Proposed Advisory Circular 25.1357-1X, “Circuit Protective Devices”, 58565 [05-19414]

Download as PDF Federal Register / Vol. 70, No. 193 / Thursday, October 6, 2005 / Notices Comments Invited Interested persons are invited to comment on the proposed AC by submitting such written data, views, or arguments as they may desire. Commenters should identify AC 25.1353–1 and submit comments, in duplicate, to the address specified above. All communications received on or before the closing date for comments will be considered by the FAA before issuing the final AC. The proposed AC can be found and downloaded from the Internet at https://www.airweb.faa.gov/ rgl under ‘‘Draft Advisory Circulars.’’ A paper copy of the proposed AC may be obtained by contacting the person named above under the caption FOR FURTHER INFORMATION CONTACT. Discussion This proposed AC provides guidance for demonstrating compliance with the transport category airplane certification requirements of § 25.1353 Electrical equipment and installations. The guidance provided in this proposed AC is directed to airplane manufacturers, modifiers, foreign regulatory authorities, FAA transport airplane type certification engineers, and designees. It is one means, but not the only means, of complying with the part 25 revisions proposed in Notice No. 05–08, entitled ‘‘Enhanced Airworthiness Program for Airplane Systems/Fuel Tank Safety (EAPAS/FTS),’’ published in this same edition of the Federal Register. Issuance of AC 25.1353–1 is contingent on final adoption of the proposed revisions to part 25. Issued in Washington, DC, on September 22, 2005. John J. Hickey, Director, Aircraft Certification Service. [FR Doc. 05–19413 Filed 10–5–05; 8:45 am] BILLING CODE 4910–13–P DEPARTMENT OF TRANSPORTATION Federal Aviation Administration Proposed Advisory Circular 25.1357– 1X, ‘‘Circuit Protective Devices’’ Federal Aviation Administration (FAA), DOT. ACTION: Notice of availability and request for comments. AGENCY: SUMMARY: This notice announces the availability of and requests comments on a proposed advisory circular (AC) that sets forth acceptable methods of compliance with § 25.1357 concerning electrical wiring. This proposed AC complements revisions to the airworthiness standards that are being VerDate Aug<31>2005 16:45 Oct 05, 2005 Jkt 208001 proposed by a separate notice. This notice is necessary to give all interested persons an opportunity to present their views on the proposed AC. Comments must be received on or before December 5, 2005. DATES: Send all comments on the proposed AC to: Federal Aviation Administration, Attention: Stephen Slotte, ANM–111, Airplane & Flight Crew Interface, Federal Aviation Administration, 1601 Lind Avenue SW., Renton, WA 98055–4056; telephone (425) 227–2315; facsimile (425) 227– 1320, e-mail steve.slotte@faa.gov. Comments may be inspected at the above address between 7:30 a.m. and 4 p.m. weekdays, except Federal holidays. 58565 Issued in Washington, DC, on September 22, 2005. John J. Hickey, Director, Aircraft Certification Service. [FR Doc. 05–19414 Filed 10–5–05; 8:45 am] BILLING CODE 4910–13–P ADDRESSES: FOR FURTHER INFORMATION CONTACT: Annette Kovite, Transport Standards Staff, at the address above, telephone (425) 227–1262. SUPPLEMENTARY INFORMATION: Comments Invited Interested persons are invited to comment on the proposed AC by submitting such written data, views, or arguments as they may desire. Commenters should identify AC 25.1357–1X and submit comments, in duplicate, to the address specified above. All communications received on or before the closing date for comments will be considered by the FAA before issuing the final AC. The proposed AC can be found and downloaded from the Internet at https://www.airweb.faa.gov/ rgl under ‘‘Draft Advisory Circulars.’’ A paper copy of the proposed AC may be obtained by contacting the person named above under the caption FOR FURTHER INFORMATION CONTACT. Discussion This proposed AC provides guidance for demonstrating compliance with the transport category airplane certification requirements of § 25.1357 Circuit protective devices The guidance provided in this proposed AC is directed to airplane manufacturers, modifiers, foreign regulatory authorities, FAA transport airplane type certification engineers, and designees. It is one means, but not the only means, of complying with the part 25 revisions proposed in Notice No. 05–08, entitled ‘‘Enhanced Airworthiness Program for Airplane Systems/Fuel Tank Safety (EAPAS/FTS),’’ published in this same edition of the Federal Register. Issuance of AC 25.1357–1X is contingent on final adoption of the proposed revisions to part 25. PO 00000 Frm 00004 Fmt 4701 Sfmt 4703 DEPARTMENT OF TRANSPORTATION Federal Aviation Administration Proposed Advisory Circular 25.1360– 1X, ‘‘Protection Against Injury’’ Federal Aviation Administration (FAA), DOT. ACTION: Notice of availability and request for comments. AGENCY: SUMMARY: This notice announces the availability of and requests comments on a proposed advisory circular (AC) that sets forth acceptable methods of compliance with § 25.1360 concerning electrical wiring. This proposed AC complements revisions to the airworthiness standards that are being proposed by a separate notice. This notice is necessary to give all interested persons an opportunity to present their views on the proposed AC. DATES: Comments must be received on or before December 5, 2005. ADDRESSES: Send all comments on the proposed AC to: Federal Aviation Administration, Attention: Stephen Slotte, ANM–111, Airplane & Flight Crew Interface, Federal Aviation Administration, 1601 Lind Avenue SW., Renton, WA 98055–4056; telephone (425) 227–2315; facsimile (425) 227– 1320, e-mail steve.slotte@faa.gov. Comments may be inspected at the above address between 7:30 a.m. and 4 p.m. weekdays, except Federal holidays. FOR FURTHER INFORMATION CONTACT: Annette Kovite, Transport Standards Staff, at the address above, telephone (425) 227–1262. SUPPLEMENTARY INFORMATION: Comments Invited Interested persons are invited to comment on the proposed AC by submitting such written data, views, or arguments as they may desire. Commenters should identify AC 25.1360–1X and submit comments, in duplicate, to the address specified above. All communications received on or before the closing date for comments will be considered by the FAA before issuing the final AC. The proposed AC can be found and downloaded from the Internet at https://www.airweb.faa.gov/ rgl under ‘‘Draft Advisory Circulars.’’ A paper copy of the proposed AC may be obtained by contacting the person E:\FR\FM\06OCN2.SGM 06OCN2

Agencies

[Federal Register Volume 70, Number 193 (Thursday, October 6, 2005)]
[Notices]
[Page 58565]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 05-19414]


-----------------------------------------------------------------------

DEPARTMENT OF TRANSPORTATION

Federal Aviation Administration


Proposed Advisory Circular 25.1357-1X, ``Circuit Protective 
Devices''

AGENCY: Federal Aviation Administration (FAA), DOT.

ACTION: Notice of availability and request for comments.

-----------------------------------------------------------------------

SUMMARY: This notice announces the availability of and requests 
comments on a proposed advisory circular (AC) that sets forth 
acceptable methods of compliance with Sec.  25.1357 concerning 
electrical wiring. This proposed AC complements revisions to the 
airworthiness standards that are being proposed by a separate notice. 
This notice is necessary to give all interested persons an opportunity 
to present their views on the proposed AC.

DATES: Comments must be received on or before December 5, 2005.

ADDRESSES: Send all comments on the proposed AC to: Federal Aviation 
Administration, Attention: Stephen Slotte, ANM-111, Airplane & Flight 
Crew Interface, Federal Aviation Administration, 1601 Lind Avenue SW., 
Renton, WA 98055-4056; telephone (425) 227-2315; facsimile (425) 227-
1320, e-mail steve.slotte@faa.gov. Comments may be inspected at the 
above address between 7:30 a.m. and 4 p.m. weekdays, except Federal 
holidays.

FOR FURTHER INFORMATION CONTACT: Annette Kovite, Transport Standards 
Staff, at the address above, telephone (425) 227-1262.

SUPPLEMENTARY INFORMATION:

Comments Invited

    Interested persons are invited to comment on the proposed AC by 
submitting such written data, views, or arguments as they may desire. 
Commenters should identify AC 25.1357-1X and submit comments, in 
duplicate, to the address specified above. All communications received 
on or before the closing date for comments will be considered by the 
FAA before issuing the final AC. The proposed AC can be found and 
downloaded from the Internet at https://www.airweb.faa.gov/rgl under 
``Draft Advisory Circulars.'' A paper copy of the proposed AC may be 
obtained by contacting the person named above under the caption FOR 
FURTHER INFORMATION CONTACT.

Discussion

    This proposed AC provides guidance for demonstrating compliance 
with the transport category airplane certification requirements of 
Sec.  25.1357 Circuit protective devices The guidance provided in this 
proposed AC is directed to airplane manufacturers, modifiers, foreign 
regulatory authorities, FAA transport airplane type certification 
engineers, and designees. It is one means, but not the only means, of 
complying with the part 25 revisions proposed in Notice No. 05-08, 
entitled ``Enhanced Airworthiness Program for Airplane Systems/Fuel 
Tank Safety (EAPAS/FTS),'' published in this same edition of the 
Federal Register. Issuance of AC 25.1357-1X is contingent on final 
adoption of the proposed revisions to part 25.

    Issued in Washington, DC, on September 22, 2005.
John J. Hickey,
Director, Aircraft Certification Service.
[FR Doc. 05-19414 Filed 10-5-05; 8:45 am]
BILLING CODE 4910-13-P
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.