Notice of Petitions by Producing Firms for Determination of Eligibility To Apply for Trade Adjustment Assistance, 22842-22843 [05-8755]
Download as PDF
<![CDATA[
22842
Federal Register / Vol. 70, No. 84 / Tuesday, May 3, 2005 / Notices
supporting the designation of California
Grain, three comments supporting the
designation of California Agri, and two
comments supporting the designation of
Imperial by the closing date.
GIPSA evaluated all available
information regarding the designation
criteria in section 7(f)(l)(A) of the Act
and, according to section 7(f)(l)(B),
determined that Farwell Southwest and
California Agri are better able to provide
official services in the portions of the
geographic area specified below. The
geographic area specified in this
document includes additional area for
which Farwell Southwest and California
Agri applied, as both applicants
indicated they would be willing to
accept more or less area in order to
provide needed services to all
requestors, and it was GIPSA’s desire to
designate the entire State.
Effective May 16, 2005, and
terminating March 31, 2008, concurrent
with their present designation, Farwell
Southwest is designated, pursuant to
section (7)(2) of the Act, for the
following geographic area:
Bounded on the north by the northern
San Luis Obispo, Kings, Fresno, Merced,
Madera, and Inyo County lines east to
the California State line;
Bounded on the east by the eastern
California State line south to the
southern California State line;
Bounded on the south by the southern
California State line west to the western
California State line;
Bounded on the west by the western
California State line north to the
northern San Luis Obispo County line,
excluding those export port locations
served by GIPSA.
Interested persons may obtain official
services by calling Farwell Southwest’s
headquarters in Casa Grande, Arizona,
at telephone number 520–421–1027.
Effective June 1, 2005, and
terminating December 31, 2006,
California Agri is designated, pursuant
to section (7)(2) of the Act, in the
following geographic area:
Bounded on the north by the
California State line east to the eastern
California State line;
Bounded on the east by the eastern
California State line south to the
southern Mono County line;
Bounded on the south by the southern
Mono, Tuolumne, Mariposa, Stanislaus,
Santa Clara, San Benito, and Monterey
County lines west to the western
California State line;
Bounded on the west by the western
California State line north to the
northern California State line, excluding
those export port locations served by
GIPSA.
Interested persons may obtain official
services by calling California Agri’s
headquarters in West Sacramento,
California, at telephone number 916–
375–5809.
Authority: Pub. L. 94–582, 90 Stat. 2867,
as amended (7 U.S.C. 71 et seq.).
David Orr,
Acting Administrator, Grain Inspection,
Packers and Stockyards Administration.
[FR Doc. 05–8814 Filed 5–2–05; 8:45 am]
BILLING CODE 3410–EN–P
DEPARTMENT OF COMMERCE
Economic Development Administration
Notice of Petitions by Producing Firms
for Determination of Eligibility To
Apply for Trade Adjustment
Assistance
Economic Development
Administration (EDA).
ACTION: Notice and request for
comments.
AGENCY:
Petitions have been accepted for filing
on the dates indicated from the firms
listed below.
LIST OF PETITION ACTION BY TRADE ADJUSTMENT ASSISTANCE FOR PERIOD MARCH 26, 2005–APRIL 27, 2005
Date petition
accepted
Firm name
Address
American Injection Molding Co., Inc ......
Growers Co-Operative Grape Co., Inc ..
121 Nixon Street, Cascade, IA 52033 ..
112 North Portage Street, Westfield,
NY 14787.
1133 Barranca Drive, El Paso, TX
79935.
584 West Girard Road, Union City, MI
49094.
Isabella Foods, Inc .................................
Millwork Engineering and Crafts, Inc.,
dba The Craft Room and A Gift for
the Home.
Misty Fjord Seafood, Inc ........................
Mold Threads, Inc ..................................
Haldex Brake Corporation ......................
Scan Pac Manufacturing, Inc .................
D8, Inc ....................................................
Hamel Manufacturing .............................
Industrial Modification & Repair .............
Norton Sound Economic Development
Corporation dba Norton Sound Seafood Products.
VerDate jul<14>2003
15:43 May 02, 2005
Jkt 205001
Product
04/06/2005
04/06/2005
Injection molded plastic components.
Concord grape juice concentrate.
04/06/2005
Frozen pastries.
04/06/2005
Pictures, designs, photographs, and
plaques for framing and mounting,
and wooden frames for art work, pictures and photographs.
Crab.
Injection molds and injection molded
parts.
Brake actuators.
125 Main Street, Ketchikan, AK 99901
21 West End Avenue, Branford, CT
05405.
10930 North Pomona Avenue, Kansas
City, MO 64153.
N 84 W 13510 Leon Road,
Menomonee Falls, WI 53051.
04/06/2005
04/06/2005
1293 East Freeze Road, Potlatch, ID
83855.
2815 River Road Drive, Waterloo, NE
68069.
04/13/2005
4067 Hardwick Street, Lakewood, CA
90714.
420 L Street, Anchorage, AK 99501 .....
04/15/2005
Mechanical appliances for projecting,
dispersing or spraying liquids or powers.
Aircraft parts.
04/27/2005
Crabs.
E:\FR\FM\03MYN1.SGM
03MYN1
PO 00000
Frm 00002
Fmt 4703
Sfmt 4703
04/12/2005
04/12/2005
04/15/2005
Non-asbestos friction material of rubber, zinc, fiberglass, and/or plastic
molded into clutch components, and
woven friction material of nylon cotton, and glass.
Molds.
Federal Register / Vol. 70, No. 84 / Tuesday, May 3, 2005 / Notices
The petitions were submitted
pursuant to section 251 of the Trade Act
of 1974 (19 U.S.C. 2341). Consequently,
the United States Department of
Commerce has initiated separate
investigations to determine whether
increased imports into the United States
of articles like or directly competitive
with those produced by each firm
contributed importantly to total or
partial separation of the firm’s workers,
or threat thereof, and to a decrease in
sales or production of each petitioning
firm. Any party having a substantial
interest in the proceedings may request
a public hearing on the matter. A
request for a hearing must be received
by Office of Strategic Initiatives, Room
7812, Economic Development
Administration, U.S. Department of
Commerce, Washington, DC 20230, no
later than the close of business of the
tenth calendar day following the
publication of this notice. The Catalog
of Federal Domestic Assistance official
program number and title of the
program under which these petitions are
submitted is 11.313, Trade Adjustment
Assistance.
FOR FURTHER INFORMATION CONTACT:
Martha Douthit at (202) 482–5050 or
Hilary Sadler, Esq. at (202) 482–4340,
Import Administration, International
Trade Administration, U.S. Department
of Commerce, 14th Street & Constitution
Avenue, NW., Washington, DC 20230.
SUPPLEMENTARY INFORMATION:
Extension of Final Results:
On January 3, 2005, the Department
initiated sunset reviews of the
antidumping and countervailing duty
orders on CTL plate from France, India,
Indonesia, Italy, Japan and Korea. See
Initiation of Five-year (Sunset) Reviews,
70 FR 75 (January 3, 2005). Based on
adequate responses from the domestic
interested parties and inadequate
responses from respondent interested
parties, the Department is conducting
expedited sunset reviews to determine
whether revocation of the antidumping
and countervailing duty orders on CTL
plate would lead to the continuation or
recurrence of dumping or a
countervailable subsidy. The
Department’s final results of these
reviews were scheduled for May 3,
2005; however, the Department needs
Dated: April 27, 2005.
additional time for its analysis.
Anthony J. Meyer,
In accordance with section
Senior Program Analyst, Office of Strategic
751(c)(5)(B) of the Tariff Act of 1930, as
Initiatives.
amended (‘‘the Act’’), the Department
[FR Doc. 05–8755 Filed 5–2–05; 8:45 am]
may extend the period of time for
BILLING CODE 3510–24–P
making its final determination in a
sunset review by not more than 90 days,
if it determines that the review is
DEPARTMENT OF COMMERCE
extraordinarily complicated. As set forth
in 751(c)(5)(C), the Department may,
International Trade Administration
among other reasons, treat a sunset
[A–427–816, A–533–817, C–533–818, A–560– review as extraordinarily complicated if:
805, C–560–806, A–475–826, C–475–827, A–
(i) There are a large number of issues,
588–847, A–580–836, C–580–837]
(ii) the issues to be considered are
Certain Cut–To-Length Carbon–Quality complex or (iii) there are a large number
of firms involved. In these proceedings,
Steel Plate from France, India,
one or more of these reasons apply.
Indonesia, Italy, Japan and Korea;
Specifically, the sunset reviews of the
Extension of Final Results of
four countervailing duty orders on CTL
Expedited Sunset Reviews of the
plate contain a large number of complex
Antidumping and Countervailing Duty
issues, including privatization, directed
Orders
credit and section 129 implementation,
AGENCY: Import Administration,
while the sunset reviews of the six
International Trade Administration,
antidumping duty orders include
Department of Commerce
complex issues related to the
SUMMARY: The Department of Commerce appropriate margins likely to prevail if
(‘‘the Department’’) is extending the
the orders were revoked and, in some
time limit for its final results in the
instances, involve a large number of
expedited sunset reviews of the
companies. The Department has
antidumping and countervailing duty
determined, pursuant to section
orders on certain cut–to-length carbon–
751(c)(5)(C) of the Act that the sunset
quality steel plate (‘‘CTL plate’’) from
reviews of the antidumping and
France, India, Indonesia, Italy, Japan
countervailing duty orders of CTL plate
and Korea. As a result of this extension, from France, India, Indonesia, Italy,
the Department intends to issue final
Japan and Korea are extraordinarily
results of this sunset review on or about complicated and require additional time
August 1, 2005.
for the Department to complete its
analysis. Therefore, the Department will
EFFECTIVE DATE: May 3, 2005.
VerDate jul<14>2003
15:43 May 02, 2005
Jkt 205001
PO 00000
Frm 00003
Fmt 4703
Sfmt 4703
22843
extend the deadlines in these
proceedings, and, as a result, intends to
issue the final results of the sunset
reviews of the antidumping and
countervailing duty orders of CTL plate
from France, India, Indonesia, Italy,
Japan and Korea on or about August 1,
2005, 90 days from the original
scheduled date of the final results of
these reviews. This notice is issued and
published in accordance with sections
751(c)(5)(B) and (C) of the Act.
Dated: April 25, 2005.
Barbara E. Tillman,
Acting Deputy Assistant Secretary for Import
Administration.
[FR Doc. E5–2143 Filed 5–2–05; 8:45 am]
BILLING CODE 3510–DS–S
DEPARTMENT OF COMMERCE
International Trade Administration
Notice of Change in Practice
Regarding Upcoming Sunset Reviews
Import Administration,
International Trade Administration,
Department of Commerce.
AGENCY:
Notification of Upcoming
Sunset Reviews—Change in Practice.
ACTION:
Every five years, pursuant to section
751(c) of the Tariff Act of 1930, as
amended (the Act), the Department of
Commerce (the Department)
automatically initiates and conducts
reviews to determine whether
revocation of a countervailing or
antidumping duty order or termination
of an investigation suspended under
section 704 or 734 of the Act would be
likely to lead to continuation or
recurrence of dumping or a
countervailable subsidy and of material
injury. In conjunction with this activity,
the Department’s practice has been to
notify, in advance, by certified or
registered mail, all persons on the
service list for each proceeding subject
to a sunset review of the approximate
date of publication in the Federal
Register of the automatic initiation of
the sunset review. This notification is
not required by statute but is done as a
service to the international trading
community.
The Department is announcing its
intention to discontinue this practice.
Instead, beginning with sunset reviews
initiated in June 2005, the Department
will provide this advance notification of
upcoming sunset reviews through a
monthly notice published in the Federal
Register. This notice of upcoming
sunset reviews will be published in the
month prior to the month of initiation.
E:\FR\FM\03MYN1.SGM
03MYN1
]]>Agencies
[Federal Register Volume 70, Number 84 (Tuesday, May 3, 2005)]
[Notices]
[Pages 22842-22843]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 05-8755]
=======================================================================
-----------------------------------------------------------------------
DEPARTMENT OF COMMERCE
Economic Development Administration
Notice of Petitions by Producing Firms for Determination of
Eligibility To Apply for Trade Adjustment Assistance
AGENCY: Economic Development Administration (EDA).
ACTION: Notice and request for comments.
-----------------------------------------------------------------------
Petitions have been accepted for filing on the dates indicated from
the firms listed below.
List of Petition Action by Trade Adjustment Assistance for Period March 26, 2005-April 27, 2005
----------------------------------------------------------------------------------------------------------------
Date petition
Firm name Address accepted Product
----------------------------------------------------------------------------------------------------------------
American Injection Molding Co., Inc.... 121 Nixon Street, 04/06/2005 Injection molded plastic
Cascade, IA 52033. components.
Growers Co-Operative Grape Co., Inc.... 112 North Portage Street, 04/06/2005 Concord grape juice
Westfield, NY 14787. concentrate.
Isabella Foods, Inc.................... 1133 Barranca Drive, El 04/06/2005 Frozen pastries.
Paso, TX 79935.
Millwork Engineering and Crafts, Inc., 584 West Girard Road, 04/06/2005 Pictures, designs,
dba The Craft Room and A Gift for the Union City, MI 49094. photographs, and plaques
Home. for framing and
mounting, and wooden
frames for art work,
pictures and
photographs.
Misty Fjord Seafood, Inc............... 125 Main Street, 04/06/2005 Crab.
Ketchikan, AK 99901.
Mold Threads, Inc...................... 21 West End Avenue, 04/06/2005 Injection molds and
Branford, CT 05405. injection molded parts.
Haldex Brake Corporation............... 10930 North Pomona 04/12/2005 Brake actuators.
Avenue, Kansas City, MO
64153.
Scan Pac Manufacturing, Inc............ N 84 W 13510 Leon Road, 04/12/2005 Non-asbestos friction
Menomonee Falls, WI material of rubber,
53051. zinc, fiberglass, and/or
plastic molded into
clutch components, and
woven friction material
of nylon cotton, and
glass.
D8, Inc................................ 1293 East Freeze Road, 04/13/2005 Molds.
Potlatch, ID 83855.
Hamel Manufacturing.................... 2815 River Road Drive, 04/15/2005 Mechanical appliances for
Waterloo, NE 68069. projecting, dispersing
or spraying liquids or
powers.
Industrial Modification & Repair....... 4067 Hardwick Street, 04/15/2005 Aircraft parts.
Lakewood, CA 90714.
Norton Sound Economic Development 420 L Street, Anchorage, 04/27/2005 Crabs.
Corporation dba Norton Sound Seafood AK 99501.
Products.
----------------------------------------------------------------------------------------------------------------
[[Page 22843]]
The petitions were submitted pursuant to section 251 of the Trade
Act of 1974 (19 U.S.C. 2341). Consequently, the United States
Department of Commerce has initiated separate investigations to
determine whether increased imports into the United States of articles
like or directly competitive with those produced by each firm
contributed importantly to total or partial separation of the firm's
workers, or threat thereof, and to a decrease in sales or production of
each petitioning firm. Any party having a substantial interest in the
proceedings may request a public hearing on the matter. A request for a
hearing must be received by Office of Strategic Initiatives, Room 7812,
Economic Development Administration, U.S. Department of Commerce,
Washington, DC 20230, no later than the close of business of the tenth
calendar day following the publication of this notice. The Catalog of
Federal Domestic Assistance official program number and title of the
program under which these petitions are submitted is 11.313, Trade
Adjustment Assistance.
Dated: April 27, 2005.
Anthony J. Meyer,
Senior Program Analyst, Office of Strategic Initiatives.
[FR Doc. 05-8755 Filed 5-2-05; 8:45 am]
BILLING CODE 3510-24-P
