Certain New Chemicals; Receipt and Status Information, 27717-27721 [E6-7217]
Download as PDF
<![CDATA[
Federal Register / Vol. 71, No. 92 / Friday, May 12, 2006 / Notices
from the EPA, U.S. Coast Guard, U.S.
Navy, MARAD, U.S. Army Corps of
Engineers, National Oceanic and
Atmospheric Administration, and the
U.S. Fish and Wildlife Service.
On August 2, 2004, EPA published a
notice of availability of the Draft
National Guidance: Best Management
Practices for Preparing Vessels Intended
to Create Artificial Reefs for public
comment. See section I.B. of today’s
notice for information about viewing
these public comments and EPA’s
response to comments document.
III. Today’s Action
sroberts on PROD1PC70 with NOTICES
Today’s notice announces the
availability of the final BMP guidance.
This final guidance reflects the input of
the Federal workgroup and public
comments received on the Draft
National Guidance: Best Management
Practices for Preparing Vessels Intended
to Create Artificial Reefs (60 FR 46141).
The guidance describes guidelines for
the preparation of obsolete and
decommissioned military and
commercial vessels in a manner that is
intended to help ensure that the marine
environment will benefit from their use
as an artificial reef. The guidance
identifies materials or categories of
materials of concern that may be present
aboard vessels, indicates where these
materials may be found, and briefly
describes their potential adverse
impacts if released into the marine
environment. The materials of concern
include: Fuels and oil, asbestos,
polychlorinated biphenyls (PCBs),
paints, debris (e.g., vessel debris,
floatables, introduced material), and
other materials of environmental
concern (e.g., mercury, refrigerants). For
each material or category of material of
concern identified, the guidance
provides a general clean-up
performance goal and information on
methods for attaining those clean-up
goals when preparing a vessel prior to
sinking. Achieving the clean-up
performance goals provided in this
guidance, coupled with strategic reef
site selection, will help maximize the
environmental benefits of using vessels
as artificial reefs.
Dated: May 5, 2006.
Benjamin H. Grumbles,
Assistant Administrator for Water.
[FR Doc. E6–7274 Filed 5–11–06; 8:45 am]
BILLING CODE 6560–50–P
VerDate Aug<31>2005
16:54 May 11, 2006
Jkt 208001
ENVIRONMENTAL PROTECTION
AGENCY
[EPA–HQ–OPPT–2006–0434; FRL–8069–1]
Certain New Chemicals; Receipt and
Status Information
Environmental Protection
Agency (EPA).
ACTION: Notice.
AGENCY:
SUMMARY: Section 5 of the Toxic
Substances Control Act (TSCA) requires
any person who intends to manufacture
(defined by statute to include import) a
new chemical (i.e., a chemical not on
the TSCA Inventory) to notify EPA and
comply with the statutory provisions
pertaining to the manufacture of new
chemicals. Under sections 5(d)(2) and
5(d)(3) of TSCA, EPA is required to
publish a notice of receipt of a
premanufacture notice (PMN) or an
application for a test marketing
exemption (TME), and to publish
periodic status reports on the chemicals
under review and the receipt of notices
of commencement to manufacture those
chemicals. This status report, which
covers the period from April 10, 2006 to
April 28, 2006, consists of the PMNs
pending or expired, and the notices of
commencement to manufacture a new
chemical that the Agency has received
under TSCA section 5 during this time
period.
DATES: Comments identified by the
specific PMN number or TME number,
must be received on or before June 12,
2006.
ADDRESSES: Submit your comments,
identified by docket identification (ID)
no. EPA–HQ–OPPT–2006–0434, by one
of the following methods.
• https://www.regulations.gov. Follow
the on-line instructions for submitting
comments.
• Mail: Document Control Office
(7407M), Office of Pollution Prevention
and Toxics (OPPT), Environmental
Protection Agency, 1200 Pennsylvania
Ave., NW., Washington, DC 20460–
0001.
• Hand Delivery: OPPT Document
Control Office (DCO, EPA East Bldg.,
Rm. 6428, 1201 Constitution Ave., NW.,
Washington, DC. Attention: Docket ID
number EPA–HQ–OPPT–2006–0434.
The DCO is open from 8 a.m. to 4 p.m.,
Monday through Friday, excluding legal
holidays. The telephone number for the
DCO is (202) 564–8930. Such deliveries
are only accepted during the Docket’s
normal hours of operation, and special
arrangements should be made for
deliveries of boxed information.
• Instructions: Direct your comments
to docket ID number EPA–HQ–OPPT–
PO 00000
Frm 00057
Fmt 4703
Sfmt 4703
27717
2006–0434. EPA’s policy is that all
comments received will be included in
the public docket without change and
may be made available online at https://
www.regulations.gov, including any
personal information provided, unless
the comment includes information
claimed to be Confidential Business
Information (CBI) or other information
whose disclosure is restricted by statute.
Do not submit information that you
consider to be CBI or otherwise
protected through regulations.gov or email. The regulations.gov website is an
‘‘anonymous access’’ systems, which
means EPA will not know your identity
or contact information unless you
provide it in the body of your comment.
If you send an e-mail comment directly
to EPA without going through
regulations.gov your e-mail address will
be automatically captured and included
as part of the comment that is placed in
the public docket and made available on
the Internet. If you submit an electronic
comment, EPA recommends that you
include your name and other contact
information in the body of your
comment and with any disk or CD ROM
you submit. If EPA cannot read your
comment due to technical difficulties
and cannot contact you for clarification,
EPA may not be able to consider your
comment. Electronic files should avoid
the use of special characters, any form
of encryption, and be free of any defects
or viruses.
Docket: All documents in the docket
are listed in the regulations.gov index.
Although listed in the index, some
information is not publicly available,
i.e., CBI or other information whose
disclosure is restricted by statute.
Certain other material, such as
copyrighted material, is not placed on
the Internet and will be publicly
available only in hard copy form.
Publicly available docket materials are
available electronically through
regulations.gov or in hard copy at the
OPPT Docket, EPA Docket Center (EPA/
DC), EPA West, Room B102, 1301
Constitution Ave., NW., Washington,
DC. The EPA Docket Center Public
Reading Room is open from 8:30 a.m. to
4:30 p.m., Monday through Friday,
excluding legal holidays. The telephone
number for the Public Reading Room is
(202) 566–1744, and the telephone
number for the OPPT Docket is (202)
566–0280.
FOR FURTHER INFORMATION CONTACT:
Colby Lintner, Regulatory Coordinator,
Environmental Assistance Division,
Office of Pollution Prevention and
Toxics (7408M), Environmental
Protection Agency, 1200 Pennsylvania
Ave., NW., Washington, DC 20460–
E:\FR\FM\12MYN1.SGM
12MYN1
27718
Federal Register / Vol. 71, No. 92 / Friday, May 12, 2006 / Notices
0001; telephone number: (202) 554–
1404; e-mail address: TSCAHotline@epa.gov.
SUPPLEMENTARY INFORMATION:
I. General Information
A. Does this Action Apply to Me?
This action is directed to the public
in general. As such, the Agency has not
attempted to describe the specific
entities that this action may apply to.
Although others may be affected, this
action applies directly to the submitter
of the premanufacture notices addressed
in the action. If you have any questions
regarding the applicability of this action
to a particular entity, consult the person
listed under FOR FURTHER INFORMATION
CONTACT.
B. What Should I Consider as I Prepare
My Comments for EPA?
1. Submitting CBI. Do not submit this
information to EPA through
regulations.gov or e-mail. Clearly mark
the part or all of the information that
you claim to be CBI. For CBI
information in a disk or CD ROM that
you mail to EPA, mark the outside of the
disk or CD ROM as CBI and then
identify electronically within the disk or
CD ROM the specific information that is
claimed CBI). In addition to one
complete version of the comment that
includes information claimed as CBI, a
copy of the comment that does not
contain the information claimed as CBI
must be submitted for inclusion in the
public docket. Information so marked
will not be disclosed except in
accordance with procedures set forth in
40 CFR part 2.
2. Tips for preparing your comments.
When submitting comments, remember
to:
i. Identify the document by docket
number and other identifying
information (subject heading, Federal
Register date and page number).
ii. Follow directions - The agency may
ask you to respond to specific questions
or organize comments by referencing a
Code of Federal Regulations (CFR) part
or section number.
iii. Explain why you agree or disagree;
suggest alternatives and substitute
language for your requested changes.
iv. Describe any assumptions and
provide any technical information and/
or data that you used.
v. If you estimate potential costs or
burdens, explain how you arrived at the
estimate.
vi. Provide specific examples to
illustrate your concerns, and suggested
alternatives.
vii. Explain your views as clearly as
possible, avoiding the use of profanity
or personal threats.
viii. Make sure to submit your
comments by the comment period
deadline identified.
II. Why is EPA Taking this Action?
Section 5 of TSCA requires any
person who intends to manufacture
(defined by statute to include import) a
new chemical (i.e., a chemical not on
the TSCA Inventory to notify EPA and
comply with the statutory provisions
pertaining to the manufacture of new
chemicals. Under sections 5(d)(2) and
5(d)(3) of TSCA, EPA is required to
publish a notice of receipt of a PMN or
an application for a TME and to publish
periodic status reports on the chemicals
under review and the receipt of notices
of commencement to manufacture those
chemicals. This status report, which
covers the period from April 10, 2006 to
April 28, 2006, consists of the PMNs
pending or expired, and the notices of
commencement to manufacture a new
chemical that the Agency has received
under TSCA section 5 during this time
period.
III. Receipt and Status Report for PMNs
This status report identifies the PMNs
pending or expired, and the notices of
commencement to manufacture a new
chemical that the Agency has received
under TSCA section 5 during this time
period. If you are interested in
information that is not included in the
following tables, you may contact EPA
as described in Unit II. to access
additional non-CBI information that
may be available.
In Table I of this unit, EPA provides
the following information (to the extent
that such information is not claimed as
CBI) on the PMNs received by EPA
during this period: the EPA case number
assigned to the PMN; the date the PMN
was received by EPA; the projected end
date for EPA’s review of the PMN; the
submitting manufacturer; the potential
uses identified by the manufacturer in
the PMN; and the chemical identity.
I. 54 PREMANUFACTURE NOTICES RECEIVED FROM: 04/10/06 TO 04/28/06
Case No.
Received
Date
Projected
Notice
End Date
Manufacturer/Importer
Use
Chemical
(G) Potassium salt of phosphoric acid
of glycerol ethoxylate
(S) D-glucopyranose, oligomeric, bu
glycosides,
phosphinicobis[oxy(2hydroxy-3,1-propanediyl)]
ethers,
sodium salts
(S) D-glucopyranose, oligomeric, 2ethylhexyl
glycosides,
phosphinicobis[oxy(2-hydroxy-3,1propanediyl)] ethers, sodium salts
(S)
D-glucopyranose,
oligomeric,
decyl
octyl
glycosides,
phosphinicobis[oxy(2-hydroxy-3,1propanediyl)] ethers, sodium salts
(S)
D-glucopyranose,
oligomeric,
C10–16-alkyl
glycosides,
phosphinicobis[oxy(2-hydroxy-3,1propanediyl)] ethers, sodium salts
(S)
D-glucopyranose,
oligomeric,
C10–16-alkyl
glycosides,
phosphinicobis[oxy(2-hydroxy-3,1propanediyl)] ethers, sodium salts
(G) Amine neutralized phosphoric
acid ester
04/11/06
07/09/06
Dexter Chemical LLC
P–06–0412
04/11/06
07/09/06
Colonial Chemical,
Inc.
(G) Dispersing and freeze thaw stability for waterborne coatings.
(S) Hard surface cleaner in high
caustic solutions
P–06–0413
04/11/06
07/09/06
Colonial Chemical,
Inc.
(S) Hard surface cleaner in high
caustic solutions
P–06–0414
04/11/06
07/09/06
Colonial Chemical,
Inc.
(S) Hard surface cleaner in high
caustic solutions
P–06–0415
sroberts on PROD1PC70 with NOTICES
P–06–0411
04/11/06
07/09/06
Colonial Chemical,
Inc.
(S) Hard surface cleaner in high
caustic solutions
P–06–0416
04/11/06
07/09/06
Colonial Chemical,
Inc.
(S) Hard surface cleaner in high
caustic solutions
P–06–0417
04/11/06
07/09/06
CBI
(G) Antiwear additive (contained use)
VerDate Aug<31>2005
16:54 May 11, 2006
Jkt 208001
PO 00000
Frm 00058
Fmt 4703
Sfmt 4703
E:\FR\FM\12MYN1.SGM
12MYN1
27719
Federal Register / Vol. 71, No. 92 / Friday, May 12, 2006 / Notices
I. 54 PREMANUFACTURE NOTICES RECEIVED FROM: 04/10/06 TO 04/28/06—Continued
Case No.
Received
Date
Projected
Notice
End Date
Manufacturer/Importer
Use
Chemical
(S) Dodecanedioic acid, dihydrazine
(G) Alkanline earth aluminate-phosphate-silicate polycrystalline material:rare earth doped
(S) Butanedioic acic, methylene-,
polymer with 2,5-furandione, calcium salt, hydrogen peroxide-initiated
(G) Dimethyl, methylgycidoxypropyl,
methylglycol siloxanes
(G)
Alkanoic
acid,
2[[(alkylthio)thioxomethyl]thio]-2-akyl(G) 2-propenoic acid, 2-methyl-, 1,2ethanediyl ester, telomer with alkyl
2-[[(alkylthio)thioxomethyl]thio]-2methylalkanoate, alkyl methacrylate
and me methacrylate, tert-bu-2ethylhexaneperoxoate-initiated
(G) 2-propenoic acid, 2-methyl-, 1,2ethanediyl ester, telomer with alkyl
2-[[(alkylthio)thioxomethyl]thio]-2methylalkanoate, alkyl methacrylate
and me methacrylate, tert-bu-2ethylhexaneperoxoate-initiated
(G) 2-propenoic acid, 2-methyl-, 1,2ethanediyl ester, telomer with alkyl
2-[[(alkylthio)thioxomethyl]thio]-2methylalkanoate, alkyl methacrylate
and
me
methacrylate,
n(dimethylamino)alkyl]-2-methyl-2propenamide and me methacrylate,
tert-bu-2-ethylhexaneperoxoate initiated
(G) 2-propenoic acid, 2-methyl-, 1,2ethanediyl ester, telomer with alkyl
2-[[(alkylthio)thioxomethyl]thio]-2(dimethylamino) alkyl methacrylate
methylalkanoate, alkyl methacrylate
and me methacrylate, tert-bu-2ethylhexaneperoxoate-initiated
(G) 2-propenoic acid, 2-methyl-, 1,2ethanediyl ester, telomer with alkyl
2-[[(alkylthio)thioxomethyl]thio]-2methylalkanoate, alkyl methacrylate
N-(dimethylamino)-2
methyl-2
propenamide and me methacrylate,
tert-bu-2-ethylhexaneperoxoate-initiated
(G) 2-propenoic acid, 2-methyl-, 1,2ethanediyl ester, telomer with alkyl
2-[[(alkylthio)thioxomethyl]thio]-2methylalkanoate, alkyl methacrylate
2-(dimethylamino) alkyl and me
methacrylate,
tert-bu-2ethylhexaneperoxoate-initiated
(G) Polyoxyalkylene siloxane
04/11/06
04/11/06
07/09/06
07/09/06
MEP America
Photoluminous Imports
USA, LLC
(S) Additive of polyacetals
(G) Additive for glow-in-the-dark effect
P–06–0420
04/12/06
07/10/06
Specialty Fertilizer
LLC
(G) nitrogen voltilization inhibitor
P–06–0421
04/12/06
07/10/06
CBI
(G) Epoxy mold compound
P–06–0422
04/12/06
07/10/06
CBI
P–06–0423
04/12/06
07/10/06
CBI
(G) Intermediate used to make chain
transfer agents for polymerizations
(G) Lubricant additive
P–06–0424
04/12/06
07/10/06
CBI
(G) Lubricant additive
P–06–0425
04/12/06
07/10/06
CBI
(G) Lubricant additive
P–06–0426
04/12/06
07/10/06
CBI
(G) Lubricant additive
P–06–0427
04/12/06
07/10/06
CBI
(G) Lubricant additive
P–06–0428
04/12/06
07/10/06
CBI
(G) Lubricant additive
P–06–0429
04/12/06
07/10/06
CBI
P–06–0430
04/12/06
07/10/06
CBI
P–06–0431
sroberts on PROD1PC70 with NOTICES
P–06–0418
P–06–0419
04/13/06
07/11/06
CBI
P–06–0432
04/12/06
07/10/06
CBI
(S) Dispersing agent for crop protection; dispersing agent for home
care cleaners
(S) Dispersing agent for crop protection; dispersing agent for home
care cleaners
(S) Tackifiers in hot melt and pressure sensitive adhesives.
(G) Chain transfer agents for polymerizations.
P–06–0433
04/12/06
07/10/06
CBI
(G) Chain transfer agents for polymerizations.
P–06–0434
04/13/06
07/11/06
CBI
(G) Additive
VerDate Aug<31>2005
16:54 May 11, 2006
Jkt 208001
PO 00000
Frm 00059
Fmt 4703
Sfmt 4703
E:\FR\FM\12MYN1.SGM
(G) Polyoxyalkylene siloxane
(G) Styrenated terpene resin.
(G)
Alkanoic
acid,
[[(alkylthio)thioxomethyl[thio]-2methyl-, alkyl ester
(G)
Alkanoic
acid,
[[(alkylthio)thioxomethyl[thio]-2methyl-, alkyl ester
(G) Treated silica
12MYN1
22-
27720
Federal Register / Vol. 71, No. 92 / Friday, May 12, 2006 / Notices
I. 54 PREMANUFACTURE NOTICES RECEIVED FROM: 04/10/06 TO 04/28/06—Continued
Case No.
Received
Date
Projected
Notice
End Date
Manufacturer/Importer
Use
Chemical
(G) Hydridosiloxane
(G) Fatty acids, C18-unsaturated,
dimers, hydrogenated, polymers
with polypropylene glycol diamine
and polyoxyalkylenepolyamine.
(G) Fatty acids, C18-unsaturated,
dimers,
polymers
with
polypropylene glycol diamine and
polyoxyalkylenepolyamine.
(G) Fatty acids, C18-unsaturated,
dimers, hydrogenated, polymers
with polypropylene glycol diamine,
amino
acid
and
polyoxyalkylenepolyamine.
(G) Fatty acids, C18-unsaturated,
dimers,
polymers
with
polypropylene glycol diamine, amino
acid and polyoxyalkylenepolyamine.
(G) Alkylamine, reaction products with
alkoxylated polyalcohol and substituted alkane
(G) Maleimide alkyl carboxylic acid
04/13/06
04/13/06
07/11/06
07/11/06
CBI
CBI
(S) Intermediate
(S) Curing agent in solid gel air fresheners
P–06–0437
04/13/06
07/11/06
CBI
(S) Curing agent in solid gel air fresheners
P–06–0438
04/13/06
07/11/06
CBI
(S) Curing agent in solid gel air fresheners
P–06–0439
04/13/06
07/11/06
CBI
(S) Curing agent in solid gel air fresheners
P–06–0440
04/14/06
07/12/06
Cytec Surface Specialties Inc.
(G) Coatings and inks
P–06–0441
04/14/06
07/12/06
CBI
P–06–0442
04/17/06
07/15/06
04/14/06
07/12/06
P–06–0444
04/19/06
07/17/06
Cytec Surface Specialties Inc.
Photoluminous Imports
USA, LLC
CBI
(G)
Electronics
adhesives,
encapsulants and conformational
coatings
(S) Resin for paints and coatings
P–06–0443
P–06–0445
04/20/06
07/18/06
CBI
(G) Coating component
P–06–0446
04/20/06
07/18/06
CBI
(G) Open, non-dispersive use.
P–06–0447
04/20/06
07/18/06
CBI
(G) Polymer film
P–06–0448
04/21/06
07/19/06
04/24/06
07/22/06
Surface Chemists of
Florida, Inc.
Werner G. Smith, Inc.
(G) Asphalt additive
P–06–0449
P–06–0450
04/24/06
07/22/06
Colonial Chemical,
Inc.
(S) Wetting agent for low foam spray
metal cleaning
P–06–0451
04/24/06
07/22/06
Colonial Chemical,
Inc.
(S) Wetting agent for low foam spray
metal cleaning
P–06–0452
04/24/06
07/22/06
Colonial Chemical,
Inc.
(S) Wetting agent for low foam spray
metal cleaning
P–06–0453
04/25/06
07/23/06
04/25/06
04/25/06
04/26/06
07/23/06
07/19/06
07/24/06
Eastman Chemical
Company
CBI
CBI
CBI
(S) Adhesion promoter for paints
P–06–0454
P–06–0455
P–06–0456
P–06–0457
04/27/06
07/25/06
(G) Floor coating
04/27/06
07/25/06
(G) Polymer modifier
(G) Magnesium salt of fatty acid
P–06–0459
04/27/06
07/25/06
(G) Polymer modifier
(G) Calcium salt of fatty acid
P–06–0460
04/27/06
07/25/06
The Sherwin-Williams
Co.
E.I. Du Pont De Nemours and Company Inc.
E.I. Du Pont De Nemours and Company Inc.
E.I. Du Pont De Nemours and Company Inc.
(G) Modified phenol resin
(G) Modified phenol resin
(G) Polyester, polymer with trimethylol
propane and tetrahydrophthalic anhydride
(G) Silico titanate ester
P–06–0458
sroberts on PROD1PC70 with NOTICES
P–06–0435
P–06–0436
(G) Polymer modifier
(G) Zinc sakt of fatty acid
VerDate Aug<31>2005
16:54 May 11, 2006
Jkt 208001
PO 00000
Frm 00060
(G) Additive for glow-in-the-dark effect
(G) Chemical intermediate
(G) metal working fluid
(G) Polymer dispersant admixture
(G) Polymer dispersant admixture
(G) Polyester
Fmt 4703
Sfmt 4703
E:\FR\FM\12MYN1.SGM
(G) Substituted carbo-monocycle,
polymer with substituted glycols
(G) Alkaline earth fluoaluminate or
fluoaluminate, rare earth doped
(G) 2-butanone, 3,3-dimethyl-1-[3-(4nitrophenyl)-heteromonocycle
(G) Acrylic acid, polymer with substituted acrylates
(G) Amine functional acrylic-styrene
polymer
(G) Dimethyl terephthalate sulfonate
alkanediol copolymer
(G) Fatty acid salt of alkyldiamine
(S) Hexanedioic acid, mixed esters
with
4-methyl-2-propyl-1-hexanol,
pentaerythritol
and
2-propyl-1heptanol
(S) Poly(oxy-1,2-ethanediyl), .alpha.(2-methyl-2-propenyl)-.omega.-hydroxy-, c12-15-alkyl ethers
(S) Poly(oxy-1,2-ethanediyl), .alpha.(2-methyl-2-propenyl)-.omega.-hydroxy-, C10–16-alkyl ethers
(S) Poly(oxy-1,2-ethanediyl), .alpha.(2-methyl-2-propenyl)-.omega.-hydroxy-, C12–16-alkyl ethers
(G) Modified polylolefin
12MYN1
27721
Federal Register / Vol. 71, No. 92 / Friday, May 12, 2006 / Notices
I. 54 PREMANUFACTURE NOTICES RECEIVED FROM: 04/10/06 TO 04/28/06—Continued
Received
Date
Case No.
Projected
Notice
End Date
P–06–0461
04/27/06
07/25/06
P–06–0462
04/28/06
07/26/06
P–06–0463
04/28/06
07/26/06
P–06–0464
04/28/06
07/26/06
Manufacturer/Importer
Use
E.I.Du Pont De Nemours and Company Inc.
CIBA Specialty Chemicals Corporation
Chemitall Foote Corporation
(G) Polymer modifier
(G) Lithium salt of fatty acid
(S) Clarifer for polymers, primarily
polypropylene
(G) Electrolyte
Bedoukian Research,
Inc.
(S) Chemical intermediate
(G)
2,2-alkyl-N,N′,N′′-aryltriyltris
propanamide
(S) Borate(1-), bis [ethanedioato (2-).kappa. 01, .kappa. 02] -lithium, (t4)(S) 3-decanol
In Table II of this unit, EPA provides
the following information (to the extent
that such information is not claimed as
Chemical
CBI) on the Notices of Commencement
to manufacture received:
II. 25 NOTICES OF COMMENCEMENT FROM: 04/10/06 TO 04/28/06
Case No.
Received Date
Commencement
Notice End Date
P–00–0887
P–05–0290
04/10/06
04/12/06
04/04/05
03/28/06
P–05–0704
P–05–0705
P–06–0011
P–06–0027
P–06–0028
P–03–0751
P–05–0402
04/10/06
04/10/06
04/10/06
04/11/06
04/11/06
04/17/06
04/18/06
03/15/06
03/15/06
03/30/06
03/01/06
01/19/06
03/30/06
04/11/06
P–05–0403
04/18/06
04/11/06
P–05–0446
04/25/06
03/29/06
P–05–0733
P–05–0766
04/27/06
04/26/06
04/24/06
03/30/06
P–05–0819
P–05–0829
04/14/06
04/17/06
03/29/06
03/12/06
P–05–0831
04/17/06
03/12/06
P–06–0006
P–06–0014
P–06–0095
P–06–0107
P–06–0156
04/26/06
04/27/06
04/20/06
04/25/06
04/28/06
04/13/06
04/25/06
03/24/06
03/25/06
04/14/06
P–94–0651
P–95–1489
P–98–0066
P–98–0067
04/17/06
04/21/06
04/19/06
04/19/06
04/07/06
03/29/06
03/27/06
04/02/06
List of Subjects
sroberts on PROD1PC70 with NOTICES
Environmental protection, Chemicals,
Premanufacturer notices.
Chemical
(G) Polyester polyether isocyanate polymer
(G) Alkanediocic acid, polymer with 1,3,5-tris(substituted alkyl)-1,3,5-triazine2,4,6(1h,3h,5h)-trione, alkanoate (ester) 3-substituted-2-(substituted alkyl)-2alkanoate (ester)
(G) Silylated urethane resin
(G) Silylated urethane resin
(G) Isocyanate functional polyester polyether urethane polymer
(G) Polyester acrylate oligomer
(G) Polyester acrylate oligomer
(G) Polyacrylic resin
(G) Arene,alkenyl-, homopolymer, hydroxyaromatic carboxylic acid-terminated,
metal complexes
(G) Alkylaldehyde, polymer with alkylarenol, hydroxyaromatic carboxylic acidterminated, metal complexes
(G) 1-propanaminium, 2,3-dihydroxy-N,N-dimethyl-n-[3-[(fatty acid)amino]propyl,chloride
(G) Urethane modified epoxy resin
(S) Poly[oxy(methyl-1,2-ethanediyl)], .alpha.-methyl-.omega.-(4-nonylphenoxy),branched
(G) Oxazolidine functional acrylic polyol
(S) 1-naphthalenesulfonic acid, 2-[[2-hydroxy-3-[(phenylamino)carbonyl]-1naphthalenyl]azo]-, calcium salt (2:1)
(S) Benzenesulfonic acid, 2-chloro-5-[[2-hydroxy-3-[(phenylamino)carbonyl]-1naphthalenyl]azo]-, calcium salt (2:1)
(S) Oils, apple
(G) Aminocarboxylic acid chelating agent
(G) Organo barium salt
(G) Aminophenyl substituted pyrazolone
(S) Silane, ethenyltrimethoxy-, reaction products with 1-butene-ethylenepropene polymer
(G) Polyester isocyanate prepolymer
(G) Polyester polyether isocyanate prepolymer
(S) 1-dodecanol, manufurer. of, distn. lights
(S) 1-tetradecanol, manufurer. of distn. lights
Dated: May 5, 2006.
LaRona M. Washington,
Acting Director, Information Management
Division, Office of Pollution Prevention and
Toxics.
[FR Doc. E6–7217 Filed 5–11–06; 8:45 am]
ENVIRONMENTAL PROTECTION
AGENCY
[FRL–8169–1]
Connecticut Sanitation Device
Standard; Notice of Determination
BILLING CODE 6560–50–S
This Notice of Determination is for all
Connecticut waters between Eastern
Point in Groton, to Hoadley Point in
VerDate Aug<31>2005
16:54 May 11, 2006
Jkt 208001
PO 00000
Frm 00061
Fmt 4703
Sfmt 4703
E:\FR\FM\12MYN1.SGM
12MYN1
]]>Agencies
[Federal Register Volume 71, Number 92 (Friday, May 12, 2006)]
[Notices]
[Pages 27717-27721]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: E6-7217]
-----------------------------------------------------------------------
ENVIRONMENTAL PROTECTION AGENCY
[EPA-HQ-OPPT-2006-0434; FRL-8069-1]
Certain New Chemicals; Receipt and Status Information
AGENCY: Environmental Protection Agency (EPA).
ACTION: Notice.
-----------------------------------------------------------------------
SUMMARY: Section 5 of the Toxic Substances Control Act (TSCA) requires
any person who intends to manufacture (defined by statute to include
import) a new chemical (i.e., a chemical not on the TSCA Inventory) to
notify EPA and comply with the statutory provisions pertaining to the
manufacture of new chemicals. Under sections 5(d)(2) and 5(d)(3) of
TSCA, EPA is required to publish a notice of receipt of a
premanufacture notice (PMN) or an application for a test marketing
exemption (TME), and to publish periodic status reports on the
chemicals under review and the receipt of notices of commencement to
manufacture those chemicals. This status report, which covers the
period from April 10, 2006 to April 28, 2006, consists of the PMNs
pending or expired, and the notices of commencement to manufacture a
new chemical that the Agency has received under TSCA section 5 during
this time period.
DATES: Comments identified by the specific PMN number or TME number,
must be received on or before June 12, 2006.
ADDRESSES: Submit your comments, identified by docket identification
(ID) no. EPA-HQ-OPPT-2006-0434, by one of the following methods.
https://www.regulations.gov. Follow the on-line
instructions for submitting comments.
Mail: Document Control Office (7407M), Office of Pollution
Prevention and Toxics (OPPT), Environmental Protection Agency, 1200
Pennsylvania Ave., NW., Washington, DC 20460-0001.
Hand Delivery: OPPT Document Control Office (DCO, EPA East
Bldg., Rm. 6428, 1201 Constitution Ave., NW., Washington, DC.
Attention: Docket ID number EPA-HQ-OPPT-2006-0434. The DCO is open from
8 a.m. to 4 p.m., Monday through Friday, excluding legal holidays. The
telephone number for the DCO is (202) 564-8930. Such deliveries are
only accepted during the Docket's normal hours of operation, and
special arrangements should be made for deliveries of boxed
information.
Instructions: Direct your comments to docket ID number
EPA-HQ-OPPT-2006-0434. EPA's policy is that all comments received will
be included in the public docket without change and may be made
available online at https://www.regulations.gov, including any personal
information provided, unless the comment includes information claimed
to be Confidential Business Information (CBI) or other information
whose disclosure is restricted by statute. Do not submit information
that you consider to be CBI or otherwise protected through
regulations.gov or e-mail. The regulations.gov website is an
``anonymous access'' systems, which means EPA will not know your
identity or contact information unless you provide it in the body of
your comment. If you send an e-mail comment directly to EPA without
going through regulations.gov your e-mail address will be automatically
captured and included as part of the comment that is placed in the
public docket and made available on the Internet. If you submit an
electronic comment, EPA recommends that you include your name and other
contact information in the body of your comment and with any disk or CD
ROM you submit. If EPA cannot read your comment due to technical
difficulties and cannot contact you for clarification, EPA may not be
able to consider your comment. Electronic files should avoid the use of
special characters, any form of encryption, and be free of any defects
or viruses.
Docket: All documents in the docket are listed in the
regulations.gov index. Although listed in the index, some information
is not publicly available, i.e., CBI or other information whose
disclosure is restricted by statute. Certain other material, such as
copyrighted material, is not placed on the Internet and will be
publicly available only in hard copy form. Publicly available docket
materials are available electronically through regulations.gov or in
hard copy at the OPPT Docket, EPA Docket Center (EPA/DC), EPA West,
Room B102, 1301 Constitution Ave., NW., Washington, DC. The EPA Docket
Center Public Reading Room is open from 8:30 a.m. to 4:30 p.m., Monday
through Friday, excluding legal holidays. The telephone number for the
Public Reading Room is (202) 566-1744, and the telephone number for the
OPPT Docket is (202) 566-0280.
FOR FURTHER INFORMATION CONTACT: Colby Lintner, Regulatory Coordinator,
Environmental Assistance Division, Office of Pollution Prevention and
Toxics (7408M), Environmental Protection Agency, 1200 Pennsylvania
Ave., NW., Washington, DC 20460-
[[Page 27718]]
0001; telephone number: (202) 554-1404; e-mail address: TSCA-
Hotline@epa.gov.
SUPPLEMENTARY INFORMATION:
I. General Information
A. Does this Action Apply to Me?
This action is directed to the public in general. As such, the
Agency has not attempted to describe the specific entities that this
action may apply to. Although others may be affected, this action
applies directly to the submitter of the premanufacture notices
addressed in the action. If you have any questions regarding the
applicability of this action to a particular entity, consult the person
listed under FOR FURTHER INFORMATION CONTACT.
B. What Should I Consider as I Prepare My Comments for EPA?
1. Submitting CBI. Do not submit this information to EPA through
regulations.gov or e-mail. Clearly mark the part or all of the
information that you claim to be CBI. For CBI information in a disk or
CD ROM that you mail to EPA, mark the outside of the disk or CD ROM as
CBI and then identify electronically within the disk or CD ROM the
specific information that is claimed CBI). In addition to one complete
version of the comment that includes information claimed as CBI, a copy
of the comment that does not contain the information claimed as CBI
must be submitted for inclusion in the public docket. Information so
marked will not be disclosed except in accordance with procedures set
forth in 40 CFR part 2.
2. Tips for preparing your comments. When submitting comments,
remember to:
i. Identify the document by docket number and other identifying
information (subject heading, Federal Register date and page number).
ii. Follow directions - The agency may ask you to respond to
specific questions or organize comments by referencing a Code of
Federal Regulations (CFR) part or section number.
iii. Explain why you agree or disagree; suggest alternatives and
substitute language for your requested changes.
iv. Describe any assumptions and provide any technical information
and/or data that you used.
v. If you estimate potential costs or burdens, explain how you
arrived at the estimate.
vi. Provide specific examples to illustrate your concerns, and
suggested alternatives.
vii. Explain your views as clearly as possible, avoiding the use of
profanity or personal threats.
viii. Make sure to submit your comments by the comment period
deadline identified.
II. Why is EPA Taking this Action?
Section 5 of TSCA requires any person who intends to manufacture
(defined by statute to include import) a new chemical (i.e., a chemical
not on the TSCA Inventory to notify EPA and comply with the statutory
provisions pertaining to the manufacture of new chemicals. Under
sections 5(d)(2) and 5(d)(3) of TSCA, EPA is required to publish a
notice of receipt of a PMN or an application for a TME and to publish
periodic status reports on the chemicals under review and the receipt
of notices of commencement to manufacture those chemicals. This status
report, which covers the period from April 10, 2006 to April 28, 2006,
consists of the PMNs pending or expired, and the notices of
commencement to manufacture a new chemical that the Agency has received
under TSCA section 5 during this time period.
III. Receipt and Status Report for PMNs
This status report identifies the PMNs pending or expired, and the
notices of commencement to manufacture a new chemical that the Agency
has received under TSCA section 5 during this time period. If you are
interested in information that is not included in the following tables,
you may contact EPA as described in Unit II. to access additional non-
CBI information that may be available.
In Table I of this unit, EPA provides the following information (to
the extent that such information is not claimed as CBI) on the PMNs
received by EPA during this period: the EPA case number assigned to the
PMN; the date the PMN was received by EPA; the projected end date for
EPA's review of the PMN; the submitting manufacturer; the potential
uses identified by the manufacturer in the PMN; and the chemical
identity.
I. 54 Premanufacture Notices Received From: 04/10/06 to 04/28/06
--------------------------------------------------------------------------------------------------------------------------------------------------------
Projected Notice End
Case No. Received Date Date Manufacturer/Importer Use Chemical
--------------------------------------------------------------------------------------------------------------------------------------------------------
P-06-0411 04/11/06 07/09/06 Dexter Chemical LLC (G) Dispersing and (G) Potassium salt of
freeze thaw phosphoric acid of
stability for glycerol ethoxylate
waterborne coatings.
P-06-0412 04/11/06 07/09/06 Colonial Chemical, (S) Hard surface (S) D-glucopyranose,
Inc. cleaner in high oligomeric, bu
caustic solutions glycosides,
phosphinicobis[oxy(2-
hydroxy-3,1-
propanediyl)]
ethers, sodium salts
P-06-0413 04/11/06 07/09/06 Colonial Chemical, (S) Hard surface (S) D-glucopyranose,
Inc. cleaner in high oligomeric, 2-
caustic solutions ethylhexyl
glycosides,
phosphinicobis[oxy(2-
hydroxy-3,1-
propanediyl)]
ethers, sodium salts
P-06-0414 04/11/06 07/09/06 Colonial Chemical, (S) Hard surface (S) D-glucopyranose,
Inc. cleaner in high oligomeric, decyl
caustic solutions octyl glycosides,
phosphinicobis[oxy(2-
hydroxy-3,1-
propanediyl)]
ethers, sodium salts
P-06-0415 04/11/06 07/09/06 Colonial Chemical, (S) Hard surface (S) D-glucopyranose,
Inc. cleaner in high oligomeric, C10 16-
caustic solutions alkyl glycosides,
phosphinicobis[oxy(2-
hydroxy-3,1-
propanediyl)]
ethers, sodium salts
P-06-0416 04/11/06 07/09/06 Colonial Chemical, (S) Hard surface (S) D-glucopyranose,
Inc. cleaner in high oligomeric, C10 16-
caustic solutions alkyl glycosides,
phosphinicobis[oxy(2-
hydroxy-3,1-
propanediyl)]
ethers, sodium salts
P-06-0417 04/11/06 07/09/06 CBI (G) Antiwear additive (G) Amine neutralized
(contained use) phosphoric acid
ester
[[Page 27719]]
P-06-0418 04/11/06 07/09/06 MEP America (S) Additive of (S) Dodecanedioic
polyacetals acid, dihydrazine
P-06-0419 04/11/06 07/09/06 Photoluminous Imports (G) Additive for glow- (G) Alkanline earth
USA, LLC in-the-dark effect aluminate-phosphate-
silicate
polycrystalline
material:rare earth
doped
P-06-0420 04/12/06 07/10/06 Specialty Fertilizer (G) nitrogen (S) Butanedioic acic,
LLC voltilization methylene-, polymer
inhibitor with 2,5-furandione,
calcium salt,
hydrogen peroxide-
initiated
P-06-0421 04/12/06 07/10/06 CBI (G) Epoxy mold (G) Dimethyl,
compound methylgycidoxypropyl
, methylglycol
siloxanes
P-06-0422 04/12/06 07/10/06 CBI (G) Intermediate used (G) Alkanoic acid, 2-
to make chain [[(alkylthio)thioxom
transfer agents for ethyl]thio]-2-akyl-
polymerizations
P-06-0423 04/12/06 07/10/06 CBI (G) Lubricant (G) 2-propenoic acid,
additive 2-methyl-, 1,2-
ethanediyl ester,
telomer with alkyl 2-
[[(alkylthio)thioxom
ethyl]thio]-2-
methylalkanoate,
alkyl methacrylate
and me methacrylate,
tert-bu-2-
ethylhexaneperoxoate-
initiated
P-06-0424 04/12/06 07/10/06 CBI (G) Lubricant (G) 2-propenoic acid,
additive 2-methyl-, 1,2-
ethanediyl ester,
telomer with alkyl 2-
[[(alkylthio)thioxom
ethyl]thio]-2-
methylalkanoate,
alkyl methacrylate
and me methacrylate,
tert-bu-2-
ethylhexaneperoxoate-
initiated
P-06-0425 04/12/06 07/10/06 CBI (G) Lubricant (G) 2-propenoic acid,
additive 2-methyl-, 1,2-
ethanediyl ester,
telomer with alkyl 2-
[[(alkylthio)thioxom
ethyl]thio]-2-
methylalkanoate,
alkyl methacrylate
and me methacrylate,
n-
(dimethylamino)alkyl
]-2-methyl-2-
propenamide and me
methacrylate, tert-
bu-2-
ethylhexaneperoxoate
initiated
P-06-0426 04/12/06 07/10/06 CBI (G) Lubricant (G) 2-propenoic acid,
additive 2-methyl-, 1,2-
ethanediyl ester,
telomer with alkyl 2-
[[(alkylthio)thioxom
ethyl]thio]-2-
(dimethylamino)
alkyl methacrylate
methylalkanoate,
alkyl methacrylate
and me methacrylate,
tert-bu-2-
ethylhexaneperoxoate-
initiated
P-06-0427 04/12/06 07/10/06 CBI (G) Lubricant (G) 2-propenoic acid,
additive 2-methyl-, 1,2-
ethanediyl ester,
telomer with alkyl 2-
[[(alkylthio)thioxom
ethyl]thio]-2-
methylalkanoate,
alkyl methacrylate N-
(dimethylamino)-2
methyl-2 propenamide
and me methacrylate,
tert-bu-2-
ethylhexaneperoxoate-
initiated
P-06-0428 04/12/06 07/10/06 CBI (G) Lubricant (G) 2-propenoic acid,
additive 2-methyl-, 1,2-
ethanediyl ester,
telomer with alkyl 2-
[[(alkylthio)thioxom
ethyl]thio]-2-
methylalkanoate,
alkyl methacrylate 2-
(dimethylamino)
alkyl and me
methacrylate, tert-
bu-2-
ethylhexaneperoxoate-
initiated
P-06-0429 04/12/06 07/10/06 CBI (S) Dispersing agent (G) Polyoxyalkylene
for crop protection; siloxane
dispersing agent for
home care cleaners
P-06-0430 04/12/06 07/10/06 CBI (S) Dispersing agent (G) Polyoxyalkylene
for crop protection; siloxane
dispersing agent for
home care cleaners
P-06-0431 04/13/06 07/11/06 CBI (S) Tackifiers in hot (G) Styrenated
melt and pressure terpene resin.
sensitive adhesives.
P-06-0432 04/12/06 07/10/06 CBI (G) Chain transfer (G) Alkanoic acid, 2-
agents for [[(alkylthio)thioxom
polymerizations. ethyl[thio]-2-methyl-
, alkyl ester
P-06-0433 04/12/06 07/10/06 CBI (G) Chain transfer (G) Alkanoic acid, 2-
agents for [[(alkylthio)thioxom
polymerizations. ethyl[thio]-2-methyl-
, alkyl ester
P-06-0434 04/13/06 07/11/06 CBI (G) Additive (G) Treated silica
[[Page 27720]]
P-06-0435 04/13/06 07/11/06 CBI (S) Intermediate (G) Hydridosiloxane
P-06-0436 04/13/06 07/11/06 CBI (S) Curing agent in (G) Fatty acids, C18-
solid gel air unsaturated, dimers,
fresheners hydrogenated,
polymers with
polypropylene glycol
diamine and
polyoxyalkylenepolya
mine.
P-06-0437 04/13/06 07/11/06 CBI (S) Curing agent in (G) Fatty acids, C18-
solid gel air unsaturated, dimers,
fresheners polymers with
polypropylene glycol
diamine and
polyoxyalkylenepolya
mine.
P-06-0438 04/13/06 07/11/06 CBI (S) Curing agent in (G) Fatty acids, C18-
solid gel air unsaturated, dimers,
fresheners hydrogenated,
polymers with
polypropylene glycol
diamine, amino acid
and
polyoxyalkylenepolya
mine.
P-06-0439 04/13/06 07/11/06 CBI (S) Curing agent in (G) Fatty acids, C18-
solid gel air unsaturated, dimers,
fresheners polymers with
polypropylene glycol
diamine, amino acid
and
polyoxyalkylenepolya
mine.
P-06-0440 04/14/06 07/12/06 Cytec Surface (G) Coatings and inks (G) Alkylamine,
Specialties Inc. reaction products
with alkoxylated
polyalcohol and
substituted alkane
P-06-0441 04/14/06 07/12/06 CBI (G) Electronics (G) Maleimide alkyl
adhesives, carboxylic acid
encapsulants and
conformational
coatings
P-06-0442 04/17/06 07/15/06 Cytec Surface (S) Resin for paints (G) Substituted carbo-
Specialties Inc. and coatings monocycle, polymer
with substituted
glycols
P-06-0443 04/14/06 07/12/06 Photoluminous Imports (G) Additive for glow- (G) Alkaline earth
USA, LLC in-the-dark effect fluoaluminate or
fluoaluminate, rare
earth doped
P-06-0444 04/19/06 07/17/06 CBI (G) Chemical (G) 2-butanone, 3,3-
intermediate dimethyl-1-[3-(4-
nitrophenyl)-
heteromonocycle
P-06-0445 04/20/06 07/18/06 CBI (G) Coating component (G) Acrylic acid,
polymer with
substituted
acrylates
P-06-0446 04/20/06 07/18/06 CBI (G) Open, non- (G) Amine functional
dispersive use. acrylic-styrene
polymer
P-06-0447 04/20/06 07/18/06 CBI (G) Polymer film (G) Dimethyl
terephthalate
sulfonate alkanediol
copolymer
P-06-0448 04/21/06 07/19/06 Surface Chemists of (G) Asphalt additive (G) Fatty acid salt
Florida, Inc. of alkyldiamine
P-06-0449 04/24/06 07/22/06 Werner G. Smith, Inc. (G) metal working (S) Hexanedioic acid,
fluid mixed esters with 4-
methyl-2-propyl-1-
hexanol,
pentaerythritol and
2-propyl-1-heptanol
P-06-0450 04/24/06 07/22/06 Colonial Chemical, (S) Wetting agent for (S) Poly(oxy-1,2-
Inc. low foam spray metal ethanediyl), .alpha.-
cleaning (2-methyl-2-
propenyl)-.omega.-
hydroxy-, c12-15-
alkyl ethers
P-06-0451 04/24/06 07/22/06 Colonial Chemical, (S) Wetting agent for (S) Poly(oxy-1,2-
Inc. low foam spray metal ethanediyl), .alpha.-
cleaning (2-methyl-2-
propenyl)-.omega.-
hydroxy-, C10 16-
alkyl ethers
P-06-0452 04/24/06 07/22/06 Colonial Chemical, (S) Wetting agent for (S) Poly(oxy-1,2-
Inc. low foam spray metal ethanediyl), .alpha.-
cleaning (2-methyl-2-
propenyl)-.omega.-
hydroxy-, C12 16-
alkyl ethers
P-06-0453 04/25/06 07/23/06 Eastman Chemical (S) Adhesion promoter (G) Modified
Company for paints polylolefin
P-06-0454 04/25/06 07/23/06 CBI (G) Polymer (G) Modified phenol
dispersant admixture resin
P-06-0455 04/25/06 07/19/06 CBI (G) Polymer (G) Modified phenol
dispersant admixture resin
P-06-0456 04/26/06 07/24/06 CBI (G) Polyester (G) Polyester,
polymer with
trimethylol propane
and
tetrahydrophthalic
anhydride
P-06-0457 04/27/06 07/25/06 The Sherwin-Williams (G) Floor coating (G) Silico titanate
Co. ester
P-06-0458 04/27/06 07/25/06 E.I. Du Pont De (G) Polymer modifier (G) Magnesium salt of
Nemours and Company fatty acid
Inc.
P-06-0459 04/27/06 07/25/06 E.I. Du Pont De (G) Polymer modifier (G) Calcium salt of
Nemours and Company fatty acid
Inc.
P-06-0460 04/27/06 07/25/06 E.I. Du Pont De (G) Polymer modifier (G) Zinc sakt of
Nemours and Company fatty acid
Inc.
[[Page 27721]]
P-06-0461 04/27/06 07/25/06 E.I.Du Pont De (G) Polymer modifier (G) Lithium salt of
Nemours and Company fatty acid
Inc.
P-06-0462 04/28/06 07/26/06 CIBA Specialty (S) Clarifer for (G) 2,2-alkyl-
Chemicals polymers, primarily N,N',N''-
Corporation polypropylene aryltriyltris
propanamide
P-06-0463 04/28/06 07/26/06 Chemitall Foote (G) Electrolyte (S) Borate(1-), bis
Corporation [ethanedioato (2-)-
.kappa. 01, .kappa.
02] -lithium, (t-4)-
P-06-0464 04/28/06 07/26/06 Bedoukian Research, (S) Chemical (S) 3-decanol
Inc. intermediate
--------------------------------------------------------------------------------------------------------------------------------------------------------
In Table II of this unit, EPA provides the following information
(to the extent that such information is not claimed as CBI) on the
Notices of Commencement to manufacture received:
II. 25 Notices of Commencement From: 04/10/06 to 04/28/06
----------------------------------------------------------------------------------------------------------------
Commencement Notice
Case No. Received Date End Date Chemical
----------------------------------------------------------------------------------------------------------------
P-00-0887 04/10/06 04/04/05 (G) Polyester polyether
isocyanate polymer
P-05-0290 04/12/06 03/28/06 (G) Alkanediocic acid,
polymer with 1,3,5-
tris(substituted alkyl)-
1,3,5-triazine-
2,4,6(1h,3h,5h)-trione,
alkanoate (ester) 3-
substituted-2-
(substituted alkyl)-2-
alkanoate (ester)
P-05-0704 04/10/06 03/15/06 (G) Silylated urethane
resin
P-05-0705 04/10/06 03/15/06 (G) Silylated urethane
resin
P-06-0011 04/10/06 03/30/06 (G) Isocyanate functional
polyester polyether
urethane polymer
P-06-0027 04/11/06 03/01/06 (G) Polyester acrylate
oligomer
P-06-0028 04/11/06 01/19/06 (G) Polyester acrylate
oligomer
P-03-0751 04/17/06 03/30/06 (G) Polyacrylic resin
P-05-0402 04/18/06 04/11/06 (G) Arene,alkenyl-,
homopolymer,
hydroxyaromatic
carboxylic acid-
terminated, metal
complexes
P-05-0403 04/18/06 04/11/06 (G) Alkylaldehyde, polymer
with alkylarenol,
hydroxyaromatic
carboxylic acid-
terminated, metal
complexes
P-05-0446 04/25/06 03/29/06 (G) 1-propanaminium, 2,3-
dihydroxy-N,N-dimethyl-n-
[3-[(fatty
acid)amino]propyl-
,chloride
P-05-0733 04/27/06 04/24/06 (G) Urethane modified
epoxy resin
P-05-0766 04/26/06 03/30/06 (S) Poly[oxy(methyl-1,2-
ethanediyl)], .alpha.-
methyl-.omega.-(4-
nonylphenoxy)-,branched
P-05-0819 04/14/06 03/29/06 (G) Oxazolidine functional
acrylic polyol
P-05-0829 04/17/06 03/12/06 (S) 1-naphthalenesulfonic
acid, 2-[[2-hydroxy-3-
[(phenylamino)carbonyl]-1-
naphthalenyl]azo]-,
calcium salt (2:1)
P-05-0831 04/17/06 03/12/06 (S) Benzenesulfonic acid,
2-chloro-5-[[2-hydroxy-3-
[(phenylamino)carbonyl]-1-
naphthalenyl]azo]-,
calcium salt (2:1)
P-06-0006 04/26/06 04/13/06 (S) Oils, apple
P-06-0014 04/27/06 04/25/06 (G) Aminocarboxylic acid
chelating agent
P-06-0095 04/20/06 03/24/06 (G) Organo barium salt
P-06-0107 04/25/06 03/25/06 (G) Aminophenyl
substituted pyrazolone
P-06-0156 04/28/06 04/14/06 (S) Silane,
ethenyltrimethoxy-,
reaction products with 1-
butene-ethylene-propene
polymer
P-94-0651 04/17/06 04/07/06 (G) Polyester isocyanate
prepolymer
P-95-1489 04/21/06 03/29/06 (G) Polyester polyether
isocyanate prepolymer
P-98-0066 04/19/06 03/27/06 (S) 1-dodecanol,
manufurer. of, distn.
lights
P-98-0067 04/19/06 04/02/06 (S) 1-tetradecanol,
manufurer. of distn.
lights
----------------------------------------------------------------------------------------------------------------
List of Subjects
Environmental protection, Chemicals, Premanufacturer notices.
Dated: May 5, 2006.
LaRona M. Washington,
Acting Director, Information Management Division, Office of Pollution
Prevention and Toxics.
[FR Doc. E6-7217 Filed 5-11-06; 8:45 am]
BILLING CODE 6560-50-S
