Airworthiness Directives; Dornier Model 328-100 Series Airplanes, 21344-21346 [05-8271]

Download as PDF 21344 Federal Register / Vol. 70, No. 79 / Tuesday, April 26, 2005 / Proposed Rules Use the following format when preparing your comments: • Organize your comments issue-byissue. • For each issue, state what specific change you are requesting to the proposed policy. • Include justification, reasons, or data for each change you are requesting. We also welcome comments in support of the proposed policy We will consider all communications received on or before the closing date for comments. We may change the proposed policy because of the comments received. Background The purpose of the proposed policy memorandum is to clarify FAA certification policy of the acceptable substantiation methods used to provide protection under § 25.562(a) when meeting the performance standards in § 25.562(c) for ‘‘front row’’ seats. Front row seats are those seats which are located directly aft of a partition, monument, or other commodity, including all passenger seats not considered ‘‘row-to-row.’’ The policy is not directed toward other seats. The FAA has determined that the proposed policy provides an acceptable means of protection for front row occupants. Issued in Renton, Washington, on March 25, 2005. Ali Bahrami, Manager, Transport Airplane Directorate, Aircraft Certification Service. [FR Doc. 05–8136 Filed 4–25–05; 8:45 am] BILLING CODE 4910–13–M DEPARTMENT OF TRANSPORTATION Federal Aviation Administration 14 CFR Part 39 [Docket No. FAA–2005–21053; Directorate Identifier 2005–NM–053–AD] RIN 2120–AA64 Airworthiness Directives; Dornier Model 328–100 Series Airplanes Federal Aviation Administration (FAA), Department of Transportation (DOT). ACTION: Notice of proposed rulemaking (NPRM). AGENCY: SUMMARY: The FAA proposes to adopt a new airworthiness directive (AD) for all Dornier Model 328–100 series airplanes. This proposed AD would require modifying the electrical wiring of the fuel pumps; installing insulation at the hand flow control and shut-off valves, VerDate jul<14>2003 15:27 Apr 25, 2005 Jkt 205001 and other components of the environmental control system; and installing markings at fuel wiring harnesses. This proposed AD also would require revising the Airworthiness Limitations section of the Instructions for Continued Airworthiness to incorporate new inspections of the fuel tank system. This proposed AD is prompted by the results of fuel system reviews conducted by the airplane manufacturer. We are proposing this AD to reduce the potential of ignition sources inside fuel tanks, which, in combination with flammable fuel vapors, could result in fuel tank explosions and consequent loss of the airplane. DATES: We must receive comments on this proposed AD by May 26, 2005. ADDRESSES: Use one of the following addresses to submit comments on this proposed AD. • DOT Docket Web site: Go to https://dms.dot.gov and follow the instructions for sending your comments electronically. • Government-wide rulemaking Web site: Go to https://www.regulations.gov and follow the instructions for sending your comments electronically. • Mail: Docket Management Facility, U.S. Department of Transportation, 400 Seventh Street, SW., Nassif Building, room PL–401, Washington, DC 20590. • By fax: (202) 493–2251. • Hand Delivery: Room PL–401 on the plaza level of the Nassif Building, 400 Seventh Street, SW., Washington, DC, between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. For service information identified in this proposed AD, contact AvCraft Aerospace GmbH, P.O. Box 1103, D– 82230 Wessling, Germany. You can examine the contents of this AD docket on the Internet at https:// dms.dot.gov, or in person at the Docket Management Facility, U.S. Department of Transportation, 400 Seventh Street, SW., room PL–401, on the plaza level of the Nassif Building, Washington DC. This docket number is FAA–2005– 21053; the directorate identifier for this docket is 2005–NM–053–AD. FOR FURTHER INFORMATION CONTACT: Dan Rodina, Aerospace Engineer, International Branch, ANM–116, FAA, Transport Airplane Directorate, 1601 Lind Avenue, SW., Renton, Washington 98055–4056; telephone (425) 227–2125; fax (425) 227–1149. SUPPLEMENTARY INFORMATION: Comments Invited We invite you to submit any relevant written data, views, or arguments regarding this proposed AD. Send your PO 00000 Frm 00003 Fmt 4702 Sfmt 4702 comments to an address listed under Include ‘‘Docket No. FAA– 2005–21053; Directorate Identifier 2005–NM–053–AD’’ at the beginning of your comments. We specifically invite comments on the overall regulatory, economic, environmental, and energy aspects of the proposed AD. We will consider all comments submitted by the closing date and may amend the proposed AD in light of those comments. We will post all comments we receive, without change, to https:// dms.dot.gov, including any personal information you provide. We will also post a report summarizing each substantive verbal contact with FAA personnel concerning this proposed AD. Using the search function of our docket Web site, anyone can find and read the comments in any of our dockets, including the name of the individual who sent the comment (or signed the comment on behalf of an association, business, labor union, etc.). You can review the DOT’s complete Privacy Act Statement in the Federal Register published on April 11, 2000 (65 FR 19477–78), or you can visit https:// dms.dot.gov. ADDRESSES. Examining the Docket You can examine the AD docket on the Internet at https://dms.dot.gov, or in person at the Docket Management Facility office between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. The Docket Management Facility office (telephone (800) 647–5227) is located on the plaza level of the Nassif Building at the DOT street address stated in the ADDRESSES section. Comments will be available in the AD docket shortly after the DMS receives them. Discussion The FAA has examined the underlying safety issues involved in recent fuel tank explosions on several large transport airplanes, including the adequacy of existing regulations, the service history of airplanes subject to those regulations, and existing maintenance practices for fuel tank systems. As a result of those findings, we issued a regulation titled ‘‘Transport Airplane Fuel Tank System Design Review, Flammability Reduction and Maintenance and Inspection Requirements’’ (67 FR 23086, May 7, 2001). In addition to new airworthiness standards for transport airplanes and new maintenance requirements, this rule included Special Federal Aviation Regulation No. 88 (‘‘SFAR 88,’’ Amendment 21–78, and subsequent Amendments 21–82 and 21–83). E:\FR\FM\26APP1.SGM 26APP1 Federal Register / Vol. 70, No. 79 / Tuesday, April 26, 2005 / Proposed Rules Among other actions, SFAR 88 requires certain type design (i.e., type certificate (TC) and supplemental type certificate (STC)) holders to substantiate that their fuel tank systems can prevent ignition sources in the fuel tanks. This requirement applies to type design holders for large turbine-powered transport airplanes and for subsequent modifications to those airplanes. It requires them to perform design reviews and to develop design changes and maintenance procedures if their designs do not meet the new fuel tank safety standards. As explained in the preamble to the rule, we intended to adopt airworthiness directives to mandate any changes found necessary to address unsafe conditions identified as a result of these reviews. In evaluating these design reviews, we have established four criteria intended to define the unsafe conditions associated with fuel tank systems that require corrective actions. The percentage of operating time during which fuel tanks are exposed to flammable conditions is one of these criteria. The other three criteria address the failure types under evaluation: Single failures, single failures in combination with another latent condition(s), and in-service failure experience. For all four criteria, the evaluations included consideration of previous actions taken that may mitigate the need for further action. The Joint Aviation Authorities (JAA) has issued a regulation that is similar to SFAR 88. (The JAA is an associated body of the European Civil Aviation Conference (ECAC) representing the civil aviation regulatory authorities of a number of European States who have agreed to co-operate in developing and implementing common safety regulatory standards and procedures.) Under this regulation, the JAA stated that all members of the ECAC that hold type certificates for transport category airplanes are required to conduct a design review against explosion risks. We have determined that the actions identified in this AD are necessary to reduce the potential of ignition sources inside fuel tanks, which, in combination with flammable fuel vapors, could result in fuel tank explosions and consequent loss of the airplane. In light of these findings, the Luftfahrt-Bundesamt (LBA), which is the airworthiness authority for Germany, issued German airworthiness directive D–2005–001, dated January 26, 2005, to address the unsafe condition previously described on Dornier Model 328–100 series airplanes. VerDate jul<14>2003 15:27 Apr 25, 2005 Jkt 205001 Relevant Service Information The airplane manufacturer has issued Dornier Service Bulletin SB–328–00– 445, dated August 23, 2004. The service bulletin describes procedures for: • Modifying the electrical wiring of the left-hand and right-hand fuel pumps, which includes installing new supports, wet-installing plugs, and torquing and securing nuts; • Installing insulation at the left-hand and right-hand flow control and shut-off valves, and other components of the environmental control system (i.e., cross bleed valve; and temperature control valve and cold air unit of the environmental control unit; and bleed air inlet), which includes replacing the existing flex joint covers of the bleed air ducts with new covers; • Installing markings at fuel wiring harnesses; and • Amending the Airworthiness Limitations Document. Accomplishing the actions specified in the service information is intended to adequately address the unsafe condition. The LBA mandated the service information to ensure the continued airworthiness of these airplanes in Germany. FAA’s Determination and Requirements of the Proposed AD This airplane model is manufactured in Germany and is type certificated for operation in the United States under the provisions of section 21.29 of the Federal Aviation Regulations (14 CFR 21.29) and the applicable bilateral airworthiness agreement. Pursuant to this bilateral airworthiness agreement, the LBA has kept the FAA informed of the situation described above. We have examined the LBA’s findings, evaluated all pertinent information, and determined that we need to issue an AD for products of this type design that are certificated for operation in the United States. Therefore, we are proposing this AD, which would require accomplishing the actions specified in the service information described previously. This proposed AD also would require revising the Airworthiness Limitations section of the Instructions for Continued Airworthiness to incorporate new inspections of the fuel tank system. Costs of Compliance This proposed AD would affect about 6 airplanes of U.S. registry. The proposed actions would take about 70 work hours per airplane, at an average labor rate of $65 per work hour. Required parts would cost about $14,118 per airplane. Based on these PO 00000 Frm 00004 Fmt 4702 Sfmt 4702 21345 figures, the estimated cost of the proposed AD for U.S. operators is $112,008, or $18,668 per airplane. Authority for This Rulemaking Title 49 of the United States Code specifies the FAA’s authority to issue rules on aviation safety. Subtitle I, Section 106, describes the authority of the FAA Administrator. Subtitle VII, Aviation Programs, describes in more detail the scope of the Agency’s authority. We are issuing this rulemaking under the authority described in Subtitle VII, Part A, Subpart III, Section 44701, ‘‘General requirements.’’ Under that section, Congress charges the FAA with promoting safe flight of civil aircraft in air commerce by prescribing regulations for practices, methods, and procedures the Administrator finds necessary for safety in air commerce. This regulation is within the scope of that authority because it addresses an unsafe condition that is likely to exist or develop on products identified in this rulemaking action. Regulatory Findings We have determined that this proposed AD would not have federalism implications under Executive Order 13132. This proposed AD would not have a substantial direct effect on the States, on the relationship between the national Government and the States, or on the distribution of power and responsibilities among the various levels of government. For the reasons discussed above, I certify that the proposed regulation: 1. Is not a ‘‘significant regulatory action’’ under Executive Order 12866; 2. Is not a ‘‘significant rule’’ under the DOT Regulatory Policies and Procedures (44 FR 11034, February 26, 1979); and 3. Will not have a significant economic impact, positive or negative, on a substantial number of small entities under the criteria of the Regulatory Flexibility Act. We prepared a regulatory evaluation of the estimated costs to comply with this proposed AD. See the ADDRESSES section for a location to examine the regulatory evaluation. List of Subjects in 14 CFR Part 39 Air transportation, Aircraft, Aviation safety, Safety. The Proposed Amendment Accordingly, under the authority delegated to me by the Administrator, the FAA proposes to amend 14 CFR part 39 as follows: E:\FR\FM\26APP1.SGM 26APP1 21346 Federal Register / Vol. 70, No. 79 / Tuesday, April 26, 2005 / Proposed Rules PART 39—AIRWORTHINESS DIRECTIVES 1. The authority citation for part 39 continues to read as follows: Authority: 49 U.S.C. 106(g), 40113, 44701. § 39.13 [Amended] 2. The FAA amends § 39.13 by adding the following new airworthiness directive (AD): Fairchild Dornier GmbH (Formerly Dornier Luftfahrt GmbH): Docket No. FAA– 2005–21053; Directorate Identifier 2005– NM–053–AD. Comments Due Date (a) The Federal Aviation Administration must receive comments on this AD action by May 26, 2005. Affected ADs (b) None. Applicability (c) This AD applies to all Dornier Model 328–100 series airplanes, certificated in any category. Unsafe Condition (d) This AD was prompted by the results of fuel system reviews conducted by the airplane manufacturer. We are issuing this AD to reduce the potential of ignition sources inside fuel tanks, which, in combination with flammable fuel vapors, could result in fuel tank explosions and consequent loss of the airplane. Compliance (e) You are responsible for having the actions required by this AD performed within the compliance times specified, unless the actions have already been done. Modification and Installations (f) Within 12 months after the effective date of this AD, do the actions in Table 1 of this AD in accordance with the Accomplishment Instructions of Dornier Service Bulletin SB–328–00–445, dated August 23, 2004. TABLE 1.—REQUIREMENTS Do the following actions— (1) Modify the electrical wiring of the left-hand and right-hand fuel pumps. (2) Install insulation at the left-hand and right-hand flow control and shut-off valves, and other components of the environmental control system. (3) Install markings at fuel wiring harnesses. VerDate jul<14>2003 15:27 Apr 25, 2005 By accomplishing all the actions specified in— Paragraph 2.B(1) of the service bulletin. Paragraph 2.B(2) of the service bulletin. Paragraph 2.B(3) of the service bulletin. Jkt 205001 Revision to Airworthiness Limitations (g) Within 12 months after the effective date of this AD, revise the Airworthiness Limitations section of the Instructions for Continued Airworthiness by inserting a copy of Dornier Temporary Revision TR ALD–080, dated October 15, 2003, into the Dornier 328 Airworthiness Limitations Document. Thereafter, except as provided in paragraph (h) of this AD, no alternative inspection intervals may be approved for this fuel tank system. Alternative Methods of Compliance (AMOCs) (h) The Manager, International Branch, ANM–116, Transport Airplane Directorate, FAA, has the authority to approve AMOCs for this AD, if requested in accordance with the procedures found in 14 CFR 39.19. Related Information (i) German airworthiness directive D– 2005–001, dated January 26, 2005, also addresses the subject of this AD. Issued in Renton, Washington, on April 18, 2005. Ali Bahrami, Manager, Transport Airplane Directorate, Aircraft Certification Service. [FR Doc. 05–8271 Filed 4–25–05; 8:45 am] BILLING CODE 4910–13–P DEPARTMENT OF TRANSPORTATION Federal Aviation Administration 14 CFR Part 39 [Docket No. FAA–2005–21054; Directorate Identifier 2005–NM–054–AD] RIN 2120–AA64 Airworthiness Directives; Dornier Model 328–300 Series Airplanes Federal Aviation Administration (FAA), Department of Transportation (DOT). ACTION: Notice of proposed rulemaking (NPRM). AGENCY: SUMMARY: The FAA proposes to adopt a new airworthiness directive (AD) for certain Dornier Model 328–300 series airplanes. This proposed AD would require modifying the electrical wiring of the fuel pumps; installing insulation at the flow control and shut-off valves, and other components of the environmental control system; installing markings at fuel wiring harnesses; replacing the wiring harness of the auxiliary fuel system with a new wiring harness; and installing insulated couplings in the fuel system; as applicable. This proposed AD also would require revising the Airworthiness Limitations section of the Instructions for Continued Airworthiness to incorporate new PO 00000 Frm 00005 Fmt 4702 Sfmt 4702 inspections of the fuel tank system. This proposed AD is prompted by the results of fuel system reviews conducted by the airplane manufacturer. We are proposing this AD to reduce the potential of ignition sources inside fuel tanks, which, in combination with flammable fuel vapors, could result in fuel tank explosions and consequent loss of the airplane. DATES: We must receive comments on this proposed AD by May 26, 2005. ADDRESSES: Use one of the following addresses to submit comments on this proposed AD. • DOT Docket Web site: Go to https://dms.dot.gov and follow the instructions for sending your comments electronically. • Government-wide rulemaking Web site: Go to https://www.regulations.gov and follow the instructions for sending your comments electronically. • Mail: Docket Management Facility, U.S. Department of Transportation, 400 Seventh Street, SW., Nassif Building, room PL–401, Washington, DC 20590. • By fax: (202) 493–2251. • Hand Delivery: Room PL–401 on the plaza level of the Nassif Building, 400 Seventh Street, SW., Washington, DC, between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. For service information identified in this proposed AD, contact AvCraft Aerospace GmbH, PO Box 1103, D– 82230 Wessling, Germany. You can examine the contents of this AD docket on the Internet at https:// dms.dot.gov, or in person at the Docket Management Facility, U.S. Department of Transportation, 400 Seventh Street, SW., room PL–401, on the plaza level of the Nassif Building, Washington, DC. This docket number is FAA–2005– 21054; the directorate identifier for this docket is 2005–NM–054–AD. FOR FURTHER INFORMATION CONTACT: Dan Rodina, Aerospace Engineer, International Branch, ANM–116, FAA, Transport Airplane Directorate, 1601 Lind Avenue, SW., Renton, Washington 98055–4056; telephone (425) 227–2125; fax (425) 227–1149. SUPPLEMENTARY INFORMATION: Comments Invited We invite you to submit any relevant written data, views, or arguments regarding this proposed AD. Send your comments to an address listed under ADDRESSES. Include ‘‘Docket No. FAA– 2005–21054; Directorate Identifier 2005–NM–054–AD’’ at the beginning of your comments. We specifically invite comments on the overall regulatory, economic, environmental, and energy aspects of the proposed AD. We will E:\FR\FM\26APP1.SGM 26APP1

Agencies

[Federal Register Volume 70, Number 79 (Tuesday, April 26, 2005)]
[Proposed Rules]
[Pages 21344-21346]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 05-8271]


-----------------------------------------------------------------------

DEPARTMENT OF TRANSPORTATION

Federal Aviation Administration

14 CFR Part 39

[Docket No. FAA-2005-21053; Directorate Identifier 2005-NM-053-AD]
RIN 2120-AA64


Airworthiness Directives; Dornier Model 328-100 Series Airplanes

AGENCY: Federal Aviation Administration (FAA), Department of 
Transportation (DOT).

ACTION: Notice of proposed rulemaking (NPRM).

-----------------------------------------------------------------------

SUMMARY: The FAA proposes to adopt a new airworthiness directive (AD) 
for all Dornier Model 328-100 series airplanes. This proposed AD would 
require modifying the electrical wiring of the fuel pumps; installing 
insulation at the hand flow control and shut-off valves, and other 
components of the environmental control system; and installing markings 
at fuel wiring harnesses. This proposed AD also would require revising 
the Airworthiness Limitations section of the Instructions for Continued 
Airworthiness to incorporate new inspections of the fuel tank system. 
This proposed AD is prompted by the results of fuel system reviews 
conducted by the airplane manufacturer. We are proposing this AD to 
reduce the potential of ignition sources inside fuel tanks, which, in 
combination with flammable fuel vapors, could result in fuel tank 
explosions and consequent loss of the airplane.

DATES: We must receive comments on this proposed AD by May 26, 2005.

ADDRESSES: Use one of the following addresses to submit comments on 
this proposed AD.
     DOT Docket Web site: Go to https://dms.dot.gov and follow 
the instructions for sending your comments electronically.
     Government-wide rulemaking Web site: Go to https://
www.regulations.gov and follow the instructions for sending your 
comments electronically.
     Mail: Docket Management Facility, U.S. Department of 
Transportation, 400 Seventh Street, SW., Nassif Building, room PL-401, 
Washington, DC 20590.
     By fax: (202) 493-2251.
     Hand Delivery: Room PL-401 on the plaza level of the 
Nassif Building, 400 Seventh Street, SW., Washington, DC, between 9 
a.m. and 5 p.m., Monday through Friday, except Federal holidays.
    For service information identified in this proposed AD, contact 
AvCraft Aerospace GmbH, P.O. Box 1103, D-82230 Wessling, Germany.
    You can examine the contents of this AD docket on the Internet at 
https://dms.dot.gov, or in person at the Docket Management Facility, 
U.S. Department of Transportation, 400 Seventh Street, SW., room PL-
401, on the plaza level of the Nassif Building, Washington DC. This 
docket number is FAA-2005-21053; the directorate identifier for this 
docket is 2005-NM-053-AD.

FOR FURTHER INFORMATION CONTACT: Dan Rodina, Aerospace Engineer, 
International Branch, ANM-116, FAA, Transport Airplane Directorate, 
1601 Lind Avenue, SW., Renton, Washington 98055-4056; telephone (425) 
227-2125; fax (425) 227-1149.

SUPPLEMENTARY INFORMATION:

Comments Invited

    We invite you to submit any relevant written data, views, or 
arguments regarding this proposed AD. Send your comments to an address 
listed under ADDRESSES. Include ``Docket No. FAA-2005-21053; 
Directorate Identifier 2005-NM-053-AD'' at the beginning of your 
comments. We specifically invite comments on the overall regulatory, 
economic, environmental, and energy aspects of the proposed AD. We will 
consider all comments submitted by the closing date and may amend the 
proposed AD in light of those comments.
    We will post all comments we receive, without change, to https://
dms.dot.gov, including any personal information you provide. We will 
also post a report summarizing each substantive verbal contact with FAA 
personnel concerning this proposed AD. Using the search function of our 
docket Web site, anyone can find and read the comments in any of our 
dockets, including the name of the individual who sent the comment (or 
signed the comment on behalf of an association, business, labor union, 
etc.). You can review the DOT's complete Privacy Act Statement in the 
Federal Register published on April 11, 2000 (65 FR 19477-78), or you 
can visit https://dms.dot.gov.

Examining the Docket

    You can examine the AD docket on the Internet at https://
dms.dot.gov, or in person at the Docket Management Facility office 
between 9 a.m. and 5 p.m., Monday through Friday, except Federal 
holidays. The Docket Management Facility office (telephone (800) 647-
5227) is located on the plaza level of the Nassif Building at the DOT 
street address stated in the ADDRESSES section. Comments will be 
available in the AD docket shortly after the DMS receives them.

Discussion

    The FAA has examined the underlying safety issues involved in 
recent fuel tank explosions on several large transport airplanes, 
including the adequacy of existing regulations, the service history of 
airplanes subject to those regulations, and existing maintenance 
practices for fuel tank systems. As a result of those findings, we 
issued a regulation titled ``Transport Airplane Fuel Tank System Design 
Review, Flammability Reduction and Maintenance and Inspection 
Requirements'' (67 FR 23086, May 7, 2001). In addition to new 
airworthiness standards for transport airplanes and new maintenance 
requirements, this rule included Special Federal Aviation Regulation 
No. 88 (``SFAR 88,'' Amendment 21-78, and subsequent Amendments 21-82 
and 21-83).

[[Page 21345]]

    Among other actions, SFAR 88 requires certain type design (i.e., 
type certificate (TC) and supplemental type certificate (STC)) holders 
to substantiate that their fuel tank systems can prevent ignition 
sources in the fuel tanks. This requirement applies to type design 
holders for large turbine-powered transport airplanes and for 
subsequent modifications to those airplanes. It requires them to 
perform design reviews and to develop design changes and maintenance 
procedures if their designs do not meet the new fuel tank safety 
standards. As explained in the preamble to the rule, we intended to 
adopt airworthiness directives to mandate any changes found necessary 
to address unsafe conditions identified as a result of these reviews.
    In evaluating these design reviews, we have established four 
criteria intended to define the unsafe conditions associated with fuel 
tank systems that require corrective actions. The percentage of 
operating time during which fuel tanks are exposed to flammable 
conditions is one of these criteria. The other three criteria address 
the failure types under evaluation: Single failures, single failures in 
combination with another latent condition(s), and in-service failure 
experience. For all four criteria, the evaluations included 
consideration of previous actions taken that may mitigate the need for 
further action.
    The Joint Aviation Authorities (JAA) has issued a regulation that 
is similar to SFAR 88. (The JAA is an associated body of the European 
Civil Aviation Conference (ECAC) representing the civil aviation 
regulatory authorities of a number of European States who have agreed 
to co-operate in developing and implementing common safety regulatory 
standards and procedures.) Under this regulation, the JAA stated that 
all members of the ECAC that hold type certificates for transport 
category airplanes are required to conduct a design review against 
explosion risks.
    We have determined that the actions identified in this AD are 
necessary to reduce the potential of ignition sources inside fuel 
tanks, which, in combination with flammable fuel vapors, could result 
in fuel tank explosions and consequent loss of the airplane.
    In light of these findings, the Luftfahrt-Bundesamt (LBA), which is 
the airworthiness authority for Germany, issued German airworthiness 
directive D-2005-001, dated January 26, 2005, to address the unsafe 
condition previously described on Dornier Model 328-100 series 
airplanes.

Relevant Service Information

    The airplane manufacturer has issued Dornier Service Bulletin SB-
328-00-445, dated August 23, 2004. The service bulletin describes 
procedures for:
     Modifying the electrical wiring of the left-hand and 
right-hand fuel pumps, which includes installing new supports, wet-
installing plugs, and torquing and securing nuts;
     Installing insulation at the left-hand and right-hand flow 
control and shut-off valves, and other components of the environmental 
control system (i.e., cross bleed valve; and temperature control valve 
and cold air unit of the environmental control unit; and bleed air 
inlet), which includes replacing the existing flex joint covers of the 
bleed air ducts with new covers;
     Installing markings at fuel wiring harnesses; and
     Amending the Airworthiness Limitations Document.
    Accomplishing the actions specified in the service information is 
intended to adequately address the unsafe condition. The LBA mandated 
the service information to ensure the continued airworthiness of these 
airplanes in Germany.

FAA's Determination and Requirements of the Proposed AD

    This airplane model is manufactured in Germany and is type 
certificated for operation in the United States under the provisions of 
section 21.29 of the Federal Aviation Regulations (14 CFR 21.29) and 
the applicable bilateral airworthiness agreement. Pursuant to this 
bilateral airworthiness agreement, the LBA has kept the FAA informed of 
the situation described above. We have examined the LBA's findings, 
evaluated all pertinent information, and determined that we need to 
issue an AD for products of this type design that are certificated for 
operation in the United States. Therefore, we are proposing this AD, 
which would require accomplishing the actions specified in the service 
information described previously. This proposed AD also would require 
revising the Airworthiness Limitations section of the Instructions for 
Continued Airworthiness to incorporate new inspections of the fuel tank 
system.

Costs of Compliance

    This proposed AD would affect about 6 airplanes of U.S. registry. 
The proposed actions would take about 70 work hours per airplane, at an 
average labor rate of $65 per work hour. Required parts would cost 
about $14,118 per airplane. Based on these figures, the estimated cost 
of the proposed AD for U.S. operators is $112,008, or $18,668 per 
airplane.

Authority for This Rulemaking

    Title 49 of the United States Code specifies the FAA's authority to 
issue rules on aviation safety. Subtitle I, Section 106, describes the 
authority of the FAA Administrator. Subtitle VII, Aviation Programs, 
describes in more detail the scope of the Agency's authority.
    We are issuing this rulemaking under the authority described in 
Subtitle VII, Part A, Subpart III, Section 44701, ``General 
requirements.'' Under that section, Congress charges the FAA with 
promoting safe flight of civil aircraft in air commerce by prescribing 
regulations for practices, methods, and procedures the Administrator 
finds necessary for safety in air commerce. This regulation is within 
the scope of that authority because it addresses an unsafe condition 
that is likely to exist or develop on products identified in this 
rulemaking action.

Regulatory Findings

    We have determined that this proposed AD would not have federalism 
implications under Executive Order 13132. This proposed AD would not 
have a substantial direct effect on the States, on the relationship 
between the national Government and the States, or on the distribution 
of power and responsibilities among the various levels of government.
    For the reasons discussed above, I certify that the proposed 
regulation:
    1. Is not a ``significant regulatory action'' under Executive Order 
12866;
    2. Is not a ``significant rule'' under the DOT Regulatory Policies 
and Procedures (44 FR 11034, February 26, 1979); and
    3. Will not have a significant economic impact, positive or 
negative, on a substantial number of small entities under the criteria 
of the Regulatory Flexibility Act.
    We prepared a regulatory evaluation of the estimated costs to 
comply with this proposed AD. See the ADDRESSES section for a location 
to examine the regulatory evaluation.

List of Subjects in 14 CFR Part 39

    Air transportation, Aircraft, Aviation safety, Safety.

The Proposed Amendment

    Accordingly, under the authority delegated to me by the 
Administrator, the FAA proposes to amend 14 CFR part 39 as follows:

[[Page 21346]]

PART 39--AIRWORTHINESS DIRECTIVES

    1. The authority citation for part 39 continues to read as follows:

    Authority: 49 U.S.C. 106(g), 40113, 44701.


Sec.  39.13  [Amended]

    2. The FAA amends Sec.  39.13 by adding the following new 
airworthiness directive (AD):

Fairchild Dornier GmbH (Formerly Dornier Luftfahrt GmbH): Docket No. 
FAA-2005-21053; Directorate Identifier 2005-NM-053-AD.

Comments Due Date

    (a) The Federal Aviation Administration must receive comments on 
this AD action by May 26, 2005.

Affected ADs

    (b) None.

Applicability

    (c) This AD applies to all Dornier Model 328-100 series 
airplanes, certificated in any category.

Unsafe Condition

    (d) This AD was prompted by the results of fuel system reviews 
conducted by the airplane manufacturer. We are issuing this AD to 
reduce the potential of ignition sources inside fuel tanks, which, 
in combination with flammable fuel vapors, could result in fuel tank 
explosions and consequent loss of the airplane.

Compliance

    (e) You are responsible for having the actions required by this 
AD performed within the compliance times specified, unless the 
actions have already been done.

Modification and Installations

    (f) Within 12 months after the effective date of this AD, do the 
actions in Table 1 of this AD in accordance with the Accomplishment 
Instructions of Dornier Service Bulletin SB-328-00-445, dated August 
23, 2004.

                         Table 1.--Requirements
------------------------------------------------------------------------
                                              By accomplishing all the
        Do the following actions--             actions specified in--
------------------------------------------------------------------------
(1) Modify the electrical wiring of the     Paragraph 2.B(1) of the
 left-hand and right-hand fuel pumps.        service bulletin.
(2) Install insulation at the left-hand     Paragraph 2.B(2) of the
 and right-hand flow control and shut-off    service bulletin.
 valves, and other components of the
 environmental control system.
(3) Install markings at fuel wiring         Paragraph 2.B(3) of the
 harnesses.                                  service bulletin.
------------------------------------------------------------------------

Revision to Airworthiness Limitations

    (g) Within 12 months after the effective date of this AD, revise 
the Airworthiness Limitations section of the Instructions for 
Continued Airworthiness by inserting a copy of Dornier Temporary 
Revision TR ALD-080, dated October 15, 2003, into the Dornier 328 
Airworthiness Limitations Document. Thereafter, except as provided 
in paragraph (h) of this AD, no alternative inspection intervals may 
be approved for this fuel tank system.

Alternative Methods of Compliance (AMOCs)

    (h) The Manager, International Branch, ANM-116, Transport 
Airplane Directorate, FAA, has the authority to approve AMOCs for 
this AD, if requested in accordance with the procedures found in 14 
CFR 39.19.

Related Information

    (i) German airworthiness directive D-2005-001, dated January 26, 
2005, also addresses the subject of this AD.

    Issued in Renton, Washington, on April 18, 2005.
Ali Bahrami,
Manager, Transport Airplane Directorate, Aircraft Certification 
Service.
[FR Doc. 05-8271 Filed 4-25-05; 8:45 am]
BILLING CODE 4910-13-P
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.