Final Regulatory Guide: Issuance, Availability, 56939 [05-19445]
Download as PDF
Federal Register / Vol. 70, No. 188 / Thursday, September 29, 2005 / Notices
For the U.S. Nuclear Regulatory
Commission,
Carl J. Paperiello,
Director, Office of Nuclear Regulatory
Research.
[FR Doc. 05–19444 Filed 9–28–05; 8:45 am]
BILLING CODE 7590–01–P
NUCLEAR REGULATORY
COMMISSION
Final Regulatory Guide: Issuance,
Availability
The U.S. Nuclear Regulatory
Commission (NRC) has issued a revision
to an existing guide in the agency’s
Regulatory Guide Series. This series has
been developed to describe and make
available to the public such information
as methods that are acceptable to the
NRC staff for implementing specific
parts of the NRC’s regulations,
techniques that the staff uses in
evaluating specific problems or
postulated accidents, and data that the
staff needs in its review of applications
for permits and licenses.
Revision 1 of Regulatory Guide 1.193,
‘‘ASME Code Cases Not Approved for
Use,’’ lists the Code Cases that the NRC
has determined are not acceptable for
generic use as specified in Section III,
‘‘Rules for Construction of Nuclear
Power Plant Components,’’ and Section
XI, ‘‘Rules for Inservice Inspection of
Nuclear Power Plant Components,’’ of
the Boiler and Pressure Vessel (BPV)
Code promulgated by the American
Society of Mechanical Engineers
(ASME). (In so doing, this guide
complements Revision 33 of Regulatory
Guide 1.84, ‘‘Design, Fabrication, and
Materials Code Case Acceptability,
ASME Section III,’’ and Revision 14 of
Regulatory Guide 1.147, ‘‘Inservice
Inspection Code Case Acceptability,
ASME Section XI, Division 1,’’ which
list the Code Cases that the NRC has
determined to be acceptable alternatives
to applicable provisions of Section III
and Section XI, respectively.)
Licensees may request NRC approval
to implement one or more of the Code
Cases listed in Revision 1 of Regulatory
Guide 1.193, as provided in 10 CFR
50.55a(a)(3), which permits the use of
alternatives to the Code requirements
referenced in 10 CFR 50.55a, provided
that the proposed alternatives result in
an acceptable level of quality and safety.
To do so, a licensee must submit a
plant-specific request that addresses the
NRC’s concern about the given Code
Case.
On August 3, 2004, the NRC staff
published a draft of this guide as Draft
Regulatory Guide DG–1126. Following
VerDate Aug<31>2005
13:52 Sep 28, 2005
Jkt 205001
the closure of the public comment
period on September 2, 2004, the staff
considered all stakeholder comments in
the course of preparing Revision 1 of
Regulatory Guide 1.193.
The NRC staff encourages and
welcomes comments and suggestions in
connection with improvements to
published regulatory guides, as well as
items for inclusion in regulatory guides
that are currently being developed. You
may submit comments by any of the
following methods.
Mail comments to: Rules and
Directives Branch, Office of
Administration, U.S. Nuclear Regulatory
Commission, Washington, DC 20555–
0001.
Hand-deliver comments to: Rules and
Directives Branch, Office of
Administration, U.S. Nuclear Regulatory
Commission, 11555 Rockville Pike,
Rockville, Maryland 20852, between
7:30 a.m. and 4:15 p.m. on Federal
workdays.
Fax comments to: Rules and
Directives Branch, Office of
Administration, U.S. Nuclear Regulatory
Commission at (301) 415–5144.
Requests for technical information
about Revision 1 of Regulatory Guide
1.193 may be directed to Wallace E.
Norris, at (301) 415–6796 or
WEN@nrc.gov.
Regulatory guides are available for
inspection or downloading through the
NRC’s public Web site in the Regulatory
Guides document collection of the
NRC’s Electronic Reading Room at
https://www.nrc.gov/reading-rm/doccollections/. Electronic copies of
Revision 1 of Regulatory Guide 1.193
are also available in the NRC’s
Agencywide Documents Access and
Management System (ADAMS) at https://
www.nrc.gov/reading-rm/adams.html,
under Accession #ML052140501. Note,
however, that the NRC has temporarily
suspended public access to ADAMS so
that the agency can complete security
reviews of publicly available documents
and remove potentially sensitive
information. Please check the NRC’s
Web site for updates concerning the
resumption of public access to ADAMS.
In addition, regulatory guides are
available for inspection at the NRC’s
Public Document Room (PDR), which is
located at 11555 Rockville Pike,
Rockville, Maryland; the PDR’s mailing
address is USNRC PDR, Washington, DC
20555–0001. The PDR can also be
reached by telephone at (301) 415–4737
or (800) 397–4205, by fax at (301) 415–
3548, and by e-mail to PDR@nrc.gov.
Requests for single copies of draft or
final guides (which may be reproduced)
or for placement on an automatic
distribution list for single copies of
PO 00000
Frm 00054
Fmt 4703
Sfmt 4703
56939
future draft guides in specific divisions
should be made in writing to the U.S.
Nuclear Regulatory Commission,
Washington, DC 20555–0001, Attention:
Reproduction and Distribution Services
Section; by e-mail to
DISTRIBUTION@nrc.gov; or by fax to
(301) 415–2289. Telephone requests
cannot be accommodated.
Regulatory guides are not
copyrighted, and Commission approval
is not required to reproduce them.
(5 U.S.C. 552(a))
Dated at Rockville, Maryland, this 15th day
of August, 2005.
For the U.S. Nuclear Regulatory
Commission.
Carl J. Paperiello,
Director, Office of Nuclear Regulatory
Research.
[FR Doc. 05–19445 Filed 9–28–05; 8:45 am]
BILLING CODE 7590–01–P
NUCLEAR REGULATORY
COMMISSION
Final Regulatory Guide: Issuance,
Availability
The U.S. Nuclear Regulatory
Commission (NRC) has issued a revision
to an existing guide in the agency’s
Regulatory Guide Series. This series has
been developed to describe and make
available to the public such information
as methods that are acceptable to the
NRC staff for implementing specific
parts of the NRC’s regulations,
techniques that the staff uses in
evaluating specific problems or
postulated accidents, and data that the
staff needs in its review of applications
for permits and licenses.
Revision 14 of Regulatory Guide
1.147, ‘‘Inservice Inspection Code Case
Acceptability, ASME Section XI,
Division 1,’’ lists the NRC-approved
Code Cases from Section XI, ‘‘Rules for
Inservice Inspection of Nuclear Power
Plant Components,’’ of the Boiler and
Pressure Vessel (BPV) Code
promulgated by the American Society of
Mechanical Engineers (ASME). In so
doing, this guide identifies the Code
Cases that nuclear power plant
applicants and licensees can use to
comply with the NRC’s requirements in
Title 10, Section 50.55a(g), of the Code
of Federal Regulations [10 CFR
50.55a(g)], ‘‘Inservice Inspection
Requirements.’’ Specifically, 10 CFR
50.55a(g) requires, in part, that Class 1,
2, 3, MC, and CC components and their
supports must meet the requirements of
ASME Section XI (or equivalent quality
standards). The ASME publishes a new
edition of the BPV Code (which
includes Section XI) every 3 years, new
E:\FR\FM\29SEN1.SGM
29SEN1
Agencies
[Federal Register Volume 70, Number 188 (Thursday, September 29, 2005)]
[Notices]
[Page 56939]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 05-19445]
-----------------------------------------------------------------------
NUCLEAR REGULATORY COMMISSION
Final Regulatory Guide: Issuance, Availability
The U.S. Nuclear Regulatory Commission (NRC) has issued a revision
to an existing guide in the agency's Regulatory Guide Series. This
series has been developed to describe and make available to the public
such information as methods that are acceptable to the NRC staff for
implementing specific parts of the NRC's regulations, techniques that
the staff uses in evaluating specific problems or postulated accidents,
and data that the staff needs in its review of applications for permits
and licenses.
Revision 1 of Regulatory Guide 1.193, ``ASME Code Cases Not
Approved for Use,'' lists the Code Cases that the NRC has determined
are not acceptable for generic use as specified in Section III, ``Rules
for Construction of Nuclear Power Plant Components,'' and Section XI,
``Rules for Inservice Inspection of Nuclear Power Plant Components,''
of the Boiler and Pressure Vessel (BPV) Code promulgated by the
American Society of Mechanical Engineers (ASME). (In so doing, this
guide complements Revision 33 of Regulatory Guide 1.84, ``Design,
Fabrication, and Materials Code Case Acceptability, ASME Section III,''
and Revision 14 of Regulatory Guide 1.147, ``Inservice Inspection Code
Case Acceptability, ASME Section XI, Division 1,'' which list the Code
Cases that the NRC has determined to be acceptable alternatives to
applicable provisions of Section III and Section XI, respectively.)
Licensees may request NRC approval to implement one or more of the
Code Cases listed in Revision 1 of Regulatory Guide 1.193, as provided
in 10 CFR 50.55a(a)(3), which permits the use of alternatives to the
Code requirements referenced in 10 CFR 50.55a, provided that the
proposed alternatives result in an acceptable level of quality and
safety. To do so, a licensee must submit a plant-specific request that
addresses the NRC's concern about the given Code Case.
On August 3, 2004, the NRC staff published a draft of this guide as
Draft Regulatory Guide DG-1126. Following the closure of the public
comment period on September 2, 2004, the staff considered all
stakeholder comments in the course of preparing Revision 1 of
Regulatory Guide 1.193.
The NRC staff encourages and welcomes comments and suggestions in
connection with improvements to published regulatory guides, as well as
items for inclusion in regulatory guides that are currently being
developed. You may submit comments by any of the following methods.
Mail comments to: Rules and Directives Branch, Office of
Administration, U.S. Nuclear Regulatory Commission, Washington, DC
20555-0001.
Hand-deliver comments to: Rules and Directives Branch, Office of
Administration, U.S. Nuclear Regulatory Commission, 11555 Rockville
Pike, Rockville, Maryland 20852, between 7:30 a.m. and 4:15 p.m. on
Federal workdays.
Fax comments to: Rules and Directives Branch, Office of
Administration, U.S. Nuclear Regulatory Commission at (301) 415-5144.
Requests for technical information about Revision 1 of Regulatory
Guide 1.193 may be directed to Wallace E. Norris, at (301) 415-6796 or
WEN@nrc.gov.
Regulatory guides are available for inspection or downloading
through the NRC's public Web site in the Regulatory Guides document
collection of the NRC's Electronic Reading Room at https://www.nrc.gov/
reading-rm/doc-collections/. Electronic copies of Revision 1 of
Regulatory Guide 1.193 are also available in the NRC's Agencywide
Documents Access and Management System (ADAMS) at https://www.nrc.gov/
reading-rm/adams.html, under Accession ML052140501. Note,
however, that the NRC has temporarily suspended public access to ADAMS
so that the agency can complete security reviews of publicly available
documents and remove potentially sensitive information. Please check
the NRC's Web site for updates concerning the resumption of public
access to ADAMS.
In addition, regulatory guides are available for inspection at the
NRC's Public Document Room (PDR), which is located at 11555 Rockville
Pike, Rockville, Maryland; the PDR's mailing address is USNRC PDR,
Washington, DC 20555-0001. The PDR can also be reached by telephone at
(301) 415-4737 or (800) 397-4205, by fax at (301) 415-3548, and by e-
mail to PDR@nrc.gov. Requests for single copies of draft or final
guides (which may be reproduced) or for placement on an automatic
distribution list for single copies of future draft guides in specific
divisions should be made in writing to the U.S. Nuclear Regulatory
Commission, Washington, DC 20555-0001, Attention: Reproduction and
Distribution Services Section; by e-mail to DISTRIBUTION@nrc.gov; or by
fax to (301) 415-2289. Telephone requests cannot be accommodated.
Regulatory guides are not copyrighted, and Commission approval is
not required to reproduce them.
(5 U.S.C. 552(a))
Dated at Rockville, Maryland, this 15th day of August, 2005.
For the U.S. Nuclear Regulatory Commission.
Carl J. Paperiello,
Director, Office of Nuclear Regulatory Research.
[FR Doc. 05-19445 Filed 9-28-05; 8:45 am]
BILLING CODE 7590-01-P