[Investigation Nos. 701-TA-563 and 731-TA-1331-1332 (Final)] HEADFinished Carbon Steel Flanges From India and Italy; Supplemental Schedule for the Subject Investigations, 32012 [2017-14498]

Download as PDF 32012 Federal Register / Vol. 82, No. 131 / Tuesday, July 11, 2017 / Notices filing posthearing briefs is November 2, 2017. In addition, any person who has not entered an appearance as a party to the investigations may submit a written statement of information pertinent to the subject of the investigations, including statements of support or opposition to the petition, on or before November 2, 2017. On November 22, 2017, the Commission will make available to parties all information on which they have not had an opportunity to comment. Parties may submit final comments on this information on or before November 27, 2017, but such final comments must not contain new factual information and must otherwise comply with section 207.30 of the Commission’s rules. All written submissions must conform with the provisions of section 201.8 of the Commission’s rules; any submissions that contain BPI must also conform with the requirements of sections 201.6, 207.3, and 207.7 of the Commission’s rules. The Commission’s Handbook on E-Filing, available on the Commission’s Web site at https://www.usitc.gov/ secretary/documents/handbook_on_ filing_procedures.pdf, elaborates upon the Commission’s rules with respect to electronic filing. Additional written submissions to the Commission, including requests pursuant to section 201.12 of the Commission’s rules, shall not be accepted unless good cause is shown for accepting such submissions, or unless the submission is pursuant to a specific request by a Commissioner or Commission staff. In accordance with sections 201.16(c) and 207.3 of the Commission’s rules, each document filed by a party to the investigations must be served on all other parties to the investigations (as identified by either the public or BPI service list), and a certificate of service must be timely filed. The Secretary will not accept a document for filing without a certificate of service. mstockstill on DSK30JT082PROD with NOTICES Authority: These investigations are being conducted under authority of title VII of the Tariff Act of 1930; this notice is published pursuant to section 207.21 of the Commission’s rules. By order of the Commission. Issued: July 6, 2017. Lisa R. Barton, Secretary to the Commission. [FR Doc. 2017–14499 Filed 7–10–17; 8:45 am] BILLING CODE 7020–02–P VerDate Sep<11>2014 18:01 Jul 10, 2017 Jkt 241001 INTERNATIONAL TRADE COMMISSION [Investigation Nos. 701–TA–563 and 731–TA–1331–1332 (Final)] Finished Carbon Steel Flanges From India and Italy; Supplemental Schedule for the Subject Investigations United States International Trade Commission. ACTION: Notice. AGENCY: DATES: Effective June 29, 2017. FOR FURTHER INFORMATION CONTACT: Drew Dushkes (202–205–3229), Office of Investigations, U.S. International Trade Commission, 500 E Street SW., Washington, DC 20436. Hearingimpaired persons can obtain information on this matter by contacting the Commission’s TDD terminal on 202– 205–1810. Persons with mobility impairments who will need special assistance in gaining access to the Commission should contact the Office of the Secretary at 202–205–2000. General information concerning the Commission may also be obtained by accessing its internet server (https:// www.usitc.gov). The public record for these investigations may be viewed on the Commission’s electronic docket (EDIS) at https://edis.usitc.gov. SUPPLEMENTARY INFORMATION: Effective February 8, 2017, the Commission established a general schedule for the conduct of the final phase of its investigations on finished carbon steel flanges from India, Italy, and Spain.1 The Department of Commerce’s preliminary determinations for imports from India and Italy were published on November 29, 2016 and February 8, 2017.2 The Department of Commerce’s final determinations for imports from India and Italy were published on June 29, 2017.3 The Commission, therefore, is 1 Finished Carbon Steel Flanges from India, Italy and Spain; Scheduling of the Final Phase of Countervailing Duty and Antidumping Duty Investigations, 82 FR 11056, February 17, 2017. 2 Finished Carbon Steel Flanges from India: Preliminary Affirmative Countervailing Duty Determination, 81 FR 85928, November 29, 2016; Finished Carbon Steel Flanges from Italy: Preliminary Determination of Sales at Less Than Fair Value and Postponement of Final Determination, 82 FR 9711, February 8, 2017; Finished Carbon Steel Flanges from India: Preliminary Determination of Sales at Less Than Fair Value and Postponement of Final Determination, 21 FR 9719, February 8, 2017. 3 Finished Carbon Steel Flanges from India: Final Affirmative Countervailing Duty Determination, 82 FR 29479, June 29, 2017; Finished Carbon Steel Flanges from Italy: Final Determination of Sales at Less Than Fair Value, 82 FR 29481, June 29, 2017; Finished Carbon Steel Flanges from India: Final Determination of Sales at Less Than Fair Value, 82 FR 29483, June 29, 2017. PO 00000 Frm 00080 Fmt 4703 Sfmt 4703 issuing a supplemental schedule for its investigations on imports of finished carbon steel flanges from India and Italy. The Commission’s supplemental schedule is as follows: The deadline for filing supplemental party comments on Commerce’s final determinations is July 11, 2017; the staff report in the final phase of these investigations will be placed in the nonpublic record on July 21, 2017; and a public version will be issued thereafter. Supplemental party comments may address only Commerce’s final determinations regarding imports from India and Italy. These supplemental final comments may not contain new factual information and may not exceed five (5) pages in length. For further information concerning these investigations see the Commission’s notice cited above and the Commission’s Rules of Practice and Procedure, part 201, subparts A and B (19 CFR part 201), and part 207, subparts A and C (19 CFR part 207). Authority: These investigations are being conducted under authority of title VII of the Tariff Act of 1930; this notice is published pursuant to section 207.21 of the Commission’s rules. By order of the Commission. Issued: July 6, 2017. Lisa R. Barton, Secretary to the Commission. [FR Doc. 2017–14498 Filed 7–10–17; 8:45 am] BILLING CODE 7020–02–P NATIONAL AERONAUTICS AND SPACE ADMINISTRATION [Notice: (17–049)] NASA Advisory Council; Meeting National Aeronautics and Space Administration. ACTION: Notice of meeting. AGENCY: In accordance with the Federal Advisory Committee Act, as amended, the National Aeronautics and Space Administration (NASA) announces a meeting of the NASA Advisory Council (NAC). DATES: Thursday, July 27, 2017, 9:00 a.m.–5:15 p.m. EDT. Friday, July 28, 2017, 9:00 a.m.–11:30 a.m. EDT. ADDRESSES: National Institute of Aerospace, Room 101, 100 Exploration Way, Hampton, VA 23666. FOR FURTHER INFORMATION CONTACT: Ms. Marla King, NAC Administrative Officer, NASA Headquarters, Washington, DC 20546, (202) 358–1148. SUPPLEMENTARY INFORMATION: This meeting will be open to the public up SUMMARY: E:\FR\FM\11JYN1.SGM 11JYN1

Agencies

[Federal Register Volume 82, Number 131 (Tuesday, July 11, 2017)]
[Notices]
[Page 32012]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2017-14498]


-----------------------------------------------------------------------

INTERNATIONAL TRADE COMMISSION


[Investigation Nos. 701-TA-563 and 731-TA-1331-1332 (Final)]

Finished Carbon Steel Flanges From India and Italy; Supplemental 
Schedule for the Subject Investigations

AGENCY: United States International Trade Commission.

ACTION: Notice.

-----------------------------------------------------------------------

DATES: Effective June 29, 2017.

FOR FURTHER INFORMATION CONTACT:  Drew Dushkes (202-205-3229), Office 
of Investigations, U.S. International Trade Commission, 500 E Street 
SW., Washington, DC 20436. Hearing-impaired persons can obtain 
information on this matter by contacting the Commission's TDD terminal 
on 202-205-1810. Persons with mobility impairments who will need 
special assistance in gaining access to the Commission should contact 
the Office of the Secretary at 202-205-2000. General information 
concerning the Commission may also be obtained by accessing its 
internet server (https://www.usitc.gov). The public record for these 
investigations may be viewed on the Commission's electronic docket 
(EDIS) at https://edis.usitc.gov.

SUPPLEMENTARY INFORMATION: Effective February 8, 2017, the Commission 
established a general schedule for the conduct of the final phase of 
its investigations on finished carbon steel flanges from India, Italy, 
and Spain.\1\ The Department of Commerce's preliminary determinations 
for imports from India and Italy were published on November 29, 2016 
and February 8, 2017.\2\ The Department of Commerce's final 
determinations for imports from India and Italy were published on June 
29, 2017.\3\ The Commission, therefore, is issuing a supplemental 
schedule for its investigations on imports of finished carbon steel 
flanges from India and Italy.
---------------------------------------------------------------------------

    \1\ Finished Carbon Steel Flanges from India, Italy and Spain; 
Scheduling of the Final Phase of Countervailing Duty and Antidumping 
Duty Investigations, 82 FR 11056, February 17, 2017.
    \2\ Finished Carbon Steel Flanges from India: Preliminary 
Affirmative Countervailing Duty Determination, 81 FR 85928, November 
29, 2016; Finished Carbon Steel Flanges from Italy: Preliminary 
Determination of Sales at Less Than Fair Value and Postponement of 
Final Determination, 82 FR 9711, February 8, 2017; Finished Carbon 
Steel Flanges from India: Preliminary Determination of Sales at Less 
Than Fair Value and Postponement of Final Determination, 21 FR 9719, 
February 8, 2017.
    \3\ Finished Carbon Steel Flanges from India: Final Affirmative 
Countervailing Duty Determination, 82 FR 29479, June 29, 2017; 
Finished Carbon Steel Flanges from Italy: Final Determination of 
Sales at Less Than Fair Value, 82 FR 29481, June 29, 2017; Finished 
Carbon Steel Flanges from India: Final Determination of Sales at 
Less Than Fair Value, 82 FR 29483, June 29, 2017.
---------------------------------------------------------------------------

    The Commission's supplemental schedule is as follows: The deadline 
for filing supplemental party comments on Commerce's final 
determinations is July 11, 2017; the staff report in the final phase of 
these investigations will be placed in the nonpublic record on July 21, 
2017; and a public version will be issued thereafter.
    Supplemental party comments may address only Commerce's final 
determinations regarding imports from India and Italy. These 
supplemental final comments may not contain new factual information and 
may not exceed five (5) pages in length.
    For further information concerning these investigations see the 
Commission's notice cited above and the Commission's Rules of Practice 
and Procedure, part 201, subparts A and B (19 CFR part 201), and part 
207, subparts A and C (19 CFR part 207).

    Authority: These investigations are being conducted under 
authority of title VII of the Tariff Act of 1930; this notice is 
published pursuant to section 207.21 of the Commission's rules.

    By order of the Commission.

    Issued: July 6, 2017.
Lisa R. Barton,
Secretary to the Commission.
[FR Doc. 2017-14498 Filed 7-10-17; 8:45 am]
 BILLING CODE 7020-02-P
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.