National Emission Standards for Hazardous Air Pollutants: Miscellaneous Coating Manufacturing, 25684-25686 [05-9486]

Agencies

• ENVIRONMENTAL PROTECTION AGENCY

[Federal Register Volume 70, Number 92 (Friday, May 13, 2005)]
[Proposed Rules]
[Pages 25684-25686]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 05-9486]



Federal Register / Vol. 70, No. 92 / Friday, March 13, 2005 / 
Proposed Rules

[[Page 25684]]


-----------------------------------------------------------------------

ENVIRONMENTAL PROTECTION AGENCY

40 CFR Part 63

[OAR-2003-0178; FRL-7911-2]
RIN 2060-AM72


National Emission Standards for Hazardous Air Pollutants: 
Miscellaneous Coating Manufacturing

AGENCY: Environmental Protection Agency (EPA).

ACTION: Proposed rule; amendments.

-----------------------------------------------------------------------

SUMMARY: On December 11, 2003, EPA promulgated national emission 
standards for hazardous air pollutants (NESHAP) for miscellaneous 
coating manufacturing. This action proposes amending the NESHAP by 
providing additional compliance options and clarifications. 
Specifically, this action proposes an option to demonstrate compliance 
with a percent reduction emission limit by measuring total organic 
compounds (TOC), an option to demonstrate compliance with the weight 
percent hazardous air pollutant (HAP) limit in coatings products based 
on formulation data, and a change to the process vessel standards to 
allow the cover or lid on a process vessel to be opened for material 
additions and sampling. Other proposed amendments are clarifications of 
the requirements for cleaning operations, the compliance date for 
equipment that is added to an existing source, the conditions under 
which you must determine whether an emission stream is a halogenated 
vent stream, and the terminology used to describe the emission limits 
for process vessels. This action also proposes a revised definition of 
Group 2 transfer operations to clarify that all product loading 
operations are part of the miscellaneous coating manufacturing affected 
source and, thus, are not subject to the organic liquid distribution 
(OLD) NESHAP.
    In the Rules and Regulations section of this Federal Register, we 
are taking direct final action on the proposed amendments because we 
view the amendments as noncontroversial and anticipate no adverse 
comments. We have explained our reasons for the amendments in the 
preamble to the direct final rule. If we receive no adverse comments, 
we will take no further action on the proposed amendments. If we 
receive adverse comments, we will withdraw only those provisions on 
which we received adverse comments. We will publish a timely withdrawal 
in the Federal Register indicating which provisions will become 
effective and which provisions are being withdrawn. If part or all of 
the direct final rule in the Rules and Regulations section of today's 
Federal Register is withdrawn, all comments pertaining to the withdrawn 
provisions will be addressed in a subsequent final rule based on the 
proposed amendments. We will not institute a second comment period 
before taking the subsequent final action. Any parties interested in 
commenting must do so at this time.

DATES: Comments. Written comments must be received on or before June 
13, 2005 unless a hearing is requested by May 23, 2005. If a hearing is 
requested, written comments must be received on or before June 27, 
2005.
    Public Hearing. If anyone contacts the EPA requesting to speak at a 
public hearing, a public hearing will be held on May 27, 2005.

ADDRESSES: Submit your comments, identified by Docket ID No. OAR-2003-
0178, by one of the following methods:
     Federal eRulemaking Portal: https://www.regulations.gov. 
Follow the on-line instructions for submitting comments.
     Agency Web site: https://www.epa.gov/edocket. EDOCKET, 
EPA's electronic public docket and comment system, is EPA's preferred 
method for receiving comments. Follow the on-line instructions for 
submitting comments.
     E-mail: air-and-r-docket@epa.gov.
     Fax: (202) 566-1741.
     Mail: EPA Docket Center, Environmental Protection Agency, 
Mailcode: 6102T, 1200 Pennsylvania Avenue, NW., Washington, DC 20460. 
Please include a duplicate copy, if possible.
     Hand Delivery: Air and Radiation Docket, Environmental 
Protection Agency, 1301 Constitution Avenue, NW., Room B-108, 
Washington, DC 20460. Such deliveries are only accepted during the 
Docket's normal hours of operation, and special arrangements should be 
made for deliveries of boxed information.
    We request that a separate copy also be sent to the contact person 
listed below (see FOR FURTHER INFORMATION CONTACT).
    Instructions: Direct your comments to Docket ID No. OAR-2003-0178. 
EPA's policy is that all comments received will be included in the 
public docket without change and may be made available online at http:/
/www.epa.gov/edocket, including any personal information provided, 
unless the comment includes information claimed to be Confidential 
Business Information (CBI) or other information whose disclosure is 
restricted by statute. Do not submit information that you consider to 
be CBI or otherwise protected through EDOCKET, regulations.gov, or e-
mail. The EPA EDOCKET and the federal regulations.gov websites are 
``anonymous access'' systems, which means EPA will not know your 
identity or contact information unless you provide it in the body of 
your comment. If you send an e-mail comment directly to EPA without 
going through EDOCKET or regulations.gov, your e-mail address will be 
automatically captured and included as part of the comment that is 
placed in the public docket and made available on the Internet. If you 
submit an electronic comment, EPA recommends that you include your name 
and other contact information in the body of your comment and with any 
disk or CD-ROM you submit. If EPA cannot read your comment due to 
technical difficulties and cannot contact you for clarification, EPA 
may not be able to consider your comment. Electronic files should avoid 
the use of special characters, any form of encryption, and be free of 
any defects or viruses. For additional information about EPA's public 
docket visit EDOCKET on-line or see the Federal Register of May 31, 
2002 (67 FR 38102).
    Docket: All documents in the docket are listed in the EDOCKET index 
at https://www.epa.gov/edocket. Although listed in the index, some 
information is not publicly available, i.e., CBI or other information 
whose disclosure is restricted by statute. Certain other material, such 
as copyrighted material, is not placed on the Internet and will be 
publicly available only in hard copy form. Publicly available docket 
materials are available either electronically in EDOCKET or in hard 
copy at the Air and Radiation Docket, EPA/DC, EPA West, Room B102, 1301 
Constitution Ave., NW., Washington, DC. The Public Reading Room is open 
from 8:30 a.m. to 4:30 p.m., Monday through Friday, excluding legal 
holidays. The telephone number for the Public Reading Room is (202) 
566-1744, and the telephone number for the Air Docket is (202) 566-
1742.
    Public Hearing. If a public hearing is held, it will be held at 10 
a.m. at the EPA's Environmental Research Center Auditorium, Research 
Triangle Park, North Carolina or at an alternate site nearby.

FOR FURTHER INFORMATION CONTACT: Mr. Randy McDonald, Organic Chemicals 
Group, Emission Standards Division (C504-04), Office of Air Planning 
and Standards, U.S. EPA, Research Triangle Park, North Carolina 27711, 
telephone

[[Page 25685]]

number (919) 541-5402, electronic mail address mcdonald.randy@epa.gov.

SUPPLEMENTARY INFORMATION: Regulated Entities. The regulated category 
and entities affected by this action include:

----------------------------------------------------------------------------------------------------------------
                   Category                        NAICS\*\              Examples of regulated entities
----------------------------------------------------------------------------------------------------------------
Industry......................................            3255  Manufacturers of coatings, including inks,
                                                                 paints, or adhesives.
----------------------------------------------------------------------------------------------------------------
* North American Industrial Classification System

    This table is not intended to be exhaustive, but rather provides a 
guide for readers likely to be interested in the revisions to the rule 
affected by this action. To determine whether your facility, company, 
business, organization, etc., is regulated by this action, you should 
carefully examine all of the applicability criteria in 40 CFR 63.7985, 
as well as in today's proposed amendments to the applicability 
sections. If you have questions regarding the applicability of the 
amendments to a particular entity, consult the person listed in the 
preceding FOR FURTHER INFORMATION CONTACT section.

What Should I Consider as I Prepare My Comments for EPA?

    Submitting CBI. Do not submit this information to EPA through 
EDOCKET, regulations.gov or e-mail. Clearly mark the part or all of the 
information that you claim to be CBI. For CBI information in a disk or 
CD ROM that you mail to EPA, mark the outside of the disk or CD ROM as 
CBI and then identify electronically within the disk or CD ROM the 
specific information that is claimed as CBI). In addition to one 
complete version of the comment that includes information claimed as 
CBI, a copy of the comment that does not contain the information 
claimed as CBI must be submitted for inclusion in the public docket. 
Information so marked will not be disclosed except in accordance with 
procedures set forth in 40 CFR part 2.
    Tips for Preparing Your Comments. When submitting comments, 
remember to:
     Identify the rulemaking by docket number and other 
identifying information (subject heading, Federal Register date and 
page number).
     Follow directions--The agency may ask you to respond to 
specific questions or organize comments by referencing a Code of 
Federal Regulations (CFR) part or section number.
     Explain why you agree or disagree; suggest alternatives 
and substitute language for your requested changes.
     Describe any assumptions and provide any technical 
information and/or data that you used.
     If you estimate potential costs or burdens, explain how 
you arrived at your estimate in sufficient detail to allow for it to be 
reproduced.
     Provide specific examples to illustrate your concerns, and 
suggest alternatives.
     Explain your views as clearly as possible, avoiding the 
use of profanity or personal threats.
     Make sure to submit your comments by the comment period 
deadline identified.
    Public Hearing. Persons interested in presenting oral testimony or 
inquiring as to whether a hearing is to be held should contact Mr. 
Randy McDonald, Organic Chemicals Group, Emission Standards Division 
(Mail Code C504-04), U.S. EPA, Research Triangle Park, North Carolina 
27711, telephone number (919) 541-5402, electronic mail address 
mcdonald.randy@epa.gov., at least 2 days in advance of the potential 
date of the public hearing. Persons interested in attending the public 
hearing must also call Mr. Randy McDonald to verify the time, date, and 
location of the hearing. The public hearing will provide interested 
parties the opportunity to present data, views, or arguments concerning 
these proposed emission standards.
    Worldwide Web (WWW). In addition to being available in the docket, 
an electronic copy of today's proposal will also be available through 
the WWW. Following the Administrator's signature, a copy of this action 
will be posted on EPA's Technology Transfer Network (TTN) policy and 
guidance page for newly proposed or promulgated rules https://
www.epa.gov/ttn/oarpg. The TTN at EPA's web site provides information 
and technology exchange in various areas of air pollution control. If 
more information regarding the TTN is needed, call the TTN HELP line at 
(919) 541-5384.
    Direct Final Rule. A direct final rule identical to the proposal is 
published in the Rules and Regulations section of today's Federal 
Register. If we receive any adverse comment pertaining to the 
amendments, we will publish a timely notice in the Federal Register 
informing the public that the amendments are being withdrawn due to 
adverse comment. We will address all public comments concerning the 
withdrawn amendments in a subsequent final rule. If no relevant adverse 
comments are received, no further action will be taken on the proposal 
and the direct final rule will become effective as provided in that 
action.
    The regulatory text for the proposal is identical to that for the 
direct final rule published in the Rules and Regulations section of 
today's Federal Register. For further supplementary information, the 
detailed rationale for the proposal and the regulatory revisions, see 
the direct final rule published in the Rules and Regulations section of 
today's Federal Register.

Statutory and Executive Order Reviews

    For a complete discussion of all administrative requirements 
applicable to this section, see the direct final rule in Rules and 
Regulations section of today's Federal Register.

Regulatory Flexibility Act

    The Regulatory Flexibility Act (RFA) generally requires an agency 
to prepare a regulatory flexibility analysis of any rule subject to 
notice and comment rulemaking requirements under the Administrative 
Procedure Act or any other statute unless the agency certifies that the 
rule will not have a significant economic impact on a substantial 
number of small entities. Small entities include small businesses, 
small organizations, and small governmental jurisdictions.
    For purposes of assessing the impacts of today's proposed 
amendments on small entities, a small entity is defined as: (1) A small 
business having up to 500 employees; (2) a small governmental 
jurisdiction that is a government of a city, county, town, school 
district or special district with a population of less than 50,000; and 
(3) a small organization that is any not-for-profit enterprise which is 
independently owned and operated and is not dominant in its field.
    After considering the economic impacts of today's proposed 
amendments on small entities, I certify that this action will not have 
a significant economic impact on a substantial number of small 
entities. In determining whether a proposed rule has a significant 
economic impact on a substantial number of small entities, the

[[Page 25686]]

impact of concern is any significant adverse economic impact, since the 
primary purpose of the regulatory flexibility analysis is to identify 
and address regulatory alternatives ``which minimize any significant 
economic impact of the proposed rule on small entities' (5 U.S.C. 
sections 603 and 604). Thus, any agency may certify that a rule will 
not have a significant economic impact on a substantial number of small 
entities if the rule relieves regulatory burden or otherwise has a 
positive economic effect on all of the small entities subject to the 
rule. The proposed amendments grant greater flexibility to small 
entities subject to the final rule that may result in a more efficient 
use of resources for them and, therefore, impose no additional 
regulatory costs or requirements on owners or operators of affected 
sources. The EPA continues to be interested in the potential impacts of 
the proposed rule on small entities and welcomes comments on issues 
related to such impacts.

List of Subjects in 40 CFR Part 63

    Environmental protection, Administrative practice and procedure, 
Air pollution control, Hazardous substances, Intergovernmental 
relations, Reporting and recordkeeping requirements.

    Dated: May 6, 2005.
Stephen L. Johnson,
Administrator.
[FR Doc. 05-9486 Filed 5-12-05; 8:45 am]
BILLING CODE 6560-50-P