Carbon and Alloy Steel Cut-to-Length Plate From Austria, Belgium, France, Germany, Italy, Japan, Korea, and Taiwan, 23592 [2017-10517]

Download as PDF 23592 Federal Register / Vol. 82, No. 98 / Tuesday, May 23, 2017 / Notices ‘‘Agreement’’). On April 25, 2017, OUII filed a response supporting the Motion. The Commission has determined that the Motion complies with the requirements of section 210.21(b)(1) of the Commission’s Rules of Practice and Procedure (19 CFR 210.21(b)(1)), and that there are no extraordinary circumstances that would prevent the requested termination. The Commission also finds that granting the Motion would not be contrary to the public interest pursuant to section 210.50(b)(2) of the Commission’s Rules of Practice and Procedure (19 CFR 210.50(b)(2)). Accordingly, the Commission hereby grants the Motion. This investigation is terminated. The authority for the Commission’s determination is contained in section 337 of the Tariff Act of 1930, as amended (19 U.S.C. 1337), and in part 210 of the Commission’s Rules of Practice and Procedure (19 CFR part 210). By order of the Commission. Issued: May 18, 2017. Lisa R. Barton, Secretary to the Commission. [FR Doc. 2017–10518 Filed 5–22–17; 8:45 am] BILLING CODE 7020–02–P INTERNATIONAL TRADE COMMISSION [Investigation Nos. 701–TA–561 and 731– TA–1317–1318, 1321–1325, and 1327 (Final)] Carbon and Alloy Steel Cut-to-Length Plate From Austria, Belgium, France, Germany, Italy, Japan, Korea, and Taiwan sradovich on DSK3GMQ082PROD with NOTICES Determination On the basis of the record 1 developed in the subject investigations, the United States International Trade Commission (‘‘Commission’’) determines, pursuant to the Tariff Act of 1930 (‘‘the Act’’), that an industry in the United States is materially injured by reason of imports of carbon and alloy steel cut-to-length plate from Austria, Belgium, France, Germany, Italy, Japan, Korea, and Taiwan, provided for in subheadings 7208.40.30, 7208.51.00, 7208.52.00, 7211.13.00, 7211.14.00, 7225.40.11, 7225.40.30, 7226.20.00, and 7226.91.50 of the Harmonized Tariff Schedule of the United States, that have been found by the Department of Commerce (‘‘Commerce’’) to be sold in the United States at less than fair value (‘‘LTFV’’) 1 The record is defined in sec. 207.2(f) of the Commission’s Rules of Practice and Procedure (19 CFR 207.2(f)). VerDate Sep<11>2014 21:15 May 22, 2017 Jkt 241001 and imports of the subject merchandise subsidized by the government of Korea.2 INTERNATIONAL TRADE COMMISSION Background [Investigation No. 337–TA–1057] The Commission, pursuant to section 735(b) of the Act (19 U.S.C. 1673d(b)), instituted these investigations effective April 8, 2016, following receipt of petitions filed with the Commission and Commerce by ArcelorMittal USA LLC (Chicago, Illinois), Nucor Corporation (Charlotte, North Carolina), and SSAB Enterprises, LLC (Lisle, Illinois). The Commission scheduled the final phase of the investigations following notification of preliminary determinations by Commerce that imports of carbon and alloy steel cut-tolength plate from Austria, Belgium, France, Germany, Italy, Japan, Korea, and Taiwan were being sold at LTFV within the meaning of section 733(b) of the Act (19 U.S.C. 1673b(b)). Notice of the scheduling of the final phase of the Commission’s investigations and of a public hearing to be held in connection therewith was given by posting copies of the notice in the Office of the Secretary, U.S. International Trade Commission, Washington, DC, and by publishing the notice in the Federal Register of October 12, 2016 (81 FR 70440). The hearing was held in Washington, DC, on November 30, 2016, and all persons who requested the opportunity were permitted to appear in person or by counsel. The Commission made these determinations pursuant to section 735(b) of the Act (19 U.S.C. 1673d(b)). It completed and filed its determinations in these investigations on May 18, 2017. The views of the Commission are contained in USITC Publication 4691 (May 2017), entitled Carbon and Alloy Cut-to-Length Plate from Austria, Belgium, France, Germany, Italy, Japan, Korea, and Taiwan: Investigation Nos. 701–TA–561 and 731–TA–1317–1318, 1321–1325, and 1327 (Final). Certain Robotic Vacuum Cleaning Devices and Components Thereof Such as Spare Parts; Institution of Investigation By order of the Commission. Issued: May 18, 2017. Lisa R. Barton, Secretary to the Commission. [FR Doc. 2017–10517 Filed 5–22–17; 8:45 am] BILLING CODE 7020–02–P 2 The Commission also finds that imports subject to Commerce’s affirmative critical circumstances determination are not likely to undermine seriously the remedial effect of the antidumping duty order on Austria, Belgium or Italy. PO 00000 Frm 00072 Fmt 4703 Sfmt 4703 U.S. International Trade Commission. ACTION: Notice. AGENCY: Notice is hereby given that a complaint was filed with the U.S. International Trade Commission on April 18, 2017, under section 337 of the Tariff Act of 1930, as amended, on behalf of iRobot Corporation of Bedford, Massachusetts. A supplement was filed on April 28, 2017. The complaint, as supplemented, alleges violations of section 337 based upon the importation into the United States, the sale for importation, and the sale within the United States after importation of certain vacuum cleaning devices and components thereof such as spare parts by reason of infringement of certain claims of U.S. Patent No. 6,809,490 (‘‘the ’490 patent’’); U.S. Patent No. 7,155,308 (‘‘the ’308 patent’’); U.S. Patent No. 8,474,090 (‘‘the ’090 patent’’); U.S. Patent No. 8,600,553 (‘‘the ’553 patent’’); U.S. Patent No. 9,038,233 (‘‘the ’233 patent’’); and U.S. Patent No. 9,486,924 (‘‘the ’924 patent’’). The complaint further alleges that an industry in the United States exists as required by the applicable Federal Statute. The complainant requests that the Commission institute an investigation and, after the investigation, issue a limited exclusion order and cease and desist orders. ADDRESSES: The complaint, except for any confidential information contained therein, is available for inspection during official business hours (8:45 a.m. to 5:15 p.m.) in the Office of the Secretary, U.S. International Trade Commission, 500 E Street SW., Room 112, Washington, DC 20436, telephone (202) 205–2000. Hearing impaired individuals are advised that information on this matter can be obtained by contacting the Commission’s TDD terminal on (202) 205–1810. Persons with mobility impairments who will need special assistance in gaining access to the Commission should contact the Office of the Secretary at (202) 205– 2000. General information concerning the Commission may also be obtained by accessing its internet server at https://www.usitc.gov. The public record for this investigation may be SUMMARY: E:\FR\FM\23MYN1.SGM 23MYN1

Agencies

[Federal Register Volume 82, Number 98 (Tuesday, May 23, 2017)]
[Notices]
[Page 23592]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2017-10517]


-----------------------------------------------------------------------

 INTERNATIONAL TRADE COMMISSION

[Investigation Nos. 701-TA-561 and 731-TA-1317-1318, 1321-1325, and 
1327 (Final)]


Carbon and Alloy Steel Cut-to-Length Plate From Austria, Belgium, 
France, Germany, Italy, Japan, Korea, and Taiwan

Determination

    On the basis of the record \1\ developed in the subject 
investigations, the United States International Trade Commission 
(``Commission'') determines, pursuant to the Tariff Act of 1930 (``the 
Act''), that an industry in the United States is materially injured by 
reason of imports of carbon and alloy steel cut-to-length plate from 
Austria, Belgium, France, Germany, Italy, Japan, Korea, and Taiwan, 
provided for in subheadings 7208.40.30, 7208.51.00, 7208.52.00, 
7211.13.00, 7211.14.00, 7225.40.11, 7225.40.30, 7226.20.00, and 
7226.91.50 of the Harmonized Tariff Schedule of the United States, that 
have been found by the Department of Commerce (``Commerce'') to be sold 
in the United States at less than fair value (``LTFV'') and imports of 
the subject merchandise subsidized by the government of Korea.\2\
---------------------------------------------------------------------------

    \1\ The record is defined in sec. 207.2(f) of the Commission's 
Rules of Practice and Procedure (19 CFR 207.2(f)).
    \2\ The Commission also finds that imports subject to Commerce's 
affirmative critical circumstances determination are not likely to 
undermine seriously the remedial effect of the antidumping duty 
order on Austria, Belgium or Italy.
---------------------------------------------------------------------------

Background

    The Commission, pursuant to section 735(b) of the Act (19 U.S.C. 
1673d(b)), instituted these investigations effective April 8, 2016, 
following receipt of petitions filed with the Commission and Commerce 
by ArcelorMittal USA LLC (Chicago, Illinois), Nucor Corporation 
(Charlotte, North Carolina), and SSAB Enterprises, LLC (Lisle, 
Illinois). The Commission scheduled the final phase of the 
investigations following notification of preliminary determinations by 
Commerce that imports of carbon and alloy steel cut-to-length plate 
from Austria, Belgium, France, Germany, Italy, Japan, Korea, and Taiwan 
were being sold at LTFV within the meaning of section 733(b) of the Act 
(19 U.S.C. 1673b(b)). Notice of the scheduling of the final phase of 
the Commission's investigations and of a public hearing to be held in 
connection therewith was given by posting copies of the notice in the 
Office of the Secretary, U.S. International Trade Commission, 
Washington, DC, and by publishing the notice in the Federal Register of 
October 12, 2016 (81 FR 70440). The hearing was held in Washington, DC, 
on November 30, 2016, and all persons who requested the opportunity 
were permitted to appear in person or by counsel.
    The Commission made these determinations pursuant to section 735(b) 
of the Act (19 U.S.C. 1673d(b)). It completed and filed its 
determinations in these investigations on May 18, 2017. The views of 
the Commission are contained in USITC Publication 4691 (May 2017), 
entitled Carbon and Alloy Cut-to-Length Plate from Austria, Belgium, 
France, Germany, Italy, Japan, Korea, and Taiwan: Investigation Nos. 
701-TA-561 and 731-TA-1317-1318, 1321-1325, and 1327 (Final).

    By order of the Commission.
     Issued: May 18, 2017.
Lisa R. Barton,
Secretary to the Commission.
[FR Doc. 2017-10517 Filed 5-22-17; 8:45 am]
 BILLING CODE 7020-02-P
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.