Certain New Chemicals; Receipt and Status Information, 75541-75546 [E6-21425]
Download as PDF
<![CDATA[
Federal Register / Vol. 71, No. 241 / Friday, December 15, 2006 / Notices
Phosphate Reserve in an
Economically Viable Fashion,
Beaufort County, NC, Comment
Period Ends: 01/27/2007, Contact:
Tom Walker 838–271–7980 Ext 222.
Revision of FR Notice Published 10/
20/2006; Comment Period Extended
from 12/06/2006 to 01/27/2007.
EIS No. 20060449, Draft EIS, AFS, ID,
Salmon-Challis National Forest, Lost
River/Lemhi Grazing Allotments, To
Improve Range Condition and Trend,
Lost River and Challis Ranger
Districts, Salmon-Challis National
Forest, Butte, Clark, Custer and Lemhi
Counties, ID, Comment Period Ends:
02/02/2007, Contact: Karry Krieger
208–756–5102.
Revision to FR Notice Published 11/
03/2006: Extending Comment Period
from 12/18/2006 to 02/02/2007.
Dated: December 11, 2006.
Robert W. Hargrove,
Director, NEPA Compliance Division, Office
of Federal Activities.
[FR Doc. E6–21406 Filed 12–14–06; 8:45 am]
BILLING CODE 6560–50–P
ENVIRONMENTAL PROTECTION
AGENCY
[EPA–HQ–OPPT–2006–0966; FRL–8106–6
Certain New Chemicals; Receipt and
Status Information
Environmental Protection
Agency (EPA).
ACTION: Notice.
mstockstill on PROD1PC61 with NOTICES
AGENCY:
SUMMARY: Section 5 of the Toxic
Substances Control Act (TSCA) requires
any person who intends to manufacture
(defined by statute to include import) a
new chemical (i.e., a chemical not on
the TSCA Inventory) to notify EPA and
comply with the statutory provisions
pertaining to the manufacture of new
chemicals. Under sections 5(d)(2) and
5(d)(3) of TSCA, EPA is required to
publish a notice of receipt of a
premanufacture notice (PMN) or an
application for a test marketing
exemption (TME), and to publish
periodic status reports on the chemicals
under review and the receipt of notices
of commencement to manufacture those
chemicals. This status report, which
covers the period from September 18,
2006 to October 13, 2006, consists of the
PMNs and TMEs, both pending or
expired, and the notices of
commencement to manufacture a new
chemical that the Agency has received
under TSCA section 5 during this time
period.
DATES: Comments identified by the
specific PMN number or TME number,
VerDate Aug<31>2005
15:47 Dec 14, 2006
Jkt 211001
must be received on or before January
16, 2007.
ADDRESSES: Submit your comments,
identified by docket identification (ID)
no. EPA–HQ–OPPT–2006–0966, by one
of the following methods.
• Federal eRulemaking Portal: https://
www.regulations.gov. Follow the on-line
instructions for submitting comments.
• Mail: Document Control Office
(7407M), Office of Pollution Prevention
and Toxics (OPPT), Environmental
Protection Agency, 1200 Pennsylvania
Ave., NW., Washington, DC 20460-0001.
• Hand Delivery: OPPT Document
Control Office (DCO, EPA East Bldg.,
Rm. 6428, 1201 Constitution Ave., NW.,
Washington, DC. Attention: Docket ID
number EPA–HQ–OPPT–2006–[insert
Docket ID no.]. The DCO is open from
8 a.m. to 4 p.m., Monday through
Friday, excluding legal holidays. The
telephone number for the DCO is (202)
564-8930. Such deliveries are only
accepted during the Docket’s normal
hours of operation, and special
arrangements should be made for
deliveries of boxed information.
Instructions: Direct your comments to
docket ID number EPA–HQ–OPPT–
2006–0966;. EPA’s policy is that all
comments received will be included in
the public docket without change and
may be made available online at https://
www.regulations.gov, including any
personal information provided, unless
the comment includes information
claimed to be Confidential Business
Information (CBI) or other information
whose disclosure is restricted by statute.
Do not submit information that you
consider to be CBI or otherwise
protected through regulations.gov or email. The regulations.gov website is an
‘‘anonymous access’’ systems, which
means EPA will not know your identity
or contact information unless you
provide it in the body of your comment.
If you send an e-mail comment directly
to EPA without going through
regulations.gov your e-mail address will
be automatically captured and included
as part of the comment that is placed in
the public docket and made available on
the Internet. If you submit an electronic
comment, EPA recommends that you
include your name and other contact
information in the body of your
comment and with any disk or CD ROM
you submit. If EPA cannot read your
comment due to technical difficulties
and cannot contact you for clarification,
EPA may not be able to consider your
comment. Electronic files should avoid
the use of special characters, any form
of encryption, and be free of any defects
or viruses.
Docket: All documents in the docket
are listed in the regulations.gov index.
PO 00000
Frm 00067
Fmt 4703
Sfmt 4703
75541
Although listed in the index, some
information is not publicly available,
e.g., CBI or other information whose
disclosure is restricted by statute.
Certain other material, such as
copyrighted material, will be publicly
available only in hard copy. Publicly
available docket materials are available
electronically at https://
www.regulations.gov, or, if only
available in hard copy, at the OPPT
Docket, EPA Docket Center (EPA/DC).
The EPA/DC suffered structural damage
due to flooding in June 2006. Although
the EPA/DC is continuing operations,
there will be temporary changes to the
EPA/DC during the clean-up. The EPA/
DC Public Reading Room, which was
temporarily closed due to flooding, has
been relocated in the EPA Headquarters
Library, Infoterra Room (Room Number
3334) in the EPA West Building, located
at 1301 Constitution Ave., NW.,
Washington, DC. The EPA/DC Public
Reading Room is open from 8:30 a.m. to
4:30 p.m., Monday through Friday,
excluding legal holidays. The telephone
number of the EPA/DC Public Reading
Room is (202) 566–1744, and the
telephone number for the OPPT Docket
is (202) 566–0280. EPA visitors are
required to show photographic
identification and sign the EPA visitor
log. Visitors to the EPA/DC Public
Reading Room will be provided with an
EPA/DC badge that must be visible at all
times while in the EPA Building and
returned to the guard upon departure. In
addition, security personnel will escort
visitors to and from the new EPA/DC
Public Reading Room location. Up-todate information about the EPA/DC is
on the EPA web site at https://
www.epa.gov/epahome/dockets.htm.
FOR FURTHER INFORMATION CONTACT:
Colby Lintner, Regulatory Coordinator,
Environmental Assistance Division,
Office of Pollution Prevention and
Toxics (7408M), Environmental
Protection Agency, 1200 Pennsylvania
Ave., NW., Washington, DC 20460–
0001; telephone number: (202) 554–
1404; e-mail address: TSCAHotline@epa.gov.
SUPPLEMENTARY INFORMATION:
I. General Information
A. Does this Action Apply to Me?
This action is directed to the public
in general. As such, the Agency has not
attempted to describe the specific
entities that this action may apply to.
Although others may be affected, this
action applies directly to the submitter
of the premanufacture notices addressed
in the action. If you have any questions
regarding the applicability of this action
to a particular entity, consult the person
E:\FR\FM\15DEN1.SGM
15DEN1
75542
Federal Register / Vol. 71, No. 241 / Friday, December 15, 2006 / Notices
listed under FOR FURTHER INFORMATION
CONTACT.
B. What Should I Consider as I Prepare
My Comments for EPA?
1. Submitting CBI. Do not submit this
information to EPA through
regulations.gov or e-mail. Clearly mark
the part or all of the information that
you claim to be CBI. For CBI
information in a disk or CD ROM that
you mail to EPA, mark the outside of the
disk or CD ROM as CBI and then
identify electronically within the disk or
CD ROM the specific information that is
claimed CBI). In addition to one
complete version of the comment that
includes information claimed as CBI, a
copy of the comment that does not
contain the information claimed as CBI
must be submitted for inclusion in the
public docket. Information so marked
will not be disclosed except in
accordance with procedures set forth in
40 CFR part 2.
2. Tips for preparing your comments.
When submitting comments, remember
to:
i. Identify the document by docket
number and other identifying
information (subject heading, Federal
Register date and page number).
ii. Follow directions - The agency may
ask you to respond to specific questions
or organize comments by referencing a
Code of Federal Regulations (CFR) part
or section number.
iii. Explain why you agree or disagree;
suggest alternatives and substitute
language for your requested changes.
iv. Describe any assumptions and
provide any technical information and/
or data that you used.
v. If you estimate potential costs or
burdens, explain how you arrived at the
estimate.
vi. Provide specific examples to
illustrate your concerns, and suggested
alternatives.
vii. Explain your views as clearly as
possible, avoiding the use of profanity
or personal threats.
viii. Make sure to submit your
comments by the comment period
deadline identified.
II. Why is EPA Taking this Action?
Section 5 of TSCA requires any
person who intends to manufacture
(defined by statute to include import) a
new chemical (i.e., a chemical not on
the TSCA Inventory to notify EPA and
comply with the statutory provisions
pertaining to the manufacture of new
chemicals. Under sections 5(d)(2) and
5(d)(3) of TSCA, EPA is required to
publish a notice of receipt of a PMN or
an application for a TME and to publish
periodic status reports on the chemicals
under review and the receipt of notices
of commencement to manufacture those
chemicals. This status report, which
covers the period from September 18,
2006 to October 13, 2006, consists of the
PMNs and TMEs, both pending or
expired, and the notices of
commencement to manufacture a new
chemical that the Agency has received
under TSCA section 5 during this time
period.
III. Receipt and Status Report for PMNs
This status report identifies the PMNs
and TMEs, both pending or expired, and
the notices of commencement to
manufacture a new chemical that the
Agency has received under TSCA
section 5 during this time period. If you
are interested in information that is not
included in the following tables, you
may contact EPA as described in Unit II.
to access additional non-CBI
information that may be available.
In Table I of this unit, EPA provides
the following information (to the extent
that such information is not claimed as
CBI) on the PMNs received by EPA
during this period: the EPA case number
assigned to the PMN; the date the PMN
was received by EPA; the projected end
date for EPA’s review of the PMN; the
submitting manufacturer; the potential
uses identified by the manufacturer in
the PMN; and the chemical identity.
I. 75 PREMANUFACTURE NOTICES RECEIVED FROM: 09/18/06 TO 10/13/06
Case No.
Received
Date
Projected
Notice
End Date
Manufacturer/Importer
Use
Chemical
(G) Mining chemical reagent
(S) Flow enhancer and fines migration reduction of post slick water
jobs (enhanced oil recovery); flow
enhancer and fines migration reduction of post fracturing jobs (enhanced oil recovery); formation
treatment of post stimulation jobs
(enhanced oil recovery)
(G) Textile colorant
(G) Modified thiocarbamate
(G) Phosphate ester alkyl pyridine
salt
09/18/06
09/18/06
12/16/06
12/16/06
Cytec Industries Inc.
Clearwater International LLC d/b/a
Weatherford Engineered Chemistry
P–06–0807
09/19/06
12/17/06
CBI
P–06–0808
09/18/06
12/16/06
Xerox Corporation
P–06–0809
P–06–0810
09/20/06
09/20/06
12/18/06
12/18/06
CBI
Nation Ford Chemical
Company
P–06–0811
09/20/06
12/18/06
CBI
P–06–0812
09/20/06
12/18/06
CBI
(S) Monomer for the synthesis of specialty polymer
(G) Surface treatment agent
P–06–0813
mstockstill on PROD1PC61 with NOTICES
P–06–0805
P–06–0806
09/19/06
12/17/06
CBI
(G) Additive for pigment dispersion
P–06–0814
09/19/06
12/17/06
CBI
(G) Additive for pigment dispersion
VerDate Aug<31>2005
15:47 Dec 14, 2006
Jkt 211001
PO 00000
Frm 00068
(G) Open, non-dispersive use as a
constituent in solid, crayon like inks
for computer printers
(G) Radiation cured coating
(S) Destructive use as chemical intermediate
Fmt 4703
Sfmt 4703
E:\FR\FM\15DEN1.SGM
(G)
Substituted
phenylazo
naphthalenesulfonic acid
(G) Polyamide resin
(G) Amine modified acrylic ester
(S) 2,5-cyclohexadiene-1,4-dione, 2,5dichloro-3,6-bis[(9-ethyl-9hcarbazol-3-yl)amino](G) Substituted bicyclic olefin
(G)
Fluoropolyether
derivative
fluoronated polyurethane resin
(G)
Poly
(oxyalkanediyl)
,.alpha.,.alpha,′carbomonocycledicarbonyl
bis
(.omega.-alkyloxy-)
(G)
Poly
(oxyalkanediyl)
,
.alpha.,.alpha,′.alpha.′′carbomonocycletricarbonyl
tris
(.omega.-alkyloxy-)
15DEN1
75543
Federal Register / Vol. 71, No. 241 / Friday, December 15, 2006 / Notices
I. 75 PREMANUFACTURE NOTICES RECEIVED FROM: 09/18/06 TO 10/13/06—Continued
Case No.
Received
Date
Projected
Notice
End Date
Manufacturer/Importer
Use
09/19/06
12/17/06
Nyco Minerals, Inc.
(S) Filter for thermoplastic resins
P–06–0816
09/21/06
12/19/06
CBI
(G) Hydrophobic surface active agent
for cellulosic substrates and similar
materials
P–06–0817
09/22/06
12/20/06
CBI
(S) Fluorescent brightener for use in
cellulosic paper applications
P–06–0818
09/22/06
12/20/06
CBI
(G) Polymer for injection molding and
extrusion
P–06–0819
09/22/06
12/20/06
CBI
(G) Polymer for injection molding and
extrusion
P–06–0820
09/22/06
12/20/06
CBI
P–06–0821
09/22/06
12/20/06
CBI
P–06–0822
P–06–0823
09/22/06
09/25/06
12/20/06
12/23/06
CBI
CBI
(G) Contained use in energy production
(S) Reactive diluent in ultra violet formulations
(G) Acrylic binder
(S) Aqueous dispersion of polymer for
leather finishing
P–06–0824
09/25/06
12/23/06
CBI
(S) Aqueous dispersion of polymer for
leather finishing
P–06–0825
09/25/06
12/23/06
CBI
(S) Aqueous dispersion of polymer for
leather finishing
P–06–0826
P–06–0827
09/25/06
09/26/06
12/23/06
12/24/06
CBI
CBI
(G) Stabilizer for emulsion polymers
(G) Fuel additive
P–06–0828
09/27/06
12/25/06
CBI
P–06–0829
09/27/06
12/25/06
09/27/06
12/25/06
P–06–0831
09/27/06
12/25/06
P–06–0832
09/27/06
12/25/06
P–06–0833
09/27/06
12/25/06
P–06–0834
09/27/06
12/25/06
P–06–0835
09/28/06
12/26/06
Archer Daniels Midland Company
Archer Daniels Midland Company
Archer Daniels Midland Company
Archer Daniels Midland Company
Archer Daniels Midland Company
Archer Daniels Midland Company
CBI
(G) Dispersive use in cooling water
treatment
(G) Petrochemical replacement
P–06–0830
mstockstill on PROD1PC61 with NOTICES
P–06–0815
P–06–0836
09/28/06
12/26/06
CBI
VerDate Aug<31>2005
15:47 Dec 14, 2006
Jkt 211001
PO 00000
Frm 00069
Chemical
(S)
1,2-ethanediamine,
N-[3(trimethoxysilyl)propyl]-, hydrolysis
products with wollastonite (ca(si03))
(G) Modified reaction products of alkyl
alcohol, halogenated alkane, substituted epoxide, and amino compound
(G) Substituted benzene sulfonic acid,
salt
reaction
product
with
phenylamine and amino alcohol
and substituted propaneamide compounds with amino alcohol
(G) Benzoic acid, 2,2′-[substituted]bis, dimethyl ester, polymer with 1,4benzenediol, (substituted) 1,4-benzenediol
and
4,4′-(1-substituted)bis[phenol]
(G) Benzoic acid, 2,2′-[substituted]bis, dimethyl ester, polymer with 1,4benzenediol, and 4,4′ (substituted)
bis[phenol]
(G) Trisubstituted triazine
(G) Alkoxylated pentaerythritol acrylate
(G) Acrylic copolymer
(G) Alkanedioic acid, polymer with
alkanediol, carbocycledicarboxylic
acid,
carbocycle-isocyanato(isocyanatoalkyl)-trialkyl-,
carbocycle alkylenebis[isocyanato-,
alkanoic
acid,
hydroxy(hydroxyalkyl)-alkyl-, trialkylamine,
and 1,2-alkyldiamine
(G) 2-propenoic acid, polymer with
cyanoalkene, alkenoic acid alkyl
ester,
alkylalkenamide,
methylolmethacrylamide, and an alkenyl benzene
(G) Oxepanone, polymer with dialkylalkanediol,
alkyl-(hydroxyaalkyl)alkanediol, carbocycle, isocyanato(isocyanatoalkyll)-trialkyl-, alkanoic
acid, hydroxy-(hydroxyalkyl)-alkyl-,
alkylamine,
N,N-dialkyl-,
aminoalkyl-trialkylcarbocyclicamine,
and alkyldiamine
(G) Seed-oil based surfactant
(G)
Heterocycle
amine,
Nheterocycle, monoammonium salt
(G) Polyacrylate terpolymer salt
(S) Fatty acids, canola-oil, me esters
(G) Petrochemical replacement
(S) Fatty acids, rape-oil, me esters
(G) Petrochemical replacement
(S) Fatty acids, corn-oil, me esters
(G) Petrochemical replacement
(S) Fatty acids, palm-oil, me esters
(G) Petrochemical replacement
(S) Fatty acids, peanut-oil, me esters
(G) Petrochemical replacement
(S) Fatty acids, linseed-oil, me esters
(G) Additive, open, non-dispersive
use
(G) Additive, open, non-dispersive
use
(G) Polyester urethane copolymer
Fmt 4703
Sfmt 4703
E:\FR\FM\15DEN1.SGM
(G) Polyester urethane copolymer
15DEN1
75544
Federal Register / Vol. 71, No. 241 / Friday, December 15, 2006 / Notices
I. 75 PREMANUFACTURE NOTICES RECEIVED FROM: 09/18/06 TO 10/13/06—Continued
Case No.
Received
Date
Projected
Notice
End Date
Manufacturer/Importer
Use
09/28/06
12/26/06
CBI
P–06–0838
09/28/06
12/26/06
CBI
P–06–0839
09/29/06
12/27/06
CBI
P–07–0001
P–07–0002
10/02/06
10/03/06
12/30/06
12/31/06
Mane, USA
CBI
P–07–0003
10/03/06
12/31/06
CBI
P–07–0004
10/03/06
12/31/06
CBI
P–07–0005
10/03/06
12/31/06
CBI
P–07–0006
10/03/06
12/31/06
CBI
P–07–0007
10/03/06
12/31/06
CBI
P–07–0008
10/02/06
12/30/06
Ashland Inc., Environmental Health and
Safety
P–07–0009
P–07–0010
10/04/06
10/04/06
01/01/07
01/01/07
CBI
CBI
(S) Polyurethane coating
(G) Additive, open, non-dispersive
use
P–07–0011
P–07–0012
10/04/06
10/04/06
01/01/07
01/01/07
CBI
CBI
P–07–0013
10/05/06
01/02/07
CBI
P–07–0014
10/05/06
01/02/07
CBI
P–07–0015
10/05/06
01/02/07
CBI
(G) Antioxidant
(S) Resin for inks, coatings and adhesives
(G) Thermoplastic resin processing
aid for rubber manufacture
(G) Radiation-curable wood, paper
and metal coatings, such as wood
varnishes, overprint varnishes for
paper, and metal coatings
(S) Reactive dye for cellulosic fibers
P–07–0016
10/06/06
01/03/07
Croda Inc.
(G) Fabric care softening agent
P–07–0017
mstockstill on PROD1PC61 with NOTICES
P–06–0837
10/06/06
01/03/07
CBI
P–07–0018
10/06/06
01/03/07
Ashland Inc., Environmental Health and
Safety
(G) Siloxane parts of this new material have water repellent effect and
hydroxy or alkoxy group of this new
material reacts with surface of
frame retardant materials to make
water repellent coating
(G) Fiberglass reinforced boat hulls
VerDate Aug<31>2005
15:47 Dec 14, 2006
Jkt 211001
PO 00000
Frm 00070
(G) Additive, open, non-dispersive
use
(G) Additive, open, non-dispersive
use
(G) Flame retardants for plastics and
resins
(G) Perfumery ingredient
(G) Film forming aid for paint formulations; film forming aid for ink formulations
(G) Film forming aid for paint formulations; film forming aid for ink formulations
(G) Film forming aid for paint formulations; film forming aid for ink formulations
(G) Film forming aid for paint formulations; film forming aid for ink formulations
(G) Film forming aid for paint formulations; film forming aid for ink formulations
(G) Film forming aid for paint formulations; film forming aid for ink formulations
(G) Adhesive
Fmt 4703
Sfmt 4703
E:\FR\FM\15DEN1.SGM
Chemical
(G) Polyester urethane copolymer
(G) Polyester urethane copolymer
(G) Phenoxyphosphazene oligomer
(G) Cilandrane
(G) Fatty acids, C16–C18 and C18 unsaturated, esters with mixed diols
and triols
(G) Mixed polyol - glycerol fatty acid
ester
(G) Mixed polyol - glycerol fatty acid
ester
(G) Mixed polyol - glycerol fatty acid
ester
(G) Mixed polyol - glycerol fatty acid
ester
(G) Mixed polyol - glycerol fatty acid
ester
(G) Benzene, 1,1′-methylenebis[4isocyanato-, polymer with oxirane,
methyl-, polymer with oxirane, ether
with
1,2-propanediol;
poly[oxy(methyl-1,2-ethanediyl)],
.alpha.,
.alpha.′,.alpha.′′-1,2,3propanetriyltris[.omega.-hydroxy-;
hexanedioic acid, polymer with 2,2dimethyl-1,3-propanediol, 2-ethyl-2(hydroxymethyl)-1,3-propanediol,
1,6-hexanediol
and
2,2′oxybis[ethanol]; hydrocarbons, C9unsaturated., polymers and phenol;
and krasol
(G) Aqueous polyurethane dispersion
(G) Styrene-maleic anhydride copolymer,
reaction
products
with
polyether, salt with alkanolamin
(G) Alkylated phenol
(G) Ethanol capped polyether polyurethane
(G) Alkylphenol novolak modified with
amine and epoxy
(G) Polyester polyurethane acrylate
oligomer
(G) Substituted naphthalenedisulfonic
acid, substituted amino azo]-, sodium salt (same generic name for
both isomers)
(G) Hydrolyzed wheat silicone copolymer
(G) Aminoalkoxysiloxane, acetates
(salts)
(G) 1,3-propanediol, 2,2-dimethyl-,
polymer
with
cycloalkyl
diisocyanate,
2,2-bis[(2propenyloxy)methyl]-1-butanolblocked
15DEN1
75545
Federal Register / Vol. 71, No. 241 / Friday, December 15, 2006 / Notices
I. 75 PREMANUFACTURE NOTICES RECEIVED FROM: 09/18/06 TO 10/13/06—Continued
Case No.
Received
Date
Projected
Notice
End Date
Manufacturer/Importer
Use
10/06/06
01/03/07
Ashland Inc., Environmental Health and
Safety
(G) Fiberglass reinforced boat hulls
P–07–0020
10/06/06
01/03/07
Ashland Inc., Environmental Health and
Safety
(G) Fiberglass reinforced boat hulls
P–07–0021
10/10/06
01/07/07
10/10/06
10/10/06
10/10/06
10/10/06
01/07/07
01/07/07
01/07/07
01/07/07
CIBA Specialty Chemicals Corporation
CBI
CBI
CBI
CBI
(S) Flame retardant for polymers
P–07–0022
P–07–0023
P–07–0024
P–07–0025
P–07–0026
10/10/06
01/07/07
CBI
P–07–0027
10/11/06
01/08/07
CBI
P–07–0028
10/12/06
01/09/07
CBI
(G) Open, non-dispersive (resin)
P–07–0029
10/13/06
01/10/07
CBI
(S) Electrodeposition coating for metallic substrates
P–07–0030
10/13/06
01/10/07
CBI
(S) Electrodeposition coating for metallic substrates
P–07–0031
10/13/06
01/10/07
CBI
(S) Electrodeposition coating for metallic substrates
P–07–0032
10/13/06
01/10/07
CBI
(S) Electrodeposition coating for metallic substrates
P–07–0033
10/13/06
01/10/07
CBI
(S) Electrodeposition coating for metallic substrates
P–07–0034
10/13/06
01/10/07
CBI
(S) Electrodeposition coating for metallic substrates
P–07–0035
P–07–0036
P–07–0037
10/12/06
10/12/06
10/13/06
01/09/07
01/09/07
01/10/07
CBI
CBI
Piedmont Chemical Industries I, LLC
(G) Polymeric binder
(G) Polymeric binder
(S) Binder resin for polyester fabric
knit and nonwoven; binder resin for
mattress ticking polyester/polypropylene knit; binder resin for
nylon strapping
P–07–0038
10/13/06
01/10/07
Piedmont Chemical Industries I, LLC
(S) Binder resin for polyester fabric
knit and nonwoven; binder resin for
mattress ticking polyester/polypropylene knit; binder resin for
nylon strapping
P–07–0039
mstockstill on PROD1PC61 with NOTICES
P–07–0019
10/13/06
01/10/07
Piedmont Chemical Industries I, LLC
(S) Binder resin for polyester fabric
knit and nonwoven; binder resin for
mattress ticking polyester/polypropylene knit; binder resin for
nylon strapping
VerDate Aug<31>2005
15:47 Dec 14, 2006
Jkt 211001
PO 00000
Frm 00071
(S) Polyurethane coating
(S) Polyurethane coating
(S) Emulsifier for oilfield application
(G) Contained use in energy production
(G) Contained use in energy production
(S) A component in ultraviolet -, visible light and electron beam curable
formulations
Fmt 4703
Sfmt 4703
E:\FR\FM\15DEN1.SGM
Chemical
(G) 1,2-ethanediol, polymer with
cycloalkyl diisocyanate, 2,2-bis[(2propenyloxy)methyl]-1-butanolblocked
(G) Poly(oxy-1,2-ethanediyl), .alpha.hydro-.omega.-hydroxy-,
polymer
with cycloalkyl diisocyanate, 2,2′bis[(2-propenyloxy)methyl]-1-butanol-blocked
(G)
Phenol,
2,4-bis(1,1-branched
alkyl)-, phosphate (3:1)
(G) Aqueous polyurethane dispersion
(G) Aqueous polyurethane dispersion
(G) Alkylamine ethoxylated
(G) Alkyl ether trialkyl quaternary ammonium compound
(G) Alkyl ether trialkyl quaternary ammonium compound
(G) Dicarboxylic based acid, polymer
with a dicarboxylate, 2-ethyl-2(hydroxymethyl)-1,3-propanediol
and 2-methyl-1,3-propanediol, 2propenoate
(G) Diphenolmethyl based polymer
resin
(G) Amine functional epoxy based
resin salted with an organic acid
and grafted with anhydride
(G) Amine functional epoxy based
resin salted with an organic acid
and grafted with anhydride
(G) Amine functional epoxy based
resin salted with an organic acid
and grafted with anhydride
(G) Amine functional epoxy based
resin salted with an organic acid
and grafted with anhydride
(G) Amine functional epoxy based
resin salted with an organic acid
and grafted with anhydride
(G) Amine functional epoxy based
resin salted with an organic acid
and grafted with anhydride
(G) Methacrylate copolymer
(G) Methacrylate copolymer
(S) 1,3-benzenedicarboxylic acid,
polymer
with
1,4benzenedicarboxylic
acid,
1,3dihydro-1,3-dioxo-5isobenzofurancarboxylic acid, dimethyl 1,4-benzenedicarboxylate,
1,2-ethanediol
and
2,2′oxybis[ethanol], ammonium salt
(S) 1,3-benzenedicarboxylic acid,
polymer
with
1,4benzenedicarboxylic
acid,
1,3dihydro-1,3-dioxo-5isobenzofurancarboxylic acid, 2,2′oxybis[ethanol]
and
1,3propanediol, ammonium salt
(S) 1,3-benzenedicarboxylic acid,
polymer
with
1,4benzenedicarboxylic
acid,
1,4butanediol, 1,3-dihydro-1,3-dioxo-5isobenzofurancarboxylic acid, dimethyl
1,4-benzenedicarboxylate
and 2,2′-oxybis[ethanol], ammonium salt
15DEN1
75546
Federal Register / Vol. 71, No. 241 / Friday, December 15, 2006 / Notices
I. 75 PREMANUFACTURE NOTICES RECEIVED FROM: 09/18/06 TO 10/13/06—Continued
P–07–0040
10/13/06
Projected
Notice
End Date
Manufacturer/Importer
Use
Chemical
01/10/07
Received
Date
Case No.
Piedmont Chemical Industries I, LLC
(S) Binder resin for polyester fabric
knit and nonwoven; binder resin for
mattress ticking polyester/polypropylene knit; binder resin for
nylon strapping
(S) 2,6-naphthalenedicarboxylic acid,
dimethyl ester, polymer with 1,3benzenedicarboxylic
acid,
1,4benzenedicarboxylic
acid,
1,3dihydro-1,3-dioxo-5isobenzofurancarboxylic acid, 1,2ethanediol and 2,2′-oxybis[ethanol],
ammonium salt
In Table II of this unit, EPA provides
the following information (to the extent
that such information is not claimed as
CBI) on the Notices of Commencement
to manufacture received:
II. 19 NOTICES OF COMMENCEMENT FROM: 09/18/06 TO 10/13/06
Case No.
Commencement
Notice End Date
Received Date
P–03–0837
P–05–0048
P–05–0484
09/21/06
09/18/06
04/07/06
09/07/06
02/28/05
03/09/06
P–05–0551
P–05–0694
P–06–0092
P–06–0176
P–06–0196
P–06–0200
P–06–0272
P–06–0288
P–06–0366
P–06–0448
P–06–0463
P–06–0535
P–06–0539
P–06–0543
P–06–0596
04/07/06
04/07/06
04/07/06
09/25/06
09/26/06
09/21/06
09/27/06
09/27/06
09/18/06
09/18/06
08/17/06
09/21/06
09/19/06
09/19/06
09/15/06
03/09/06
03/09/06
03/09/06
09/05/06
08/01/06
09/12/06
09/05/06
09/18/06
09/08/06
09/07/06
07/29/06
08/22/06
08/22/06
08/22/06
09/07/06
P–06–0606
09/27/06
09/13/06
List of Subjects
Environmental protection, Chemicals,
Premanufacturer notices.
Dated: December 7, 2006.
Bernice Mudd,
Acting Director, Information Management
Division, Office of Pollution Prevention and
Toxics.
[FR Doc. E6–21425 Filed 12–14–06; 8:45 am]
BILLING CODE 6560–50–S
ENVIRONMENTAL PROTECTION
AGENCY
mstockstill on PROD1PC61 with NOTICES
[EPA–HQ–OPPT–2006–0967; FRL–8106–7]
Certain New Chemicals; Receipt and
Status Information
Environmental Protection
Agency (EPA).
ACTION: Notice.
AGENCY:
VerDate Aug<31>2005
15:47 Dec 14, 2006
Jkt 211001
Chemical
(G) Aliphatic polyisocyanate
(G) Phthalocyanine compound
(G)
Polyoxyethylene
polyxoxypropylene
polymer,
reaction
with
cyclohexylmethane diisocyanate and polyoxyphenyl derivative
(G) Polyalkylene glycol alkyl ether, reaction products with allyl glycidyl ether
(G) Polyalkylene glycol aryl ether, reaction products with formaldehyde
(G) Oxirane,methyl-, polymer with oxirane, fatty acid alkyl ethers
(G) Acrylate ester
(G) Tdi prepolymer based on hybrid caprolactone polyol
(G) Hydroxy carboxylic acid amide, N,N-dialkyl derivates
(G) Alkylenedicarboxylic dichloride, polymer with dihydroxybenzene
(G) Hydroxylated diester of a triamine
(G) Isocyanate functional polyester polyether urethane polymer
(G) Fatty acid salt of alkyldiamine
(S) Borate(1-), bis [ethanedioato (2-)- .kappa. 01, .kappa. 02] -lithium, (t-4)(G) Ester urethane
(G) Methyl propylhexanol
(G) Methyl propylhexanol
(S) 1h-indene, 2,3,3a,4,5,7a-hexahydro-1,1,2,3,3-pentamethyl-6-(2-propenyl)2h-indeno[4,5-b]furan, decahydro-2,6,6,7,8,8-hexamethyl(S) 1-propanamine, 3-(triethoxysilyl)-, reaction products with boehmite (al(oh)o)
SUMMARY: Section 5 of the Toxic
Substances Control Act (TSCA) requires
any person who intends to manufacture
(defined by statute to include import) a
new chemical (i.e., a chemical not on
the TSCA Inventory) to notify EPA and
comply with the statutory provisions
pertaining to the manufacture of new
chemicals. Under sections 5(d)(2) and
5(d)(3) of TSCA, EPA is required to
publish a notice of receipt of a
premanufacture notice (PMN) or an
application for a test marketing
exemption (TME), and to publish
periodic status reports on the chemicals
under review and the receipt of notices
of commencement to manufacture those
chemicals. This status report, which
covers the period from October 16, 2006
to November 12, 2006, consists of the
PMNs and TMEs, both pending or
expired, and the notices of
commencement to manufacture a new
PO 00000
Frm 00072
Fmt 4703
Sfmt 4703
chemical that the Agency has received
under TSCA section 5 during this time
period.
DATES: Comments identified by the
specific PMN number or TME number,
must be received on or before January
16, 2007.
ADDRESSES: Submit your comments,
identified by docket identification (ID)
no. EPA–HQ–OPPT–2006–0967, by one
of the following methods.
• Federal eRulemaking Portal: https://
www.regulations.gov. Follow the on-line
instructions for submitting comments.
• Mail: Document Control Office
(7407M), Office of Pollution Prevention
and Toxics (OPPT), Environmental
Protection Agency, 1200 Pennsylvania
Ave., NW., Washington, DC 20460-0001.
• Hand Delivery: OPPT Document
Control Office (DCO, EPA East Bldg.,
Rm. 6428, 1201 Constitution Ave., NW.,
Washington, DC. Attention: Docket ID
E:\FR\FM\15DEN1.SGM
15DEN1
]]>Agencies
[Federal Register Volume 71, Number 241 (Friday, December 15, 2006)]
[Notices]
[Pages 75541-75546]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: E6-21425]
-----------------------------------------------------------------------
ENVIRONMENTAL PROTECTION AGENCY
[EPA-HQ-OPPT-2006-0966; FRL-8106-6
Certain New Chemicals; Receipt and Status Information
AGENCY: Environmental Protection Agency (EPA).
ACTION: Notice.
-----------------------------------------------------------------------
SUMMARY: Section 5 of the Toxic Substances Control Act (TSCA) requires
any person who intends to manufacture (defined by statute to include
import) a new chemical (i.e., a chemical not on the TSCA Inventory) to
notify EPA and comply with the statutory provisions pertaining to the
manufacture of new chemicals. Under sections 5(d)(2) and 5(d)(3) of
TSCA, EPA is required to publish a notice of receipt of a
premanufacture notice (PMN) or an application for a test marketing
exemption (TME), and to publish periodic status reports on the
chemicals under review and the receipt of notices of commencement to
manufacture those chemicals. This status report, which covers the
period from September 18, 2006 to October 13, 2006, consists of the
PMNs and TMEs, both pending or expired, and the notices of commencement
to manufacture a new chemical that the Agency has received under TSCA
section 5 during this time period.
DATES: Comments identified by the specific PMN number or TME number,
must be received on or before January 16, 2007.
ADDRESSES: Submit your comments, identified by docket identification
(ID) no. EPA-HQ-OPPT-2006-0966, by one of the following methods.
Federal eRulemaking Portal: https://www.regulations.gov.
Follow the on-line instructions for submitting comments.
Mail: Document Control Office (7407M), Office of Pollution
Prevention and Toxics (OPPT), Environmental Protection Agency, 1200
Pennsylvania Ave., NW., Washington, DC 20460-0001.
Hand Delivery: OPPT Document Control Office (DCO, EPA East
Bldg., Rm. 6428, 1201 Constitution Ave., NW., Washington, DC.
Attention: Docket ID number EPA-HQ-OPPT-2006-[insert Docket ID no.].
The DCO is open from 8 a.m. to 4 p.m., Monday through Friday, excluding
legal holidays. The telephone number for the DCO is (202) 564-8930.
Such deliveries are only accepted during the Docket's normal hours of
operation, and special arrangements should be made for deliveries of
boxed information.
Instructions: Direct your comments to docket ID number EPA-HQ-OPPT-
2006-0966;. EPA's policy is that all comments received will be included
in the public docket without change and may be made available online at
https://www.regulations.gov, including any personal information
provided, unless the comment includes information claimed to be
Confidential Business Information (CBI) or other information whose
disclosure is restricted by statute. Do not submit information that you
consider to be CBI or otherwise protected through regulations.gov or e-
mail. The regulations.gov website is an ``anonymous access'' systems,
which means EPA will not know your identity or contact information
unless you provide it in the body of your comment. If you send an e-
mail comment directly to EPA without going through regulations.gov your
e-mail address will be automatically captured and included as part of
the comment that is placed in the public docket and made available on
the Internet. If you submit an electronic comment, EPA recommends that
you include your name and other contact information in the body of your
comment and with any disk or CD ROM you submit. If EPA cannot read your
comment due to technical difficulties and cannot contact you for
clarification, EPA may not be able to consider your comment. Electronic
files should avoid the use of special characters, any form of
encryption, and be free of any defects or viruses.
Docket: All documents in the docket are listed in the
regulations.gov index. Although listed in the index, some information
is not publicly available, e.g., CBI or other information whose
disclosure is restricted by statute. Certain other material, such as
copyrighted material, will be publicly available only in hard copy.
Publicly available docket materials are available electronically at
https://www.regulations.gov, or, if only available in hard copy, at the
OPPT Docket, EPA Docket Center (EPA/DC). The EPA/DC suffered structural
damage due to flooding in June 2006. Although the EPA/DC is continuing
operations, there will be temporary changes to the EPA/DC during the
clean-up. The EPA/DC Public Reading Room, which was temporarily closed
due to flooding, has been relocated in the EPA Headquarters Library,
Infoterra Room (Room Number 3334) in the EPA West Building, located at
1301 Constitution Ave., NW., Washington, DC. The EPA/DC Public Reading
Room is open from 8:30 a.m. to 4:30 p.m., Monday through Friday,
excluding legal holidays. The telephone number of the EPA/DC Public
Reading Room is (202) 566-1744, and the telephone number for the OPPT
Docket is (202) 566-0280. EPA visitors are required to show
photographic identification and sign the EPA visitor log. Visitors to
the EPA/DC Public Reading Room will be provided with an EPA/DC badge
that must be visible at all times while in the EPA Building and
returned to the guard upon departure. In addition, security personnel
will escort visitors to and from the new EPA/DC Public Reading Room
location. Up-to-date information about the EPA/DC is on the EPA web
site at https://www.epa.gov/epahome/dockets.htm.
FOR FURTHER INFORMATION CONTACT: Colby Lintner, Regulatory Coordinator,
Environmental Assistance Division, Office of Pollution Prevention and
Toxics (7408M), Environmental Protection Agency, 1200 Pennsylvania
Ave., NW., Washington, DC 20460-0001; telephone number: (202) 554-1404;
e-mail address: TSCA-Hotline@epa.gov.
SUPPLEMENTARY INFORMATION:
I. General Information
A. Does this Action Apply to Me?
This action is directed to the public in general. As such, the
Agency has not attempted to describe the specific entities that this
action may apply to. Although others may be affected, this action
applies directly to the submitter of the premanufacture notices
addressed in the action. If you have any questions regarding the
applicability of this action to a particular entity, consult the person
[[Page 75542]]
listed under FOR FURTHER INFORMATION CONTACT.
B. What Should I Consider as I Prepare My Comments for EPA?
1. Submitting CBI. Do not submit this information to EPA through
regulations.gov or e-mail. Clearly mark the part or all of the
information that you claim to be CBI. For CBI information in a disk or
CD ROM that you mail to EPA, mark the outside of the disk or CD ROM as
CBI and then identify electronically within the disk or CD ROM the
specific information that is claimed CBI). In addition to one complete
version of the comment that includes information claimed as CBI, a copy
of the comment that does not contain the information claimed as CBI
must be submitted for inclusion in the public docket. Information so
marked will not be disclosed except in accordance with procedures set
forth in 40 CFR part 2.
2. Tips for preparing your comments. When submitting comments,
remember to:
i. Identify the document by docket number and other identifying
information (subject heading, Federal Register date and page number).
ii. Follow directions - The agency may ask you to respond to
specific questions or organize comments by referencing a Code of
Federal Regulations (CFR) part or section number.
iii. Explain why you agree or disagree; suggest alternatives and
substitute language for your requested changes.
iv. Describe any assumptions and provide any technical information
and/or data that you used.
v. If you estimate potential costs or burdens, explain how you
arrived at the estimate.
vi. Provide specific examples to illustrate your concerns, and
suggested alternatives.
vii. Explain your views as clearly as possible, avoiding the use of
profanity or personal threats.
viii. Make sure to submit your comments by the comment period
deadline identified.
II. Why is EPA Taking this Action?
Section 5 of TSCA requires any person who intends to manufacture
(defined by statute to include import) a new chemical (i.e., a chemical
not on the TSCA Inventory to notify EPA and comply with the statutory
provisions pertaining to the manufacture of new chemicals. Under
sections 5(d)(2) and 5(d)(3) of TSCA, EPA is required to publish a
notice of receipt of a PMN or an application for a TME and to publish
periodic status reports on the chemicals under review and the receipt
of notices of commencement to manufacture those chemicals. This status
report, which covers the period from September 18, 2006 to October 13,
2006, consists of the PMNs and TMEs, both pending or expired, and the
notices of commencement to manufacture a new chemical that the Agency
has received under TSCA section 5 during this time period.
III. Receipt and Status Report for PMNs
This status report identifies the PMNs and TMEs, both pending or
expired, and the notices of commencement to manufacture a new chemical
that the Agency has received under TSCA section 5 during this time
period. If you are interested in information that is not included in
the following tables, you may contact EPA as described in Unit II. to
access additional non-CBI information that may be available.
In Table I of this unit, EPA provides the following information (to
the extent that such information is not claimed as CBI) on the PMNs
received by EPA during this period: the EPA case number assigned to the
PMN; the date the PMN was received by EPA; the projected end date for
EPA's review of the PMN; the submitting manufacturer; the potential
uses identified by the manufacturer in the PMN; and the chemical
identity.
I. 75 Premanufacture Notices Received From: 09/18/06 to 10/13/06
--------------------------------------------------------------------------------------------------------------------------------------------------------
Projected Notice End
Case No. Received Date Date Manufacturer/Importer Use Chemical
--------------------------------------------------------------------------------------------------------------------------------------------------------
P-06-0805 09/18/06 12/16/06 Cytec Industries Inc. (G) Mining chemical (G) Modified
reagent thiocarbamate
P-06-0806 09/18/06 12/16/06 Clearwater (S) Flow enhancer and (G) Phosphate ester
International LLC d/ fines migration alkyl pyridine salt
b/a Weatherford reduction of post
Engineered Chemistry slick water jobs
(enhanced oil
recovery); flow
enhancer and fines
migration reduction
of post fracturing
jobs (enhanced oil
recovery); formation
treatment of post
stimulation jobs
(enhanced oil
recovery)
P-06-0807 09/19/06 12/17/06 CBI (G) Textile colorant (G) Substituted
phenylazo
naphthalenesulfonic
acid
P-06-0808 09/18/06 12/16/06 Xerox Corporation (G) Open, non- (G) Polyamide resin
dispersive use as a
constituent in
solid, crayon like
inks for computer
printers
P-06-0809 09/20/06 12/18/06 CBI (G) Radiation cured (G) Amine modified
coating acrylic ester
P-06-0810 09/20/06 12/18/06 Nation Ford Chemical (S) Destructive use (S) 2,5-
Company as chemical cyclohexadiene-1,4-
intermediate dione, 2,5-dichloro-
3,6-bis[(9-ethyl-9h-
carbazol-3-yl)amino]-
P-06-0811 09/20/06 12/18/06 CBI (S) Monomer for the (G) Substituted
synthesis of bicyclic olefin
specialty polymer
P-06-0812 09/20/06 12/18/06 CBI (G) Surface treatment (G) Fluoropolyether
agent derivative
fluoronated
polyurethane resin
P-06-0813 09/19/06 12/17/06 CBI (G) Additive for (G) Poly
pigment dispersion (oxyalkanediyl)
,.alpha.,.alpha,'-
carbomonocycledicarb
onyl bis (.omega.-
alkyloxy-)
P-06-0814 09/19/06 12/17/06 CBI (G) Additive for (G) Poly
pigment dispersion (oxyalkanediyl) ,
.alpha.,.alpha,'.alp
ha.''-
carbomonocycletricar
bonyl tris (.omega.-
alkyloxy-)
[[Page 75543]]
P-06-0815 09/19/06 12/17/06 Nyco Minerals, Inc. (S) Filter for (S) 1,2-
thermoplastic resins ethanediamine, N-[3-
(trimethoxysilyl)pro
pyl]-, hydrolysis
products with
wollastonite
(ca(si03))
P-06-0816 09/21/06 12/19/06 CBI (G) Hydrophobic (G) Modified reaction
surface active agent products of alkyl
for cellulosic alcohol, halogenated
substrates and alkane, substituted
similar materials epoxide, and amino
compound
P-06-0817 09/22/06 12/20/06 CBI (S) Fluorescent (G) Substituted
brightener for use benzene sulfonic
in cellulosic paper acid, salt reaction
applications product with
phenylamine and
amino alcohol and
substituted
propaneamide
compounds with amino
alcohol
P-06-0818 09/22/06 12/20/06 CBI (G) Polymer for (G) Benzoic acid,
injection molding 2,2'-
and extrusion [substituted]bis-,
dimethyl ester,
polymer with 1,4-
benzenediol,
(substituted) 1,4-
benzenediol and 4,4'-
(1-
substituted)bis[phen
ol]
P-06-0819 09/22/06 12/20/06 CBI (G) Polymer for (G) Benzoic acid,
injection molding 2,2'-
and extrusion [substituted]bis-,
dimethyl ester,
polymer with 1,4-
benzenediol, and
4,4' (substituted)
bis[phenol]
P-06-0820 09/22/06 12/20/06 CBI (G) Contained use in (G) Trisubstituted
energy production triazine
P-06-0821 09/22/06 12/20/06 CBI (S) Reactive diluent (G) Alkoxylated
in ultra violet pentaerythritol
formulations acrylate
P-06-0822 09/22/06 12/20/06 CBI (G) Acrylic binder (G) Acrylic copolymer
P-06-0823 09/25/06 12/23/06 CBI (S) Aqueous (G) Alkanedioic acid,
dispersion of polymer with
polymer for leather alkanediol,
finishing carbocycledicarboxyl
ic acid, carbocycle-
isocyanato-
(isocyanatoalkyl)-
trialkyl-,
carbocycle
alkylenebis[isocyana
to-, alkanoic acid,
hydroxy-
(hydroxyalkyl)-alkyl-
, trialkylamine, and
1,2-alkyldiamine
P-06-0824 09/25/06 12/23/06 CBI (S) Aqueous (G) 2-propenoic acid,
dispersion of polymer with
polymer for leather cyanoalkene,
finishing alkenoic acid alkyl
ester,
alkylalkenamide,
methylolmethacrylami
de, and an alkenyl
benzene
P-06-0825 09/25/06 12/23/06 CBI (S) Aqueous (G) Oxepanone,
dispersion of polymer with dialkyl-
polymer for leather alkanediol, alkyl-
finishing (hydroxyaalkyl)-
alkanediol,
carbocycle,
isocyanato-
(isocyanatoalkyll)-
trialkyl-, alkanoic
acid, hydroxy-
(hydroxyalkyl)-alkyl-
, alkylamine, N,N-
dialkyl-, aminoalkyl-
trialkylcarbocyclica
mine, and
alkyldiamine
P-06-0826 09/25/06 12/23/06 CBI (G) Stabilizer for (G) Seed-oil based
emulsion polymers surfactant
P-06-0827 09/26/06 12/24/06 CBI (G) Fuel additive (G) Heterocycle
amine, N-
heterocycle,
monoammonium salt
P-06-0828 09/27/06 12/25/06 CBI (G) Dispersive use in (G) Polyacrylate
cooling water terpolymer salt
treatment
P-06-0829 09/27/06 12/25/06 Archer Daniels (G) Petrochemical (S) Fatty acids,
Midland Company replacement canola-oil, me
esters
P-06-0830 09/27/06 12/25/06 Archer Daniels (G) Petrochemical (S) Fatty acids, rape-
Midland Company replacement oil, me esters
P-06-0831 09/27/06 12/25/06 Archer Daniels (G) Petrochemical (S) Fatty acids, corn-
Midland Company replacement oil, me esters
P-06-0832 09/27/06 12/25/06 Archer Daniels (G) Petrochemical (S) Fatty acids, palm-
Midland Company replacement oil, me esters
P-06-0833 09/27/06 12/25/06 Archer Daniels (G) Petrochemical (S) Fatty acids,
Midland Company replacement peanut-oil, me
esters
P-06-0834 09/27/06 12/25/06 Archer Daniels (G) Petrochemical (S) Fatty acids,
Midland Company replacement linseed-oil, me
esters
P-06-0835 09/28/06 12/26/06 CBI (G) Additive, open, (G) Polyester
non-dispersive use urethane copolymer
P-06-0836 09/28/06 12/26/06 CBI (G) Additive, open, (G) Polyester
non-dispersive use urethane copolymer
[[Page 75544]]
P-06-0837 09/28/06 12/26/06 CBI (G) Additive, open, (G) Polyester
non-dispersive use urethane copolymer
P-06-0838 09/28/06 12/26/06 CBI (G) Additive, open, (G) Polyester
non-dispersive use urethane copolymer
P-06-0839 09/29/06 12/27/06 CBI (G) Flame retardants (G)
for plastics and Phenoxyphosphazene
resins oligomer
P-07-0001 10/02/06 12/30/06 Mane, USA (G) Perfumery (G) Cilandrane
ingredient
P-07-0002 10/03/06 12/31/06 CBI (G) Film forming aid (G) Fatty acids, C16-
for paint C18 and C18
formulations; film unsaturated, esters
forming aid for ink with mixed diols and
formulations triols
P-07-0003 10/03/06 12/31/06 CBI (G) Film forming aid (G) Mixed polyol -
for paint glycerol fatty acid
formulations; film ester
forming aid for ink
formulations
P-07-0004 10/03/06 12/31/06 CBI (G) Film forming aid (G) Mixed polyol -
for paint glycerol fatty acid
formulations; film ester
forming aid for ink
formulations
P-07-0005 10/03/06 12/31/06 CBI (G) Film forming aid (G) Mixed polyol -
for paint glycerol fatty acid
formulations; film ester
forming aid for ink
formulations
P-07-0006 10/03/06 12/31/06 CBI (G) Film forming aid (G) Mixed polyol -
for paint glycerol fatty acid
formulations; film ester
forming aid for ink
formulations
P-07-0007 10/03/06 12/31/06 CBI (G) Film forming aid (G) Mixed polyol -
for paint glycerol fatty acid
formulations; film ester
forming aid for ink
formulations
P-07-0008 10/02/06 12/30/06 Ashland Inc., (G) Adhesive (G) Benzene, 1,1'-
Environmental Health methylenebis[4-
and Safety isocyanato-, polymer
with oxirane, methyl-
, polymer with
oxirane, ether with
1,2-propanediol;
poly[oxy(methyl-1,2-
ethanediyl)],
.alpha.,
.alpha.',.alpha.''-
1,2,3-
propanetriyltris[.om
ega.-hydroxy-;
hexanedioic acid,
polymer with 2,2-
dimethyl-1,3-
propanediol, 2-ethyl-
2-(hydroxymethyl)-
1,3-propanediol, 1,6-
hexanediol and 2,2'-
oxybis[ethanol];
hydrocarbons, C9-
unsaturated.,
polymers and phenol;
and krasol
P-07-0009 10/04/06 01/01/07 CBI (S) Polyurethane (G) Aqueous
coating polyurethane
dispersion
P-07-0010 10/04/06 01/01/07 CBI (G) Additive, open, (G) Styrene-maleic
non-dispersive use anhydride copolymer,
reaction products
with polyether, salt
with alkanolamin
P-07-0011 10/04/06 01/01/07 CBI (G) Antioxidant (G) Alkylated phenol
P-07-0012 10/04/06 01/01/07 CBI (S) Resin for inks, (G) Ethanol capped
coatings and polyether
adhesives polyurethane
P-07-0013 10/05/06 01/02/07 CBI (G) Thermoplastic (G) Alkylphenol
resin processing aid novolak modified
for rubber with amine and epoxy
manufacture
P-07-0014 10/05/06 01/02/07 CBI (G) Radiation-curable (G) Polyester
wood, paper and polyurethane
metal coatings, such acrylate oligomer
as wood varnishes,
overprint varnishes
for paper, and metal
coatings
P-07-0015 10/05/06 01/02/07 CBI (S) Reactive dye for (G) Substituted
cellulosic fibers naphthalenedisulfoni
c acid, substituted
amino azo]-, sodium
salt (same generic
name for both
isomers)
P-07-0016 10/06/06 01/03/07 Croda Inc. (G) Fabric care (G) Hydrolyzed wheat
softening agent silicone copolymer
P-07-0017 10/06/06 01/03/07 CBI (G) Siloxane parts of (G)
this new material Aminoalkoxysiloxane,
have water repellent acetates (salts)
effect and hydroxy
or alkoxy group of
this new material
reacts with surface
of frame retardant
materials to make
water repellent
coating
P-07-0018 10/06/06 01/03/07 Ashland Inc., (G) Fiberglass (G) 1,3-propanediol,
Environmental Health reinforced boat 2,2-dimethyl-,
and Safety hulls polymer with
cycloalkyl
diisocyanate, 2,2-
bis[(2-
propenyloxy)methyl]-
1-butanol-blocked
[[Page 75545]]
P-07-0019 10/06/06 01/03/07 Ashland Inc., (G) Fiberglass (G) 1,2-ethanediol,
Environmental Health reinforced boat polymer with
and Safety hulls cycloalkyl
diisocyanate, 2,2-
bis[(2-
propenyloxy)methyl]-
1-butanol-blocked
P-07-0020 10/06/06 01/03/07 Ashland Inc., (G) Fiberglass (G) Poly(oxy-1,2-
Environmental Health reinforced boat ethanediyl), .alpha.-
and Safety hulls hydro-.omega.-
hydroxy-, polymer
with cycloalkyl
diisocyanate, 2,2'-
bis[(2-
propenyloxy)methyl]-
1-butanol-blocked
P-07-0021 10/10/06 01/07/07 CIBA Specialty (S) Flame retardant (G) Phenol, 2,4-
Chemicals for polymers bis(1,1-branched
Corporation alkyl)-, phosphate
(3:1)
P-07-0022 10/10/06 01/07/07 CBI (S) Polyurethane (G) Aqueous
coating polyurethane
dispersion
P-07-0023 10/10/06 01/07/07 CBI (S) Polyurethane (G) Aqueous
coating polyurethane
dispersion
P-07-0024 10/10/06 01/07/07 CBI (S) Emulsifier for (G) Alkylamine
oilfield application ethoxylated
P-07-0025 10/10/06 01/07/07 CBI (G) Contained use in (G) Alkyl ether
energy production trialkyl quaternary
ammonium compound
P-07-0026 10/10/06 01/07/07 CBI (G) Contained use in (G) Alkyl ether
energy production trialkyl quaternary
ammonium compound
P-07-0027 10/11/06 01/08/07 CBI (S) A component in (G) Dicarboxylic
ultraviolet -, based acid, polymer
visible light and with a
electron beam dicarboxylate, 2-
curable formulations ethyl-2-
(hydroxymethyl)-1,3-
propanediol and 2-
methyl-1,3-
propanediol, 2-
propenoate
P-07-0028 10/12/06 01/09/07 CBI (G) Open, non- (G) Diphenolmethyl
dispersive (resin) based polymer resin
P-07-0029 10/13/06 01/10/07 CBI (S) Electrodeposition (G) Amine functional
coating for metallic epoxy based resin
substrates salted with an
organic acid and
grafted with
anhydride
P-07-0030 10/13/06 01/10/07 CBI (S) Electrodeposition (G) Amine functional
coating for metallic epoxy based resin
substrates salted with an
organic acid and
grafted with
anhydride
P-07-0031 10/13/06 01/10/07 CBI (S) Electrodeposition (G) Amine functional
coating for metallic epoxy based resin
substrates salted with an
organic acid and
grafted with
anhydride
P-07-0032 10/13/06 01/10/07 CBI (S) Electrodeposition (G) Amine functional
coating for metallic epoxy based resin
substrates salted with an
organic acid and
grafted with
anhydride
P-07-0033 10/13/06 01/10/07 CBI (S) Electrodeposition (G) Amine functional
coating for metallic epoxy based resin
substrates salted with an
organic acid and
grafted with
anhydride
P-07-0034 10/13/06 01/10/07 CBI (S) Electrodeposition (G) Amine functional
coating for metallic epoxy based resin
substrates salted with an
organic acid and
grafted with
anhydride
P-07-0035 10/12/06 01/09/07 CBI (G) Polymeric binder (G) Methacrylate
copolymer
P-07-0036 10/12/06 01/09/07 CBI (G) Polymeric binder (G) Methacrylate
copolymer
P-07-0037 10/13/06 01/10/07 Piedmont Chemical (S) Binder resin for (S) 1,3-
Industries I, LLC polyester fabric benzenedicarboxylic
