how you arrived at the
estimate.
vi. Provide specific examples to
illustrate your concerns, and suggested
alternatives.
vii. Explain your views as clearly as
possible, avoiding the use of profanity
or personal threats.
viii. Make sure to submit your
comments by the comment period
deadline identified.
II. Why is EPA Taking this Action?
Section 5 of TSCA requires any
person who intends to manufacture
(defined by statute to include import) a
new chemical (i.e., a chemical not on
the TSCA Inventory to notify EPA and
comply with the statutory provisions
pertaining to the manufacture of new
chemicals. Under sections 5(d)(2) and
5(d)(3) of TSCA, EPA is required to
publish a notice of receipt of a PMN or
an application for a TME and to publish
periodic status reports on the chemicals
under review and the receipt of notices
of commencement to manufacture those
chemicals. This status report, which
covers the period from October 16, 2006
to November 12, 2006, consists of the
PMNs and TMEs, both pending or
expired, and the notices of
commencement to manufacture a new
chemical that the Agency has received
under TSCA section 5 during this time
period.
III. Receipt and Status Report for PMNs
This status report identifies the PMNs
and TMEs, both pending or expired, and
the notices of commencement to
manufacture a new chemical that the
Agency has received under TSCA
section 5 during this time period. If you
E:\FR\FM\15DEN1.SGM
15DEN1
75548
Federal Register / Vol. 71, No. 241 / Friday, December 15, 2006 / Notices
are interested in information that is not
included in the following tables, you
may contact EPA as described in Unit II.
to access additional non-CBI
information that may be available.
In Table I of this unit, EPA provides
the following information (to the extent
that such information is not claimed as
CBI) on the PMNs received by EPA
during this period: the EPA case number
assigned to the PMN; the date the PMN
was received by EPA; the projected end
date for EPA’s review of the PMN; the
submitting manufacturer; the potential
uses identified by the manufacturer in
the PMN; and the chemical identity.
I. 46 PREMANUFACTURE NOTICES RECEIVED FROM: 10/02/06 TO 11/12/06
Case No.
Received
Date
Projected
Notice
End Date
Manufacturer/Importer
Use
Chemical
(S) 1,3-benzenedicarboxylic acid,
polymer
with
1,4benzenedicarboxylic
acid,
1,3dihydro-1,3-dioxo-5isobenzofurancarboxylic acid, 2,2′oxybis[ethanol] and 1,3-propanediol
(S) 1,3-benzenedicarboxylic acid,
polymer
with
1,4benzenedicarboxylic
acid,
1,3dihydro-1,3-dioxo-5isobenzofurancarboxylic acid, dimethyl 1,4-benzenedicarboxylate,
1,2-ethanediol and 2,2′-oxybis [ethanol]
(S) 1,3-benzenedicarboxylic acid,
polymer
with
1,4benzenedicarboxylic
acid,
1,4butanediol,1,3-dihydro-1,3-dioxo-5isobenzofurancarboxylic acid, dimethyl
1,4-benzenedicarboxylate
and 2,2′-oxybis[ethanol]
(S) 2,6-naphthalenedicarboxylic acid,
dimethyl ester, polymer with 1,3benzenedicarboxylic
acid,
1,4benzenedicarboxylic
acid,
1,3dihydro-1,3-dioxo-5isobenzofurancarboxylic acid, 1,2ethanediol and 2,2′-oxybis [ethanol]
(G) Polyacrylate resin
10/17/06
01/14/07
Piedmont Chemical Industries I, LLC
(S) Binder resin for polyester fabric
knit and nonwoven; binder resin for
mattress ticking polyester/polypropylene knit; binder resin for
nylon strapping
P–07–0042
10/17/06
01/14/07
Piedmont Chemical Industries I, LLC
(S) Binder resin for polyester fabric
knit and nonwoven; binder resin for
mattress ticking polyester/polypropylene knit; binder resin for
nylon strapping
P–07–0043
10/17/06
01/14/07
Piedmont Chemical Industries I, LLC
(S) Binder resin for polyester fabric
knit and nonwoven; binder resin for
mattress ticking polyester/polypropylene knit; binder resin for
nylon strapping
P–07–0044
10/17/06
01/14/07
Piedmont chemical industries I, LLC
(S) Binder resin for polyester fabric
knit and nonwoven; binder resin for
mattress ticking polyester/polypropylene knit; binder resin for
nylon strapping
P–07–0045
10/17/06
01/14/07
CBI
P–07–0046
10/18/06
01/15/07
International flavors
and fragrances, Inc.
P–07–0047
P–07–0048
10/17/06
10/17/06
01/14/07
01/14/07
CBI
Dupont Company
P–07–0049
10/17/06
01/14/07
Dupont Company
P–07–0050
10/17/06
01/14/07
CBI
(G) Open non dispersive (binder material)
(S) Raw material for use in fragrances for soaps, detergents,
cleaners and other household products
(G) Textile colorant
(G) Raw material for polymer production
(G) Extrusion compounding resin;
molding resin
(G)
Open
non-dispersive
polyurethane resin
P–07–0051
P–07–0052
10/18/06
10/18/06
01/15/07
01/15/07
CBI
Huntsman International, LLC
(G) Metal working fluid
(S) Exhaust application to cotton fabrics
P–07–0053
10/18/06
01/15/07
CBI
P–07–0054
mstockstill on PROD1PC61 with NOTICES
P–07–0041
10/19/06
01/16/07
Henkel Corporation
(S) Flavor ingredient; fragrance ingredient; cosmetic ingredient
(S) A component of adhesive formulations
VerDate Aug<31>2005
15:47 Dec 14, 2006
Jkt 211001
PO 00000
Frm 00074
Fmt 4703
Sfmt 4703
E:\FR\FM\15DEN1.SGM
(S)
4h-indeno[4,5-d]-1,3-dioxole,
3a,5,6,7,8,8b-hexahydro2,2,6,6,7,8,8-heptamethyl(G) Di-substituted acetanilide
(G) Salt of amine with aliphatic acid
(G) Aliphatic polyamide
(G) Polyester polyurethane resin
based
on
1,5-naphthylene
diisocyanate
(G) Polyethylene glycol ether acid
(G)
Benzenesulfonic
acid
azo
benzenesulfonic acid azo substituted naphthalenesulfonic acid
amino substituted triazine amino
substituted phenyl sulfonyl compound
(G) Oils, watermelon, citrullus lanatus
(S) Hexanedioic acid, polymer with
1,3-diisocyanatomethylbenzene and
3-methyl-1,5-pentanediol, propylene
gylcol monomethacrylate-blocked
15DEN1
75549
Federal Register / Vol. 71, No. 241 / Friday, December 15, 2006 / Notices
I. 46 PREMANUFACTURE NOTICES RECEIVED FROM: 10/02/06 TO 11/12/06—Continued
Case No.
Received
Date
Projected
Notice
End Date
Manufacturer/Importer
Use
Chemical
(G) 2-(dimethylamino)ethyl methyl-2propanoate, polymer with alkyl-substituted methyl-2-propanoate and
aryl-substituted
methyl-2propanoate, salt with mono(alkylsubstituted
polyalkoxyether)butanedioates and
alkyl-substituted
polyalkoxyether
phosphate
(G) Modified polyacrylate block polymer
(G) Alkyl substituted tetrahydro pyran
(S) 3-hexene, 1-(2-butenyloxy)-, (3z)-
10/20/06
01/17/07
CBI
(G) Additive, open, non-dispersive
use
P–07–0056
10/23/06
01/20/07
P–07–0057
P–07–0058
10/23/06
10/23/06
01/20/07
01/20/07
CIBA Specialty Chemicals Corporation
Mane, USA
Firmenich Inc.
P–07–0059
10/25/06
01/22/07
CBI
(S) High molecular weight pigment
dispersant for waterborne coatings
(G) Perfumery ingredient
(S) Aroma for use in fragrance mixtures, which in turn are used in perfumes, soaps, cleansers, etc.
(G) Automotive coatings
P–07–0060
P–07–0061
P–07–0062
10/27/06
10/27/06
10/27/06
01/24/07
01/24/07
01/24/07
3M
3M
CBI
(G) Monomer
(G) Adhesive
(G) Raw material
P–07–0063
10/27/06
01/24/07
CBI
(G) Coating component
P–07–0064
P–07–0065
10/30/06
10/30/06
01/27/07
01/27/07
CBI
CBI
P–07–0066
10/30/06
01/27/07
PPG Industries, Inc.
(S) Resin for printing ink
(G) Moisture curing polyurethane adhesives
(G) Component of an automotive
primer
P–07–0067
10/30/06
01/27/07
CBI
(G) Sodium salt of acrylic copolymer
P–07–0068
10/30/06
01/27/07
CBI
P–07–0069
10/25/06
01/22/07
P–07–0070
10/25/06
01/22/07
P–07–0071
10/25/06
01/22/07
P–07–0072
P–07–0073
10/30/06
10/30/06
01/27/07
01/27/07
The Dow Chemical
Company
The Dow Chemical
Company
The Dow Chemical
Company
CBI
CBI
P–07–0074
11/02/06
01/30/07
CBI
P–07–0075
11/02/06
01/30/07
CBI
(G) Open non-dispersive (coatings
application)
(G) Binders for granulated rubber surfacing and molding
(G) Binders for granulated rubber surfacing and molding
(G) Binders for granulated rubber surfacing and molding
(S) Catalyst for production of foam
(G) Ingredient material in paint formulation
(S) Reactive diluent in ultra violet formulations
(G) Additive for paper manufacturing
P–07–0076
11/02/06
01/30/07
CBI
P–07–0077
11/03/06
01/31/07
CBI
P–07–0078
11/03/06
01/31/07
CBI
P–07–0079
P–07–0080
11/03/06
11/08/06
01/31/07
02/05/07
CBI
Cognis Corporation
P–07–0081
mstockstill on PROD1PC61 with NOTICES
P–07–0055
11/08/06
02/05/07
Cognis Corporation
P–07–0082
11/08/06
02/05/07
Cognis Corporation
VerDate Aug<31>2005
15:47 Dec 14, 2006
Jkt 211001
PO 00000
(G) Component of manufactured consumer article-contained use
(G) Raw material for food packaging
container
(G) Additive for paper manufacturing
Frm 00075
(S) Light stabilizer for plastic articles
(S) Biodegradable hydraulic fluid for
use in construction equipment ie.,
bullldozers, cranes etc.
(S) Biodegradable hydraulic fluid for
use in construction equipment ie.,
bull dozers, cranes etc.
(S) Biodegradable hydraulic fluid for
use in construction equipment ie.,
bullldozers, cranes etc.
Fmt 4703
Sfmt 4703
E:\FR\FM\15DEN1.SGM
(G) Cyclic acrylic polymer, peroxide
initiated
(G) Aliphatic acrylate
(G) Acrylate copolymer
(G) Amine salt of carbomonocyclic
acids
(G) Polymer of styrene, acrylic acid
derivatives and alkyl methacrylate
(G) Modified rosin, hydrocarbon resin
(G) Isocyanate terminated urethane
polymer
(G) Trimellitic anhydride, polymer with
alkanediol,
dihydroxyalkane
diglycidyl
ether
di-3,5,5trimethylhexanoate homopolymer,
ethoxylated bis(hydroxysubstituted)
alkane and heteromonocycledione,
compound with 2-(dimethylamino)
ethanol
(G) Sodium salt of an acrylic copolymer
(G) Polyester resin
(G)
Mdi
and
polymeric
prepolymer
(G)
Mdi
and
polymeric
prepolymer
(G)
Mdi
and
polymeric
prepolymer
(G) Alkanoic acid potassium salt
(G) Acrylic resin solution
mdi
mdi
mdi
(G) Alkoxylated pentaerythritol acrylate
(G) Acrylic polymer with vinyl compound, salt
(G)
Benzene,
1,1′-[1,2ethanediylbis(oxy)bis[polymethyl(G) Copolymer of alkene-alkenyl
(G) Acrylic polymer salt with vinyl
compound, salts
(G) Substituted piperidinol, carbonate
(S)
Nonanedioic
acid,
bis(2hexyldecyl) ester
(S)
Nonanedioic
octyldodecyl) ester
acid,
bis(2-
(S)
Decanedioic
hexyldecyl) ester
acid,
bis(2-
15DEN1
75550
Federal Register / Vol. 71, No. 241 / Friday, December 15, 2006 / Notices
I. 46 PREMANUFACTURE NOTICES RECEIVED FROM: 10/02/06 TO 11/12/06—Continued
Received
Date
Case No.
Projected
Notice
End Date
Manufacturer/Importer
P–07–0083
11/08/06
02/05/07
Cognis Corporation
P–07–0084
P–07–0085
11/09/06
11/09/06
02/06/07
02/06/07
P–07–0086
11/09/06
02/06/07
CBI
Cytec Surface Specialties Inc.
CBI
In Table II of this unit, EPA provides
the following information (to the extent
Use
Chemical
(S) Biodegradable hydraulic fluid for
use in construction equipment ie.,
bullldozers, cranes etc.
(G) Open, non-dispersive use
(G) Coatings resin
(S)
Decanedioic
octyldodecyl) ester
acid,
bis(2-
(G) Open, non-dispersive use
(G) Water disperisible polyurethane
(G) Polyester polyol
(G) Acrylated aliphatic polyurethane
that such information is not claimed as
CBI) on the TMEs received:
II. 1 TEST MARKETING EXEMPTION NOTICES RECEIVED FROM: 10/02/06 TO 11/12/06
T–07–0001
11/09/06
Projected
Notice
End Date
Manufacturer/Importer
12/23/06
Received
Date
Case No.
Cytec Surface Specialties Inc.
In Table III of this unit, EPA provides
the following information (to the extent
that such information is not claimed as
Use
Chemical
(G) Coating resin
(G) Acrylated aliphatic polyurethane
CBI) on the Notices of Commencement
to manufacture received:
III. 57 NOTICES OF COMMENCEMENT FROM: 10/02/06 TO 11/12/00
Case No.
Received Date
Commencement
Notice End Date
04/07/06
03/09/06
P–05–0551
P–05–0694
P–06–0092
J–05–0001
J–05–0002
J–06–0001
P–01–0084
04/07/06
04/07/06
04/07/06
10/03/06
10/03/06
10/03/06
10/10/06
03/09/06
03/09/06
03/09/06
08/14/06
08/24/06
08/11/06
09/27/06
P–01–0170
P–03–0273
P–03–0664
P–05–0740
P–05–0742
P–05–0743
P–05–0744
P–05–0745
P–06–0039
P–06–0131
10/05/06
10/12/06
10/02/06
10/02/06
10/02/06
10/02/06
10/02/06
10/02/06
10/04/06
10/02/06
09/12/06
09/25/06
09/20/06
09/13/06
08/30/06
08/30/06
08/30/06
08/30/06
09/28/06
09/13/06
P–06–0172
P–06–0317
P–06–0318
P–06–0320
P–06–0386
10/02/06
10/11/06
10/11/06
10/11/06
10/10/06
09/08/06
09/26/06
09/26/06
09/26/06
09/07/06
P–06–0552
mstockstill on PROD1PC61 with NOTICES
P–05–0484
10/11/06
09/21/06
P–06–0626
P–02–0922
P–03–0847
P–04–0920
P–04–0925
P–04–0926
P–04–0930
P–04–0931
10/10/06
10/25/06
10/31/06
10/17/06
10/17/06
10/17/06
10/16/06
10/16/06
09/26/06
09/30/06
10/25/06
09/21/06
09/15/06
09/15/06
09/10/06
09/10/06
VerDate Aug<31>2005
15:47 Dec 14, 2006
Jkt 211001
PO 00000
Chemical
(G)
Polyoxyethylene
polyxoxypropylene
polymer,
reaction
with
cyclohexylmethane diisocyanate and polyoxyphenyl derivative
(G) Polyalkylene glycol alkyl ether, reaction products with allyl glycidyl ether
(G) Polyalkylene glycol aryl ether, reaction products with formaldehyde
(G) Oxirane,methyl-, polymer with oxirane, fatty acid alkyl ethers
(G) Trichoderma reesei 3236
(G) Trichoderma reesei 3243
(G) Trichoderma reesei 3260
(G) 1,2,4,5-benzenetetracarboxylic acid, tetrakis esters with monohydric alcohols
(S) Acetic acid, [(5-chloro-8-quinolinyl)oxy-], 1-methylhexyl ester
(G) Acrylic polymer
(G) Urethane acrylate resin
(G) Peroxyalkanoic acid
(G) Peroxyalkanoic acid
(G) Peroxyalkanoic acid
(G) Peroxyalkanoic acid
(G) Peroxyalkanoic acid
(G) Aqueous polyurethane dispersion
(S) Siloxanes and silicones, hydroxy me, 3-hydroxypropyl me, me (1oxooctyl)oxy, esters with C12-20 fatty acids, ethers with polyethylene-polypropylene glycol mono-bu ether
(G) Fatty acid polymer with aliphatic diol and aromatic diacid
(G) Polycarbonate polyurethane
(G) Polycarbonate polyurethane resin
(G) Polyurethane dispersion
(S) 1,3-propanediol, 2-butyl-2-ethyl-, polymers with methylated formaldehydemelamine polymer
(S) Tricyclo[7.3.3.15,11]heptasiloxane-3,7,14-triol, 1,3,5,7,9,11,14-heptakis(2methylpropyl)(G) Isocyanate functional polyester urethane polymer
(G) Urethane acrylate dispersion
(G) 14-carbon keto-alkyne
(G) Alkaryl sulfonic acid, metal salts
(G) Alkaryl sulfonic acid
(G) Alkaryl sulfonic acid
(G) Toluene alkylate
(G) Toluene alkylate
Frm 00076
Fmt 4703
Sfmt 4703
E:\FR\FM\15DEN1.SGM
15DEN1
Federal Register / Vol. 71, No. 241 / Friday, December 15, 2006 / Notices
75551
III. 57 NOTICES OF COMMENCEMENT FROM: 10/02/06 TO 11/12/00—Continued
Case No.
Received Date
Commencement
Notice End Date
P–05–0127
P–05–0557
P–06–0114
P–06–0115
P–06–0127
P–06–0167
P–06–0223
P–06–0238
11/02/06
11/01/06
10/20/06
10/20/06
10/25/06
11/03/06
11/06/06
11/01/06
10/20/06
09/13/06
09/21/06
09/21/06
09/18/06
10/16/06
10/19/06
10/17/06
P–06–0261
11/02/06
10/05/06
P–06–0283
P–06–0284
P–06–0289
P–06–0313
P–06–0346
P–06–0510
P–06–0511
P–06–0540
P–06–0548
P–06–0590
P–06–0593
P–06–0599
11/03/06
11/03/06
10/24/06
11/03/06
10/16/06
10/16/06
10/16/06
10/30/06
11/06/06
10/26/06
10/17/06
11/03/06
10/30/06
10/30/06
10/14/06
10/30/06
10/03/06
10/03/06
10/03/06
10/14/06
10/13/06
10/15/06
10/10/06
10/27/06
P–06–0602
P–06–0612
P–06–0644
P–95–1404
10/23/06
11/06/06
10/17/06
10/30/06
09/22/06
10/29/06
10/05/06
10/14/06
List of Subjects
Environmental protection, Chemicals,
Premanufacturer notices.
Dated: December 7, 2006.
Bernice Mudd,
Acting Director, Information Management
Division, Office of Pollution Prevention and
Toxics.
[FR Doc. E6–21428 Filed 12–14–06; 8:45 am]
BILLING CODE 6560–50–S
FEDERAL RESERVE SYSTEM
mstockstill on PROD1PC61 with NOTICES
Formations of, Acquisitions by, and
Mergers of Bank Holding Companies
The companies listed in this notice
have applied to the Board for approval,
pursuant to the Bank Holding Company
Act of 1956 (12 U.S.C. 1841 et seq.)
(BHC Act), Regulation Y (12 CFR Part
225), and all other applicable statutes
and regulations to become a bank
holding company and/or to acquire the
assets or the ownership of, control of, or
the power to vote shares of a bank or
bank holding company and all of the
banks and nonbanking companies
owned by the bank holding company,
including the companies listed below.
VerDate Aug<31>2005
15:47 Dec 14, 2006
Jkt 211001
Chemical
(G) Polymer of alkanepolyol, fatty acid derivative, and disubstituted benzenes
(G) Polyetherethersulfonesulfone block copolymer
(G) Alkaryl sulfonic acid, metal salts
(G) Alkaryl sulfonic acid, metal salts
(G) Modified butyl acrylate
(G) Substituted benzoic acid ester
(G) Heteromonocyclic, 2-mercapto-5,5-dimethyl-, 2-oxide
(S) Fatty acids, C18-unsatd., dimers, hydrogenated, polymers with adipic acid,
1,6-hexanediol, .alpha.-hydro-.omega.-hydroxypoly(oxy-1,4-butanediyl), 3-hydroxy-2-(hydroxymethyl)-2-methylpropanoic
acid,
5-isocyanato-1(isocyanatomethyl)-1, 3,3-trimethylcyclohexane, 2-methyl-1,5-pentanediamine
and 2-oxepanone, compounds with triethylamine
(G)
Alkylenediol,
dialkyl-,
polymer
with
isocyanato(isocyanatoalkyl)trialkylcycloalkane, dipentaerythritol acrylate- and
pentaerythritol acrylate-blocked, homopolymer
(G) Fatty acids, polymers with alkanoic acid, and epoxy resin
(G) Fatty acids, polymers with alkanoic acid and alkoxylated polyols
(G) Polyurethane urea
(G) Alkenoic acid modified vinylic copolymer
(G) Urethane modified polyamide
(G) Polyether modified polydimethylsiloxane
(G) Polyether modified polydimethylsiloxane
(G) Aliphatic polyester - polyether polyurethane dispersion
(G) Substituted trihalomethylpyridine
(G) Polyester polyol
(G) Aliphatic isocyanate resin
(G) Pmn substance b) aromatic substituted bis-dihydropyrrole monosodium salt;
pmn substance c) aromatic substituted bis-dihydropyrrole disodium salt
(G) Silicone modified acrylic polymer
(G) Substituted carbohydrate
(S) Magnesium, bromo(pentafluorophenyl)(G) Unsaturated polyester resin
The applications listed below, as well
as other related filings required by the
Board, are available for immediate
inspection at the Federal Reserve Bank
indicated. The application also will be
available for inspection at the offices of
the Board of Governors. Interested
persons may express their views in
writing on the standards enumerated in
the BHC Act (12 U.S.C. 1842(c)). If the
proposal also involves the acquisition of
a nonbanking company, the review also
includes whether the acquisition of the
nonbanking company complies with the
standards in section 4 of the BHC Act
(12 U.S.C. 1843). Unless otherwise
noted, nonbanking activities will be
conducted throughout the United States.
Additional information on all bank
holding companies may be obtained
from the National Information Center
website at https://www.ffiec.gov/nic/.
Unless otherwise noted, comments
regarding each of these applications
must be received at the Reserve Bank
indicated or the offices of the Board of
Governors not later than January 8,
2007.
A. Federal Reserve Bank of Atlanta
(Andre Anderson, Vice President) 1000
Peachtree Street, N.E., Atlanta, Georgia
30309:
PO 00000
Frm 00077
Fmt 4703
Sfmt 4703
1. InsCorp, Inc. Nashville, Tennessee,
to acquire an additional 50 percent for
the total of 100 percent, of the voting
shares of Insurors Bank of Tennessee,
Nashville, Tennessee.
B. Federal Reserve Bank of
Minneapolis (Jacqueline G. King,
Community Affairs Officer) 90
Hennepin Avenue, Minneapolis,
Minnesota 55480-0291:
1. First National Financial Services
Inc., Elk River, Minnesota; to acquire
100 percent of the voting shares of
Maple Lake Bancorporation, Edina,
Minnesota, and thereby indirectly
acquire voting shares of Security State
Bank of Maple Lake Inc., Maple Lake,
Minnesota.
Board of Governors of the Federal Reserve
System, December 11, 2006.
Robert deV. Frierson,
Deputy Secretary of the Board.
[FR Doc. E6–21322 Filed 12–14–06; 8:45 am]
BILLING CODE 6210–01–S
FEDERAL RESERVE SYSTEM
Formations of, Acquisitions by, and
Mergers of Bank Holding Companies
The companies listed in this notice
have applied to the Board for approval,
E:\FR\FM\15DEN1.SGM
15DEN1
]]>Agencies
[Federal Register Volume 71, Number 241 (Friday, December 15, 2006)]
[Notices]
[Pages 75546-75551]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: E6-21428]
-----------------------------------------------------------------------
ENVIRONMENTAL PROTECTION AGENCY
[EPA-HQ-OPPT-2006-0967; FRL-8106-7]
Certain New Chemicals; Receipt and Status Information
AGENCY: Environmental Protection Agency (EPA).
ACTION: Notice.
-----------------------------------------------------------------------
SUMMARY: Section 5 of the Toxic Substances Control Act (TSCA) requires
any person who intends to manufacture (defined by statute to include
import) a new chemical (i.e., a chemical not on the TSCA Inventory) to
notify EPA and comply with the statutory provisions pertaining to the
manufacture of new chemicals. Under sections 5(d)(2) and 5(d)(3) of
TSCA, EPA is required to publish a notice of receipt of a
premanufacture notice (PMN) or an application for a test marketing
exemption (TME), and to publish periodic status reports on the
chemicals under review and the receipt of notices of commencement to
manufacture those chemicals. This status report, which covers the
period from October 16, 2006 to November 12, 2006, consists of the PMNs
and TMEs, both pending or expired, and the notices of commencement to
manufacture a new chemical that the Agency has received under TSCA
section 5 during this time period.
DATES: Comments identified by the specific PMN number or TME number,
must be received on or before January 16, 2007.
ADDRESSES: Submit your comments, identified by docket identification
(ID) no. EPA-HQ-OPPT-2006-0967, by one of the following methods.
Federal eRulemaking Portal: https://www.regulations.gov.
Follow the on-line instructions for submitting comments.
Mail: Document Control Office (7407M), Office of Pollution
Prevention and Toxics (OPPT), Environmental Protection Agency, 1200
Pennsylvania Ave., NW., Washington, DC 20460-0001.
Hand Delivery: OPPT Document Control Office (DCO, EPA East
Bldg., Rm. 6428, 1201 Constitution Ave., NW., Washington, DC.
Attention: Docket ID
[[Page 75547]]
number EPA-HQ-OPPT-2006-0967. The DCO is open from 8 a.m. to 4 p.m.,
Monday through Friday, excluding legal holidays. The telephone number
for the DCO is (202) 564-8930. Such deliveries are only accepted during
the Docket's normal hours of operation, and special arrangements should
be made for deliveries of boxed information.
Instructions: Direct your comments to docket ID number EPA-HQ-OPPT-
2006-0967. EPA's policy is that all comments received will be included
in the public docket without change and may be made available online at
https://www.regulations.gov, including any personal information
provided, unless the comment includes information claimed to be
Confidential Business Information (CBI) or other information whose
disclosure is restricted by statute. Do not submit information that you
consider to be CBI or otherwise protected through regulations.gov or e-
mail. The regulations.gov website is an ``anonymous access'' systems,
which means EPA will not know your identity or contact information
unless you provide it in the body of your comment. If you send an e-
mail comment directly to EPA without going through regulations.gov your
e-mail address will be automatically captured and included as part of
the comment that is placed in the public docket and made available on
the Internet. If you submit an electronic comment, EPA recommends that
you include your name and other contact information in the body of your
comment and with any disk or CD ROM you submit. If EPA cannot read your
comment due to technical difficulties and cannot contact you for
clarification, EPA may not be able to consider your comment. Electronic
files should avoid the use of special characters, any form of
encryption, and be free of any defects or viruses.
Docket: All documents in the docket are listed in the
regulations.gov index. Although listed in the index, some information
is not publicly available, e.g., CBI or other information whose
disclosure is restricted by statute. Certain other material, such as
copyrighted material, will be publicly available only in hard copy.
Publicly available docket materials are available electronically at
https://www.regulations.gov, or, if only available in hard copy, at the
OPPT Docket, EPA Docket Center (EPA/DC). The EPA/DC suffered structural
damage due to flooding in June 2006. Although the EPA/DC is continuing
operations, there will be temporary changes to the EPA/DC during the
clean-up. The EPA/DC Public Reading Room, which was temporarily closed
due to flooding, has been relocated in the EPA Headquarters Library,
Infoterra Room (Room Number 3334) in the EPA West Building, located at
1301 Constitution Ave., NW., Washington, DC. The EPA/DC Public Reading
Room is open from 8:30 a.m. to 4:30 p.m., Monday through Friday,
excluding legal holidays. The telephone number of the EPA/DC Public
Reading Room is (202) 566-1744, and the telephone number for the OPPT
Docket is (202) 566-0280. EPA visitors are required to show
photographic identification and sign the EPA visitor log. Visitors to
the EPA/DC Public Reading Room will be provided with an EPA/DC badge
that must be visible at all times while in the EPA Building and
returned to the guard upon departure. In addition, security personnel
will escort visitors to and from the new EPA/DC Public Reading Room
location. Up-to-date information about the EPA/DC is on the EPA web
site at https://www.epa.gov/epahome/dockets.htm.
FOR FURTHER INFORMATION CONTACT: Colby Lintner, Regulatory
Coordinator, Environmental Assistance Division, Office of Pollution
Prevention and Toxics (7408M), Environmental Protection Agency, 1200
Pennsylvania Ave., NW., Washington, DC 20460-0001; telephone number:
(202) 554-1404; e-mail address: TSCA-Hotline@epa.gov.
SUPPLEMENTARY INFORMATION:
I. General Information
A. Does this Action Apply to Me?
This action is directed to the public in general. As such, the
Agency has not attempted to describe the specific entities that this
action may apply to. Although others may be affected, this action
applies directly to the submitter of the premanufacture notices
addressed in the action. If you have any questions regarding the
applicability of this action to a particular entity, consult the person
listed under FOR FURTHER INFORMATION CONTACT.
B. What Should I Consider as I Prepare My Comments for EPA?
1. Submitting CBI. Do not submit this information to EPA through
regulations.gov or e-mail. Clearly mark the part or all of the
information that you claim to be CBI. For CBI information in a disk or
CD ROM that you mail to EPA, mark the outside of the disk or CD ROM as
CBI and then identify electronically within the disk or CD ROM the
specific information that is claimed CBI). In addition to one complete
version of the comment that includes information claimed as CBI, a copy
of the comment that does not contain the information claimed as CBI
must be submitted for inclusion in the public docket. Information so
marked will not be disclosed except in accordance with procedures set
forth in 40 CFR part 2.
2. Tips for preparing your comments. When submitting comments,
remember to:
i. Identify the document by docket number and other identifying
information (subject heading, Federal Register date and page number).
ii. Follow directions - The agency may ask you to respond to
specific questions or organize comments by referencing a Code of
Federal Regulations (CFR) part or section number.
iii. Explain why you agree or disagree; suggest alternatives and
substitute language for your requested changes.
iv. Describe any assumptions and provide any technical information
and/or data that you used.
v. If you estimate potential costs or burdens, explain how you
arrived at the estimate.
vi. Provide specific examples to illustrate your concerns, and
suggested alternatives.
vii. Explain your views as clearly as possible, avoiding the use of
profanity or personal threats.
viii. Make sure to submit your comments by the comment period
deadline identified.
II. Why is EPA Taking this Action?
Section 5 of TSCA requires any person who intends to manufacture
(defined by statute to include import) a new chemical (i.e., a chemical
not on the TSCA Inventory to notify EPA and comply with the statutory
provisions pertaining to the manufacture of new chemicals. Under
sections 5(d)(2) and 5(d)(3) of TSCA, EPA is required to publish a
notice of receipt of a PMN or an application for a TME and to publish
periodic status reports on the chemicals under review and the receipt
of notices of commencement to manufacture those chemicals. This status
report, which covers the period from October 16, 2006 to November 12,
2006, consists of the PMNs and TMEs, both pending or expired, and the
notices of commencement to manufacture a new chemical that the Agency
has received under TSCA section 5 during this time period.
III. Receipt and Status Report for PMNs
This status report identifies the PMNs and TMEs, both pending or
expired, and the notices of commencement to manufacture a new chemical
that the Agency has received under TSCA section 5 during this time
period. If you
[[Page 75548]]
are interested in information that is not included in the following
tables, you may contact EPA as described in Unit II. to access
additional non-CBI information that may be available.
In Table I of this unit, EPA provides the following information (to
the extent that such information is not claimed as CBI) on the PMNs
received by EPA during this period: the EPA case number assigned to the
PMN; the date the PMN was received by EPA; the projected end date for
EPA's review of the PMN; the submitting manufacturer; the potential
uses identified by the manufacturer in the PMN; and the chemical
identity.
I. 46 Premanufacture Notices Received From: 10/02/06 to 11/12/06
--------------------------------------------------------------------------------------------------------------------------------------------------------
Projected Notice End
Case No. Received Date Date Manufacturer/Importer Use Chemical
--------------------------------------------------------------------------------------------------------------------------------------------------------
P-07-0041 10/17/06 01/14/07 Piedmont Chemical (S) Binder resin for (S) 1,3-
Industries I, LLC polyester fabric benzenedicarboxylic
knit and nonwoven; acid, polymer with
binder resin for 1,4-
mattress ticking benzenedicarboxylic
polyester/ acid, 1,3-dihydro-
polypropylene knit; 1,3-dioxo-5-
binder resin for isobenzofurancarboxy
nylon strapping lic acid, 2,2'-
oxybis[ethanol] and
1,3-propanediol
P-07-0042 10/17/06 01/14/07 Piedmont Chemical (S) Binder resin for (S) 1,3-
Industries I, LLC polyester fabric benzenedicarboxylic
knit and nonwoven; acid, polymer with
binder resin for 1,4-
mattress ticking benzenedicarboxylic
polyester/ acid, 1,3-dihydro-
polypropylene knit; 1,3-dioxo-5-
binder resin for isobenzofurancarboxy
nylon strapping lic acid, dimethyl
1,4-
benzenedicarboxylate
, 1,2-ethanediol and
2,2'-oxybis
[ethanol]
P-07-0043 10/17/06 01/14/07 Piedmont Chemical (S) Binder resin for (S) 1,3-
Industries I, LLC polyester fabric benzenedicarboxylic
knit and nonwoven; acid, polymer with
binder resin for 1,4-
mattress ticking benzenedicarboxylic
polyester/ acid, 1,4-
polypropylene knit; butanediol,1,3-
binder resin for dihydro-1,3-dioxo-5-
nylon strapping isobenzofurancarboxy
lic acid, dimethyl
1,4-
benzenedicarboxylate
and 2,2'-
oxybis[ethanol]
P-07-0044 10/17/06 01/14/07 Piedmont chemical (S) Binder resin for (S) 2,6-
industries I, LLC polyester fabric naphthalenedicarboxy
knit and nonwoven; lic acid, dimethyl
binder resin for ester, polymer with
mattress ticking 1,3-
polyester/ benzenedicarboxylic
polypropylene knit; acid, 1,4-
binder resin for benzenedicarboxylic
nylon strapping acid, 1,3-dihydro-
1,3-dioxo-5-
isobenzofurancarboxy
lic acid, 1,2-
ethanediol and 2,2'-
oxybis [ethanol]
P-07-0045 10/17/06 01/14/07 CBI (G) Open non (G) Polyacrylate
dispersive (binder resin
material)
P-07-0046 10/18/06 01/15/07 International flavors (S) Raw material for (S) 4h-indeno[4,5-d]-
and fragrances, Inc. use in fragrances 1,3-dioxole,
for soaps, 3a,5,6,7,8,8b-
detergents, cleaners hexahydro-
and other household 2,2,6,6,7,8,8-
products heptamethyl-
P-07-0047 10/17/06 01/14/07 CBI (G) Textile colorant (G) Di-substituted
acetanilide
P-07-0048 10/17/06 01/14/07 Dupont Company (G) Raw material for (G) Salt of amine
polymer production with aliphatic acid
P-07-0049 10/17/06 01/14/07 Dupont Company (G) Extrusion (G) Aliphatic
compounding resin; polyamide
molding resin
P-07-0050 10/17/06 01/14/07 CBI (G) Open non- (G) Polyester
dispersive polyurethane resin
polyurethane resin based on 1,5-
naphthylene
diisocyanate
P-07-0051 10/18/06 01/15/07 CBI (G) Metal working (G) Polyethylene
fluid glycol ether acid
P-07-0052 10/18/06 01/15/07 Huntsman (S) Exhaust (G) Benzenesulfonic
International, LLC application to acid azo
cotton fabrics benzenesulfonic acid
azo substituted
naphthalenesulfonic
acid amino
substituted triazine
amino substituted
phenyl sulfonyl
compound
P-07-0053 10/18/06 01/15/07 CBI (S) Flavor (G) Oils, watermelon,
ingredient; citrullus lanatus
fragrance
ingredient; cosmetic
ingredient
P-07-0054 10/19/06 01/16/07 Henkel Corporation (S) A component of (S) Hexanedioic acid,
adhesive polymer with 1,3-
formulations diisocyanatomethylbe
nzene and 3-methyl-
1,5-pentanediol,
propylene gylcol
monomethacrylate-
blocked
[[Page 75549]]
P-07-0055 10/20/06 01/17/07 CBI (G) Additive, open, (G) 2-
non-dispersive use (dimethylamino)ethyl
methyl-2-propanoate,
polymer with alkyl-
substituted methyl-2-
propanoate and aryl-
substituted methyl-2-
propanoate, salt
with mono(alkyl-
substituted
polyalkoxyether)buta
nedioates and alkyl-
substituted
polyalkoxyether
phosphate
P-07-0056 10/23/06 01/20/07 CIBA Specialty (S) High molecular (G) Modified
Chemicals weight pigment polyacrylate block
Corporation dispersant for polymer
waterborne coatings
P-07-0057 10/23/06 01/20/07 Mane, USA (G) Perfumery (G) Alkyl substituted
ingredient tetrahydro pyran
P-07-0058 10/23/06 01/20/07 Firmenich Inc. (S) Aroma for use in (S) 3-hexene, 1-(2-
fragrance mixtures, butenyloxy)-, (3z)-
which in turn are
used in perfumes,
soaps, cleansers,
etc.
P-07-0059 10/25/06 01/22/07 CBI (G) Automotive (G) Cyclic acrylic
coatings polymer, peroxide
initiated
P-07-0060 10/27/06 01/24/07 3M (G) Monomer (G) Aliphatic
acrylate
P-07-0061 10/27/06 01/24/07 3M (G) Adhesive (G) Acrylate
copolymer
P-07-0062 10/27/06 01/24/07 CBI (G) Raw material (G) Amine salt of
carbomonocyclic
acids
P-07-0063 10/27/06 01/24/07 CBI (G) Coating component (G) Polymer of
styrene, acrylic
acid derivatives and
alkyl methacrylate
P-07-0064 10/30/06 01/27/07 CBI (S) Resin for (G) Modified rosin,
printing ink hydrocarbon resin
P-07-0065 10/30/06 01/27/07 CBI (G) Moisture curing (G) Isocyanate
polyurethane terminated urethane
adhesives polymer
P-07-0066 10/30/06 01/27/07 PPG Industries, Inc. (G) Component of an (G) Trimellitic
automotive primer anhydride, polymer
with alkanediol,
dihydroxyalkane
diglycidyl ether di-
3,5,5-
trimethylhexanoate
homopolymer,
ethoxylated
bis(hydroxysubstitut
ed) alkane and
heteromonocycledione
, compound with 2-
(dimethylamino)
ethanol
P-07-0067 10/30/06 01/27/07 CBI (G) Sodium salt of (G) Sodium salt of an
acrylic copolymer acrylic copolymer
P-07-0068 10/30/06 01/27/07 CBI (G) Open non- (G) Polyester resin
dispersive (coatings
application)
P-07-0069 10/25/06 01/22/07 The Dow Chemical (G) Binders for (G) Mdi and polymeric
Company granulated rubber mdi prepolymer
surfacing and
molding
P-07-0070 10/25/06 01/22/07 The Dow Chemical (G) Binders for (G) Mdi and polymeric
Company granulated rubber mdi prepolymer
surfacing and
molding
P-07-0071 10/25/06 01/22/07 The Dow Chemical (G) Binders for (G) Mdi and polymeric
Company granulated rubber mdi prepolymer
surfacing and
molding
P-07-0072 10/30/06 01/27/07 CBI (S) Catalyst for (G) Alkanoic acid
production of foam potassium salt
P-07-0073 10/30/06 01/27/07 CBI (G) Ingredient (G) Acrylic resin
material in paint solution
formulation
P-07-0074 11/02/06 01/30/07 CBI (S) Reactive diluent (G) Alkoxylated
in ultra violet pentaerythritol
formulations acrylate
P-07-0075 11/02/06 01/30/07 CBI (G) Additive for (G) Acrylic polymer
paper manufacturing with vinyl compound,
salt
P-07-0076 11/02/06 01/30/07 CBI (G) Component of (G) Benzene, 1,1'-
manufactured [1,2-
consumer article- ethanediylbis(oxy)bi
contained use s[polymethyl-
P-07-0077 11/03/06 01/31/07 CBI (G) Raw material for (G) Copolymer of
food packaging alkene-alkenyl
container
P-07-0078 11/03/06 01/31/07 CBI (G) Additive for (G) Acrylic polymer
paper manufacturing salt with vinyl
compound, salts
P-07-0079 11/03/06 01/31/07 CBI (S) Light stabilizer (G) Substituted
for plastic articles piperidinol,
carbonate
P-07-0080 11/08/06 02/05/07 Cognis Corporation (S) Biodegradable (S) Nonanedioic acid,
hydraulic fluid for bis(2-hexyldecyl)
use in construction ester
equipment ie.,
bullldozers, cranes
etc.
P-07-0081 11/08/06 02/05/07 Cognis Corporation (S) Biodegradable (S) Nonanedioic acid,
hydraulic fluid for bis(2-octyldodecyl)
use in construction ester
equipment ie., bull
dozers, cranes etc.
P-07-0082 11/08/06 02/05/07 Cognis Corporation (S) Biodegradable (S) Decanedioic acid,
hydraulic fluid for bis(2-hexyldecyl)
use in construction ester
equipment ie.,
bullldozers, cranes
etc.
[[Page 75550]]
P-07-0083 11/08/06 02/05/07 Cognis Corporation (S) Biodegradable (S) Decanedioic acid,
hydraulic fluid for bis(2-octyldodecyl)
use in construction ester
equipment ie.,
bullldozers, cranes
etc.
P-07-0084 11/09/06 02/06/07 CBI (G) Open, non- (G) Polyester polyol
dispersive use
P-07-0085 11/09/06 02/06/07 Cytec Surface (G) Coatings resin (G) Acrylated
Specialties Inc. aliphatic
polyurethane
P-07-0086 11/09/06 02/06/07 CBI (G) Open, non- (G) Water
dispersive use disperisible
polyurethane
--------------------------------------------------------------------------------------------------------------------------------------------------------
In Table II of this unit, EPA provides the following information
(to the extent that such information is not claimed as CBI) on the TMEs
received:
II. 1 Test Marketing Exemption Notices Received From: 10/02/06 to 11/12/06
--------------------------------------------------------------------------------------------------------------------------------------------------------
Projected Notice End
Case No. Received Date Date Manufacturer/Importer Use Chemical
--------------------------------------------------------------------------------------------------------------------------------------------------------
T-07-0001 11/09/06 12/23/06 Cytec Surface (G) Coating resin (G) Acrylated
Specialties Inc. aliphatic
polyurethane
--------------------------------------------------------------------------------------------------------------------------------------------------------
In Table III of this unit, EPA provides the following information
(to the extent that such information is not claimed as CBI) on the
Notices of Commencement to manufacture received:
III. 57 Notices of Commencement From: 10/02/06 to 11/12/00
----------------------------------------------------------------------------------------------------------------
Commencement Notice
Case No. Received Date End Date Chemical
----------------------------------------------------------------------------------------------------------------
P-05-0484 04/07/06 03/09/06 (G) Polyoxyethylene
polyxoxypropylene
polymer, reaction with
cyclohexylmethane
diisocyanate and
polyoxyphenyl derivative
P-05-0551 04/07/06 03/09/06 (G) Polyalkylene glycol
alkyl ether, reaction
products with allyl
glycidyl ether
P-05-0694 04/07/06 03/09/06 (G) Polyalkylene glycol
aryl ether, reaction
products with
formaldehyde
P-06-0092 04/07/06 03/09/06 (G) Oxirane,methyl-,
polymer with oxirane,
fatty acid alkyl ethers
J-05-0001 10/03/06 08/14/06 (G) Trichoderma reesei
3236
J-05-0002 10/03/06 08/24/06 (G) Trichoderma reesei
3243
J-06-0001 10/03/06 08/11/06 (G) Trichoderma reesei
3260
P-01-0084 10/10/06 09/27/06 (G) 1,2,4,5-
benzenetetracarboxylic
acid, tetrakis esters
with monohydric alcohols
P-01-0170 10/05/06 09/12/06 (S) Acetic acid, [(5-
chloro-8-quinolinyl)oxy-
], 1-methylhexyl ester
P-03-0273 10/12/06 09/25/06 (G) Acrylic polymer
P-03-0664 10/02/06 09/20/06 (G) Urethane acrylate
resin
P-05-0740 10/02/06 09/13/06 (G) Peroxyalkanoic acid
P-05-0742 10/02/06 08/30/06 (G) Peroxyalkanoic acid
P-05-0743 10/02/06 08/30/06 (G) Peroxyalkanoic acid
P-05-0744 10/02/06 08/30/06 (G) Peroxyalkanoic acid
P-05-0745 10/02/06 08/30/06 (G) Peroxyalkanoic acid
P-06-0039 10/04/06 09/28/06 (G) Aqueous polyurethane
dispersion
P-06-0131 10/02/06 09/13/06 (S) Siloxanes and
silicones, hydroxy me, 3-
hydroxypropyl me, me (1-
oxooctyl)oxy, esters with
C12-20 fatty acids,
ethers with polyethylene-
polypropylene glycol mono-
bu ether
P-06-0172 10/02/06 09/08/06 (G) Fatty acid polymer
with aliphatic diol and
aromatic diacid
P-06-0317 10/11/06 09/26/06 (G) Polycarbonate
polyurethane
P-06-0318 10/11/06 09/26/06 (G) Polycarbonate
polyurethane resin
P-06-0320 10/11/06 09/26/06 (G) Polyurethane
dispersion
P-06-0386 10/10/06 09/07/06 (S) 1,3-propanediol, 2-
butyl-2-ethyl-, polymers
with methylated
formaldehyde-melamine
polymer
P-06-0552 10/11/06 09/21/06 (S)
Tricyclo[7.3.3.15,11]hept
asiloxane-3,7,14-triol,
1,3,5,7,9,11,14-
heptakis(2-methylpropyl)-
P-06-0626 10/10/06 09/26/06 (G) Isocyanate functional
polyester urethane
polymer
P-02-0922 10/25/06 09/30/06 (G) Urethane acrylate
dispersion
P-03-0847 10/31/06 10/25/06 (G) 14-carbon keto-alkyne
P-04-0920 10/17/06 09/21/06 (G) Alkaryl sulfonic acid,
metal salts
P-04-0925 10/17/06 09/15/06 (G) Alkaryl sulfonic acid
P-04-0926 10/17/06 09/15/06 (G) Alkaryl sulfonic acid
P-04-0930 10/16/06 09/10/06 (G) Toluene alkylate
P-04-0931 10/16/06 09/10/06 (G) Toluene alkylate
[[Page 75551]]
P-05-0127 11/02/06 10/20/06 (G) Polymer of
alkanepolyol, fatty acid
derivative, and
disubstituted benzenes
P-05-0557 11/01/06 09/13/06 (G)
Polyetherethersulfonesulf
one block copolymer
P-06-0114 10/20/06 09/21/06 (G) Alkaryl sulfonic acid,
metal salts
P-06-0115 10/20/06 09/21/06 (G) Alkaryl sulfonic acid,
metal salts
P-06-0127 10/25/06 09/18/06 (G) Modified butyl
acrylate
P-06-0167 11/03/06 10/16/06 (G) Substituted benzoic
acid ester
P-06-0223 11/06/06 10/19/06 (G) Heteromonocyclic, 2-
mercapto-5,5-dimethyl-, 2-
oxide
P-06-0238 11/01/06 10/17/06 (S) Fatty acids, C18-
unsatd., dimers,
hydrogenated, polymers
with adipic acid, 1,6-
hexanediol, .alpha.-hydro-
.omega.-hydroxypoly(oxy-
1,4-butanediyl), 3-
hydroxy-2-(hydroxymethyl)-
2-methylpropanoic acid, 5-
isocyanato-1-
(isocyanatomethyl)-1, 3,3-
trimethylcyclohexane, 2-
methyl-1,5-pentanediamine
and 2-oxepanone,
compounds with
triethylamine
P-06-0261 11/02/06 10/05/06 (G) Alkylenediol, dialkyl-
, polymer with
isocyanato(isocyanatoalky
l)trialkylcycloalkane,
dipentaerythritol
acrylate- and
pentaerythritol acrylate-
blocked, homopolymer
P-06-0283 11/03/06 10/30/06 (G) Fatty acids, polymers
with alkanoic acid, and
epoxy resin
P-06-0284 11/03/06 10/30/06 (G) Fatty acids, polymers
with alkanoic acid and
alkoxylated polyols
P-06-0289 10/24/06 10/14/06 (G) Polyurethane urea
P-06-0313 11/03/06 10/30/06 (G) Alkenoic acid modified
vinylic copolymer
P-06-0346 10/16/06 10/03/06 (G) Urethane modified
polyamide
P-06-0510 10/16/06 10/03/06 (G) Polyether modified
polydimethylsiloxane
P-06-0511 10/16/06 10/03/06 (G) Polyether modified
polydimethylsiloxane
P-06-0540 10/30/06 10/14/06 (G) Aliphatic polyester -
polyether polyurethane
dispersion
P-06-0548 11/06/06 10/13/06 (G) Substituted
trihalomethylpyridine
P-06-0590 10/26/06 10/15/06 (G) Polyester polyol
P-06-0593 10/17/06 10/10/06 (G) Aliphatic isocyanate
resin
P-06-0599 11/03/06 10/27/06 (G) Pmn substance b)
aromatic substituted bis-
dihydropyrrole monosodium
salt; pmn substance c)
aromatic substituted bis-
dihydropyrrole disodium
salt
P-06-0602 10/23/06 09/22/06 (G) Silicone modified
acrylic polymer
P-06-0612 11/06/06 10/29/06 (G) Substituted
carbohydrate
P-06-0644 10/17/06 10/05/06 (S) Magnesium,
bromo(pentafluorophenyl)-
P-95-1404 10/30/06 10/14/06 (G) Unsaturated polyester
resin
----------------------------------------------------------------------------------------------------------------
List of Subjects
Environmental protection, Chemicals, Premanufacturer notices.
Dated: December 7, 2006.
Bernice Mudd,
Acting Director, Information Management Division, Office of Pollution
Prevention and Toxics.
[FR Doc. E6-21428 Filed 12-14-06; 8:45 am]
BILLING CODE 6560-50-S
