Small Business Government Contracting Programs; Subcontracting; Correction, 1655 [05-414]

Download as PDF 1655 Rules and Regulations Federal Register Vol. 70, No. 6 Monday, January 10, 2005 This section of the FEDERAL REGISTER contains regulatory documents having general applicability and legal effect, most of which are keyed to and codified in the Code of Federal Regulations, which is published under 50 titles pursuant to 44 U.S.C. 1510. The Code of Federal Regulations is sold by the Superintendent of Documents. Prices of new books are listed in the first FEDERAL REGISTER issue of each week. SMALL BUSINESS ADMINISTRATION 13 CFR Part 125 RIN 3245–AF12 Small Business Government Contracting Programs; Subcontracting; Correction Small Business Administration. Final rule; correction. AGENCY: ACTION: SUMMARY: The U.S. Small Business Administration (SBA) is correcting a final rule that appeared in the Federal Register of December 20, 2004 (69 FR 75820). Among other things, the document issued a list of factors to consider in evaluating a prime contractor’s performance and good faith efforts to achieve the requirements in its subcontracting plan and authorized the use of goals in subcontracting plans, and/or past performance in meeting such goals, as a factor in source selection when placing orders against Federal Supply Schedules, governmentwide acquisition contracts, and multiagency contracts. This document incorrectly stated that the final rule was effective on December 20, 2004. The document did not put the public on notice that the final rule had been designated as a major rule under the Congressional Review Act. DATES: Effective January 10, 2005, the effective date of the final rule published on December 20, 2004 (69 FR 75820) is corrected to February 18, 2005. FOR FURTHER INFORMATION CONTACT: Dean Koppel, Assistant Administrator, Office of Policy and Research, (202) 401–8150 or dean.koppel@sba.gov. SUPPLEMENTARY INFORMATION: In 69 FR appearing on page 75820 in the Federal Register of Monday, December 20, 2004, the following corrections are made: 1. On page 75820, in the second column, the DATES section, ‘‘DATES: This rule is effective on December 20, 2004’’ VerDate jul<14>2003 13:27 Jan 07, 2005 Jkt 205001 is corrected to read ‘‘DATES: This rule is effective on February 18, 2005.’’ 2. On page 75824, in the first column, the second paragraph in the ‘‘Compliance with Executive Orders 13132, 12988 and 12866, the Regulatory Flexibility Act (5 U.S.C. 601–612), and the Paperwork Reduction Act (44 U.S.C. Ch. 35)’’ section, ‘‘The Office of Management and Budget (OMB) has determined that this rule constitutes a significant regulatory action under Executive Order 12866. The rule revises the SBA regulation governing small business contracting assistance to define good faith effort’’ is corrected to read ‘‘The Office of Management and Budget (OMB) has determined that this rule constitutes an economically significant regulatory action under Executive Order 12866. OMB’s determination is based on the expectation that this rule will expand the number of subcontracting awards currently received by small businesses pursuant to Federal prime contracts, which were worth $34.4 billion in FY 2002. In addition, this rule has been designated as a major rule under the Congressional Review Act because even a marginal increase in the number of subcontract awards received by small businesses pursuant to Federal prime contracts as a result of this rule will exceed the $100 million threshold for major rules.’’ Dated: January 4, 2005. Allegra F. McCullough, Associate Deputy Administrator for Government Contracting and Business Development. [FR Doc. 05–414 Filed 1–7–05; 8:45 am] BILLING CODE 8025–01–P DEPARTMENT OF TRANSPORTATION Federal Aviation Administration 14 CFR Part 39 [Docket No. 2003–NM–166–AD; Amendment 39–13936; AD 2005–01–12] RIN 2120–AA64 Airworthiness Directives; Boeing Model 757–200, –200PF, and –200CB Series Airplanes Federal Aviation Administration, DOT. ACTION: Final rule. AGENCY: PO 00000 Frm 00001 Fmt 4700 Sfmt 4700 SUMMARY: This amendment adopts a new airworthiness directive (AD), applicable to certain Boeing Model 757– 200, –200PF, and –200CB series airplanes, that requires an inspection of certain ballscrews of the trailing edge flap system to find their part numbers, and replacement of the ballscrews with new, serviceable, or modified ballscrews if necessary. This action is necessary to prevent a flap skew due to insufficient secondary load path of the ballscrew of the trailing edge flaps in the event that the primary load path fails, which could result in possible loss of a flap and reduced controllability of the airplane. This action is intended to address the identified unsafe condition. DATES: Effective February 14, 2005. The incorporation by reference of a certain publication listed in the regulations is approved by the Director of the Federal Register as of February 14, 2005. ADDRESSES: The service information referenced in this AD may be obtained from Boeing Commercial Airplanes, P.O. Box 3707, Seattle, Washington 98124–2207. This information may be examined at the Federal Aviation Administration (FAA), Transport Airplane Directorate, Rules Docket, 1601 Lind Avenue, SW., Renton, Washington; or at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, call (202) 741– 6030, or go to: https://www.archives.gov/ federal_register/ code_of_federal_regulations/ ibr_locations.html. FOR FURTHER INFORMATION CONTACT: Douglas Tsuji, Aerospace Engineer, Systems and Equipment Branch, ANM– 130S, FAA, Seattle Aircraft Certification Office, 1601 Lind Avenue, SW., Renton, Washington 98055–4056; telephone (425) 917–6487; fax (425) 917–6590. SUPPLEMENTARY INFORMATION: A proposal to amend part 39 of the Federal Aviation Regulations (14 CFR part 39) to include an airworthiness directive (AD) that is applicable to certain Boeing Model 757–200, –200PF, and –200CB series airplanes was published in the Federal Register on April 1, 2004 (69 FR 17105). That action proposed to require an inspection of certain ballscrews of the trailing edge flap system to find their part numbers, and replacement of the ballscrews with new, serviceable, or modified ballscrews if necessary. E:\FR\FM\10JAR1.SGM 10JAR1

Agencies

[Federal Register Volume 70, Number 6 (Monday, January 10, 2005)]
[Rules and Regulations]
[Page 1655]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 05-414]



========================================================================
Rules and Regulations
                                                Federal Register
________________________________________________________________________

This section of the FEDERAL REGISTER contains regulatory documents 
having general applicability and legal effect, most of which are keyed 
to and codified in the Code of Federal Regulations, which is published 
under 50 titles pursuant to 44 U.S.C. 1510.

The Code of Federal Regulations is sold by the Superintendent of Documents. 
Prices of new books are listed in the first FEDERAL REGISTER issue of each 
week.

========================================================================


Federal Register / Vol. 70, No. 6 / Monday, January 10, 2005 / Rules 
and Regulations

[[Page 1655]]



SMALL BUSINESS ADMINISTRATION

13 CFR Part 125

RIN 3245-AF12


Small Business Government Contracting Programs; Subcontracting; 
Correction

AGENCY: Small Business Administration.

ACTION: Final rule; correction.

-----------------------------------------------------------------------

SUMMARY: The U.S. Small Business Administration (SBA) is correcting a 
final rule that appeared in the Federal Register of December 20, 2004 
(69 FR 75820). Among other things, the document issued a list of 
factors to consider in evaluating a prime contractor's performance and 
good faith efforts to achieve the requirements in its subcontracting 
plan and authorized the use of goals in subcontracting plans, and/or 
past performance in meeting such goals, as a factor in source selection 
when placing orders against Federal Supply Schedules, government-wide 
acquisition contracts, and multi-agency contracts. This document 
incorrectly stated that the final rule was effective on December 20, 
2004. The document did not put the public on notice that the final rule 
had been designated as a major rule under the Congressional Review Act.

DATES: Effective January 10, 2005, the effective date of the final rule 
published on December 20, 2004 (69 FR 75820) is corrected to February 
18, 2005.

FOR FURTHER INFORMATION CONTACT: Dean Koppel, Assistant Administrator, 
Office of Policy and Research, (202) 401-8150 or dean.koppel@sba.gov.

SUPPLEMENTARY INFORMATION: In 69 FR appearing on page 75820 in the 
Federal Register of Monday, December 20, 2004, the following 
corrections are made:
    1. On page 75820, in the second column, the DATES section, ``DATES: 
This rule is effective on December 20, 2004'' is corrected to read 
``DATES: This rule is effective on February 18, 2005.''
    2. On page 75824, in the first column, the second paragraph in the 
``Compliance with Executive Orders 13132, 12988 and 12866, the 
Regulatory Flexibility Act (5 U.S.C. 601-612), and the Paperwork 
Reduction Act (44 U.S.C. Ch. 35)'' section, ``The Office of Management 
and Budget (OMB) has determined that this rule constitutes a 
significant regulatory action under Executive Order 12866. The rule 
revises the SBA regulation governing small business contracting 
assistance to define good faith effort'' is corrected to read ``The 
Office of Management and Budget (OMB) has determined that this rule 
constitutes an economically significant regulatory action under 
Executive Order 12866. OMB's determination is based on the expectation 
that this rule will expand the number of subcontracting awards 
currently received by small businesses pursuant to Federal prime 
contracts, which were worth $34.4 billion in FY 2002. In addition, this 
rule has been designated as a major rule under the Congressional Review 
Act because even a marginal increase in the number of subcontract 
awards received by small businesses pursuant to Federal prime contracts 
as a result of this rule will exceed the $100 million threshold for 
major rules.''

    Dated: January 4, 2005.
Allegra F. McCullough,
Associate Deputy Administrator for Government Contracting and Business 
Development.
[FR Doc. 05-414 Filed 1-7-05; 8:45 am]
BILLING CODE 8025-01-P
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.