Cut-to-Length Carbon-Quality Steel Plate From India, Indonesia, and Korea; Scheduling of Full Five-Year Reviews; Correction, 39133 [2017-17370]
Download as PDF
sradovich on DSK3GMQ082PROD with NOTICES
Federal Register / Vol. 82, No. 158 / Thursday, August 17, 2017 / Notices
directly competitive articles in the
United States, or United States
consumers.
In particular, the Commission is
interested in comments that:
(i) Explain how the articles
potentially subject to the requested
remedial orders are used in the United
States;
(ii) identify any public health, safety,
or welfare concerns in the United States
relating to the requested remedial
orders;
(iii) identify like or directly
competitive articles that complainant,
its licensees, or third parties make in the
United States which could replace the
subject articles if they were to be
excluded;
(iv) indicate whether complainant,
complainant’s licensees, and/or third
party suppliers have the capacity to
replace the volume of articles
potentially subject to the requested
exclusion order and/or a cease and
desist order within a commercially
reasonable time; and
(v) explain how the requested
remedial orders would impact United
States consumers.
Written submissions must be filed no
later than by close of business, eight
calendar days after the date of
publication of this notice in the Federal
Register. There will be further
opportunities for comment on the
public interest after the issuance of any
final initial determination in this
investigation.
Persons filing written submissions
must file the original document
electronically on or before the deadlines
stated above and submit 8 true paper
copies to the Office of the Secretary by
noon the next day pursuant to § 210.4(f)
of the Commission’s Rules of Practice
and Procedure (19 CFR 210.4(f)).
Submissions should refer to the docket
number (‘‘Docket No. 3243’’) in a
prominent place on the cover page and/
or the first page. (See Handbook for
Electronic Filing Procedures, Electronic
Filing Procedures 1). Persons with
questions regarding filing should
contact the Secretary (202–205–2000).
Any person desiring to submit a
document to the Commission in
confidence must request confidential
treatment. All such requests should be
directed to the Secretary to the
Commission and must include a full
statement of the reasons why the
Commission should grant such
treatment. See 19 CFR 201.6. Documents
for which confidential treatment by the
1 Handbook
for Electronic Filing Procedures:
https://www.usitc.gov/documents/handbook_on_
filing_procedures.pdf.
VerDate Sep<11>2014
19:44 Aug 16, 2017
Jkt 241001
Commission is properly sought will be
treated accordingly. All such requests
should be directed to the Secretary to
the Commission and must include a full
statement of the reasons why the
Commission should grant such
treatment. See 19 CFR 201.6. Documents
for which confidential treatment by the
Commission is properly sought will be
treated accordingly. All information,
including confidential business
information and documents for which
confidential treatment is properly
sought, submitted to the Commission for
purposes of this Investigation may be
disclosed to and used: (i) By the
Commission, its employees and Offices,
and contract personnel (a) for
developing or maintaining the records
of this or a related proceeding, or (b) in
internal investigations, audits, reviews,
and evaluations relating to the
programs, personnel, and operations of
the Commission including under 5
U.S.C. Appendix 3; or (ii) by U.S.
government employees and contract
personnel,2 solely for cybersecurity
purposes. All nonconfidential written
submissions will be available for public
inspection at the Office of the Secretary
and on EDIS.3
This action is taken under the
authority of section 337 of the Tariff Act
of 1930, as amended (19 U.S.C. 1337),
and of §§ 201.10 and 210.8(c) of the
Commission’s Rules of Practice and
Procedure (19 CFR 201.10, 210.8(c)).
By order of the Commission.
Issued: August 11, 2017.
Lisa R. Barton,
Secretary to the Commission.
[FR Doc. 2017–17377 Filed 8–16–17; 8:45 am]
39133
37465). The day of the hearing should
be Wednesday, December 20, 2017.
Correction
In the Federal Register of August 10,
2017, in FR Doc. 17–16893, on page
37466, in the second column, in the
fourth paragraph, under the heading
Hearing, in the fourth line, correct
‘‘Thursday, December 20, 2017’’ to read
‘‘Wednesday, December 20, 2017’’.
Issued: August 11, 2017.
Lisa R. Barton,
Secretary to the Commission.
[FR Doc. 2017–17370 Filed 8–16–17; 8:45 am]
BILLING CODE P7020–02–P
INTERNATIONAL TRADE
COMMISSION
[Investigation Nos. 701–TA–563 and 731–
TA–1331–1332 (Final)]
Finished Carbon Steel Flanges From
India and Italy; Determinations
On the basis of the record 1 developed
in the subject investigations, the United
States International Trade Commission
(‘‘Commission’’) determines, pursuant
to the Tariff Act of 1930 (‘‘the Act’’),
that an industry in the United States is
materially injured by reason of imports
of finished carbon steel flanges from
India and Italy, provided for in
subheading 7307.91.50 of the
Harmonized Tariff Schedule of the
United States, that have been found by
the Department of Commerce
(‘‘Commerce’’) to be sold in the United
States at less than fair value (‘‘LTFV’’),
and to be subsidized by the government
of India.
BILLING CODE P7020–02–P
INTERNATIONAL TRADE
COMMISSION
[Investigation Nos. 701–TA–388, 389, and
391 and 731–TA–817, 818, and 821 (Third
Review)]
Cut-to-Length Carbon-Quality Steel
Plate From India, Indonesia, and
Korea; Scheduling of Full Five-Year
Reviews; Correction
U.S. International Trade
Commission.
ACTION: Correction of notice.
AGENCY:
Correction is made to the
December 20, 2017 hearing day in the
Hearing section of the notice which was
published on August 10, 2017 (82 FR
SUMMARY:
2 All contract personnel will sign appropriate
nondisclosure agreements.
3 Electronic Document Information System
(EDIS): https://edis.usitc.gov.
PO 00000
Frm 00031
Fmt 4703
Sfmt 4703
Background
The Commission, pursuant to sections
705(b) and 735(b) of the Act (19 U.S.C.
1671d(b) and 19 U.S.C. 1673d(b)),
instituted these investigations effective
June 30, 2016, following receipt of a
petition filed with the Commission and
Commerce by Weldbend Corporation,
Argo, Illinois and Boltex Mfg. Co., L.P.,
Houston, Texas. The final phase of the
investigations was scheduled by the
Commission following notification of
preliminary determinations by
Commerce that imports of finished
carbon steel flanges from India were
subsidized within the meaning of
section 703(b) of the Act (19 U.S.C.
1671b(b)) and that imports of finished
carbon steel flanges from India and Italy
were sold at LTFV within the meaning
of 733(b) of the Act (19 U.S.C. 1673b(b)).
1 The record is defined in sec. 207.2(f) of the
Commission’s Rules of Practice and Procedure (19
CFR 207.2(f)).
E:\FR\FM\17AUN1.SGM
17AUN1
Agencies
[Federal Register Volume 82, Number 158 (Thursday, August 17, 2017)]
[Notices]
[Page 39133]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2017-17370]
-----------------------------------------------------------------------
INTERNATIONAL TRADE COMMISSION
[Investigation Nos. 701-TA-388, 389, and 391 and 731-TA-817, 818, and
821 (Third Review)]
Cut-to-Length Carbon-Quality Steel Plate From India, Indonesia,
and Korea; Scheduling of Full Five-Year Reviews; Correction
AGENCY: U.S. International Trade Commission.
ACTION: Correction of notice.
-----------------------------------------------------------------------
SUMMARY: Correction is made to the December 20, 2017 hearing day in the
Hearing section of the notice which was published on August 10, 2017
(82 FR 37465). The day of the hearing should be Wednesday, December 20,
2017.
Correction
In the Federal Register of August 10, 2017, in FR Doc. 17-16893, on
page 37466, in the second column, in the fourth paragraph, under the
heading Hearing, in the fourth line, correct ``Thursday, December 20,
2017'' to read ``Wednesday, December 20, 2017''.
Issued: August 11, 2017.
Lisa R. Barton,
Secretary to the Commission.
[FR Doc. 2017-17370 Filed 8-16-17; 8:45 am]
BILLING CODE P7020-02-P