Draft Order 8040.2, Airworthiness Directive Process for Mandatory Continuing Airworthiness Information, 28075 [06-4525]
Download as PDF
<![CDATA[
Federal Register / Vol. 71, No. 93 / Monday, May 15, 2006 / Notices
DEPARTMENT OF TRANSPORTATION
DEPARTMENT OF TRANSPORTATION
Federal Aviation Administration
Federal Aviation Administration
Advisory Circular 33.87–1, Calibration
Test, Endurance Test, and Teardown
Inspection for Turbine Engine
Certification (§§ 33.85, 33.87, 33.93)
Draft Order 8040.2, Airworthiness
Directive Process for Mandatory
Continuing Airworthiness Information
Federal Aviation
Administration (FAA), DOT.
ACTION: Notice of issuance of advisory
circular.
AGENCY:
This notice announces the
issuance of Advisory Circular 9AC)
33.87–1, Calibration Test, Endurance
Test, and Teardown Inspection for
Turbine Engine Certification. This AC
sets forth acceptable methods of
compliance for aircraft engines with the
provisions of §§ 33.85, 33.87, and 33.93
of Title 14 of the Code of Federal
Regulations. This AC provides guidance
for part 33 type certification endurance
testing of all classes of turbine engines.
DATES: The Engine and Propeller
Directorate issued Advisory Circular
33.87–1 on April 13, 2006.
FOR FURTHER INFORMATION CONTACT: The
Federal Aviation Administration, Attn:
Robert McCabe, Engine and Propeller
Standards Staff, Rulemaking and Policy
Branch, ANE–111, 12 New England
Executive Park, Burlington, MA 01803–
5299; telephone: (781) 238–7138; fax
(781) 238–7199; e-mail:
robert.mccabe@faa.gov.
We have filed in the docket all
substantive comments received, and a
report summarizing them. If you wish to
review the docket in person, you may go
to the above address between 9 a.m. and
5 p.m., Monday through Friday, except
Federal holidays. If you wish to contact
the above individual directly, you can
use the above telephone number or email address provided.
How to Obtain Copies: A paper copy
of AC 33.87–1 may be obtained by
writing to the U.S. Department of
Transportation, Subsequent Distribution
Office, DOT Warehouse, SVC–121.23,
Ardmore East Business Center, 3341 Q
75th Ave., Landover, MD 20785,
telephone 301–322–5377, or by faxing
your request to the warehouse at 301–
386–5394. The AC will also be available
on the Internet at https://www.faa.gov.
SUMMARY:
jlentini on PROD1PC65 with NOTICES
Authority: 49 U.S.C. 106(g), 40113, 44701–
44702, 44704)
Issued in Burlington, Massachusetts on
April 13, 2006.
Francis A. Favara,
Manager, Engine and Propeller Directorate,
Aircraft Certification Service.
[FR Doc. 06–4526 Filed 5–12–06; 8:45 am]
BILLING CODE 4910–13–M
VerDate Aug<31>2005
16:54 May 12, 2006
Jkt 208001
Federal Aviation
Administration (DOT).
ACTION: Notice of availability and
request for public comment.
AGENCY:
SUMMARY: This notice announces the
availability of, and requests comments
on draft Order 8040.2, Airworthiness
Directive Process for Mandatory
Continuing Airworthiness Information.
The draft order describes new policy
and procedures for developing and
issuing Federal Aviation Administration
(FAA) airworthiness directives (AD) on
imported products where the State of
Design Authority issued mandatory
continuing airworthiness information
(MCAI). The process will allow for a
timelier issuance of ADs.
DATES: Comments must be received on
or before June 14, 2006.
ADDRESSES: Send your comments on the
draft Order electronically by logging
onto the following Web site: https://
www.faa.gov/aircraft/draftldocs/. You
may submit a hard copy of your
comments to the address specified
below, to the attention of the individual
identified as point of contact for the
document.
Ms.
Linda Walker, AIR–140, Federal
Aviation Administration, Aircraft
Certification Service, Aircraft
Engineering Division, Room 813, 800
Independence Avenue, SW.,
Washington, DC 20591, telephone (202)
267–9592, Fax (2020 267–5340.
SUPPLEMENTARY INFORMATION:
FOR FURTHER INFORMATION CONTACT:
Comments Invited
When commenting on the draft Order,
you should identify the Order by its
number, 8040.2. Comments received
may be examined, both before and after
the closing date, in room 815 at the
above address, weekdays except Federal
holidays, between 8:30 a.m. and 4:40
p.m. The Director, Aircraft Certification
Service, will consider all comments
received on or before the closing date
before issuing a final document. You
may obtain a paper copy of the draft
Order by contacting the individual
listed above, or obtain an electronic
copy of the draft Order at: https://
www.faa.gov/aircraft/draftldocs/. For
Internet retrieval assistance, contact the
AIR Internet Content Program Manager
at (202) 267–8361.
PO 00000
Frm 00090
Fmt 4703
Sfmt 4703
28075
Background
The FAA proposes prototyping a new
process for the issuance of airworthiness
directives (AD) for imported products
where the State of Design Authority
issued mandatory continuing
airworthiness information (MCAI). In
the draft order we describe policies and
procedures for developing streamlined
ADs issued against imported products.
This streamlining will allow publishing
of the ADs in a more expeditious
manner, thereby ensuring the continued
safety of the flying public in a more
timely fashion. This process will
continue to follow all existing AD
issuance processes to meet legal,
economic, Administrative Procedure
Act, and Federal Register requirements.
Our Aircraft Certification Directorates
will soon begin issuing individual ADs
to prototype the streamlined process
described in the draft order. Please note,
in addition to the normal request for
comments pertaining to the actual AD,
we will request your comments, views,
or arguments on the new process.
How to Obtain Copies
You may view or download the draft
order from its online location at
https://www.faa.gov/aircraft/draftldocs/
. At this Web page, under Draft
Documents Open for Comment, select
‘‘Orders.’’ At the Orders page, select
‘‘Proposed Orders.’’
Issued in Washington, DC, on May 9, 2006.
David Hempe,
Manager, Aircraft Engineering Division,
Aircraft Certification Service.
[FR Doc. 06–4525 Filed 5–12–06; 8:45 am]
BILLING CODE 4910–13–M
DEPARTMENT OF TRANSPORTATION
Federal Highway Administration
Environmental Impact Statement;
Kandiyohi County, MN
Federal Highway
Administration (FHWA), DOT.
ACTION: Notice of intent.
AGENCY:
SUMMARY: The FHWA is issuing this
notice to advise the public that an
environmental impact statement (EIS)
will be prepared for proposed highway
improvements to Trunk Highway (TH)
71 and TH 23 from the Willmar Bypass
to the north junction of TH 71 and TH
23, located northeast of the City of
Willmar in Dovre Township, a distance
of approximately 3.5 miles, in
Kandiyohi County, Minnesota.
FOR FURTHER INFORMATION CONTACT:
Cheryl Martin, Federal Highway
Administration, Galtier Plaza, Suite 500,
E:\FR\FM\15MYN1.SGM
15MYN1
]]>Agencies
[Federal Register Volume 71, Number 93 (Monday, May 15, 2006)]
[Notices]
[Page 28075]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 06-4525]
-----------------------------------------------------------------------
DEPARTMENT OF TRANSPORTATION
Federal Aviation Administration
Draft Order 8040.2, Airworthiness Directive Process for Mandatory
Continuing Airworthiness Information
AGENCY: Federal Aviation Administration (DOT).
ACTION: Notice of availability and request for public comment.
-----------------------------------------------------------------------
SUMMARY: This notice announces the availability of, and requests
comments on draft Order 8040.2, Airworthiness Directive Process for
Mandatory Continuing Airworthiness Information. The draft order
describes new policy and procedures for developing and issuing Federal
Aviation Administration (FAA) airworthiness directives (AD) on imported
products where the State of Design Authority issued mandatory
continuing airworthiness information (MCAI). The process will allow for
a timelier issuance of ADs.
DATES: Comments must be received on or before June 14, 2006.
ADDRESSES: Send your comments on the draft Order electronically by
logging onto the following Web site: https://www.faa.gov/aircraft/
draft_docs/. You may submit a hard copy of your comments to the
address specified below, to the attention of the individual identified
as point of contact for the document.
FOR FURTHER INFORMATION CONTACT: Ms. Linda Walker, AIR-140, Federal
Aviation Administration, Aircraft Certification Service, Aircraft
Engineering Division, Room 813, 800 Independence Avenue, SW.,
Washington, DC 20591, telephone (202) 267-9592, Fax (2020 267-5340.
SUPPLEMENTARY INFORMATION:
Comments Invited
When commenting on the draft Order, you should identify the Order
by its number, 8040.2. Comments received may be examined, both before
and after the closing date, in room 815 at the above address, weekdays
except Federal holidays, between 8:30 a.m. and 4:40 p.m. The Director,
Aircraft Certification Service, will consider all comments received on
or before the closing date before issuing a final document. You may
obtain a paper copy of the draft Order by contacting the individual
listed above, or obtain an electronic copy of the draft Order at:
https://www.faa.gov/aircraft/draft_docs/. For Internet retrieval
assistance, contact the AIR Internet Content Program Manager at (202)
267-8361.
Background
The FAA proposes prototyping a new process for the issuance of
airworthiness directives (AD) for imported products where the State of
Design Authority issued mandatory continuing airworthiness information
(MCAI). In the draft order we describe policies and procedures for
developing streamlined ADs issued against imported products. This
streamlining will allow publishing of the ADs in a more expeditious
manner, thereby ensuring the continued safety of the flying public in a
more timely fashion. This process will continue to follow all existing
AD issuance processes to meet legal, economic, Administrative Procedure
Act, and Federal Register requirements.
Our Aircraft Certification Directorates will soon begin issuing
individual ADs to prototype the streamlined process described in the
draft order. Please note, in addition to the normal request for
comments pertaining to the actual AD, we will request your comments,
views, or arguments on the new process.
How to Obtain Copies
You may view or download the draft order from its online location
at https://www.faa.gov/aircraft/draft_docs/. At this Web page, under
Draft Documents Open for Comment, select ``Orders.'' At the Orders
page, select ``Proposed Orders.''
Issued in Washington, DC, on May 9, 2006.
David Hempe,
Manager, Aircraft Engineering Division, Aircraft Certification Service.
[FR Doc. 06-4525 Filed 5-12-06; 8:45 am]
BILLING CODE 4910-13-M
