Continuation of Antidumping Duty Orders on Circular Welded Non-Alloy Pipes and Tubes from Brazil, Mexico, Republic of Korea, Antidumping Duty Orders on Welded Carbon Steel Pipe from India, Thailand and Turkey, and Countervailing Duty Order on Welded Carbon Steel Standard Pipe from Turkey, 44996-44998 [E6-12794]
Download as PDF
44996
Federal Register / Vol. 71, No. 152 / Tuesday, August 8, 2006 / Notices
Dated at Washington, DC, August 3, 2006.
Ivy L. Davis,
Acting Chief, Regional Programs
Coordination Unit.
[FR Doc. E6–12873 Filed 8–7–06; 8:45 am]
BILLING CODE 6335–01–P
DEPARTMENT OF COMMERCE
Foreign–Trade Zones Board
International Trade Administration
Order No. 1467
(A–351–809, A–201–805, A–580–809, A–533–
502, A–549–502, A–489–501, C–489–502)
Expansion of Foreign–Trade Zone 163,
Ponce, Puerto Rico
Pursuant to its authority under the
Foreign–Trade Zones Act of June 18, 1934, as
amended (19 U.S.C. 81a–81u), the Foreign–
Trade Zones Board (the Board) adopts the
following Order:
DEPARTMENT OF COMMERCE
Foreign-Trade Zones Board
Order No. 1466
Termination Of Foreign-Trade
Subzones 133B and 133C, (Maytag
Corporation), Herrin, Illinois and
Newton, Iowa
Pursuant to the authority granted in the
Foreign-Trade Zones Act of June 18, 1934, as
amended (19 U.S.C. 81a-81u), and the
Foreign-Trade Zones Board Regulations (15
CFR Part 400), the Foreign-Trade Zones
Board has adopted the following order:
Whereas, on November 1, 1989, the
Foreign-Trade Zones Board issued a
grant of authority to the Quad-City
Foreign-Trade Zone, Inc. (Quad-City)
authorizing the establishment of
Foreign-Trade Subzones 133B and 133C
at the Maytag Corporation facilities in
Herrin, Illinois and Newton, Iowa
(Board Order 448, 54 FR 47246, 11/13/
89);
Whereas, Quad-City advised the
Board on August 9, 2005 (FTZ Docket
19-2006), that zone procedures were no
longer needed at the facilities and
requested voluntary termination of
Subzones 133B and 133C;
Whereas, the request has been
reviewed by the FTZ Staff and Customs
and Border Protection officials, and
approval has been recommended;
Now, therefore, the Foreign-Trade
Zones Board terminates the subzone
status of Subzones 133B and 133C,
effective this date.
Signed at Washington, DC, this 26th day of
July 2006.
jlentini on PROD1PC65 with NOTICES
DEPARTMENT OF COMMERCE
Whereas, CODEZOL, C.D., grantee of
Foreign–Trade Zone 163, submitted an
application to the Board for authority to
expand FTZ 163 to include a site in
Guaynabo, Puerto Rico, adjacent to the
San Juan Customs and Border Protection
port of entry (FTZ Docket 67–2005, filed
12/22/2005);
Whereas, notice inviting public
comment has been given in the Federal
Register (70 FR 77376–77377, 12/30/
2005); and,
Whereas, the Board adopts the
findings and recommendations of the
examiner’s report, and finds that the
requirements of the FTZ Act and
Board’s regulations are satisfied, and
that approval of the application is in the
public interest;
Now, therefore, the Board hereby
orders:
The application to expand FTZ 163 is
approved, subject to the FTZ Act and
the Board’s regulations, including
Section 400.28.
Signed at Washington, DC, this 26th day of
July 2006.
David M. Spooner,
Assistant Secretary of Commerce for Import
Administration, Alternate Chairman,
Foreign–Trade Zones Board.
Attest:
Andrew McGilvray,
Acting Executive Secretary.
[FR Doc. E6–12810 Filed 8–7–06; 8:45 am]
Billing Code: 3510–DS–S
David M. Spooner,
Assistant Secretary of Commerce for Import
Administration, Alternate Chairman. ForeignTrade Zones Board.
Attest:
Andrew McGilvray,
Acting Executive Secretary.
[FR Doc. E6–12816 Filed 8–7–06; 8:45 am]
Billing Code: 3510–DS–S
VerDate Aug<31>2005
20:06 Aug 07, 2006
Jkt 208001
PO 00000
Frm 00003
Fmt 4703
Sfmt 4703
Continuation of Antidumping Duty
Orders on Circular Welded Non–Alloy
Pipes and Tubes from Brazil, Mexico,
Republic of Korea, Antidumping Duty
Orders on Welded Carbon Steel Pipe
from India, Thailand and Turkey, and
Countervailing Duty Order on Welded
Carbon Steel Standard Pipe from
Turkey
Import Administration,
International Trade Administration,
Department of Commerce.
SUMMARY: As a result of the
determinations by the Department of
Commerce (the Department) and the
International Trade Commission (ITC)
that revocation of the antidumping duty
orders on circular welded non–alloy
pipe and tube from Brazil, Mexico, and
Republic of Korea (Korea), and
antidumping duty orders on welded
carbon steel pipe from India, Thailand
and Turkey, and countervailing duty
order on welded carbon steel standard
pipe from Turkey, would likely lead to
continuation or recurrence of dumping
and countervailable subsidies, and
material injury to an industry in the
United States, the Department is
publishing notice of continuation of
these antidumping and countervailing
duty orders.
EFFECTIVE DATE: August 8, 2006.
CONTACT INFORMATION: Martha Douthit
or Dana Mermelstein, AD/CVD
Operations, Office 6, Import
Administration, International Trade
Administration, U.S. Department of
Commerce, 14th Street and Constitution
Avenue, NW., Washington, DC 20230;
telephone:(202) 482–5050 or (202) 482–
1391, respectively.
SUPPLEMENTARY INFORMATION:
AGENCY:
Scope of the Orders
Certain Circular Welded Non–Alloy Pipe
and Tube from Brazil, Mexico and
Korea - (A–351–809)(A–201–805)(A–
580–809)
The products covered by these orders
are circular welded non–alloy steel
pipes and tubes, of circular cross–
section, not more than 406.4 millimeters
(16 inches) in outside diameter,
regardless of wall thickness, surface
finish (black, galvanized, or painted), or
end finish (plain end, beveled end,
threaded, or threaded and coupled).
These pipes and tubes are generally
known as standard pipes and tubes and
are intended for the low pressure
E:\FR\FM\08AUN1.SGM
08AUN1
Federal Register / Vol. 71, No. 152 / Tuesday, August 8, 2006 / Notices
and for protection of electrical wiring,
such as conduit shells. The scope is not
limited to standard pipe and fence
tubing, or those types of mechanical and
structural pipe that are used in standard
pipe applications. All carbon steel pipes
and tubes within the physical
description outlined above are included
in the scope of these orders, except for
line pipe, oil country tubular goods,
boiler tubing, cold–drawn or cold–
rolled mechanical tubing, pipe and tube
hollows for redraws, finished
scaffolding, and finished rigid
conduit. Imports of these products are
currently classifiable under the
following HTSUS subheadings:
7306.30.10.00, 7306.30.50.25,
7306.30.50.32, 7306.30.50.40,
7306.30.50.55, 7306.30.50.85, and
7306.30.50.90. Although the HTSUS
subheadings are provided for
convenience and customs purposes, our
written description of the scope of these
proceedings are dispositive.
jlentini on PROD1PC65 with NOTICES
conveyance of water, steam, natural gas,
and other liquids and gases in plumbing
and heating systems, air conditioning
units, automatic sprinkler systems, and
other related uses, and generally meet
ASTM A–53 specifications. Standard
pipe may also be used for light load–
bearing applications, such as for fence
tubing, and as structural pipe tubing
used for framing and support members
for reconstruction or load–bearing
purposes in the construction,
shipbuilding, trucking, farm equipment,
and related industries. Unfinished
conduit pipe is also included in these
orders.
All carbon steel pipes and tubes
within the physical description outlined
above are included within the scope of
these orders, except line pipe, oil
country tubular goods, boiler tubing,
mechanical tubing, pipe and tube
hollows for redraws, finished
scaffolding, and finished conduit.
Standard pipe that is dual or triple
certified/stenciled that enters the United
States as line pipe of a kind used for oil
or gas pipelines is also not included in
this order. Imports of the products
covered by these orders are currently
classifiable under the following
Harmonized Tariff Schedule of the
United States (HTSUS) subheadings:
7306.30.10.00, 7306.30.50.25,
7306.30.50.32, 7306.30.50.40,
7306.30.50.55, 7306.30.50.85, and
7306.30.50.90.
Although the HTSUS subheadings are
provided for convenience and customs
purposes, our written description of the
scope of these proceedings is
dispositive.
Certain Welded Carbon Steel Pipe and
Tube from Turkey - (C–489–502)
The merchandise subject to this
countervailing duty order is certain
welded carbon steel pipe and tube with
an outside diameter of 0.375 inch or
more, but not over 16 inches, of any
wall thickness (‘‘pipe and tube’’). These
products are currently provided for
under the HTSUS as item numbers
7306.30.10, 7306.30.50, and 7306.90.10.
Although the HTSUS subheadings are
provided for convenience and customs
purposes, the written description of the
merchandise subject to this order is
dispositive.
Certain Welded Carbon Steel Standard
Pipe and Tube from India, Thailand
and Turkey - (A–533–502)(A–549–
502)(A–489–501)
The products covered by these orders
include circular welded non–alloy steel
pipes and tubes, of circular cross–
section, not more than 406.4 millimeters
(16 inches) in outside diameter,
regardless of wall thickness, surface
finish (black, or galvanized, painted), or
end finish (plain end, beveled end,
threaded and coupled). Those pipes and
tubes are generally known as standard
pipe, though they may also be called
structural or mechanical tubing in
certain applications. Standard pipes and
tubes are intended for the low pressure
conveyance of water, steam, natural gas,
air, and other liquids and gases in
plumbing and heating systems, air
conditioner units, automatic sprinkler
systems, and other related uses.
Standard pipe may also be used for light
load–bearing and mechanical
applications, such as for fence tubing,
Background
On July 5, 2005, the Department
initiated and the ITC instituted sunset
reviews of the antidumping duty orders
on circular welded non–alloy pipe and
tube from Brazil, Mexico, and Korea,
antidumping duty orders on welded
carbon steel pipe from India, Thailand
and Turkey, and countervailing duty
order on welded carbon steel standard
pipe from Turkey, pursuant to section
751(c) of the Tariff Act of 1930, as
amended (‘‘the Act’’). See Initiation of
Five–Year (‘‘Sunset’’) Reviews; 70 FR
38101 (July 1, 2005), and ITC notice of
institution on Certain Pipe and Tube
From Argentina, Brazil, India, Korea,
Mexico, Taiwan, Thailand, and Turkey;
70 FR 38204 (July 1, 2005)
As a result of its review, the
Department found that revocation of the
antidumping and countervailing duty
orders would likely lead to continuation
or recurrence of dumping and
countervailable subsidies, and notified
the ITC of the magnitude of the margins
VerDate Aug<31>2005
20:06 Aug 07, 2006
Jkt 208001
PO 00000
Frm 00004
Fmt 4703
Sfmt 4703
44997
and the net countervailable subsidies
likely to prevail were the orders to be
revoked. See Certain Circular Welded
Carbon Steel Pipes and Tubes from
India, Taiwan, Thailand, and Turkey,
and Circular Welded Non–Alloy Steel
Pipe from Brazil, Republic of Korea,
Mexico, and Taiwan; Notice of Final
Results of Expedited Five–Year
(‘‘Sunset’’) Reviews of Antidumping
Duty Orders; 70 FR 67662 (November 8,
2005), and Final Results of Expedited
Sunset Review: Welded Carbon Steel
Standard Pipe from Turkey; 70 FR
62097 (October 28, 2005).
On July 25, 2006, the ITC determined,
pursuant to section 751(c) of the Act,
that revocation of the antidumping duty
orders on circular welded non–alloy
pipe and tube from Brazil, Mexico,
Korea, the antidumping duty orders on
welded carbon steel pipe from India,
Thailand and Turkey, and the
countervailing duty order on welded
carbon steel standard pipe from Turkey,
would likely lead to continuation or
recurrence of material injury to an
industry in the United States within a
reasonably foreseeable time. See Certain
Pipe and Tube from Argentina, Brazil,
India, Korea, Mexico, Taiwan, Thailand,
and Turkey; 71 FR 42118 (July 25,
2006), and USITC Publication 3867 (July
2006), (Inv. Nos. 701–TA–253 and 731–
TA–132, 252, 271, 409–410, 532–534,
and 536) (Second Review)).
As a result of the determinations by
the Department and the ITC that
revocation of these antidumping and
countervailing duty orders would likely
lead to continuation or recurrence of
dumping and countervailable subsidies,
and material injury to an industry in the
United States, pursuant to section
751(d)(2) of the Act, the Department
hereby orders the continuation of the
antidumping duty orders on circular
welded non–alloy pipes and tubes from
Brazil, Mexico, and Korea, the
antidumping duty orders on welded
carbon steel pipes from India, Thailand
and Turkey, and the countervailing duty
order on welded carbon steels standard
pipes from Turkey.
U.S. Customs and Border Protection
(CBP) will continue to collect
antidumping and countervailing duty
cash deposits at the rates in effect at the
time of entry for all imports of subject
merchandise.
The effective date of continuation of
these orders will be the date of
publication in the Federal Register of
this Notice of Continuation. Pursuant to
sections 751(c)(2) and 751(c)(6)(A) of
the Act, the Department intends to
initiate the next five–year reviews of
these orders not later than July 2011.
E:\FR\FM\08AUN1.SGM
08AUN1
44998
Federal Register / Vol. 71, No. 152 / Tuesday, August 8, 2006 / Notices
These five–year (sunset) reviews and
notice are in accordance with section
751(c) of the Act and published
pursuant to section 777(i)(1) of the Act.
Dated: July 31, 2006.
David M. Spooner,
Assistant Secretary for Import
Administration.
[FR Doc. E6–12794 Filed 8–7–06; 8:45 am]
BILLING CODE 3510–DS–S
DEPARTMENT OF COMMERCE
International Trade Administration
(A–570–827)
Notice of Amended Final Results of
Antidumping Duty Administrative
Review: Certain Cased Pencils from
the People’s Republic of China
Import Administration,
International Trade Administration,
Department of Commerce.
SUMMARY: The Department of Commerce
(the Department) published the final
results and partial rescission of the
administrative review of the
antidumping duty order on certain
cased pencils from the People’s
Republic of China covering the period of
review (POR) December 1, 2003,
through November 30, 2004, on July 6,
2006. See Certain Cased Pencils From
the People’s Republic of China; Final
Results and Partial Rescission of
Antidumping Duty Administrative
Review, 71 FR 38366 (July 6, 2006)
(Final Results). We are amending our
final results to correct a ministerial error
alleged by China First Pencil Co., Ltd./
Shanghai Three Star Stationery Industry
Corp. (CFP/Three Star) pursuant to
section 751(h) of the Tariff Act of 1930,
as amended (the Act).
EFFECTIVE DATE: August 8, 2006.
FOR FURTHER INFORMATION CONTACT: Paul
Stolz or Charles Riggle, AD/CVD
Operations, Office 8, Import
AGENCY:
Administration, International Trade
Administration, U.S. Department of
Commerce, 14th Street and Constitution
Avenue, NW, Washington, DC 20230;
telephone: (202) 482–4474 and (202)
482–0650, respectively.
SUPPLEMENTARY INFORMATION:
wood encasing one–and-one half inches
of sharpened lead on one end and a
rubber eraser on the other end.
Although the HTSUS subheading is
provided for convenience and customs
purposes, our written description of the
scope of the order is dispositive.
Scope of the Order
Imports covered by this order are
shipments of certain cased pencils of
any shape or dimension (except as
noted below) which are writing and/or
drawing instruments that feature cores
of graphite or other materials, encased
in wood and/or man–made materials,
whether or not decorated and whether
or not tipped (e.g., with erasers, etc.) in
any fashion, and either sharpened or
unsharpened. The pencils subject to the
order are currently classifiable under
subheading 9609.10.00 of the
Harmonized Tariff Schedule of the
United States (HTSUS). Specifically
excluded from the scope of the order are
mechanical pencils, cosmetic pencils,
pens, non–cased crayons (wax), pastels,
charcoals, chalks, and pencils produced
under U.S. patent number 6,217,242,
from paper infused with scents by the
means covered in the above–referenced
patent, thereby having odors distinct
from those that may emanate from
pencils lacking the scent infusion. Also
excluded from the scope of the order are
pencils with all of the following
physical characteristics: 1) length: 13.5
or more inches; 2) sheath diameter: not
less than one–and-one quarter inches at
any point (before sharpening); and 3)
core length: not more than 15 percent of
the length of the pencil.
In addition, pencils with all of the
following physical characteristics are
excluded from the scope of the order:
novelty jumbo pencils that are octagonal
in shape, approximately ten inches long,
one inch in diameter before sharpening,
and three–and-one eighth inches in
circumference, composed of turned
Amended Final Results
In accordance with section 751(a) the
Act, on July 6, 2006, the Department
published its final results and partial
rescission of the administrative review
of certain cased pencils from the
People’s Republic of China. See Final
Results.
On July 10, 2006, CFP/Three Star
submitted a ministerial error allegation
with respect to the final results of
administrative review. No other
interested party submitted ministerial
error allegations. No party submitted
comments on the ministerial error
allegation submitted by CFP/Three Star.
In accordance with section 751(h) of the
Act, we have determined that a
ministerial error was made in the
calculation of the final margin for CFP/
Three Star. See Memorandum from
Charles Riggle, Program Manager, AD/
CVD Operations, Office 8, to Wendy J.
Frankel, Director, AD/CVD Operations,
Office 8: Antidumping Duty
Administrative Review of Certain Cased
Pencils from the People’s Republic of
China, Allegation of Ministerial Error
(July 28, 2006). Pursuant to section
751(h) of the Act, we have corrected the
error and are amending the final results
of review accordingly. See
Memorandum from Paul Stolz, Case
Analyst through Charles Riggle, Program
Manager, to the File, Analysis
Memorandum for Amended Final
Results for China First Pencil Co., Ltd./
Shanghai Three Star Stationery Industry
Corp. (July 28, 2006). The revised final
weighted–average dumping margin is as
follows:
Original Weighted–Average
Margin Percentage
Exporter/Manufacturer
jlentini on PROD1PC65 with NOTICES
China First Pencil Co., Ltd./Shanghai Three Star Stationery Industry Corp. .....
The Department shall determine, and
CBP shall assess, antidumping duties on
all appropriate entries based on the
amended final results. For details on the
assessment of antidumping duties on all
appropriate entries, see Final Results.
This notice is published pursuant to
section 777(i) of the Act and 19 CFR
351.224(e).
VerDate Aug<31>2005
20:06 Aug 07, 2006
Jkt 208001
26.62
July 28, 2006.
David M. Spooner,
Assistant Secretary for Import
Administration.
[FR Doc. E6–12818 Filed 8–7–06; 8:45 am]
BILLING CODE 3510–DS–S
PO 00000
Amended Weighted–Average
Margin Percentage
DEPARTMENT OF COMMERCE
International Trade Administration
(A–821–807)
Final Results of Expedited Sunset
Review: Ferrovanadium and Nitrided
Vanadium from Russia
Import Administration,
International Trade Administration,
Department of Commerce.
AGENCY:
Frm 00005
Fmt 4703
Sfmt 4703
2.76
E:\FR\FM\08AUN1.SGM
08AUN1
Agencies
[Federal Register Volume 71, Number 152 (Tuesday, August 8, 2006)]
[Notices]
[Pages 44996-44998]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: E6-12794]
-----------------------------------------------------------------------
DEPARTMENT OF COMMERCE
International Trade Administration
(A-351-809, A-201-805, A-580-809, A-533-502, A-549-502, A-489-501, C-
489-502)
Continuation of Antidumping Duty Orders on Circular Welded Non-
Alloy Pipes and Tubes from Brazil, Mexico, Republic of Korea,
Antidumping Duty Orders on Welded Carbon Steel Pipe from India,
Thailand and Turkey, and Countervailing Duty Order on Welded Carbon
Steel Standard Pipe from Turkey
AGENCY: Import Administration, International Trade Administration,
Department of Commerce.
SUMMARY: As a result of the determinations by the Department of
Commerce (the Department) and the International Trade Commission (ITC)
that revocation of the antidumping duty orders on circular welded non-
alloy pipe and tube from Brazil, Mexico, and Republic of Korea (Korea),
and antidumping duty orders on welded carbon steel pipe from India,
Thailand and Turkey, and countervailing duty order on welded carbon
steel standard pipe from Turkey, would likely lead to continuation or
recurrence of dumping and countervailable subsidies, and material
injury to an industry in the United States, the Department is
publishing notice of continuation of these antidumping and
countervailing duty orders.
EFFECTIVE DATE: August 8, 2006.
CONTACT INFORMATION: Martha Douthit or Dana Mermelstein, AD/CVD
Operations, Office 6, Import Administration, International Trade
Administration, U.S. Department of Commerce, 14th Street and
Constitution Avenue, NW., Washington, DC 20230; telephone:(202) 482-
5050 or (202) 482-1391, respectively.
SUPPLEMENTARY INFORMATION:
Scope of the Orders
Certain Circular Welded Non-Alloy Pipe and Tube from Brazil, Mexico and
Korea - (A-351-809)(A-201-805)(A-580-809)
The products covered by these orders are circular welded non-alloy
steel pipes and tubes, of circular cross-section, not more than 406.4
millimeters (16 inches) in outside diameter, regardless of wall
thickness, surface finish (black, galvanized, or painted), or end
finish (plain end, beveled end, threaded, or threaded and coupled).
These pipes and tubes are generally known as standard pipes and tubes
and are intended for the low pressure
[[Page 44997]]
conveyance of water, steam, natural gas, and other liquids and gases in
plumbing and heating systems, air conditioning units, automatic
sprinkler systems, and other related uses, and generally meet ASTM A-53
specifications. Standard pipe may also be used for light load-bearing
applications, such as for fence tubing, and as structural pipe tubing
used for framing and support members for reconstruction or load-bearing
purposes in the construction, shipbuilding, trucking, farm equipment,
and related industries. Unfinished conduit pipe is also included in
these orders.
All carbon steel pipes and tubes within the physical description
outlined above are included within the scope of these orders, except
line pipe, oil country tubular goods, boiler tubing, mechanical tubing,
pipe and tube hollows for redraws, finished scaffolding, and finished
conduit.
Standard pipe that is dual or triple certified/stenciled that
enters the United States as line pipe of a kind used for oil or gas
pipelines is also not included in this order. Imports of the products
covered by these orders are currently classifiable under the following
Harmonized Tariff Schedule of the United States (HTSUS) subheadings:
7306.30.10.00, 7306.30.50.25, 7306.30.50.32, 7306.30.50.40,
7306.30.50.55, 7306.30.50.85, and 7306.30.50.90.
Although the HTSUS subheadings are provided for convenience and
customs purposes, our written description of the scope of these
proceedings is dispositive.
Certain Welded Carbon Steel Standard Pipe and Tube from India, Thailand
and Turkey - (A-533-502)(A-549-502)(A-489-501)
The products covered by these orders include circular welded non-
alloy steel pipes and tubes, of circular cross-section, not more than
406.4 millimeters (16 inches) in outside diameter, regardless of wall
thickness, surface finish (black, or galvanized, painted), or end
finish (plain end, beveled end, threaded and coupled). Those pipes and
tubes are generally known as standard pipe, though they may also be
called structural or mechanical tubing in certain applications.
Standard pipes and tubes are intended for the low pressure conveyance
of water, steam, natural gas, air, and other liquids and gases in
plumbing and heating systems, air conditioner units, automatic
sprinkler systems, and other related uses. Standard pipe may also be
used for light load-bearing and mechanical applications, such as for
fence tubing, and for protection of electrical wiring, such as conduit
shells. The scope is not limited to standard pipe and fence tubing, or
those types of mechanical and structural pipe that are used in standard
pipe applications. All carbon steel pipes and tubes within the physical
description outlined above are included in the scope of these orders,
except for line pipe, oil country tubular goods, boiler tubing, cold-
drawn or cold-rolled mechanical tubing, pipe and tube hollows for
redraws, finished
scaffolding, and finished rigid conduit. Imports of these products
are currently classifiable under the following HTSUS subheadings:
7306.30.10.00, 7306.30.50.25, 7306.30.50.32, 7306.30.50.40,
7306.30.50.55, 7306.30.50.85, and 7306.30.50.90. Although the HTSUS
subheadings are provided for convenience and customs purposes, our
written description of the scope of these proceedings are dispositive.
Certain Welded Carbon Steel Pipe and Tube from Turkey - (C-489-502)
The merchandise subject to this countervailing duty order is
certain welded carbon steel pipe and tube with an outside diameter of
0.375 inch or more, but not over 16 inches, of any wall thickness
(``pipe and tube''). These products are currently provided for under
the HTSUS as item numbers 7306.30.10, 7306.30.50, and 7306.90.10.
Although the HTSUS subheadings are provided for convenience and customs
purposes, the written description of the merchandise subject to this
order is dispositive.
Background
On July 5, 2005, the Department initiated and the ITC instituted
sunset reviews of the antidumping duty orders on circular welded non-
alloy pipe and tube from Brazil, Mexico, and Korea, antidumping duty
orders on welded carbon steel pipe from India, Thailand and Turkey, and
countervailing duty order on welded carbon steel standard pipe from
Turkey, pursuant to section 751(c) of the Tariff Act of 1930, as
amended (``the Act''). See Initiation of Five-Year (``Sunset'')
Reviews; 70 FR 38101 (July 1, 2005), and ITC notice of institution on
Certain Pipe and Tube From Argentina, Brazil, India, Korea, Mexico,
Taiwan, Thailand, and Turkey; 70 FR 38204 (July 1, 2005)
As a result of its review, the Department found that revocation of
the antidumping and countervailing duty orders would likely lead to
continuation or recurrence of dumping and countervailable subsidies,
and notified the ITC of the magnitude of the margins and the net
countervailable subsidies likely to prevail were the orders to be
revoked. See Certain Circular Welded Carbon Steel Pipes and Tubes from
India, Taiwan, Thailand, and Turkey, and Circular Welded Non-Alloy
Steel Pipe from Brazil, Republic of Korea, Mexico, and Taiwan; Notice
of Final Results of Expedited Five-Year (``Sunset'') Reviews of
Antidumping Duty Orders; 70 FR 67662 (November 8, 2005), and Final
Results of Expedited Sunset Review: Welded Carbon Steel Standard Pipe
from Turkey; 70 FR 62097 (October 28, 2005).
On July 25, 2006, the ITC determined, pursuant to section 751(c) of
the Act, that revocation of the antidumping duty orders on circular
welded non-alloy pipe and tube from Brazil, Mexico, Korea, the
antidumping duty orders on welded carbon steel pipe from India,
Thailand and Turkey, and the countervailing duty order on welded carbon
steel standard pipe from Turkey, would likely lead to continuation or
recurrence of material injury to an industry in the United States
within a reasonably foreseeable time. See Certain Pipe and Tube from
Argentina, Brazil, India, Korea, Mexico, Taiwan, Thailand, and Turkey;
71 FR 42118 (July 25, 2006), and USITC Publication 3867 (July 2006),
(Inv. Nos. 701-TA-253 and 731-TA-132, 252, 271, 409-410, 532-534, and
536) (Second Review)).
As a result of the determinations by the Department and the ITC
that revocation of these antidumping and countervailing duty orders
would likely lead to continuation or recurrence of dumping and
countervailable subsidies, and material injury to an industry in the
United States, pursuant to section 751(d)(2) of the Act, the Department
hereby orders the continuation of the antidumping duty orders on
circular welded non-alloy pipes and tubes from Brazil, Mexico, and
Korea, the antidumping duty orders on welded carbon steel pipes from
India, Thailand and Turkey, and the countervailing duty order on welded
carbon steels standard pipes from Turkey.
U.S. Customs and Border Protection (CBP) will continue to collect
antidumping and countervailing duty cash deposits at the rates in
effect at the time of entry for all imports of subject merchandise.
The effective date of continuation of these orders will be the date
of publication in the Federal Register of this Notice of Continuation.
Pursuant to sections 751(c)(2) and 751(c)(6)(A) of the Act, the
Department intends to initiate the next five-year reviews of these
orders not later than July 2011.
[[Page 44998]]
These five-year (sunset) reviews and notice are in accordance with
section 751(c) of the Act and published pursuant to section 777(i)(1)
of the Act.
Dated: July 31, 2006.
David M. Spooner,
Assistant Secretary for Import Administration.
[FR Doc. E6-12794 Filed 8-7-06; 8:45 am]
BILLING CODE 3510-DS-S