Certain New Chemicals; Receipt and Status Information, 36085-36088 [E6-9862]
Download as PDF
<![CDATA[
Federal Register / Vol. 71, No. 121 / Friday, June 23, 2006 / Notices
Trimethoxysilyl quats
H. Projected Year of Completion of
Reregistrations
EPA generally is conducting
reregistration in conjunction with
tolerance reassessment, which FFDCA
mandates be completed by August 2006.
EPA plans to meet the statutory
deadline for completing tolerance
reassessment, and in so doing, to
complete reregistration eligibility
decisions for pesticides with tolerances,
as required by PRIA. The Agency
expects to complete remaining
reregistration eligibility decisions for
pesticides with no food uses or
tolerances during FY 2007 and FY 2008
(by October 3, 2008).Product
reregistration, which takes place only
after the reregistration eligibility
decisions have been completed for the
active ingredients, will not likely be
completed before 2012.
List of Subjects
Environmental protection, Pesticides
and pests.
Dated: June 16, 2006.
Susan B. Hazen,
Acting Assistant Administrator, Office of
Prevention, Pesticides and Toxic Substances.
[FR Doc. E6–9956 Filed 6–22–06; 8:45 am]
BILLING CODE 6560–50–S
ENVIRONMENTAL PROTECTION
AGENCY
[EPA–HQ–OPPT–2006–0516; FRL–8073–8]
Certain New Chemicals; Receipt and
Status Information
Environmental Protection
Agency (EPA).
ACTION: Notice.
jlentini on PROD1PC65 with NOTICES
AGENCY:
SUMMARY: Section 5 of the Toxic
Substances Control Act (TSCA) requires
any person who intends to manufacture
(defined by statute to include import) a
new chemical (i.e., a chemical not on
the TSCA Inventory) to notify EPA and
comply with the statutory provisions
pertaining to the manufacture of new
chemicals. Under sections 5(d)(2) and
5(d)(3) of TSCA, EPA is required to
publish a notice of receipt of a
premanufacture notice (PMN) or an
application for a test marketing
exemption (TME), and to publish
periodic status reports on the chemicals
under review and the receipt of notices
of commencement to manufacture those
chemicals. This status report, which
covers the period from May 22, 2006 to
June 2, 2006, consists of the PMNs
pending or expired, and the notices of
VerDate Aug<31>2005
17:22 Jun 22, 2006
Jkt 208001
commencement to manufacture a new
chemical that the Agency has received
under TSCA section 5 during this time
period.
DATES: Comments identified by the
specific PMN number or TME number,
must be received on or before July 24,
2006.
ADDRESSES: Submit your comments,
identified by docket identification (ID)
no. EPA–HQ–OPPT–2006–0516, by one
of the following methods.
• https://www.regulations.gov. Follow
the on-line instructions for submitting
comments.
• Mail: Document Control Office
(7407M), Office of Pollution Prevention
and Toxics (OPPT), Environmental
Protection Agency, 1200 Pennsylvania
Ave., NW., Washington, DC 20460–
0001.
• Hand Delivery: OPPT Document
Control Office (DCO, EPA East Bldg.,
Rm. 6428, 1201 Constitution Ave., NW.,
Washington, DC. Attention: Docket ID
number EPA–HQ–OPPT–2006–0516.
The DCO is open from 8 a.m. to 4 p.m.,
Monday through Friday, excluding legal
holidays. The telephone number for the
DCO is (202) 564–8930. Such deliveries
are only accepted during the Docket’s
normal hours of operation, and special
arrangements should be made for
deliveries of boxed information.
• Instructions: Direct your comments
to docket ID number EPA–HQ–OPPT–
2006–0516. EPA’s policy is that all
comments received will be included in
the public docket without change and
may be made available online at https://
www.regulations.gov, including any
personal information provided, unless
the comment includes information
claimed to be Confidential Business
Information (CBI) or other information
whose disclosure is restricted by statute.
Do not submit information that you
consider to be CBI or otherwise
protected through regulations.gov or email. The regulations.gov website is an
‘‘anonymous access’’ systems, which
means EPA will not know your identity
or contact information unless you
provide it in the body of your comment.
If you send an e-mail comment directly
to EPA without going through
regulations.gov your e-mail address will
be automatically captured and included
as part of the comment that is placed in
the public docket and made available on
the Internet. If you submit an electronic
comment, EPA recommends that you
include your name and other contact
information in the body of your
comment and with any disk or CD ROM
you submit. If EPA cannot read your
comment due to technical difficulties
and cannot contact you for clarification,
PO 00000
Frm 00033
Fmt 4703
Sfmt 4703
36085
EPA may not be able to consider your
comment. Electronic files should avoid
the use of special characters, any form
of encryption, and be free of any defects
or viruses.
Docket: All documents in the docket
are listed in the regulations.gov index.
Although listed in the index, some
information is not publicly available,
i.e., CBI or other information whose
disclosure is restricted by statute.
Certain other material, such as
copyrighted material, is not placed on
the Internet and will be publicly
available only in hard copy form.
Publicly available docket materials are
available electronically through
regulations.gov or in hard copy at the
OPPT Docket, EPA Docket Center (EPA/
DC), EPA West, Room B102, 1301
Constitution Ave., NW., Washington,
DC. The EPA Docket Center Public
Reading Room is open from 8:30 a.m. to
4:30 p.m., Monday through Friday,
excluding legal holidays. The telephone
number for the Public Reading Room is
(202) 566–1744, and the telephone
number for the OPPT Docket is (202)
566–0280.
FOR FURTHER INFORMATION CONTACT:
Colby Lintner, Regulatory Coordinator,
Environmental Assistance Division,
Office of Pollution Prevention and
Toxics (7408M), Environmental
Protection Agency, 1200 Pennsylvania
Ave., NW., Washington, DC 20460–
0001; telephone number: (202) 554–
1404; e-mail address: TSCAHotline@epa.gov.
SUPPLEMENTARY INFORMATION:
I. General Information
A. Does this Action Apply to Me?
This action is directed to the public
in general. As such, the Agency has not
attempted to describe the specific
entities that this action may apply to.
Although others may be affected, this
action applies directly to the submitter
of the premanufacture notices addressed
in the action. If you have any questions
regarding the applicability of this action
to a particular entity, consult the person
listed under FOR FURTHER INFORMATION
CONTACT.
B. What Should I Consider as I Prepare
My Comments for EPA?
1. Submitting CBI. Do not submit this
information to EPA through
regulations.gov or e-mail. Clearly mark
the part or all of the information that
you claim to be CBI. For CBI
information in a disk or CD ROM that
you mail to EPA, mark the outside of the
disk or CD ROM as CBI and then
identify electronically within the disk or
CD ROM the specific information that is
E:\FR\FM\23JNN1.SGM
23JNN1
36086
Federal Register / Vol. 71, No. 121 / Friday, June 23, 2006 / Notices
claimed CBI). In addition to one
complete version of the comment that
includes information claimed as CBI, a
copy of the comment that does not
contain the information claimed as CBI
must be submitted for inclusion in the
public docket. Information so marked
will not be disclosed except in
accordance with procedures set forth in
40 CFR part 2.
2. Tips for preparing your comments.
When submitting comments, remember
to:
i. Identify the document by docket
number and other identifying
information (subject heading, Federal
Register date and page number).
ii. Follow directions—The agency
may ask you to respond to specific
questions or organize comments by
referencing a Code of Federal
Regulations (CFR) part or section
number.
iii. Explain why you agree or disagree;
suggest alternatives and substitute
language for your requested changes.
iv. Describe any assumptions and
provide any technical information and/
or data that you used.
v. If you estimate potential costs or
burdens, explain how you arrived at the
estimate.
vi. Provide specific examples to
illustrate your concerns, and suggested
alternatives.
vii. Explain your views as clearly as
possible, avoiding the use of profanity
or personal threats.
viii. Make sure to submit your
comments by the comment period
deadline identified.
II. Why is EPA Taking this Action?
Section 5 of TSCA requires any
person who intends to manufacture
(defined by statute to include import) a
new chemical (i.e., a chemical not on
the TSCA Inventory to notify EPA and
comply with the statutory provisions
pertaining to the manufacture of new
chemicals. Under sections 5(d)(2) and
5(d)(3) of TSCA, EPA is required to
publish a notice of receipt of a PMN or
an application for a TME and to publish
periodic status reports on the chemicals
under review and the receipt of notices
of commencement to manufacture those
chemicals. This status report, which
covers the period from May 22, 2006 to
June 2, 2006, consists of the PMNs
pending or expired, and the notices of
commencement to manufacture a new
chemical that the Agency has received
under TSCA section 5 during this time
period.
III. Receipt and Status Report for PMNs
This status report identifies the PMNs
pending or expired, and the notices of
commencement to manufacture a new
chemical that the Agency has received
under TSCA section 5 during this time
period. If you are interested in
information that is not included in the
following tables, you may contact EPA
as described in Unit II. to access
additional non-CBI information that
may be available.
In Table I of this unit, EPA provides
the following information (to the extent
that such information is not claimed as
CBI) on the PMNs received by EPA
during this period: the EPA case number
assigned to the PMN; the date the PMN
was received by EPA; the projected end
date for EPA’s review of the PMN; the
submitting manufacturer; the potential
uses identified by the manufacturer in
the PMN; and the chemical identity.
I. 46 PREMANUFACTURE NOTICES RECEIVED FROM: 05/22/06 TO 06/02/06
Case No.
Received
Date
Projected
Notice
End Date
Manufacturer/Importer
Use
Chemical
(G) Ester of fatty acid with bisphenol
a ethoxylate
(G) Methyl propylhexanol
(G) Aliphatic polyester—polyether
polyurethane dispersion
(G) Aromatic thermoplastic polyurethane
(G) Tridecyl phthalate
(G) methyl propylhexanol
(G) Metal complex, copolymer of substituted acrylic acid, substituted
methacrylate, substituted acrylate,
and ethylene glycol substituted acrylate alkyl ether.
(G)
Poly(alkoxy),
.alpha.-[2,2bis(hydroxymethyl)alkyl]-.omega.alkoxy(G)
Substituted
carbomonocycle,
polymer withisocyanate substituted
alkyl carbomonocycle, substituted
alkenoates,
substituted
heteromonocycle, alkanedioic acid,
alkane diol, reaction products with
substituted alkylamine, compounds
with substituted alkanol.
(G) Anionic acrylonitrile-acrylic copolymer dispersion
(G) Substituted trihalomethylpyridine
(G) Quaternized styrene polymer
(G) Quaternized styrene polymer
(G) Substituted trihalomethylpyridine
chloride
05/19/06
08/16/06
CBI
P–06–0539
P–06–0540
05/23/06
05/23/06
08/20/06
08/20/06
CBI
CBI
(G) Surfactant for resins (polymer additives)
(G) Reactant
(G) Open non-dispersive(coating)
P–06–0541
05/23/06
08/20/06
CBI
(G) Open non-dispersive(coating)
P–06–0542
P–06–0543
P–06–0544
05/23/06
05/23/06
05/23/06
08/20/06
08/20/06
08/20/06
CBI
CBI
CBI
(G) Plasticizer
(G) Reactant
(S) Component of antifouling paint
P–06–0545
05/23/06
08/20/06
CBI
(G) Dispersing agent
P–06–0546
05/23/06
08/20/06
Cytec Surface Specialties Inc.
(S) Resin for paints and coatings
P–06–0547
jlentini on PROD1PC65 with NOTICES
P–06–0537
05/23/06
08/20/06
BASF Corporation
(S) Sizing agent
P–06–0548
P–06–0549
P–06–0550
P–06–0551
05/24/06
05/24/06
05/24/06
05/24/06
08/21/06
08/21/06
08/21/06
08/21/06
DOW Agrosciences
CBI
CBI
DOW Agrosciences
(G)
(G)
(G)
(G)
VerDate Aug<31>2005
17:22 Jun 22, 2006
Jkt 208001
PO 00000
Frm 00034
Process intermediate
Open, non-dispersive (resin)
Open, non-dispersive (resin)
Process intermediate
Fmt 4703
Sfmt 4703
E:\FR\FM\23JNN1.SGM
23JNN1
36087
Federal Register / Vol. 71, No. 121 / Friday, June 23, 2006 / Notices
I. 46 PREMANUFACTURE NOTICES RECEIVED FROM: 05/22/06 TO 06/02/06—Continued
Received
Date
Case No.
Projected
Notice
End Date
Manufacturer/Importer
Use
Chemical
(S)
Tricyclo[7.3.3.15,11]heptasiloxane3,7,14-triol,
1,3,5,7,9,11,14heptakis(2-methylpropyl)(G)
Substituted
trihalomethylpyridinethiolate
(G)
Substituted
aminotriazolopyrimidine
(G) Phthalic anhydride polymer with
benzenediamine,
carbonylated
furandion and substituted aniline
(G) Polyoxyalkylenesilane
P–06–0552
05/24/06
08/21/06
Hybrid Plastics, Inc.
(G) Thermoplastic polymer additive
(open, non-dispersive)
P–06–0553
05/24/06
08/21/06
DOW Agrosciences
(G) Process intermediate
P–06–0554
05/24/06
08/21/06
DOW Agrosciences
(G) Process intermediate
P–06–0555
05/25/06
08/22/06
CBI
(G) Coating to make copper laminate
P–06–0556
05/25/06
08/22/06
CBI
P–06–0557
P–06–0558
P–06–0559
P–06–0560
05/25/06
05/25/06
05/30/06
05/30/06
08/22/06
08/22/06
08/27/06
08/27/06
CBI
CBI
CBI
CBI
(S) Dispersing agent for crop protection; dispersing agent for home
care cleaners
(S) Intermediate for dispersing agent
(S) Intermediate for dispersing agent
(G) Prepolymer of polyester urethane
(G) Paper treatment additive
P–06–0561
05/30/06
08/27/06
CBI
(G) Textile treatment additive
P–06–0562
P–06–0563
05/30/06
05/30/06
08/27/06
08/27/06
CBI
CBI
(G) Carpet treatment additive
(G) Textile treatment additive
P–06–0564
05/30/06
08/27/06
CBI
(G) Textile treatment additive
P–06–0565
05/30/06
08/27/06
CBI
(G) Textile treatment additive
P–06–0566
05/30/06
08/27/06
CBI
(G) Textile treatment additive
P–06–0567
P–06–0568
05/30/06
05/30/06
08/27/06
08/27/06
CBI
CBI
(G) Carpet treatment additive
(G) Textile treatment additive
P–06–0569
P–06–0570
05/30/06
05/30/06
08/27/06
08/27/06
CBI
CBI
(G) Textile treatment additive
(G) Textile treatment additive
P–06–0571
05/30/06
08/27/06
CBI
(G) Textile treatment additive
P–06–0572
05/30/06
08/27/06
CBI
(G) Textile treatment additive
P–06–0573
P–06–0574
05/30/06
05/30/06
08/27/06
08/27/06
CBI
CBI
(G) Carpet treatment additive
(G) Tile surface treatment
P–06–0575
P–06–0576
P–06–0577
05/30/06
05/30/06
05/30/06
08/27/06
08/27/06
08/27/06
CBI
CBI
CBI
(G) Paper treatment additive
(G) Textile treatment additive
(G) Paper treatment additive
P–06–0578
P–06–0579
P–06–0580
05/30/06
05/30/06
05/30/06
08/27/06
08/27/06
08/27/06
CBI
CBI
CBI
(G) Paper treatment additive
(G) Textile treatment additive
(G) Textile treatment additive
jlentini on PROD1PC65 with NOTICES
In Table II of this unit, EPA provides
the following information (to the extent
that such information is not claimed as
(G) Silane hydride
(G) Chlorosilane
(G) Aromatic saturated copolyester
(G) Fluoroalkyl methacrylate copolymer
(G) Fluoroalkyl methacrylate copolymer
(G) Fluoroalkyl acrylate copolymer
(G) Fluoroalkyl methacrylate copolymer
(G) Fluoroalkyl methacrylate copolymer
(G) Fluoroalkyl methacrylate copolymer
(G) Fluoroalkyl methacrylate copolymer
(G) Fluoroalkyl acrylate copolymer
(G) Fluoroalkyl methacrylate copolymer
(G) Fluoroalkyl acrylate copolymer
(G) Fluoroalkyl methacrylate copolymer
(G) Fluoroalkyl methacrylate copolymer
(G) Fluoroalkyl methacrylate copolymer
(G) Fluorochemical urethane
(G) Fluoroalkyl methacrylate copolymer
(G) Fluoroalkyl acrylate copolymer
(G) Fluoroalkylacrylate copolymer
(G) Fluoroalkyl methacrylate copolymer
(G) Fluoroalkyl acrylate copolymer
(G) Fluoroalkylacrylate copolymer
(G) Fluoroalkyl acrylate copolymer
CBI) on the Notices of Commencement
to manufacture received:
II. 22 NOTICES OF COMMENCEMENT FROM: 05/22/06 TO 06/2/06
Case No.
P–05–0058
VerDate Aug<31>2005
Received Date
05/22/06
17:22 Jun 22, 2006
Commencement
Notice End Date
05/11/06
Jkt 208001
PO 00000
Chemical
(G) Ether amine phosphonate salt
Frm 00035
Fmt 4703
Sfmt 4703
E:\FR\FM\23JNN1.SGM
23JNN1
36088
Federal Register / Vol. 71, No. 121 / Friday, June 23, 2006 / Notices
II. 22 NOTICES OF COMMENCEMENT FROM: 05/22/06 TO 06/2/06—Continued
Case No.
Commencement
Notice End Date
Received Date
P–05–0062
P–05–0304
05/22/06
05/23/06
05/11/06
05/18/06
P–05–0552
P–05–0722
05/22/06
05/24/06
05/03/06
04/28/06
P–05–0835
P–06–0038
P–06–0085
05/19/06
05/24/06
05/30/06
05/09/06
04/30/06
05/19/06
P–06–0104
P–06–0157
P–06–0158
P–06–0159
P–06–0160
P–06–0161
P–06–0174
P–06–0244
P–06–0245
05/24/06
05/19/06
05/19/06
05/19/06
05/19/06
05/19/06
05/30/06
05/30/06
05/25/06
04/10/06
04/12/06
04/12/06
04/12/06
04/12/06
04/12/06
05/17/06
05/14/06
05/10/06
P–06–0271
P–06–0292
P–06–0296
05/31/06
05/19/06
05/19/06
05/22/06
05/11/06
05/13/06
P–06–0301
P–93–0999
05/19/06
05/24/06
05/16/06
04/27/06
List of Subjects
Environmental protection, Chemicals,
Premanufacturer notices.
Dated: June 8, 2006.
LaRona M. Washington,
Acting Director, Information Management
Division, Office of Pollution Prevention and
Toxics.
[FR Doc. E6–9862 Filed 6–22–06; 8:45 am]
Chemical
(G) Ether amine phosphonate salt
(S)
2,4,8,10-tetraoxaspiro[5.5]undecane-3,9-diethanol,
.beta.,.beta.,.beta.’,.beta.’-tetramethyl(G) Aromatic polyurethane polymer
(G) Carbon black, hydroxy- and 4-[[2-(sulfooxy)ethyl]substituted]phenyl-modified, sodium salt
(G) Vinyl homopolymer, salt
(S) Starch, polymer with 2-propenenitrile, hydrolyzed, potassium salts
(G)
(substituted)-benzenecarboxylic
acid,2,2′-[(substituted)
bis[imino(substituted)-azo]] bis-,tetramethyl ester
(G) Substituted sulfonated phenyl azo naphthalene
(G) Organic acid salt of an alkylalkanolamine
(G) Organic acid salt of an alkylalkanolamine
(G) Organic acid salt of an alkylalkanolamine ethoxylate
(G) Organic acid salt of an ethoxylated alkanolamine
(G) Organic acid salt of an alkanolamine
(G) Amine salt of an organic acid
(G) Isocyanate functional polyester polyether urethane polymer
(G) Siloxanes and silicones, di-me, 3-hydroxypropyl me, ethers with
polyalkylene glycol mono[2-hydroxy-3-[[6-(oxiranylalkoxy)alkyl]oxy]alkyl alkylcarbomonocyclicdicarboxylate]
(S) Oils, agathosma ovata
(G) Olefinic carbamate
(G) Naphthalenesulfonic acid azo substituted naphthalenesulfonic acid amino
substituted triazine amino substituted phenyl azo phenyl sulfonyl compound
(G) Modified anionic polyacrylamide
(G) Modified polymer of alkenoic esters and styrene
encouraged to comment on any part of
the technical bulletin. Written
comments are requested by June 30,
2006, and should be sent to:
Wendy M. Comes, Executive Director,
Federal Accounting Standards Advisory
Board, 441 G Street, NW., Suite 6814,
Mail Stop 6K17V, Washington, DC
20548.
BILLING CODE 6560–50–S
FOR FURTHER INFORMATION CONTACT:
FEDERAL ACCOUNTING STANDARDS
ADVISORY BOARD
Wendy Comes, Executive Director, 441
G Street, NW., Mail Stop 6K17V,
Washington, DC 20548, or call (202)
512–7350.
Authority: Federal Advisory Committee
Act. Public Law No. 92–463.
jlentini on PROD1PC65 with NOTICES
Notice of Issuance of Technical
Bulletin 2006–1
Board Action: Pursuant to the Federal
Advisory Committee Act (Pub. L. No.
92–463), as amended, and the FASAB
Rules Of Procedure, as amended in
April, 2004, notice is hereby given that
the Federal Accounting Standards
Advisory Board has issued Technical
Bulletin 2006–1, Recognition and
Measurement of Asbestos-Related
Cleanup Costs.
The proposed Technical Bulletin is
intended to clarify the required
reporting of liabilities and related
expenses arising from friable and nonfriable asbestos-related cleanup costs.
The Technical Bulletin is available on
the FASAB Web site at https://
www.fasab.gov/exposure.html, or by
calling 202–512–7350. Respondents are
VerDate Aug<31>2005
17:22 Jun 22, 2006
Jkt 208001
Beach, Florida, is revised to read as
follows:
B. Federal Reserve Bank of Atlanta
(Andre Anderson, Vice President) 1000
Peachtree Street, N.E., Atlanta, Georgia
30309:
1. H Financial of Florida, Inc., St.
Augustine, Florida; to become a bank
holding company by acquiring 100
percent of the voting shares of Haven
Trust Bank, St. Augustine, Florida.
Comments on this application must
be received by July 13, 2006.
Dated: June 20, 2006.
Charles Jackson,
Federal Register Liaison Officer.
[FR Doc. 06–5630 Filed 6–22–06; 8:45 am]
Board of Governors of the Federal Reserve
System, June 20, 2006.
Jennifer J. Johnson,
Secretary of the Board.
[FR Doc. E6–9937 Filed 6–22–06; 8:45 am]
BILLING CODE 6210–01–S
FEDERAL TRADE COMMISSION
BILLING CODE 1610–01–M
Agency Information Collection
Activities; Comment Request
FEDERAL RESERVE SYSTEM
Formations of, Acquisitions by, and
Mergers of Bank Holding Companies;
Correction
This notice corrects a notice (FR Doc.
E6–9483) published on page 35272 of
the issue for Monday, June 19, 2006.
Under the Federal Reserve Bank of
Atlanta heading, the entry for H
Financial of Florida, Inc., Ponte Vedra
PO 00000
Frm 00036
Fmt 4703
Sfmt 4703
Federal Trade Commission
(‘‘Commission’’ or ‘‘FTC’’).
ACTION: Notice.
AGENCY:
SUMMARY: The FTC intends to conduct
consumer research to examine the
effectiveness of the FTC’s current energy
labeling requirements for consumer
products and obtain information about
alternatives to those labels. This activity
is part of the Commission’s efforts to
E:\FR\FM\23JNN1.SGM
23JNN1
]]>Agencies
[Federal Register Volume 71, Number 121 (Friday, June 23, 2006)]
[Notices]
[Pages 36085-36088]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: E6-9862]
-----------------------------------------------------------------------
ENVIRONMENTAL PROTECTION AGENCY
[EPA-HQ-OPPT-2006-0516; FRL-8073-8]
Certain New Chemicals; Receipt and Status Information
AGENCY: Environmental Protection Agency (EPA).
ACTION: Notice.
-----------------------------------------------------------------------
SUMMARY: Section 5 of the Toxic Substances Control Act (TSCA) requires
any person who intends to manufacture (defined by statute to include
import) a new chemical (i.e., a chemical not on the TSCA Inventory) to
notify EPA and comply with the statutory provisions pertaining to the
manufacture of new chemicals. Under sections 5(d)(2) and 5(d)(3) of
TSCA, EPA is required to publish a notice of receipt of a
premanufacture notice (PMN) or an application for a test marketing
exemption (TME), and to publish periodic status reports on the
chemicals under review and the receipt of notices of commencement to
manufacture those chemicals. This status report, which covers the
period from May 22, 2006 to June 2, 2006, consists of the PMNs pending
or expired, and the notices of commencement to manufacture a new
chemical that the Agency has received under TSCA section 5 during this
time period.
DATES: Comments identified by the specific PMN number or TME number,
must be received on or before July 24, 2006.
ADDRESSES: Submit your comments, identified by docket identification
(ID) no. EPA-HQ-OPPT-2006-0516, by one of the following methods.
https://www.regulations.gov. Follow the on-line
instructions for submitting comments.
Mail: Document Control Office (7407M), Office of Pollution
Prevention and Toxics (OPPT), Environmental Protection Agency, 1200
Pennsylvania Ave., NW., Washington, DC 20460-0001.
Hand Delivery: OPPT Document Control Office (DCO, EPA East
Bldg., Rm. 6428, 1201 Constitution Ave., NW., Washington, DC.
Attention: Docket ID number EPA-HQ-OPPT-2006-0516. The DCO is open from
8 a.m. to 4 p.m., Monday through Friday, excluding legal holidays. The
telephone number for the DCO is (202) 564-8930. Such deliveries are
only accepted during the Docket's normal hours of operation, and
special arrangements should be made for deliveries of boxed
information.
Instructions: Direct your comments to docket ID number
EPA-HQ-OPPT-2006-0516. EPA's policy is that all comments received will
be included in the public docket without change and may be made
available online at https://www.regulations.gov, including any personal
information provided, unless the comment includes information claimed
to be Confidential Business Information (CBI) or other information
whose disclosure is restricted by statute. Do not submit information
that you consider to be CBI or otherwise protected through
regulations.gov or e-mail. The regulations.gov website is an
``anonymous access'' systems, which means EPA will not know your
identity or contact information unless you provide it in the body of
your comment. If you send an e-mail comment directly to EPA without
going through regulations.gov your e-mail address will be automatically
captured and included as part of the comment that is placed in the
public docket and made available on the Internet. If you submit an
electronic comment, EPA recommends that you include your name and other
contact information in the body of your comment and with any disk or CD
ROM you submit. If EPA cannot read your comment due to technical
difficulties and cannot contact you for clarification, EPA may not be
able to consider your comment. Electronic files should avoid the use of
special characters, any form of encryption, and be free of any defects
or viruses.
Docket: All documents in the docket are listed in the
regulations.gov index. Although listed in the index, some information
is not publicly available, i.e., CBI or other information whose
disclosure is restricted by statute. Certain other material, such as
copyrighted material, is not placed on the Internet and will be
publicly available only in hard copy form. Publicly available docket
materials are available electronically through regulations.gov or in
hard copy at the OPPT Docket, EPA Docket Center (EPA/DC), EPA West,
Room B102, 1301 Constitution Ave., NW., Washington, DC. The EPA Docket
Center Public Reading Room is open from 8:30 a.m. to 4:30 p.m., Monday
through Friday, excluding legal holidays. The telephone number for the
Public Reading Room is (202) 566-1744, and the telephone number for the
OPPT Docket is (202) 566-0280.
FOR FURTHER INFORMATION CONTACT: Colby Lintner, Regulatory Coordinator,
Environmental Assistance Division, Office of Pollution Prevention and
Toxics (7408M), Environmental Protection Agency, 1200 Pennsylvania
Ave., NW., Washington, DC 20460-0001; telephone number: (202) 554-1404;
e-mail address: TSCA-Hotline@epa.gov.
SUPPLEMENTARY INFORMATION:
I. General Information
A. Does this Action Apply to Me?
This action is directed to the public in general. As such, the
Agency has not attempted to describe the specific entities that this
action may apply to. Although others may be affected, this action
applies directly to the submitter of the premanufacture notices
addressed in the action. If you have any questions regarding the
applicability of this action to a particular entity, consult the person
listed under FOR FURTHER INFORMATION CONTACT.
B. What Should I Consider as I Prepare My Comments for EPA?
1. Submitting CBI. Do not submit this information to EPA through
regulations.gov or e-mail. Clearly mark the part or all of the
information that you claim to be CBI. For CBI information in a disk or
CD ROM that you mail to EPA, mark the outside of the disk or CD ROM as
CBI and then identify electronically within the disk or CD ROM the
specific information that is
[[Page 36086]]
claimed CBI). In addition to one complete version of the comment that
includes information claimed as CBI, a copy of the comment that does
not contain the information claimed as CBI must be submitted for
inclusion in the public docket. Information so marked will not be
disclosed except in accordance with procedures set forth in 40 CFR part
2.
2. Tips for preparing your comments. When submitting comments,
remember to:
i. Identify the document by docket number and other identifying
information (subject heading, Federal Register date and page number).
ii. Follow directions--The agency may ask you to respond to
specific questions or organize comments by referencing a Code of
Federal Regulations (CFR) part or section number.
iii. Explain why you agree or disagree; suggest alternatives and
substitute language for your requested changes.
iv. Describe any assumptions and provide any technical information
and/or data that you used.
v. If you estimate potential costs or burdens, explain how you
arrived at the estimate.
vi. Provide specific examples to illustrate your concerns, and
suggested alternatives.
vii. Explain your views as clearly as possible, avoiding the use of
profanity or personal threats.
viii. Make sure to submit your comments by the comment period
deadline identified.
II. Why is EPA Taking this Action?
Section 5 of TSCA requires any person who intends to manufacture
(defined by statute to include import) a new chemical (i.e., a chemical
not on the TSCA Inventory to notify EPA and comply with the statutory
provisions pertaining to the manufacture of new chemicals. Under
sections 5(d)(2) and 5(d)(3) of TSCA, EPA is required to publish a
notice of receipt of a PMN or an application for a TME and to publish
periodic status reports on the chemicals under review and the receipt
of notices of commencement to manufacture those chemicals. This status
report, which covers the period from May 22, 2006 to June 2, 2006,
consists of the PMNs pending or expired, and the notices of
commencement to manufacture a new chemical that the Agency has received
under TSCA section 5 during this time period.
III. Receipt and Status Report for PMNs
This status report identifies the PMNs pending or expired, and the
notices of commencement to manufacture a new chemical that the Agency
has received under TSCA section 5 during this time period. If you are
interested in information that is not included in the following tables,
you may contact EPA as described in Unit II. to access additional non-
CBI information that may be available.
In Table I of this unit, EPA provides the following information (to
the extent that such information is not claimed as CBI) on the PMNs
received by EPA during this period: the EPA case number assigned to the
PMN; the date the PMN was received by EPA; the projected end date for
EPA's review of the PMN; the submitting manufacturer; the potential
uses identified by the manufacturer in the PMN; and the chemical
identity.
I. 46 Premanufacture Notices Received From: 05/22/06 to 06/02/06
--------------------------------------------------------------------------------------------------------------------------------------------------------
Projected Notice End
Case No. Received Date Date Manufacturer/Importer Use Chemical
--------------------------------------------------------------------------------------------------------------------------------------------------------
P-06-0537 05/19/06 08/16/06 CBI (G) Surfactant for (G) Ester of fatty
resins (polymer acid with bisphenol
additives) a ethoxylate
P-06-0539 05/23/06 08/20/06 CBI (G) Reactant (G) Methyl
propylhexanol
P-06-0540 05/23/06 08/20/06 CBI (G) Open non- (G) Aliphatic
dispersive(coating) polyester--polyether
polyurethane
dispersion
P-06-0541 05/23/06 08/20/06 CBI (G) Open non- (G) Aromatic
dispersive(coating) thermoplastic
polyurethane
P-06-0542 05/23/06 08/20/06 CBI (G) Plasticizer (G) Tridecyl
phthalate
P-06-0543 05/23/06 08/20/06 CBI (G) Reactant (G) methyl
propylhexanol
P-06-0544 05/23/06 08/20/06 CBI (S) Component of (G) Metal complex,
antifouling paint copolymer of
substituted acrylic
acid, substituted
methacrylate,
substituted
acrylate, and
ethylene glycol
substituted acrylate
alkyl ether.
P-06-0545 05/23/06 08/20/06 CBI (G) Dispersing agent (G) Poly(alkoxy),
.alpha.-[2,2-
bis(hydroxymethyl)al
kyl]-.omega.-alkoxy-
P-06-0546 05/23/06 08/20/06 Cytec Surface (S) Resin for paints (G) Substituted
Specialties Inc. and coatings carbomonocycle,
polymer
withisocyanate
substituted alkyl
carbomonocycle,
substituted
alkenoates,
substituted
heteromonocycle,
alkanedioic acid,
alkane diol,
reaction products
with substituted
alkylamine,
compounds with
substituted alkanol.
P-06-0547 05/23/06 08/20/06 BASF Corporation (S) Sizing agent (G) Anionic
acrylonitrile-
acrylic copolymer
dispersion
P-06-0548 05/24/06 08/21/06 DOW Agrosciences (G) Process (G) Substituted
intermediate trihalomethylpyridin
e
P-06-0549 05/24/06 08/21/06 CBI (G) Open, non- (G) Quaternized
dispersive (resin) styrene polymer
P-06-0550 05/24/06 08/21/06 CBI (G) Open, non- (G) Quaternized
dispersive (resin) styrene polymer
P-06-0551 05/24/06 08/21/06 DOW Agrosciences (G) Process (G) Substituted
intermediate trihalomethylpyridin
e chloride
[[Page 36087]]
P-06-0552 05/24/06 08/21/06 Hybrid Plastics, Inc. (G) Thermoplastic (S)
polymer additive Tricyclo[7.3.3.15,11
(open, non- ]heptasiloxane-
dispersive) 3,7,14-triol,
1,3,5,7,9,11,14-
heptakis(2-
methylpropyl)-
P-06-0553 05/24/06 08/21/06 DOW Agrosciences (G) Process (G) Substituted
intermediate trihalomethylpyridin
ethiolate
P-06-0554 05/24/06 08/21/06 DOW Agrosciences (G) Process (G) Substituted
intermediate aminotriazolopyrimid
ine
P-06-0555 05/25/06 08/22/06 CBI (G) Coating to make (G) Phthalic
copper laminate anhydride polymer
with benzenediamine,
carbonylated
furandion and
substituted aniline
P-06-0556 05/25/06 08/22/06 CBI (S) Dispersing agent (G)
for crop protection; Polyoxyalkylenesilan
dispersing agent for e
home care cleaners
P-06-0557 05/25/06 08/22/06 CBI (S) Intermediate for (G) Silane hydride
dispersing agent
P-06-0558 05/25/06 08/22/06 CBI (S) Intermediate for (G) Chlorosilane
dispersing agent
P-06-0559 05/30/06 08/27/06 CBI (G) Prepolymer of (G) Aromatic
polyester urethane saturated
copolyester
P-06-0560 05/30/06 08/27/06 CBI (G) Paper treatment (G) Fluoroalkyl
additive methacrylate
copolymer
P-06-0561 05/30/06 08/27/06 CBI (G) Textile treatment (G) Fluoroalkyl
additive methacrylate
copolymer
P-06-0562 05/30/06 08/27/06 CBI (G) Carpet treatment (G) Fluoroalkyl
additive acrylate copolymer
P-06-0563 05/30/06 08/27/06 CBI (G) Textile treatment (G) Fluoroalkyl
additive methacrylate
copolymer
P-06-0564 05/30/06 08/27/06 CBI (G) Textile treatment (G) Fluoroalkyl
additive methacrylate
copolymer
P-06-0565 05/30/06 08/27/06 CBI (G) Textile treatment (G) Fluoroalkyl
additive methacrylate
copolymer
P-06-0566 05/30/06 08/27/06 CBI (G) Textile treatment (G) Fluoroalkyl
additive methacrylate
copolymer
P-06-0567 05/30/06 08/27/06 CBI (G) Carpet treatment (G) Fluoroalkyl
additive acrylate copolymer
P-06-0568 05/30/06 08/27/06 CBI (G) Textile treatment (G) Fluoroalkyl
additive methacrylate
copolymer
P-06-0569 05/30/06 08/27/06 CBI (G) Textile treatment (G) Fluoroalkyl
additive acrylate copolymer
P-06-0570 05/30/06 08/27/06 CBI (G) Textile treatment (G) Fluoroalkyl
additive methacrylate
copolymer
P-06-0571 05/30/06 08/27/06 CBI (G) Textile treatment (G) Fluoroalkyl
additive methacrylate
copolymer
P-06-0572 05/30/06 08/27/06 CBI (G) Textile treatment (G) Fluoroalkyl
additive methacrylate
copolymer
P-06-0573 05/30/06 08/27/06 CBI (G) Carpet treatment (G) Fluorochemical
additive urethane
P-06-0574 05/30/06 08/27/06 CBI (G) Tile surface (G) Fluoroalkyl
treatment methacrylate
copolymer
P-06-0575 05/30/06 08/27/06 CBI (G) Paper treatment (G) Fluoroalkyl
additive acrylate copolymer
P-06-0576 05/30/06 08/27/06 CBI (G) Textile treatment (G)
additive Fluoroalkylacrylate
copolymer
P-06-0577 05/30/06 08/27/06 CBI (G) Paper treatment (G) Fluoroalkyl
additive methacrylate
copolymer
P-06-0578 05/30/06 08/27/06 CBI (G) Paper treatment (G) Fluoroalkyl
additive acrylate copolymer
P-06-0579 05/30/06 08/27/06 CBI (G) Textile treatment (G)
additive Fluoroalkylacrylate
copolymer
P-06-0580 05/30/06 08/27/06 CBI (G) Textile treatment (G) Fluoroalkyl
additive acrylate copolymer
--------------------------------------------------------------------------------------------------------------------------------------------------------
In Table II of this unit, EPA provides the following information
(to the extent that such information is not claimed as CBI) on the
Notices of Commencement to manufacture received:
II. 22 Notices of Commencement From: 05/22/06 to 06/2/06
----------------------------------------------------------------------------------------------------------------
Commencement Notice
Case No. Received Date End Date Chemical
----------------------------------------------------------------------------------------------------------------
P-05-0058 05/22/06 05/11/06 (G) Ether amine
phosphonate salt
[[Page 36088]]
P-05-0062 05/22/06 05/11/06 (G) Ether amine
phosphonate salt
P-05-0304 05/23/06 05/18/06 (S) 2,4,8,10-
tetraoxaspiro[5.5]undecan
e-3,9-diethanol,
.beta.,.beta.,.beta.',.be
ta.'-tetramethyl-
P-05-0552 05/22/06 05/03/06 (G) Aromatic polyurethane
polymer
P-05-0722 05/24/06 04/28/06 (G) Carbon black, hydroxy-
and 4-[[2-
(sulfooxy)ethyl]substitut
ed]phenyl-modified,
sodium salt
P-05-0835 05/19/06 05/09/06 (G) Vinyl homopolymer,
salt
P-06-0038 05/24/06 04/30/06 (S) Starch, polymer with 2-
propenenitrile,
hydrolyzed, potassium
salts
P-06-0085 05/30/06 05/19/06 (G) (substituted)-
benzenecarboxylic
acid,2,2'-[(substituted)
bis[imino(substituted)-
azo]] bis-,tetramethyl
ester
P-06-0104 05/24/06 04/10/06 (G) Substituted sulfonated
phenyl azo naphthalene
P-06-0157 05/19/06 04/12/06 (G) Organic acid salt of
an alkylalkanolamine
P-06-0158 05/19/06 04/12/06 (G) Organic acid salt of
an alkylalkanolamine
P-06-0159 05/19/06 04/12/06 (G) Organic acid salt of
an alkylalkanolamine
ethoxylate
P-06-0160 05/19/06 04/12/06 (G) Organic acid salt of
an ethoxylated
alkanolamine
P-06-0161 05/19/06 04/12/06 (G) Organic acid salt of
an alkanolamine
P-06-0174 05/30/06 05/17/06 (G) Amine salt of an
organic acid
P-06-0244 05/30/06 05/14/06 (G) Isocyanate functional
polyester polyether
urethane polymer
P-06-0245 05/25/06 05/10/06 (G) Siloxanes and
silicones, di-me, 3-
hydroxypropyl me, ethers
with polyalkylene glycol
mono[2-hydroxy-3-[[6-
(oxiranylalkoxy)alkyl]oxy
]alkyl alkyl-
carbomonocyclicdicarboxyl
ate]
P-06-0271 05/31/06 05/22/06 (S) Oils, agathosma ovata
P-06-0292 05/19/06 05/11/06 (G) Olefinic carbamate
P-06-0296 05/19/06 05/13/06 (G) Naphthalenesulfonic
acid azo substituted
naphthalenesulfonic acid
amino substituted
triazine amino
substituted phenyl azo
phenyl sulfonyl compound
P-06-0301 05/19/06 05/16/06 (G) Modified anionic
polyacrylamide
P-93-0999 05/24/06 04/27/06 (G) Modified polymer of
alkenoic esters and
styrene
----------------------------------------------------------------------------------------------------------------
List of Subjects
Environmental protection, Chemicals, Premanufacturer notices.
Dated: June 8, 2006.
LaRona M. Washington,
Acting Director, Information Management Division, Office of Pollution
Prevention and Toxics.
[FR Doc. E6-9862 Filed 6-22-06; 8:45 am]
BILLING CODE 6560-50-S
