Federal Aviation Administration 2024 – Federal Register Recent Federal Regulation Documents
Results 401 - 412 of 412
IFR Altitudes; Miscellaneous Amendments
This amendment adopts miscellaneous amendments to the required IFR (instrument flight rules) altitudes and changeover points for certain Federal airways, jet routes, or direct routes for which a minimum or maximum en route authorized IFR altitude is prescribed. This regulatory action is needed because of changes occurring in the National Airspace System. These changes are designed to provide for the safe and efficient use of the navigable airspace under instrument conditions in the affected areas.
Airworthiness Directives; WACO Classic Aircraft Corporation Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain WACO Classic Aircraft Corporation Model 2T-1A-2 airplanes. This AD was prompted by reports of multiple types of cracks at the leading edge former ribs and trailing edge former ribs in the upper wing center section. This AD requires installing maneuver restriction placards in the front and rear cockpits, inspecting the leading and trailing edge former ribs for cracking, replacing any cracked ribs, modifying the upper wing center section assembly, and removing the maneuver restriction placards after completing the modification. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Rolls-Royce Deutschland Ltd & Co KG Engines
The FAA is adopting a new airworthiness directive (AD) for all Rolls-Royce Deutschland Ltd & Co KG (RRD) Model Trent 1000-AE3, Trent 1000-CE3, Trent 1000-D3, Trent 1000-G3, Trent 1000-H3, Trent 1000-J3, Trent 1000-K3, Trent 1000-L3, Trent 1000-M3, Trent 1000-N3, Trent 1000- P3, Trent 1000-Q3, and Trent 1000-R3 engines. This AD is prompted by a determination that certain intervals for visual inspection of the intermediate-pressure stage 8 (IP8) and high-pressure stage 3 (HP3) air transfer tubes and front bearing housing IP8 air feed tubes need to be reduced. This AD requires initial and repetitive visual inspections of the IP8 and HP3 air transfer tubes and front bearing housing IP8 air feed tubes for cracking, damage, or air leakage wear, and replacement, if necessary, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference (IBR). The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; The Boeing Company Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain The Boeing Company Model 787-8, 787-9, and 787-10 airplanes. This AD was prompted by a reported quality escapement where the seat track fitting nuts were under-torqued on some flight attendant seats in production. This AD requires re-torquing each free-standing attendant seat track fitting nut. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Airbus SAS Airplanes
The FAA is adopting a new airworthiness directive (AD) for all Airbus SAS Model A318, A319, A321, A330-200, A330-200 Freighter, A330- 300, A330-800, A330-900, A340-200, and A340-300 series airplanes; Model A320-211, -212, -214, -216, -231, -232, -233, -251N, -252N, -253N, - 271N, -272N, and -273N airplanes; and Model A340-541 and A340-642 airplanes. This AD was prompted by a report that a production deficiency of some SafeLav gaseous oxygen container (SLGOC) batches was identified during production testing of newly manufactured oxygen containers. This AD requires replacing affected SLGOCs and prohibiting the installation of affected SLGOCs, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Dassault Aviation Airplanes
The FAA is superseding Airworthiness Directive (AD) 2023-04- 10, which applied to all Dassault Aviation Model MYSTERE-FALCON 900 airplanes. AD 2023-04-10 required revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations. This AD was prompted by a determination that new or more restrictive airworthiness limitations are necessary. This AD continues to require the actions in AD 2023-04- 10, and requires revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations; as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Saab AB, Support and Services (Formerly Known as Saab AB, Saab Aeronautics) Airplanes
The FAA is adopting a new airworthiness directive (AD) for all Saab AB, Support and Services Model SAAB 2000 airplanes. This AD was prompted by a review of the anti-skid system that revealed the possibility of inadvertently connecting the inboard harness to the outboard channel (and vice versa) of the wheel speed transducers in the main landing gear (MLG) wheel axles. This AD requires installing color markings on the harnesses and the wheel axles, to ensure proper installation and connection of the anti-skid harnesses, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Airbus SAS Airplanes
The FAA is superseding Airworthiness Directive (AD) 2022-08- 04, which applied to all Airbus SAS Model A300 series airplanes. AD 2022-08-04 required revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations. Since the FAA issued AD 2022-08-04, the FAA has determined new or more restrictive airworthiness limitations are necessary. This AD continues to require the actions of AD 2022-08-04, and requires new or more restrictive airworthiness limitations, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; MHI RJ Aviation ULC (Type Certificate Previously Held by Bombardier, Inc.) Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain MHI RJ Model CL-600-2C10 (Regional Jet Series 700, 701 & 702), CL-600-2C11 (Regional Jet Series 550), CL-600-2D15 (Regional Jet Series 705), CL-600-2D24 (Regional Jet Series 900), and CL-600-2E25 (Regional Jet Series 1000) airplanes. This AD was prompted by a report of a passenger seat Y-belt (lap belt) re-installed in the wrong orientation, due to an incorrect maintenance manual. This AD requires inspecting certain Y-belts for correct installation and damage and corrective actions if necessary. This AD also prohibits the use of certain revisions of a maintenance task. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Bombardier, Inc., Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Bombardier, Inc., Model BD-700-1A10 and BD-700-1A11 airplanes. This AD was prompted by reports that the nose wheel steering selector valve (SSV) can be slow to deactivate under low temperature conditions. This AD requires replacing the affected SSV with a re-designed SSV that has an improved response time. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Airbus SAS Airplanes
The FAA is adopting a new airworthiness directive (AD) for all Airbus SAS Model A310 airplanes. This AD was prompted by a determination that new or more restrictive airworthiness limitations are necessary. This AD requires revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Criteria: Special Class Airworthiness Criteria for the Blackshape S.p.A., Model BK160-200 Very Light Airplane
The FAA announces the availability of, and requests comments on, the proposed airworthiness criteria for the Blackshape S.p.A., Model BK160-200 Very Light Airplane (VLA). This document proposes the airworthiness criteria that the FAA finds to be appropriate and applicable for the VLA design.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
