Special Conditions: Boeing Model 767-200, -300, and -300F Series Airplanes; High-Intensity Radiated Fields (HIRF), 59632-59633 [05-20458]

Download as PDF 59632 Federal Register / Vol. 70, No. 197 / Thursday, October 13, 2005 / Rules and Regulations DEPARTMENT OF TRANSPORTATION Federal Aviation Administration 14 CFR Part 25 [Docket No. NM332; Special Conditions No. 25–303–SC] Special Conditions: Boeing Model 767– 200, –300, and –300F Series Airplanes; High-Intensity Radiated Fields (HIRF) Federal Aviation Administration (FAA), DOT. ACTION: Final special conditions; request for comments. AGENCY: SUMMARY: These special conditions are issued for Boeing Model 767–200, –300, and –300F series airplanes modified by ABX Air, Inc. These modified airplanes will have a novel or unusual design feature when compared to the state of technology envisioned in the airworthiness standards for transport category airplanes. The modification incorporates the installation of an Innovative Solutions and Support Flat Panel Display System that performs critical functions. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for the protection of these systems from the effects of high-intensity radiated fields (HIRF). These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards. DATES: The effective date of these special conditions is October 4, 2005. Comments must be received on or before November 14, 2005. ADDRESSES: Comments on these special conditions may be mailed in duplicate to: Federal Aviation Administration, Transport Airplane Directorate, Attention: Rules Docket (ANM–113), Docket No. NM332, 1601 Lind Avenue, SW., Renton, Washington 98055–4056; or delivered in duplicate to the Transport Airplane Directorate at the above address. All comments must be marked: Docket No. NM332. FOR FURTHER INFORMATION CONTACT: Greg Dunn, FAA, Airplane and Flight Crew Interface Branch, ANM–111, Transport Airplane Directorate, Aircraft Certification Service, 1601 Lind Avenue, SW., Renton, Washington 98055–4056; telephone (425) 227–2799; facsimile (425) 227–1320. SUPPLEMENTARY INFORMATION: Comments Invited The FAA has determined that notice and opportunity for prior public VerDate Aug<31>2005 14:41 Oct 12, 2005 Jkt 208001 comment is impracticable because these procedures would significantly delay certification of the airplane and thus delivery of the affected aircraft. In addition, the substance of these special conditions has been subject to the public comment process in several prior instances with no substantive comments received. The FAA therefore finds that good cause exists for making these special conditions effective upon issuance; however, the FAA invites interested persons to participate in this rulemaking by submitting written comments, data, or views. The most helpful comments reference a specific portion of the special conditions, explain the reason for any recommended change, and include supporting data. We ask that you send us two copies of written comments. We will file in the docket all comments we receive, as well as a report summarizing each substantive public contact with FAA personnel concerning these special conditions. The docket is available for public inspection before and after the comment closing date. If you wish to review the docket in person, go to the address in the ADDRESSES section of this preamble between 7:30 a.m. and 4 p.m., Monday through Friday, except Federal holidays. We will consider all comments we receive on or before the closing date for comments. We will consider comments filed late if it is possible to do so without incurring expense or delay. We may change these special conditions based on the comments we receive. If you want the FAA to acknowledge receipt of your comments on these special conditions, include with your comments a pre-addressed, stamped postcard on which the docket number appears. We will stamp the date on the postcard and mail it back to you. Background On April 22, 2005, ABX Air, Inc., 145 Hunter Drive, Wilmington, OH 45177, applied for a supplemental type certificate (STC) to modify Boeing Model 767–200, –300 and –300F series airplanes. These models are currently approved under Type Certificate No. A1NM. The Boeing Model 767–200, –300 and –300F series airplanes are large transport category airplanes powered by either two Pratt & Whitney or two General Electric engines. The Boeing Model 767–200 and –300 series airplanes carry a maximum of 351 passengers. The modification incorporates the installation of the Innovative Solutions and Support (IS&S) Flat Panel Display System (FPDS). The avionics/electronics and electrical systems installed in this PO 00000 Frm 00012 Fmt 4700 Sfmt 4700 airplane have the potential to be vulnerable to high-intensity radiated fields (HIRF) external to the airplane. Type Certification Basis Under the provisions of 14 CFR 21.101, ABX Air, Inc. must show that the Boeing Model 767–200, –300 and –300F series airplanes, as changed, continue to meet the applicable provisions of the regulations incorporated by reference in Type Certificate No. A1NM, or the applicable regulations in effect on the date of application for the change. The regulations incorporated by reference in the type certificate are commonly referred to as the ‘‘original type certification basis.’’ The certification basis for Boeing Model 767–200, –300, and –300F series airplanes includes applicable sections of 14 CFR part 25, effective July 30, 1982, as amended by Amendments 25–1 through 25–45, except for portions of Amendment 25.38. In addition, the certification basis includes certain special conditions, exemptions, equivalent levels of safety, or later amended sections of the applicable part 25 that are not relevant to these special conditions. If the Administrator finds that the applicable airworthiness regulations (i.e., part 25, as amended) do not contain adequate or appropriate safety standards for Boeing Model 767–200, –300 and –300F series airplanes because of a novel or unusual design feature, special conditions are prescribed under the provisions of § 21.16. In addition to the applicable airworthiness regulations and special conditions, the Boeing Model 767–200, –300 and –300F series airplanes must comply with the fuel vent and exhaust emission requirements of 14 CFR part 34 and the noise certification requirements of 14 CFR part 36. Special conditions, as defined in 14 CFR 11.19, are issued in accordance with § 11.38 and become part of the type certification basis in accordance with § 21.101. Special conditions are initially applicable to the model for which they are issued. Should ABX Air, Inc. apply at a later date for a STC to modify any other model included on Type Certificate No. A1NM to incorporate the same or similar novel or unusual design feature, these special conditions would also apply to the other model under the provisions of § 21.101. Novel or Unusual Design Features As noted earlier, the Boeing Model 767–200, –300 and –300F series airplanes modified by ABX Air, Inc. will incorporate a FPDS manufactured by E:\FR\FM\13OCR1.SGM 13OCR1 Federal Register / Vol. 70, No. 197 / Thursday, October 13, 2005 / Rules and Regulations IS&S that will perform critical functions. This system may be vulnerable to high-intensity radiated fields (HIRF) external to the airplane. The current airworthiness standards of part 25 do not contain adequate or appropriate safety standards for the protection of this equipment from the adverse effects of HIRF. Accordingly, this system is considered to be a novel or unusual design feature. b. Demonstration of this level of protection is established through system tests and analysis. 2. A threat external to the airframe of the field strengths identified in the table below for the frequency ranges indicated. Both peak and average field strength components from the table are to be demonstrated. Frequency Discussion There is no specific regulation that addresses protection requirements for electrical and electronic systems from HIRF. Increased power levels from ground-based radio transmitters and the growing use of sensitive avionics/ electronics and electrical systems to command and control airplanes have made it necessary to provide adequate protection. To ensure that a level of safety is achieved equivalent to that intended by the regulations incorporated by reference, special conditions are needed for the Boeing Model 767–200, –300 and –300F series airplanes modified by ABX Air, Inc. These special conditions require that new avionics/electronics and electrical systems that perform critical functions be designed and installed to preclude component damage and interruption of function due to both the direct and indirect effects of HIRF. High-Intensity Radiated Fields (HIRF) With the trend toward increased power levels from ground-based transmitters, and the advent of space and satellite communications coupled with electronic command and control of the airplane, the immunity of critical avionics/electronics and electrical systems to HIRF must be established. It is not possible to precisely define the HIRF to which the airplane will be exposed in service. There is also uncertainty concerning the effectiveness of airframe shielding for HIRF. Furthermore, coupling of electromagnetic energy to cockpitinstalled equipment through the cockpit window apertures is undefined. Based on surveys and analysis of existing HIRF emitters, an adequate level of protection exists when compliance with the HIRF protection special condition is shown with either paragraph 1 OR 2 below: 1. A minimum threat of 100 volts rms (root-mean-square) per meter electric field strength from 10 KHz to 18 GHz. a. The threat must be applied to the system elements and their associated wiring harnesses without the benefit of airframe shielding. VerDate Aug<31>2005 14:41 Oct 12, 2005 Jkt 208001 Field strength (volts per meter) Peak 10 kHz–100 kHz ....... 100 kHz–500 kHz ..... 500 kHz–2 MHz ........ 2 MHz–30 MHz ......... 30 MHz–70 MHz ....... 70 MHz–100 MHz ..... 100 MHz–200 MHz ... 200 MHz–400 MHz ... 400 MHz–700 MHz ... 700 MHz–1 GHz ....... 1 GHz–2 GHz ........... 2 GHz–4 GHz ........... 4 GHz–6 GHz ........... 6 GHz–8 GHz ........... 8 GHz–12 GHz ......... 12 GHz–18 GHz ....... 18 GHz–40 GHz ....... 50 50 50 100 50 50 100 100 700 700 2000 3000 3000 1000 3000 2000 600 Average 50 50 50 100 50 50 100 100 50 100 200 200 200 200 300 200 200 The field strengths are expressed in terms of peak of the root-mean-square (rms) over the complete modulation period. The threat levels identified above are the result of an FAA review of existing studies on the subject of HIRF, in light of the ongoing work of the Electromagnetic Effects Harmonization Working Group of the Aviation Rulemaking Advisory Committee. Applicability As discussed above, these special conditions are applicable to Boeing Model 767–200, –300 and –300F series airplanes modified by ABX Air, Inc. Should ABX Air, Inc. apply at a later date for a STC to modify any other model included on Type Certificate No. A1NM to incorporate the same or similar novel or unusual design feature, these special conditions would apply to that model as well under the provisions of § 21.101. Conclusion This action affects only certain novel or unusual design features on Boeing Model 767–200, –300 and –300F series airplanes modified by ABX Air, Inc. It is not a rule of general applicability and affects only the applicant who applied to the FAA for approval of these features on the airplane. The substance of these special conditions has been subjected to the notice and comment procedure in several prior instances and has been derived without substantive change PO 00000 Frm 00013 Fmt 4700 Sfmt 4700 59633 from those previously issued. Because a delay would significantly affect the certification of the airplane, which is imminent, the FAA has determined that prior public notice and comment are unnecessary and impracticable, and good cause exists for adopting these special conditions upon issuance. The FAA is requesting comments to allow interested persons to submit views that may not have been submitted in response to the prior opportunities for comment described above. List of Subjects in 14 CFR Part 25 Aircraft, Aviation safety, Reporting and recordkeeping requirements. The authority citation for these special conditions is as follows: Authority: 49 U.S.C. 106(g), 40113, 44701, 44702, 44704. The Special Conditions Accordingly, pursuant to the authority delegated to me by the Administrator, the following special conditions are issued as part of the supplemental type certification basis for the Boeing Model 767–200, –300 and –300F series airplanes modified by ABX Air, Inc. 1. Protection from Unwanted Effects of HIRF. Each electrical and electronic system that performs critical functions must be designed and installed to ensure that the operation and operational capability of these systems to perform critical functions are not adversely affected when the airplane is exposed to high-intensity radiated fields. 2. For the purpose of these special conditions, the following definition applies: Critical Functions: Functions whose failure would contribute to or cause a failure condition that would prevent the continued safe flight and landing of the airplane. I Issued in Renton, Washington, on October 4, 2005. Ali Bahrami, Manager, Transport Airplane Directorate, Aircraft Certification Service. [FR Doc. 05–20458 Filed 10–12–05; 8:45 am] BILLING CODE 4910–13–P E:\FR\FM\13OCR1.SGM 13OCR1

Agencies

[Federal Register Volume 70, Number 197 (Thursday, October 13, 2005)]
[Rules and Regulations]
[Pages 59632-59633]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 05-20458]



[[Page 59632]]

-----------------------------------------------------------------------

DEPARTMENT OF TRANSPORTATION

Federal Aviation Administration

14 CFR Part 25

[Docket No. NM332; Special Conditions No. 25-303-SC]


Special Conditions: Boeing Model 767-200, -300, and -300F Series 
Airplanes; High-Intensity Radiated Fields (HIRF)

AGENCY: Federal Aviation Administration (FAA), DOT.

ACTION: Final special conditions; request for comments.

-----------------------------------------------------------------------

SUMMARY: These special conditions are issued for Boeing Model 767-200, 
-300, and -300F series airplanes modified by ABX Air, Inc. These 
modified airplanes will have a novel or unusual design feature when 
compared to the state of technology envisioned in the airworthiness 
standards for transport category airplanes. The modification 
incorporates the installation of an Innovative Solutions and Support 
Flat Panel Display System that performs critical functions. The 
applicable airworthiness regulations do not contain adequate or 
appropriate safety standards for the protection of these systems from 
the effects of high-intensity radiated fields (HIRF). These special 
conditions contain the additional safety standards that the 
Administrator considers necessary to establish a level of safety 
equivalent to that established by the existing airworthiness standards.

DATES: The effective date of these special conditions is October 4, 
2005. Comments must be received on or before November 14, 2005.

ADDRESSES: Comments on these special conditions may be mailed in 
duplicate to: Federal Aviation Administration, Transport Airplane 
Directorate, Attention: Rules Docket (ANM-113), Docket No. NM332, 1601 
Lind Avenue, SW., Renton, Washington 98055-4056; or delivered in 
duplicate to the Transport Airplane Directorate at the above address. 
All comments must be marked: Docket No. NM332.

FOR FURTHER INFORMATION CONTACT: Greg Dunn, FAA, Airplane and Flight 
Crew Interface Branch, ANM-111, Transport Airplane Directorate, 
Aircraft Certification Service, 1601 Lind Avenue, SW., Renton, 
Washington 98055-4056; telephone (425) 227-2799; facsimile (425) 227-
1320.

SUPPLEMENTARY INFORMATION:

Comments Invited

    The FAA has determined that notice and opportunity for prior public 
comment is impracticable because these procedures would significantly 
delay certification of the airplane and thus delivery of the affected 
aircraft. In addition, the substance of these special conditions has 
been subject to the public comment process in several prior instances 
with no substantive comments received. The FAA therefore finds that 
good cause exists for making these special conditions effective upon 
issuance; however, the FAA invites interested persons to participate in 
this rulemaking by submitting written comments, data, or views. The 
most helpful comments reference a specific portion of the special 
conditions, explain the reason for any recommended change, and include 
supporting data. We ask that you send us two copies of written 
comments.
    We will file in the docket all comments we receive, as well as a 
report summarizing each substantive public contact with FAA personnel 
concerning these special conditions. The docket is available for public 
inspection before and after the comment closing date. If you wish to 
review the docket in person, go to the address in the ADDRESSES section 
of this preamble between 7:30 a.m. and 4 p.m., Monday through Friday, 
except Federal holidays.
    We will consider all comments we receive on or before the closing 
date for comments. We will consider comments filed late if it is 
possible to do so without incurring expense or delay. We may change 
these special conditions based on the comments we receive.
    If you want the FAA to acknowledge receipt of your comments on 
these special conditions, include with your comments a pre-addressed, 
stamped postcard on which the docket number appears. We will stamp the 
date on the postcard and mail it back to you.

Background

    On April 22, 2005, ABX Air, Inc., 145 Hunter Drive, Wilmington, OH 
45177, applied for a supplemental type certificate (STC) to modify 
Boeing Model 767-200, -300 and -300F series airplanes. These models are 
currently approved under Type Certificate No. A1NM. The Boeing Model 
767-200, -300 and -300F series airplanes are large transport category 
airplanes powered by either two Pratt & Whitney or two General Electric 
engines. The Boeing Model 767-200 and -300 series airplanes carry a 
maximum of 351 passengers. The modification incorporates the 
installation of the Innovative Solutions and Support (IS&S) Flat Panel 
Display System (FPDS). The avionics/electronics and electrical systems 
installed in this airplane have the potential to be vulnerable to high-
intensity radiated fields (HIRF) external to the airplane.

Type Certification Basis

    Under the provisions of 14 CFR 21.101, ABX Air, Inc. must show that 
the Boeing Model 767-200, -300 and -300F series airplanes, as changed, 
continue to meet the applicable provisions of the regulations 
incorporated by reference in Type Certificate No. A1NM, or the 
applicable regulations in effect on the date of application for the 
change. The regulations incorporated by reference in the type 
certificate are commonly referred to as the ``original type 
certification basis.'' The certification basis for Boeing Model 767-
200, -300, and -300F series airplanes includes applicable sections of 
14 CFR part 25, effective July 30, 1982, as amended by Amendments 25-1 
through 25-45, except for portions of Amendment 25.38. In addition, the 
certification basis includes certain special conditions, exemptions, 
equivalent levels of safety, or later amended sections of the 
applicable part 25 that are not relevant to these special conditions.
    If the Administrator finds that the applicable airworthiness 
regulations (i.e., part 25, as amended) do not contain adequate or 
appropriate safety standards for Boeing Model 767-200, -300 and -300F 
series airplanes because of a novel or unusual design feature, special 
conditions are prescribed under the provisions of Sec.  21.16.
    In addition to the applicable airworthiness regulations and special 
conditions, the Boeing Model 767-200, -300 and -300F series airplanes 
must comply with the fuel vent and exhaust emission requirements of 14 
CFR part 34 and the noise certification requirements of 14 CFR part 36.
    Special conditions, as defined in 14 CFR 11.19, are issued in 
accordance with Sec.  11.38 and become part of the type certification 
basis in accordance with Sec.  21.101.
    Special conditions are initially applicable to the model for which 
they are issued. Should ABX Air, Inc. apply at a later date for a STC 
to modify any other model included on Type Certificate No. A1NM to 
incorporate the same or similar novel or unusual design feature, these 
special conditions would also apply to the other model under the 
provisions of Sec.  21.101.

Novel or Unusual Design Features

    As noted earlier, the Boeing Model 767-200, -300 and -300F series 
airplanes modified by ABX Air, Inc. will incorporate a FPDS 
manufactured by

[[Page 59633]]

IS&S that will perform critical functions. This system may be 
vulnerable to high-intensity radiated fields (HIRF) external to the 
airplane. The current airworthiness standards of part 25 do not contain 
adequate or appropriate safety standards for the protection of this 
equipment from the adverse effects of HIRF. Accordingly, this system is 
considered to be a novel or unusual design feature.

Discussion

    There is no specific regulation that addresses protection 
requirements for electrical and electronic systems from HIRF. Increased 
power levels from ground-based radio transmitters and the growing use 
of sensitive avionics/electronics and electrical systems to command and 
control airplanes have made it necessary to provide adequate 
protection.
    To ensure that a level of safety is achieved equivalent to that 
intended by the regulations incorporated by reference, special 
conditions are needed for the Boeing Model 767-200, -300 and -300F 
series airplanes modified by ABX Air, Inc. These special conditions 
require that new avionics/electronics and electrical systems that 
perform critical functions be designed and installed to preclude 
component damage and interruption of function due to both the direct 
and indirect effects of HIRF.

High-Intensity Radiated Fields (HIRF)

    With the trend toward increased power levels from ground-based 
transmitters, and the advent of space and satellite communications 
coupled with electronic command and control of the airplane, the 
immunity of critical avionics/electronics and electrical systems to 
HIRF must be established.
    It is not possible to precisely define the HIRF to which the 
airplane will be exposed in service. There is also uncertainty 
concerning the effectiveness of airframe shielding for HIRF. 
Furthermore, coupling of electromagnetic energy to cockpit-installed 
equipment through the cockpit window apertures is undefined. Based on 
surveys and analysis of existing HIRF emitters, an adequate level of 
protection exists when compliance with the HIRF protection special 
condition is shown with either paragraph 1 OR 2 below:
    1. A minimum threat of 100 volts rms (root-mean-square) per meter 
electric field strength from 10 KHz to 18 GHz.
    a. The threat must be applied to the system elements and their 
associated wiring harnesses without the benefit of airframe shielding.
    b. Demonstration of this level of protection is established through 
system tests and analysis.
    2. A threat external to the airframe of the field strengths 
identified in the table below for the frequency ranges indicated. Both 
peak and average field strength components from the table are to be 
demonstrated.

------------------------------------------------------------------------
                                                       Field strength
                                                      (volts per meter)
                     Frequency                     ---------------------
                                                       Peak     Average
------------------------------------------------------------------------
10 kHz-100 kHz....................................         50         50
100 kHz-500 kHz...................................         50         50
500 kHz-2 MHz.....................................         50         50
2 MHz-30 MHz......................................        100        100
30 MHz-70 MHz.....................................         50         50
70 MHz-100 MHz....................................         50         50
100 MHz-200 MHz...................................        100        100
200 MHz-400 MHz...................................        100        100
400 MHz-700 MHz...................................        700         50
700 MHz-1 GHz.....................................        700        100
1 GHz-2 GHz.......................................       2000        200
2 GHz-4 GHz.......................................       3000        200
4 GHz-6 GHz.......................................       3000        200
6 GHz-8 GHz.......................................       1000        200
8 GHz-12 GHz......................................       3000        300
12 GHz-18 GHz.....................................       2000        200
18 GHz-40 GHz.....................................        600       200
------------------------------------------------------------------------
 The field strengths are expressed in terms of peak of the root-mean-
  square (rms) over the complete modulation period.

    The threat levels identified above are the result of an FAA review 
of existing studies on the subject of HIRF, in light of the ongoing 
work of the Electromagnetic Effects Harmonization Working Group of the 
Aviation Rulemaking Advisory Committee.

Applicability

    As discussed above, these special conditions are applicable to 
Boeing Model 767-200, -300 and -300F series airplanes modified by ABX 
Air, Inc. Should ABX Air, Inc. apply at a later date for a STC to 
modify any other model included on Type Certificate No. A1NM to 
incorporate the same or similar novel or unusual design feature, these 
special conditions would apply to that model as well under the 
provisions of Sec.  21.101.

Conclusion

    This action affects only certain novel or unusual design features 
on Boeing Model 767-200, -300 and -300F series airplanes modified by 
ABX Air, Inc. It is not a rule of general applicability and affects 
only the applicant who applied to the FAA for approval of these 
features on the airplane.
    The substance of these special conditions has been subjected to the 
notice and comment procedure in several prior instances and has been 
derived without substantive change from those previously issued. 
Because a delay would significantly affect the certification of the 
airplane, which is imminent, the FAA has determined that prior public 
notice and comment are unnecessary and impracticable, and good cause 
exists for adopting these special conditions upon issuance. The FAA is 
requesting comments to allow interested persons to submit views that 
may not have been submitted in response to the prior opportunities for 
comment described above.

List of Subjects in 14 CFR Part 25

    Aircraft, Aviation safety, Reporting and recordkeeping 
requirements.

    The authority citation for these special conditions is as follows:

    Authority: 49 U.S.C. 106(g), 40113, 44701, 44702, 44704.

The Special Conditions

0
Accordingly, pursuant to the authority delegated to me by the 
Administrator, the following special conditions are issued as part of 
the supplemental type certification basis for the Boeing Model 767-200, 
-300 and -300F series airplanes modified by ABX Air, Inc.
    1. Protection from Unwanted Effects of HIRF. Each electrical and 
electronic system that performs critical functions must be designed and 
installed to ensure that the operation and operational capability of 
these systems to perform critical functions are not adversely affected 
when the airplane is exposed to high-intensity radiated fields.
    2. For the purpose of these special conditions, the following 
definition applies:
    Critical Functions: Functions whose failure would contribute to or 
cause a failure condition that would prevent the continued safe flight 
and landing of the airplane.

    Issued in Renton, Washington, on October 4, 2005.
Ali Bahrami,
Manager, Transport Airplane Directorate, Aircraft Certification 
Service.
[FR Doc. 05-20458 Filed 10-12-05; 8:45 am]
BILLING CODE 4910-13-P
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.