Final Enforceable Consent Agreement and Testing Consent Order for Two Formulated Composites of Fluorotelomer-based Polymer Chemicals; Export Notification, 39624-39630 [05-13492]

Download as PDF 39624 Federal Register / Vol. 70, No. 130 / Friday, July 8, 2005 / Rules and Regulations ENVIRONMENTAL PROTECTION AGENCY 40 CFR Part 799 [OPPT–2004–0001; FRL–7710–4] Final Enforceable Consent Agreement and Testing Consent Order for Two Formulated Composites of Fluorotelomer-based Polymer Chemicals; Export Notification Environmental Protection Agency (EPA). ACTION: Notice of final consent agreement and order. AGENCY: SUMMARY: Under section 4 of the Toxic Substances Control Act (TSCA), EPA has issued a testing consent order (Order) that incorporates an enforceable consent agreement (ECA) with AGC Chemicals Americas, Inc.; Clariant GmbH; Daikin America, Inc.; and E.I. du Pont de Nemours and Company (the Companies). The Companies have agreed to perform incineration testing of two formulated composites of fluorotelomer-based polymer (FTBP) chemicals representative of chemicals applied to textile and paper products. This document announces the ECA and the Order that incorporates the ECA for this testing, and summarizes the terms of the ECA. As a result of the ECA and Order that incorporates the ECA, exporters of either of the formulated composites containing FTBP chemicals, including persons who do not sign the ECA, are subject to export notification requirements under section 12(b) of TSCA. This document adds the two formulated composites of FTBP chemicals to the table of testing consent orders for substances and mixtures without Chemical Abstract Service (CAS) Registry Numbers. Data developed from the ECA testing will contribute to the Agency’s efforts to determine whether municipal and/or medical waste incineration of FTBPs is a potential source and/or pathway of environmental and human exposure to perfluorooctanoic acid (PFOA). The data will also contribute to the Agency’s continuing efforts to achieve healthy communities and ecosystems. DATES: The effective date of the ECA, the Order that incorporates the ECA, and this action is July 8, 2005. ADDRESSES: EPA has established a docket for this action under docket identification (ID) number OPPT–2004– 0001. All documents in the docket are listed in the EDOCKET index at http:/ /www.epa.gov/edocket/. Although listed in the index, some information is not publicly available, i.e., Confidential VerDate jul<14>2003 16:55 Jul 07, 2005 Jkt 205001 Business Information (CBI) or other information whose disclosure is restricted by statute. Certain other material, such as copyrighted material, will not be placed on the Internet and will be publicly available only in hard copy form. Publicly available docket materials are available either electronically in EDOCKET or in hard copy at the OPPT Docket, EPA Docket Center, EPA West, Room B102, 1301 Constitution Ave., NW., Washington, DC. The Public Reading Room is open from 8:30 a.m. to 4:30 p.m., Monday through Friday, excluding legal holidays. The EPA Docket Center Reading Room telephone number is (202) 566–1744 and the telephone number for the OPPT Docket, which is located in EPA Docket Center, is (202) 566–0280. FOR FURTHER INFORMATION CONTACT: For general information contact: Colby Lintner, Regulatory Coordinator, Environmental Assistance Division (7408M); telephone number: (202) 554– 1404; e-mail address: TSCAHotline@epa.gov. For information on the ECA, contact: Richard W. Leukroth, Jr., Chemical Control Division (7405M); telephone number: (202) 564–8167; fax number: (202) 564–4765; e-mail address: leukroth.rich@epa.gov. For technical information on testing and availability of ECA test data, contact: John Blouin, Economics, Exposure and Technology Division (7406M); telephone number: (202) 564– 8519; fax number: (202) 564–8528; email address: blouin.john@epa.gov. For technical information on export notification, contact: Richard W. Leukroth, Jr., Chemical Control Division (7405M); telephone number: (202) 564– 8167; fax number: (202) 564–4765; email address: leukroth.rich@epa.gov or Laura L. Bunte, Chemical Control Division (7405M); telephone number: (202) 564–8087; fax number: (202) 564– 4765; e-mail address: bunte.laura@epa.gov. To contact any of these individuals by mail, identify the individual by name and Division indicated for that person, and use this address: Office of Pollution Prevention and Toxics (OPPT), Environmental Protection Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460–0001. SUPPLEMENTARY INFORMATION: I. General Information A. Does this Action Apply to Me? This action is directed to the public in general. The requirements in the ECA and the Order that incorporates the ECA only apply to those companies that are PO 00000 Frm 00002 Fmt 4701 Sfmt 4700 specifically named in the ECA. As of July 8, 2005, any person who exports or intends to export either of the two formulated composites of FTBP chemicals that are the subject of the ECA and the Order that incorporates the ECA are subject to the export notification requirements of TSCA section 12(b) (see 40 CFR part 707, subpart D, and Unit IV.B.). Although other types of entities could also be affected, most chemical manufacturers are usually identified under North American Industrial Classification System (NAICS) code 325. If you have any questions regarding the applicability of this action to a particular entity, contact persons listed under FOR FURTHER INFORMATION CONTACT. B. How Can I Access Electronic Copies of this Document and Other Related Information? In addition to using EDOCKET (http:/ /www.epa.gov/edocket/), you may access this Federal Register document electronically through the EPA Internet under the ‘‘Federal Register’’ listings at https://www.epa.gov/fedrgstr/. A frequently updated electronic version of 40 CFR part 799 is available on E-CFR Beta Site Two at https:// www.gpoaccess.gov/ecfr/. Information on TSCA 12(b) export notification (40 CFR part 707) is available at https:// www.epa.gov/oppt/chemtest/ sect12b.htm. II. Background A. What are FTBP Chemicals? FTBP chemicals are polymers manufactured from a fluorinated chemical intermediate via a telomerization process. Telomerization is the reaction of a telogen (such as pentafluoroethyl iodide) with a polymerizable compound (such as tetrafluoroethylene) to form a low molecular weight polymer with few repeating units, known as ‘‘telomers.’’ FTBPs are the major chemical constituents of telomer-based polymeric products (TBPPs), which are used in many industrial and consumer products. TBPPs are applied as soil, stain, and water resistant coatings to textiles, carpet, leather, stone and tile products; as grease, oil and water resistant coatings on paper products; and, as surfactants and intermediates. B. Why Does EPA Need Environmental Effects Data on FTBP Chemicals? EPA has identified potential human health concerns from exposure to PFOA and its salts. The Agency is concerned that fluorinated telomers used to E:\FR\FM\08JYR4.SGM 08JYR4 Federal Register / Vol. 70, No. 130 / Friday, July 8, 2005 / Rules and Regulations manufacture FTBPs may be a source and/or pathway to environmental and human exposure to PFOA because FTBP chemicals may metabolize or degrade to PFOA by mechanisms that are not fully understood at this time. EPA believes that the nine individual FTBPs (see Unit III.B.) with their associated chemistries, particularly the bond strength of the common C-F bonds, are representative of the manner in which FTBPs will degrade, potentially forming PFOA when incinerated under the conditions simulated by this ECA testing program. The F-(CF2)x- and -(CF2-CF2)xmoieties are common to the individual FTBPs, and the two formulated composites of FTBP chemicals that are the subject of the ECA and the Order that incorporates the ECA are representative of the individual fluorotelomer components and the remaining non-component FTBPs, for all FTBPs used in commerce. In September 2002, EPA’s OPPT initiated a priority review of PFOA because developmental toxicity, carcinogenicity, and blood-monitoring data presented in an interim revised hazard assessment raised the possibility that PFOA might present a significant risk to human health (Ref. 1). On January 4, 2005, OPPT’s Risk Assessment Division submitted a draft risk assessment of the potential human health effects associated with exposure to PFOA and its salts to EPA’s Science Advisory Board’s (SAB) Perfluorooctanoic Acid Risk Assessment Review Panel for peer review (Refs. 2 and 3). These assessments revealed uncertainties associated with the sources and pathways of human exposure. EPA believes that the information to be developed under the ECA testing will better inform the Agency regarding the potential source(s) and/or pathway(s) of environmental and human exposure to PFOA. III. ECA Development and Conclusion A. How is EPA Going to Obtain Environmental Testing on FTBP Chemicals? In the Federal Register of April 16, 2003 (68 FR 18626) (FRL–7303–8), EPA initiated a public process to negotiate ECAs concerning PFOA and fluorinated telomers. The two goals of the ECAs resulting from these public discussions are to develop environmental fate and transport data, as well as other data relevant to identifying the pathway(s) that result in human exposure to PFOA by air, water, or soil; and, to characterize how PFOA gets into those pathways, including the products or processes that are responsible for the VerDate jul<14>2003 16:55 Jul 07, 2005 Jkt 205001 presence of PFOA in the environment. EPA anticipates that the data to be developed under such ECAs will be supplemental to data being generated by ongoing testing efforts described under industry letters of intent (LOIs) (Refs. 4– 7). In preparation for the initial public meeting on June 6, 2003, EPA developed a preliminary framework document (Ref. 8) outlining Agency data needs that address the outstanding PFOA source and exposure pathway questions identified in the Federal Register notice of April 16, 2003. EPA’s preliminary framework document was intended to serve as a discussion guide for the June 6, 2003, public meeting and to aid in distinguishing between outstanding EPA data needs and industry LOI commitments. The preliminary framework document was not a predetermined list of information needs defining the outcome of the ECA process. The ECA described in this document provides for a laboratory-scale incineration testing program for two formulated composites of FTBP chemicals. Incineration testing of FTBPs is one of the data needs identified in EPA’s preliminary framework document for PFOA. On June 6, 2003, the PFOA Plenary Group (consisting of EPA and all parties who had identified themselves as being interested in the ECA development proceedings after publication of the April 16, 2003 Federal Register notice) acknowledged that such a testing program was an opportunity for ECA development. The PFOA Plenary Group tasked the Telomer Technical Workgroup (a subgroup of the PFOA Plenary Group) with working out the details that could be incorporated into an ECA between the Companies and EPA. On July 9, 2003, the Telomer Technical Workgroup received proposals from the Companies and EPA (Refs. 9 and 10) for incineration testing of FTBPs. Details of the testing program were then developed by members of the Telomer Incineration Subgroup (a subgroup of the Telomer Technical Workgroup) and the subgroup and workgroup reached consensus on the testing to be required under the ECA. On March 30, 2004, the Telomer Technical Workgroup acknowledged that this testing program had sufficient merit for consideration by the PFOA Plenary Group (Ref. 11). On April 1, 2004, the PFOA Plenary Group discussed the merit of this testing program and recommended that EPA consider entering into an ECA with the Companies (Ref. 12). EPA agreed and initiated steps to enter into this ECA PO 00000 Frm 00003 Fmt 4701 Sfmt 4700 39625 with the Companies. On February 8, 2005, EPA received the ECA signed by the Companies, and on June 28, 2005, EPA signed the ECA and the Order that incorporates the ECA. The effective date of the ECA and the Order that incorporates the ECA is July 8, 2005. EPA uses ECAs to accomplish testing of chemicals for health and environmental effects where a consensus exists concerning the need for and scope of testing (40 CFR 790.1(c)). The procedures for ECA negotiations and the factors for determining whether a consensus exists are described at 40 CFR 790.22 and 790.24, respectively. B. What is the Subject of the ECA and Order Incorporating the ECA? As specified under the ECA, two formulated composites of FTBP chemicals are the subject of and will be tested under the ECA and the Order that incorporates the ECA. Appendix A and Part XXIV. (individual company signature pages) of the ECA provide details on: The rationale for formulating two composites that represent TBPP chemicals specifically applied to textile and/or paper products, the identity of the FTBP chemicals used to formulate each composite, the procedures for formulating each composite, and the procedures by which each company will contribute the FTBP chemical(s) for which it is obligated under the terms of the ECA. The paper composite will contain three FTBP chemicals as specified in Appendix A and Part XXIV. of the ECA. The textile composite will contain six FTBP chemicals as specified in Appendix A and Part XXIV. of the ECA. The nine FTBP chemicals to be formulated into the paper and textile composites that are subject to the ECA and the Order that incorporates the ECA are identified as: Perfluoroalkylethyl acrylate copolymer, EPA-designated accession number (ACC) 171790; perfluoroalkyl acrylate copolymer, ACC 158022; perfluoroalkyl methacrylate polymer, document control number (DCN) 63040000037A; substituted methacrylate, propenoic acid, perfluoroalkyl esters, DCN 63040000033B; perfluoroalkyl acrylic polymer, DCN 63040000037C; poly.beta.-fluoroalkylethyl acrylate and alkyl acrylate, ACC 174993; poly(.beta.fluoroalkylethyl acrylate and alkyl acrylate), ACC 70430; polysubstituted acrylic copolymer, ACC 157381; and perfluoroalkyl acrylate copolymer latex, ACC 70907. EPA cannot publicly identify the content of the paper and textile composites with any greater degree of specificity, given the need to protect the Companies’ CBI. E:\FR\FM\08JYR4.SGM 08JYR4 39626 Federal Register / Vol. 70, No. 130 / Friday, July 8, 2005 / Rules and Regulations EPA uses a variety of numerical identification systems for tracking chemicals. These include CAS numbers assigned to non-confidential chemicals, premanufacture notice (PMN) numbers assigned by EPA when chemicals enter EPA’s new chemical review process, document control numbers (DCN) assigned by the EPA OPPT’s Confidential Business Information Center for EPA tracking, and Accession (ACC) numbers provided by EPA when a chemical identity listed on the TSCA Inventory has been claimed as TSCA CBI. In addition, chemicals that qualify for a reporting exemption under the Polymer Exemption Rule (40 CFR 723.250) may have a commercial trade identity or an IES Method I (CAS Inventory Expert Service) name assigned. C. What Testing Does the ECA for FTBP Chemicals Require? The ECA for laboratory-scale incineration testing of two composites of FTBP chemicals requires environmental testing, as described in Table 1 of this unit, which sets forth the required testing, test standards, and reporting requirements for testing to be conducted under the ECA. The testing included in the ECA will be conducted in two segments, as follows: Phase I—PFOA Transport Testing (Phase I) and Phase II— Fluorotelomer Incineration Testing (Phase II). Phase I will consist of quantitative transport efficiency testing for PFOA. At the conclusion of Phase I, the Companies will provide EPA with a letter report summarizing the results. In the event that the transport efficiency of PFOA or total fluorine is equal to or greater than 70%, testing will proceed to Phase II. In the event that the transport efficiency of PFOA and total fluorine are both individually less than 70%, the Companies will initiate a technical consultation with EPA to reach agreement on how to proceed. The various outcomes of such a technical consultation are laid out in Part VIII. of the ECA. Under Phase II, elemental analysis, combustion stoichiometry, thermogravimetric analysis, laboratoryscale combustion testing, and, if required under the ECA (see Table 1, footnote 9 of this unit), release assessment reporting will be performed for the two composites of FTBP chemicals that are the subject of the ECA. TABLE 1.—REQUIRED TESTING, TEST STANDARDS, REPORTING REQUIREMENTS: PHASES OF THE TESTING PROGRAM FOR THE INCINERATION OF FTBP COMPOSITES Phase I PFOA Transport Testing Testing Standard/Reporting requirements Deadline Phase I Study Plan(s) 40 CFR 790.62(b) as annotated by Part X. of the ECA 60 EPA Requirements for Quality Assurance Project Plans (QA/R5) 10 90 240 1 (Days) 3 Appendix C.1. of the ECA (Days) 3 Phase I Quality Assurance Project Plan(s) 1 Quantitative PFOA transport testing 2 4,5 Phase II Fluorotelomer Incineration Testing Test Standard/Reporting requirements Deadline 3 Phase II Study Plan(s) 40 CFR 790.62(b) as annotated by Part X. of the ECA 60 Phase II Quality Assurance Project Plan(s) EPA Requirements for Quality Assurance Project Plans (QA/R5) 10 180 Receipt of composite components by designated facility(ies) Part XXIV. and Appendix A.3. of the ECA 90 Appendix C.2.1. of the ECA 720 8 Appendix C.2.2. of the ECA 720 8 ASTM E1868–02, as modified in Appendix B.1. of the ECA 720 8 Appendices C.2.4. and C.2.5., as annotated/supplemented by Appendices D.1., D.2., D.3., and D.4. of the ECA 720 8 Appendix E.2. of the ECA 720 9 Elemental Analysis 6 Combustion Stoichiometry 6 Thermogravimetric Analysis 6 Laboratory-scale Combustion Testing 6 Release Assessment Report 1 Number 3 7 of days, starting with the day following the event starting the time period in question. Interim progress reports must be submitted by the Companies to EPA every 180 days beginning 180 days from July 8, 2005, until the end of the ECA testing program (see Part XIV. and Appendix E.1. of the ECA). 2 At the conclusion of Phase I, and prior to initiation of Phase II, the Companies will provide a letter report to EPA summarizing the results of Phase I testing (see Part VII.A. of the ECA). In the event that the transport efficiency of PFOA or of total fluorine (as determined by the formulas in Appendix C.1. of the ECA) is greater than or equal to 70%, then the Companies will proceed to Phase II. In the event that the transport efficiency of PFOA and of total fluorine (as determined by the formulas in Appendix C.1. of the ECA) are both individually less than 70% then the Companies will initiate a Technical Consultation with EPA. The outcomes of the Technical Consultation are described in Part VIII. of the ECA. 3 Number of days after July 8, 2005, when submission is due. 4 Number of days after EPA approval of the Study Plan(s) and QAPP(s) for Phase I testing when a letter report describing transport efficiency test result(s) and any contingency testing performed is due to EPA (see Part VII.A. and Appendix C.1.3. of the ECA). If the Study Plan(s) and QAPP(s) are not approved by EPA within 60 days of submission of the Phase I QAPP(s), then this deadline is extended by 180 days to accommodate re-scheduling with the thermal reactor system laboratory. 5 The final report for Phase I will be submitted to EPA within 60 days of the completion of the Technical Consultation if the consultation does not result in an agreement to conduct further testing. If the Technical Consultation results in an agreement to conduct further testing, the final report for Phase I will be included in the final report for such further testing, unless agreed otherwise in the Technical Consultation (see Part VIII. of the ECA). 6 The results of this testing will be provided in the final report for Phase II (see Appendix C.2.5. and Appendix E.3. of the ECA). VerDate jul<14>2003 18:03 Jul 07, 2005 Jkt 205001 PO 00000 Frm 00004 Fmt 4701 Sfmt 4700 E:\FR\FM\08JYR4.SGM 08JYR4 Federal Register / Vol. 70, No. 130 / Friday, July 8, 2005 / Rules and Regulations 39627 7 Number of days from the submission of the Phase I letter report signifying that Phase II can proceed and the approval by EPA of the Phase II QAPP(s) that the Companies must meet their individual obligations to provide the designated facility(ies) with the components for each composite to be tested under the ECA (see Part III.B. of the ECA). If Phase II is required by Technical Consultation agreement (see footnote 2 of this table), the deadline shall be as agreed in the Technical Consultation. 8 Number of days from the submission of a Phase I letter report signifying that Phase II testing can proceed, and the approval of Study Plan(s) and QAPP(s) for the Phase II testing when the report is due, if all components of each composite are received, or EPA determines that testing shall proceed with a partial composite(s) (see Part III.B. of this ECA). If the study plan(s) and QAPP(s) are not approved within 60 days of submission of the Phase II QAPP(s), then this deadline is extended by 180 days to accommodate re-scheduling with the thermal reactor system laboratory. If Phase II testing is required by Technical Consultation agreement (see footnote 2 of this table), the deadline shall be as agreed in the Technical Consultation. 9 In the event that Phase II laboratory-scale incineration testing identifies measurable levels of PFOA resulting from the incineration testing for any or all of the fluorotelomer composites tested under this ECA, as defined in Appendix C.2.5.5. of the ECA, the Companies will prepare a Release Assessment Report to place in perspective the relevance of such measurable levels in the laboratory-scale incineration testing results with respect to full-scale municipal and/or medical waste incinerator operations in the United States. If required, the Release Assessment Report will be submitted in conjunction with the Final Report for Phase II testing (see footnotes 6 and 8 of this table). 10 Guidance for developing Quality Assurance Project Plans can be found in the EPA document EPA QA/R-5: EPA Requirements for Quality Assurance Project Plans, prepared by: Office of Environmental Information, EPA, March 2001. This is also available from the EPA website at https://epa.gov/quality/qs-docs. D. What are the Uses for the Test Data to be Developed Under the ECA? EPA will use the data obtained from the testing to be conducted under the ECA to assess the potential for waste incineration of FTBPs to emit PFOA. This analysis will be based on quantitative determination of potential exhaust-gas levels of PFOA that may emanate from laboratory-scale combustion testing under conditions representative of typical municipal and/ or medical waste combustor operations in the United States. The data could provide EPA with an understanding of whether the incineration of FTBPs is a source and/or pathway for environmental and human exposure to PFOA. These data could also be used to inform screening level human and environmental exposure assessments. In addition, the data could be used by other Federal Agencies (e.g., the Agency for Toxic Substances and Disease Registry (ATSDR), the National Institute for Occupational Safety and Health (NIOSH), the Occupational Safety and Health Administration (OSHA), the Consumer Product Safety Commission (CPSC), and the Food and Drug Administration (FDA)) in assessing chemical risks and in taking appropriate actions within their programs. IV. Other Impacts of the ECA A. What if EPA Should Require Additional Environmental Testing on FTBP Chemicals? If EPA decides in the future that it requires additional data on FTBPs, the Agency would initiate a separate action. B. How Does the Order Affect TSCA Export Notification? As of the effective date of the ECA and the Order that incorporates the ECA under TSCA section 4 (i.e., the date of publication of this document in the Federal Register) any of the Companies, as well as any other person, who exports or intends to export either of the two VerDate jul<14>2003 16:55 Jul 07, 2005 Jkt 205001 formulated composites of FTBP chemicals that are the subject of this ECA and Order that incorporates the ECA, in any form, are subject to the export notification requirements of TSCA section 12(b). Procedures related to export notification are described in 40 CFR part 707, subpart D. EPA maintains lists of all chemical substances and mixtures with CAS numbers (40 CFR 799.5000) and without CAS numbers (40 CFR 799.5025) that are subject to testing consent orders. This document will add the two formulated composites of FTBP chemicals that are the subject of this ECA and Order that incorporates the ECA to the list at 40 CFR 799.5025. Notice and comment rulemaking is not needed to add these chemical substances to the list at 40 CFR 799.5025 because the export notification requirements are imposed by statute. Section 12(b) of TSCA requires any person who exports or intends to export to a foreign country a chemical substance or mixture for which the submission of data is required under TSCA section 4 to submit a notification of the export or intended export to EPA. An ECA is an action under TSCA section 4 requiring the submission of data. 40 CFR 790.1. Accordingly, EPA’s ECA regulations require that each ECA contain a statement that manufacturers or processors signing the ECA, as well as any other person, shall comply with export notification requirements in TSCA section 12(b). 40 CFR 790.60(a)(11). The two formulated composites of FTBP chemicals identified in this document are subject to an Order incorporating an ECA. EPA finds that notice and an opportunity for comment is unnecessary to implement the export notification requirements in TSCA section 12(b) for the reasons stated in this unit. For chemical substances and mixtures subject to other Orders incorporating ECAs that were issued in the past, EPA initiated separate rulemakings to amend PO 00000 Frm 00005 Fmt 4701 Sfmt 4700 the lists at 40 CFR 799.5000 and 40 CFR 799.5025, thereby affording the public a comment opportunity as well as notifying the public of the existence of an ECA. EPA took this step to ensure that those companies not a party to the ECA or Order noticed their need to comply with TSCA section 12(b). However, EPA now believes that a separate rulemaking or an opportunity to comment on the implementation of the statutory mandate is not necessary. C. What are the Economic Impacts of the ECA? Based on the economic analysis conducted for the ECA, the Agency expects the cost of the testing to be performed under this ECA to range from $100,000 to $150,000. This estimate is based on a contact report of an inquiry directed to a university laboratory conducting thermal ‘‘burn’’ test research. The estimated total cost for industry to conduct the required testing under the ECA is $150,000, which is the upper end of the estimated cost range. EPA anticipates that the costs for testing under this ECA will have a low potential for adverse economic impact on the regulated community because the costs for testing will be shared across four companies who are signatories to the ECA and the Order that incorporates the ECA. Export regulations promulgated pursuant to section 12(b) of TSCA—40 CFR part 707, subpart D—require only a one-time notification to each foreign country of export for each chemical for which data are required under section 4 of TSCA. In an analysis of the economic impacts of the July 27, 1993, amendment to the rules implementing section 12(b) of TSCA (58 FR 40238), EPA estimated that the one-time cost of preparing and submitting the TSCA section 12(b) notification for a first-time submitter of any TSCA section12(b) notification was $62.60 (Ref. 13). When inflated from 1992 to 2004 dollars (4thQ) by a factor of 1.538 using the E:\FR\FM\08JYR4.SGM 08JYR4 39628 Federal Register / Vol. 70, No. 130 / Friday, July 8, 2005 / Rules and Regulations Employment Cost Index for White Collar Occupations (Ref. 14), the current cost is estimated to be $96.12, or a burden of 1.5 hours, for a first-time submitter. An exporter who had previously submitted a 12(b) notification for any chemical/country combination would incur an estimated cost of $31.72 for preparing and submitting a TSCA section 12(b) notification, based on the burden estimate of .5 hours. V. References 1. U.S. Environmental Protection Agency (EPA). Charles M. Auer. Memorandum to Oscar Hernandez, Mary Ellen Weber, and Ward Penberthy regarding revision of PFOA Hazard Assessment and Next Steps. September 27, 2002. Available from the EPA Administrative Record as AR 226–1127. 2. EPA. Draft Risk Assessment of the Potential Human Health Effects Associated with the Exposure to Perfluorooctanoic Acid and its Salts. January 4, 2005. pp. 117. Available from EPA website, https://www.epa.gov/oppt/ pfoa/. 3. EPA. Science Advisory Board (SAB) Staff Office. Notification of Upcoming Meetings of the Science Advisory Board Perfluorooctanoic Acid Risk Assessment (PFOA) Review Panel. Federal Register (70 FR 2157–2158, January 12, 2005) (FRL–7860–5). 4. 3M Company, Dr. Larry Wending. Letter of Intent to Stephen L. Johnson, EPA, to continue ongoing environmental, health, and safety measures by Company relating to Perfluorooctanoic Acid and its Salts (PFOA). March 13, 2003. Available from EPA EDOCKET as OPPT–2003–0012– 0007. 5. The Society of the Plastics Industry, Inc., Donald K. Duncan. The Ammonium Perfluorooctanoate (APFO) Users. Letters of Intent to Stephen L. Johnson, EPA, regarding responsive Voluntary Actions by parties to evaluate and control emissions of Ammonium Perfluorooctanoate (APFO). March 14, 2003. Available from EPA EDOCKET as OPPT–2003–0012–0012. 6. Telomer Research Program (TRP) Member Companies. Letter of Intent to Stephen L. Johnson, EPA, regarding addressing concerns raised by EPA about the possible association of Perfluoroctanoic Acid (PFOA) with telomer-based products. March 14, 2003. Available from EPA EDOCKET as OPPT–2003–0012–0013. 7. APFO Users, Telomer Companies, and The 3M Company. Letter of Intent to Stephen L. Johnson, EPA, regarding commitment by Companies to assist the Environmental Protection Agency (EPA) VerDate jul<14>2003 16:55 Jul 07, 2005 Jkt 205001 in its investigation of Perfluorooctanoic Acid (PFOA) and Ammonium Perfluorooctanoate (APFO). March 31, 2003. Available from EPA EDOCKET as OPPT–2003–0012–0016. 8. EPA. Preliminary Framework for Enforceable Consent Agreement (ECA) Data Development for PFOA and Telomers. May 20, 2003. Available from EPA EDOCKET as OPPT–2003–0012– 0056. 9. Telomer Research Program. Incineration Research Approach. Presentation to the Telomer Technical Workgroup. July 10, 2003. p. 3. Available from EPA EDOCKET as OPPT–2003–0012–0147. 10. EPA. EPA ECA Proposal for Telomer Incineration Testing. Presentation to the Telomer Technical Workgroup. July 10, 2003. p. 2. Available from EPA EDOCKET as OPPT–2003–0012–0147. 11. EPA. PFOA ECA Telomer Technical Workgroup Meeting Summary. March 30, 2004. p. 8. Available from EPA EDOCKET as OPPT–2003–0012–0611. 12. EPA. Enforceable Consent Agreement Development for Perfluorooctanoic Acid (PFOA) and Fluorinated Telomers. Public Meeting Summary. April 1, 2004. p.6. Available from EPA EDOCKET as OPPT–2003– 0012–0613. 13. EPA. Economic Analysis in Support of the Final Rule Promulgated under TSCA Section 12(b). William Silagi. EPA/OPPT/RIB. Washington, DC. June 1992. 14. Bureau of Labor Statistics (BLS). 2003. Employment Cost Index, Total Compensation: White-Collar Occupations (Series ID: ECS11102I). https://data.bls.gov/cgi-bin/srgate. Extracted February 9, 2005. 15. EPA. Wendy Hoffman. Memorandum to Richard Leukroth regarding calculation of Paperwork Reduction Act burden estimate for the incineration ECAs. October 20, 2004. Available from EPA EDOCKET as OPPT–2004–0001–0007. 16. EPA. Lynne Blake-Hedges. Memorandum to EPAB Staff on Unit Burden Estimates for 12(b) Export Notification for Section 4 Test Rules and Enforceable Consent Agreements (ECAs). July 20, 1999. 17. ASTM. Standard Test Method for Loss-On Drying by Thermogravimetry. 2002 Annual Book of ASTM Standards. Volume 14.02, Designated E 1868–02. pp. 635–638. August 10, 2002. PO 00000 Frm 00006 Fmt 4701 Sfmt 4700 VI. Statutory and Executive Order Reviews A. Executive Order 12866 This action announces an Order that incorporates an ECA between EPA and the Companies. Under Executive Order 12866, entitled Regulatory Planning and Review (58 FR 51735, October 4, 1993), this action is not a ‘‘regulatory action’’ subject to review by the Office of Management and Budget (OMB). B. Paperwork Reduction Act According to the Paperwork Reduction Act (PRA), 44 U.S.C. 3501 et seq., an agency may not conduct or sponsor, and a person is not required to respond to, an information collection request unless it displays a currently valid control number assigned by OMB. The OMB control numbers for the EPA’s regulations in title 40 of the CFR are listed in 40 CFR part 9. The information collection requirements related to the Order that incorporates the ECA have already been approved by OMB pursuant to the PRA under OMB control number 2070–0033 (EPA ICR No. 1139). The one-time public burden for this collection of information is estimated to be approximately 216.5 hours per response (i.e., per company), or 866 hours total burden for the four companies (Ref. 15). Under the PRA, ‘‘burden’’ means the total time, effort, or financial resources expended by persons to generate, maintain, retain, or disclose or provide information to or for a Federal Agency. For this collection, it includes the time needed to review instructions; complete and review the collection of information; and transmit or otherwise disclose the information. The information collection requirements related to export notification requirements under section 12(b) of TSCA, including those related to the ECA and the Order that incorporates the ECA, have already been approved by OMB pursuant to PRA under OMB control number 2070–0030 (EPA ICR No. 0795). The public reporting burden for this information collection is estimated to be between .5 hours to 1.5 hours per response. The lower estimate applies to companies that have previously submitted a TSCA section 12(b) notification for any chemical or mixture, and therefore need only update an existing form letter assumed to have been generated electronically. The higher estimate applies to companies that are first-time submitters of a TSCA section 12(b) notification (Ref. 16), and therefore need to write an initial letter. E:\FR\FM\08JYR4.SGM 08JYR4 39629 Federal Register / Vol. 70, No. 130 / Friday, July 8, 2005 / Rules and Regulations C. Regulatory Flexibility Act Since the issuance of the ECA and the Order that incorporates the ECA, as well as the applicability of the export notification requirements of TSCA section 12(b) to chemicals addressed in the ECA and the Order that incorporates the ECA, do not require the issuance of a proposed rule, the requirements of the Regulatory Flexibility Act (RFA) (5 U.S.C. 601 et seq.) do not apply. D. Unfunded Mandates Reform Act This action does not impose any enforceable duty or contain any unfunded mandate as described under Title II of the Unfunded Mandates Reform Act of 1995 (UMRA), Public Law 104–4. Therefore, this action is not subject to the requirements of UMRA. E. Executive Order 13132 and 13175 This action is not expected to impact State or Tribal governments because these governments are not expected to export the chemicals covered by the ECA or the Order that incorporates the ECA. As such, the Agency has determined that this action will not have a substantial direct effect on States, on the relationship between the national government and the States, or on the distribution of power and responsibilities among the various levels of government, as specified in Executive Order 13132, entitled Federalism (64 FR 43255, August 10, 1999) nor will this action have Tribal implications because it does not significantly or uniquely affect the communities of Indian Tribal governments, or involve or impose any requirements that affect Indian Tribes. Accordingly, the requirements of Executive Order 13175, entitled Consultation and Coordination with Indian Tribal Governments (65 FR 67249, November 6, 2000), do not apply. F. Executive Order 13045 Executive Order 13045, entitled Protection of Children from Environmental Health Risks and Safety Risks (62 FR 1985, April 23, 1997), does not apply to this action because this action is not designated as an ‘‘economically significant’’ regulatory action as defined by Executive Order 12866 (see Unit VI.A.), nor does this action establish an environmental standard that is intended to have a disproportionate effect on children. To the contrary, this action will provide data and information that EPA and others can use to assess the risks of these chemicals, including potential risks to sensitive subpopulations. G. Executive Order 13211 This action is not subject to Executive Order 13211, entitled Actions Concerning Regulations That Significantly Affect Energy Supply, Distribution, or Use (66 FR 28355, May 22, 2001), because this action is not expected to affect energy supply, distribution, or use. Guideline No. (Year) Guideline name ASTM E 1868–02 (August 10, 2002) List of Subjects in Part 799 Environmental protection, Chemicals, Exports, Hazardous substances, Health, None Authority: 15 U.S.C. 2603, 2611, 2625. Laboratories, Reporting and recordkeeping requirements. Jkt 205001 Therefore, 40 CFR Chapter I is amended as follows: I § 799.5025 Testing consent orders for mixtures without Chemical Abstracts Service Registry Numbers. PART 799—[AMENDED] 1. The authority citation for part 799 continues to read as follows: I PO 00000 Frm 00007 2. Section 799.5025 is amended by revising the heading of the first column of the table as set forth below and by adding the following entry to the table in alphabetical order, to read as follows: I Dated: June 28, 2005. Margaret Schneider, Acting Assistant Administrator, Office of Prevention, Pesticides and Toxic Substances. * * * * Required test * * * * * Fluorotelomer-based composite substance: (1) For Paper containing three of the following chemical substances as specified in the ECA: (i) Perfluoroalkylethyl acrylate copolymer, EPA-designated accession number (ACC) 171790 (ii) Perfluoroalkyl acrylate copolymer, ACC 158022 16:55 Jul 07, 2005 OECD Guideline No. None Mixture/substance VerDate jul<14>2003 Section 12(d) of the National Technology Transfer and Advancement Act of 1995 (NTTAA), Public Law 104– 113 section 12(d) (15 U.S.C. 272 note) directs EPA to use voluntary consensus standards in its regulatory activities unless to do so would be inconsistent with applicable law or otherwise impractical. Voluntary consensus standards are technical standards (e.g., materials specifications, test methods, sampling procedures, and business practices) that are developed or adopted by voluntary consensus standards bodies. The NTTAA directs EPA to provide Congress, through OMB, explanations when the Agency decides not to use available and applicable voluntary consensus standards. The testing conducted under the ECA involves technical standards. The Agency conducted a search to identify potentially applicable voluntary consensus standards. No such standard was identified for incineration testing of FTBP chemicals that are the subject of the ECA. However, EPA identified a voluntary consensus standard for thermogravimetric analysis (Ref. 17) which is a required element of the Phase II ECA testing. Appendix B.1 of the ECA describes specific modifications to this voluntary consensus standard that are needed to take into consideration the unique properties of FTBP chemicals. TSCA Guideline No. Standard Test Method for Loss-OnDrying by Thermogravimetry I. Executive Order 12898 This action does not entail special considerations of environmental justice related issues as delineated by Executive Order 12898, entitled Federal Actions to Address Environmental Justice in Minority Populations and Low-Income Populations (59 FR 7629, February 16, 1994). H. National Technology Transfer Advancement Act Fmt 4701 Sfmt 4700 * * FR citation * Environmental effects. July 8, 2005. ......do ............................... Do. E:\FR\FM\08JYR4.SGM 08JYR4 39630 Federal Register / Vol. 70, No. 130 / Friday, July 8, 2005 / Rules and Regulations Mixture/substance Required test (iii) Perfluoroalkyl methacrylate polymer, EPA document control number (DCN) 63040000037A (iv) Substituted methacrylate, propenoic acid, perfluoroalkyl esters, DCN 63040000033B (v) Perfluoroalkyl acrylic polymer, DCN 63040000037C (vi) Poly-.beta.-fluoroalkylethyl acrylate and alkyl acrylate, ACC 174993 (vii) Poly(.beta.-fluoroalkylethyl acrylate and alkyl acrylate), ACC 70430 (viii) Polysubstituted acrylic copolymer, ACC 157381 (ix) Perfluoroalkyl acrylate copolymer latex, ACC No. 70907 (2) For Textile containing six of the following chemical substances as specified in the ECA: (i) Perfluoroalkylethyl acrylate copolymer, EPA-designated accession number (ACC) 171790 (ii) Perfluoroalkyl acrylate copolymer, ACC 158022 (iii) Perfluoroalkyl methacrylate polymer, EPA document control number (DCN) 63040000037A (iv) Substituted methacrylate, propenoic acid, perfluoroalkyl esters, DCN 63040000033B (v) Perfluoroalkyl acrylic polymer, DCN 63040000037C (vi) Poly-.beta.-fluoroalkylethyl acrylate and alkyl acrylate, ACC 174993 (vii) Poly(.beta.-fluoroalkylethyl acrylate and alkyl acrylate), ACC 70430 (viii) Polysubstituted acrylic copolymer, ACC 157381 (ix) Perfluoroalkyl acrylate copolymer latex, ACC 70907 [FR Doc. 05–13492 Filed 7–7–05; 8:45 am] BILLING CODE 6560–50–S ENVIRONMENTAL PROTECTION AGENCY 40 CFR Part 799 [OPPT–2003–0071; FRL–7710–5] Final Enforceable Consent Agreement and Testing Consent Order for Four Formulated Composites of Fluoropolymer Chemicals; Export Notification Environmental Protection Agency (EPA). ACTION: Notice of final consent agreement and order. AGENCY: SUMMARY: Under section 4 of the Toxic Substances Control Act (TSCA), EPA has issued a testing consent order (Order) that incorporates an enforceable consent agreement (ECA) with AGC Chemicals Americas, Inc.; Daikin America, Inc.; Dyneon, LLC; and E.I. du Pont de Nemours and Company (the Companies). The Companies have agreed to perform incineration testing of four formulated composites of fluoropolymer (FP) chemicals representative of products currently available in the marketplace. This document announces the ECA and the Order that incorporates the ECA for this testing, and summarizes the terms of the ECA. As a result of the ECA and Order that incorporates the ECA, exporters of any of the formulated composites containing FP chemicals, including persons who do not sign the ECA, are subject to export notification VerDate jul<14>2003 16:55 Jul 07, 2005 Jkt 205001 ......do ............................... Do. ......do ............................... Do. ......do ......do ......do ......do ......do ............................... ............................... ............................... ............................... ............................... Do. Do. Do. Do. Do. ......do ............................... Do. ......do ............................... ......do ............................... Do. Do. ......do ............................... Do. ......do ......do ......do ......do ......do Do. Do. Do. Do. Do. requirements under section 12(b) of TSCA. This document adds the four formulated composites of FP chemicals to the table of testing consent orders for substances and mixtures without Chemical Abstract Service (CAS) Registry Numbers. Data developed from the ECA testing will contribute to the Agency’s efforts to determine whether municipal and/or medical waste incineration of FPs is a potential source and/or pathway of environmental and human exposure to perfluorooctanoic acid (PFOA). The data will also contribute to the Agency’s continuing efforts to achieve healthy communities and ecosystems. DATES: The effective date of the ECA, the Order that incorporates the ECA, and this action is July 8, 2005. ADDRESSES: EPA has established a docket for this action under docket identification (ID) number OPPT–2003– 0071. All documents in the docket are listed in the EDOCKET index at http:/ /www.epa.gov/edocket/. Although listed in the index, some information is not publicly available, i.e., Confidential Business Information (CBI) or other information whose disclosure is restricted by statute. Certain other material, such as copyrighted material, will not be placed on the Internet and will be publicly available only in hard copy form. Publicly available docket materials are available either electronically in EDOCKET or in hard copy at the OPPT Docket, EPA Docket Center, EPA West, Room B102, 1301 Constitution Ave., NW., Washington, DC. The Public Reading Room is open from 8:30 a.m. to 4:30 p.m., Monday through Friday, excluding legal PO 00000 Frm 00008 Fmt 4701 Sfmt 4700 FR citation ............................... ............................... ............................... ............................... ............................... holidays. The EPA Docket Center Reading Room telephone number is (202) 566–1744 and the telephone number for the OPPT Docket, which is located in EPA Docket Center, is (202) 566–0280. FOR FURTHER INFORMATION CONTACT: For general information contact: Colby Lintner, Regulatory Coordinator, Environmental Assistance Division (7408M); telephone number: (202) 554– 1404; e-mail address: TSCAHotline@epa.gov. For information on the ECA, contact: Richard W. Leukroth, Jr., Chemical Control Division (7405M); telephone number: (202) 564–8167; fax number: (202) 564–4765; e-mail address: leukroth.rich@epa.gov. For technical information on testing and availability of ECA test data, contact: John Blouin, Economics, Exposure and Technology Division (7406M); telephone number: (202) 564– 8519; fax number: (202) 564–8528; email address: blouin.john@epa.gov. For technical information on export notification, contact: Richard W. Leukroth, Jr., Chemical Control Division (7405M); telephone number: (202) 564– 8167; fax number: (202) 564–4765; email address: leukroth.rich@epa.gov or Laura L. Bunte, Chemical Control Division (7405M); telephone number: (202) 564–8087; fax number: (202) 564– 4765; e-mail address: bunte.laura@epa.gov. To contact any of these individuals by mail, identify the individual by name and Division indicated for that person, and use this address: Office of Pollution Prevention and Toxics (OPPT), Environmental Protection Agency, 1200 E:\FR\FM\08JYR4.SGM 08JYR4

Agencies

ENVIRONMENTAL PROTECTION AGENCY

[Federal Register Volume 70, Number 130 (Friday, July 8, 2005)]
[Rules and Regulations]
[Pages 39624-39630]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 05-13492]

[[Page 39623]]

-----------------------------------------------------------------------

Part IV

Environmental Protection Agency

-----------------------------------------------------------------------

40 CFR Part 799

Final Enforceable Consent Agreement and Testing Consent Orders; Two
Formulated Composites of Fluorotelomer-based Polymer Chemicals; Four
Formulated Composites of Fluoropolymer Chemicals; Export Notifications;
Final Rules

Federal Register / Vol. 70, No. 130 / Friday, July 8, 2005 / Rules
and Regulations

[[Page 39624]]

-----------------------------------------------------------------------

ENVIRONMENTAL PROTECTION AGENCY

40 CFR Part 799

[OPPT-2004-0001; FRL-7710-4]

Final Enforceable Consent Agreement and Testing Consent Order for
Two Formulated Composites of Fluorotelomer-based Polymer Chemicals;
Export Notification

AGENCY: Environmental Protection Agency (EPA).

ACTION: Notice of final consent agreement and order.

-----------------------------------------------------------------------

SUMMARY: Under section 4 of the Toxic Substances Control Act (TSCA),
EPA has issued a testing consent order (Order) that incorporates an
enforceable consent agreement (ECA) with AGC Chemicals Americas, Inc.;
Clariant GmbH; Daikin America, Inc.; and E.I. du Pont de Nemours and
Company (the Companies). The Companies have agreed to perform
incineration testing of two formulated composites of fluorotelomer-
based polymer (FTBP) chemicals representative of chemicals applied to
textile and paper products. This document announces the ECA and the
Order that incorporates the ECA for this testing, and summarizes the
terms of the ECA. As a result of the ECA and Order that incorporates
the ECA, exporters of either of the formulated composites containing
FTBP chemicals, including persons who do not sign the ECA, are subject
to export notification requirements under section 12(b) of TSCA. This
document adds the two formulated composites of FTBP chemicals to the
table of testing consent orders for substances and mixtures without
Chemical Abstract Service (CAS) Registry Numbers. Data developed from
the ECA testing will contribute to the Agency's efforts to determine
whether municipal and/or medical waste incineration of FTBPs is a
potential source and/or pathway of environmental and human exposure to
perfluorooctanoic acid (PFOA). The data will also contribute to the
Agency's continuing efforts to achieve healthy communities and
ecosystems.

DATES: The effective date of the ECA, the Order that incorporates the
ECA, and this action is July 8, 2005.

ADDRESSES: EPA has established a docket for this action under docket
identification (ID) number OPPT-2004-0001. All documents in the docket
are listed in the EDOCKET index at https://www.epa.gov/edocket/.
Although listed in the index, some information is not publicly
available, i.e., Confidential Business Information (CBI) or other
information whose disclosure is restricted by statute. Certain other
material, such as copyrighted material, will not be placed on the
Internet and will be publicly available only in hard copy form.
Publicly available docket materials are available either electronically
in EDOCKET or in hard copy at the OPPT Docket, EPA Docket Center, EPA
West, Room B102, 1301 Constitution Ave., NW., Washington, DC. The
Public Reading Room is open from 8:30 a.m. to 4:30 p.m., Monday through
Friday, excluding legal holidays. The EPA Docket Center Reading Room
telephone number is (202) 566-1744 and the telephone number for the
OPPT Docket, which is located in EPA Docket Center, is (202) 566-0280.

FOR FURTHER INFORMATION CONTACT: For general information contact: Colby
Lintner, Regulatory Coordinator, Environmental Assistance Division
(7408M); telephone number: (202) 554-1404; e-mail address: TSCA-
Hotline@epa.gov.
For information on the ECA, contact: Richard W. Leukroth, Jr.,
Chemical Control Division (7405M); telephone number: (202) 564-8167;
fax number: (202) 564-4765; e-mail address: leukroth.rich@epa.gov.
For technical information on testing and availability of ECA test
data, contact: John Blouin, Economics, Exposure and Technology Division
(7406M); telephone number: (202) 564-8519; fax number: (202) 564-8528;
e-mail address: blouin.john@epa.gov.
For technical information on export notification, contact: Richard
W. Leukroth, Jr., Chemical Control Division (7405M); telephone number:
(202) 564-8167; fax number: (202) 564-4765; e-mail address:
leukroth.rich@epa.gov or Laura L. Bunte, Chemical Control Division
(7405M); telephone number: (202) 564-8087; fax number: (202) 564-4765;
e-mail address: bunte.laura@epa.gov.
To contact any of these individuals by mail, identify the
individual by name and Division indicated for that person, and use this
address: Office of Pollution Prevention and Toxics (OPPT),
Environmental Protection Agency, 1200 Pennsylvania Ave., NW.,
Washington, DC 20460-0001.

SUPPLEMENTARY INFORMATION:

I. General Information

A. Does this Action Apply to Me?

This action is directed to the public in general. The requirements
in the ECA and the Order that incorporates the ECA only apply to those
companies that are specifically named in the ECA. As of July 8, 2005,
any person who exports or intends to export either of the two
formulated composites of FTBP chemicals that are the subject of the ECA
and the Order that incorporates the ECA are subject to the export
notification requirements of TSCA section 12(b) (see 40 CFR part 707,
subpart D, and Unit IV.B.). Although other types of entities could also
be affected, most chemical manufacturers are usually identified under
North American Industrial Classification System (NAICS) code 325. If
you have any questions regarding the applicability of this action to a
particular entity, contact persons listed under FOR FURTHER INFORMATION
CONTACT.

B. How Can I Access Electronic Copies of this Document and Other
Related Information?

In addition to using EDOCKET (https://www.epa.gov/edocket/), you may
access this Federal Register document electronically through the EPA
Internet under the ``Federal Register'' listings at https://www.epa.gov/
fedrgstr/. A frequently updated electronic version of 40 CFR part 799
is available on E-CFR Beta Site Two at https://www.gpoaccess.gov/ecfr/.
Information on TSCA 12(b) export notification (40 CFR part 707) is
available at https://www.epa.gov/oppt/chemtest/sect12b.htm.

II. Background

A. What are FTBP Chemicals?

FTBP chemicals are polymers manufactured from a fluorinated
chemical intermediate via a telomerization process. Telomerization is
the reaction of a telogen (such as pentafluoroethyl iodide) with a
polymerizable compound (such as tetrafluoroethylene) to form a low
molecular weight polymer with few repeating units, known as
``telomers.''
FTBPs are the major chemical constituents of telomer-based
polymeric products (TBPPs), which are used in many industrial and
consumer products. TBPPs are applied as soil, stain, and water
resistant coatings to textiles, carpet, leather, stone and tile
products; as grease, oil and water resistant coatings on paper
products; and, as surfactants and intermediates.

B. Why Does EPA Need Environmental Effects Data on FTBP Chemicals?

EPA has identified potential human health concerns from exposure to
PFOA and its salts. The Agency is concerned that fluorinated telomers
used to

[[Page 39625]]

manufacture FTBPs may be a source and/or pathway to environmental and
human exposure to PFOA because FTBP chemicals may metabolize or degrade
to PFOA by mechanisms that are not fully understood at this time. EPA
believes that the nine individual FTBPs (see Unit III.B.) with their
associated chemistries, particularly the bond strength of the common C-
F bonds, are representative of the manner in which FTBPs will degrade,
potentially forming PFOA when incinerated under the conditions
simulated by this ECA testing program. The F-(CF2)x- and -(CF2-CF2)x-
moieties are common to the individual FTBPs, and the two formulated
composites of FTBP chemicals that are the subject of the ECA and the
Order that incorporates the ECA are representative of the individual
fluorotelomer components and the remaining non-component FTBPs, for all
FTBPs used in commerce.
In September 2002, EPA's OPPT initiated a priority review of PFOA
because developmental toxicity, carcinogenicity, and blood-monitoring
data presented in an interim revised hazard assessment raised the
possibility that PFOA might present a significant risk to human health
(Ref. 1). On January 4, 2005, OPPT's Risk Assessment Division submitted
a draft risk assessment of the potential human health effects
associated with exposure to PFOA and its salts to EPA's Science
Advisory Board's (SAB) Perfluorooctanoic Acid Risk Assessment Review
Panel for peer review (Refs. 2 and 3). These assessments revealed
uncertainties associated with the sources and pathways of human
exposure. EPA believes that the information to be developed under the
ECA testing will better inform the Agency regarding the potential
source(s) and/or pathway(s) of environmental and human exposure to
PFOA.

III. ECA Development and Conclusion

A. How is EPA Going to Obtain Environmental Testing on FTBP Chemicals?

In the Federal Register of April 16, 2003 (68 FR 18626) (FRL-7303-
8), EPA initiated a public process to negotiate ECAs concerning PFOA
and fluorinated telomers. The two goals of the ECAs resulting from
these public discussions are to develop environmental fate and
transport data, as well as other data relevant to identifying the
pathway(s) that result in human exposure to PFOA by air, water, or
soil; and, to characterize how PFOA gets into those pathways, including
the products or processes that are responsible for the presence of PFOA
in the environment. EPA anticipates that the data to be developed under
such ECAs will be supplemental to data being generated by ongoing
testing efforts described under industry letters of intent (LOIs)
(Refs. 4-7).
In preparation for the initial public meeting on June 6, 2003, EPA
developed a preliminary framework document (Ref. 8) outlining Agency
data needs that address the outstanding PFOA source and exposure
pathway questions identified in the Federal Register notice of April
16, 2003. EPA's preliminary framework document was intended to serve as
a discussion guide for the June 6, 2003, public meeting and to aid in
distinguishing between outstanding EPA data needs and industry LOI
commitments. The preliminary framework document was not a predetermined
list of information needs defining the outcome of the ECA process.
The ECA described in this document provides for a laboratory-scale
incineration testing program for two formulated composites of FTBP
chemicals. Incineration testing of FTBPs is one of the data needs
identified in EPA's preliminary framework document for PFOA. On June 6,
2003, the PFOA Plenary Group (consisting of EPA and all parties who had
identified themselves as being interested in the ECA development
proceedings after publication of the April 16, 2003 Federal Register
notice) acknowledged that such a testing program was an opportunity for
ECA development. The PFOA Plenary Group tasked the Telomer Technical
Workgroup (a subgroup of the PFOA Plenary Group) with working out the
details that could be incorporated into an ECA between the Companies
and EPA.
On July 9, 2003, the Telomer Technical Workgroup received proposals
from the Companies and EPA (Refs. 9 and 10) for incineration testing of
FTBPs. Details of the testing program were then developed by members of
the Telomer Incineration Subgroup (a subgroup of the Telomer Technical
Workgroup) and the subgroup and workgroup reached consensus on the
testing to be required under the ECA. On March 30, 2004, the Telomer
Technical Workgroup acknowledged that this testing program had
sufficient merit for consideration by the PFOA Plenary Group (Ref. 11).
On April 1, 2004, the PFOA Plenary Group discussed the merit of this
testing program and recommended that EPA consider entering into an ECA
with the Companies (Ref. 12). EPA agreed and initiated steps to enter
into this ECA with the Companies. On February 8, 2005, EPA received the
ECA signed by the Companies, and on June 28, 2005, EPA signed the ECA
and the Order that incorporates the ECA. The effective date of the ECA
and the Order that incorporates the ECA is July 8, 2005.
EPA uses ECAs to accomplish testing of chemicals for health and
environmental effects where a consensus exists concerning the need for
and scope of testing (40 CFR 790.1(c)). The procedures for ECA
negotiations and the factors for determining whether a consensus exists
are described at 40 CFR 790.22 and 790.24, respectively.

B. What is the Subject of the ECA and Order Incorporating the ECA?

As specified under the ECA, two formulated composites of FTBP
chemicals are the subject of and will be tested under the ECA and the
Order that incorporates the ECA. Appendix A and Part XXIV. (individual
company signature pages) of the ECA provide details on: The rationale
for formulating two composites that represent TBPP chemicals
specifically applied to textile and/or paper products, the identity of
the FTBP chemicals used to formulate each composite, the procedures for
formulating each composite, and the procedures by which each company
will contribute the FTBP chemical(s) for which it is obligated under
the terms of the ECA. The paper composite will contain three FTBP
chemicals as specified in Appendix A and Part XXIV. of the ECA. The
textile composite will contain six FTBP chemicals as specified in
Appendix A and Part XXIV. of the ECA. The nine FTBP chemicals to be
formulated into the paper and textile composites that are subject to
the ECA and the Order that incorporates the ECA are identified as:
Perfluoroalkylethyl acrylate copolymer, EPA-designated accession number
(ACC) 171790; perfluoroalkyl acrylate copolymer, ACC 158022;
perfluoroalkyl methacrylate polymer, document control number (DCN)
63040000037A; substituted methacrylate, propenoic acid, perfluoroalkyl
esters, DCN 63040000033B; perfluoroalkyl acrylic polymer, DCN
63040000037C; poly-.beta.-fluoroalkylethyl acrylate and alkyl acrylate,
ACC 174993; poly(.beta.-fluoroalkylethyl acrylate and alkyl acrylate),
ACC 70430; polysubstituted acrylic copolymer, ACC 157381; and
perfluoroalkyl acrylate copolymer latex, ACC 70907. EPA cannot publicly
identify the content of the paper and textile composites with any
greater degree of specificity, given the need to protect the Companies'
CBI.

[[Page 39626]]

EPA uses a variety of numerical identification systems for tracking
chemicals. These include CAS numbers assigned to non-confidential
chemicals, premanufacture notice (PMN) numbers assigned by EPA when
chemicals enter EPA's new chemical review process, document control
numbers (DCN) assigned by the EPA OPPT's Confidential Business
Information Center for EPA tracking, and Accession (ACC) numbers
provided by EPA when a chemical identity listed on the TSCA Inventory
has been claimed as TSCA CBI. In addition, chemicals that qualify for a
reporting exemption under the Polymer Exemption Rule (40 CFR 723.250)
may have a commercial trade identity or an IES Method I (CAS Inventory
Expert Service) name assigned.

C. What Testing Does the ECA for FTBP Chemicals Require?

The ECA for laboratory-scale incineration testing of two composites
of FTBP chemicals requires environmental testing, as described in Table
1 of this unit, which sets forth the required testing, test standards,
and reporting requirements for testing to be conducted under the ECA.
The testing included in the ECA will be conducted in two segments,
as follows: Phase I--PFOA Transport Testing (Phase I) and Phase II--
Fluorotelomer Incineration Testing (Phase II). Phase I will consist of
quantitative transport efficiency testing for PFOA. At the conclusion
of Phase I, the Companies will provide EPA with a letter report
summarizing the results. In the event that the transport efficiency of
PFOA or total fluorine is equal to or greater than 70%, testing will
proceed to Phase II. In the event that the transport efficiency of PFOA
and total fluorine are both individually less than 70%, the Companies
will initiate a technical consultation with EPA to reach agreement on
how to proceed. The various outcomes of such a technical consultation
are laid out in Part VIII. of the ECA.
Under Phase II, elemental analysis, combustion stoichiometry,
thermogravimetric analysis, laboratory-scale combustion testing, and,
if required under the ECA (see Table 1, footnote 9 of this unit),
release assessment reporting will be performed for the two composites
of FTBP chemicals that are the subject of the ECA.

Table 1.--Required Testing, Test Standards, Reporting Requirements:
Phases of the Testing Program for the Incineration of FTBP Composites
------------------------------------------------------------------------

------------------------------------------------------------------------
Phase I
------------------------------------------------------------------------
PFOA Transport Testing Testing Standard/ Deadline \1\
Reporting (Days)
requirements
--------------------------------
Phase I Study Plan(s) 40 CFR 790.62(b) as 60 \ 3\
annotated by Part
X. of the ECA
--------------------------------
Phase I Quality Assurance EPA Requirements 90 \3\
Project Plan(s) for Quality
Assurance Project
Plans (QA/R5) \10\
--------------------------------
Quantitative PFOA transport Appendix C.1. of 240 \4,5\
testing \2\ the ECA
--------------------------------
Phase II
------------------------------------------------------------------------
Fluorotelomer Incineration Test Standard/ Deadline \1\
Testing Reporting (Days)
requirements
--------------------------------
Phase II Study Plan(s) 40 CFR 790.62(b) as 60 \3\
annotated by Part
X. of the ECA
--------------------------------
Phase II Quality Assurance EPA Requirements 180 \3\
Project Plan(s) for Quality
Assurance Project
Plans (QA/R5) \10\
--------------------------------
Receipt of composite components Part XXIV. and 90 \7\
by designated facility(ies) Appendix A.3. of
the ECA
--------------------------------
Elemental Analysis \6\ Appendix C.2.1. of 720 \8\
the ECA
--------------------------------
Combustion Stoichiometry \6\ Appendix C.2.2. of 720 \8\
the ECA
--------------------------------
Thermogravimetric Analysis \6\ ASTM E1868-02, as 720 \8\
modified in
Appendix B.1. of
the ECA
--------------------------------
Laboratory-scale Combustion Appendices C.2.4. 720 \8\
Testing \6\ and C.2.5., as
annotated/
supplemented by
Appendices D.1.,
D.2., D.3., and
D.4. of the ECA
--------------------------------
Release Assessment Report Appendix E.2. of 720 \9\
the ECA
------------------------------------------------------------------------
\1\ Number of days, starting with the day following the event starting
the time period in question. Interim progress reports must be
submitted by the Companies to EPA every 180 days beginning 180 days
from July 8, 2005, until the end of the ECA testing program (see Part
XIV. and Appendix E.1. of the ECA).
\2\ At the conclusion of Phase I, and prior to initiation of Phase II,
the Companies will provide a letter report to EPA summarizing the
results of Phase I testing (see Part VII.A. of the ECA). In the event
that the transport efficiency of PFOA or of total fluorine (as
determined by the formulas in Appendix C.1. of the ECA) is greater
than or equal to 70%, then the Companies will proceed to Phase II. In
the event that the transport efficiency of PFOA and of total fluorine
(as determined by the formulas in Appendix C.1. of the ECA) are both
individually less than 70% then the Companies will initiate a
Technical Consultation with EPA. The outcomes of the Technical
Consultation are described in Part VIII. of the ECA.
\3\ Number of days after July 8, 2005, when submission is due.
\4\ Number of days after EPA approval of the Study Plan(s) and QAPP(s)
for Phase I testing when a letter report describing transport
efficiency test result(s) and any contingency testing performed is due
to EPA (see Part VII.A. and Appendix C.1.3. of the ECA). If the Study
Plan(s) and QAPP(s) are not approved by EPA within 60 days of
submission of the Phase I QAPP(s), then this deadline is extended by
180 days to accommodate re-scheduling with the thermal reactor system
laboratory.
\5\ The final report for Phase I will be submitted to EPA within 60 days
of the completion of the Technical Consultation if the consultation
does not result in an agreement to conduct further testing. If the
Technical Consultation results in an agreement to conduct further
testing, the final report for Phase I will be included in the final
report for such further testing, unless agreed otherwise in the
Technical Consultation (see Part VIII. of the ECA).
\6\ The results of this testing will be provided in the final report for
Phase II (see Appendix C.2.5. and Appendix E.3. of the ECA).

[[Page 39627]]

\7\ Number of days from the submission of the Phase I letter report
signifying that Phase II can proceed and the approval by EPA of the
Phase II QAPP(s) that the Companies must meet their individual
obligations to provide the designated facility(ies) with the
components for each composite to be tested under the ECA (see Part
III.B. of the ECA). If Phase II is required by Technical Consultation
agreement (see footnote 2 of this table), the deadline shall be as
agreed in the Technical Consultation.
\8\ Number of days from the submission of a Phase I letter report
signifying that Phase II testing can proceed, and the approval of
Study Plan(s) and QAPP(s) for the Phase II testing when the report is
due, if all components of each composite are received, or EPA
determines that testing shall proceed with a partial composite(s) (see
Part III.B. of this ECA). If the study plan(s) and QAPP(s) are not
approved within 60 days of submission of the Phase II QAPP(s), then
this deadline is extended by 180 days to accommodate re-scheduling
with the thermal reactor system laboratory. If Phase II testing is
required by Technical Consultation agreement (see footnote 2 of this
table), the deadline shall be as agreed in the Technical Consultation.
\9\ In the event that Phase II laboratory-scale incineration testing
identifies measurable levels of PFOA resulting from the incineration
testing for any or all of the fluorotelomer composites tested under
this ECA, as defined in Appendix C.2.5.5. of the ECA, the Companies
will prepare a Release Assessment Report to place in perspective the
relevance of such measurable levels in the laboratory-scale
incineration testing results with respect to full-scale municipal and/
or medical waste incinerator operations in the United States. If
required, the Release Assessment Report will be submitted in
conjunction with the Final Report for Phase II testing (see footnotes
6 and 8 of this table).
\10\ Guidance for developing Quality Assurance Project Plans can be
found in the EPA document EPA QA/R-5: EPA Requirements for Quality
Assurance Project Plans, prepared by: Office of Environmental
Information, EPA, March 2001. This is also available from the EPA
website at https://epa.gov/quality/qs-docs.

D. What are the Uses for the Test Data to be Developed Under the ECA?

EPA will use the data obtained from the testing to be conducted
under the ECA to assess the potential for waste incineration of FTBPs
to emit PFOA. This analysis will be based on quantitative determination
of potential exhaust-gas levels of PFOA that may emanate from
laboratory-scale combustion testing under conditions representative of
typical municipal and/or medical waste combustor operations in the
United States. The data could provide EPA with an understanding of
whether the incineration of FTBPs is a source and/or pathway for
environmental and human exposure to PFOA.
These data could also be used to inform screening level human and
environmental exposure assessments. In addition, the data could be used
by other Federal Agencies (e.g., the Agency for Toxic Substances and
Disease Registry (ATSDR), the National Institute for Occupational
Safety and Health (NIOSH), the Occupational Safety and Health
Administration (OSHA), the Consumer Product Safety Commission (CPSC),
and the Food and Drug Administration (FDA)) in assessing chemical risks
and in taking appropriate actions within their programs.

IV. Other Impacts of the ECA

A. What if EPA Should Require Additional Environmental Testing on FTBP
Chemicals?

If EPA decides in the future that it requires additional data on
FTBPs, the Agency would initiate a separate action.

B. How Does the Order Affect TSCA Export Notification?

As of the effective date of the ECA and the Order that incorporates
the ECA under TSCA section 4 (i.e., the date of publication of this
document in the Federal Register) any of the Companies, as well as any
other person, who exports or intends to export either of the two
formulated composites of FTBP chemicals that are the subject of this
ECA and Order that incorporates the ECA, in any form, are subject to
the export notification requirements of TSCA section 12(b). Procedures
related to export notification are described in 40 CFR part 707,
subpart D. EPA maintains lists of all chemical substances and mixtures
with CAS numbers (40 CFR 799.5000) and without CAS numbers (40 CFR
799.5025) that are subject to testing consent orders. This document
will add the two formulated composites of FTBP chemicals that are the
subject of this ECA and Order that incorporates the ECA to the list at
40 CFR 799.5025.
Notice and comment rulemaking is not needed to add these chemical
substances to the list at 40 CFR 799.5025 because the export
notification requirements are imposed by statute. Section 12(b) of TSCA
requires any person who exports or intends to export to a foreign
country a chemical substance or mixture for which the submission of
data is required under TSCA section 4 to submit a notification of the
export or intended export to EPA. An ECA is an action under TSCA
section 4 requiring the submission of data. 40 CFR 790.1. Accordingly,
EPA's ECA regulations require that each ECA contain a statement that
manufacturers or processors signing the ECA, as well as any other
person, shall comply with export notification requirements in TSCA
section 12(b). 40 CFR 790.60(a)(11). The two formulated composites of
FTBP chemicals identified in this document are subject to an Order
incorporating an ECA. EPA finds that notice and an opportunity for
comment is unnecessary to implement the export notification
requirements in TSCA section 12(b) for the reasons stated in this unit.
For chemical substances and mixtures subject to other Orders
incorporating ECAs that were issued in the past, EPA initiated separate
rulemakings to amend the lists at 40 CFR 799.5000 and 40 CFR 799.5025,
thereby affording the public a comment opportunity as well as notifying
the public of the existence of an ECA. EPA took this step to ensure
that those companies not a party to the ECA or Order noticed their need
to comply with TSCA section 12(b). However, EPA now believes that a
separate rulemaking or an opportunity to comment on the implementation
of the statutory mandate is not necessary.

C. What are the Economic Impacts of the ECA?

Based on the economic analysis conducted for the ECA, the Agency
expects the cost of the testing to be performed under this ECA to range
from $100,000 to $150,000. This estimate is based on a contact report
of an inquiry directed to a university laboratory conducting thermal
``burn'' test research. The estimated total cost for industry to
conduct the required testing under the ECA is $150,000, which is the
upper end of the estimated cost range. EPA anticipates that the costs
for testing under this ECA will have a low potential for adverse
economic impact on the regulated community because the costs for
testing will be shared across four companies who are signatories to the
ECA and the Order that incorporates the ECA.
Export regulations promulgated pursuant to section 12(b) of TSCA--
40 CFR part 707, subpart D--require only a one-time notification to
each foreign country of export for each chemical for which data are
required under section 4 of TSCA. In an analysis of the economic
impacts of the July 27, 1993, amendment to the rules implementing
section 12(b) of TSCA (58 FR 40238), EPA estimated that the one-time
cost of preparing and submitting the TSCA section 12(b) notification
for a first-time submitter of any TSCA section12(b) notification was
$62.60 (Ref. 13). When inflated from 1992 to 2004 dollars (4thQ) by a
factor of 1.538 using the

[[Page 39628]]

Employment Cost Index for White Collar Occupations (Ref. 14), the
current cost is estimated to be $96.12, or a burden of 1.5 hours, for a
first-time submitter. An exporter who had previously submitted a 12(b)
notification for any chemical/country combination would incur an
estimated cost of $31.72 for preparing and submitting a TSCA section
12(b) notification, based on the burden estimate of .5 hours.

V. References

1. U.S. Environmental Protection Agency (EPA). Charles M. Auer.
Memorandum to Oscar Hernandez, Mary Ellen Weber, and Ward Penberthy
regarding revision of PFOA Hazard Assessment and Next Steps. September
27, 2002. Available from the EPA Administrative Record as AR 226-1127.
2. EPA. Draft Risk Assessment of the Potential Human Health Effects
Associated with the Exposure to Perfluorooctanoic Acid and its Salts.
January 4, 2005. pp. 117. Available from EPA website, https://
www.epa.gov/oppt/pfoa/.
3. EPA. Science Advisory Board (SAB) Staff Office. Notification of
Upcoming Meetings of the Science Advisory Board Perfluorooctanoic Acid
Risk Assessment (PFOA) Review Panel. Federal Register (70 FR 2157-2158,
January 12, 2005) (FRL-7860-5).
4. 3M Company, Dr. Larry Wending. Letter of Intent to Stephen L.
Johnson, EPA, to continue ongoing environmental, health, and safety
measures by Company relating to Perfluorooctanoic Acid and its Salts
(PFOA). March 13, 2003. Available from EPA EDOCKET as OPPT-2003-0012-
0007.
5. The Society of the Plastics Industry, Inc., Donald K. Duncan.
The Ammonium Perfluorooctanoate (APFO) Users. Letters of Intent to
Stephen L. Johnson, EPA, regarding responsive Voluntary Actions by
parties to evaluate and control emissions of Ammonium
Perfluorooctanoate (APFO). March 14, 2003. Available from EPA EDOCKET
as OPPT-2003-0012-0012.
6. Telomer Research Program (TRP) Member Companies. Letter of
Intent to Stephen L. Johnson, EPA, regarding addressing concerns raised
by EPA about the possible association of Perfluoroctanoic Acid (PFOA)
with telomer-based products. March 14, 2003. Available from EPA EDOCKET
as OPPT-2003-0012-0013.
7. APFO Users, Telomer Companies, and The 3M Company. Letter of
Intent to Stephen L. Johnson, EPA, regarding commitment by Companies to
assist the Environmental Protection Agency (EPA) in its investigation
of Perfluorooctanoic Acid (PFOA) and Ammonium Perfluorooctanoate
(APFO). March 31, 2003. Available from EPA EDOCKET as OPPT-2003-0012-
0016.
8. EPA. Preliminary Framework for Enforceable Consent Agreement
(ECA) Data Development for PFOA and Telomers. May 20, 2003. Available
from EPA EDOCKET as OPPT-2003-0012-0056.
9. Telomer Research Program. Incineration Research Approach.
Presentation to the Telomer Technical Workgroup. July 10, 2003. p. 3.
Available from EPA EDOCKET as OPPT-2003-0012-0147.
10. EPA. EPA ECA Proposal for Telomer Incineration Testing.
Presentation to the Telomer Technical Workgroup. July 10, 2003. p. 2.
Available from EPA EDOCKET as OPPT-2003-0012-0147.
11. EPA. PFOA ECA Telomer Technical Workgroup Meeting Summary.
March 30, 2004. p. 8. Available from EPA EDOCKET as OPPT-2003-0012-
0611.
12. EPA. Enforceable Consent Agreement Development for
Perfluorooctanoic Acid (PFOA) and Fluorinated Telomers. Public Meeting
Summary. April 1, 2004. p.6. Available from EPA EDOCKET as OPPT-2003-
0012-0613.
13. EPA. Economic Analysis in Support of the Final Rule Promulgated
under TSCA Section 12(b). William Silagi. EPA/OPPT/RIB. Washington, DC.
June 1992.
14. Bureau of Labor Statistics (BLS). 2003. Employment Cost Index,
Total Compensation: White-Collar Occupations (Series ID: ECS11102I).
https://data.bls.gov/cgi-bin/srgate. Extracted February 9, 2005.
15. EPA. Wendy Hoffman. Memorandum to Richard Leukroth regarding
calculation of Paperwork Reduction Act burden estimate for the
incineration ECAs. October 20, 2004. Available from EPA EDOCKET as
OPPT-2004-0001-0007.
16. EPA. Lynne Blake-Hedges. Memorandum to EPAB Staff on Unit
Burden Estimates for 12(b) Export Notification for Section 4 Test Rules
and Enforceable Consent Agreements (ECAs). July 20, 1999.
17. ASTM. Standard Test Method for Loss-On Drying by
Thermogravimetry. 2002 Annual Book of ASTM Standards. Volume 14.02,
Designated E 1868-02. pp. 635-638. August 10, 2002.

VI. Statutory and Executive Order Reviews

A. Executive Order 12866

This action announces an Order that incorporates an ECA between EPA
and the Companies. Under Executive Order 12866, entitled Regulatory
Planning and Review (58 FR 51735, October 4, 1993), this action is not
a ``regulatory action'' subject to review by the Office of Management
and Budget (OMB).

B. Paperwork Reduction Act

According to the Paperwork Reduction Act (PRA), 44 U.S.C. 3501 et
seq., an agency may not conduct or sponsor, and a person is not
required to respond to, an information collection request unless it
displays a currently valid control number assigned by OMB. The OMB
control numbers for the EPA's regulations in title 40 of the CFR are
listed in 40 CFR part 9.
The information collection requirements related to the Order that
incorporates the ECA have already been approved by OMB pursuant to the
PRA under OMB control number 2070-0033 (EPA ICR No. 1139). The one-time
public burden for this collection of information is estimated to be
approximately 216.5 hours per response (i.e., per company), or 866
hours total burden for the four companies (Ref. 15). Under the PRA,
``burden'' means the total time, effort, or financial resources
expended by persons to generate, maintain, retain, or disclose or
provide information to or for a Federal Agency. For this collection, it
includes the time needed to review instructions; complete and review
the collection of information; and transmit or otherwise disclose the
information.
The information collection requirements related to export
notification requirements under section 12(b) of TSCA, including those
related to the ECA and the Order that incorporates the ECA, have
already been approved by OMB pursuant to PRA under OMB control number
2070-0030 (EPA ICR No. 0795). The public reporting burden for this
information collection is estimated to be between .5 hours to 1.5 hours
per response. The lower estimate applies to companies that have
previously submitted a TSCA section 12(b) notification for any chemical
or mixture, and therefore need only update an existing form letter
assumed to have been generated electronically. The higher estimate
applies to companies that are first-time submitters of a TSCA section
12(b) notification (Ref. 16), and therefore need to write an initial
letter.

[[Page 39629]]

C. Regulatory Flexibility Act

Since the issuance of the ECA and the Order that incorporates the
ECA, as well as the applicability of the export notification
requirements of TSCA section 12(b) to chemicals addressed in the ECA
and the Order that incorporates the ECA, do not require the issuance of
a proposed rule, the requirements of the Regulatory Flexibility Act
(RFA) (5 U.S.C. 601 et seq.) do not apply.

D. Unfunded Mandates Reform Act

This action does not impose any enforceable duty or contain any
unfunded mandate as described under Title II of the Unfunded Mandates
Reform Act of 1995 (UMRA), Public Law 104-4. Therefore, this action is
not subject to the requirements of UMRA.

E. Executive Order 13132 and 13175

This action is not expected to impact State or Tribal governments
because these governments are not expected to export the chemicals
covered by the ECA or the Order that incorporates the ECA. As such, the
Agency has determined that this action will not have a substantial
direct effect on States, on the relationship between the national
government and the States, or on the distribution of power and
responsibilities among the various levels of government, as specified
in Executive Order 13132, entitled Federalism (64 FR 43255, August 10,
1999) nor will this action have Tribal implications because it does not
significantly or uniquely affect the communities of Indian Tribal
governments, or involve or impose any requirements that affect Indian
Tribes. Accordingly, the requirements of Executive Order 13175,
entitled Consultation and Coordination with Indian Tribal Governments
(65 FR 67249, November 6, 2000), do not apply.

F. Executive Order 13045

Executive Order 13045, entitled Protection of Children from
Environmental Health Risks and Safety Risks (62 FR 1985, April 23,
1997), does not apply to this action because this action is not
designated as an ``economically significant'' regulatory action as
defined by Executive Order 12866 (see Unit VI.A.), nor does this action
establish an environmental standard that is intended to have a
disproportionate effect on children. To the contrary, this action will
provide data and information that EPA and others can use to assess the
risks of these chemicals, including potential risks to sensitive
subpopulations.

G. Executive Order 13211

This action is not subject to Executive Order 13211, entitled
Actions Concerning Regulations That Significantly Affect Energy Supply,
Distribution, or Use (66 FR 28355, May 22, 2001), because this action
is not expected to affect energy supply, distribution, or use.

H. National Technology Transfer Advancement Act

Section 12(d) of the National Technology Transfer and Advancement
Act of 1995 (NTTAA), Public Law 104-113 section 12(d) (15 U.S.C. 272
note) directs EPA to use voluntary consensus standards in its
regulatory activities unless to do so would be inconsistent with
applicable law or otherwise impractical. Voluntary consensus standards
are technical standards (e.g., materials specifications, test methods,
sampling procedures, and business practices) that are developed or
adopted by voluntary consensus standards bodies. The NTTAA directs EPA
to provide Congress, through OMB, explanations when the Agency decides
not to use available and applicable voluntary consensus standards.
The testing conducted under the ECA involves technical standards.
The Agency conducted a search to identify potentially applicable
voluntary consensus standards. No such standard was identified for
incineration testing of FTBP chemicals that are the subject of the ECA.
However, EPA identified a voluntary consensus standard for
thermogravimetric analysis (Ref. 17) which is a required element of the
Phase II ECA testing. Appendix B.1 of the ECA describes specific
modifications to this voluntary consensus standard that are needed to
take into consideration the unique properties of FTBP chemicals.

----------------------------------------------------------------------------------------------------------------
Guideline No. (Year) Guideline name TSCA Guideline No. OECD Guideline No.
----------------------------------------------------------------------------------------------------------------
ASTM E 1868-02 (August 10, 2002) Standard Test Method None None
for Loss-On-Drying by
Thermogravimetry
----------------------------------------------------------------------------------------------------------------

I. Executive Order 12898

This action does not entail special considerations of environmental
justice related issues as delineated by Executive Order 12898, entitled
Federal Actions to Address Environmental Justice in Minority
Populations and Low-Income Populations (59 FR 7629, February 16, 1994).

List of Subjects in Part 799

Environmental protection, Chemicals, Exports, Hazardous substances,
Health, Laboratories, Reporting and recordkeeping requirements.

Dated: June 28, 2005.
Margaret Schneider,
Acting Assistant Administrator, Office of Prevention, Pesticides and
Toxic Substances.

0
Therefore, 40 CFR Chapter I is amended as follows:

PART 799--[AMENDED]

0
1. The authority citation for part 799 continues to read as follows:

Authority: 15 U.S.C. 2603, 2611, 2625.

0
2. Section 799.5025 is amended by revising the heading of the first
column of the table as set forth below and by adding the following
entry to the table in alphabetical order, to read as follows:

Sec. 799.5025 Testing consent orders for mixtures without Chemical
Abstracts Service Registry Numbers.

* * * * *

------------------------------------------------------------------------
Mixture/substance Required test FR citation
------------------------------------------------------------------------
* * * * * * *
Fluorotelomer-based composite ..................
substance:
(1) For Paper containing three ..................
of the following chemical
substances as specified in
the ECA:
(i) Perfluoroalkylethyl Environmental July 8, 2005.
acrylate copolymer, EPA- effects.
designated accession number
(ACC) 171790
(ii) Perfluoroalkyl acrylate ......do.......... Do.
copolymer, ACC 158022

[[Page 39630]]

(iii) Perfluoroalkyl ......do.......... Do.
methacrylate polymer, EPA
document control number
(DCN) 63040000037A
(iv) Substituted ......do.......... Do.
methacrylate, propenoic
acid, perfluoroalkyl
esters, DCN 63040000033B
(v) Perfluoroalkyl acrylic ......do.......... Do.
polymer, DCN 63040000037C
(vi) Poly-.beta.- ......do.......... Do.
fluoroalkylethyl acrylate
and alkyl acrylate, ACC
174993
(vii) Poly(.beta.- ......do.......... Do.
fluoroalkylethyl acrylate
and alkyl acrylate), ACC
70430
(viii) Polysubstituted ......do.......... Do.
acrylic copolymer, ACC
157381
(ix) Perfluoroalkyl acrylate ......do.......... Do.
copolymer latex, ACC No.
70907
(2) For Textile containing six ..................
of the following chemical
substances as specified in
the ECA:
(i) Perfluoroalkylethyl ......do.......... Do.
acrylate copolymer, EPA-
designated accession number
(ACC) 171790
(ii) Perfluoroalkyl acrylate ......do.......... Do.
copolymer, ACC 158022
(iii) Perfluoroalkyl ......do.......... Do.
methacrylate polymer, EPA
document control number
(DCN) 63040000037A
(iv) Substituted ......do.......... Do.
methacrylate, propenoic
acid, perfluoroalkyl
esters, DCN 63040000033B
(v) Perfluoroalkyl acrylic ......do.......... Do.
polymer, DCN 63040000037C
(vi) Poly-.beta.- ......do.......... Do.
fluoroalkylethyl acrylate
and alkyl acrylate, ACC
174993
(vii) Poly(.beta.- ......do.......... Do.
fluoroalkylethyl acrylate
and alkyl acrylate), ACC
70430
(viii) Polysubstituted ......do.......... Do.
acrylic copolymer, ACC
157381
(ix) Perfluoroalkyl acrylate ......do.......... Do.
copolymer latex, ACC 70907
------------------------------------------------------------------------

[FR Doc. 05-13492 Filed 7-7-05; 8:45 am]
BILLING CODE 6560-50-S

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.