Accreditation and Approval of Camin Cargo Control, Inc., as a Commercial Gauger and Laboratory, 87946-87947 [2016-29156]
Download as PDF
<![CDATA[
87946
Federal Register / Vol. 81, No. 234 / Tuesday, December 6, 2016 / Notices
U.S. Customs and Border Protection
Accreditation and Approval of Chem
Gas International LLC as a Commercial
Gauger and Laboratory
U.S. Customs and Border
Protection, Department of Homeland
Security.
ACTION: Notice of accreditation and
approval of Chem Gas International LLC
as a commercial gauger and laboratory.
AGENCY:
Notice is hereby given,
pursuant to CBP regulations, that Chem
Gas International LLC has been
approved to gauge petroleum and
certain petroleum products and
accredited to test petroleum and certain
petroleum products for customs
purposes for the next three years as of
January 28, 2016.
SUMMARY:
CBPL No.
ASTM
27–48 .............
D4052
Dated: November 29, 2016.
Ira S. Reese,
Executive Director, Laboratories and
Scientific Services Directorate.
[FR Doc. 2016–29155 Filed 12–5–16; 8:45 am]
BILLING CODE 9111–14–P
mstockstill on DSK3G9T082PROD with NOTICES
API chapters
3 ...................
7 ...................
8 ...................
11 .................
12 .................
17 .................
Title
Tank gauging.
Temperature determination.
Sampling.
Physical Properties Data.
Calculations.
Maritime measurement.
Chem Gas International LLC is
accredited for the following laboratory
analysis procedures and methods for
petroleum and certain petroleum
products set forth by the U.S. Customs
and Border Protection Laboratory
Methods (CBPL) and American Society
for Testing and Materials (ASTM):
Standard Test Method for Density and Relative Density of Liquids by Digital Density Meter.
https://www.cbp.gov/about/labsscientific/commercial-gaugers-andlaboratories.
17:39 Dec 05, 2016
accordance with the provisions of 19
CFR 151.12 and 19 CFR 151.13. Chem
Gas International LLC is approved for
the following gauging procedures for
petroleum and certain petroleum
products from the American Petroleum
Institute (API):
Title
Anyone wishing to employ this entity
to conduct laboratory analyses and
gauger services should request and
receive written assurances from the
entity that it is accredited or approved
by the U.S. Customs and Border
Protection to conduct the specific test or
gauger service requested. Alternatively,
inquiries regarding the specific test or
gauger service this entity is accredited
or approved to perform may be directed
to the U.S. Customs and Border
Protection by calling (202) 344–1060.
The inquiry may also be sent to
CBPGaugersLabs@cbp.dhs.gov. Please
reference the Web site listed below for
a complete listing of CBP approved
gaugers and accredited laboratories.
VerDate Sep<11>2014
Effective Dates: The
accreditation and approval of Chem Gas
International LLC, as commercial gauger
and laboratory became effective on
January 28, 2016. The next triennial
inspection date will be scheduled for
January 2019.
FOR FURTHER INFORMATION CONTACT:
Approved Gauger and Accredited
Laboratories Manager, Laboratories and
Scientific Services Directorate, U.S.
Customs and Border Protection, 1300
Pennsylvania Avenue NW., Suite
1500N, Washington, DC 20229, tel. 202–
344–1060.
SUPPLEMENTARY INFORMATION: Notice is
hereby given pursuant to 19 CFR 151.12
and 19 CFR 151.13, that Chem Gas
International LLC, 3500 S. Richey St.,
Houston, TX 77017, has been approved
to gauge petroleum and certain
petroleum products and accredited to
test petroleum and certain petroleum
products for customs purposes, in
DATES:
DEPARTMENT OF HOMELAND
SECURITY
Jkt 241001
DEPARTMENT OF HOMELAND
SECURITY
U.S. Customs and Border Protection
Accreditation and Approval of Camin
Cargo Control, Inc., as a Commercial
Gauger and Laboratory
U.S. Customs and Border
Protection, Department of Homeland
Security.
ACTION: Notice of accreditation and
approval of Camin Cargo Control, Inc.,
as a commercial gauger and laboratory.
AGENCY:
Notice is hereby given,
pursuant to CBP regulations, that Camin
Cargo Control, Inc., has been approved
to gauge and accredited to test
petroleum and certain petroleum
products for customs purposes for the
next three years as of July 13, 2016.
DATES: Effective Dates: The
accreditation and approval of Camin
Cargo Control, Inc., as commercial
gauger and laboratory became effective
on July 13, 2016. The next triennial
inspection date will be scheduled for
July 2019.
FOR FURTHER INFORMATION CONTACT:
Approved Gauger and Accredited
Laboratories Manager, Laboratories and
Scientific Services Directorate, U.S.
Customs and Border Protection, 1300
Pennsylvania Avenue NW., Suite
SUMMARY:
PO 00000
Frm 00045
Fmt 4703
Sfmt 4703
1500N, Washington, DC 20229, tel. 202–
344–1060.
SUPPLEMENTARY INFORMATION: Notice is
hereby given pursuant to 19 CFR 151.12
and 19 CFR 151.13, that Camin Cargo
Control, Inc., 1800 Dabney Dr.,
Pasadena, TX 77502, has been approved
to gauge and accredited to test
petroleum and certain petroleum
products for customs purposes, in
accordance with the provisions of 19
CFR 151.12 and 19 CFR 151.13. Camin
Cargo Control, Inc., is approved for the
following gauging procedures for
petroleum and certain petroleum
products set forth by the American
Petroleum Institute (API):
API chapters
3 ...................
4 ...................
5 ...................
7 ...................
8 ...................
11 .................
12 .................
17 .................
Title
Tank gauging.
Proving Systems.
Metering.
Temperature Determination.
Sampling.
Physical Properties Data.
Calculations.
Maritime Measurements.
Camin Cargo Control, Inc., is
accredited for the following laboratory
analysis procedures and methods for
petroleum and certain petroleum
products set forth by the U.S. Customs
and Border Protection Laboratory
Methods (CBPL) and American Society
for Testing and Materials (ASTM):
E:\FR\FM\06DEN1.SGM
06DEN1
Federal Register / Vol. 81, No. 234 / Tuesday, December 6, 2016 / Notices
CBPL No.
ASTM
27–01
27–03
27–04
27–05
27–08
27–11
27–13
..............
..............
..............
..............
..............
..............
..............
D287
D4006
D95
D4928
D86
D445
D4294
27–14
27–48
27–50
27–57
..............
..............
..............
..............
D2622
D4052
D93
D7039
27–58 ..............
D5191
Title
Standard Test Method for API Gravity of crude Petroleum and Petroleum Products.
Standard Test Method for Water in Crude Oil by Distillation.
Standard Test Method for Water in Petroleum Products and Bituminous Materials by Distillation.
Standard Test Method for Water in Crude Oils by Coulometric Karl Fischer Titration.
Standard Test Method for Distillation of Petroleum Products.
Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids.
Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy-Dispersive X-ray Fluorescence Spectrometry.
Standard Test Method for Sulfur in Petroleum Products.
Standard Test Method for Density and Relative Density of Liquids by Digital Density Meter.
Standard Test Methods for Flash-Point by Pensky-Martens Closed Cup Tester.
Standard Test Method for Sulfur in Gasoline and Diesel Fuel by Monochromatic Wavelength Dispersive XRay Fluorescence Spectrometry.
Standard Test Method For Vapor Pressure of Petroleum Products.
Anyone wishing to employ this entity
to conduct laboratory analyses and
gauger services should request and
receive written assurances from the
entity that it is accredited or approved
by the U.S. Customs and Border
Protection to conduct the specific test or
gauger service requested. Alternatively,
inquiries regarding the specific test or
gauger service this entity is accredited
or approved to perform may be directed
to the U.S. Customs and Border
Protection by calling (202) 344–1060.
The inquiry may also be sent to
cbp.labhq@dhs.gov. Please reference the
Web site listed below for the current
CBP Approved Gaugers and Accredited
Laboratories List.
https://www.cbp.gov/about/labsscientific/commercial-gaugers-andlaboratories.
Dated: November 29, 2016.
Ira S. Reese,
Executive Director, Laboratories and
Scientific Services Directorate.
[FR Doc. 2016–29156 Filed 12–5–16; 8:45 am]
BILLING CODE 9111–14–P
DEPARTMENT OF HOMELAND
SECURITY
Transportation Security Administration
Intent To Request Approval From OMB
of One New Public Collection of
Information: Travel Request and
Expense Report Form for TSA
Contractors
Transportation Security
Administration, DHS.
ACTION: 60-day notice.
mstockstill on DSK3G9T082PROD with NOTICES
AGENCY:
The Transportation Security
Administration (TSA) invites public
comment on a new Information
Collection Request (ICR) abstracted
below that we will submit to the Office
of Management and Budget (OMB) for
approval in compliance with the
Paperwork Reduction Act (PRA). The
SUMMARY:
VerDate Sep<11>2014
17:39 Dec 05, 2016
87947
Jkt 241001
ICR describes the nature of the
information collection and its expected
burden. The collection involves the
submission of travel request and
reimbursement information by TSA
contractors to the Contracting Officer
Representative (COR) for their approval.
A TSA contractor will submit the form
prior to and upon return from travel.
DATES: Send your comments by
February 6, 2017.
ADDRESSES: Comments may be emailed
to TSAPRA@tsa.dhs.gov or delivered to
the TSA PRA Officer, Office of
Information Technology (OIT), TSA–11,
Transportation Security Administration,
601 South 12th Street, Arlington, VA
20598–6011.
FOR FURTHER INFORMATION CONTACT:
Contact Christina Walsh at the above
address, or by telephone (571) 227–
2062.
SUPPLEMENTARY INFORMATION:
Comments Invited
In accordance with the Paperwork
Reduction Act of 1995 (44 U.S.C. 3501
et seq.), an agency may not conduct or
sponsor, and a person is not required to
respond to, a collection of information
unless it displays a valid OMB control
number. The ICR documentation is
available at https://www.reginfo.gov.
Therefore, in preparation for OMB
review and approval of the following
information collection, TSA is soliciting
comments to—
(1) Evaluate whether the proposed
information requirement is necessary for
the proper performance of the functions
of the agency, including whether the
information will have practical utility;
(2) Evaluate the accuracy of the
agency’s estimate of the burden;
(3) Enhance the quality, utility, and
clarity of the information to be
collected; and
(4) Minimize the burden of the
collection of information on those who
are to respond, including using
appropriate automated, electronic,
PO 00000
Frm 00046
Fmt 4703
Sfmt 4703
mechanical, or other technological
collection techniques or other forms of
information technology.
Information Collection Requirement
Purpose of Data Collection
Pursuant to the Federal Travel
Regulation (FTR), TSA has authority to
implement statutory requirements and
policies for travel by Federal civilian
employees and others authorized to
travel at government expense. See FTR,
41 CFR 300. See also 5 U.S.C. 5707
(Travel, Transportation, and
Subsistence).1 Consistent with this
authority, TSA created the Contractor
Travel Request and Expense Report
form, TSA Form 308. The form allows
a TSA Contracting Officer
Representative to preauthorize
reimbursable travel for a contractor
intending to conduct travel determined
to be a reimbursable expense under the
contract. Requiring preauthorization for
travel ensures the requested travel is
within scope of the contract and any
costs incurred are in compliance with
the FTR. Additionally, the form may be
used post-travel to verify that the
invoiced-amount is consistent with the
preauthorized costs, which ensures
government dollars used to fund the
travel are not misused and that the
government does not overpay for any
reimbursable travel.
Description of Data Collection
The data collected on the Contractor
Travel Request and Expense Report
includes basic identifying information
for the individual traveling, such as full
name of the traveler, travel date(s) and
location(s), departure information,
1 Visit www.gsa.gov/federaltravelregulation for
text and other information regarding the FTR.
Under the FTR, a Federal traveler is a person who
travels on a Government aircraft and who is either:
(1) A civilian employee in the Government service;
(2) a member of the uniformed or foreign services
of the U.S. Government; or (3) a contractor working
under a contract with an executive agency. See 41
CFR 300–3.1.
E:\FR\FM\06DEN1.SGM
06DEN1
]]>Agencies
[Federal Register Volume 81, Number 234 (Tuesday, December 6, 2016)]
[Notices]
[Pages 87946-87947]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2016-29156]
-----------------------------------------------------------------------
DEPARTMENT OF HOMELAND SECURITY
U.S. Customs and Border Protection
Accreditation and Approval of Camin Cargo Control, Inc., as a
Commercial Gauger and Laboratory
AGENCY: U.S. Customs and Border Protection, Department of Homeland
Security.
ACTION: Notice of accreditation and approval of Camin Cargo Control,
Inc., as a commercial gauger and laboratory.
-----------------------------------------------------------------------
SUMMARY: Notice is hereby given, pursuant to CBP regulations, that
Camin Cargo Control, Inc., has been approved to gauge and accredited to
test petroleum and certain petroleum products for customs purposes for
the next three years as of July 13, 2016.
DATES: Effective Dates: The accreditation and approval of Camin Cargo
Control, Inc., as commercial gauger and laboratory became effective on
July 13, 2016. The next triennial inspection date will be scheduled for
July 2019.
FOR FURTHER INFORMATION CONTACT: Approved Gauger and Accredited
Laboratories Manager, Laboratories and Scientific Services Directorate,
U.S. Customs and Border Protection, 1300 Pennsylvania Avenue NW., Suite
1500N, Washington, DC 20229, tel. 202-344-1060.
SUPPLEMENTARY INFORMATION: Notice is hereby given pursuant to 19 CFR
151.12 and 19 CFR 151.13, that Camin Cargo Control, Inc., 1800 Dabney
Dr., Pasadena, TX 77502, has been approved to gauge and accredited to
test petroleum and certain petroleum products for customs purposes, in
accordance with the provisions of 19 CFR 151.12 and 19 CFR 151.13.
Camin Cargo Control, Inc., is approved for the following gauging
procedures for petroleum and certain petroleum products set forth by
the American Petroleum Institute (API):
------------------------------------------------------------------------
API chapters Title
------------------------------------------------------------------------
3................................ Tank gauging.
4................................ Proving Systems.
5................................ Metering.
7................................ Temperature Determination.
8................................ Sampling.
11............................... Physical Properties Data.
12............................... Calculations.
17............................... Maritime Measurements.
------------------------------------------------------------------------
Camin Cargo Control, Inc., is accredited for the following
laboratory analysis procedures and methods for petroleum and certain
petroleum products set forth by the U.S. Customs and Border Protection
Laboratory Methods (CBPL) and American Society for Testing and
Materials (ASTM):
[[Page 87947]]
------------------------------------------------------------------------
CBPL No. ASTM Title
------------------------------------------------------------------------
27-01.............. D287 Standard Test Method for API
Gravity of crude Petroleum
and Petroleum Products.
27-03.............. D4006 Standard Test Method for Water
in Crude Oil by Distillation.
27-04.............. D95 Standard Test Method for Water
in Petroleum Products and
Bituminous Materials by
Distillation.
27-05.............. D4928 Standard Test Method for Water
in Crude Oils by Coulometric
Karl Fischer Titration.
27-08.............. D86 Standard Test Method for
Distillation of Petroleum
Products.
27-11.............. D445 Standard Test Method for
Kinematic Viscosity of
Transparent and Opaque
Liquids.
27-13.............. D4294 Standard Test Method for
Sulfur in Petroleum and
Petroleum Products by Energy-
Dispersive X-ray Fluorescence
Spectrometry.
27-14.............. D2622 Standard Test Method for
Sulfur in Petroleum Products.
27-48.............. D4052 Standard Test Method for
Density and Relative Density
of Liquids by Digital Density
Meter.
27-50.............. D93 Standard Test Methods for
Flash-Point by Pensky-Martens
Closed Cup Tester.
27-57.............. D7039 Standard Test Method for
Sulfur in Gasoline and Diesel
Fuel by Monochromatic
Wavelength Dispersive X-Ray
Fluorescence Spectrometry.
27-58.............. D5191 Standard Test Method For Vapor
Pressure of Petroleum
Products.
------------------------------------------------------------------------
Anyone wishing to employ this entity to conduct laboratory analyses
and gauger services should request and receive written assurances from
the entity that it is accredited or approved by the U.S. Customs and
Border Protection to conduct the specific test or gauger service
requested. Alternatively, inquiries regarding the specific test or
gauger service this entity is accredited or approved to perform may be
directed to the U.S. Customs and Border Protection by calling (202)
344-1060. The inquiry may also be sent to cbp.labhq@dhs.gov. Please
reference the Web site listed below for the current CBP Approved
Gaugers and Accredited Laboratories List.
https://www.cbp.gov/about/labs-scientific/commercial-gaugers-and-laboratories.
Dated: November 29, 2016.
Ira S. Reese,
Executive Director, Laboratories and Scientific Services Directorate.
[FR Doc. 2016-29156 Filed 12-5-16; 8:45 am]
BILLING CODE 9111-14-P
