Milk for Manufacturing Purposes and Its Production and Processing; Requirements Recommended for Adoption by State Regulatory Agencies, 48515-48517 [05-16376]

Download as PDF 48515 Notices Federal Register Vol. 70, No. 159 Thursday, August 18, 2005 This section of the FEDERAL REGISTER contains documents other than rules or proposed rules that are applicable to the public. Notices of hearings and investigations, committee meetings, agency decisions and rulings, delegations of authority, filing of petitions and applications and agency statements of organization and functions are examples of documents appearing in this section. DEPARTMENT OF AGRICULTURE Agricultural Marketing Service [DA–03–07] Milk for Manufacturing Purposes and Its Production and Processing; Requirements Recommended for Adoption by State Regulatory Agencies Agricultural Marketing Service, USDA. ACTION: Final notice. AGENCY: SUMMARY: This document proposes to adopt as a final notice add to the recommended manufacturing milk requirements (Recommended Requirements) by providing provisions for sheep milk, adding follow-up procedures used when plantcommingled milk in storage tanks exceeds the maximum allowable bacterial estimate, and providing a definition for heat-treated cream. The notice to add to the recommended manufacturing milk requirements (Recommended Requirements) was initiated at the request of the Dairy Division of the National Association of State Departments of Agriculture (NASDA) and developed in cooperation with NASDA, the Food and Drug Administration (FDA), dairy trade associations, and producer groups. This document also proposes certain other changes to the Recommended Requirements for clarity and consistency. DATES: Submit written or electronic comments on or before October 17, 2005. ADDRESSES: You may use any of the following methods to file comments on this action: By mail: Reginald Pasteur, Marketing Specialist, Standardization Branch, Dairy Programs, STOP 0230 (Room 2746 South Building), Agricultural Marketing Service, U.S. Department of Agriculture, VerDate jul<14>2003 12:20 Aug 17, 2005 Jkt 205001 1400 Independence Avenue, SW., Washington, DC 20250–0230 By fax: (202) 720–2643, By e-mail: Reginald.Pasteur@usda.gov or via the electronic process available at the Federal eRulemaking portal at https://www.regulations.gov Comments should reference the docket number and the date and page number of this issue of the Federal Register. Any comments received may be inspected at the above address during regular business hours (8 a.m.—4:30 p.m.) or accessed via the Internet at https://www.ams.usda.gov/dairy/ stand.htm. The current Recommended Requirements are available either from the above mailing address or by accessing the following internet address: https://www.ams.usda.gov/dairy/ manufmlk.pdf. The proposed changes to the Recommended Requirements are also available from the above mailing address or by accessing the following Internet address: https:// www.ams.usda.gov/dairy/dockets.htm. FOR FURTHER INFORMATION CONTACT: Reginald Pasteur, Marketing Specialist, Standardization Branch, Dairy Programs, AMS, USDA, telephone (202) 720–7473 or e-mail Reginald.Pasteur@usda.gov. SUPPLEMENTARY INFORMATION: Under the authority of the Agricultural Marketing Act of 1946, as amended (7 U.S.C. 1621– 1627), the United States Department of Agriculture maintains a set of model regulations relating to quality and sanitation requirements for the production and processing of manufacturing grade milk. These Recommended Requirements are developed by AMS and recommended for adoption and enforcement by the various States that regulate manufacturing grade milk. The purpose of the model requirements is to promote uniformity in State dairy laws and regulations relating to manufacturing grade milk. In consultation with representatives from NASDA, State regulatory agencies, FDA, and dairy industry trade associations, the Department prepared the Recommended Requirements to promote uniformity in State dairy laws and regulations for manufacturing grade milk. To accommodate changes that have occurred in the dairy industry, NASDA and various State officials have from time to time requested USDA to PO 00000 Frm 00001 Fmt 4703 Sfmt 4703 update the Recommended Requirements. During its July 2003 annual meeting, the Dairy Division of NASDA passed resolutions requesting USDA to provide provisions for sheep milk, add followup procedures used when plantcommingled milk in storage tanks exceeds the maximum allowable bacterial estimate, and providing a definition for heat-treated cream. AMS reviewed these resolutions and developed a draft that identified the changes associated with this request. This draft was provided to State regulatory officials and dairy trade association representatives for informal discussion prior to publication in the Federal Register. The requirements of Executive Order 13132, Federalism, were considered in developing this notice, and it has been determined that this action does not have federalism implications as defined under the executive order. This action does not have substantial effects on the States (the relationship between the national government and the States or on the distribution of power and responsibilities among the various levels of government). The adoption of the Recommended Requirements by State regulatory agencies is voluntary. States maintain the responsibility to establish dairy regulations and continue to have the option to establish regulations that are different from the Recommended Requirements. A State may choose to have requirements less restrictive or more stringent than the Recommended Requirements. Their decision to have different requirements would not affect the ability of milk producers to market milk or of procession plants to produce dairy products in their state. AMS is publishing this notice with a 60-day comment period to provide a sufficient time for interested persons to comment on the changes. Based on the recommended requirements which were published in the Federal Register issue of April 7, 1972 (37 FR 7046) and amended August 27, 1985 (50 FR 34726), May 6, 1993 (58 FR 86), and September 12, 1996 (61 FR 48120), the changes are summarized as follows: Sheep Milk Definition The definition of sheep milk will be to include: Section B2(l)(3)—Sheep milk is the lacteal secretion practically free E:\FR\FM\18AUN1.SGM 18AUN1 48516 Federal Register / Vol. 70, No. 159 / Thursday, August 18, 2005 / Notices from colostrums obtained by the complete milking of one or more healthy ewes. Sheep milk shall be produced according to the sanitary standards of this ordinance. the sheep housing area and the sheep milking parlor is required if sheep milker units are stored in the parlor. Hogs and fowl shall not be housed with sheep. Water Buffalo Milk Definition Milking Procedure The requirements for sheep milking procedure will include: Section D3(d)— Milking equipment used for handling abnormal milk must be washed and sanitized after such use. Section D3 (e)—Abnormal milk must not be squirted on the floor, on the platform, or in the producer’s hand. Producers should also wash their hands after handling such equipment and handling the teats and udders of animals producing abnormal milk. The definition of water buffalo milk will be to include: Section B2(l)(4)— Water buffalo milk is the normal lacteal secretion practically free of colostrums, obtained by the complete milking of one or more healthy water buffalo. Water buffalo milk shall be produced according to the sanitary standards of this ordinance. Lactating Animals Definition The definition of lactating animals will be to include: Section B2(l)(5)— Lactating animals are cows, goats, sheep, and water buffalo producing milk for manufacturing purposes. Milk Term The term ‘‘milk’’ will be to include: Section B2(l)(6)—The word ‘‘milk’’ used herein includes only milk, goat’s milk, sheep’s milk, and water buffalo milk for manufacturing purposes. Somatic Cell Count The requirements for sheep milk somatic cell count will be to include: Section C11 (e), (e)2, and (f)—750,000 per ml for sheep milk. Farm Requirements The requirements for abnormal sheep milk will be to include: Section D1(d)— Abnormal milk is milk which is ropy, stringy, clotted, thick, or abnormal in any way. It includes milk containing pesticides, insecticides, or medicinal agents. Regular equipment may be used but not until all other animals are milked. Milking Facility and Housing The requirements for a sheep milking facility will include: Section D2(b)— Floors for a sheep milking facility shall be constructed of concrete or equally impervious material maintained free of breaks or depressions. They must be sloped to drain properly. Joints between floor and wall shall be water tight. Ramps and platforms used to elevate the sheep for milking must be constructed of an impervious material such as steel (wooden platforms and ramps are not allowed). Rubber cow mats may be used as long as they are not placed over a wooden platform. Sheep are generally housed in a loose housing building near the milking parlor. This area should be kept reasonably clean. No excessive accumulation of manure is allowed. Complete separation between VerDate jul<14>2003 12:20 Aug 17, 2005 Jkt 205001 Cooling and Storage The requirements for cooling sheep milk will include: A. Milk in plastic bags shall be cooled to 40 °F or lower within two hours of milking. Sheep milk shall be cooled to 45 degrees Fahrenheit or less within two (2) hours of milking. Cooling water used in bulk tanks in which bags of sheep milk are cooled shall be chlorinated. If milk is cooled by pouring into plastic bags and then floating the bags of milk in cooling water, the process must preclude contamination of the milk by the water. All water must be safe and of sanitary quality in accordance to Section D7. B. Bags used to store frozen sheep milk shall be constructed of plastic that is listed under the NCIMS Certified Manufacturers of Single-Service Containers and Related Products. C. Bags may be up to 5 gallons in size. Each bag shall be numbered, dated, and identified with a patron name or number. D. Frozen sheep milk should remain frozen at 0°F or less for a period not to exceed 12 months. Milkhouse or Milkroom The requirements will include: Sec. D5(a)(i)—A milkhouse must be provided for storage and cooling of milk and proper cleaning and storage of equipment. The milkhouse area is the area that needs to be modified to meet the peculiar needs of sheep milking operations. The following requirements apply to a milkhouse whether or not a bulk tank is used: milk may not be placed directly in the freezer prior to cooling. Natural and/or artificial light shall be provided in all working areas for conducting milkhouse operations. At least 20 foot candles of artificial light are required in a milking parlor. Parlors must be properly ventilated in order to PO 00000 Frm 00002 Fmt 4703 Sfmt 4703 prevent excessive condensation and odors. Light fixtures shall not be installed directly above bulk milk tanks, areas where milk may be strained, or areas where equipment is stored. Sec. D5(b)(i)—A double compartment wash sink with hot and cold running water plumbed to the sink is required. Each compartment must be large enough to accommodate the largest piece of equipment. Hot water heaters or hot water supply systems for use in the milkhouse or milk room shall have a capacity of at least 30 gallons for the manual washing of equipment. Clean in place washing of pipelines, units, and bulk tanks requires the capacity of 75 gallons. Water under pressure must be piped into the milkhouse to perform cleaning of the equipment. Walls and ceilings must be reasonably smooth and be painted or whitewashed or have other acceptable finish; it shall be kept in good repair and surfaces shall be finished whenever wear or discoloration is evident. Ceilings must be dust tight. Hay or straw chutes must have dusttight doors that must be kept closed during milking. Utensils and Equipment Requirements will include: Sec. D6 (a)(i)—Milk contact surfaces shall be made of stainless steel of the 300 series, equally corrosion-resistant non-toxic metals or heat-resistant glass. Plastic or rubber-like material must be relatively inert and resistant to scoring, chipping, or decomposition, and it must be nontoxic and not impair flavor or odor to the product. All milk contact material must be easily cleaned and must be cleaned after each use. Sanitizers must be an approved type with full label directions. Syringes and bolus guns shall be stored in a manner to preclude any contamination of milk or milk contact surfaces. All containers and utensils must be free from breaks and corrosion, and points must be free from pits or cracks. Bulk tank and freezer thermometers should be accurate within ±2 degrees Fahrenheit. All milk containers and equipment, including milking machine vacuum hoses, must be stored in the milkhouse. Milking equipment must be stored to assure complete drainage. Filters and single-service plastic bags shall be stored in the original container inside a protective box. Bags for milk storage must be stored in a manner which protects them from contamination. It is recommended they be stored in an enclosed cabinet. Commingled Milk Requirements will include: E:\FR\FM\18AUN1.SGM 18AUN1 Federal Register / Vol. 70, No. 159 / Thursday, August 18, 2005 / Notices Sec. E1.8 Raw product storage A. All milk shall be held and processed under conditions and at temperatures that will avoid contamination and rapid deterioration. Drip milk from can washers or any other source shall not be used for the manufacture of dairy products. Bulk milk in storage tanks within the dairy plant shall be handled in such a manner as to minimize bacterial increase and shall be maintained at 45 degrees Fahrenheit or lower until processing begins. This does not preclude holding milk at higher temperatures for a period of time, where applicable to particular manufacturing or processing practices. B. The bacterial estimate of commingled milk in plant storage tanks shall be 1 million per milliliter or lower. C. During any consecutive six months, at least four samples of commingled raw milk for processing shall be taken by the regulatory agency from each plant. D. A laboratory test of these samples to determine the bacterial estimate shall be performed at a laboratory approved by the regulatory agency. E. Whenever a bacterial estimate of commingled milk in a plant indicates the presence of more than 1 million per milliliter, the following procedures shall be applied: 1. The regulatory agency shall notify plant management with a warning of excessive bacterial estimate and recommend that appropriate action be taken to eliminate the bacterial problem. 2. Whenever two of the last four consecutive commingled milk bacterial estimates exceed 1 million per milliliter, the regulatory agency shall notify plant management with a written warning notice. The notice shall be in effect so long as two of the last four consecutive samples exceed 1 million per milliliter. Plant management should continue to work to eliminate the bacterial problem. 3. An additional sample shall be taken by the regulatory agency after a lapse of 3 days but within 21 days of the notice required in paragraph (e)(1) of this section. If this sample also exceeds 1 million per milliliter, the plant license shall be suspended. A temporary status may be assigned to the plant by the appropriate regulatory agency when an additional sample of commingled milk is tested and found satisfactory. The plant shall be assigned a full reinstatement status when three out of four consecutive commingled bacterial estimates do not exceed 1 million per milliliter. The samples shall be taken at a rate of not more than two per week on separate days within a 3-week period. VerDate jul<14>2003 12:20 Aug 17, 2005 Jkt 205001 Heat-Treated Cream Definition The definition of heat-treated cream will be added to include: E 1.9(i) Heattreated cream—Heat-treated cream is cream in which the product may be heated to less than 160 degrees Fahrenheit in a continuing heating process and immediately cooled to 45 degrees Fahrenheit or less for a functional reason. (Authority: 7 U.S.C. 1621–1627) Dated: August 15, 2005. Lloyd C. Day, Administrator, Agricultural Marketing Service. [FR Doc. 05–16376 Filed 8–17–05; 8:45 am] BILLING CODE 3410–02–P DEPARTMENT OF AGRICULTURE Animal and Plant Health Inspection Service [Docket No. 05–064–1] Notice of Request for Extension of Approval of an Information Collection; Animal Welfare Animal and Plant Health Inspection Service, USDA. ACTION: Extension of approval of an information collection; comment request. AGENCY: SUMMARY: In accordance with the Paperwork Reduction Act of 1995, this notice announces the Animal and Plant Health Inspection Service’s intention to request an extension of approval of an information collection in support of the regulations issued under the Animal Welfare Act governing the humane handling, care, treatment, and transportation of certain animals by dealers, research institutions, exhibitors, carriers, and intermediate handlers DATES: We will consider all comments that we receive on or before October 17, 2005. ADDRESSES: You may submit comments by either of the following methods: • EDOCKET: Go to https:// www.epa.gov/feddocket to submit or view public comments, access the index listing of the contents of the official public docket, and to access those documents in the public docket that are available electronically. Once you have entered EDOCKET, click on the ‘‘View Open APHIS Dockets’’ link to locate this document. • Postal Mail/Commercial Delivery: Please send four copies of your comment (an original and three copies) to Docket No. 05–064–1, Regulatory Analysis and Development, PPD, APHIS, Station 3C71, 4700 River Road PO 00000 Frm 00003 Fmt 4703 Sfmt 4703 48517 Unit 118, Riverdale, MD 20737–1238. Please state that your comment refers to Docket No. 05–064–1. Reading Room: You may read any comments that we receive on this docket in our reading room. The reading room is located in room 1141 of the USDA South Building, 14th Street and Independence Avenue SW., Washington, DC. Normal reading room hours are 8 a.m. to 4:30 p.m., Monday through Friday, except holidays. To be sure someone is there to help you, please call (202) 690–2817 before coming. Other Information: You may view APHIS documents published in the Federal Register and related information on the Internet at https:// www.aphis.usda.gov/ppd/rad/ webrepor.html. For information regarding the regulations for the humane handling, care, treatment, and transportation of certain animals by dealers, research institutions, exhibitors, carriers, and intermediate handlers, contact Dr. Jerry DePoyster, Senior Staff Veterinarian, Animal Care, APHIS, 4700 River Road Unit 84, Riverdale, MD 20737–1234; (301) 734–7586. For copies of more detailed information on the information collection, contact Mrs. Celeste Sickles, APHIS’ Information Collection Coordinator, at (301) 734–7477. SUPPLEMENTARY INFORMATION: Title: Animal Welfare. OMB Number: 0579–0036. Type of Request: Extension of approval of an information collection. Abstract: The regulations in 9 CFR parts 1 through 3 were promulgated under the Animal Welfare Act (the Act) (7 U.S.C. 2131 et seq.) to ensure the humane handling, care, treatment, and transportation of regulated animals under the Act. The regulations in 9 CFR part 2 require documentation of specified information by dealers, research institutions, exhibitors, carriers, and intermediate handlers. The regulations in 9 CFR part 2 also require that facilities that use animals for regulated purposes obtain a license or register with the U.S. Department of Agriculture (USDA). Before being issued a USDA license, individuals are required to undergo prelicense inspections; once licensed, a licensee must periodically renew the license. The Act and regulations are enforced by USDA’s Animal and Plant Health Inspection Service (APHIS), which performs unannounced inspections of regulated facilities. A significant component of the inspection process is review of records that must be FOR FURTHER INFORMATION CONTACT: E:\FR\FM\18AUN1.SGM 18AUN1

Agencies

[Federal Register Volume 70, Number 159 (Thursday, August 18, 2005)]
[Notices]
[Pages 48515-48517]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 05-16376]


========================================================================
Notices
                                                Federal Register
________________________________________________________________________

This section of the FEDERAL REGISTER contains documents other than rules 
or proposed rules that are applicable to the public. Notices of hearings 
and investigations, committee meetings, agency decisions and rulings, 
delegations of authority, filing of petitions and applications and agency 
statements of organization and functions are examples of documents 
appearing in this section.

========================================================================


Federal Register / Vol. 70, No. 159 / Thursday, August 18, 2005 / 
Notices

[[Page 48515]]



DEPARTMENT OF AGRICULTURE

Agricultural Marketing Service

[DA-03-07]


Milk for Manufacturing Purposes and Its Production and 
Processing; Requirements Recommended for Adoption by State Regulatory 
Agencies

AGENCY: Agricultural Marketing Service, USDA.

ACTION: Final notice.

-----------------------------------------------------------------------

SUMMARY: This document proposes to adopt as a final notice add to the 
recommended manufacturing milk requirements (Recommended Requirements) 
by providing provisions for sheep milk, adding follow-up procedures 
used when plant-commingled milk in storage tanks exceeds the maximum 
allowable bacterial estimate, and providing a definition for heat-
treated cream. The notice to add to the recommended manufacturing milk 
requirements (Recommended Requirements) was initiated at the request of 
the Dairy Division of the National Association of State Departments of 
Agriculture (NASDA) and developed in cooperation with NASDA, the Food 
and Drug Administration (FDA), dairy trade associations, and producer 
groups. This document also proposes certain other changes to the 
Recommended Requirements for clarity and consistency.

DATES: Submit written or electronic comments on or before October 17, 
2005.

ADDRESSES: You may use any of the following methods to file comments on 
this action:
    By mail: Reginald Pasteur, Marketing Specialist, Standardization 
Branch, Dairy Programs, STOP 0230 (Room 2746 South Building), 
Agricultural Marketing Service, U.S. Department of Agriculture, 1400 
Independence Avenue, SW., Washington, DC 20250-0230
    By fax: (202) 720-2643,
    By e-mail: Reginald.Pasteur@usda.gov or via the electronic process 
available at the Federal eRulemaking portal at https://
www.regulations.gov
    Comments should reference the docket number and the date and page 
number of this issue of the Federal Register. Any comments received may 
be inspected at the above address during regular business hours (8 
a.m.--4:30 p.m.) or accessed via the Internet at https://
www.ams.usda.gov/dairy/stand.htm.
    The current Recommended Requirements are available either from the 
above mailing address or by accessing the following internet address: 
https://www.ams.usda.gov/dairy/manufmlk.pdf. The proposed changes to the 
Recommended Requirements are also available from the above mailing 
address or by accessing the following Internet address: https://
www.ams.usda.gov/dairy/dockets.htm.

FOR FURTHER INFORMATION CONTACT: Reginald Pasteur, Marketing 
Specialist, Standardization Branch, Dairy Programs, AMS, USDA, 
telephone (202) 720-7473 or e-mail Reginald.Pasteur@usda.gov.

SUPPLEMENTARY INFORMATION: Under the authority of the Agricultural 
Marketing Act of 1946, as amended (7 U.S.C. 1621-1627), the United 
States Department of Agriculture maintains a set of model regulations 
relating to quality and sanitation requirements for the production and 
processing of manufacturing grade milk. These Recommended Requirements 
are developed by AMS and recommended for adoption and enforcement by 
the various States that regulate manufacturing grade milk. The purpose 
of the model requirements is to promote uniformity in State dairy laws 
and regulations relating to manufacturing grade milk.
    In consultation with representatives from NASDA, State regulatory 
agencies, FDA, and dairy industry trade associations, the Department 
prepared the Recommended Requirements to promote uniformity in State 
dairy laws and regulations for manufacturing grade milk. To accommodate 
changes that have occurred in the dairy industry, NASDA and various 
State officials have from time to time requested USDA to update the 
Recommended Requirements.
    During its July 2003 annual meeting, the Dairy Division of NASDA 
passed resolutions requesting USDA to provide provisions for sheep 
milk, add follow-up procedures used when plant-commingled milk in 
storage tanks exceeds the maximum allowable bacterial estimate, and 
providing a definition for heat-treated cream. AMS reviewed these 
resolutions and developed a draft that identified the changes 
associated with this request. This draft was provided to State 
regulatory officials and dairy trade association representatives for 
informal discussion prior to publication in the Federal Register.
    The requirements of Executive Order 13132, Federalism, were 
considered in developing this notice, and it has been determined that 
this action does not have federalism implications as defined under the 
executive order. This action does not have substantial effects on the 
States (the relationship between the national government and the States 
or on the distribution of power and responsibilities among the various 
levels of government). The adoption of the Recommended Requirements by 
State regulatory agencies is voluntary. States maintain the 
responsibility to establish dairy regulations and continue to have the 
option to establish regulations that are different from the Recommended 
Requirements. A State may choose to have requirements less restrictive 
or more stringent than the Recommended Requirements. Their decision to 
have different requirements would not affect the ability of milk 
producers to market milk or of procession plants to produce dairy 
products in their state. AMS is publishing this notice with a 60-day 
comment period to provide a sufficient time for interested persons to 
comment on the changes.
    Based on the recommended requirements which were published in the 
Federal Register issue of April 7, 1972 (37 FR 7046) and amended August 
27, 1985 (50 FR 34726), May 6, 1993 (58 FR 86), and September 12, 1996 
(61 FR 48120), the changes are summarized as follows:

Sheep Milk Definition

    The definition of sheep milk will be to include: Section B2(l)(3)--
Sheep milk is the lacteal secretion practically free

[[Page 48516]]

from colostrums obtained by the complete milking of one or more healthy 
ewes. Sheep milk shall be produced according to the sanitary standards 
of this ordinance.

Water Buffalo Milk Definition

    The definition of water buffalo milk will be to include: Section 
B2(l)(4)--Water buffalo milk is the normal lacteal secretion 
practically free of colostrums, obtained by the complete milking of one 
or more healthy water buffalo. Water buffalo milk shall be produced 
according to the sanitary standards of this ordinance.

Lactating Animals Definition

    The definition of lactating animals will be to include: Section 
B2(l)(5)--Lactating animals are cows, goats, sheep, and water buffalo 
producing milk for manufacturing purposes.

Milk Term

    The term ``milk'' will be to include: Section B2(l)(6)--The word 
``milk'' used herein includes only milk, goat's milk, sheep's milk, and 
water buffalo milk for manufacturing purposes.

Somatic Cell Count

    The requirements for sheep milk somatic cell count will be to 
include: Section C11 (e), (e)2, and (f)--750,000 per ml for sheep milk.

Farm Requirements

    The requirements for abnormal sheep milk will be to include: 
Section D1(d)--Abnormal milk is milk which is ropy, stringy, clotted, 
thick, or abnormal in any way. It includes milk containing pesticides, 
insecticides, or medicinal agents. Regular equipment may be used but 
not until all other animals are milked.

Milking Facility and Housing

    The requirements for a sheep milking facility will include: Section 
D2(b)--Floors for a sheep milking facility shall be constructed of 
concrete or equally impervious material maintained free of breaks or 
depressions. They must be sloped to drain properly. Joints between 
floor and wall shall be water tight.
    Ramps and platforms used to elevate the sheep for milking must be 
constructed of an impervious material such as steel (wooden platforms 
and ramps are not allowed). Rubber cow mats may be used as long as they 
are not placed over a wooden platform. Sheep are generally housed in a 
loose housing building near the milking parlor. This area should be 
kept reasonably clean. No excessive accumulation of manure is allowed. 
Complete separation between the sheep housing area and the sheep 
milking parlor is required if sheep milker units are stored in the 
parlor. Hogs and fowl shall not be housed with sheep.

Milking Procedure

    The requirements for sheep milking procedure will include: Section 
D3(d)--Milking equipment used for handling abnormal milk must be washed 
and sanitized after such use. Section D3 (e)--Abnormal milk must not be 
squirted on the floor, on the platform, or in the producer's hand. 
Producers should also wash their hands after handling such equipment 
and handling the teats and udders of animals producing abnormal milk.

Cooling and Storage

    The requirements for cooling sheep milk will include:
    A. Milk in plastic bags shall be cooled to 40 [deg]F or lower 
within two hours of milking. Sheep milk shall be cooled to 45 degrees 
Fahrenheit or less within two (2) hours of milking. Cooling water used 
in bulk tanks in which bags of sheep milk are cooled shall be 
chlorinated. If milk is cooled by pouring into plastic bags and then 
floating the bags of milk in cooling water, the process must preclude 
contamination of the milk by the water. All water must be safe and of 
sanitary quality in accordance to Section D7.
    B. Bags used to store frozen sheep milk shall be constructed of 
plastic that is listed under the NCIMS Certified Manufacturers of 
Single-Service Containers and Related Products.
    C. Bags may be up to 5 gallons in size.
    Each bag shall be numbered, dated, and identified with a patron 
name or number.
    D. Frozen sheep milk should remain frozen at 0[deg]F or less for a 
period not to exceed 12 months.

Milkhouse or Milkroom

    The requirements will include: Sec. D5(a)(i)--A milkhouse must be 
provided for storage and cooling of milk and proper cleaning and 
storage of equipment. The milkhouse area is the area that needs to be 
modified to meet the peculiar needs of sheep milking operations. The 
following requirements apply to a milkhouse whether or not a bulk tank 
is used: milk may not be placed directly in the freezer prior to 
cooling.
    Natural and/or artificial light shall be provided in all working 
areas for conducting milkhouse operations. At least 20 foot candles of 
artificial light are required in a milking parlor. Parlors must be 
properly ventilated in order to prevent excessive condensation and 
odors. Light fixtures shall not be installed directly above bulk milk 
tanks, areas where milk may be strained, or areas where equipment is 
stored.
    Sec. D5(b)(i)--A double compartment wash sink with hot and cold 
running water plumbed to the sink is required. Each compartment must be 
large enough to accommodate the largest piece of equipment. Hot water 
heaters or hot water supply systems for use in the milkhouse or milk 
room shall have a capacity of at least 30 gallons for the manual 
washing of equipment. Clean in place washing of pipelines, units, and 
bulk tanks requires the capacity of 75 gallons. Water under pressure 
must be piped into the milkhouse to perform cleaning of the equipment. 
Walls and ceilings must be reasonably smooth and be painted or 
whitewashed or have other acceptable finish; it shall be kept in good 
repair and surfaces shall be finished whenever wear or discoloration is 
evident. Ceilings must be dust tight. Hay or straw chutes must have 
dust-tight doors that must be kept closed during milking.

Utensils and Equipment

    Requirements will include: Sec. D6 (a)(i)--Milk contact surfaces 
shall be made of stainless steel of the 300 series, equally corrosion-
resistant non-toxic metals or heat-resistant glass. Plastic or rubber-
like material must be relatively inert and resistant to scoring, 
chipping, or decomposition, and it must be non-toxic and not impair 
flavor or odor to the product. All milk contact material must be easily 
cleaned and must be cleaned after each use. Sanitizers must be an 
approved type with full label directions. Syringes and bolus guns shall 
be stored in a manner to preclude any contamination of milk or milk 
contact surfaces.
    All containers and utensils must be free from breaks and corrosion, 
and points must be free from pits or cracks. Bulk tank and freezer 
thermometers should be accurate within 2 degrees 
Fahrenheit.
    All milk containers and equipment, including milking machine vacuum 
hoses, must be stored in the milkhouse. Milking equipment must be 
stored to assure complete drainage. Filters and single-service plastic 
bags shall be stored in the original container inside a protective box. 
Bags for milk storage must be stored in a manner which protects them 
from contamination. It is recommended they be stored in an enclosed 
cabinet.

Commingled Milk

    Requirements will include:

[[Page 48517]]

Sec. E1.8 Raw product storage

    A. All milk shall be held and processed under conditions and at 
temperatures that will avoid contamination and rapid deterioration. 
Drip milk from can washers or any other source shall not be used for 
the manufacture of dairy products. Bulk milk in storage tanks within 
the dairy plant shall be handled in such a manner as to minimize 
bacterial increase and shall be maintained at 45 degrees Fahrenheit or 
lower until processing begins. This does not preclude holding milk at 
higher temperatures for a period of time, where applicable to 
particular manufacturing or processing practices.
    B. The bacterial estimate of commingled milk in plant storage tanks 
shall be 1 million per milliliter or lower.
    C. During any consecutive six months, at least four samples of 
commingled raw milk for processing shall be taken by the regulatory 
agency from each plant.
    D. A laboratory test of these samples to determine the bacterial 
estimate shall be performed at a laboratory approved by the regulatory 
agency.
    E. Whenever a bacterial estimate of commingled milk in a plant 
indicates the presence of more than 1 million per milliliter, the 
following procedures shall be applied:
    1. The regulatory agency shall notify plant management with a 
warning of excessive bacterial estimate and recommend that appropriate 
action be taken to eliminate the bacterial problem.
    2. Whenever two of the last four consecutive commingled milk 
bacterial estimates exceed 1 million per milliliter, the regulatory 
agency shall notify plant management with a written warning notice. The 
notice shall be in effect so long as two of the last four consecutive 
samples exceed 1 million per milliliter. Plant management should 
continue to work to eliminate the bacterial problem.
    3. An additional sample shall be taken by the regulatory agency 
after a lapse of 3 days but within 21 days of the notice required in 
paragraph (e)(1) of this section. If this sample also exceeds 1 million 
per milliliter, the plant license shall be suspended. A temporary 
status may be assigned to the plant by the appropriate regulatory 
agency when an additional sample of commingled milk is tested and found 
satisfactory. The plant shall be assigned a full reinstatement status 
when three out of four consecutive commingled bacterial estimates do 
not exceed 1 million per milliliter. The samples shall be taken at a 
rate of not more than two per week on separate days within a 3-week 
period.

Heat-Treated Cream Definition

    The definition of heat-treated cream will be added to include: E 
1.9(i) Heat-treated cream--Heat-treated cream is cream in which the 
product may be heated to less than 160 degrees Fahrenheit in a 
continuing heating process and immediately cooled to 45 degrees 
Fahrenheit or less for a functional reason.

(Authority: 7 U.S.C. 1621-1627)

    Dated: August 15, 2005.
Lloyd C. Day,
Administrator, Agricultural Marketing Service.
[FR Doc. 05-16376 Filed 8-17-05; 8:45 am]
BILLING CODE 3410-02-P
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.