International Code for the Construction & Equipment of Ships Carrying Dangerous Chemicals in Bulk-December 2005 Deadline for Manufacturers of Affected Products, 70861-70862 [05-23234]

Download as PDF Federal Register / Vol. 70, No. 225 / Wednesday, November 23, 2005 / Notices required to contact Mrs. Giselle Hersh, Division of Workplace Programs, 1 Choke Cherry Road, Room 2–1042, Rockville, MD 20857, 240–276–2605 (telephone) or by e-mail to Giselle.Hersh@samhsa.hhs.gov. Substantive program information and a roster of Board members may be obtained by accessing the SAMHSA workplace Web site (https:// workplace.samhsa.gov) or communicating with the contact whose name and telephone number are listed below. The transcript for the open session will be available on the SAMHSA workplace Web site as soon as possible after the meeting. Committee Name: Substance Abuse and Mental Health Services Administration Drug Testing Advisory Board. Meeting Date: December 13–14, 2005. Place: SAMHSA Building, Sugarloaf Conference Room, 1 Choke Cherry Road, Rockville, Maryland 20850. Type: Open: December 13, 2005; 8:30 a.m.–10:30 a.m. Closed: December 13, 2005; 10:30 a.m.–4:30 p.m. Closed: December 14, 2005; 8:30 a.m.– Noon. Contact: Donna M. Bush, Ph.D., Executive Secretary, 1 Choke Cherry Road, Room 2–1033, Rockville, Maryland 20857, 240–276–2600 (telephone) and 240–276–2610 (fax), email: Donna.Bush@samhsa.hhs.gov. Dated: November 17, 2005. Robert E. Stephenson, Acting Committee Management Officer, Substance Abuse and Mental Health Services Administration. [FR Doc. 05–23155 Filed 11–22–05; 8:45 am] BILLING CODE 4162–20–P DEPARTMENT OF HOMELAND SECURITY Coast Guard [USCG–2005–23024] International Code for the Construction & Equipment of Ships Carrying Dangerous Chemicals in Bulk— December 2005 Deadline for Manufacturers of Affected Products Coast Guard, DHS. Notice. AGENCY: ACTION: SUMMARY: The Coast Guard notifies manufacturers that there is a December 31, 2005 deadline to supply missing safety or pollution data for the revised International Code for the Construction & Equipment of Ships Carrying Dangerous Chemicals in Bulk, which VerDate Aug<31>2005 17:33 Nov 22, 2005 Jkt 208001 will affect the bulk shipment of certain products on most international voyages. DATES: The International Maritime Organization should receive missing data no later than December 31, 2005. ADDRESSES: Missing data can be delivered to the following address: GESAMP/EHS, International Maritime Organization, 4 Albert Embankment, London SE1 7SR, United Kingdom. You may submit comments identified by Coast Guard docket number USCG– 2005–23024 to the Docket Management Facility at the U.S. Department of Transportation. To avoid duplication, please use only one of the following methods: (1) Web Site: https://dms.dot.gov. (2) Mail: Docket Management Facility, U.S. Department of Transportation, 400 Seventh Street, SW., Washington, DC 20590–0001. (3) Fax: 202–493–2251. (4) Delivery: Room PL–401 on the Plaza level of the Nassif Building, 400 Seventh Street, SW., Washington, DC, between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. The telephone number is 202–366– 9329. FOR FURTHER INFORMATION CONTACT: If you have questions on this notice, call Mr. Tom Felleisen, Hazardous Materials Standards Division (G–MSO–3), Coast Guard, telephone 202–267–0086. If you have questions on viewing or submitting material to the docket, call Renee V. Wright, Program Manager, Docket Operations, telephone 202–493–0402. SUPPLEMENTARY INFORMATION: Request for Comments All comments received will be posted, without change, to https://dms.dot.gov and will include any personal information you have provided. We have an agreement with the Department of Transportation (DOT) to use the Docket Management Facility. Please see DOT’s ‘‘Privacy Act’’ paragraph below. Submitting comments: If you submit a comment, please include your name and address, identify the docket number for this notice (USCG–2005–23024) and give the reason for each comment. You may submit your comments by electronic means, mail, fax, or delivery to the Docket Management Facility at the address under ADDRESSES; but please submit your comments by only one means. If you submit them by mail or delivery, submit them in an unbound format, no larger than 81⁄2 by 11 inches, suitable for copying and electronic filing. If you submit them by mail and would like to know that they reached the Facility, please enclose a stamped, self-addressed postcard or envelope. We PO 00000 Frm 00080 Fmt 4703 Sfmt 4703 70861 will consider all comments received during the comment period. Viewing comments and documents: To view comments, go to https:// dms.dot.gov at any time, click on ‘‘Simple Search,’’ enter the last five digits of the docket number for this rulemaking, and click on ‘‘Search.’’ You may also visit the Docket Management Facility in room PL–401 on the Plaza level of the Nassif Building, 400 Seventh Street, SW., Washington, DC, between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. Privacy Act: Anyone can search the electronic form of all comments received into any of our dockets by the name of the individual submitting the comment (or signing the comment, if submitted on behalf of an association, business, labor union, etc.). You may review the Department of Transportation’s Privacy Act Statement in the Federal Register published on April 11, 2000 (65 FR 19477), or you may visit https://dms.dot.gov. Background and Purpose The International Maritime Organization’s (IMO) Maritime Safety Committee adopted the revised International Code for the Construction & Equipment of Ships Carrying Dangerous Chemicals in Bulk (IBC Code) last year. Over 120 products were omitted from either Chapter 17 or 18 of the IBC Code due to missing safety and or pollution data. The 41st session of the Joint Group of Experts on the Scientific Aspects of Marine Environmental Protection working group on the Evaluation of the Hazards of Harmful Substances Carried by Ships and the most recent session of the working group on the Evaluation of Safety and Pollution Hazards updated this list. IMO will exclude these products from the revised IBC Code unless it receives the missing data by December 31, 2005. If these products are excluded, shippers will be unable to carry them in bulk after January 1, 2007 on most international voyages. Therefore, the manufacturers of these products should supply the missing safety and or pollution data to the IMO GESAMP/EHS Secretariat (see ADDRESSES) by December 31, 2005. This notice of an IMO action does not mean that the Coast Guard will necessarily be implementing the IMO action on all international shipments. Implementation of IMO actions would be the subject of a future rulemaking under a distinct docket. The affected products are: 1. Acetochlor 2. Alkaryl polyethers (C9–C20) 3. Alkenyl (C11+) amide E:\FR\FM\23NON1.SGM 23NON1 70862 Federal Register / Vol. 70, No. 225 / Wednesday, November 23, 2005 / Notices 4. Alkyl(C8+)amine, Alkenyl (C12+) acid ester mixture 5. Aluminium chloride (30% or less)/ Hydrochloric acid (20% or less) solution 6. 2-(2-Aminoethoxy) ethanol 7. 2-Amino-2-hydroxymethyl-1,3propanediol solution (40% or less) 8. Ammonium bisulphite solution (70% or less) 9. Ammonium thiocyanate (25% or less)/Ammonium thiosulphate (20% or less) solution 10. Benzyl chloride 11. N,N-bis(2-hydroxyethyl) oleamide 12. Brake fluid base mix: Poly(2– 8)alkylene (C2–C3) glycols/ Polyalkylene (C2–C10) 13. glycols monoalkyl (C1–C4) ethers and their borate esters 14. Butene oligomer 15. Butyl stearate 16. Calcium alkyl (C9) phenol sulphide/ Polyolefin phosphorosulphide mixture 17. Calcium long-chain alkaryl sulphonate (C11–C50) 18. Calcium long-chain alkyl phenolic amine (C8–C40) 19. Calcium nitrate/Magnesium nitrate/ Potassium chloride solution 20. Calcium nitrate solutions (50% or less) 21. Camphor oil 22. Caramel solutions 23. Carbolic oil 24. Cashew nut shell oil (untreated) 25. Chlorinated paraffins (C14-C17) (with 50% chlorine or more, and less than 1% C13 or shorter chains) 26. Coal tar 27. Coal tar naphtha solvent 28. Coal tar pitch (molten) 29. Cobalt naphthenate in solvent naphtha 30. Coconut oil fatty acid methyl ester 31. Creosote (coal tar) 32. Creosote (wood) 33. Cresylic acid, sodium salt solution 34. Decyl acetate 35. 1,6-Dichlorohexane 36. 2,4-Dichlorophenoxyacetic acid, triisopropanolamine salt solution 37. 1,3-Dichloropropane 38. Diethylene glycol diethyl ether 39. Diethylene glycol phthalate 40. Diglycidyl ether of bisphenol 41. 1,4-Dihydro-9,10dihydroxyanthracene, disodium salt solution 42. Diisononyl adipate 43. Dinonyl phthalate 44. Diphenylamine, reaction product with 2,2,4-Trimethylpentene 45. Diphenylmethane diisocyanate 46. Ditridecyl adipate 47. Ditridecyl phthalate 48. Dodecenylsuccinic acid, dipotassium salt solution VerDate Aug<31>2005 17:33 Nov 22, 2005 Jkt 208001 49. Dodecylamine/Tetradecylamine mixture 50. Dodecyl diphenyl ether disulphonate solution 51. Ethyl amyl ketone 52. N-Ethylbutylamine 53. Ethyl butyrate 54. Ethylene glycol methyl butyl ether 55. Ethylene-Vinyl acetate copolymer (emulsion) 56. o-Ethylphenol 57. Ethyl propionate 58. Ferric hydroxyethylethylenediaminetriacetic acid, trisodium salt solution 59. Fish solubles (water-based fish meal extract) 60. Fluorosilicic acid (20–30%) in water solution 61. Fumaric adduct of rosin, water dispersion 62. Glycerine (83%), Dioxanedimethanol (17%) mixture 63. Glycerol polyalkoxylate 64. Icosa (oxypropane-2,3-diyl)s 65. Isopropylamine (70% or less) 66. Latex, ammonia (1% or less), inhibited 67. Latex: Carboxylated styreneButadiene copolymer; StyreneButadiene rubber 68. Ligninsulphonic acid, sodium salt solution 69. Long-chain alkaryl sulphonic acid (C16–C60) 70. Long-chain polyetheramine in alkyl (C2–C4) benzenes 71. Long-chain polyetheramine in aromatic solvent 72. Magnesium long-chain alkaryl sulphonate (C11–C50) 73. Methyl heptyl ketone 74. 3-Methyl-3-methoxybutyl acetate 75. Naphthenic Acids 76. Nitroethane, 1-Nitropropane (each 15% or more) mixture 77. o- or p-Nitrotoluenes 78. Nonyl acetate 79. Octyl decyl adipate 80. Oleylamine 81. Palm kernel acid oil 82. Palm oil fatty acid methyl ester 83. Pentaethylenehexamine 84. Phosphate esters, alkyl (C12–C14) amine 85. Poly(2–8)alkylene glycol monoalkyl(C1–C6) ether 86. Poly(2–8)alkylene glycol monoalkyl (C1–C6) ether acetate 87. Polyalkylene oxide polyol 88. Polybutene 89. Polyether (molecular weight 2000+) 90. Polyethylene polyamines 91. Polyglycerin, sodium salt solution (containing less than 3% sodium hydroxide) 92. Polyglycerol 93. Polyolefin amide alkeneamine/ molybdenum oxysulphide mixture PO 00000 Frm 00081 Fmt 4703 Sfmt 4703 94. Polyolefin amide alkeneamine polyol 95. Polyolefin aminoester salts (mw 2000+) 96. Poly(5+)propylene 97. Poly(tetramethylene ether) glycol (mw 600–3000) 98. Potassium chloride solution (10% or more) 99. Potassium salt of polyolefin acid 100. n-Propyl chloride 101. Propylene-Butylene copolymer 102. Propylene dimer 103. Pyrolysis gasoline 104. Rosin soap (disproportionated) solution 105. Sodium alkyl (C14–C17) sulphonates (60–65% solution) 106. Sodium aluminate solution 107. Sodium petroleum sulphonate 108. Sodium tartrates/Sodium succinates solution 109. Sulpho hydrocarbon long chain (C18+) alkylamine mixture 110. Sulphurized polyolefinamide alkene (C28–C250) amine 111. Tall oil (crude and distilled) 112. Tall oil fatty acid (resin acids less than 20%) 113. Tall oil fatty acid, barium salt 114. Tall oil soap (disproportionated) solution 115. Tallow fatty acid 116. Trimethylhexamethylenediamine (2,2,4- and 2,4,4-isomers) 117. Trimethylhexamethylene diisocyanate (2,2,4-and 2,4,4-isomers) 118. Trimethylolpropane polyethoxylate 119. Trimethyl phosphite 120. Urea/Ammonium mono- and dihydrogen phosphate/Potassium chloride solution 121. Urea formaldehyde resin solution 122. White spirit, low (15–20%) aromatic Dated: November 17, 2005. Howard L. Hime, Acting Director of Standards, Marine, Safety, Security, and Environmental Protection, U.S. Coast Guard. [FR Doc. 05–23234 Filed 11–22–05; 8:45 am] BILLING CODE 4910–15–P DEPARTMENT OF HOMELAND SECURITY Coast Guard [USCG–2005–22837] Nationwide Automatic Identification System (NAIS); Preparation of Programmatic Environmental Impact Statement U.S. Coast Guard (USCG or Coast Guard), Department of Homeland Security (DHS). ACTION: Notice of intent; notice of public meeting; request for comments. AGENCY: E:\FR\FM\23NON1.SGM 23NON1

Agencies

[Federal Register Volume 70, Number 225 (Wednesday, November 23, 2005)]
[Notices]
[Pages 70861-70862]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 05-23234]


=======================================================================
-----------------------------------------------------------------------

DEPARTMENT OF HOMELAND SECURITY

Coast Guard

[USCG-2005-23024]


International Code for the Construction & Equipment of Ships 
Carrying Dangerous Chemicals in Bulk--December 2005 Deadline for 
Manufacturers of Affected Products

AGENCY: Coast Guard, DHS.

ACTION: Notice.

-----------------------------------------------------------------------

SUMMARY: The Coast Guard notifies manufacturers that there is a 
December 31, 2005 deadline to supply missing safety or pollution data 
for the revised International Code for the Construction & Equipment of 
Ships Carrying Dangerous Chemicals in Bulk, which will affect the bulk 
shipment of certain products on most international voyages.

DATES: The International Maritime Organization should receive missing 
data no later than December 31, 2005.

ADDRESSES: Missing data can be delivered to the following address: 
GESAMP/EHS, International Maritime Organization, 4 Albert Embankment, 
London SE1 7SR, United Kingdom. You may submit comments identified by 
Coast Guard docket number USCG-2005-23024 to the Docket Management 
Facility at the U.S. Department of Transportation. To avoid 
duplication, please use only one of the following methods:
    (1) Web Site: https://dms.dot.gov.
    (2) Mail: Docket Management Facility, U.S. Department of 
Transportation, 400 Seventh Street, SW., Washington, DC 20590-0001.
    (3) Fax: 202-493-2251.
    (4) Delivery: Room PL-401 on the Plaza level of the Nassif 
Building, 400 Seventh Street, SW., Washington, DC, between 9 a.m. and 5 
p.m., Monday through Friday, except Federal holidays. The telephone 
number is 202-366-9329.

FOR FURTHER INFORMATION CONTACT: If you have questions on this notice, 
call Mr. Tom Felleisen, Hazardous Materials Standards Division (G-MSO-
3), Coast Guard, telephone 202-267-0086. If you have questions on 
viewing or submitting material to the docket, call Renee V. Wright, 
Program Manager, Docket Operations, telephone 202-493-0402.

SUPPLEMENTARY INFORMATION:

Request for Comments

    All comments received will be posted, without change, to https://
dms.dot.gov and will include any personal information you have 
provided. We have an agreement with the Department of Transportation 
(DOT) to use the Docket Management Facility. Please see DOT's ``Privacy 
Act'' paragraph below.
    Submitting comments: If you submit a comment, please include your 
name and address, identify the docket number for this notice (USCG-
2005-23024) and give the reason for each comment. You may submit your 
comments by electronic means, mail, fax, or delivery to the Docket 
Management Facility at the address under ADDRESSES; but please submit 
your comments by only one means. If you submit them by mail or 
delivery, submit them in an unbound format, no larger than 8\1/2\ by 11 
inches, suitable for copying and electronic filing. If you submit them 
by mail and would like to know that they reached the Facility, please 
enclose a stamped, self-addressed postcard or envelope. We will 
consider all comments received during the comment period.
    Viewing comments and documents: To view comments, go to https://
dms.dot.gov at any time, click on ``Simple Search,'' enter the last 
five digits of the docket number for this rulemaking, and click on 
``Search.'' You may also visit the Docket Management Facility in room 
PL-401 on the Plaza level of the Nassif Building, 400 Seventh Street, 
SW., Washington, DC, between 9 a.m. and 5 p.m., Monday through Friday, 
except Federal holidays.
    Privacy Act: Anyone can search the electronic form of all comments 
received into any of our dockets by the name of the individual 
submitting the comment (or signing the comment, if submitted on behalf 
of an association, business, labor union, etc.). You may review the 
Department of Transportation's Privacy Act Statement in the Federal 
Register published on April 11, 2000 (65 FR 19477), or you may visit 
https://dms.dot.gov.

Background and Purpose

    The International Maritime Organization's (IMO) Maritime Safety 
Committee adopted the revised International Code for the Construction & 
Equipment of Ships Carrying Dangerous Chemicals in Bulk (IBC Code) last 
year. Over 120 products were omitted from either Chapter 17 or 18 of 
the IBC Code due to missing safety and or pollution data. The 41st 
session of the Joint Group of Experts on the Scientific Aspects of 
Marine Environmental Protection working group on the Evaluation of the 
Hazards of Harmful Substances Carried by Ships and the most recent 
session of the working group on the Evaluation of Safety and Pollution 
Hazards updated this list. IMO will exclude these products from the 
revised IBC Code unless it receives the missing data by December 31, 
2005. If these products are excluded, shippers will be unable to carry 
them in bulk after January 1, 2007 on most international voyages. 
Therefore, the manufacturers of these products should supply the 
missing safety and or pollution data to the IMO GESAMP/EHS Secretariat 
(see ADDRESSES) by December 31, 2005.
    This notice of an IMO action does not mean that the Coast Guard 
will necessarily be implementing the IMO action on all international 
shipments. Implementation of IMO actions would be the subject of a 
future rulemaking under a distinct docket.
    The affected products are:

1. Acetochlor
2. Alkaryl polyethers (C9-C20)
3. Alkenyl (C11+) amide

[[Page 70862]]

4. Alkyl(C8+)amine, Alkenyl (C12+) acid ester mixture
5. Aluminium chloride (30% or less)/Hydrochloric acid (20% or less) 
solution
6. 2-(2-Aminoethoxy) ethanol
7. 2-Amino-2-hydroxymethyl-1,3-propanediol solution (40% or less)
8. Ammonium bisulphite solution (70% or less)
9. Ammonium thiocyanate (25% or less)/Ammonium thiosulphate (20% or 
less) solution
10. Benzyl chloride
11. N,N-bis(2-hydroxyethyl) oleamide
12. Brake fluid base mix: Poly(2-8)alkylene (C2-C3) glycols/
Polyalkylene (C2-C10)
13. glycols monoalkyl (C1-C4) ethers and their borate esters
14. Butene oligomer
15. Butyl stearate
16. Calcium alkyl (C9) phenol sulphide/Polyolefin phosphorosulphide 
mixture
17. Calcium long-chain alkaryl sulphonate (C11-C50)
18. Calcium long-chain alkyl phenolic amine (C8-C40)
19. Calcium nitrate/Magnesium nitrate/Potassium chloride solution
20. Calcium nitrate solutions (50% or less)
21. Camphor oil
22. Caramel solutions
23. Carbolic oil
24. Cashew nut shell oil (untreated)
25. Chlorinated paraffins (C14-C17) (with 50% chlorine or more, and 
less than 1% C13 or shorter chains)
26. Coal tar
27. Coal tar naphtha solvent
28. Coal tar pitch (molten)
29. Cobalt naphthenate in solvent naphtha
30. Coconut oil fatty acid methyl ester
31. Creosote (coal tar)
32. Creosote (wood)
33. Cresylic acid, sodium salt solution
34. Decyl acetate
35. 1,6-Dichlorohexane
36. 2,4-Dichlorophenoxyacetic acid, triisopropanolamine salt solution
37. 1,3-Dichloropropane
38. Diethylene glycol diethyl ether
39. Diethylene glycol phthalate
40. Diglycidyl ether of bisphenol
41. 1,4-Dihydro-9,10-dihydroxyanthracene, disodium salt solution
42. Diisononyl adipate
43. Dinonyl phthalate
44. Diphenylamine, reaction product with 2,2,4-Trimethylpentene
45. Diphenylmethane diisocyanate
46. Ditridecyl adipate
47. Ditridecyl phthalate
48. Dodecenylsuccinic acid, dipotassium salt solution
49. Dodecylamine/Tetradecylamine mixture
50. Dodecyl diphenyl ether disulphonate solution
51. Ethyl amyl ketone
52. N-Ethylbutylamine
53. Ethyl butyrate
54. Ethylene glycol methyl butyl ether
55. Ethylene-Vinyl acetate copolymer (emulsion)
56. o-Ethylphenol
57. Ethyl propionate
58. Ferric hydroxyethylethylenediaminetriacetic acid, trisodium salt 
solution
59. Fish solubles (water-based fish meal extract)
60. Fluorosilicic acid (20-30%) in water solution
61. Fumaric adduct of rosin, water dispersion
62. Glycerine (83%), Dioxanedimethanol (17%) mixture
63. Glycerol polyalkoxylate
64. Icosa (oxypropane-2,3-diyl)s
65. Isopropylamine (70% or less)
66. Latex, ammonia (1% or less), inhibited
67. Latex: Carboxylated styrene-Butadiene copolymer; Styrene-Butadiene 
rubber
68. Ligninsulphonic acid, sodium salt solution
69. Long-chain alkaryl sulphonic acid (C16-C60)
70. Long-chain polyetheramine in alkyl (C2-C4) benzenes
71. Long-chain polyetheramine in aromatic solvent
72. Magnesium long-chain alkaryl sulphonate (C11-C50)
73. Methyl heptyl ketone
74. 3-Methyl-3-methoxybutyl acetate
75. Naphthenic Acids
76. Nitroethane, 1-Nitropropane (each 15% or more) mixture
77. o- or p-Nitrotoluenes
78. Nonyl acetate
79. Octyl decyl adipate
80. Oleylamine
81. Palm kernel acid oil
82. Palm oil fatty acid methyl ester
83. Pentaethylenehexamine
84. Phosphate esters, alkyl (C12-C14) amine
85. Poly(2-8)alkylene glycol monoalkyl(C1-C6) ether
86. Poly(2-8)alkylene glycol monoalkyl (C1-C6) ether acetate
87. Polyalkylene oxide polyol
88. Polybutene
89. Polyether (molecular weight 2000+)
90. Polyethylene polyamines
91. Polyglycerin, sodium salt solution (containing less than 3% sodium 
hydroxide)
92. Polyglycerol
93. Polyolefin amide alkeneamine/molybdenum oxysulphide mixture
94. Polyolefin amide alkeneamine polyol
95. Polyolefin aminoester salts (mw 2000+)
96. Poly(5+)propylene
97. Poly(tetramethylene ether) glycol (mw 600-3000)
98. Potassium chloride solution (10% or more)
99. Potassium salt of polyolefin acid
100. n-Propyl chloride
101. Propylene-Butylene copolymer
102. Propylene dimer
103. Pyrolysis gasoline
104. Rosin soap (disproportionated) solution
105. Sodium alkyl (C14-C17) sulphonates (60-65% solution)
106. Sodium aluminate solution
107. Sodium petroleum sulphonate
108. Sodium tartrates/Sodium succinates solution
109. Sulpho hydrocarbon long chain (C18+) alkylamine mixture
110. Sulphurized polyolefinamide alkene (C28-C250) amine
111. Tall oil (crude and distilled)
112. Tall oil fatty acid (resin acids less than 20%)
113. Tall oil fatty acid, barium salt
114. Tall oil soap (disproportionated) solution
115. Tallow fatty acid
116. Trimethylhexamethylenediamine (2,2,4- and 2,4,4-isomers)
117. Trimethylhexamethylene diisocyanate (2,2,4-and 2,4,4-isomers)
118. Trimethylolpropane polyethoxylate
119. Trimethyl phosphite
120. Urea/Ammonium mono- and dihydrogen phosphate/Potassium chloride 
solution
121. Urea formaldehyde resin solution
122. White spirit, low (15-20%) aromatic

    Dated: November 17, 2005.
Howard L. Hime,
Acting Director of Standards, Marine, Safety, Security, and 
Environmental Protection, U.S. Coast Guard.
[FR Doc. 05-23234 Filed 11-22-05; 8:45 am]
BILLING CODE 4910-15-P

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.