Justia Regulation Tracker

---

[Federal Register: May 2, 2008 (Volume 73, Number 86)]
[Notices]               
[Page 24212-24213]
From the Federal Register Online via GPO Access [wais.access.gpo.gov]
[DOCID:fr02my08-33]                         

-----------------------------------------------------------------------

DEPARTMENT OF AGRICULTURE

Agricultural Marketing Service

[Docket  AMS-FV-07-0036; FV-06-318-C]

 
United States Standards for Grades of Pineapples

AGENCY: Agricultural Marketing Service, USDA.

ACTION: Final notice; correction.

-----------------------------------------------------------------------

SUMMARY: A notice was published in the Federal Register (73 FR 7245-
7246) dated February 7, 2008, revising the United States Standards for 
Grades of Pineapples, issued under the Agricultural Marketing Act of 
1946 (7 U.S.C. 1621-1627) effective March 10, 2008. However, in section 
51.1489, Application of Tolerances, the words ``packages'' and 
``containers'' were incorrectly listed. The correct words should have 
been ``samples'' and ``sample.'' This document corrects the standards 
by revising this section.

[[Page 24213]]

EFFECTIVE DATE: May 2, 2008.

FOR FURTHER INFORMATION CONTACT: Vincent J. Fusaro, Standardization 
Section, Fresh Products Branch, Fruit and Vegetable Programs, 
Agricultural Marketing Service, U.S. Department of Agriculture, 1400 
Independence Ave., SW., Room 1661, South Building, Stop 0240, 
Washington, DC 20250-0240, Fax (202) 720-8871, Phone (202) 720-2185, or 
E-mail Vinny.Fusaro@usda.gov.

SUPPLEMENTARY INFORMATION: This document provides correcting amendments 
to the United States Standards for Grades of Pineapples, which is 
available at the address cited in the FOR FURTHER INFORMATION CONTACT 
section or by accessing the AMS, Fresh Products Branch Web site at: 
http://www.ams.usda.gov/standards/stanfrfv.htm. Accordingly, the United 
States Standards for Grades of Pineapples is corrected by changing 
section 51.1489, Application of Tolerance as follows: ``The contents of 
individual samples in the lot, are subject to the following 
limitations: (a) Individual samples shall have not more than double a 
specified tolerance except that at least two defective specimens may be 
permitted in any sample: Provided, That no more than one specimen 
affected by decay be permitted in any sample, and provided further, 
that the averages for the entire lot are within the tolerances 
specified for the grades.''

    Dated: April 28, 2008.
Lloyd C. Day,
Administrator, Agricultural Marketing Service.
[FR Doc. E8-9649 Filed 5-1-08; 8:45 am]

BILLING CODE 3410-02-P