Airworthiness Directives; Honeywell International Inc. T5311A, T5311B, T5313B, T5317A, T5317A-1, and T5317B Series Turboshaft Engines and Lycoming Former Military T53-L-11B, T53-L-11D, T53-L-13B, T53-L-13B/D, and T53-L-703 Series Turboshaft Engines, 30795-30796 [06-4908]
Download as PDF
30795
Rules and Regulations
Federal Register
Vol. 71, No. 104
Wednesday, May 31, 2006
This section of the FEDERAL REGISTER
contains regulatory documents having general
applicability and legal effect, most of which
are keyed to and codified in the Code of
Federal Regulations, which is published under
50 titles pursuant to 44 U.S.C. 1510.
The Code of Federal Regulations is sold by
the Superintendent of Documents. Prices of
new books are listed in the first FEDERAL
REGISTER issue of each week.
Federal Aviation Administration
14 CFR Part 39
[Docket No. 98–ANE–72–AD; Amendment
39–14620; AD 2006–11–16]
RIN 2120–AA64
Airworthiness Directives; Honeywell
International Inc. T5311A, T5311B,
T5313B, T5317A, T5317A–1, and
T5317B Series Turboshaft Engines and
Lycoming Former Military T53–L–11B,
T53–L–11D, T53–L–13B, T53–L–13B/D,
and T53–L–703 Series Turboshaft
Engines
Federal Aviation
Administration (FAA), DOT.
ACTION: Final rule.
mstockstill on PROD1PC61 with RULES
AGENCY:
SUMMARY: The FAA is superseding an
existing airworthiness directive (AD) for
AlliedSignal, Inc. T5317A–1 turboshaft
engines. That AD currently requires
repetitive engine fuel pump pressure
tests of certain fuel control regulator
assemblies to determine if both fuel
pumps in the fuel control regulator
assemblies are producing fuel pressure.
That AD also requires replacing the fuel
control regulator assembly, if necessary.
This AD requires initial and repetitive
visual and dimensional inspections of
fuel control regulator assembly main
and secondary drive shaft and pump
gear splines, installed in certain fuel
control regulator assemblies. This AD
also expands the engine applicability,
and includes certain engines installed
on helicopters certified under § 21.25 or
21.27 of the Code of Federal Regulations
(14 CFR 21.25 or 14 CFR 21.27). This
AD results from several reports of loss
of fuel flow from the engine fuel control
regulator assembly due to failure of both
main and secondary drive shaft and
pump gear splines. We are issuing this
14:53 May 30, 2006
Jkt 208001
This AD becomes effective July
5, 2006. The Director of the Federal
Register approved the incorporation by
reference of certain publications listed
in the regulations as of July 5, 2006.
DATES:
You can get the service
information identified in this AD from
Goodrich Pumps & Engine Control
Systems, P.O. Box 3306519, West
Hartford, CT 06133, fax (860) 231–2718.
You may examine the AD docket at
the FAA, New England Region, Office of
the Regional Counsel, 12 New England
Executive Park, Burlington, MA. You
may examine the service information, at
the FAA, New England Region, Office of
the Regional Counsel, 12 New England
Executive Park, Burlington, MA.
ADDRESSES:
DEPARTMENT OF TRANSPORTATION
VerDate Aug<31>2005
AD to prevent in-flight engine failure
and forced autorotation landing.
FOR FURTHER INFORMATION CONTACT:
Robert Baitoo, Aerospace Engineer, Los
Angeles Aircraft Certification Office,
FAA, Transport Airplane Directorate,
3960 Paramount Blvd., Lakewood, CA
90712–4137; telephone: (562) 627–5245,
fax: (562) 627–5210.
The FAA
proposed to amend 14 CFR part 39 with
a proposed AD. The proposed AD
applies to Honeywell International Inc.
T5311A, T5311B, T5313B, T5317A,
T5317A–1, and T5317B series
turboshaft engines and Lycoming former
military T53–L–11B, T53–L–11D, T53–
L–13B, T53–L–13B/D, and T53–L–703
series turboshaft engines. We published
the proposed AD in the Federal Register
on December 28, 2005 (70 FR 77073).
That action proposed to require initial
and repetitive visual and dimensional
inspections of fuel control regulator
assembly main and secondary drive
shaft and pump gear splines, installed
in certain fuel control regulator
assemblies. That action also proposed to
expand the engine applicability, and
include certain engines installed on
helicopters certified under § 21.25 or
21.27 of the Code of Federal Regulations
(14 CFR 21.25 or 14 CFR 21.27).
SUPPLEMENTARY INFORMATION:
Examining the AD Docket
You may examine the AD Docket
(including any comments and service
information), by appointment, between
8 a.m. and 4:30 p.m., Monday through
Friday, except Federal holidays. See
ADDRESSES for the location.
PO 00000
Frm 00001
Fmt 4700
Sfmt 4700
Comments
We provided the public the
opportunity to participate in the
development of this AD. We have
considered the one comment received.
The commenter, Honeywell
International Inc., states that they issued
or revised three service bulletins in
response to the unsafe condition in the
proposed AD. We note that they have
issued the service bulletins. We did not
change the AD based on this comment.
Conclusion
We have carefully reviewed the
available data, including the comment
received, and determined that air safety
and the public interest require adopting
the AD as proposed.
Costs of Compliance
We estimate that this AD will affect
592 engines installed on helicopters of
U.S. registry. We also estimate that it
will take about 8 workhours per engine
to perform an inspection, and that the
average labor rate is $65 per work hour.
Based on these figures, we estimate the
cost of the AD to U.S. operators for one
inspection to be $307,840. A
replacement fuel control regulator pump
assembly will cost about $18,000. We
estimate that if all affected fuel control
regulator pump assemblies failed
inspection and had to be replaced, the
total parts cost of the AD to U.S.
operators will be $10,656,000.
Authority for This Rulemaking
Title 49 of the United States Code
specifies the FAA’s authority to issue
rules on aviation safety. Subtitle I,
section 106, describes the authority of
the FAA Administrator. Subtitle VII,
Aviation Programs, describes in more
detail the scope of the Agency’s
authority.
We are issuing this rulemaking under
the authority described in subtitle VII,
part A, subpart III, section 44701,
‘‘General requirements.’’ Under that
section, Congress charges the FAA with
promoting safe flight of civil aircraft in
air commerce by prescribing regulations
for practices, methods, and procedures
the Administrator finds necessary for
safety in air commerce. This regulation
is within the scope of that authority
because it addresses an unsafe condition
that is likely to exist or develop on
products identified in this rulemaking
action.
E:\FR\FM\31MYR1.SGM
31MYR1
30796
Federal Register / Vol. 71, No. 104 / Wednesday, May 31, 2006 / Rules and Regulations
Regulatory Findings
We have determined that this AD will
not have federalism implications under
Executive Order 13132. This AD will
not have a substantial direct effect on
the States, on the relationship between
the national government and the States,
or on the distribution of power and
responsibilities among the various
levels of government.
For the reasons discussed above, I
certify that this AD:
(1) Is not a ‘‘significant regulatory
action’’ under Executive Order 12866;
(2) Is not a ‘‘significant rule’’ under
DOT Regulatory Policies and Procedures
(44 FR 11034, February 26, 1979); and
(3) Will not have a significant
economic impact, positive or negative,
on a substantial number of small entities
under the criteria of the Regulatory
Flexibility Act.
We prepared a summary of the costs
to comply with this AD and placed it in
the AD Docket. You may get a copy of
this summary by sending a request to us
at the address listed under ADDRESSES.
Include ‘‘AD Docket No. 98–ANE–72–
AD’’ in your request.
List of Subjects in 14 CFR Part 39
Air transportation, Aircraft, Aviation
safety, Incorporation by reference,
Safety.
Adoption of the Amendment
Accordingly, under the authority
delegated to me by the Administrator,
the Federal Aviation Administration
amends 14 CFR part 39 as follows:
I
PART 39—AIRWORTHINESS
DIRECTIVES
1. The authority citation for part 39
continues to read as follows:
I
Authority: 49 U.S.C. 106(g), 40113, 44701.
§ 39.13
[Amended]
2. The FAA amends § 39.13 by
removing Amendment 39–10926 (63 FR
66741, December 3, 1998) and by adding
a new airworthiness directive,
Amendment 39–14620, to read as
follows:
I
2006–11–16 Honeywell International Inc.
(formerly AlliedSignal, Inc., formerly
Textron Lycoming, formerly Avco
Lycoming): Amendment 39–14620.
Docket No. 98–ANE–72–AD.
Unsafe Condition
(e) This AD results from several reports of
loss of fuel flow from the engine fuel control
regulator assembly due to failure of both
main and secondary drive shaft and pump
gear splines. We are issuing this AD to
prevent in-flight engine failure and forced
autorotation landing.
Compliance
(f) You are responsible for having the
actions required by this AD performed within
the compliance times specified unless the
actions have already been done.
Initial Visual and Dimensional Inspection
(g) Within 150 flight hours after the
effective date of this AD, do the following:
(1) Remove the fuel control regulator
assembly from the engine and perform an
initial visual and dimensional inspection of
the fuel control regulator assembly main and
secondary drive shaft and pump gear splines
for wear.
(2) Use paragraphs 2.A. through 2.D.(7) and
2.E. through 2.F.(2) of the Accomplishment
Instructions of Goodrich Pump & Engine
Control Systems, Inc. (TA series) Service
Bulletin (SB) No. 73–42, Revision 1, dated
August 12, 2004 to do the inspection.
(3) Do not install any engine fuel control
regulator assembly that fails inspection.
Repetitive Visual and Dimensional
Inspections
(h) Thereafter, within every 1,250 flight
hours since-last-inspection, perform
repetitive visual and dimensional inspections
of the fuel control regulator assembly main
and secondary drive shaft and pump gear
splines for wear, as specified in paragraphs
(g)(1) through (g)(3) of this AD.
Affected ADs
(b) This AD supersedes AD 98–22–11.
Alternative Methods of Compliance
(i) The Manager, Los Angeles Aircraft
Certification Office, has the authority to
approve alternative methods of compliance
for this AD if requested using the procedures
found in 14 CFR 39.19.
Applicability
(c) This AD applies to Honeywell
International Inc., (formerly AlliedSignal,
Related Information
(j) Honeywell International Inc. Service
Bulletin No. T53–0138, Revision 1, dated
Effective Date
(a) This AD becomes effective July 5, 2006.
mstockstill on PROD1PC61 with RULES
Inc., formerly Textron Lycoming, formerly
Avco Lycoming) T5311A, T5311B, T5313B,
T5317A, T5317A–1, and T5317B series
turboshaft engines and Lycoming former
military T53–L–11B, T53–L–11D, T53–L–
13B, T53–L–13B/D, and T53–L–703 series
turboshaft engines using Goodrich Pump &
Engine Control Systems, Inc. (GPECS)
(formerly Chandler Evans Control Systems)
engine fuel control regulator assembly
models TA–2S, TA–2G, TA–2F, TA–7, or
TA–10.
(d) The T5311A, T5311B, T5313B, T5317A,
T5317A–1, and T5317B turboshaft engines
are installed on, but not limited to, Bell 204,
205, and Kaman K–1200 helicopters.
Lycoming T53–L–11B, T53–L–11D, T53–L–
13B, T53–L–13B/D, and T53–L–703 series
turboshaft engines are installed on, but not
limited to, Bell AH–1 and UH–1 helicopters
certified under § 21.25 or 21.27 of the Code
of Federal Regulations (14 CFR 21.25 or 14
CFR 21.27).
VerDate Aug<31>2005
14:53 May 30, 2006
Jkt 208001
PO 00000
Frm 00002
Fmt 4700
Sfmt 4700
May 5, 2005, also pertains to the subject of
this AD.
Material Incorporated by Reference
(k) You must use Goodrich Pump & Engine
Control Systems, Inc. (TA series) Service
Bulletin (SB) No. 73–42, Revision 1, dated
August 12, 2004, to perform the inspections
required by this AD. The Director of the
Federal Register approved the incorporation
by reference of this service bulletin in
accordance with 5 U.S.C. 552(a) and 1 CFR
part 51. You can get a copy from Goodrich
Pumps & Engine Control Systems, P.O. Box
3306519, West Hartford, CT 06133, fax (860)
231–2718. You can review a copy at the FAA,
New England Region, Office of the Regional
Counsel, 12 New England Executive Park,
Burlington, MA; or at the National Archives
and Records Administration (NARA). For
information on the availability of this
material at NARA, call 202–741–6030, or go
to: https://www.archives.gov/federal-register/
cfr/ibr-locations.html.
Issued in Burlington, Massachusetts, on
May 23, 2006.
Thomas A. Boudreau,
Acting Manager, Engine and Propeller
Directorate, Aircraft Certification Service.
[FR Doc. 06–4908 Filed 5–30–06; 8:45 am]
BILLING CODE 4910–13–P
DEPARTMENT OF TRANSPORTATION
Federal Aviation Administration
14 CFR Part 39
[Docket No. FAA–2005–23478; Directorate
Identifier 2005–NM–175–AD; Amendment
39–14602; AD 2006–10–18]
RIN 2120–AA64
Airworthiness Directives; Gulfstream
Aerospace LP Model Galaxy and Model
Gulfstream 200 Airplanes
Federal Aviation
Administration (FAA), Department of
Transportation (DOT).
ACTION: Final rule.
AGENCY:
SUMMARY: The FAA is adopting a new
airworthiness directive (AD) for all
Gulfstream Aerospace LP Model Galaxy
and Model Gulfstream 200 airplanes.
This AD requires revising the
Limitations section of the airplane flight
manual (AFM) by incorporating revised
takeoff performance tables. This AD
results from a correction of the power
setting logic and table limits in the
performance model by the engine
manufacturer. We are issuing this AD to
ensure that the flightcrew is provided
with correct information to ensure a safe
takeoff at certain altitudes; inadequate
takeoff performance tables used in such
conditions could result in reduced
control of the airplane during takeoff.
E:\FR\FM\31MYR1.SGM
31MYR1
Agencies
[Federal Register Volume 71, Number 104 (Wednesday, May 31, 2006)]
[Rules and Regulations]
[Pages 30795-30796]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 06-4908]
========================================================================
Rules and Regulations
Federal Register
________________________________________________________________________
This section of the FEDERAL REGISTER contains regulatory documents
having general applicability and legal effect, most of which are keyed
to and codified in the Code of Federal Regulations, which is published
under 50 titles pursuant to 44 U.S.C. 1510.
The Code of Federal Regulations is sold by the Superintendent of Documents.
Prices of new books are listed in the first FEDERAL REGISTER issue of each
week.
========================================================================
Federal Register / Vol. 71, No. 104 / Wednesday, May 31, 2006 / Rules
and Regulations
[[Page 30795]]
DEPARTMENT OF TRANSPORTATION
Federal Aviation Administration
14 CFR Part 39
[Docket No. 98-ANE-72-AD; Amendment 39-14620; AD 2006-11-16]
RIN 2120-AA64
Airworthiness Directives; Honeywell International Inc. T5311A,
T5311B, T5313B, T5317A, T5317A-1, and T5317B Series Turboshaft Engines
and Lycoming Former Military T53-L-11B, T53-L-11D, T53-L-13B, T53-L-
13B/D, and T53-L-703 Series Turboshaft Engines
AGENCY: Federal Aviation Administration (FAA), DOT.
ACTION: Final rule.
-----------------------------------------------------------------------
SUMMARY: The FAA is superseding an existing airworthiness directive
(AD) for AlliedSignal, Inc. T5317A-1 turboshaft engines. That AD
currently requires repetitive engine fuel pump pressure tests of
certain fuel control regulator assemblies to determine if both fuel
pumps in the fuel control regulator assemblies are producing fuel
pressure. That AD also requires replacing the fuel control regulator
assembly, if necessary. This AD requires initial and repetitive visual
and dimensional inspections of fuel control regulator assembly main and
secondary drive shaft and pump gear splines, installed in certain fuel
control regulator assemblies. This AD also expands the engine
applicability, and includes certain engines installed on helicopters
certified under Sec. 21.25 or 21.27 of the Code of Federal Regulations
(14 CFR 21.25 or 14 CFR 21.27). This AD results from several reports of
loss of fuel flow from the engine fuel control regulator assembly due
to failure of both main and secondary drive shaft and pump gear
splines. We are issuing this AD to prevent in-flight engine failure and
forced autorotation landing.
DATES: This AD becomes effective July 5, 2006. The Director of the
Federal Register approved the incorporation by reference of certain
publications listed in the regulations as of July 5, 2006.
ADDRESSES: You can get the service information identified in this AD
from Goodrich Pumps & Engine Control Systems, P.O. Box 3306519, West
Hartford, CT 06133, fax (860) 231-2718.
You may examine the AD docket at the FAA, New England Region,
Office of the Regional Counsel, 12 New England Executive Park,
Burlington, MA. You may examine the service information, at the FAA,
New England Region, Office of the Regional Counsel, 12 New England
Executive Park, Burlington, MA.
FOR FURTHER INFORMATION CONTACT: Robert Baitoo, Aerospace Engineer, Los
Angeles Aircraft Certification Office, FAA, Transport Airplane
Directorate, 3960 Paramount Blvd., Lakewood, CA 90712-4137; telephone:
(562) 627-5245, fax: (562) 627-5210.
SUPPLEMENTARY INFORMATION: The FAA proposed to amend 14 CFR part 39
with a proposed AD. The proposed AD applies to Honeywell International
Inc. T5311A, T5311B, T5313B, T5317A, T5317A-1, and T5317B series
turboshaft engines and Lycoming former military T53-L-11B, T53-L-11D,
T53-L-13B, T53-L-13B/D, and T53-L-703 series turboshaft engines. We
published the proposed AD in the Federal Register on December 28, 2005
(70 FR 77073). That action proposed to require initial and repetitive
visual and dimensional inspections of fuel control regulator assembly
main and secondary drive shaft and pump gear splines, installed in
certain fuel control regulator assemblies. That action also proposed to
expand the engine applicability, and include certain engines installed
on helicopters certified under Sec. 21.25 or 21.27 of the Code of
Federal Regulations (14 CFR 21.25 or 14 CFR 21.27).
Examining the AD Docket
You may examine the AD Docket (including any comments and service
information), by appointment, between 8 a.m. and 4:30 p.m., Monday
through Friday, except Federal holidays. See ADDRESSES for the
location.
Comments
We provided the public the opportunity to participate in the
development of this AD. We have considered the one comment received.
The commenter, Honeywell International Inc., states that they
issued or revised three service bulletins in response to the unsafe
condition in the proposed AD. We note that they have issued the service
bulletins. We did not change the AD based on this comment.
Conclusion
We have carefully reviewed the available data, including the
comment received, and determined that air safety and the public
interest require adopting the AD as proposed.
Costs of Compliance
We estimate that this AD will affect 592 engines installed on
helicopters of U.S. registry. We also estimate that it will take about
8 workhours per engine to perform an inspection, and that the average
labor rate is $65 per work hour. Based on these figures, we estimate
the cost of the AD to U.S. operators for one inspection to be $307,840.
A replacement fuel control regulator pump assembly will cost about
$18,000. We estimate that if all affected fuel control regulator pump
assemblies failed inspection and had to be replaced, the total parts
cost of the AD to U.S. operators will be $10,656,000.
Authority for This Rulemaking
Title 49 of the United States Code specifies the FAA's authority to
issue rules on aviation safety. Subtitle I, section 106, describes the
authority of the FAA Administrator. Subtitle VII, Aviation Programs,
describes in more detail the scope of the Agency's authority.
We are issuing this rulemaking under the authority described in
subtitle VII, part A, subpart III, section 44701, ``General
requirements.'' Under that section, Congress charges the FAA with
promoting safe flight of civil aircraft in air commerce by prescribing
regulations for practices, methods, and procedures the Administrator
finds necessary for safety in air commerce. This regulation is within
the scope of that authority because it addresses an unsafe condition
that is likely to exist or develop on products identified in this
rulemaking action.
[[Page 30796]]
Regulatory Findings
We have determined that this AD will not have federalism
implications under Executive Order 13132. This AD will not have a
substantial direct effect on the States, on the relationship between
the national government and the States, or on the distribution of power
and responsibilities among the various levels of government.
For the reasons discussed above, I certify that this AD:
(1) Is not a ``significant regulatory action'' under Executive
Order 12866;
(2) Is not a ``significant rule'' under DOT Regulatory Policies and
Procedures (44 FR 11034, February 26, 1979); and
(3) Will not have a significant economic impact, positive or
negative, on a substantial number of small entities under the criteria
of the Regulatory Flexibility Act.
We prepared a summary of the costs to comply with this AD and
placed it in the AD Docket. You may get a copy of this summary by
sending a request to us at the address listed under ADDRESSES. Include
``AD Docket No. 98-ANE-72-AD'' in your request.
List of Subjects in 14 CFR Part 39
Air transportation, Aircraft, Aviation safety, Incorporation by
reference, Safety.
Adoption of the Amendment
0
Accordingly, under the authority delegated to me by the Administrator,
the Federal Aviation Administration amends 14 CFR part 39 as follows:
PART 39--AIRWORTHINESS DIRECTIVES
0
1. The authority citation for part 39 continues to read as follows:
Authority: 49 U.S.C. 106(g), 40113, 44701.
Sec. 39.13 [Amended]
0
2. The FAA amends Sec. 39.13 by removing Amendment 39-10926 (63 FR
66741, December 3, 1998) and by adding a new airworthiness directive,
Amendment 39-14620, to read as follows:
2006-11-16 Honeywell International Inc. (formerly AlliedSignal,
Inc., formerly Textron Lycoming, formerly Avco Lycoming): Amendment
39-14620. Docket No. 98-ANE-72-AD.
Effective Date
(a) This AD becomes effective July 5, 2006.
Affected ADs
(b) This AD supersedes AD 98-22-11.
Applicability
(c) This AD applies to Honeywell International Inc., (formerly
AlliedSignal, Inc., formerly Textron Lycoming, formerly Avco
Lycoming) T5311A, T5311B, T5313B, T5317A, T5317A-1, and T5317B
series turboshaft engines and Lycoming former military T53-L-11B,
T53-L-11D, T53-L-13B, T53-L-13B/D, and T53-L-703 series turboshaft
engines using Goodrich Pump & Engine Control Systems, Inc. (GPECS)
(formerly Chandler Evans Control Systems) engine fuel control
regulator assembly models TA-2S, TA-2G, TA-2F, TA-7, or TA-10.
(d) The T5311A, T5311B, T5313B, T5317A, T5317A-1, and T5317B
turboshaft engines are installed on, but not limited to, Bell 204,
205, and Kaman K-1200 helicopters. Lycoming T53-L-11B, T53-L-11D,
T53-L-13B, T53-L-13B/D, and T53-L-703 series turboshaft engines are
installed on, but not limited to, Bell AH-1 and UH-1 helicopters
certified under Sec. 21.25 or 21.27 of the Code of Federal
Regulations (14 CFR 21.25 or 14 CFR 21.27).
Unsafe Condition
(e) This AD results from several reports of loss of fuel flow
from the engine fuel control regulator assembly due to failure of
both main and secondary drive shaft and pump gear splines. We are
issuing this AD to prevent in-flight engine failure and forced
autorotation landing.
Compliance
(f) You are responsible for having the actions required by this
AD performed within the compliance times specified unless the
actions have already been done.
Initial Visual and Dimensional Inspection
(g) Within 150 flight hours after the effective date of this AD,
do the following:
(1) Remove the fuel control regulator assembly from the engine
and perform an initial visual and dimensional inspection of the fuel
control regulator assembly main and secondary drive shaft and pump
gear splines for wear.
(2) Use paragraphs 2.A. through 2.D.(7) and 2.E. through 2.F.(2)
of the Accomplishment Instructions of Goodrich Pump & Engine Control
Systems, Inc. (TA series) Service Bulletin (SB) No. 73-42, Revision
1, dated August 12, 2004 to do the inspection.
(3) Do not install any engine fuel control regulator assembly
that fails inspection.
Repetitive Visual and Dimensional Inspections
(h) Thereafter, within every 1,250 flight hours since-last-
inspection, perform repetitive visual and dimensional inspections of
the fuel control regulator assembly main and secondary drive shaft
and pump gear splines for wear, as specified in paragraphs (g)(1)
through (g)(3) of this AD.
Alternative Methods of Compliance
(i) The Manager, Los Angeles Aircraft Certification Office, has
the authority to approve alternative methods of compliance for this
AD if requested using the procedures found in 14 CFR 39.19.
Related Information
(j) Honeywell International Inc. Service Bulletin No. T53-0138,
Revision 1, dated May 5, 2005, also pertains to the subject of this
AD.
Material Incorporated by Reference
(k) You must use Goodrich Pump & Engine Control Systems, Inc.
(TA series) Service Bulletin (SB) No. 73-42, Revision 1, dated
August 12, 2004, to perform the inspections required by this AD. The
Director of the Federal Register approved the incorporation by
reference of this service bulletin in accordance with 5 U.S.C.
552(a) and 1 CFR part 51. You can get a copy from Goodrich Pumps &
Engine Control Systems, P.O. Box 3306519, West Hartford, CT 06133,
fax (860) 231-2718. You can review a copy at the FAA, New England
Region, Office of the Regional Counsel, 12 New England Executive
Park, Burlington, MA; or at the National Archives and Records
Administration (NARA). For information on the availability of this
material at NARA, call 202-741-6030, or go to: https://
www.archives.gov/federal-register/cfr/ibr-locations.html.
Issued in Burlington, Massachusetts, on May 23, 2006.
Thomas A. Boudreau,
Acting Manager, Engine and Propeller Directorate, Aircraft
Certification Service.
[FR Doc. 06-4908 Filed 5-30-06; 8:45 am]
BILLING CODE 4910-13-P