Glenn/Colusa County Resource Advisory Committee, 46447 [06-6893]
Download as PDF
<![CDATA[
Federal Register / Vol. 71, No. 156 / Monday, August 14, 2006 / Notices
DEPARTMENT OF AGRICULTURE
DEPARTMENT OF COMMERCE
Forest Service
International Trade Administration
Glenn/Colusa County Resource
Advisory Committee
(A–583–008, A–583–814)
AGENCY:
ACTION:
Continuation of Antidumping Duty
Orders on Certain Circular Welded
Carbon Steel Pipes and Tubes from
Taiwan, and Circular Welded Non–
Alloy Steel Pipe from Taiwan
Forest Service, USDA.
Notice of meeting.
SUMMARY: The Glenn/Colusa County
Resource Advisory Committee (RAC)
will meet in Willows, California.
Agenda items to be covered include: (1)
Introductions, (2) Approval of Minutes,
(3) Public Comment, (4) Project
Proposals/Possible Action, (5) General
Discussion, (6) Next Agenda.
The meeting will be held on
August 28, 2006, from 1:30 p.m. and
end at approximately 4:30 p.m.
DATES:
The meeting will be held at
the Mendocino National Forest
Supervisor’s Office, 825 N. Humboldt
Ave., Willows, CA 95988. Individuals
wishing to speak or propose agenda
items must send their name and
proposals to Tricia Christofferson,
Acting DFO, 825 N. Humboldt Ave.,
Willows, CA 95988.
ADDRESSES:
FOR FURTHER INFORMATION CONTACT:
Bobbin Gaddini, Committee
Coordinator, USDA, Mendocino
National Forest, Grindstone Ranger
District, 825 N. Humboldt Ave.,
Willows, CA 95939. (530) 934–1268;
E-mail: ggaddini@fs.fed.us.
SUPPLEMENTARY INFORMATION:
Scope of the Orders
The
meeting is open to the public.
Committee discussion is limited to
Forest Service staff and Committee
members. However, persons who wish
to bring matters to the attention of the
Committee may file written statements
with the Committee staff before or after
the meeting. Public input sessions will
be provided and individuals who made
written requests by August 24, 2006 will
have the opportunity to address the
committee at those sessions.
Dated: August 8, 2006.
Tricia Christofferson,
Acting Designated Federal Official.
[FR Doc. 06–6893 Filed 8–11–06; 8:45 am]
jlentini on PROD1PC65 with NOTICES
BILLING CODE 3410–11–M
VerDate Aug<31>2005
17:58 Aug 11, 2006
Jkt 208001
Import Administration,
International Trade Administration,
Department of Commerce.
SUMMARY: As a result of the
determinations by the Department of
Commerce (the Department) and the
International Trade Commission (ITC)
that revocation of the antidumping duty
orders on certain circular welded carbon
steel pipes and tubes from Taiwan, and
circular welded non–alloy steel pipe
from Taiwan, would likely lead to
continuation or recurrence of dumping,
the Department is publishing notice of
continuation of these antidumping duty
orders.
EFFECTIVE DATE: August 14, 2006
CONTACT INFORMATION: Martha Douthit
or Dana Mermelstein, AD/CVD
Operations, Office 6, Import
Administration, International Trade
Administration, U.S. Department of
Commerce, 14th Street and Constitution
Avenue, NW, Washington, DC 20230;
telephone:(202) 482–5050 or (202) 482–
1391, respectively.
SUPPLEMENTARY INFORMATION:
AGENCY:
Certain Circular Welded Carbon Steel
Pipes and Tubes from Taiwan - (A–583–
008)
Imports covered by this antidumping
duty order are shipments of certain
circular welded carbon steel pipes and
tubes. The Department defines such
merchandise as welded carbon steel
pipes and tubes of circular cross section,
with walls not thinner than 0.065 inch
and 0.375 inch or more but not over 4
1/2 inches in outside diameter. These
products are commonly referred to as
‘‘standard pipe’’ and are produced to
various American Society for Testing
Materials Specifications, most notably
A–53, A–120, or A–135. Standard pipe
is currently classified under
Harmonized Tariff Schedule of the
United States (HTSUS) item numbers
7306.30.5025, 7306.30.5032,
7306.30.5040, and 7306.30.5055.
Although the HTSUS subheading is
provided for convenience and customs
purposes, the written description of the
merchandise under this antidumping
duty order is dispositive.
PO 00000
Frm 00002
Fmt 4703
Sfmt 4703
46447
Circular Welded Non–Alloy Steel Pipe
from Taiwan- (A–583–814)
The products covered by this order
are: (1) Circular welded non–alloy steel
pipes and tubes, of circular cross–
section over 114.3 millimeters (4.5
inches), but not over 406.4 millimeters
(16 inches) in outside diameter, with a
wall thickness of 1.65 millimeters (0.065
inches) or more, regardless of surface
finish (black, galvanized, or painted), or
end finish (plain end, bevelled end,
threaded, or threaded and coupled); and
(2) circular welded non–alloy steel
pipes and tubes, of circular cross–
section less than 406.4 millimeters (16
inches), with a wall thickness of less
than 1.65 millimeters (0.065 inches),
regardless of surface finish (black,
galvanized, or painted) or end finish
(plain end, bevelled end, threaded, or
threaded and coupled). These pipes and
tubes are generally known as standard
pipes and tubes and are intended for the
low pressure conveyance of water,
steam, natural gas, air, and other liquids
and gases in plumbing and heating
systems, air conditioning units,
automatic sprinkler systems, and other
related uses, and generally meet ASTM
A–53 specifications. Standard pipe may
also be used for light load–bearing
applications, such as for fence tubing,
and as structural pipe tubing used for
framing and support members for
construction or load–bearing purposes
in the construction, shipbuilding,
trucking, farm equipment, and related
industries. Unfinished conduit pipe is
also included in these orders. All carbon
steel pipes and tubes within the
physical description outlined above are
included within the scope of this order,
except line pipe, oil country tubular
goods, boiler tubing, mechanical tubing,
pipe and tube hollows for redraws,
finished scaffolding, and finished
conduit. Standard pipe that is dual or
triple certified/stenciled that enters the
U.S. as line pipe of a kind used for oil
and gas pipelines is also not included in
this order. Imports of the products
covered by this order are currently
classifiable under the following
Harmonized Tariff Schedule (HTS)
subheadings: 7306.30.10.00,
7306.30,50.25, 7306.30.50.32,
7306.30.50.40, 7306.30.50.55,
7306.30.50.85, 7306.30.50.90. Although
the HTS subheadings are provided for
convenience and customs purposes, our
written description of the scope of these
proceedings is dispositive.
Background
On July 5, 2005, the Department
initiated and the ITC instituted sunset
reviews of the antidumping duty orders
E:\FR\FM\14AUN1.SGM
14AUN1
]]>Agencies
[Federal Register Volume 71, Number 156 (Monday, August 14, 2006)]
[Notices]
[Page 46447]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 06-6893]
[[Page 46447]]
-----------------------------------------------------------------------
DEPARTMENT OF AGRICULTURE
Forest Service
Glenn/Colusa County Resource Advisory Committee
AGENCY: Forest Service, USDA.
ACTION: Notice of meeting.
-----------------------------------------------------------------------
SUMMARY: The Glenn/Colusa County Resource Advisory Committee (RAC) will
meet in Willows, California. Agenda items to be covered include: (1)
Introductions, (2) Approval of Minutes, (3) Public Comment, (4) Project
Proposals/Possible Action, (5) General Discussion, (6) Next Agenda.
DATES: The meeting will be held on August 28, 2006, from 1:30 p.m. and
end at approximately 4:30 p.m.
ADDRESSES: The meeting will be held at the Mendocino National Forest
Supervisor's Office, 825 N. Humboldt Ave., Willows, CA 95988.
Individuals wishing to speak or propose agenda items must send their
name and proposals to Tricia Christofferson, Acting DFO, 825 N.
Humboldt Ave., Willows, CA 95988.
FOR FURTHER INFORMATION CONTACT: Bobbin Gaddini, Committee Coordinator,
USDA, Mendocino National Forest, Grindstone Ranger District, 825 N.
Humboldt Ave., Willows, CA 95939. (530) 934-1268; E-mail:
ggaddini@fs.fed.us.
SUPPLEMENTARY INFORMATION: The meeting is open to the public. Committee
discussion is limited to Forest Service staff and Committee members.
However, persons who wish to bring matters to the attention of the
Committee may file written statements with the Committee staff before
or after the meeting. Public input sessions will be provided and
individuals who made written requests by August 24, 2006 will have the
opportunity to address the committee at those sessions.
Dated: August 8, 2006.
Tricia Christofferson,
Acting Designated Federal Official.
[FR Doc. 06-6893 Filed 8-11-06; 8:45 am]
BILLING CODE 3410-11-M
