[Federal Register: December 8, 2006 (Volume 71, Number 236)] [Rules and Regulations] [Page 71429-71455] From the Federal Register Online via GPO Access [wais.access.gpo.gov] [DOCID:fr08de06-19] [[Page 71429]] ----------------------------------------------------------------------- Part V Department of Labor ----------------------------------------------------------------------- Mine Safety and Health Administration ----------------------------------------------------------------------- 30 CFR Parts 3, 48, 50 and 75 Emergency Mine Evacuation; Final Rule [[Page 71430]] ----------------------------------------------------------------------- DEPARTMENT OF LABOR Mine Safety and Health Administration 30 CFR Parts 3, 48, 50, 75 RIN 1219-AB46 Emergency Mine Evacuation AGENCY: Mine Safety and Health Administration, Labor. ACTION: Final rule. ----------------------------------------------------------------------- SUMMARY: The Mine Safety and Health Administration (MSHA) is issuing this final rule to revise the Agency's Emergency Temporary Standard (ETS), which addresses standards in the Code of Federal Regulations (CFR), title 30, parts 48, 50, and 75. The final rule includes requirements for increased availability and storage of self-contained self-rescue devices (SCSRs); improved emergency evacuation drills and self-contained self-rescue device training; and the installation and maintenance of lifelines in underground coal mines. In addition, the final rule requires immediate accident notification applicable to all mines. The requirements provide an improved, integrated approach to emergency evacuation training and emergency preparedness. This final rule does not reduce protections afforded miners under existing standards. DATES: Effective Date: This rule is effective December 8, 2006. Compliance Dates: Sec. Sec. 48.3 and 75.1502--The operator shall submit a revised training plan and a revised program of instruction to the appropriate District Manager for approval no later than February 6, 2007, and conduct training within 30 days of plan approval. Sec. 75.1504--The operator shall complete the initial quarterly emergency mine evacuation training and drill no later than March 31, 2007. Sec. 75.1504(c)(3)--The operator shall place purchase orders for realistic SCSR training units or devices within 30 days of notification by MSHA that the units are available, and conduct this component of expectations training within 60 days of receipt of the units. MSHA will notify mine operators of the availability of realistic SCSR training units by publishing a notice in the Federal Register. Sec. Sec. 75.1714-6 and 75.1714-7--The operator shall provide emergency tethers and handheld, multi-gas detectors no later than February 6, 2007. Sec. 75.1714-8--The operator shall complete the self-contained self-rescue (SCSR) device inventory no later than March 31, 2007. FOR FURTHER INFORMATION CONTACT: Patricia W. Silvey, Director, Office of Standards, Regulations, and Variances, MSHA, 1100 Wilson Boulevard, Room 2350, Arlington, Virginia 22209-3939. Ms. Silvey can be reached at silvey.patricia@dol.gov (internet e-mail), 202-693-9440 (voice), or 202-693-9441 (facsimile). SUPPLEMENTARY INFORMATION: I. Introduction The outline of this final rule is as follows: I. Introduction A. Background of the Final Rule B. General Discussion of the Final Rule II. Section-By-Section Analysis A. Part 48--Training and Retraining of Miners B. Part 50--Notification, Investigation, Reports and Records of Accidents, Injuries, Illnesses, Employment, and Coal Production in Mines C. Part 75--Mandatory Safety Standards--Underground Coal Mines III. Derivation and Distribution Tables IV. Executive Order 12866 A. Population-at-Risk B. Compliance Costs C. Benefits V. Feasibility VI. Regulatory Flexibility Act and Small Business Regulatory Enforcement Fairness Act (SBREFA) A. Definition of a Small Mine B. Factual Basis for Certification VII. Paperwork Reduction Act of 1995 A. Summary B. Procedural Details VIII. Other Regulatory Considerations A. The Unfunded Mandates Reform Act of 1995 B. The Treasury and General Government Appropriations Act of 1999: Assessment of Federal Regulations and Policies on Families C. Executive Order 12630: Government Actions and Interference With Constitutionally Protected Property Rights D. Executive Order 12988: Civil Justice Reform E. Executive Order 13045: Protection of Children from Environmental Health Risks and Safety Risks F. Executive Order 13132: Federalism G. Executive Order 13175: Consultation and Coordination with Indian Tribal Governments H. Executive Order 13211: Actions Concerning Regulations That Significantly Affect Energy Supply, Distribution, or Use I. Executive Order 13272: Proper Consideration of Small Entities in Agency Rulemaking IX. Final Rule Text A. Background of the Final Rule In developing the final rule, MSHA considered accident and injury data, research studies and data, implementation and enforcement experience, and the written comments and hearing testimony on the Emergency Temporary Standard (ETS), as well as provisions of the Mine Improvement and New Emergency Response Act of 2006 (Pub. L. 109-236) (MINER Act). 1. Emergency Temporary Standard MSHA issued an ETS on March 9, 2006 (71 FR 12252) in accordance with Section 101(b) of the Federal Mine Safety and Health Act of 1977 (Mine Act). Mine emergencies in underground coal mines, particularly the accidents at the Sago and Aracoma Alma mines in January 2006, led MSHA to conclude that a more integrated approach to mine emergency response and evacuation was necessary. In issuing the ETS, MSHA acted to protect miners from a grave danger associated with mine emergencies and evacuations. In accordance with the Mine Act, the ETS served as the proposed rule, and was effective immediately upon publication. This final rule addresses standards and issues in the ETS. The ETS included requirements for underground coal mine operators to: provide additional self-contained self-rescue devices (SCSRs) for persons working underground; conduct improved SCSR training and more realistic evacuation drills; and install and maintain lifelines in both escapeways. The ETS also required all mine operators to immediately notify MSHA of accidents within 15 minutes. MSHA solicited public comments on the ETS and held four public hearings. These hearings took place on: April 24, 2006, in Lakewood, Colorado; April 26, 2006, in Lexington, Kentucky; April 28, 2006, in Arlington, Virginia; and May 9, 2006, in Charleston, West Virginia (71 FR 15028). The public comment period, scheduled to close on May 30, 2006, was extended to June 29, 2006 (71 FR 29785), in response to a request from the public and to allow the public additional time to respond to the 17 questions and other issues raised in the ETS and in MSHA's opening statement at the public hearings. Comments and public hearing transcripts are available on MSHA's website at http://www.msha.gov. MSHA considered all relevant comments when developing this final rule. 2. The Mine Improvement and New Emergency Response Act of 2006 Responding to the Sago and Aracoma Alma mine tragedies, Congress enacted the MINER Act, which was signed by the President on June 15, 2006. The MINER Act amended the Mine Act and, among other things, included provisions [[Page 71431]] that addressed some of the same requirements as the ETS. The MINER Act included requirements for SCSR storage, training, lifelines, and accident notification. MSHA issued Program Policy Letter (PPL) No. P06-V-8 on July 21, 2006, PPL No. P06-V-9 on August 4, 2006, and PPL No. P06-V-10 on October 24, 2006, providing guidance to the mining industry for implementing Emergency Response Plans in accordance with Section 2 of the MINER Act. In the final rule, MSHA reconciles the ETS with applicable provisions of the MINER Act. 3. Timeline for Implementation of the Final Rule MSHA provides mine operators additional time to comply with various provisions of this final rule. The mine operator may have to revise training, emergency evacuation, or firefighting plans; train miners in new and revised provisions; determine the locations for SCSR storage; purchase and install equipment, as applicable; or compile SCSR inventories. Because of ETS and MINER Act requirements, operators will already be in compliance with many of the provisions in this final. Underground coal mine operators must submit a revised training plan for part 48 and a revised program of instruction for Sec. 75.1502 to the relevant MSHA District Manager for approval no later than February 6, 2007. The operator must train in accordance with the revised program under 30 CFR 75.1502 within 30 days of plan approval. Any new or revised training plan and program must incorporate new and revised requirements, even if the equipment necessary to conduct the training is not yet available. The final rule allows operators until February 6, 2007, to obtain tethers and hand-held, multi-gas detectors. The final rule also allows operators until March 31, 2007 (the first quarter of 2007) to complete the mine emergency evacuation training and drill required by Sec. 75.1504 and the SCSR inventory required by Sec. 75.1714-8. The final rule does not include a specific compliance date for one component of ``expectations'' training required by Sec. 75.1504(c) because realistic SCSR training units, or devices that provide the sensation of SCSR airflow resistance and heat, are not yet available for purchase. The final rule requires the mine operator to have a purchase order for these realistic SCSR training units within 30 days of notification by MSHA that the units are available. The mine operator must complete training on breathing through a realistic SCSR training unit or equivalent device within 60 days of receipt of the training units. MSHA will accept, as good faith evidence of compliance with the final rule, purchase orders for: SCSR training units and mouthpieces (Sec. 75.1504); additional SCSRs (Sec. 75.1714-4); tethers (Sec. 75.1714-6); and handheld multi-gas detectors (Sec. 75.1714-7). The Agency will also accept contracts with a training facility to provide SCSR ``expectations'' training [Sec. 75.1504(c)] as good faith evidence of compliance with the final rule. B. General Discussion of the Final Rule The final rule helps assure that miners, mine operators, and MSHA will be able to respond quickly and effectively in the event of an emergency. It includes requirements for mine operators to provide increased capability for mine emergency response and evacuation and covers SCSR availability and storage; training and drills; lifelines, tethers, and multi-gas detectors; and accident notification. 1. Self-Contained Self-Rescue Devices (SCSRs) Explosions and mine fires are an ever-present threat in an underground coal mine and can present a grave potential hazard to underground coal miners due to toxic atmospheres and limited visibility. Contaminated air can contain volatile hydrocarbons, chlorine, hydrogen cyanide, isocyanates, oxides of nitrogen, and oxides of sulfur. These contaminants are more complex and potentially more harmful than carbon monoxide and carbon dioxide, the ordinary combustion products of coal fires. SCSRs are closed-circuit breathing devices containing or producing an independent supply of oxygen, enabling miners to breathe in the presence of hazardous or life-threatening contaminants in the mine atmosphere. SCSRs allow miners to escape from mine fires, explosions, and other incidents where an irrespirable mine atmosphere is present. Since 1980, MSHA has required that each person working in an underground coal mine have immediate access to an SCSR. The final rule adds requirements to assure that SCSRs are maintained in good condition and are accessible to all underground miners. The final rule also includes requirements to assure that miners know when and how to use SCSRs effectively. 2. Effective Mine Emergency Training and Response The best technology, equipment, and emergency supplies are of little use if they are not used effectively or at all. Emergencies can cause disorientation and panic. The appropriate response in a mine emergency can be vital to survival. Training is critical to instilling discipline, confidence, and skill necessary to successfully escape and survive an emergency. The final rule requires more comprehensive training and realistic mine emergency evacuation training and drills to help assure that underground coal miners can respond quickly and appropriately to life threatening mine emergencies. 3. Continuous Directional Lifelines and Tethers MSHA intends that miners, not required to respond to a mine emergency, evacuate the mine as quickly as possible. In this final rule, MSHA reiterates that, in the event of a mine emergency, the first line of defense is to evacuate the mine. To assist miners in evacuating the mine under conditions of panic and poor visibility, the final rule requires mine operators to provide both continuous directional lifelines and tethers. Continuous, directional lifelines are required to be installed and maintained in both the primary and alternate escapeways to guide miners to a mine exit. Tethers are required to be stored at inby storage locations and on mantrips so that members of a mine crew can link together while evacuating the mine. 4. Notifying MSHA of Accidents In emergencies, where delay in responding can mean the difference between life and death, immediate notification leads to the mobilization of an effective mine emergency response. Immediate notification activates MSHA emergency response efforts, which can be critical in saving lives, stabilizing the situation, and preserving the accident scene. Immediate notification also promotes Agency assistance of the mine's first responder efforts. In other situations, it allows for a range of appropriate Agency responses depending on the circumstances. It alerts MSHA to trends or warning signals that can trigger a special inspection, an investigation, or targeted enforcement. This communication also encourages operators and miners to work with MSHA to develop procedures that prevent incidents from resulting in more hazardous situations, ultimately leading to disasters. II. Section-By-Section Analysis This final rule adds new requirements in 30 CFR parts 48, 50, and 75. In addition, this final rule makes non-substantive conforming amendments to [[Page 71432]] 30 CFR part 3 to reflect changed numbering of standards and to display additional OMB control numbers under the Paperwork Reduction Act of 1995. A. Part 48--Training and Retraining of Miners The final rule makes several changes to the training standards in 30 CFR part 48. It modifies SCSR donning procedures by removing the option allowing underground coal miners to simulate the insertion of the mouthpiece while explaining this task. Commenters were concerned that ETS training requirements applied only to underground coal mines. They stated that underground metal and nonmetal mines face the same evacuation needs as coal mines when a fire, explosion, or gas or water inundation occurs underground. Commenters expressed concern that MSHA was making a substantive change to the training courses in Sec. Sec. 48.5(b)(5) and 48.6(b)(5) by referencing 30 CFR 57.11053 (escape and evacuation plans applicable to metal and nonmetal mines). Another commenter expressed concern that the ETS was ambiguous with respect to some provisions in 30 CFR part 48. This commenter asked MSHA to clarify that the changes to part 48 apply only to underground coal mines. The training provisions in the ETS applied only to underground coal mines, and not to metal and nonmetal mines. Similarly, the training provisions in this final rule apply only to underground coal mines, and not to metal and nonmetal mines. Although the final rule retains the reference to 30 CFR 57.11053, it makes no change to the training requirement for metal and nonmetal evacuation procedures. Changes to metal and nonmetal emergency evacuation procedures in 30 CFR part 57 are beyond the scope of this final rule. Some commenters were concerned that, by adding new or expanded requirements, new miner and annual refresher training would become more overloaded. These commenters recommended that MSHA remove mine emergency training requirements from part 48 and consolidate them in part 75. These commenters stated that consolidating mine emergency evacuation training requirements in part 75 would emphasize the importance of this training. In response to commenters' concerns, the final rule transfers to part 75, part 48 annual refresher training requirements on self-rescue devices and on mine maps, escapeways, emergency evacuation, and firefighting, and integrates them with mine emergency evacuation training and drill requirements. By providing underground coal miners with an integrated, more realistic training experience quarterly, this final rule will increase training effectiveness. Because this training now will be conducted under part 75, the time that was previously allotted for it, in the 8 hours of annual refresher training required under part 48, can be used for other health and safety subjects. Under the final rule, independent contractors who do not receive this training under part 75 will continue to receive it under part 48. For these workers, this training will continue to count toward part 48 training requirements. 1. Section 48.3 Training Plans This final rule modifies Sec. 48.3(p) to require each operator of an underground coal mine, who is required to submit a revised program of instruction for 30 CFR 75.1502, to also submit a revised training plan under part 48. Consistent with MSHA's past practice, to minimize administrative burdens, the Agency will provide coal mine operators with a training plan addendum to address the change made in SCSR donning procedures requiring insertion of the mouthpiece. Underground coal mine operators can attach the addendum to their approved training plan in lieu of resubmitting the entire part 48 training plan for approval. 2. Sections 48.5(b)(2), 48.6(b)(12), 48.8(b)(8), and 48.11(a)(4) Self- Rescue and Respiratory Devices The final rule retains the ETS requirements for self-rescue and respiratory device training, including instruction and demonstration in the use, care, and maintenance of self-rescue and respiratory devices used at the mine. The ETS standards required hands-on training in SCSR donning procedures, including a requirement that the miner insert the mouthpiece or simulate this task while explaining proper insertion, and a requirement for hands-on training in transferring from a ``self- rescue device to an SCSR.'' The final rule revises the existing standard and removes the option allowing miners to simulate inserting the mouthpiece while explaining proper insertion. The final rule also clarifies MSHA's intent that transferring from a ``self-rescue device to an SCSR'' applies to all applicable self-rescue devices at the mine. Under the final rule, after receiving new or experienced miner training, underground coal miners will receive SCSR donning and transferring training under part 75, as part of the emergency mine evacuation training and drills, rather than under part 48 annual refresher training. Independent contractors who do not participate in mine emergency evacuation drills conducted under part 75 must continue to receive SCSR donning and transferring training under Sec. 48.8, annual refresher training, and Sec. 48.11, hazard training. The existing standards emphasize that proficiency in donning the SCSR is essential for a miner to successfully escape the mine during a mine emergency. The MINER Act further underscores this by requiring SCSR ``training for each miner in proper procedures for donning self- rescuers, switching from one unit to another, and ensuring a proper fit.'' MSHA experience and data show that a simulation of inserting the SCSR mouthpiece does not adequately provide the miner with the necessary skills to obtain a proper fit of the mouthpiece. Benefits supporting actual insertion of the mouthpiece include the miner's experience of a proper fit of the mouthpiece and the sensation of resistance breathing. This aspect of SCSR training is more effective when taught and learned in a safe environment, rather than in an emergency evacuation situation. Some commenters pointed out that insertion of the mouthpiece is a motor skill that requires practice to develop proficiency, and that simulation does not really provide this type of training. Several commenters supported training that included actual insertion of the mouthpiece using a training mouthpiece. One suggested that an economical disposable mouthpiece be developed for use in ``expectations'' training. Referencing his company's participation in Bureau of Mines' research studies in the early 1980's, one commenter stated that miners at his mine were each provided with their own mouthpiece and corrugated hose, which would simulate breathing resistance and function as a personal training unit. One SCSR manufacturer makes a mouthpiece that not only simulates the breathing resistance of their SCSR, but is easily removable from the SCSR training unit. As pointed out by one commenter, these portable mouthpieces could be purchased for each employee, which would alleviate any hygienic concerns. The mining public has expressed concern over sharing a training mouthpiece even after it is cleaned and disinfected. Some miners have resisted using these devices, stating that the sanitizing methods may not be effective. [[Page 71433]] In ``Cleaning, Disinfecting, and Sterilizing Self-Contained Self- Rescuer Mouthpiece Assemblies Used in Hands-On Training,'' \1\ the Bureau of Mines describes some procedures for disinfecting mouthpieces. MSHA understands that insertion of the mouthpiece may cause some anxiety in miners; however, with proper cleaning and disinfecting, or personal mouthpieces, miners' anxiety should be minimized. Cleaning and disinfecting shared mouthpieces and providing disposable or personal mouthpieces are acceptable for training. --------------------------------------------------------------------------- \1\ NIOSH, Information Circular IC 9236, 1989. --------------------------------------------------------------------------- One commenter pointed out that-- Information on the correct procedures [for transferring SCSR units] is not provided by the manufacturer, especially from one manufacturer's unit to another. Also, no instructions are available to transfer from a chemical generating oxygen unit to a compressed oxygen type unit or vice-versa. MSHA has developed training materials to assist mine operators and certified instructors in providing training on transferring between all applicable SCSRs. MSHA will make training materials available to mine operators and post them on the Agency's Web site. 3. Section 48.8(b)(4) Roof or Ground Control, Ventilation, Emergency Evacuation and Firefighting Plans The final rule makes a conforming amendment to Sec. 48.8(b)(4) to clarify that underground coal miners who receive quarterly training on emergency evacuation and firefighting plans in effect at the mine, as part of the emergency mine evacuation training and drills under Sec. 75.1504, are not required to receive this training as part of their annual refresher training. 4. Sections 48.5(e) and 48.6(f) Participation in Evacuation Drills This final rule removes Sec. Sec. 48.5(e) and 48.6(f). These paragraphs in the ETS had been added to require new or newly employed experienced coal miners to participate in the next escapeway or evacuation drill. The final rule consolidates and expands the escapeway and evacuation drill requirements for underground coal mines under Sec. 75.1504 and transfers the requirement for newly hired miners to participate in the next evacuation drill to Sec. 75.1504(a)(1). The initial drill requirements in Sec. Sec. 48.5(e) and 48.6(f) are no longer needed. 5. Section 48.11(a)(4) Hazard Training This final rule retains the existing requirement for hands-on training in donning an SCSR and transferring from one self-rescue device to an SCSR. The final rule revises the ETS requirement to clarify MSHA's intent that hands-on training in transferring is between all applicable self-rescue devices at the mine. This final rule also revises the SCSR donning protocol to require insertion of the mouthpiece. Section II.A.2. of this preamble discusses this change. Some commenters stated that the requirements for hands-on training in donning and transferring all types of SCSRs used at the mine is unnecessary for non-mining personnel. They suggest that non-mining personnel, such as visitors and vendors, can receive adequate training via demonstration or video review of the use of an SCSR. Some suggested limited training on a designated unit. Others stated that-- * * * with regard to hazard training, we recommend clearly providing the operators the flexibility to accept form 5023 [sic] documentation of applicable, up-to-date SCSR training in lieu of hands-on training for non-mine employees * * *. Commenters stated that training non-mining personnel on donning multiple types of SCSRs would be counterproductive and that training on transferring between all self-rescue devices at the mine would be overwhelming and provide little benefit, especially for visitors. Commenters pointed out that these persons are accompanied at all times by an experienced miner who could assist them in the unlikely event of a mine emergency requiring the use of an SCSR. MSHA's experience and data suggest that all persons underground must be provided practical, hands-on experience in donning and transferring an SCSR. The final rule requires hands-on SCSR donning and transferring training for visitors, short-term workers, or independent contractors not regularly exposed to mine hazards under Sec. 48.11, hazard training, rather than under Sec. 75.1504. If the mine uses only one type of SCSR, these persons must be trained to don and transfer only that one type. If visitors, short-term workers, or independent contractors are going into the mine past an SCSR storage location that contains a different type SCSR than the one carried, these persons must be trained to don and transfer between both types of SCSRs before going underground. Training in transferring from one SCSR to another SCSR will provide them with skill needed to transfer to and don another SCSR. Even though accompanied by an experienced miner, at a minimum, visitors must be prepared to independently, quickly, and correctly don and transfer an SCSR. MSHA agrees that SCSR training for visitors, short-term workers, or independent contractors unfamiliar with mining could be confusing and that they may not always retain all the steps required to don and transfer. If these persons are involved in a mine emergency, direct assistance or instruction may be impossible. The better prepared these persons, however, the better their chance for donning the SCSR correctly during the first few critical minutes of a mine emergency. B. Part 50--Notification, Investigation, Reports and Records of Accidents, Injuries, Illnesses, Employment, and Coal Production in Mines Notifying MSHA of accidents must be a priority of the mine operator. Any unnecessary delay can result in loss of life or other harmful consequences. The final rule retains the requirement in the ETS that mine operators notify MSHA of all accidents immediately and within 15 minutes. The final rule also revises the definition for two types of reportable accidents, ``fire'' and ``entrapment.'' On January 2, 2006, the operator of the Sago Mine delayed notifying MSHA of the explosion for more than 2 hours. MSHA issued the ETS with the 15-minute immediate notification requirement, effective March 9, 2006. Subsequently, when the explosion at the Darby Mine occurred on May 20, 2006, the operator alerted MSHA within 5 minutes of being aware of the explosion. This allowed MSHA to immediately initiate a rescue response. 1. Section 50.2(h) Definition of Accident The final rule amends the definition for two types of reportable accidents. a. Section 50.2(h)(3): Accident Definition for Entrapment. Under the ETS and the previous standard, ``accident'' included ``[a]n entrapment of an individual for more than thirty minutes.'' Section 5(a) of the MINER Act amends Section 103(j) of the Mine Act pertaining to the reporting of accidents to include an ``entrapment of an individual at the mine which has a reasonable potential to cause death.'' Thus, to conform with the MINER Act, the final rule amends the definition of ``accident'' under Sec. 50.2(h)(3) to include such entrapments. In using the ``reasonable potential to cause death'' basis for injuries and entrapments, the MINER Act and the final rule retain an element of judgment. This ``reasonable potential'' language also appeared under the ETS and the prior standard in relation to injuries. According to the Federal Mine Safety and Health Review Commission (Commission), the operator's decision as [[Page 71434]] to what constitutes a ``reasonable potential to cause death'' ``cannot be made upon the basis of clinical or hypertechnical opinions as to a miner's chance of survival.'' The judgment is based on what a reasonable person would discern under the circumstances, particularly when ``[t]he decision to call MSHA must be made in a matter of minutes after a serious accident.'' [See Cougar Coal, 25 FMSHRC 513 at 521 (September 5, 2003)]. Based on MSHA experience and common medical knowledge, some types of ``injuries which have a reasonable potential to cause death'' include concussions, cases requiring cardio-pulmonary resuscitation (CPR), limb amputations, major upper body blunt force trauma, and cases of intermittent or extended unconsciousness. These injuries can result from various indicative events, including an irrespirable atmosphere or ignitable gas, compromised ventilation controls, and roof instability. b. Section 50.2(h)(6): Accident Definition for Mine Fires. Mine fires have been an ongoing Agency concern. Underground fires can lead to catastrophic consequences under certain conditions. The prior standard required operators to report fires not extinguished within 30 minutes of discovery. Almost all fires occurring in underground mines are extinguished within 30 minutes of discovery. Many of those fires, however, have the potential to cause injury or death, particularly if the underlying causes are not addressed. Knowing the locations of these fires can help miners, mine operators, and MSHA identify problem areas requiring corrective action. In the ETS, MSHA solicited comment on Sec. 50.2(h)(6). MSHA was concerned that some fires extinguished within 30 minutes, such as fires occurring in the same place, can signal a serious or potentially serious hazard. MSHA specifically asked whether the definition should be revised to cover all unplanned underground mine fires, or fires of particular types, duration, or locations. Some commenters supported retaining the existing definition. They said that the 30-minute cut-off is adequate and clear, and there is no compelling reason to change it. They said that fires extinguished in a shorter period of time include many fires that do not present any significant hazard. They said that reporting all fires would be burdensome and involve an unnecessary use of resources. A log was suggested to alleviate the reporting burden. Other commenters, however, said that the definition should be broadened to include all unplanned underground mine fires. These commenters pointed out that fires can be devastating to a mine and the miners. They said that it should not be left up to mine operators to decide how long it takes to extinguish a fire. They said that fires are seriously under-reported. They also said that if fires remain unreported, then the mine operator is less likely to eliminate the source of the problem. Another commenter urged MSHA to consider the issue of belt flammability stating that belt fires ``require escape in many instances.'' The final rule retains the existing requirement for reporting fires for surface mines and surface areas of underground mines. Surface fires do not involve the hazard potential that underground fires present in a confined environment. For unplanned underground fires, the final rule expands the definition of accident to include all fires not extinguished within 10 minutes of discovery. We agree with a commenter who, basing the comment on experience in the Pittsburgh seam, said that 30 minutes is ``entirely too long,'' because a fire that's been burning for 30 minutes can be ``totally out of control.'' Similarly, belt fires that include open flame, smoldering coal, smoking belts, or hot glowing rollers, can be hard to control. MSHA experience and data include a number of belt fires, among them the Alma Aracoma fire on January 19, 2006, that could not be contained by the miners at the scene. MSHA expects that the increased reporting of unplanned underground fires, including belt fires, will help focus attention on problems that need to be identified and corrected before developing into an uncontrollable fire. The requirement to report all underground fires not extinguished within 10 minutes of discovery will address those fires requiring activation of the fire-fighting plan and evacuation of miners. Based on Agency experience and data, MSHA determined that 10 minutes is a reasonable time for attempting to extinguish a fire and to notify the surface. In an underground environment, if miners attempt to fight the fire for 30 minutes and are unsuccessful, the fire will probably become uncontrollable. The revised reporting requirement will result in earlier plan activation as miners will more quickly notify supervisors who can call in firefighting crews while the other miners get out of harm's way. The final rule's requirement to report fires not extinguished within 10 minutes targets fires that can jeopardize safety while excluding minor, nuisance events. 2. Section 50.10 Immediate Notification The final rule retains the requirement in the ETS that mine operators notify MSHA immediately of all reportable accidents. Immediate notification is defined as ``at once without delay and within 15 minutes.'' It is significant to note, however, that the higher penalties, for failing to ``provide timely notification'' to MSHA, apply only to those accidents that are specified in Section 5(a) of the MINER Act. These are accidents that involve ``the death of an individual at the mine, or an injury or entrapment of an individual at the mine which has a reasonable potential to cause death.'' The final rule, like the MINER Act, does not include any exceptions to the 15- minute notification provision. a. Notifying MSHA within 15 Minutes. Before the ETS, the standard required operators to contact MSHA ``immediately'' if an accident occurred. The ETS required that all accidents be reported at once without delay and within 15 minutes, with an exception for lost communications. While many commenters said they supported the goal of notification, they opposed the 15-minute requirement. Commenters said that 15 minutes passes too fast, is too short, and does not allow for the gathering of sufficient information. Instead of 15 minutes, commenters suggested 30 minutes and an hour or more as alternatives. Other commenters suggested that MSHA eliminate any specified time requirement and revert back to the general pre-ETS ``immediately contact'' standard. They said it was flexible, acknowledged those situations where operators ``did the best they could,'' and allowed for ``wiggle room.'' Commenters noted that about 90 percent of the accidents reported to MSHA in 2005 were ``unplanned roof falls at or above the anchorage point, and damage to hoisting equipment,'' and did not involve an injury to a miner. These commenters stated that the 15- minute requirement should not apply in those non-emergency cases, and that MSHA could be overwhelmed with reporting and false alarms. Other commenters stated that the 15-minute requirement should not apply in situations in which the operator had to perform rescue or life-saving actions. Other commenters supported the 15-minute requirement for all accidents. They said that MSHA can best decide what to do with the information it gets. They said the problem is one of under-reporting accidents, not over-reporting. These commenters said that delays in [[Page 71435]] reporting accidents, like the delay in reporting the Sago accident, are unacceptable. The commenters also said that requiring notification within 15 minutes actually aids operators by removing uncertainty concerning when to notify MSHA. As mentioned above, the MINER Act was signed into law on June 15, 2006. Several comments suggested retaining the 15-minute requirement for only the accidents specified in the MINER Act. In addition, commenters suggested limiting that requirement to underground coal mines or including a life saving exception. Other comments, however, supported the 15-minute reporting requirement in the ETS. One commenter said that the sooner individuals with expertise arrive at the scene ``the better the chances for a successful outcome.'' MSHA's experience with implementation of the ETS indicates that the 15-minute requirement for reporting all accidents is working. The operator's reporting of the Darby explosion serves as an example of how timely reporting can result in effective mobilization of emergency response resources. Operators of varying mine sizes and types have been able to meet the 15-minute requirement under the ETS. Some operators may have had to alter their response procedures to ensure quicker notification. Timely reporting can be crucial in emergency, life-threatening situations to activate effective emergency response and rescue. Not only can this be vital to the saving of lives, but it can be instrumental to having expert Agency personnel at the scene with authority to assure that the accident site remains undisturbed and preserved for investigation into causes. For remote operations, it enables MSHA to quickly communicate with local rescue and emergency services. While many reported accidents do not involve an injury or are non-emergencies, they may be near misses or signify a trend or problem that left uncorrected can be extremely hazardous. Fires, explosions, and gas and water inundations are of special concern. In making the decision to retain the notification requirement in the ETS, MSHA considered the dynamic nature of the mining industry. The mining environment is ever-changing; there is always the threat of new hazards or dangers. The reporting of roof falls, unplanned explosions, haulage accidents, or unstable conditions at impoundments, for example, may necessitate critical, pro-active corrective actions and the need for emergency response assistance. The demand for many mining commodities is accelerating. Production growth can push mining into depths with more structural instability. As the chance for encountering older underground works and strata increases, so does the potential for gas and water inundation. Based on MSHA's experience under the ETS, ``within 15 minutes'' provides adequate time for operators to notify MSHA with sufficient information. For example, the mine operator often knows the general character of an event, such as an explosion or inundation, and can report it under the 15-minute requirement before knowing whether a person has been injured or killed or whether the event is life threatening. MSHA's experience and data reveal that reportable accidents are not common. The 15-minute requirement poses no significant increased burden on the mining industry while providing improved protection for miners. A number of commenters stated that having to notify MSHA within 15 minutes could interfere with the operator's rescue efforts and calling 911. They said that operators should not be expected to divert from life saving and emergency activities to phone MSHA. This can arise particularly with small operators who may need to engage any and all available personnel to respond to an emergency. They said there should be an exception for those life saving and emergency activities in addition to the exception for loss of communications. Other commenters, however, disputed the need for any exception. One commenter pointed out that loss of communications in a mine is an indicator of a problem, and the mine operator ``must be required to contact MSHA with the information available to him within the mandatory time frame.'' Some commenters objected to saying that the 15-minute notification requirement could interfere with rescue or life saving. They said operators can anticipate problems in their emergency plans. Moreover, the commenters said that operators can use cell phones, blackberries, or other communication devices, which they readily use to make other calls in emergency situations. One commenter stated that ``[A]ny operator who cannot initiate onsite emergency efforts and call the regulatory agency should not be in the mining business.'' The final rule, like the MINER Act, does not include any exceptions to the 15-minute notification provision, including one for loss of communications. As noted above, some commenters sought an exception for life saving, or for directing rescue efforts. If a situation were to arise involving extenuating circumstances, such as an operator having to choose between saving someone's life and notifying MSHA, enforcement discretion would take those circumstances into account. MSHA does not expect that an operator who has to make a decision between rendering life-saving assistance and calling MSHA would be penalized for providing that assistance. Pointing out that the ETS addressed events in underground coal mines, a few commenters said that the 15-minute notification provision should apply only to underground coal or other underground mines. Other commenters said that MSHA activation of a response team does not usually occur for accidents at surface operations. Consistent with the MINER Act, the final rule does not limit the notification provision to underground mines. Accidents and deaths occur at all types of mines. Surface mines, for example, over the years have suffered numerous fires; serious haulage, equipment, and explosives accidents; electrocutions; highwall failures; explosions; and impoundment failures. Prompt notification focuses MSHA, operators, and miners on problem areas. Even where MSHA does not activate an emergency response, the Agency conducts an investigation. Prompt notification enables MSHA to secure an accident site, preserving vital evidence that can otherwise be easily lost. In addition, prompt notification provides MSHA with data to accurately determine trends and means of prevention. There also was comment on what triggers the 15-minute period. Some commenters said that the MINER Act should be followed literally with one commenter stating that the 15-minute period should commence once the operator ``realizes'' an accident has occurred. While the MINER Act uses ``realizes,'' that commenter conceded that there is ``some ambiguity'' in the term. Consistent with current case law and interpretation of the notification provision, the final rule alternatively uses the clarifying terms ``once the mine operator knows or should know,'' based on the judgment of a reasonable person. MSHA acknowledges that the operator needs time to determine whether an accident has occurred in the first place. As stated in the preamble to the ETS, the Federal Mine Safety and Health Review Commission (FMSHRC) interpreted the notification standard to allow reasonable time for the operator to make that determination. MSHA recognizes that an operator may not know instantly when an accident occurs, but emphasizes that the operator [[Page 71436]] must make that determination promptly, consistent with the underlying purpose of the standard. Thus, an operator, like any reasonable person under the circumstances, is held to know or realize that an accident has occurred. The final rule retains the ETS terms ``at once and without delay,'' which highlight that reporting must be done promptly. Though a commenter said that these terms are synonyms and should be deleted, the terms are dictionary references used by the Commission in defining and emphasizing what is intended by ``immediately.'' [See Consolidation Coal, 11 FMSHRC 1935 at 1938 (October 31, 1989).] ``Immediately'' is to be understood ``in light of the [notification] regulation's command of prompt, vigorous action.'' b. Method of Notification. Many commenters stated that the method of contacting MSHA needed to be improved and streamlined. In the ETS and prior standard, operators were directed to first contact the appropriate MSHA District Office and, failing that, to use a 1-800 number to an MSHA headquarters answering service. Commenters said that this system was often inefficient and time consuming, taking a number of phone calls to accomplish notification. Many commenters advocated a nationwide call center, staffed by knowledgeable persons, where the mine operator could place one call to take care of notification. Other suggestions included a District system of emergency phone numbers with staff coverage 24 hours a day, 7 days per week, or a one-call system to voice mail. MSHA agrees that the system for contacting the Agency needed to be improved. MSHA has acquired a nationwide call system; thus, the final rule eliminates the requirement that mine operators first notify the appropriate District Office. MSHA has set up an improved system that provides a person to answer calls 24 hours per day, 7 days per week. The final rule lists the toll-free number, which is the same number mine operators currently use for notification purposes. Once the mine operator calls the toll-free service, notification is achieved. C. Part 75--Mandatory Safety Standards--Underground Coal Mines This final rule does not address Sec. Sec. 75.350(b)(7), 75.380(n), and 75.383(c), which were deleted in the ETS. The final rule also makes organizational changes and adds paragraph headings and numbers to make specific requirements easier to find and understand, to clarify existing provisions, and to accommodate new and transferred provisions. These non-substantive revisions do not reduce protection for miners. 1. Sections 75.380 and 75.381 Lifelines in Escapeways The final rule retains ETS requirements Sec. Sec. 75.380(d)(7) and 75.381(c)(5) that provide for the use of directional lifelines in both the primary and alternate escapeways for underground bituminous, lignite, and anthracite coal mines. The final rule requires that a continuous, directional lifeline be installed and maintained in each escapeway. The lifeline must: be marked with a reflective material every 25 feet; be located in a manner that allows miners to use it effectively to escape; have tactile directional indicators signifying the direction of escape placed at intervals not exceeding 100 feet; and be attached to and mark the location of stored SCSRs. The final rule also adds a requirement that lifelines be made of flame-resistant material upon replacement, and that all lifelines be flame-resistant no later than June 15, 2009, to conform with Section 2 of the MINER Act. A directional lifeline is generally a rope made of durable material, although the final rule, like the ETS allows an equivalent device, such as a pipe or handrail. Some commenters stated that a track or belt structure could be considered an equivalent device. MSHA has clarified in this final rule that a lifeline must provide tactile feedback to indicate the direction of escape. In an emergency, visibility may be limited and render devices, such as a track or belt structure, ineffective as a means of indicating direction. MSHA is concerned that the mine operator will be unable to attach tactile directional indicators, which are resistant to physical damage, to a track or belt structure. Because tactile directional indicators on a track or belt structure are likely to be damaged during normal mining activities, MSHA does not believe that a track or belt structure would provide safety equivalent to a lifeline and considers them to be unreliable and impractical. In addition, MSHA is concerned that a conveyor belt structure used as a lifeline presents a significant potential hazard to escaping miners, unless the belts are both de- energized and locked-out. Further, a track used as a lifeline would require escaping miners to crawl to use the tactile indicators on the track. a. Continuous Lifeline. The final rule, Sec. Sec. 75.380(d)(7)(i) and 75.381(c)(5)(i), requires that durable, continuous lifelines be installed and maintained in both escapeways leading from the working sections or areas where mechanized mining equipment is being installed or removed. The lifelines must be continuous throughout the entire length of each escapeway to the surface escape drift opening, to the escape shaft or slope facilities to the surface, or to the surface, as applicable. Most commenters supported the installation of lifelines in escapeways. Other commenters expressed concerns that the installation of a lifeline in escapeways where mechanized mining equipment regularly travels could result not only in damage to the lifeline, but a damaged lifeline could become a potential hazard to personnel. MSHA agrees that care needs to be taken when lifelines are installed in escapeways that are also used as travelways for mechanized mining equipment. Installation techniques are available that will permit lifelines to be protected from damage from mobile equipment while still being readily available to miners during emergencies. These provisions remain unchanged from the ETS. b. Flame-Resistant and Reflective. The final rule, Sec. Sec. 75.380(d)(7)(ii) and 75.381(c)(5)(ii), adds new requirements that lifelines be flame-resistant upon replacement of existing lifelines; but in no case later than June 15, 2009. This requirement was added to respond to comments and to conform the final rule with Section 2 of the MINER Act. Many commenters stated that lifelines should be made of flame- resistant material and some suggested that MSHA require lifelines to be flame-resistant. MSHA agrees that flame-resistant lifelines provide an added degree of protection for miners and the final rule requires that lifelines be ``Flame-resistant in accordance with the requirements of part 18 of this chapter upon replacement of existing lifelines; but in no case later than June 15, 2009.'' The flame-resistant requirements contained in part 18 are currently applied to other materials used in mining, such as conveyor belt, hose conduit, and packing gland materials. MSHA has determined that the Agency's requirements for flame-resistant materials are also appropriate for lifelines used in underground coal mines. MSHA anticipates that lifeline manufacturers will be able to meet the flame-resistant requirement under part 18 and will submit products for approval prior to the time specified in the final rule. The final rule, Sec. Sec. 75.380(d)(7)(iii) and 75.381(c)(5)(iii), requires that lifelines be marked with a reflective material every 25 feet, so that miners can locate [[Page 71437]] the lifeline using their cap lamps in low-visibility conditions, such as when smoke is present. No comments were received on these provisions and they remain unchanged from the ETS. c. Lifeline Accessibility. The final rule, Sec. Sec. 75.380(d)(7)(iv) and 75.381(c)(5)(iv), requires that lifelines be positioned so that miners can use them effectively to escape. Proper positioning of the lifeline regarding height, accessibility, and location as determined by mining conditions improves the ability of miners to effectively use lifelines to escape during emergency situations. No comments were received on this provision and it remains unchanged from the ETS. d. Tactile Indicators. The final rule, Sec. Sec. 75.380(d)(7)(v) and 75.381(c)(5)(v), requires that lifelines contain tactile indicators signifying the direction and route of escape, placed at intervals not to exceed 100 feet. In the public hearings, MSHA asked whether ``direction indicators on lifelines [should] be standardized.'' MSHA also asked whether ``the point end of the cone [should] be toward the face?'' Most commenters supported standardization of directional indicators. This provision in the final rule is changed from the ETS to include a new requirement that ``[w]hen cones are used as directional indicators, they shall be installed so that the tapered section points inby.'' This new requirement is consistent with NIOSH's recommendation \2\ and supported by commenters. --------------------------------------------------------------------------- \2\ NIOSH, IC 9481, p. 9, 2005. --------------------------------------------------------------------------- The final rule, Sec. Sec. 75.380(d)(7)(vi) and 75.381(c)(5)(vi), requires that lifelines be ``securely attached to and marked to provide tactile feedback indicating the location of any SCSR storage locations in the escapeways.'' When visibility is restricted during an emergency, tactile feedback is necessary to guide miners to exit the mine and would also be necessary to locate additional SCSR storage along the escapeway. For this reason, the final rule clarifies that the indicator on the lifeline for locating additional SCSRs be tactile. 2. Section 75.383 Escapeway Maps and Drills This final rule transfers existing requirements from Sec. 75.383(a) to a new Sec. 75.1505 and combines Sec. 75.383(b) and ETS Sec. 75.1502(c) into a new, improved and expanded Sec. 75.1504. Therefore, Sec. 75.383 is no longer necessary and the final rule removes it. Section 75.383(b)(1) required all miners to participate in a practice drill every 90 days; but, the miners only had to travel a portion of the escapeways. On the other hand, the drills in Sec. 75.383(b)(2) and (3) required a supervisor and two miners to travel the entire escapeway every 6 weeks. In addition, Sec. 75.383(b)(2) and (3) required the operator to rotate miners for these 6-week drills, so that all miners participated, and to alternate escapeways, so that the escapeways from all sections were traveled to the surface or to the exits at the bottom of the shaft or slope. MSHA has determined that requiring all miners to travel an entire escapeway each quarter provides increased safety for miners and eliminates the need for the 6- week drill requirement. In the opening statement at the public hearings, MSHA stated the Agency's intent to incorporate the drill requirements in Sec. 75.383 with the emergency evacuation drill requirements in ETS Sec. 75.1502(c) and solicited comments on this approach to emergency evacuation drills. Commenters generally supported the elimination of the Sec. 75.383 escapeway drills. In response, the final rule incorporates requirements from Sec. 75.383(b) into Sec. 75.1504 and expands these requirements. These expanded requirements make escapeway drills more realistic and, therefore, more effective. 3. Section 75.1502 Mine Emergency Evacuation and Firefighting Program of Instruction Final rule Sec. 75.1502 contains the requirements for a written plan for conducting the training and drills required under Sec. Sec. 75.1503, 75.1504, and 75.1505. In general, the training plan provisions in ETS Sec. 75.1502(a) become Sec. 75.1502; the firefighting provisions in Sec. 75.1502(b) become Sec. 75.1503; the evacuation training and drill requirements in ETS Sec. 75.1502(c) become Sec. 75.1504; and the mine and escapeway map requirements in Sec. 75.383(a) become Sec. 75.1505. Almost all of the requirements in Sec. 75.1502 are derived from existing requirements. The final rule conforms the program of instruction in Sec. 75.1502 with the requirements added to the quarterly training and drills and annual expectations training in Sec. 75.1504. Commenters were concerned that the ETS had not included miners or miners' representatives in the process for developing emergency mine evacuation training and drills. MSHA anticipates that mine operators will work with miners in developing the program of instruction and implementing the mine emergency evacuation training and drills. a. Introduction to Sec. 75.1502. The final rule retains introductory language from ETS Sec. 75.1502(a); adjusts the frequency of training and drills from every 90 days to quarterly; defines the quarter based on a calendar year; and includes new implementing language. This new implementing language requires that operators submit a revised program of instruction to MSHA for approval by February 6, 2007, and initiate the revised training within 30 days of plan approval. In the final rule, MSHA adjusts the frequency of training and drills from every 90 days to quarterly in response to comments and to provide flexibility. MSHA recognizes that some training is more appropriately given in a classroom or a simulated mining environment. Added flexibility in scheduling will allow operators time to give all miners this critical training and drills quarterly. An operator may find it more convenient to schedule training and drills over several days or weeks depending on the availability of instructors, training equipment, or facilities. Under the final rule, operators will have the flexibility to conduct quarterly mine emergency evacuation training and drills, either the first, second, or third month of the quarter. The month in which a miner completes mine emergency evacuation training and drills, in effect, becomes that miner's ``anniversary'' month for this quarterly training. For example, a miner receiving quarterly mine emergency training and drills in January, the first month of the first quarter, is required to complete the second quarterly training no later than the end of April, the first month of the second quarter. If a miner completes the training before that miner's anniversary month, then the month the training and drills were completed establishes a new anniversary month for subsequent training and drills. This is consistent with MSHA policy for part 48 annual refresher training. Commenters suggested that the requirement for emergency evacuation drills be changed from every 90 days to quarterly. One commenter suggested that training during a specific month each quarter would allow for more effective scheduling of people and resources. Another commenter stated that switching to quarterly training would make it easier to schedule training in a timely manner if the miner misses a drill. This commenter stated that, if a miner is off, more flexibility allows the operator time to schedule makeup training and still be in compliance. [[Page 71438]] The final rule's change in mine emergency evacuation training and drills from every 90 days to quarterly increases flexibility, makes recordkeeping easier, and better ensures that all miners participate quarterly. b. Section 75.1502(a) and (b): Program Approval and New or Revised Provisions. The final rule Sec. Sec. 75.1502(a) and (b) retain the requirements in ETS Sec. 75.1502(a)(3). Like the ETS, the final rule requires the operator to submit a program of instruction, and any revisions, for approval to the District Manager of the Coal Mine Safety and Health district in which the mine is located. Before implementing any new or revised approved plan provision, the operator must instruct miners in the changes. c. Section 75.1502(c): Instruction Plan Contents. The final rule has consolidated the requirements for mine emergency evacuation training and drills from 30 CFR 48.8 and part 75 in the instruction plan under final Sec. 75.1502. Contents of the instruction plan include: Mine and escapeway maps; evacuation and firefighting plans; locations of abandoned areas, escapeways, exits, and routes of travel to the surface; and the location and use of firefighting and fire suppression equipment and materials. Although MSHA considers consolidation of these requirements to be an administrative change, it improves an operator's ability to provide more comprehensive and effective evacuation training and drills. The final rule retains the existing requirements from ETS Sec. 75.1502(a)(1); includes evacuation-related training requirements from Sec. 48.8; enhances the scenario training; and requires annual expectations training. Like the ETS, the final rule requires operators to develop scenarios for mine emergencies, including fires, explosions, and gas or water inundations, and to develop best options for evacuation under each type of emergency. Under the final rule, scenarios must include conditions in the mine or circumstances that require immediate donning of self-rescue devices. In response to questions, the final rule clarifies that scenarios must also include a discussion of options and a decision as to the best option in each situation. To ensure that the scenarios address the various conditions that miners may encounter in the event of an emergency, the final rule, Sec. 75.1502(c)(2)(ii), includes more examples. It clarifies that the scenarios must include, as applicable, instruction in locating and using continuous directional lifelines, tethers, and doors; traversing undercasts or overcasts; and switching escapeways. MSHA includes this requirement to emphasize the importance of using scenarios to conduct mine emergency evacuation drills so that miners will be familiarized with emergency equipment, including conditions that may be encountered in escaping the mine. The final rule retains and combines the requirements of ETS Sec. 75.1502(a)(1)(v) and (vi) in Sec. 75.1502(c)(3). This provision requires training on the operation of fire suppression equipment and the location and use of firefighting equipment and materials. These requirements are unchanged from the ETS. ETS Sec. 75.1502(a)(1)(vii) required training on the location of escapeways, exits, and routes of travel to the surface, including the location [and use] of continuous directional lifelines or equivalent devices. The final rule retains this requirement in Sec. 75.1502(c)(4) and transfers training on the use of lifelines to evacuation scenarios in Sec. 75.1502(c)(2)(ii). ETS Sec. 75.1502(a)(1)(viii) required that the instruction plan include training on the locations, quantity, types, and use of stored SCSRs, if applicable. The final rule retains this requirement in Sec. 75.1502(c)(5). This provision will help assure that miners receive appropriate donning and transfer training on all applicable SCSRs. Annual refresher training in Sec. 48.8(b)(4) requires a review of the mine map; the escapeway system; the escape, firefighting, and emergency evacuation plans in effect at the mine; and the location of abandoned areas. The final rule transfers this training requirement to Sec. 75.1502(c)(6) for underground coal miners. Miners who receive this training as part of their quarterly drills under 30 CFR 75.1504(b)(4) are not required to take it under part 48. The Agency transferred this provision so that emergency evacuation training and drills would be consolidated in part 75. Final rule Sec. 75.1502(c)(7) includes a new provision requiring operators to describe how miners will receive annual expectations training, which is an integral component of mine emergency evacuation training. This new provision complements the integrated approach to training as reflected in the mine emergency evacuation drill requirement in final Sec. 75.1504. MSHA addresses commenters' concerns about Sec. 75.1502 Mine Emergency Evacuation and Firefighting Program of Instruction in Sec. 75.1504 Mine Emergency Evacuation Training and Drills, which addresses the implementation of this program of instruction. d. Section 75.1502(d): Instructors. Final rule Sec. 75.1502(d) retains unchanged ETS Sec. 75.1502(a)(2) that requires operators to designate persons with the appropriate abilities, training, knowledge, or experience to provide training and conduct mine emergency evacuation drills in his or her area of expertise. The final rule also retains the ETS requirement that persons conducting SCSR donning and transferring training must be able to effectively train and evaluate whether miners can successfully don the SCSR and transfer between all applicable SCSR devices. MSHA experience and NIOSH research \3\ indicate that, in an emergency, effectively trained miners are more likely to recall needed knowledge and skills. NIOSH recognizes that a key component of effective training is the instructor's ability to communicate their knowledge and skills to others and to evaluate performance. Further, NIOSH states that good trainers must have extensive knowledge or competence in the task or job they are teaching. There were no comments on this provision. -----------------------------------------------------------------------