Foreign-Trade Zone 185 -- Culpepper County, Virginia, Expansion of Facilities -- Subzone 185C, Merck & Company, Inc., (Pharmaceutical Products), Elkton, Virginia, 74290-74291 [05-24085]

Download as PDF 74290 Federal Register / Vol. 70, No. 240 / Thursday, December 15, 2005 / Notices DEPARTMENT OF COMMERCE Foreign–Trade Zones Board (Docket 61–2005) Foreign–Trade Zone 35 -- Philadelphia, Pennsylvania, Expansion of Facilities -- Subzone 35B, Merck & Company, Inc., (Pharmaceutical Products), West Point, Pennsylvania An application has been submitted to the Foreign–Trade Zones Board (the Board) by the Philadelphia Regional Airport Authority, grantee of FTZ 35, requesting to expand the subzone (Subzone 35B) at the Merck & Company, Inc. (Merck) facility in West Point, Pennsylvania. The application was submitted pursuant to the Foreign– Trade Zones Act, as amended (19 U.S.C. 81a–81u), and the regulations of the Board. It was formally filed on December 7, 2005. Subzone 35B was approved by the Board on November 14, 1994 at a single site (106 bldgs./6,317,280 sq. ft. on 405 acres) located at Sunneytown Pike and Broad Street, in West Point (Montgomery County), Pennsylvania, with authority granted for the manufacture of finished pharmaceuticals (Board Order 708, 59 FR 60604, 11/25/94), and expanded on 4/5/01 (Board Order 1153, 66 FR 19918, 4/18/01). Merck is now proposing to expand production capacity under FTZ procedures by adding 168 buildings totaling 1,227,192 sq. ft. but reducing total acreage by 8 acres. The expanded subzone would then include 274 buildings consisting of 7,544,472 sq. ft. on 397 acres. In accordance with the Board’s regulations, a member of the FTZ staff has been designated examiner to investigate the application and report to the Board. Public comment on the application is invited from interested parties. Submissions (original and 3 copies) shall be addressed to the Board’s Executive Secretary at one of the following addresses: 1. Submissions via Express/Package Delivery Services: Foreign–Trade Zones Board, U.S. Department of Commerce, Franklin Court Building–Suite 4100W, 1099 14th Street, NW, Washington, DC 20005; or, 2. Submissions via the U.S. Postal Service: Foreign–Trade Zones Board, U.S. Department of Commerce, FCB–Suite 4100W, 1401 Constitution Avenue, NW, Washington, DC 20230. The closing period for their receipt is February 13, 2006. Rebuttal comments VerDate Aug<31>2005 17:24 Dec 14, 2005 Jkt 208001 in response to material submitted during the foregoing period may be submitted during the subsequent 15-day period (to February 28, 2006). A copy of the application and accompanying exhibits will be available during this time for public inspection at address Number 1 listed above, and at the U.S. Department of Commerce, Export Assistance Center, The Curtis Center, Suite 580 West, 601 Walnut Street, Independence Square West, Philadelphia, PA 19106. Dated: December 8, 2005. Dennis Puccinelli, Executive Secretary. [FR Doc. 05–24086 Filed 12–14–05; 8:45 am] BILLING CODE 3510–DS–S DEPARTMENT OF COMMERCE Foreign–Trade Zones Board (Dockets 62–2005 and 63–2005) Foreign–Trade Zone 61-- San Juan, Puerto Rico, Expansion of Facilities-Subzone 61D, 61E, Merck Sharpe & Dohme Quimica De Puerto Rico, Inc., (Pharmaceutical Products), Arecibo and Barceloneta, Puerto Rico Applications have been submitted to the Foreign–Trade Zones Board (the Board) by the Puerto Rico Trade & Export Company, grantee of FTZ 61, requesting to expand the subzones at the Merck, Sharp & Dohme Quimica de Puerto Rico, Inc. (MSDQ), facilities in Arecibo (Subzone 61D, Docket 62– 2005), and Barceloneta (Subzone 61E, Docket 63–2005), Puerto Rico. The applications were submitted pursuant to the Foreign–Trade Zones Act, as amended (19 U.S.C. 81a–81u), and the regulations of the Board. They were formally filed on December 7, 2005. Subzone 61D was approved by the Board on May 12, 1995 at a single site (3 bldgs./286,000 sq. ft. on 38 acres) located at Road PR–2, Km. 60, in the municipality of Arecibo, Puerto Rico, with authority granted for the manufacture of finished pharmaceuticals (Board Order 741, 60 FR 27272, 5/23/95), and expanded on 11/9/00 (Board Order 1125, 65 FR 69731, 11/20/00). MSDQ is now proposing to expand production capacity under FTZ procedures by adding acreage and 1 building and expanding the existing buildings. The expanded subzone would then include 4 buildings consisting of 334,778 sq. ft. on 53 acres. Subzone 61E was approved by the board on May 12, 1995 at a single site (92 bldgs./504,756 sq. ft. on 221 acres) PO 00000 Frm 00002 Fmt 4703 Sfmt 4703 located at Road PR–2, Km. 57, in the municipality of Barceloneta, Puerto Rico, with authority granted for the manufacture of pharmaceutical bulk chemicals and intermediates used in Merck’s human and animal health products and finished animal health and agricultural chemical products for its AgVet Division (agricultural/ veterinary) (Board Order 742, 60 FR 27272, 5/23/95), and expanded on 11/9/ 00 (Board Order 1126, 65 FR 69731, 11/ 20/00). MSDQ is now proposing to expand production capacity under FTZ procedures by adding acreage and 6 buildings and expanding an existing building. The expanded subzone would then include 98 buildings consisting of 598,415 sq. ft. on 257 acres. In accordance with the Board’s regulations, a member of the FTZ staff has been designated examiner to investigate the applications and report to the Board. Public comment on the applications is invited from interested parties. Submissions (original and 3 copies) shall be addressed to the Board’s Executive Secretary at one of the following addresses: 1. Submissions via Express/Package Delivery Services: Foreign–Trade Zones Board, U.S. Department of Commerce, Franklin Court Building–Suite 4100W, 1099 14th Street, NW, Washington, DC 20005; or, 2. Submissions via the U.S. Postal Service: Foreign–Trade Zones Board, U.S. Department of Commerce, FCB–Suite 4100W, 1401 Constitution Avenue, NW, Washington, DC 20230. The closing period for their receipt is February 13, 2006. Rebuttal comments in response to material submitted during the foregoing period may be submitted during the subsequent 15-day period (to February 28, 2006). A copy of the applications and accompanying exhibits will be available during this time for public inspection at address Number 1 listed above, and at the U.S. Department of Commerce, Export Assistance Center, 525 F.D. Roosevelt Ave., Suite 905, San Juan, PR 00918. Dated: December 8, 2005. Dennis Puccinelli, Executive Secretary. [FR Doc. 05–24084 Filed 12–14–05; 8:45 am] BILLING CODE 3510–DS–S E:\FR\FM\15DEN1.SGM 15DEN1 Federal Register / Vol. 70, No. 240 / Thursday, December 15, 2005 / Notices DEPARTMENT OF COMMERCE Foreign–Trade Zones Board (Docket 60–2005) Foreign–Trade Zone 185 -- Culpepper County, Virginia, Expansion of Facilities -- Subzone 185C, Merck & Company, Inc., (Pharmaceutical Products), Elkton, Virginia An application has been submitted to the Foreign–Trade Zones Board (the Board) by the Culpepper County Chamber of Commerce, grantee of FTZ 185, requesting to expand the subzone (Subzone 185C) at the Merck & Company Inc. (Merck), facility in Elkton, Virginia. The application was submitted pursuant to the Foreign– Trade Zones Act, as amended (19 U.S.C. 81a–81u), and the regulations of the Board. It was formally filed on December 7, 2005. Subzone 185C was approved by the Board on November 14, 1994 at a single site (82 bldgs./624,221 sq. ft. on 1,333 acres) located on Route 340S, in Elkton (Rockingham County), Virginia, with authority granted for the manufacture of finished pharmaceuticals (Board Order 710, 59 FR 60603, 11/25/94), and expanded on 04/05/01 (Board Order 1156, 66 FR 19919, 04/18/01). Merck is now proposing to expand production capacity under FTZ procedures by adding acreage and 2 additional buildings totaling 137,047 sq. ft. The expanded subzone would then include 99 buildings consisting of 1,903,718 sq. ft. on 1,433 acres. In accordance with the Board’s regulations, a member of the FTZ staff has been designated examiner to investigate the application and report to the Board. Public comment on the application is invited from interested parties. Submissions (original and 3 copies) shall be addressed to the Board’s Executive Secretary at one of the following addresses: 1. Submissions via Express/Package Delivery Services: Foreign–Trade Zones Board, U.S. Department of Commerce, Franklin Court Building–Suite 4100W, 1099 14th Street, NW, Washington, DC 20005; or, 2. Submissions via the U.S. Postal Service: Foreign–Trade Zones Board, U.S. Department of Commerce, FCB–Suite 4100W, 1401 Constitution Avenue, NW, Washington, DC 20230. The closing period for their receipt is February 13, 2006. Rebuttal comments in response to material submitted during the foregoing period may be VerDate Aug<31>2005 17:24 Dec 14, 2005 Jkt 208001 submitted during the subsequent 15-day period (to February 28, 2006). A copy of the application and accompanying exhibits will be available during this time for public inspection at address Number 1 listed above, and at the Culpepper County Chamber of Commerce, 133 West Davis Drive, Culpepper, Virginia 22701. Dated: December 8, 2005. Dennis Puccinelli, Executive Secretary. [FR Doc. 05–24085 Filed 12–14–05; 8:45 am] BILLING CODE 3510–DS–S DEPARTMENT OF COMMERCE International Trade Administration [A–570–899] Notice of Amended Preliminary Determination of Sales at Less Than Fair Value: Certain Artist Canvas from the People’s Republic of China Import Administration, International Trade Administration, Department of Commerce. EFFECTIVE DATE: December 15, 2005. FOR FURTHER INFORMATION CONTACT: Jon Freed or Michael Holton, AD/CVD Operations, Office 8, Import Administration, International Trade Administration, U.S. Department of Commerce, 14th Street and Constitution Avenue, NW., Washington, DC, 20230; telephone: (202) 482–3818 or 482–1324, respectively. SUMMARY: On November 7, 2005, the Department of Commerce (‘‘the Department’’) published its affirmative preliminary determination in this proceeding. See Notice of Preliminary Determination of Sales at Less Than Fair Value: Certain Artist Canvas from the People’s Republic of China, 70 FR 67412 (November 7, 2005) (‘‘Preliminary Determination’’). While the Department did not receive any allegations of ministerial errors in the Preliminary Determination, the Department inadvertently stated an inaccurate manufacturer/producer name in the provided combination rate, and inadvertently failed to include one combination rate. In the Preliminary Determination, the Department stated it would calculate combination rates for certain respondents that are eligible for a separate rate in this investigation. Thus, we granted Jiangsu Animal By–products Import & Export Group Corp. (‘‘Jiangsu By–products’’) (i.e., a separate rate applicant) a separate rate and calculated a combination rate for Jiangsu By– products. However, in our Weighted– AGENCY: PO 00000 Frm 00003 Fmt 4703 Sfmt 4703 74291 Average Dumping Margins section, the Department inadvertently stated an inaccurate manufacturer/producer name in the provided combination rate for Jiangsu By–products, and inadvertently failed to include one combination rate for Jiangsu By–products. Therefore, we are correcting the Weighted–Average Dumping Margins section to include the additional combination rate and to correct the manufacturer/producer name. SUPPLEMENTARY INFORMATION: Scope The products covered by this investigation are artist canvases regardless of dimension and/or size, whether assembled or unassembled, that have been primed/coated, whether or not made from cotton, whether or not archival, whether bleached or unbleached, and whether or not containing an ink receptive top coat. Priming/coating includes the application of a solution, designed to promote the adherence of artist materials, such as paint or ink, to the fabric. Artist canvases (i.e., pre– stretched canvases, canvas panels, canvas pads, canvas rolls (including bulk rolls that have been primed), printable canvases, floor cloths, and placemats) are tightly woven prepared painting and/or printing surfaces. Artist canvas and stretcher strips (whether or not made of wood and whether or not assembled) included within a kit or set are covered by this proceeding. Artist canvases subject to this investigation are currently classifiable under subheadings 5901.90.20.00 and 5901.90.40.00 of the Harmonized Tariff Schedule of the United States (‘‘HTSUS’’). Specifically excluded from the scope of this investigation are tracing cloths, ‘‘paint–by-number’’ or ‘‘paint–it-yourself’’ artist canvases with a copyrighted preprinted outline, pattern, or design, whether or not included in a painting set or kit.1 Also excluded are stretcher strips, whether or not made from wood, so long as they are not incorporated into artist canvases or sold as part of an artist canvas kit or set. While HTSUS subheadings are provided for convenience and customs purposes, our written description of the scope of this proceeding is dispositive. Amended Preliminary Determination As a result of our correction to the Preliminary Determination, we have determined that the following 1 Artist canvases with a non-copyrighted preprinted outline, pattern, or design are included in the scope, whether or not included in a painting set or kit. E:\FR\FM\15DEN1.SGM 15DEN1

Agencies

[Federal Register Volume 70, Number 240 (Thursday, December 15, 2005)]
[Notices]
[Pages 74290-74291]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 05-24085]



[[Page 74291]]

-----------------------------------------------------------------------

DEPARTMENT OF COMMERCE

Foreign-Trade Zones Board

(Docket 60-2005)


Foreign-Trade Zone 185 -- Culpepper County, Virginia, Expansion 
of Facilities -- Subzone 185C, Merck & Company, Inc., (Pharmaceutical 
Products), Elkton, Virginia

    An application has been submitted to the Foreign-Trade Zones Board 
(the Board) by the Culpepper County Chamber of Commerce, grantee of FTZ 
185, requesting to expand the subzone (Subzone 185C) at the Merck & 
Company Inc. (Merck), facility in Elkton, Virginia. The application was 
submitted pursuant to the Foreign-Trade Zones Act, as amended (19 
U.S.C. 81a-81u), and the regulations of the Board. It was formally 
filed on December 7, 2005.
    Subzone 185C was approved by the Board on November 14, 1994 at a 
single site (82 bldgs./624,221 sq. ft. on 1,333 acres) located on Route 
340S, in Elkton (Rockingham County), Virginia, with authority granted 
for the manufacture of finished pharmaceuticals (Board Order 710, 59 FR 
60603, 11/25/94), and expanded on 04/05/01 (Board Order 1156, 66 FR 
19919, 04/18/01). Merck is now proposing to expand production capacity 
under FTZ procedures by adding acreage and 2 additional buildings 
totaling 137,047 sq. ft. The expanded subzone would then include 99 
buildings consisting of 1,903,718 sq. ft. on 1,433 acres.
    In accordance with the Board's regulations, a member of the FTZ 
staff has been designated examiner to investigate the application and 
report to the Board.
    Public comment on the application is invited from interested 
parties. Submissions (original and 3 copies) shall be addressed to the 
Board's Executive Secretary at one of the following addresses:
    1. Submissions via Express/Package Delivery Services: Foreign-Trade 
Zones Board, U.S. Department of Commerce, Franklin Court Building-Suite 
4100W, 1099 14th Street, NW, Washington, DC 20005; or,
    2. Submissions via the U.S. Postal Service: Foreign-Trade Zones 
Board, U.S. Department of Commerce, FCB-Suite 4100W, 1401 Constitution 
Avenue, NW, Washington, DC 20230.
    The closing period for their receipt is February 13, 2006. Rebuttal 
comments in response to material submitted during the foregoing period 
may be submitted during the subsequent 15-day period (to February 28, 
2006).
    A copy of the application and accompanying exhibits will be 
available during this time for public inspection at address Number 1 
listed above, and at the Culpepper County Chamber of Commerce, 133 West 
Davis Drive, Culpepper, Virginia 22701.

    Dated: December 8, 2005.
Dennis Puccinelli,
Executive Secretary.
[FR Doc. 05-24085 Filed 12-14-05; 8:45 am]
BILLING CODE 3510-DS-S