National Emission Standards for Hazardous Air Pollutants: Revision of Source Category List Under Section 112 of the Clean Air Act, 37819-37827 [05-12942]

Download as PDF Federal Register / Vol. 70, No. 125 / Thursday, June 30, 2005 / Notices (ii) Evaluate the accuracy of the Agency’s estimate of the burden of the proposed collection of information, including the validity of the methodology and assumptions used; (iii) Enhance the quality, utility, and clarity of the information to be collected; and (iv) Minimize the burden of the collection of information on those who are to respond, including through the use of appropriate automated electronic, mechanical, or other technological collection techniques or other forms of information technology, e.g., permitting electronic submission of responses. Burden Statement: The respondent burden for this collection is estimated to average 1 hour per response for the Partner Registration Form, 40 hours per response for the Annual Assessment Form, and 16 hours per response for the Endorser Registration Form. This results in an estimated annual partner respondent burden of 41 hours for new partners, 40 hours for established partners, and a one-time respondent burden of 10 hours for endorsers. The estimated number of respondents is 1,325 in Year 1; 1,425 in Year 2; and 1,525 in Year 3. Estimated total annual burden on all respondents is 52,350 hours in Year 1; 56,350 hours in Year 2; and 60,350 hours in Year 3. Burden means the total time, effort, or financial resources expended by persons to generate, maintain, retain, or disclose or provide information to or for a Federal agency. This includes the time needed to review instructions; develop, acquire, install, and utilize technology and systems for the purposes of collecting, validating, and verifying information, processing and maintaining information, and disclosing and providing information; adjust the existing ways to comply with any previously applicable instructions and requirements; train personnel to be able to respond to a collection of information; search data sources; complete and review the collection of information; and transmit or otherwise disclose the information. Dated: June 12, 2005. Matt Hale, Director, Office of Solid Waste. [FR Doc. 05–12945 Filed 6–29–05; 8:45 am] BILLING CODE 6560–50–P VerDate jul<14>2003 16:26 Jun 29, 2005 Jkt 205001 ENVIRONMENTAL PROTECTION AGENCY [OAR–2002–0081; FRL–7930–5] RIN 2060–AJ92 National Emission Standards for Hazardous Air Pollutants: Revision of Source Category List Under Section 112 of the Clean Air Act Environmental Protection Agency (EPA). ACTION: Notice of revisions to the list of major source categories. AGENCY: SUMMARY: This action updates the list of major sources of hazardous air pollutants (HAP) emissions for which regulatory actions have been developed. The source category list is required under section 112(c) of the Clean Air Act (CAA) and was last published in the Federal Register on February 12, 2002. This action meets the requirement in section 112(c)(1) to publish from time to time, but no less often than every 8 years, a list of all major categories and subcategories of sources reflecting revisions since the list was last published. The revisions reflected in this notice have previously been published in actions associated with proposing and promulgating emission standards for individual source categories, and public comments have been requested in the context of those actions. This action does not include any revisions to the schedule for standards provided for by CAA section 112(e). EFFECTIVE DATE: June 30, 2005. ADDRESSES: EPA has established a docket for this action under Docket ID No. OAR–2002–0081. All documents in the docket are listed in the index. Publicly available docket materials are available for public inspection and copying between 8:30 a.m. and 4:30 p.m., Monday through Friday, excluding legal holidays. The docket is located at: U.S. EPA, Air and Radiation Docket and Information Center (6102T), 1301 Constitution Avenue, NW., Room B108, Washington, DC 20460, or by calling (202) 566–1744 or 1742. A reasonable fee may be charged for copying docket materials. FOR FURTHER INFORMATION CONTACT: Ms. Maria Noell, U.S. EPA, Office of Air Quality Planning and Standards (OAQPS), Organic Chemicals Group (C504–4), Research Triangle Park, North Carolina 27711, telephone number (919) 541–5607, facsimile number (919) 541– 3470, electronic mail address noell.maria@epa.gov. SUPPLEMENTARY INFORMATION: Docket. EPA has established an official public PO 00000 Frm 00075 Fmt 4703 Sfmt 4703 37819 docket for this action under Docket ID No. OAR–2002–0081. The official public docket consists of the documents specifically referenced in this action, any public comments received, and other information related to this action. Although a part of the official docket, the public docket does not include Confidential Business Information or other information whose disclosure is restricted by statute. The official public docket is the collection of materials that is available for public viewing at the Office of Air and Radiation Docket and Information Center (Air Docket) in the EPA Docket Center, (EPA/DC) EPA West, Room B102, 1301 Constitution Avenue, NW., Washington, DC. The EPA Docket Center Public Reading Room is open from 8:30 a.m. to 4:30 p.m., Monday through Friday, excluding legal holidays. The telephone number for the Reading Room is (202) 566–1744, and the telephone number for the Air Docket is (202) 566–1742. Electronic Docket Access. You may access this notice electronically through the EPA Internet under the Federal Register listings at http://www.epa.gov/ fedrgstr/. An electronic version of the public docket is available through EPA’s electronic public docket and comment system, EPA Dockets. You may use EPA Dockets at http://www.epa.gov/edocket/ to view public documents, access the index listing of the contents of the official public docket, and to access those documents in the public docket that are available electronically. Although not all docket materials may be available electronically, you may still access any of the publicly available docket materials through the docket facility in the above paragraph entitled ‘‘Docket.’’ Once in the system, select ‘‘search,’’ then key in the appropriate docket identification number. Worldwide Web (WWW). In addition to being available in the docket, an electronic copy of today’s notice will also be available on the WWW through the Technology Transfer Network (TTN). Following signature, a copy of the notice will be posted on the TTN’s policy and guidance page for newly proposed or promulgated rules http:// www.epa.gov/ttn/oarpg. The TTN provides information and technology exchange in various areas of air pollution control. If more information regarding the TTN is needed, call the TTN HELP line at (919) 541–5384. I. What Is the History of the Source Category List? The CAA requires, under section 112, that EPA list all categories of major sources emitting HAP and such E:\FR\FM\30JNN1.SGM 30JNN1 37820 Federal Register / Vol. 70, No. 125 / Thursday, June 30, 2005 / Notices Resins at 63 FR 68832 (December 14, 1998), and the final NESHAP for Amino/Phenolic Resins Production at 65 FR 3275 (January 20, 2000) which serve as the official actions to rename and combine the source categories. categories of area sources warranting regulation and promulgate national emission standards for hazardous air pollutants (NESHAP) to control, reduce, or otherwise limit the emissions of HAP from such categories of major and area sources. Pursuant to the various specific listing requirements in section 112(c), on July 16, 1992 (57 FR 31576), we published a list of 174 categories of major and area sources—referred to as the initial list—for which we would develop emission standards. On December 3, 1993 (58 FR 63941), pursuant to requirements in section 112(e), we published a schedule for the promulgation of emission standards for each of the 174 initially listed source categories. When we publish notices that affect actions relating to individual source categories, it is important to reflect the resultant changes on the list. We published five separate notices where we listed or removed sources for specific pollutants under section 112(c)(6) on April 10, 1998 (63 FR 17838); and added area sources under section 112(k) on July 19, 1999 (64 FR 38706); June 26, 2002 (67 FR 43112); November 8, 2002 (67 FR 68124); and November 22, 2002 (67 FR 70427). On June 4, 1996 (61 FR 28197), we published a notice that referenced all previous list and schedule changes and consolidated those actions, along with several new actions, into a revised source category list and schedule. Subsequently, we published five additional notices which updated the list and schedule: February 12, 1998 (63 FR 7155); May 17, 1999 (64 FR 26743); November 18, 1999 (64 FR 63025); January 30, 2001 (66 FR 8220); and February 12, 2002 (67 FR 6521). You should read the previous notices for information relating to the development of the initial list and schedule and subsequent changes. III. What Are the Revisions EPA Is Making to the Source Category List? II. Why Is EPA Issuing This Notice? 1. Amino/Phenolic Resins Production This notice announces the changes to the source category list that have occurred since we last updated the list on February 12, 2002 (67 FR 6521). For general descriptions of source categories listed in Table 1, please refer to ‘‘Documentation for Developing the Initial Source Category List’’ (EPA–450/ 3–91–030) and the Federal Register notice for the first revision of the source category list and schedule (61 FR 28197, June 4, 1996). For subsequent changes and/or amendments to the major source categories listed, please refer to: http:// www.epa.gov/ttn/atw/mactfnlalph.html. Amino Resins and Phenolic Resins source categories were subsumed and renamed Amino/Phenolic Resins Production. The information obtained during the information gathering phase of the project demonstrated that the manufacturing processes, emission characteristics, and applicable control technologies for facilities in these two source categories are similar. Based on these factors, the EPA concluded that these two source categories are to be treated as a single source category. For further information, you should refer to the preamble to the proposed NESHAP for Manufacture of Amino/Phenolic 4. Industrial/Commercial/Institutional Boilers and Process Heaters The Institutional/Commercial Boilers, the Process Heaters, and the Industrial Boiler source categories have been combined into the Industrial/ Commercial/Institutional Boilers and Process Heaters source category. For further information, you should refer to the proposed preamble for the Industrial/Commercial/Institutional Boilers and Process Heaters NESHAP at 68 FR 1660 (January 13, 2003), and the final NESHAP for Industrial/ Commercial/Institutional Boilers and Process Heaters at 69 FR 55218 (September 13, 2004) which serve as the VerDate jul<14>2003 16:26 Jun 29, 2005 Jkt 205001 A. Changes to Source Category Names The following source categories were renamed to better describe the source category: 1. Amino Resins Production and Phenolic Resins Production are subsumed and renamed Amino/ Phenolic Resins Production. 2. Engine Test Facilities is renamed Engine Test Cells/Stands. 3. Industrial Boilers is renamed Industrial/Commercial/Institutional Boilers and Process Heaters. 4. Printing, Coating, and Dyeing of Fabrics is renamed Printing, Coating, and Dyeing of Fabrics and Other Textiles. 5. Refractories Manufacturing is renamed Refractory Products Manufacturing. B. Division of a Source Category To Create Two New Source Categories The Brick and Structural Clay Products Manufacturing source category and the Clay Ceramics Manufacturing source category were separated and added to the list of categories of major sources. These newly created source categories are replacing the Clay Products Manufacturing source category, which was on the initial list of source categories to be regulated. For further information, you should refer to the proposed preamble to the NESHAP for Brick and Structural Clay Products Manufacturing and the NESHAP for Clay Ceramics Manufacturing (67 FR 47894, July 22, 2002), which serve as the official actions to add the source categories. These NESHAP were promulgated on May 16, 2003 at 68 FR 26690. C. Subsumptions of Source Categories Today’s notice updates the source category list to reflect the following subsumptions: PO 00000 Frm 00076 Fmt 4703 Sfmt 4703 2. Engine Test Cells/Stands The Engine Test Facilities and Rocket Engine Tet Firing source categories were subsumed and renamed the Engine Test Cells/Stands source category. After gathering information about the source categories, we concluded that rocket testing facilities are similar in many respects to engine test cells/stands; therefore, we decided to regulate rocket engine test firing facilities as a subcategory of the Engine Test Cells/ Stands source category. For further information, you should refer to the proposed preamble for the NESHAP for Engine Test Cells/Stands at 67 FR 34548 (May 14, 2002), and the final NESHAP for Engine Test Cells/Stands at 68 FR 28774 (May 27, 2003) which serve as the official actions to rename and combine the source categories. 3. Hydrochloric Acid Production The Fume Silica Production source category was subsumed into the Hydrochloric Acid Production source category. Originally, both hydrochloric acid production and fume silica production were listed separately as major sources under the production of inorganic chemicals group. In developing the respective NESHAP, it was learned that the primary source of HAP emissions in the two source categories was the same process. For further information, you should refer to the proposed preamble for the NESHAP for Hydrochloric Acid Production at 66 FR 48175 (September 8, 2001), and the final NESHAP for Hydrochloric Acid Production at 68 FR 19076 (April 17, 2003) which serve as the official actions to combine the source categories. E:\FR\FM\30JNN1.SGM 30JNN1 Federal Register / Vol. 70, No. 125 / Thursday, June 30, 2005 / Notices official actions to combine the source categories. 5. Iron and Steel Foundries The Iron Foundries and the Steel Foundries source categories have been combined into a new major source category called Iron and Steel Foundries. Since some facilities produce both iron castings and steel castings in the same foundry (i.e., using the same equipment), it is more sensible to have facilities subject to only one rule rather than two separate rules. For further information, you should refer to the proposed preamble for the NESHAP for Iron and Steel Foundries at 67 FR 78274 (December 23, 2002), and the final NESHAP for Iron and Steel Foundries at 69 FR 21906 (April 22, 2004) which serve as the official actions to combine the source categories. 6. Surface Coating of Miscellaneous Metal Parts and Products The Asphalt/Coal Tar ApplicationMetal Pipes source category has been subsumed into the Surface Coating of Miscellaneous Metal Parts and Products source category. For further information, you should refer to the proposed preamble for the NESHAP for Surface Coating of Miscellaneous Metal Parts and Products at 67 FR 52780 (August 31, 2002), and the final NESHAP for Surface Coating of Miscellaneous Metal Parts and Products at 69 FR 130 (January 2, 2004) which serve as the official actions to combine the source categories. 7. Miscellaneous Organic Chemical Manufacturing and Miscellaneous Coating Manufacturing The following source categories have been subsumed into the Miscellaneous Organic Chemical Manufacturing source category: benzyltrimethylammonium chloride production, carbonyl sulfide production, chelating agents production, chlorinated paraffins production, ethylidene norbornene production, explosives production, hydrazine production, photographic chemicals production, phthalate plasticizers production, rubber chemicals production, symmetrical tetrachloropyridine production, OBPA/ 1,3-diisocyanate production, alkyd resins production, polyester resins production, polyvinyl alcohol production, polyvinyl acetate emulsions production, polyvinylbutyral production, polymerized vinylidene chloride production, polymethylmethacrylate production, maleic anhydride copolymers production, ammonium sulfate production—caprolactam by-product VerDate jul<14>2003 16:26 Jun 29, 2005 Jkt 205001 plants, and quaternary ammonium compounds production. Along with these 22 source categories, the Miscellaneous Organic Chemical Manufacturing source category was also defined to include other organic chemical manufacturing processes which are not being covered by any other maximum achievable control technology standards. The Manufacture of Paints, Coatings, and Adhesives source category has been subsumed into the Miscellaneous Coating Manufacturing source category. For further information, you should refer to the proposed preamble for the NESHAP for Miscellaneous Organic Chemical Manufacturing and Miscellaneous Coating Manufacturing at 67 FR 16154 (April 4, 2002). The final NESHAP for Miscellaneous Organic Chemical Manufacturing was promulgated at 68 FR 63852 (November 10, 2003), and the final NESHAP for Miscellaneous Coating Manufacturing was promulgated at 68 FR 69164 (December 11, 2003). These final NESHAP serve as the official actions to combine and rename the source categories. D. Changes to Source Category Designation In a final rule issued on March 29, 2005, at 70 FR 15994, EPA revised the regulatory finding that it issued in December 2000 pursuant to section 112(n)(1)(A) of the CAA and removed coal- and oil-fired electric utility steam generating units from the CAA section 112(c) source category list. EPA promulgated the Standards of Performance for New and Existing Stationary Sources: Electric Utility Steam Generating Units on March 15, 2005, under the authority of CAA section 111. Today’s notice updates the source category list to reflect the March 29 final action. Today’s notice also serves as the official notice of our determination that currently there are no major sources with paint stripping operations whose operations are not already subject to other NESHAP. As a result, we are subsuming paint stripping operations into those other NESHAP. Paint stripping is a process that is invariably part of a larger process whose purpose is to prepare a surface for a new coating. The process of removing the old coat, preparing the surface, and applying a new one is, as we found, regulated by other NESHAP, and these NESHAP have already helped us significantly reduce emissions of HAP from major sources and satisfy our obligation under CAA section 112(d) to set standards for major PO 00000 Frm 00077 Fmt 4703 Sfmt 4703 37821 sources in the paint stripping source category. The Paint Stripping Operations source category was listed for regulation under section 112(c) of the CAA. Paint stripping is defined, for purposes of rulemaking, as the removal of paint, or any other type of coating, using HAPcontaining chemicals. Methylene chloride is the HAP that predominates in paint stripping operations. Major sources of paint stripping include facilities that use methylene chloride or other HAP to remove coatings from furniture, aircraft, metal parts, or any other type of component for purposes of preparing the surface for a new coating. To identify major sources of paint stripping operations, we engaged in a number of activities that helped us obtain information about the nature of the paint removal processes at a given facility and the associated HAP emissions. This process included searching emissions databases, such as the Atmospheric Information Retrieval System (AIRS), to find facilities with methylene chloride and any other types of facilities that perform paint removal. Even though we were able to identify many facilities with methylene chloride emissions, we found no unregulated major sources through this search that would be affected by paint stripping NESHAP. Our search included both free standing major sources and collocated sources. We identified several major sources that perform paint removal operations; however, these operations are already regulated under other surface coating NESHAP such as aerospace and wood furniture. We also reviewed the air permits and related information of potential paint stripping facilities with HAP emissions in several States. We requested the States of North Carolina, California, New York, Illinois, Texas, and Florida to provide us with lists of facilities that emit methylene chloride or any other HAP associated with paint removal processes. These States were a representative subset with relatively large numbers of facilities with reported methylene chloride emissions. Our information gathering and permit review effort with these States identified no major sources that would be potentially affected by a paint stripping NESHAP. Even though we identified several sources with paint stripping operations, either the operations were already covered by other NESHAP as listed below, or the sources were not major sources. Supporting documentation for these activities can be found in the ‘‘Paint Stripping Operations’’ docket (number A–99–42). The ADDRESSES section of this preamble E:\FR\FM\30JNN1.SGM 30JNN1 37822 Federal Register / Vol. 70, No. 125 / Thursday, June 30, 2005 / Notices provides information on how to obtain copies of documents contained in the docket. Source category Status Subpart FR publication date and citation or contact information Aerospace Industry ............................................................................................................. Large Appliance (Surface Coating) .................................................................................... Metal Furniture (Surface Coating) ...................................................................................... Misc. Metal Parts and Products (Surface Coating) ............................................................ Wood Furniture ................................................................................................................... Final ........... Final ........... Proposed ... Proposed ... Final ........... GG NNNN RRRR MMMM JJ 09/01/95, 60FR45948 7/23/02, 67FR48253 04/24/02, 67FR20205 08/13/02, 67FR52799 12/07/95, 60FR62930 There are, however, thousands of small paint stripping facilities that are not major sources and that release HAP emissions. These small facilities will be studied and potentially subject to rulemaking in the future as area sources. IV. Is This Action Subject to Judicial Review? Section 112(e)(4) of the CAA states that, notwithstanding section 307 of the CAA, no action of the Administrator listing a source category or subcategory under section 112(c) shall be a final Agency action subject to judicial review, except that any such action may be reviewed under section 307 when the Administrator issues emission standards for such pollutant or category. Section 112(e)(3) states that the determination of priorities for promulgation of standards for the listed source categories is not a rulemaking and is not subject to judicial review, except that failure to promulgate any standard pursuant to the schedule established under section 112(e) shall be subject to review under section 304 of the CAA. Therefore, today’s notice is not subject to judicial review. V. Is EPA Asking for Public Comment? Prior to issuance of the initial source category list, we published a draft initial list for public comment (56 FR 28548, June 21, 1991). Although we were not required to take public comment on the initial source category list, we believed it was useful to solicit input on a number of issues related to the list. Indeed, in most instances, even where there is no statutory requirement to take comment, we solicit public comments on actions we are contemplating. We have decided, however, that it is unnecessary to solicit additional public comment on the revisions reflected in today’s action. Most of the changes discussed in this notice have been subject to comment in the MACT standard setting process. VI. Statutory and Executive Order Reviews Today’s action is not a rule; it is essentially an information sharing activity which does not impose regulatory requirements or costs. Therefore, the requirements of Executive Order 13045 (Protection of Children from Environmental Health Risks and Safety Risks), Executive Order 13084 (Consultation and Coordination with Indian Tribal Governments), Executive Order 13132 (Federalism), Executive Order 13211 (Actions Concerning Regulations that Significantly Affect Energy Supply, Distribution or Use), the Regulatory Flexibility Act, the National Technology Transfer and Advancement Act, and the Unfunded Mandates Reform Act do not apply to today’s notice. Also, this notice does not contain any information collection requirements and, therefore, is not subject to the Paperwork Reduction Act, 44 U.S.C. 3501 et seq. Under Executive Order 12866 (58 FR 51735, October 4, 1993), a regulatory action determined to be ‘‘significant’’ is subject to the Office of Management and Budget (OMB) review and the requirements of the Executive Order. The Executive Order defines ‘‘significant’’ regulatory action as one that is likely to lead to a rule that may either (1) Have an annual effect on the economy of $100 million or more, or adversely affect a sector of the economy, productivity, competition, jobs, the environment, public health or safety, or State, local or tribal governments or communities; (2) create a serious inconsistency or otherwise interfere with an action taken or planned by another agency; (3) materially alter the budgetary impact of entitlements, grants, user fees, or loan programs or the rights and obligations of recipients thereof; or (4) raise novel legal or policy issues arising out of legal mandates, the President’s priorities, or the principles set forth in the Executive Order. The OMB has determined that this action is not significant under the terms of Executive Order 12866. Dated: June 23, 2005. Jeffrey R. Holmstead, Assistant Administrator for Air and Radiation. TABLE 1.—CATEGORIES OF MAJOR SOURCES OF HAZARDOUS AIR POLLUTANTS AND REGULATION PROPOSAL AND PROMULGATION DATES [Revision Date: June 30, 2005.) Refer to http://www.epa.gov/ttn/atw/mactfnlalph.html for the listing of all regulatory actions for each individual rule and http://www.epa.gov/ttn/atw/socatlst/socatpg.html for previous notices on the source category list and revisions.] Statutory promulgation date court-ordered date Source category Aerospace Industries ................................................................................................................ Asphalt Processing and Asphalt Roofing Manufacturing ......................................................... Auto and Light Duty Truck (Surface Coating) .......................................................................... Boat Manufacturing ................................................................................................................... VerDate jul<14>2003 16:26 Jun 29, 2005 Jkt 205001 PO 00000 Frm 00078 Fmt 4703 Sfmt 4703 11/15/1994 N/A 11/15/2000 2/28/2003 11/15/2000 2/28/2004 11/15/2000 NA E:\FR\FM\30JNN1.SGM 30JNN1 FEDERAL REGISTER proposal and final citations and dates 59FR29216(P), 6/6/1994 60FR45956(F), 9/1/1995 66FR58610(P), 11/21/2001 68FR24562(F), 5/7/2003 67FR78612(P), 12/24/2002 69FR22601(F), 4/26/2004 65FR43842(P), 7/14/2000 66FR44218(F), 8/22/2001 Federal Register / Vol. 70, No. 125 / Thursday, June 30, 2005 / Notices 37823 TABLE 1.—CATEGORIES OF MAJOR SOURCES OF HAZARDOUS AIR POLLUTANTS AND REGULATION PROPOSAL AND PROMULGATION DATES—Continued [Revision Date: June 30, 2005.) Refer to http://www.epa.gov/ttn/atw/mactfnlalph.html for the listing of all regulatory actions for each individual rule and http://www.epa.gov/ttn/atw/socatlst/socatpg.html for previous notices on the source category list and revisions.] Statutory promulgation date court-ordered date Source category Brick and Structural Clay Products Manufacturing ................................................................... FEDERAL REGISTER proposal and final citations and dates 11/15/2000 2/28/2003 11/15/2000 NA 67FR47894(P), 7/22/2002 68FR26690(F), 5/16/2003 65FR52166(P), 8/28/2000 67FR40044(F), 6/11/2002 Chemical Recovery Combustion Sources at Kraft, Soda, Sulfite and Stand-Alone SemiChemical Pulp Mills—MACT II. 11/15/1997 63FR18754(P), 4/15/1998 66FR3180(F), 1/12/2001 Chromium Electroplating ........................................................................................................... 12/15/2000 11/15/1994 NA 58FR65768(P), 12/16/1993 60FR4948(F), 1/25/1995 11/15/2000 2/28/2003 12/31/1992 NA 11/15/2000 2/28/2003 11/15/2000 8/29/2003 11/15/1994 NA 11/15/1992 NA 67FR47894(P), 7/22/2002 68FR26690(F), 5/16/2003 57FR57534(P), 12/4/1992 58FR57898(F), 10/27/1993 66FR35326(P), 7/3/2001 68FR18008(F), 4/14/2003 68FR1888(P), 1/13/2003 69FR10512(F), 3/5/2004 59FR10591(P), 3/7/1994 59FR62585(F), 12/6/1994 56FR64382(P), 12/9/1991 58FR49354(F), 9/22/1993 11/15/2000 2/28/2003 11/15/2000 2/28/2003 11/15/1997 5/15/1999 67FR34548(P), 5/14/2002 68FR28774(F), 5/27/2003 67FR46028(P), 7/11/2002 68FR32172(F), 5/29/2003 63FR41509(P), 8/4/1998 64FR7149(SP), 2/12/1999 64FR27450(F), 5/20/1999 66FR41718(P), 8/8/2001 68FR18062(F), 4/14/2003 61FR68406(P), 12/27/1996 63FR53980(F), 10/7/1998 66FR50768(P), 10/4/2001 67FR64498(F), 10/18/2002 59FR5868(P), 2/8/1994 59FR64303(F), 12/14/1994 63FR55178(P), 10/14/1998 64FR34854(F), 6/29/1999 Cellulose Products Manufacturing ............................................................................................ Cellulose Ethers Production: • Methyl Cellulose • Carboxymethylcellulose • Cellulose Ethers Miscellaneous Viscose Processes: • Cellulose Food Casing • Rayon • Cellulosic Sponge • Cellophane • Chromic Acid Anodizing • Decorative Acid • Hard Chromium Electroplating Clay Ceramics Ceramics Manufacturing .................................................................................. Coke Ovens: Charging, Top Side and Door Leaks .................................................................. Coke Ovens: Pushing, Quenching and Battery Stacks ............................................................ Combustion Turbines ................................................................................................................ Commercial Sterilizers .............................................................................................................. Dry Cleaning ............................................................................................................................. • • • • Commercial Dry Cleaning Dry-to-Dry Commercial Dry Cleaning Transfer Machines Industrial Dry Cleaning Dry-to-Dry Industrial Dry Cleaning Transfer Machines Engine Test Cells/Stands ......................................................................................................... Fabric Printing, Coating, and Dyeing ........................................................................................ Ferroalloys Production: Silicomanganese and Ferromanganese ............................................. Flexible Polyurethane Foam Fabrication Operations ............................................................... Flexible Polyurethane Foam Production ................................................................................... Friction Materials Manufacturing ............................................................................................... Gasoline Distribution (Stage 1) ................................................................................................. Generic MACT I ........................................................................................................................ VerDate jul<14>2003 16:26 Jun 29, 2005 Jkt 205001 PO 00000 Frm 00079 Fmt 4703 Sfmt 4703 11/15/2000 2/28/2003 11/15/1997 NA 11/15/2000 NA 11/15/1994 NA 11/15/1997 5/15/1999 E:\FR\FM\30JNN1.SGM 30JNN1 37824 Federal Register / Vol. 70, No. 125 / Thursday, June 30, 2005 / Notices TABLE 1.—CATEGORIES OF MAJOR SOURCES OF HAZARDOUS AIR POLLUTANTS AND REGULATION PROPOSAL AND PROMULGATION DATES—Continued [Revision Date: June 30, 2005.) Refer to http://www.epa.gov/ttn/atw/mactfnlalph.html for the listing of all regulatory actions for each individual rule and http://www.epa.gov/ttn/atw/socatlst/socatpg.html for previous notices on the source category list and revisions.] Statutory promulgation date court-ordered date Source category • • • • FEDERAL REGISTER proposal and final citations and dates Acetal Resins Production Acrylic Fibers/Modacrylic Fibers Production Hydrogen Fluoride Production Polycarbonates Production Generic MACT II ....................................................................................................................... 11/15/2000 NA 65FR76408(P), 12/67/2000 67FR46258(F), 7/12/2002 Hazardous Waste Combustors Phase I ................................................................................... 11/15/2000 Phase II .............................................................................................................................. Hydrochloric Acid Production .................................................................................................... NA 11/15/2000 2/28/2003 11/15/2000 2/27/2004 11/15/1994 NA 11/15/2000 2/28/2003 11/15/2000 8/29/2003 11/15/2000 NA 11/15/2000 NA 11/15/2000 8/29/2003 11/15/1994 NA 11/15/2000 NA 11/15/1997 NA 11/15/2000 8/29/2003 11/15/2000 NA 11/15/2000 2/28/2003 11/15/1997 5/15/1999 61FR17358(P), 4/19/1996 64FR52828(F), 9/30/1999 69FR21198(P), 4/20/2004 66FR48174(P), 9/18/2001 68FR19076(F), 4/17/2003 68FR1660(P), 2/26/2004 69FR55218(F), 9/13/2004 58FR43028(P), 8/12/1993 59FR46339(F), 9/8/1994 66FR36836(P), 7/13/2001 68FR27645(F), 5/20/2003 67FR78274(P), 12/23/2002 69FR21905(F), 4/22/2004 65FR81134(P), 12/22/2000 67FR48254(F), 7/23/2002 65FR58702(P), 10/2/2000 67FR9156(F), 2/27/2002 67FR78046(P), 12/20/2002 69FR394(F), 1/5/2004 59FR11662(P), 3/11/1994 59FR64580(F), 12/15/1994 63FR55812(P), 10/19/1998 64FR27876(F), 5/21/2001 59FR25004(P), 5/13/1994 60FR48388(F), 9/19/1995 68FR2110(P), 1/15/2003 68FR64432(F), 11/13/2003 65FR44616(P), 7/18/2000 67FR39794(F), 6/10/2002 67FR20206(P), 4/24/2002 68FR28606(F), 5/23/2003 62FR25370(P), 5/8/1997 64FR7149(SP), 2/12/1999 64FR29490(F), 6/1/1999 67FR16154(P), 4/4/2002 68FR69164(F), 12/11/2003 67FR52780(P), 8/13/2002 69FR130(F), 1/2/2004 67FR16154(P), 4/4/2002 68FR63852(F), 11/10/2003 • • • • Carbon Black Production Spandex Production Cyanide Chemicals Manufacturing Ethylene Processes Industrial/Commercial/Institutional Boilers and Process Heaters ............................................. Industrial Process Cooling Towers ........................................................................................... Integrated Iron and Steel Manufacturing .................................................................................. Iron and Steel Foundries .......................................................................................................... Large Appliance (Surface Coating) .......................................................................................... Leather Finishing Operations .................................................................................................... Lime Manufacturing .................................................................................................................. Magnetic Tapes (Surface Coating) ........................................................................................... Manufacturing of Nutritional Yeast ........................................................................................... Marine Vessel Loading Operations .......................................................................................... Metal Can (Surface Coating) .................................................................................................... Metal Coil (Surface Coating) ..................................................................................................... Metal Furniture (Surface Coating) ............................................................................................ Mineral Wool Production ........................................................................................................... Miscellaneous Coatings Manufacturing .................................................................................... Miscellaneous Metal Parts and Products (Surface Coating) .................................................... Miscellaneous Organic Chemical Manufacturing ...................................................................... VerDate jul<14>2003 16:26 Jun 29, 2005 Jkt 205001 PO 00000 Frm 00080 Fmt 4703 Sfmt 4703 11/15/2000 8/29/2003 11/15/2000 8/29/2003 11/15/2000 8/29/2003 E:\FR\FM\30JNN1.SGM 30JNN1 Federal Register / Vol. 70, No. 125 / Thursday, June 30, 2005 / Notices 37825 TABLE 1.—CATEGORIES OF MAJOR SOURCES OF HAZARDOUS AIR POLLUTANTS AND REGULATION PROPOSAL AND PROMULGATION DATES—Continued [Revision Date: June 30, 2005.) Refer to http://www.epa.gov/ttn/atw/mactfnlalph.html for the listing of all regulatory actions for each individual rule and http://www.epa.gov/ttn/atw/socatlst/socatpg.html for previous notices on the source category list and revisions.] Statutory promulgation date court-ordered date Source category • • • • • • • • • • • • • • • • • • • • • • FEDERAL REGISTER proposal and final citations and dates Alkyd Resins Ammonium Sulfate Production-Caprolactum By-Products Benzyltrimethylammonium Chloride Carbonyl Sulfide Chelating Agents Chlorinated Paraffins Ethylidene Norbornene Explosives Hydrazine Maleic Anhydride Copolymers OBPA/1, 3–Diisocyanate Photographic Chemicals Phthalate Plasticizers Polyester Resins Polymerized Vinylidene Chloride Polymethyl Methacrylate Resins Polyvinyl Acetate Emulsions Polyvinyl Alcohol Polyvinyl Butyral Quaternary Ammonium Compounds Rubber Chemicals Symmetrical Tetrachloropyridine Municipal Solid Waste Landfills ................................................................................................ 11/15/2000 NA Off-Site Waste and Receovery Operations .............................................................................. 11/15/1994 NA 11/14/1997 5/15/1999 11/15/2000 8/29/2003 11/15/2000 NA 11/15/1997 5/15/1999 11/15/1997 5/15/1999 11/15/1994 NA 11/15/1997 NA 11/15/1997 5/15/1999 11/15/2000 8/29/2003 11/15/2000 2/28/2004 11/15/1997 5/15/1999 11/15/1994 NA 65FR66672(P), 11/7/2000 67FR36459(SP), 5/23/2002 68FR2227(F), 1/16/2003 59FR51913(P), 10/13/1994 61FR34140(F), 7/1/1996 63FR6288(P), 2/6/1998 64FR32610(F), 6/17/1999 67FR15674(P), 4/2/2002 69FR5038(F), 2/3/2004 65FR55332(P), 9/13/2000 67FR72330(F), 12/4/2002 62FR60566(P), 10/10/1997 64FR33549(F), 6/23/1999 63FR48890(P), 9/11/1998 67FR17762(F), 4/11/2002 59FR36130(P), 7/15/1994 60FR43244(F), 8/18/1995 62FR15753(P), 4/2/1997 63FR50280(F), 9/21/1998 61FR68430(P), 12/27/1996 64FR31358(F), 6/10/1999 67FR72276(P), 12/4/2002 69FR20967(F), 4/19/2004 68FR1276(P), 1/9/2003 69FR45944(F), 7/30/2004 62FR46804(P), 9/4/1997 64FR19420(F), 6/1/1999 60FR30801(P), 6/12/1995 61FR46906(F), 9/5/1996 11/15/1994 NA 59FR25387(P), 5/16/1994 60FR12670(F), 3/8/1995 Oil and Natural Gas Production ................................................................................................ Organic Liquids Distribution (Non-Gasoline) ............................................................................ Paper and Other Web (Surface Coating) ................................................................................. Pesticide Active Ingredient Production ..................................................................................... Petroleum Refineries—Catalytic Cracking Units, Catalytic Reforming Units, and Sulfur Recovery Units. Petroleum Refineries—Other Sources Not Distinctly Listed .................................................... Pharmaceuticals Productions ................................................................................................... Phosphate Fertilizers Production and Phosphoric Acid Manufacturing ................................... Plastic Parts and Products (Surface Coating) .......................................................................... Plywood and Composite Wood Products ................................................................................. Polyether Polyols Production .................................................................................................... Polymers and Resins ................................................................................................................ • • • • • • • • • Butyl Rubber Epichlorohydrin Elastomers Ethylene-Propylene Rubber Hypalon (tm) Neoprene Nitrile Butadiene Rubber Polybutadiene Rubber Polysulfide Rubber Styrene-Butadiene Rubber and Latex Polymers and Resins II ............................................................................................................. VerDate jul<14>2003 16:26 Jun 29, 2005 Jkt 205001 PO 00000 Frm 00081 Fmt 4703 Sfmt 4703 E:\FR\FM\30JNN1.SGM 30JNN1 37826 Federal Register / Vol. 70, No. 125 / Thursday, June 30, 2005 / Notices TABLE 1.—CATEGORIES OF MAJOR SOURCES OF HAZARDOUS AIR POLLUTANTS AND REGULATION PROPOSAL AND PROMULGATION DATES—Continued [Revision Date: June 30, 2005.) Refer to http://www.epa.gov/ttn/atw/mactfnlalph.html for the listing of all regulatory actions for each individual rule and http://www.epa.gov/ttn/atw/socatlst/socatpg.html for previous notices on the source category list and revisions.] Statutory promulgation date court-ordered date Source category FEDERAL REGISTER proposal and final citations and dates • Epoxy Resins • Non-Nylon Polyamides Polymers and Resins III—Amino/Phenolic Resins ................................................................... Polymers and Resins IV ........................................................................................................... • • • • • • • 11/15/1997 12/15/1999 11/15/1994 NA 63FR68832(P), 12/14/1998 65FR3276(F), 1/20/2000 60FR16090(P), 3/29/1995 61FR48208(F), 9/12/1996 11/15/2000 NA 11/15/1997 5/15/1999 11/15/1997 NA 11/15/1997 5/15/1999 65FR76958(P), 12/6/2000 67FR45886(F), 7/10/2002 63FR14182(P), 3/24/1998 64FR31897(F), 6/14/1999 61FR188(P), 9/26/1996 62FR52383(F), 10/07/1997 63FR19582(P), 4/20/1998 65FR39326(SP), 6/26/2000 67FR40477(F), 6/12/2002 63FR19200(P), 4/17/1998 64FR30194(F), 6/4/1999 68FR2970(P), 1/22/2003 68FR58615(F), 10/10/2003 60FR13664(P), 3/14/1995 61FR27132(F), 5/30/1996 63FR66084(P), 12/1/1998 64FR57572(F), 10/26/1999 58FR66078(P), 12/17/1993 63FR18504(F), 4/15/1998 67FR77830(P), 12/19/2002 69FR33474(F), 6/15/2004 68FR42108(P), 6/20/2002 68FR18730(F), 4/16/2003 66FR40324(P), 8/2/2001 68FR19375(F), 4/21/2003 65FR62414(P), 10/18/2000 67FR45588(F), 7/9/2002 63FR6946(P), 2/11/1999 65FR15689(F), 3/23/2000 59FR63941(P), 6/9/1994 60FR32587(F), 6/23/1995 67FR30848(P), 5/8/2002 68FR27913(F), 5/22/2003 59FR62681(P), 12/6/1994 60FR64330(F), 12/15/1995 67FR49398(P), 7/30/2002 68FR58172(F), 10/8/2003 65FR34251(P), 5/26/2000 66FR19006(F), 4/12/2001 62FR49051(P), 9/18/1997 64FR33202(F), 6/22/1999 57FR62608(P), 12/31/1992 59FR19402(F), 4/22/1994 62FR44614(P), 8/22/1999 63FR26078(F), 5/12/1998 67FR77562(P), 12/18/2002 68FR61868(F), 10/30/2003 65FR34278(P), 5/26/2000 67FR17824(F), 4/11/2002 Acrylonitrile-Butadiene-Styrene Methyl Methacrylate-Acrylonitrile-Butadiene-Styrene Methyl Methacrylate-Butadiene-Styrene Terpolymers Nitrile Resins Polyethylene Terephthalate Polystyrene Styrene-Acrylonitrile Polyvinyl Chloride and Copolymers Production ........................................................................ Portland Cement Manufacturing ............................................................................................... Primary Aluminum Production .................................................................................................. Primary Copper Smelting .......................................................................................................... Primary Lead Smelting ............................................................................................................. Primary Magnesium Refining .................................................................................................... Printing and Publishing (Surface Coating) ................................................................................ Publicly Owned Treatment Works ............................................................................................ Pulp and Paper Production (MACT I and III) ........................................................................... Reciprocating Internal Combustion Engines ............................................................................ Refractory Products Manufacturing .......................................................................................... Reinforced Plastic Composites Production ............................................................................... Rubber Tire Manufacturing ....................................................................................................... Secondary Aluminum Production ............................................................................................. Secondary Lead Smelting ......................................................................................................... Semiconductor Manufacturing .................................................................................................. Shipbuilding and Ship Repair (Surface Coating) ...................................................................... Site Remediation ....................................................................................................................... Solvent Extraction for Vegetable Oil Production ...................................................................... Steel Pickling— HCL Process Facilities and Hydrochloric Acid Regeneration Plants ............. Synthetic Organic Chemical Manufacturing— Hazardous Organic NESHAP—Tetrahydrobenzaldehyde Manufacture. 11/15/1997 5/15/1999 11/15/2000 8/29/2003 11/15/1994 NA 11/15/1995 10/15/1999 11/15/1994 NA 11/15/2000 2/28/2003 11/15/2000 2/28/2003 11/15/2000 2/28/2003 11/15/2000 NA 11/15/1997 12/15/1999 11/15/1994 NA 11/15/2000 2/28/2003 11/15/1994 NA 11/15/2000 8/29/2003 11/15/2000 NA 11/15/1997 05/15/1999 11/15/1992 NA Taconite Iron Ore Processing ................................................................................................... Wet-Formed Fiberglass Mat Production ................................................................................... VerDate jul<14>2003 16:26 Jun 29, 2005 Jkt 205001 PO 00000 Frm 00082 Fmt 4703 Sfmt 4703 11/15/2000 8/29/2003 11/15/2000 NA E:\FR\FM\30JNN1.SGM 30JNN1 Federal Register / Vol. 70, No. 125 / Thursday, June 30, 2005 / Notices 37827 TABLE 1.—CATEGORIES OF MAJOR SOURCES OF HAZARDOUS AIR POLLUTANTS AND REGULATION PROPOSAL AND PROMULGATION DATES—Continued [Revision Date: June 30, 2005.) Refer to http://www.epa.gov/ttn/atw/mactfnlalph.html for the listing of all regulatory actions for each individual rule and http://www.epa.gov/ttn/atw/socatlst/socatpg.html for previous notices on the source category list and revisions.] Statutory promulgation date court-ordered date Source category Wood Building Products (Surface Coating) .............................................................................. Wood Furniture (Surface Coating) ............................................................................................ Wool Fiberglass Manufacturing ................................................................................................ 11/15/2000 2/28/2003 11/15/1994 NA 11/15/1997 5/15/1999 FEDERAL REGISTER proposal and final citations and dates 67FR42400(P), 6/21/2002 68FR31746(F), 5/28/2003 58FR62652(P), 12/6/1994 60FR62930(F), 12/7/1995 62FR15228(P), 3/31/1997 64FR7149(SP), 2/12/1999 64FR31695(F), 6/14/1999 Legend: (P)—Proposal; (SP)—Supplementary Proposal; (F)—Final. [FR Doc. 05–12942 Filed 6–29–05; 8:45 am] SUPPLEMENTARY INFORMATION: BILLING CODE 6560–50–P Overview The following listing provides certain key information concerning the proposal opportunity. • Federal agency name: Environmental Protection Agency. • Funding opportunity title: Pesticide Environmental Stewardship Program (PESP) Regional Grants; Notice of Funds Availability. • Funding opportunity number: OPP– 006. • Announcement type: The initial announcement of a funding opportunity. • Catalog of Federal Domestic Assistance (CFDA) number: This program is included in the Catalog of Federal Domestic Assistance under number 66.714 at http://www.cfda.gov. • Dates: Applications must be postmarked by the U.S. Postal Service, hand delivered, or include official delivery service documentation indicating EPA Regional Office acceptance from a delivery service no later than August 15, 2005. ENVIRONMENTAL PROTECTION AGENCY [OPP–2005–0137; FRL–7715–3] Pesticide Environmental Stewardship Program (PESP) Regional Grants; Notice of Funds Availability Environmental Protection Agency (EPA). ACTION: Notice. AGENCY: SUMMARY: EPA’s Office of Pesticide Programs (OPP), in coordination with the EPA Regional Offices, is soliciting applications for projects that further the goals of the Pesticide Environmental Stewardship Program (PESP). Eligible applicants include the 50 States, District of Columbia, U.S. Virgin Islands, Commonwealth of Puerto Rico, any territory or possession of the United States, any agency or instrumentality of a State including State universities, and all federally recognized Tribes. Under this program, assistance agreements will provide financial support to eligible applicants to carry out projects that reduce the risks associated with pesticide use in agricultural and nonagricultural settings. The total amount of funding available for award in FY 2005 is expected to be approximately $470,000, with a maximum funding level of $47,000 per project. DATES: Submit your proposals in accordance with the detailed instructions in Unit IV.3. no later than August 15, 2005. ADDRESSES: Applications must be submitted to your EPA Regional PESP Coordinator listed in Unit VII. FOR FURTHER INFORMATION CONTACT: Your EPA Regional PESP Coordinator listed in Unit VII. VerDate jul<14>2003 16:26 Jun 29, 2005 Jkt 205001 I. Funding Opportunity Description A. Authority EPA expects to enter into assistance agreements under the authority of section 20 of the Federal Insecticide, Fungicide, and Rodenticide Act(FIFRA), 7 U.S.C. 136r, which authorizes the Agency to issue grants or cooperative agreements for research, public education, training, monitoring, demonstrations, and studies. Regulations governing these assistance agreements are found at 40 CFR part 30 for institutions of higher education, colleges and universities, and nonprofit organizations, and 40 CFR part 31 for States and local governments. In addition, the provisions in 40 CFR part 32, governing government wide debarment and suspension; and the PO 00000 Frm 00083 Fmt 4703 Sfmt 4703 provisions in 40 CFR part 34, regarding restrictions on lobbying apply. All costs incurred under this program must be allowable under the applicable OMB Cost Circulars: A–87 (States and local governments), A–122 (nonprofit organizations), or A–21 (universities). Copies of these circulars can be found athttp://www.whitehouse.gov/omb/ circulars/. In accordance with EPA policy and the OMB circulars, as appropriate, any recipient of funding must agree not to use assistance funds for lobbying, fund-raising, or political activities (e.g., lobbying members of Congress or lobbying for other Federal grants, cooperative agreements, or contracts). See 40 CFR part 34. B. Program Description 1. Purpose and scope. Assistance agreements awarded under this program are intended to provide financial assistance to eligible States and Tribal governments for projects that address pesticide risk reduction, integrated pest management (IPM), IPM in schools, children’s health issues related to pesticides, and those research methods for documenting IPM adoption or the reduction of risks associated with changes in pesticide use. Other projects will be considered as they complement these goals through public education, training, monitoring, demonstrations, and other activities. Emphasis will be placed on those projects with defined outcomes that can quantitatively document project impacts. Although the proposal may request funding for activities that will further long-term objectives, this program provides onetime funding, and the maximum period of performance for funded activities is expected to be not more than 24 months. 2. Activities to be funded. EPA specifically seeks to build IPM capacities or to evaluate the feasibility of new IPM approaches at the local level E:\FR\FM\30JNN1.SGM 30JNN1

Agencies

[Federal Register Volume 70, Number 125 (Thursday, June 30, 2005)]
[Notices]
[Pages 37819-37827]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 05-12942]


-----------------------------------------------------------------------

ENVIRONMENTAL PROTECTION AGENCY

[OAR-2002-0081; FRL-7930-5]
RIN 2060-AJ92


National Emission Standards for Hazardous Air Pollutants: 
Revision of Source Category List Under Section 112 of the Clean Air Act

AGENCY: Environmental Protection Agency (EPA).

ACTION: Notice of revisions to the list of major source categories.

-----------------------------------------------------------------------

SUMMARY: This action updates the list of major sources of hazardous air 
pollutants (HAP) emissions for which regulatory actions have been 
developed. The source category list is required under section 112(c) of 
the Clean Air Act (CAA) and was last published in the Federal Register 
on February 12, 2002.
    This action meets the requirement in section 112(c)(1) to publish 
from time to time, but no less often than every 8 years, a list of all 
major categories and subcategories of sources reflecting revisions 
since the list was last published. The revisions reflected in this 
notice have previously been published in actions associated with 
proposing and promulgating emission standards for individual source 
categories, and public comments have been requested in the context of 
those actions. This action does not include any revisions to the 
schedule for standards provided for by CAA section 112(e).

EFFECTIVE DATE: June 30, 2005.

ADDRESSES: EPA has established a docket for this action under Docket ID 
No. OAR-2002-0081. All documents in the docket are listed in the index. 
Publicly available docket materials are available for public inspection 
and copying between 8:30 a.m. and 4:30 p.m., Monday through Friday, 
excluding legal holidays. The docket is located at: U.S. EPA, Air and 
Radiation Docket and Information Center (6102T), 1301 Constitution 
Avenue, NW., Room B108, Washington, DC 20460, or by calling (202) 566-
1744 or 1742. A reasonable fee may be charged for copying docket 
materials.

FOR FURTHER INFORMATION CONTACT: Ms. Maria Noell, U.S. EPA, Office of 
Air Quality Planning and Standards (OAQPS), Organic Chemicals Group 
(C504-4), Research Triangle Park, North Carolina 27711, telephone 
number (919) 541-5607, facsimile number (919) 541-3470, electronic mail 
address noell.maria@epa.gov.

SUPPLEMENTARY INFORMATION: Docket. EPA has established an official 
public docket for this action under Docket ID No. OAR-2002-0081. The 
official public docket consists of the documents specifically 
referenced in this action, any public comments received, and other 
information related to this action. Although a part of the official 
docket, the public docket does not include Confidential Business 
Information or other information whose disclosure is restricted by 
statute. The official public docket is the collection of materials that 
is available for public viewing at the Office of Air and Radiation 
Docket and Information Center (Air Docket) in the EPA Docket Center, 
(EPA/DC) EPA West, Room B102, 1301 Constitution Avenue, NW., 
Washington, DC. The EPA Docket Center Public Reading Room is open from 
8:30 a.m. to 4:30 p.m., Monday through Friday, excluding legal 
holidays. The telephone number for the Reading Room is (202) 566-1744, 
and the telephone number for the Air Docket is (202) 566-1742.
    Electronic Docket Access. You may access this notice electronically 
through the EPA Internet under the Federal Register listings at http://
www.epa.gov/fedrgstr/.
    An electronic version of the public docket is available through 
EPA's electronic public docket and comment system, EPA Dockets. You may 
use EPA Dockets at http://www.epa.gov/edocket/ to view public 
documents, access the index listing of the contents of the official 
public docket, and to access those documents in the public docket that 
are available electronically. Although not all docket materials may be 
available electronically, you may still access any of the publicly 
available docket materials through the docket facility in the above 
paragraph entitled ``Docket.'' Once in the system, select ``search,'' 
then key in the appropriate docket identification number.
    Worldwide Web (WWW). In addition to being available in the docket, 
an electronic copy of today's notice will also be available on the WWW 
through the Technology Transfer Network (TTN). Following signature, a 
copy of the notice will be posted on the TTN's policy and guidance page 
for newly proposed or promulgated rules http://www.epa.gov/ttn/oarpg. 
The TTN provides information and technology exchange in various areas 
of air pollution control. If more information regarding the TTN is 
needed, call the TTN HELP line at (919) 541-5384.

I. What Is the History of the Source Category List?

    The CAA requires, under section 112, that EPA list all categories 
of major sources emitting HAP and such

[[Page 37820]]

categories of area sources warranting regulation and promulgate 
national emission standards for hazardous air pollutants (NESHAP) to 
control, reduce, or otherwise limit the emissions of HAP from such 
categories of major and area sources. Pursuant to the various specific 
listing requirements in section 112(c), on July 16, 1992 (57 FR 31576), 
we published a list of 174 categories of major and area sources--
referred to as the initial list--for which we would develop emission 
standards. On December 3, 1993 (58 FR 63941), pursuant to requirements 
in section 112(e), we published a schedule for the promulgation of 
emission standards for each of the 174 initially listed source 
categories.
    When we publish notices that affect actions relating to individual 
source categories, it is important to reflect the resultant changes on 
the list. We published five separate notices where we listed or removed 
sources for specific pollutants under section 112(c)(6) on April 10, 
1998 (63 FR 17838); and added area sources under section 112(k) on July 
19, 1999 (64 FR 38706); June 26, 2002 (67 FR 43112); November 8, 2002 
(67 FR 68124); and November 22, 2002 (67 FR 70427). On June 4, 1996 (61 
FR 28197), we published a notice that referenced all previous list and 
schedule changes and consolidated those actions, along with several new 
actions, into a revised source category list and schedule. 
Subsequently, we published five additional notices which updated the 
list and schedule: February 12, 1998 (63 FR 7155); May 17, 1999 (64 FR 
26743); November 18, 1999 (64 FR 63025); January 30, 2001 (66 FR 8220); 
and February 12, 2002 (67 FR 6521). You should read the previous 
notices for information relating to the development of the initial list 
and schedule and subsequent changes.

II. Why Is EPA Issuing This Notice?

    This notice announces the changes to the source category list that 
have occurred since we last updated the list on February 12, 2002 (67 
FR 6521).
    For general descriptions of source categories listed in Table 1, 
please refer to ``Documentation for Developing the Initial Source 
Category List'' (EPA-450/3-91-030) and the Federal Register notice for 
the first revision of the source category list and schedule (61 FR 
28197, June 4, 1996). For subsequent changes and/or amendments to the 
major source categories listed, please refer to: http://www.epa.gov/
ttn/atw/mactfnlalph.html.

III. What Are the Revisions EPA Is Making to the Source Category List?

A. Changes to Source Category Names

    The following source categories were renamed to better describe the 
source category:
    1. Amino Resins Production and Phenolic Resins Production are 
subsumed and renamed Amino/Phenolic Resins Production.
    2. Engine Test Facilities is renamed Engine Test Cells/Stands.
    3. Industrial Boilers is renamed Industrial/Commercial/
Institutional Boilers and Process Heaters.
    4. Printing, Coating, and Dyeing of Fabrics is renamed Printing, 
Coating, and Dyeing of Fabrics and Other Textiles.
    5. Refractories Manufacturing is renamed Refractory Products 
Manufacturing.

B. Division of a Source Category To Create Two New Source Categories

    The Brick and Structural Clay Products Manufacturing source 
category and the Clay Ceramics Manufacturing source category were 
separated and added to the list of categories of major sources. These 
newly created source categories are replacing the Clay Products 
Manufacturing source category, which was on the initial list of source 
categories to be regulated. For further information, you should refer 
to the proposed preamble to the NESHAP for Brick and Structural Clay 
Products Manufacturing and the NESHAP for Clay Ceramics Manufacturing 
(67 FR 47894, July 22, 2002), which serve as the official actions to 
add the source categories. These NESHAP were promulgated on May 16, 
2003 at 68 FR 26690.

C. Subsumptions of Source Categories

    Today's notice updates the source category list to reflect the 
following subsumptions:
1. Amino/Phenolic Resins Production
    Amino Resins and Phenolic Resins source categories were subsumed 
and renamed Amino/Phenolic Resins Production. The information obtained 
during the information gathering phase of the project demonstrated that 
the manufacturing processes, emission characteristics, and applicable 
control technologies for facilities in these two source categories are 
similar. Based on these factors, the EPA concluded that these two 
source categories are to be treated as a single source category. For 
further information, you should refer to the preamble to the proposed 
NESHAP for Manufacture of Amino/Phenolic Resins at 63 FR 68832 
(December 14, 1998), and the final NESHAP for Amino/Phenolic Resins 
Production at 65 FR 3275 (January 20, 2000) which serve as the official 
actions to rename and combine the source categories.
2. Engine Test Cells/Stands
    The Engine Test Facilities and Rocket Engine Tet Firing source 
categories were subsumed and renamed the Engine Test Cells/Stands 
source category. After gathering information about the source 
categories, we concluded that rocket testing facilities are similar in 
many respects to engine test cells/stands; therefore, we decided to 
regulate rocket engine test firing facilities as a subcategory of the 
Engine Test Cells/Stands source category. For further information, you 
should refer to the proposed preamble for the NESHAP for Engine Test 
Cells/Stands at 67 FR 34548 (May 14, 2002), and the final NESHAP for 
Engine Test Cells/Stands at 68 FR 28774 (May 27, 2003) which serve as 
the official actions to rename and combine the source categories.
3. Hydrochloric Acid Production
    The Fume Silica Production source category was subsumed into the 
Hydrochloric Acid Production source category. Originally, both 
hydrochloric acid production and fume silica production were listed 
separately as major sources under the production of inorganic chemicals 
group. In developing the respective NESHAP, it was learned that the 
primary source of HAP emissions in the two source categories was the 
same process. For further information, you should refer to the proposed 
preamble for the NESHAP for Hydrochloric Acid Production at 66 FR 48175 
(September 8, 2001), and the final NESHAP for Hydrochloric Acid 
Production at 68 FR 19076 (April 17, 2003) which serve as the official 
actions to combine the source categories.
4. Industrial/Commercial/Institutional Boilers and Process Heaters
    The Institutional/Commercial Boilers, the Process Heaters, and the 
Industrial Boiler source categories have been combined into the 
Industrial/Commercial/Institutional Boilers and Process Heaters source 
category. For further information, you should refer to the proposed 
preamble for the Industrial/Commercial/Institutional Boilers and 
Process Heaters NESHAP at 68 FR 1660 (January 13, 2003), and the final 
NESHAP for Industrial/Commercial/Institutional Boilers and Process 
Heaters at 69 FR 55218 (September 13, 2004) which serve as the

[[Page 37821]]

official actions to combine the source categories.
5. Iron and Steel Foundries
    The Iron Foundries and the Steel Foundries source categories have 
been combined into a new major source category called Iron and Steel 
Foundries. Since some facilities produce both iron castings and steel 
castings in the same foundry (i.e., using the same equipment), it is 
more sensible to have facilities subject to only one rule rather than 
two separate rules. For further information, you should refer to the 
proposed preamble for the NESHAP for Iron and Steel Foundries at 67 FR 
78274 (December 23, 2002), and the final NESHAP for Iron and Steel 
Foundries at 69 FR 21906 (April 22, 2004) which serve as the official 
actions to combine the source categories.
6. Surface Coating of Miscellaneous Metal Parts and Products
    The Asphalt/Coal Tar Application-Metal Pipes source category has 
been subsumed into the Surface Coating of Miscellaneous Metal Parts and 
Products source category. For further information, you should refer to 
the proposed preamble for the NESHAP for Surface Coating of 
Miscellaneous Metal Parts and Products at 67 FR 52780 (August 31, 
2002), and the final NESHAP for Surface Coating of Miscellaneous Metal 
Parts and Products at 69 FR 130 (January 2, 2004) which serve as the 
official actions to combine the source categories.
7. Miscellaneous Organic Chemical Manufacturing and Miscellaneous 
Coating Manufacturing
    The following source categories have been subsumed into the 
Miscellaneous Organic Chemical Manufacturing source category: 
benzyltrimethylammonium chloride production, carbonyl sulfide 
production, chelating agents production, chlorinated paraffins 
production, ethylidene norbornene production, explosives production, 
hydrazine production, photographic chemicals production, phthalate 
plasticizers production, rubber chemicals production, symmetrical 
tetrachloropyridine production, OBPA/1,3-diisocyanate production, alkyd 
resins production, polyester resins production, polyvinyl alcohol 
production, polyvinyl acetate emulsions production, polyvinylbutyral 
production, polymerized vinylidene chloride production, 
polymethylmethacrylate production, maleic anhydride copolymers 
production, ammonium sulfate production--caprolactam by-product plants, 
and quaternary ammonium compounds production. Along with these 22 
source categories, the Miscellaneous Organic Chemical Manufacturing 
source category was also defined to include other organic chemical 
manufacturing processes which are not being covered by any other 
maximum achievable control technology standards.
    The Manufacture of Paints, Coatings, and Adhesives source category 
has been subsumed into the Miscellaneous Coating Manufacturing source 
category. For further information, you should refer to the proposed 
preamble for the NESHAP for Miscellaneous Organic Chemical 
Manufacturing and Miscellaneous Coating Manufacturing at 67 FR 16154 
(April 4, 2002). The final NESHAP for Miscellaneous Organic Chemical 
Manufacturing was promulgated at 68 FR 63852 (November 10, 2003), and 
the final NESHAP for Miscellaneous Coating Manufacturing was 
promulgated at 68 FR 69164 (December 11, 2003). These final NESHAP 
serve as the official actions to combine and rename the source 
categories.

D. Changes to Source Category Designation

    In a final rule issued on March 29, 2005, at 70 FR 15994, EPA 
revised the regulatory finding that it issued in December 2000 pursuant 
to section 112(n)(1)(A) of the CAA and removed coal- and oil-fired 
electric utility steam generating units from the CAA section 112(c) 
source category list. EPA promulgated the Standards of Performance for 
New and Existing Stationary Sources: Electric Utility Steam Generating 
Units on March 15, 2005, under the authority of CAA section 111. 
Today's notice updates the source category list to reflect the March 29 
final action.
    Today's notice also serves as the official notice of our 
determination that currently there are no major sources with paint 
stripping operations whose operations are not already subject to other 
NESHAP. As a result, we are subsuming paint stripping operations into 
those other NESHAP. Paint stripping is a process that is invariably 
part of a larger process whose purpose is to prepare a surface for a 
new coating. The process of removing the old coat, preparing the 
surface, and applying a new one is, as we found, regulated by other 
NESHAP, and these NESHAP have already helped us significantly reduce 
emissions of HAP from major sources and satisfy our obligation under 
CAA section 112(d) to set standards for major sources in the paint 
stripping source category.
    The Paint Stripping Operations source category was listed for 
regulation under section 112(c) of the CAA. Paint stripping is defined, 
for purposes of rulemaking, as the removal of paint, or any other type 
of coating, using HAP-containing chemicals. Methylene chloride is the 
HAP that predominates in paint stripping operations. Major sources of 
paint stripping include facilities that use methylene chloride or other 
HAP to remove coatings from furniture, aircraft, metal parts, or any 
other type of component for purposes of preparing the surface for a new 
coating.
    To identify major sources of paint stripping operations, we engaged 
in a number of activities that helped us obtain information about the 
nature of the paint removal processes at a given facility and the 
associated HAP emissions. This process included searching emissions 
databases, such as the Atmospheric Information Retrieval System (AIRS), 
to find facilities with methylene chloride and any other types of 
facilities that perform paint removal. Even though we were able to 
identify many facilities with methylene chloride emissions, we found no 
unregulated major sources through this search that would be affected by 
paint stripping NESHAP. Our search included both free standing major 
sources and collocated sources. We identified several major sources 
that perform paint removal operations; however, these operations are 
already regulated under other surface coating NESHAP such as aerospace 
and wood furniture.
    We also reviewed the air permits and related information of 
potential paint stripping facilities with HAP emissions in several 
States. We requested the States of North Carolina, California, New 
York, Illinois, Texas, and Florida to provide us with lists of 
facilities that emit methylene chloride or any other HAP associated 
with paint removal processes. These States were a representative subset 
with relatively large numbers of facilities with reported methylene 
chloride emissions. Our information gathering and permit review effort 
with these States identified no major sources that would be potentially 
affected by a paint stripping NESHAP. Even though we identified several 
sources with paint stripping operations, either the operations were 
already covered by other NESHAP as listed below, or the sources were 
not major sources. Supporting documentation for these activities can be 
found in the ``Paint Stripping Operations'' docket (number A-99-42). 
The ADDRESSES section of this preamble

[[Page 37822]]

provides information on how to obtain copies of documents contained in 
the docket.

----------------------------------------------------------------------------------------------------------------
                                                                               FR publication date and citation
         Source category                  Status               Subpart              or contact information
----------------------------------------------------------------------------------------------------------------
Aerospace Industry...............  Final...............  GG                   09/01/95, 60FR45948
Large Appliance (Surface Coating)  Final...............  NNNN                 7/23/02, 67FR48253
Metal Furniture (Surface Coating)  Proposed............  RRRR                 04/24/02, 67FR20205
Misc. Metal Parts and Products     Proposed............  MMMM                 08/13/02, 67FR52799
 (Surface Coating).
Wood Furniture...................  Final...............  JJ                   12/07/95, 60FR62930
----------------------------------------------------------------------------------------------------------------

    There are, however, thousands of small paint stripping facilities 
that are not major sources and that release HAP emissions. These small 
facilities will be studied and potentially subject to rulemaking in the 
future as area sources.

IV. Is This Action Subject to Judicial Review?

    Section 112(e)(4) of the CAA states that, notwithstanding section 
307 of the CAA, no action of the Administrator listing a source 
category or subcategory under section 112(c) shall be a final Agency 
action subject to judicial review, except that any such action may be 
reviewed under section 307 when the Administrator issues emission 
standards for such pollutant or category. Section 112(e)(3) states that 
the determination of priorities for promulgation of standards for the 
listed source categories is not a rulemaking and is not subject to 
judicial review, except that failure to promulgate any standard 
pursuant to the schedule established under section 112(e) shall be 
subject to review under section 304 of the CAA. Therefore, today's 
notice is not subject to judicial review.

V. Is EPA Asking for Public Comment?

    Prior to issuance of the initial source category list, we published 
a draft initial list for public comment (56 FR 28548, June 21, 1991). 
Although we were not required to take public comment on the initial 
source category list, we believed it was useful to solicit input on a 
number of issues related to the list. Indeed, in most instances, even 
where there is no statutory requirement to take comment, we solicit 
public comments on actions we are contemplating. We have decided, 
however, that it is unnecessary to solicit additional public comment on 
the revisions reflected in today's action. Most of the changes 
discussed in this notice have been subject to comment in the MACT 
standard setting process.

VI. Statutory and Executive Order Reviews

    Today's action is not a rule; it is essentially an information 
sharing activity which does not impose regulatory requirements or 
costs. Therefore, the requirements of Executive Order 13045 (Protection 
of Children from Environmental Health Risks and Safety Risks), 
Executive Order 13084 (Consultation and Coordination with Indian Tribal 
Governments), Executive Order 13132 (Federalism), Executive Order 13211 
(Actions Concerning Regulations that Significantly Affect Energy 
Supply, Distribution or Use), the Regulatory Flexibility Act, the 
National Technology Transfer and Advancement Act, and the Unfunded 
Mandates Reform Act do not apply to today's notice. Also, this notice 
does not contain any information collection requirements and, 
therefore, is not subject to the Paperwork Reduction Act, 44 U.S.C. 
3501 et seq.
    Under Executive Order 12866 (58 FR 51735, October 4, 1993), a 
regulatory action determined to be ``significant'' is subject to the 
Office of Management and Budget (OMB) review and the requirements of 
the Executive Order. The Executive Order defines ``significant'' 
regulatory action as one that is likely to lead to a rule that may 
either (1) Have an annual effect on the economy of $100 million or 
more, or adversely affect a sector of the economy, productivity, 
competition, jobs, the environment, public health or safety, or State, 
local or tribal governments or communities; (2) create a serious 
inconsistency or otherwise interfere with an action taken or planned by 
another agency; (3) materially alter the budgetary impact of 
entitlements, grants, user fees, or loan programs or the rights and 
obligations of recipients thereof; or (4) raise novel legal or policy 
issues arising out of legal mandates, the President's priorities, or 
the principles set forth in the Executive Order.
    The OMB has determined that this action is not significant under 
the terms of Executive Order 12866.

    Dated: June 23, 2005.
Jeffrey R. Holmstead,
Assistant Administrator for Air and Radiation.

Table 1.--Categories of Major Sources of Hazardous Air Pollutants and Regulation Proposal and Promulgation Dates
  [Revision Date: June 30, 2005.) Refer to http://www.epa.gov/ttn/atw/mactfnlalph.html for the listing of all
 regulatory actions for each individual rule and http://www.epa.gov/ttn/atw/socatlst/socatpg.html for previous
                               notices on the source category list and revisions.]
----------------------------------------------------------------------------------------------------------------
                                      Statutory promulgation date  Federal Register proposal and final citations
           Source category                 court-ordered date                        and dates
----------------------------------------------------------------------------------------------------------------
Aerospace Industries................  11/15/1994                   59FR29216(P), 6/6/1994
                                      N/A                          60FR45956(F), 9/1/1995
Asphalt Processing and Asphalt        11/15/2000                   66FR58610(P), 11/21/2001
 Roofing Manufacturing.               2/28/2003                    68FR24562(F), 5/7/2003
Auto and Light Duty Truck (Surface    11/15/2000                   67FR78612(P), 12/24/2002
 Coating).                            2/28/2004                    69FR22601(F), 4/26/2004
Boat Manufacturing..................  11/15/2000                   65FR43842(P), 7/14/2000
                                      NA                           66FR44218(F), 8/22/2001

[[Page 37823]]

 
Brick and Structural Clay Products    11/15/2000                   67FR47894(P), 7/22/2002
 Manufacturing.                       2/28/2003                    68FR26690(F), 5/16/2003
Cellulose Products Manufacturing....  11/15/2000                   65FR52166(P), 8/28/2000
                                      NA                           67FR40044(F), 6/11/2002
-------------------------------------
Cellulose Ethers Production:
     Methyl Cellulose
     Carboxymethylcellulose
     Cellulose Ethers
Miscellaneous Viscose Processes:
     Cellulose Food Casing
     Rayon
     Cellulosic Sponge
     Cellophane
----------------------------------------------------------------------------------------------------------------
Chemical Recovery Combustion Sources  11/15/1997                   63FR18754(P), 4/15/1998
 at Kraft, Soda, Sulfite and Stand-   ...........................  66FR3180(F), 1/12/2001
 Alone Semi-Chemical Pulp Mills--     12/15/2000                   .............................................
 MACT II.
Chromium Electroplating.............  11/15/1994                   58FR65768(P), 12/16/1993
                                      NA                           60FR4948(F), 1/25/1995
-------------------------------------
     Chromic Acid Anodizing
     Decorative Acid
     Hard Chromium Electroplating
----------------------------------------------------------------------------------------------------------------
Clay Ceramics Ceramics Manufacturing  11/15/2000                   67FR47894(P), 7/22/2002
                                      2/28/2003                    68FR26690(F), 5/16/2003
Coke Ovens: Charging, Top Side and    12/31/1992                   57FR57534(P), 12/4/1992
 Door Leaks.                          NA                           58FR57898(F), 10/27/1993
Coke Ovens: Pushing, Quenching and    11/15/2000                   66FR35326(P), 7/3/2001
 Battery Stacks.                      2/28/2003                    68FR18008(F), 4/14/2003
Combustion Turbines.................  11/15/2000                   68FR1888(P), 1/13/2003
                                      8/29/2003                    69FR10512(F), 3/5/2004
Commercial Sterilizers..............  11/15/1994                   59FR10591(P), 3/7/1994
                                      NA                           59FR62585(F), 12/6/1994
Dry Cleaning........................  11/15/1992                   56FR64382(P), 12/9/1991
                                      NA                           58FR49354(F), 9/22/1993
-------------------------------------
     Commercial Dry Cleaning Dry-to-Dry
     Commercial Dry Cleaning Transfer Machines
     Industrial Dry Cleaning Dry-to-Dry
     Industrial Dry Cleaning Transfer Machines
----------------------------------------------------------------------------------------------------------------
Engine Test Cells/Stands............  11/15/2000                   67FR34548(P), 5/14/2002
                                      2/28/2003                    68FR28774(F), 5/27/2003
Fabric Printing, Coating, and Dyeing  11/15/2000                   67FR46028(P), 7/11/2002
                                      2/28/2003                    68FR32172(F), 5/29/2003
Ferroalloys Production:               11/15/1997                   63FR41509(P), 8/4/1998
 Silicomanganese and Ferromanganese.  5/15/1999                    64FR7149(SP), 2/12/1999
                                                                   64FR27450(F), 5/20/1999
Flexible Polyurethane Foam            11/15/2000                   66FR41718(P), 8/8/2001
 Fabrication Operations.              2/28/2003                    68FR18062(F), 4/14/2003
Flexible Polyurethane Foam            11/15/1997                   61FR68406(P), 12/27/1996
 Production.                          NA                           63FR53980(F), 10/7/1998
Friction Materials Manufacturing....  11/15/2000                   66FR50768(P), 10/4/2001
                                      NA                           67FR64498(F), 10/18/2002
Gasoline Distribution (Stage 1).....  11/15/1994                   59FR5868(P), 2/8/1994
                                      NA                           59FR64303(F), 12/14/1994
Generic MACT I......................  11/15/1997                   63FR55178(P), 10/14/1998
                                      5/15/1999                    64FR34854(F), 6/29/1999
-------------------------------------

[[Page 37824]]

 
     Acetal Resins Production
     Acrylic Fibers/Modacrylic Fibers Production
     Hydrogen Fluoride Production
     Polycarbonates Production
----------------------------------------------------------------------------------------------------------------
Generic MACT II.....................  11/15/2000                   65FR76408(P), 12/67/2000
                                      NA                           67FR46258(F), 7/12/2002
-------------------------------------
     Carbon Black Production
     Spandex Production
     Cyanide Chemicals Manufacturing
     Ethylene Processes
----------------------------------------------------------------------------------------------------------------
Hazardous Waste Combustors Phase I..  11/15/2000                   61FR17358(P), 4/19/1996
                                                                   64FR52828(F), 9/30/1999
    Phase II........................  NA                           69FR21198(P), 4/20/2004
Hydrochloric Acid Production........  11/15/2000                   66FR48174(P), 9/18/2001
                                      2/28/2003                    68FR19076(F), 4/17/2003
Industrial/Commercial/Institutional   11/15/2000                   68FR1660(P), 2/26/2004
 Boilers and Process Heaters.         2/27/2004                    69FR55218(F), 9/13/2004
Industrial Process Cooling Towers...  11/15/1994                   58FR43028(P), 8/12/1993
                                      NA                           59FR46339(F), 9/8/1994
Integrated Iron and Steel             11/15/2000                   66FR36836(P), 7/13/2001
 Manufacturing.                       2/28/2003                    68FR27645(F), 5/20/2003
Iron and Steel Foundries............  11/15/2000                   67FR78274(P), 12/23/2002
                                      8/29/2003                    69FR21905(F), 4/22/2004
Large Appliance (Surface Coating)...  11/15/2000                   65FR81134(P), 12/22/2000
                                      NA                           67FR48254(F), 7/23/2002
Leather Finishing Operations........  11/15/2000                   65FR58702(P), 10/2/2000
                                      NA                           67FR9156(F), 2/27/2002
Lime Manufacturing..................  11/15/2000                   67FR78046(P), 12/20/2002
                                      8/29/2003                    69FR394(F), 1/5/2004
Magnetic Tapes (Surface Coating)....  11/15/1994                   59FR11662(P), 3/11/1994
                                      NA                           59FR64580(F), 12/15/1994
Manufacturing of Nutritional Yeast..  11/15/2000                   63FR55812(P), 10/19/1998
                                      NA                           64FR27876(F), 5/21/2001
Marine Vessel Loading Operations....  11/15/1997                   59FR25004(P), 5/13/1994
                                      NA                           60FR48388(F), 9/19/1995
Metal Can (Surface Coating).........  11/15/2000                   68FR2110(P), 1/15/2003
                                      8/29/2003                    68FR64432(F), 11/13/2003
Metal Coil (Surface Coating)........  11/15/2000                   65FR44616(P), 7/18/2000
                                      NA                           67FR39794(F), 6/10/2002
Metal Furniture (Surface Coating)...  11/15/2000                   67FR20206(P), 4/24/2002
                                      2/28/2003                    68FR28606(F), 5/23/2003
Mineral Wool Production.............  11/15/1997                   62FR25370(P), 5/8/1997
                                      5/15/1999                    64FR7149(SP), 2/12/1999
                                                                   64FR29490(F), 6/1/1999
Miscellaneous Coatings Manufacturing  11/15/2000                   67FR16154(P), 4/4/2002
                                      8/29/2003                    68FR69164(F), 12/11/2003
Miscellaneous Metal Parts and         11/15/2000                   67FR52780(P), 8/13/2002
 Products (Surface Coating).          8/29/2003                    69FR130(F), 1/2/2004
Miscellaneous Organic Chemical        11/15/2000                   67FR16154(P), 4/4/2002
 Manufacturing.                       8/29/2003                    68FR63852(F), 11/10/2003
-------------------------------------

[[Page 37825]]

 
     Alkyd Resins
     Ammonium Sulfate Production-Caprolactum By-Products
     Benzyltrimethylammonium Chloride
     Carbonyl Sulfide
     Chelating Agents
     Chlorinated Paraffins
     Ethylidene Norbornene
     Explosives
     Hydrazine
     Maleic Anhydride Copolymers
     OBPA/1, 3-Diisocyanate
     Photographic Chemicals
     Phthalate Plasticizers
     Polyester Resins
     Polymerized Vinylidene Chloride
     Polymethyl Methacrylate Resins
     Polyvinyl Acetate Emulsions
     Polyvinyl Alcohol
     Polyvinyl Butyral
     Quaternary Ammonium Compounds
     Rubber Chemicals
     Symmetrical Tetrachloropyridine
----------------------------------------------------------------------------------------------------------------
Municipal Solid Waste Landfills.....  11/15/2000                   65FR66672(P), 11/7/2000
                                      NA                           67FR36459(SP), 5/23/2002
                                                                   68FR2227(F), 1/16/2003
Off-Site Waste and Receovery          11/15/1994                   59FR51913(P), 10/13/1994
 Operations.                          NA                           61FR34140(F), 7/1/1996
Oil and Natural Gas Production......  11/14/1997                   63FR6288(P), 2/6/1998
                                      5/15/1999                    64FR32610(F), 6/17/1999
Organic Liquids Distribution (Non-    11/15/2000                   67FR15674(P), 4/2/2002
 Gasoline).                           8/29/2003                    69FR5038(F), 2/3/2004
Paper and Other Web (Surface          11/15/2000                   65FR55332(P), 9/13/2000
 Coating).                            NA                           67FR72330(F), 12/4/2002
Pesticide Active Ingredient           11/15/1997                   62FR60566(P), 10/10/1997
 Production.                          5/15/1999                    64FR33549(F), 6/23/1999
Petroleum Refineries--Catalytic       11/15/1997                   63FR48890(P), 9/11/1998
 Cracking Units, Catalytic Reforming  5/15/1999                    67FR17762(F), 4/11/2002
 Units, and Sulfur Recovery Units.
Petroleum Refineries--Other Sources   11/15/1994                   59FR36130(P), 7/15/1994
 Not Distinctly Listed.               NA                           60FR43244(F), 8/18/1995
Pharmaceuticals Productions.........  11/15/1997                   62FR15753(P), 4/2/1997
                                      NA                           63FR50280(F), 9/21/1998
Phosphate Fertilizers Production and  11/15/1997                   61FR68430(P), 12/27/1996
 Phosphoric Acid Manufacturing.       5/15/1999                    64FR31358(F), 6/10/1999
Plastic Parts and Products (Surface   11/15/2000                   67FR72276(P), 12/4/2002
 Coating).                            8/29/2003                    69FR20967(F), 4/19/2004
Plywood and Composite Wood Products.  11/15/2000                   68FR1276(P), 1/9/2003
                                      2/28/2004                    69FR45944(F), 7/30/2004
Polyether Polyols Production........  11/15/1997                   62FR46804(P), 9/4/1997
                                      5/15/1999                    64FR19420(F), 6/1/1999
Polymers and Resins.................  11/15/1994                   60FR30801(P), 6/12/1995
                                      NA                           61FR46906(F), 9/5/1996
-------------------------------------
     Butyl Rubber
     Epichlorohydrin Elastomers
     Ethylene-Propylene Rubber
     Hypalon (tm)
     Neoprene
     Nitrile Butadiene Rubber
     Polybutadiene Rubber
     Polysulfide Rubber
     Styrene-Butadiene Rubber and Latex
----------------------------------------------------------------------------------------------------------------
Polymers and Resins II..............  11/15/1994                   59FR25387(P), 5/16/1994
                                      NA                           60FR12670(F), 3/8/1995
-------------------------------------

[[Page 37826]]

 
     Epoxy Resins
     Non-Nylon Polyamides
----------------------------------------------------------------------------------------------------------------
Polymers and Resins III--Amino/       11/15/1997                   63FR68832(P), 12/14/1998
 Phenolic Resins.                     12/15/1999                   65FR3276(F), 1/20/2000
Polymers and Resins IV..............  11/15/1994                   60FR16090(P), 3/29/1995
                                      NA                           61FR48208(F), 9/12/1996
-------------------------------------
     Acrylonitrile-Butadiene-Styrene
     Methyl Methacrylate-Acrylonitrile-Butadiene-Styrene
     Methyl Methacrylate-Butadiene-Styrene Terpolymers
     Nitrile Resins
     Polyethylene Terephthalate
     Polystyrene
     Styrene-Acrylonitrile
----------------------------------------------------------------------------------------------------------------
Polyvinyl Chloride and Copolymers     11/15/2000                   65FR76958(P), 12/6/2000
 Production.                          NA                           67FR45886(F), 7/10/2002
Portland Cement Manufacturing.......  11/15/1997                   63FR14182(P), 3/24/1998
                                      5/15/1999                    64FR31897(F), 6/14/1999
Primary Aluminum Production.........  11/15/1997                   61FR188(P), 9/26/1996
                                      NA                           62FR52383(F), 10/07/1997
Primary Copper Smelting.............  11/15/1997                   63FR19582(P), 4/20/1998
                                      5/15/1999                    65FR39326(SP), 6/26/2000
                                                                   67FR40477(F), 6/12/2002
Primary Lead Smelting...............  11/15/1997                   63FR19200(P), 4/17/1998
                                      5/15/1999                    64FR30194(F), 6/4/1999
Primary Magnesium Refining..........  11/15/2000                   68FR2970(P), 1/22/2003
                                      8/29/2003                    68FR58615(F), 10/10/2003
Printing and Publishing (Surface      11/15/1994                   60FR13664(P), 3/14/1995
 Coating).                            NA                           61FR27132(F), 5/30/1996
Publicly Owned Treatment Works......  11/15/1995                   63FR66084(P), 12/1/1998
                                      10/15/1999                   64FR57572(F), 10/26/1999
Pulp and Paper Production (MACT I     11/15/1994                   58FR66078(P), 12/17/1993
 and III).                            NA                           63FR18504(F), 4/15/1998
Reciprocating Internal Combustion     11/15/2000                   67FR77830(P), 12/19/2002
 Engines.                             2/28/2003                    69FR33474(F), 6/15/2004
Refractory Products Manufacturing...  11/15/2000                   68FR42108(P), 6/20/2002
                                      2/28/2003                    68FR18730(F), 4/16/2003
Reinforced Plastic Composites         11/15/2000                   66FR40324(P), 8/2/2001
 Production.                          2/28/2003                    68FR19375(F), 4/21/2003
Rubber Tire Manufacturing...........  11/15/2000                   65FR62414(P), 10/18/2000
                                      NA                           67FR45588(F), 7/9/2002
Secondary Aluminum Production.......  11/15/1997                   63FR6946(P), 2/11/1999
                                      12/15/1999                   65FR15689(F), 3/23/2000
Secondary Lead Smelting.............  11/15/1994                   59FR63941(P), 6/9/1994
                                      NA                           60FR32587(F), 6/23/1995
Semiconductor Manufacturing.........  11/15/2000                   67FR30848(P), 5/8/2002
                                      2/28/2003                    68FR27913(F), 5/22/2003
Shipbuilding and Ship Repair          11/15/1994                   59FR62681(P), 12/6/1994
 (Surface Coating).                   NA                           60FR64330(F), 12/15/1995
Site Remediation....................  11/15/2000                   67FR49398(P), 7/30/2002
                                      8/29/2003                    68FR58172(F), 10/8/2003
Solvent Extraction for Vegetable Oil  11/15/2000                   65FR34251(P), 5/26/2000
 Production.                          NA                           66FR19006(F), 4/12/2001
Steel Pickling-- HCL Process          11/15/1997                   62FR49051(P), 9/18/1997
 Facilities and Hydrochloric Acid     05/15/1999                   64FR33202(F), 6/22/1999
 Regeneration Plants.
Synthetic Organic Chemical            11/15/1992                   57FR62608(P), 12/31/1992
 Manufacturing-- Hazardous Organic    ...........................  59FR19402(F), 4/22/1994
 NESHAP--Tetrahy-drobenzaldehyde
 Manufacture.
                                      NA                           62FR44614(P), 8/22/1999
                                                                   63FR26078(F), 5/12/1998
Taconite Iron Ore Processing........  11/15/2000                   67FR77562(P), 12/18/2002
                                      8/29/2003                    68FR61868(F), 10/30/2003
Wet-Formed Fiberglass Mat Production  11/15/2000                   65FR34278(P), 5/26/2000
                                      NA                           67FR17824(F), 4/11/2002

[[Page 37827]]

 
Wood Building Products (Surface       11/15/2000                   67FR42400(P), 6/21/2002
 Coating).                            2/28/2003                    68FR31746(F), 5/28/2003
Wood Furniture (Surface Coating)....  11/15/1994                   58FR62652(P), 12/6/1994
                                      NA                           60FR62930(F), 12/7/1995
Wool Fiberglass Manufacturing.......  11/15/1997                   62FR15228(P), 3/31/1997
                                      5/15/1999                    64FR7149(SP), 2/12/1999
                                                                   64FR31695(F), 6/14/1999
----------------------------------------------------------------------------------------------------------------
Legend: (P)--Proposal; (SP)--Supplementary Proposal; (F)--Final.

[FR Doc. 05-12942 Filed 6-29-05; 8:45 am]
BILLING CODE 6560-50-P