Improving Patient Safety by Enhancing the Container Labeling for Parenteral Infusion Drug Products; Public Meeting, 68819-68820 [E6-20035]
Download as PDF
Federal Register / Vol. 71, No. 228 / Tuesday, November 28, 2006 / Notices
practical utility; (b) the accuracy of the
agency’s estimate of the burden of the
proposed collection of information; (c)
the quality, utility, and clarity of the
information to be collected; and (d)
ways to minimize the burden of the
collection of information on
respondents, including through the use
of automated collection techniques or
other forms of information technology.
Consideration will be given to
comments and suggestions submitted
within 60 days of this publication.
Dated: November 21, 2006.
Robert Sargis,
Reports Clearance Officer.
[FR Doc. 06–9413 Filed 11–27–06; 8:45 am]
BILLING CODE 4184–01–M
DEPARTMENT OF HEALTH AND
HUMAN SERVICES
Food and Drug Administration
[Docket No. 2006N–0465]
Improving Patient Safety by Enhancing
the Container Labeling for Parenteral
Infusion Drug Products; Public
Meeting
AGENCY:
Food and Drug Administration,
HHS.
reached by Metro using the Medical
Center Station on the red line. Parking
is limited at NIH, so Metro use is
recommended. For directions and
visitor information, see https://
www.nih.gov/about/visitor/index.htm.
(FDA has verified the Web site address,
but FDA is not responsible for any
subsequent changes to the Web site after
this document publishes in the Federal
Register).
Submit written comments to the
Division of Dockets Management (HFA–
305), Food and Drug Administration,
5630 Fishers Lane, rm. 1061, Rockville,
MD 20852. Submit electronic comments
to https://www.fda.gov/dockets/
ecomments. Submit written or
electronic requests to speak at the
meeting to the information contact.
Transcripts of the hearing will be
available for review at the Division of
Dockets Management and on the
Internet at https://www.fda.gov/cder/
meeting/parenteralllabeling.htm.
FOR FURTHER INFORMATION CONTACT: Jean
Chung, Center for Drug Evaluation and
Research (HFD–400), Food and Drug
Administration, 5600 Fishers Lane,
Rockville, MD 20857, 301–796–2380, email: jean.chung@fda.hhs.gov.
SUPPLEMENTARY INFORMATION:
ACTION:
I. Background
SUMMARY: The Food and Drug
Administration (FDA) is announcing a
public meeting on improving patient
safety by enhancing the container
labeling for parenteral infusion drug
products. This will be a 1-day workshop
involving FDA staff and representatives
of the United States Pharmacopeia
(USP) and the Institute for Safe
Medication Practices (ISMP). The
purpose of the meeting is to explore
how labels on intravenous (IV) drug
products could be designed to minimize
medication errors. Design issues include
placement, style and type of
information, the need for standard
expression of strength, quantity of
information, and use of color on the
label.
DATES: The public meeting will be held
on January 11, 2007, from 8 a.m. to 4
p.m. Submit written or electronic
requests to speak by December 28, 2006.
Written or electronic comments to the
docket will be accepted until April 12,
2007.
ADDRESSES: The public meeting will be
held at the Lister Hill Center
Auditorium (the center), National
Institutes of Health (NIH) campus, 9000
Rockville Pike, bldg. 38A, Bethesda, MD
20815, 301–496–4441. The center can be
Premixed large volume parenterals
(LVPs) and small volume parenterals
(SVPs) in ready to infuse final dosage
forms are designed to deliver premixed
drugs (e.g., antibiotics, electrolyte
solutions, pain management infusions).
Premixed LVPs and SVPs improve
standardized drug delivery and can
reduce the potential for medication
errors by reducing the steps required in
IV preparation and the additional
quality control checks needed by the
pharmacy prior to dispensing and
administering the product. Premixed
LVPs and SVPs: (1) Provide an end
product that is labeled with the
ingredients including a product
identification code (e.g., bar code), (2)
promote a sterile environment, and (3)
maintain accurate concentration within
a closed system. According to the USP,
‘‘the designation large-volume
intravenous solution applies to a singledose injection that is intended for
intravenous use and is packaged in
containers labeled as containing more
than 100 mL. The designation smallvolume injection applies to an injection
that is packaged in containers labeled as
containing 100 mL or less.’’
Although premixed LVPs and SVPs
can reduce the potential for mixing
errors, the labels and labeling of these
products, as well as base solutions of
ycherry on PROD1PC61 with NOTICES
Notice of public meeting;
request for comments.
VerDate Aug<31>2005
15:42 Nov 27, 2006
Jkt 211001
PO 00000
Frm 00026
Fmt 4703
Sfmt 4703
68819
LVPs and SVPs without drug, have been
documented as contributing to
medication errors in both acute care and
ambulatory settings, as well as in home
care settings. The types of errors
reported involve the inability to
distinguish different drug products, as
well as different strengths of drug
products, because the containers look
similar and use similar colors for label
text. In addition to these visual
similarities, manufacturers may label
the same drug product with varying
units of measure (e.g., micrograms
versus milligrams), which has also
contributed to error. There is also a large
amount of information that is placed on
the container label that can not only
crowd the label but can distract from the
most important information, that is, the
proprietary and established names and
product strength.Thus, we would like to
explore how current IV labels should be
designed to minimize medication errors.
II. Scope of the Public Meeting
The public meeting is intended to
explore how IV labels could be designed
to minimize medication errors. Design
issues include placement, style and type
of information, the need for standard
expression of strength, quantity of
information, and use of color on the
label.
This 1-day workshop will assemble
drug safety experts, patient advocates,
government experts, and
pharmaceutical and device
manufacturers to discuss outstanding
regulatory, technological, and resource
issues. Other interested constituencies
(e.g., patient advocacy and education
groups, pharmaceutical sponsors,
general public) will have an opportunity
to provide input during the question
and comment periods. FDA is interested
in obtaining public comment and
encourages all interested parties to
submit requests to speak at the meeting
or to submit written or electronic
comments to the docket. (See sections
III. and IV. of this document.)
The meeting will include an overview
of FDA and USP requirements,
presentations from the clinical
perspective (nurse and pharmacist) and
industry perspective, and a series of
panel discussions. The following topics
will be discussed: Look-alike containers,
confusing labels on sterile water
containers, container label
requirements, and the lack of
standardized expression of medication
concentration on labels. Questions that
will be considered during this public
meeting include, but are not limited to,
the following:
1. What are the best solutions to
differentiate look-alike container labels
E:\FR\FM\28NON1.SGM
28NON1
68820
Federal Register / Vol. 71, No. 228 / Tuesday, November 28, 2006 / Notices
ycherry on PROD1PC61 with NOTICES
of premixed LVPs and SVPs containing
different medications (among different
product lines from the same
manufacturer and across different
manufacturer product lines)?
2. Would the use of color
differentiation on labels prevent
medication errors? Can different colors
be used on intravenous bags? If not,
what are the barriers and possible ways
to address them?
3. What information currently
required to appear on intravenous
container labels can be eliminated or
placed elsewhere in order to make room
for more important information such as
barcodes, larger font size for drug
names, new standard ways to express
drug concentration, and product
warnings? How can industry make the
best use of the limited space on labels?
What type of standards for layout and
type size would need to be applied to
correct for the confusion among the
products?
4. How does the lack of
standardization in the expression of
medication concentrations on labels
contribute to error? How can we
standardize the expression of drug
concentrations on IV drug container
labels?
5. How do the similar labels for
Sterile Water for Injection, Sterile Water
for Irrigation, and Sterile Water for
Inhalation lead to medication errors
(i.e., deaths in some instances have been
reported)? How can the label for sterile
water be improved to minimize the risk
of confusing the different routes of
administration?
6. What strategies are there to prevent
inadvertent administration of solutions
not intended for parenteral IV use?
7. What are the regulatory,
technological, and resource (cost)
barriers that would need to be
eliminated to correct the challenges
identified today, if any? What are the
practical resolutions to address these
challenges?
III. Registration, Requests to Speak,
Agenda, and Presentations
No registration is required to attend
the meeting. Seating will be on a firstcome, first-served basis. If you need
special accommodations due to a
disability, please inform the contact
person (see FOR FURTHER INFORMATION
CONTACT).
Interested persons may request to
speak at the meeting (see FOR FURTHER
INFORMATION CONTACT). Statements from
the public will be scheduled between
2:45 p.m. and 3:45 p.m., and the time
allotted for each speaker will be limited.
Requests to speak at the meeting should
include: (1) The specific topic or issue
VerDate Aug<31>2005
15:42 Nov 27, 2006
Jkt 211001
to be addressed, (2) a brief summary of
remarks, and (3) the participant’s name,
address, telephone number, and e-mail.
The agenda for the public meeting
will be available on FDA’s Center for
Drug Evaluation and Research (CDER)
Web site at: https://www.fda.gov/cder/
meeting/parenteralllabeling.htm. After
the meeting, the agenda, presentations,
and transcript will be placed on file in
the Division of Dockets Management
under the docket number found in the
heading of this document and on
CDER’s Web site identified in the
previous sentence.
IV. Request for Comments
Interested persons may submit to the
Division of Dockets Management (see
ADDRESSES) written or electronic
comments on the topics discussed in
this document (see DATES). Submit two
paper copies of any mailed comments,
except that individuals may submit one
paper copy. Comments are to be
identified with the docket number
found in brackets in the heading of this
document. Received comments may be
seen in the Division of Dockets
Management between 9 a.m. and 4 p.m.,
Monday through Friday.
V. Transcripts
Copies of the transcript may be
requested in writing from the Freedom
of Information Office (HFI–35), Food
and Drug Administration, 5600 Fishers
Lane, rm. 6–30, Rockville, MD 20857,
approximately 20 working days after the
meeting at a cost of 10 cents per page
or on compact disc at a cost of $14.25
each. You may also examine the
transcript at the Division of Dockets
Management between 9 a.m. and 4 p.m.,
Monday through Friday.
Dated: November 20, 2006.
Jeffrey Shuren,
Assistant Commissioner for Policy.
[FR Doc. E6–20035 Filed 11–27–06; 8:45 am]
BILLING CODE 4160–01–S
DEPARTMENT OF HEALTH AND
HUMAN SERVICES
Food and Drug Administration
ACTION:
Notice; extension of comment
period.
SUMMARY: The Food and Drug
Administration (FDA) is extending the
comment period on the draft guidance
entitled ‘‘Commercially Distributed
Analyte Specific Reagents (ASRs):
Frequently Asked Questions.’’ FDA
announced the availability of this draft
guidance in the Federal Register of
September 7, 2006 (71 FR 52799). The
initial comment period closes on
December 6, 2006. To provide interested
persons additional time to review and
submit comments on the draft guidance,
FDA has decided to extend the
comment period.
DATES: Submit written or electronic
comments on this draft guidance by
March 5, 2007. General comments on
agency guidance documents are
welcome at any time.
ADDRESSES: Submit written requests for
single copies of the draft guidance
document entitled ‘‘Commercially
Distributed Analyte Specific Reagents
(ASRs): Frequently Asked Questions’’ to
the Division of Small Manufacturers,
International, and Consumer Assistance
(HFZ–220), Center for Devices and
Radiological Health, Food and Drug
Administration, 1350 Piccard Dr.,
Rockville, MD 20850. Send one selfaddressed adhesive label to assist that
office in processing your request, or fax
your request to 240–276–3151. See the
SUPPLEMENTARY INFORMATION section for
information on electronic access to the
guidance.
Submit written comments concerning
this draft guidance to the Division of
Dockets Management (HFA–305), Food
and Drug Administration, 5630 Fishers
Lane, rm. 1061, Rockville, MD 20852.
Submit electronic comments to https://
www.fda.gov/dockets/ecomments.
Identify comments with the docket
number found in brackets in the
heading of this document.
FOR FURTHER INFORMATION CONTACT:
Courtney Harper, Center for Devices and
Radiological Health (HFZ–440), Food
and Drug Administration, 2098 Gaither
Rd., Rockville, MD 20850, 240–276–
0490, ext. 162.
SUPPLEMENTARY INFORMATION:
[Docket No. 2006D–0336]
I. Background
Draft Guidance for Industry and Food
and Drug Administration Staff;
Commercially Distributed Analyte
Specific Reagents (ASRs): Frequently
Asked Questions; Availability;
Extension of Comment Period
FDA is extending the comment period
on the draft guidance ‘‘Commercially
Distributed Analyte Specific Reagents
(ASRs): Frequently Asked Questions.’’
This draft guidance is intended to help
eliminate confusion regarding particular
marketing practices among ASR
manufacturers. With the draft guidance
document, FDA seeks to advise ASR
AGENCY:
Food and Drug Administration,
HHS.
PO 00000
Frm 00027
Fmt 4703
Sfmt 4703
E:\FR\FM\28NON1.SGM
28NON1
Agencies
[Federal Register Volume 71, Number 228 (Tuesday, November 28, 2006)]
[Notices]
[Pages 68819-68820]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: E6-20035]
-----------------------------------------------------------------------
DEPARTMENT OF HEALTH AND HUMAN SERVICES
Food and Drug Administration
[Docket No. 2006N-0465]
Improving Patient Safety by Enhancing the Container Labeling for
Parenteral Infusion Drug Products; Public Meeting
AGENCY: Food and Drug Administration, HHS.
ACTION: Notice of public meeting; request for comments.
-----------------------------------------------------------------------
SUMMARY: The Food and Drug Administration (FDA) is announcing a public
meeting on improving patient safety by enhancing the container labeling
for parenteral infusion drug products. This will be a 1-day workshop
involving FDA staff and representatives of the United States
Pharmacopeia (USP) and the Institute for Safe Medication Practices
(ISMP). The purpose of the meeting is to explore how labels on
intravenous (IV) drug products could be designed to minimize medication
errors. Design issues include placement, style and type of information,
the need for standard expression of strength, quantity of information,
and use of color on the label.
DATES: The public meeting will be held on January 11, 2007, from 8 a.m.
to 4 p.m. Submit written or electronic requests to speak by December
28, 2006. Written or electronic comments to the docket will be accepted
until April 12, 2007.
ADDRESSES: The public meeting will be held at the Lister Hill Center
Auditorium (the center), National Institutes of Health (NIH) campus,
9000 Rockville Pike, bldg. 38A, Bethesda, MD 20815, 301-496-4441. The
center can be reached by Metro using the Medical Center Station on the
red line. Parking is limited at NIH, so Metro use is recommended. For
directions and visitor information, see https://www.nih.gov/about/
visitor/index.htm. (FDA has verified the Web site address, but FDA is
not responsible for any subsequent changes to the Web site after this
document publishes in the Federal Register).
Submit written comments to the Division of Dockets Management (HFA-
305), Food and Drug Administration, 5630 Fishers Lane, rm. 1061,
Rockville, MD 20852. Submit electronic comments to https://www.fda.gov/
dockets/ecomments. Submit written or electronic requests to speak at
the meeting to the information contact. Transcripts of the hearing will
be available for review at the Division of Dockets Management and on
the Internet at https://www.fda.gov/cder/meeting/parenteral_
labeling.htm.
FOR FURTHER INFORMATION CONTACT: Jean Chung, Center for Drug Evaluation
and Research (HFD-400), Food and Drug Administration, 5600 Fishers
Lane, Rockville, MD 20857, 301-796-2380, e-mail:
jean.chung@fda.hhs.gov.
SUPPLEMENTARY INFORMATION:
I. Background
Premixed large volume parenterals (LVPs) and small volume
parenterals (SVPs) in ready to infuse final dosage forms are designed
to deliver premixed drugs (e.g., antibiotics, electrolyte solutions,
pain management infusions). Premixed LVPs and SVPs improve standardized
drug delivery and can reduce the potential for medication errors by
reducing the steps required in IV preparation and the additional
quality control checks needed by the pharmacy prior to dispensing and
administering the product. Premixed LVPs and SVPs: (1) Provide an end
product that is labeled with the ingredients including a product
identification code (e.g., bar code), (2) promote a sterile
environment, and (3) maintain accurate concentration within a closed
system. According to the USP, ``the designation large-volume
intravenous solution applies to a single-dose injection that is
intended for intravenous use and is packaged in containers labeled as
containing more than 100 mL. The designation small-volume injection
applies to an injection that is packaged in containers labeled as
containing 100 mL or less.''
Although premixed LVPs and SVPs can reduce the potential for mixing
errors, the labels and labeling of these products, as well as base
solutions of LVPs and SVPs without drug, have been documented as
contributing to medication errors in both acute care and ambulatory
settings, as well as in home care settings. The types of errors
reported involve the inability to distinguish different drug products,
as well as different strengths of drug products, because the containers
look similar and use similar colors for label text. In addition to
these visual similarities, manufacturers may label the same drug
product with varying units of measure (e.g., micrograms versus
milligrams), which has also contributed to error. There is also a large
amount of information that is placed on the container label that can
not only crowd the label but can distract from the most important
information, that is, the proprietary and established names and product
strength.Thus, we would like to explore how current IV labels should be
designed to minimize medication errors.
II. Scope of the Public Meeting
The public meeting is intended to explore how IV labels could be
designed to minimize medication errors. Design issues include
placement, style and type of information, the need for standard
expression of strength, quantity of information, and use of color on
the label.
This 1-day workshop will assemble drug safety experts, patient
advocates, government experts, and pharmaceutical and device
manufacturers to discuss outstanding regulatory, technological, and
resource issues. Other interested constituencies (e.g., patient
advocacy and education groups, pharmaceutical sponsors, general public)
will have an opportunity to provide input during the question and
comment periods. FDA is interested in obtaining public comment and
encourages all interested parties to submit requests to speak at the
meeting or to submit written or electronic comments to the docket. (See
sections III. and IV. of this document.)
The meeting will include an overview of FDA and USP requirements,
presentations from the clinical perspective (nurse and pharmacist) and
industry perspective, and a series of panel discussions. The following
topics will be discussed: Look-alike containers, confusing labels on
sterile water containers, container label requirements, and the lack of
standardized expression of medication concentration on labels.
Questions that will be considered during this public meeting include,
but are not limited to, the following:
1. What are the best solutions to differentiate look-alike
container labels
[[Page 68820]]
of premixed LVPs and SVPs containing different medications (among
different product lines from the same manufacturer and across different
manufacturer product lines)?
2. Would the use of color differentiation on labels prevent
medication errors? Can different colors be used on intravenous bags? If
not, what are the barriers and possible ways to address them?
3. What information currently required to appear on intravenous
container labels can be eliminated or placed elsewhere in order to make
room for more important information such as barcodes, larger font size
for drug names, new standard ways to express drug concentration, and
product warnings? How can industry make the best use of the limited
space on labels? What type of standards for layout and type size would
need to be applied to correct for the confusion among the products?
4. How does the lack of standardization in the expression of
medication concentrations on labels contribute to error? How can we
standardize the expression of drug concentrations on IV drug container
labels?
5. How do the similar labels for Sterile Water for Injection,
Sterile Water for Irrigation, and Sterile Water for Inhalation lead to
medication errors (i.e., deaths in some instances have been reported)?
How can the label for sterile water be improved to minimize the risk of
confusing the different routes of administration?
6. What strategies are there to prevent inadvertent administration
of solutions not intended for parenteral IV use?
7. What are the regulatory, technological, and resource (cost)
barriers that would need to be eliminated to correct the challenges
identified today, if any? What are the practical resolutions to address
these challenges?
III. Registration, Requests to Speak, Agenda, and Presentations
No registration is required to attend the meeting. Seating will be
on a first-come, first-served basis. If you need special accommodations
due to a disability, please inform the contact person (see FOR FURTHER
INFORMATION CONTACT).
Interested persons may request to speak at the meeting (see FOR
FURTHER INFORMATION CONTACT). Statements from the public will be
scheduled between 2:45 p.m. and 3:45 p.m., and the time allotted for
each speaker will be limited. Requests to speak at the meeting should
include: (1) The specific topic or issue to be addressed, (2) a brief
summary of remarks, and (3) the participant's name, address, telephone
number, and e-mail.
The agenda for the public meeting will be available on FDA's Center
for Drug Evaluation and Research (CDER) Web site at: https://
www.fda.gov/cder/meeting/parenteral_labeling.htm. After the meeting,
the agenda, presentations, and transcript will be placed on file in the
Division of Dockets Management under the docket number found in the
heading of this document and on CDER's Web site identified in the
previous sentence.
IV. Request for Comments
Interested persons may submit to the Division of Dockets Management
(see ADDRESSES) written or electronic comments on the topics discussed
in this document (see DATES). Submit two paper copies of any mailed
comments, except that individuals may submit one paper copy. Comments
are to be identified with the docket number found in brackets in the
heading of this document. Received comments may be seen in the Division
of Dockets Management between 9 a.m. and 4 p.m., Monday through Friday.
V. Transcripts
Copies of the transcript may be requested in writing from the
Freedom of Information Office (HFI-35), Food and Drug Administration,
5600 Fishers Lane, rm. 6-30, Rockville, MD 20857, approximately 20
working days after the meeting at a cost of 10 cents per page or on
compact disc at a cost of $14.25 each. You may also examine the
transcript at the Division of Dockets Management between 9 a.m. and 4
p.m., Monday through Friday.
Dated: November 20, 2006.
Jeffrey Shuren,
Assistant Commissioner for Policy.
[FR Doc. E6-20035 Filed 11-27-06; 8:45 am]
BILLING CODE 4160-01-S