Proposed Extension of Information Collection; Safety Standards for Underground Coal Mine Ventilation-Belt Entry Used as an Intake Air Course To Ventilate Working Sections and Areas Where Mechanized Mining Equipment Is Being Installed or Removed, 42735-42736 [2016-15424]

Download as PDF Federal Register / Vol. 81, No. 126 / Thursday, June 30, 2016 / Notices included in the request for Office of Management and Budget approval of the information collection request; they will also become a matter of public record. Sheila McConnell, Certifying Officer. [FR Doc. 2016–15426 Filed 6–29–16; 8:45 am] BILLING CODE 4510–43–P DEPARTMENT OF LABOR Mine Safety and Health Administration [OMB Control No. 1219–0138] Proposed Extension of Information Collection; Safety Standards for Underground Coal Mine Ventilation— Belt Entry Used as an Intake Air Course To Ventilate Working Sections and Areas Where Mechanized Mining Equipment Is Being Installed or Removed Mine Safety and Health Administration, Labor. ACTION: Request for public comments. AGENCY: The Department of Labor, as part of its continuing effort to reduce paperwork and respondent burden, conducts a pre-clearance consultation program to provide the general public and Federal agencies with an opportunity to comment on proposed collections of information in accordance with the Paperwork Reduction Act of 1995, 44 U.S.C. 3506(c)(2)(A). This program helps to assure that requested data can be provided in the desired format, reporting burden (time and financial resources) is minimized, collection instruments are clearly understood, and the impact of collection requirements on respondents can be properly assessed. Currently, the Mine Safety and Health Administration (MSHA) is soliciting comments on the information collection for Safety Standards for Underground Coal Mine Ventilation—Belt Entry Used as an Intake Air Course to Ventilate Working Sections and Areas Where Mechanized Mining Equipment is Being Installed or Removed. DATES: All comments must be received on or before August 29, 2016. ADDRESSES: Comments concerning the information collection requirements of this notice may be sent by any of the methods listed below. • Federal E-Rulemaking Portal: https://www.regulations.gov. Follow the on-line instructions for submitting comments for docket number [MSHA– 20##–0###] • Regular Mail: Send comments to USDOL–MSHA, Office of Standards, mstockstill on DSK3G9T082PROD with NOTICES SUMMARY: VerDate Sep<11>2014 20:01 Jun 29, 2016 Jkt 238001 Regulations, and Variances, 201 12th Street South, Suite 4E401, Arlington, VA 22202–5452. • Hand Delivery: USDOL–Mine Safety and Health Administration, 201 12th Street South, Suite 4E401, Arlington, VA 22202–5452. Sign in at the receptionist’s desk on the 4th floor via the East elevator. FOR FURTHER INFORMATION CONTACT: Sheila McConnell, Director, Office of Standards, Regulations, and Variances, MSHA, at MSHA.information .collections@dol.gov (email); 202–693– 9440 (voice); or 202–693–9441 (facsimile). SUPPLEMENTARY INFORMATION: I. Background MSHA allows operators to use air from a belt air course to ventilate a working section, or an area where mechanized mining equipment is being installed or removed, only under certain conditions. The belt air use must be evaluated and approved by the district manager in the mine ventilation plan and operators must follow a number of other requirements that provide additional protection. Section 75.350(b) requires that the mine operator must include in a ventilation plan a justification that the use of air from a belt entry would afford at least the same measure of protection as where belt haulage entries are not used. The plan also must include information regarding point feeds and regulators and designated areas for dust and air velocity measurements. Section 75.351(b)(3) and 75.351(b)(4) require a mine operator to post a map or schematic, at a designated surface location, which shows the locations and type of Atmospheric Monitoring System (AMS) sensors at each location and the intended air flow direction at these locations. This map or schematic must be updated within 24 hours of any change in this information. Contact information for AMS and other appropriate personnel also must be posted at this location. Section 75.351(j) requires approval of the CO ambient levels, and the means to determine those levels, in the mine ventilation plan. Section 75.351(m) permits a mine to incorporate time delays into the AMS, or to use other methods for reducing non-fire alerts and alarm levels, provided they are specified and approved in the mine ventilation plan. Permission for such time delays, or other methods of reducing non-fire alerts and alarms, would be granted based on associated documentation that justifies these changes. PO 00000 Frm 00107 Fmt 4703 Sfmt 4703 42735 Sections 75.351(n)(2) and 75.351(n)(3) require that alarms for AMS be tested every seven days and CO, smoke, or methane sensors be calibrated, every 31 days, respectively. Section 75.351(o)(1)(i) requires that a record be made if the AMS emits an alert or alarm signal. The record would consist of the date, time, location, and type of sensor, and the reason for its activation. Section 75.351(o)(1)(ii) requires that, if an AMS malfunctions, a record be made of the date, the extent and cause of the malfunction, and the corrective action taken to return the system to proper operating condition. Section 75.351(o)(1)(iii) requires that the persons doing the weekly test of alert and alarm signals, the monthly calibration, or maintenance of the system make a record of these tests, calibrations, or maintenance. Section 75.351(o)(3) requires that all records concerning the AMS be kept in a book or electronically in a computer system that is secure and not susceptible to alteration. Section 75.351(p) requires the mine operator to keep these records for at least one year at a surface location and to make them available for inspection by authorized representatives of the Secretary and representatives of miners. Section 75.351(q)(3) requires that a record of annual AMS operator training be kept. The record will include the content of training, the person conducting the training, and the date the training is conducted. The record needs to be maintained at the mine site by the mine operator for at least one year. Sections 75.352(a), 75.352(b) and 75.352(c) require the designated AMS operator or other appropriate personnel to notify, investigate, or evacuate when malfunction, alert, or alarm signals are received. Section 75.371(hh) requires reporting within the mine ventilation plan of the ‘‘ambient level in parts per million of carbon monoxide, and the method for determining the ambient level, in all areas where carbon monoxide sensors are installed.’’ This provision is impacted by section 75.351(j). Section 75.371(kk) requires the locations where air quantities are measured as set forth in section 75.350(b)(6) be included in the mine ventilation plan. Section 75.371(ll) requires the locations and use of point feed regulators, in accordance with Sections 75.350(c) and 75.350(d)(5), to be in the mine ventilation plan. Section 75.371(mm) requires the location of any diesel-discriminating E:\FR\FM\30JNN1.SGM 30JNN1 42736 Federal Register / Vol. 81, No. 126 / Thursday, June 30, 2016 / Notices mstockstill on DSK3G9T082PROD with NOTICES sensor and additional carbon monoxide or smoke sensors installed in the belt air course to be included in the mine ventilation plan. Sections 75.371(nn), 75.371(oo), and 75.371(pp) require modification of the mine ventilation plan to show the length of the time delay or any other method used for reducing the number of non-fire related alert and alarm signals from CO sensors, the lower alert and alarm setting for CO sensors, and the alternate instrument and the alert and alarm levels associated with the instrument, respectively. II. Desired Focus of Comments MSHA is soliciting comments concerning the proposed information collection related to Safety Standards for Underground Coal Mine Ventilation—Belt Entry Used as an Intake Air Course to Ventilate Working Sections and Areas Where Mechanized Mining Equipment is Being Installed or Removed. MSHA is particularly interested in comments that: • Evaluate whether the collection of information is necessary for the proper performance of the functions of the agency, including whether the information has practical utility; • Evaluate the accuracy of MSHA’s estimate of the burden of the collection of information, including the validity of the methodology and assumptions used; • Suggest methods to enhance the quality, utility, and clarity of the information to be collected; and • Minimize the burden of the collection of information on those who are to respond, including through the use of appropriate automated, electronic, mechanical, or other technological collection techniques or other forms of information technology, e.g., permitting electronic submission of responses. The information collection request will be available on https:// www.regulations.gov. MSHA cautions the commenter against providing any information in the submission that should not be publicly disclosed. Full comments, including personal information provided, will be made available on www.regulations.gov and www.reginfo.gov. The public may also examine publicly available documents at USDOL—Mine Safety and Health Administration, 201 12th South, Suite 4E401, Arlington, VA 22202–5452. Sign in at the receptionist’s desk on the 4th floor via the East elevator. Questions about the information collection requirements may be directed to the person listed in the FOR FURTHER INFORMATION section of this notice. VerDate Sep<11>2014 20:01 Jun 29, 2016 Jkt 238001 III. Current Actions This request for collection of information contains provisions for Safety Standards for Underground Coal Mine Ventilation—Belt Entry Used as an Intake Air Course to Ventilate Working Sections and Areas Where Mechanized Mining Equipment is Being Installed or Removed. MSHA has updated the data with respect to the number of respondents, responses, burden hours, and burden costs supporting this information collection request. Type of Review: Extension, without change, of a currently approved collection. Agency: Mine Safety and Health Administration. OMB Number: 1219–0138. Affected Public: Business or other forprofit. Number of Respondents: 17. Frequency: On occasion. Number of Responses: 205. Annual Burden Hours: 3,442 hours. Annual Respondent or Recordkeeper Cost: $54,740. Comments submitted in response to this notice will be summarized and included in the request for Office of Management and Budget approval of the information collection request; they will also become a matter of public record. Sheila McConnell, Certifying Officer. [FR Doc. 2016–15424 Filed 6–29–16; 8:45 am] BILLING CODE 4510–43–P DEPARTMENT OF LABOR Mine Safety and Health Administration Affirmative Decisions on Petitions for Modification Granted in Whole or in Part Mine Safety and Health Administration (MSHA), Labor. ACTION: Notice. AGENCY: Section 101(c) of the Federal Mine Safety and Health Act of 1977 and 30 CFR part 44 govern the application, processing, and disposition of petitions for modification. This Federal Register Notice notifies the public that MSHA has investigated and issued a final decision on certain mine operator petitions to modify a safety standard. ADDRESSES: Copies of the final decisions are posted on MSHA’s Web site at https://www.msha.gov/READROOM/ PETITION.HTM. The public may inspect the petitions and final decisions during normal business hours in MSHA’s Office of Standards, Regulations, and Variances, 201 12th SUMMARY: PO 00000 Frm 00108 Fmt 4703 Sfmt 4703 Street South, Suite 4E401, Arlington, Virginia 22202. All visitors are required to check in at the receptionist’s desk in Suite 4E401. FOR FURTHER INFORMATION CONTACT: Barbara Barron at 202–693–9447 (Voice), barron.barbara@dol.gov (Email), or 202–693–9441 (Telefax). [These are not toll-free numbers]. SUPPLEMENTARY INFORMATION: I. Introduction Under section 101 of the Federal Mine Safety and Health Act of 1977, a mine operator may petition and the Secretary of Labor (Secretary) may modify the application of a mandatory safety standard to that mine if the Secretary determines that: (1) An alternative method exists that will guarantee no less protection for the miners affected than that provided by the standard; or (2) the application of the standard will result in a diminution of safety to the affected miners. MSHA bases the final decision on the petitioner’s statements, any comments and information submitted by interested persons, and a field investigation of the conditions at the mine. In some instances, MSHA may approve a petition for modification on the condition that the mine operator complies with other requirements noted in the decision. II. Granted Petitions for Modification On the basis of the findings of MSHA’s investigation, and as designee of the Secretary, MSHA has granted or partially granted the following petitions for modification: • Docket Number: M–2013–055–C. FR Notice: 79 FR 4177 (1/24/2014). Petitioner: Signal Peak Energy, LLC, 100 Portal Drive, Roundup, Montana 59072. Mine: Bull Mountains Mine No. 1, MSHA I.D. No. 24–01950, located in Musselshell County, Montana. Regulation Affected: 30 CFR 75.1002(a) (Installation of electric equipment and conductors; permissibility). • Docket Number: M–2013–060–C. FR Notice: 79 FR 11141 (2/27/2014). Petitioner: Kimmel’s Mining, Inc., P.O. Box 8, Williamstown, Pennsylvania 17098. Mine: Williamstown Mine #1, MSHA I.D. No. 36–09435, located in Schuylkill County, Pennsylvania. Regulation Affected: 30 CFR 75.1400 (Hoisting equipment; general). • Docket Number: M–2014–030–C. FR Notice: 79 FR 64627 (10/30/2014). Petitioner: M-Class Mining, LLC, 11351 N. Thompsonville Road, Macedonia, Illinois 62860. E:\FR\FM\30JNN1.SGM 30JNN1

Agencies

[Federal Register Volume 81, Number 126 (Thursday, June 30, 2016)]
[Notices]
[Pages 42735-42736]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2016-15424]


-----------------------------------------------------------------------

DEPARTMENT OF LABOR

Mine Safety and Health Administration

[OMB Control No. 1219-0138]


Proposed Extension of Information Collection; Safety Standards 
for Underground Coal Mine Ventilation--Belt Entry Used as an Intake Air 
Course To Ventilate Working Sections and Areas Where Mechanized Mining 
Equipment Is Being Installed or Removed

AGENCY: Mine Safety and Health Administration, Labor.

ACTION: Request for public comments.

-----------------------------------------------------------------------

SUMMARY: The Department of Labor, as part of its continuing effort to 
reduce paperwork and respondent burden, conducts a pre-clearance 
consultation program to provide the general public and Federal agencies 
with an opportunity to comment on proposed collections of information 
in accordance with the Paperwork Reduction Act of 1995, 44 U.S.C. 
3506(c)(2)(A). This program helps to assure that requested data can be 
provided in the desired format, reporting burden (time and financial 
resources) is minimized, collection instruments are clearly understood, 
and the impact of collection requirements on respondents can be 
properly assessed. Currently, the Mine Safety and Health Administration 
(MSHA) is soliciting comments on the information collection for Safety 
Standards for Underground Coal Mine Ventilation--Belt Entry Used as an 
Intake Air Course to Ventilate Working Sections and Areas Where 
Mechanized Mining Equipment is Being Installed or Removed.

DATES: All comments must be received on or before August 29, 2016.

ADDRESSES: Comments concerning the information collection requirements 
of this notice may be sent by any of the methods listed below.
     Federal E-Rulemaking Portal: https://www.regulations.gov. 
Follow the on-line instructions for submitting comments for docket 
number [MSHA-20##-0###]
     Regular Mail: Send comments to USDOL-MSHA, Office of 
Standards, Regulations, and Variances, 201 12th Street South, Suite 
4E401, Arlington, VA 22202-5452.
     Hand Delivery: USDOL-Mine Safety and Health 
Administration, 201 12th Street South, Suite 4E401, Arlington, VA 
22202-5452. Sign in at the receptionist's desk on the 4th floor via the 
East elevator.

FOR FURTHER INFORMATION CONTACT: Sheila McConnell, Director, Office of 
Standards, Regulations, and Variances, MSHA, at MSHA.information 
.collections@dol.gov (email); 202-693-9440 (voice); or 202-693-9441 
(facsimile).

SUPPLEMENTARY INFORMATION: 

I. Background

    MSHA allows operators to use air from a belt air course to 
ventilate a working section, or an area where mechanized mining 
equipment is being installed or removed, only under certain conditions. 
The belt air use must be evaluated and approved by the district manager 
in the mine ventilation plan and operators must follow a number of 
other requirements that provide additional protection.
    Section 75.350(b) requires that the mine operator must include in a 
ventilation plan a justification that the use of air from a belt entry 
would afford at least the same measure of protection as where belt 
haulage entries are not used. The plan also must include information 
regarding point feeds and regulators and designated areas for dust and 
air velocity measurements.
    Section 75.351(b)(3) and 75.351(b)(4) require a mine operator to 
post a map or schematic, at a designated surface location, which shows 
the locations and type of Atmospheric Monitoring System (AMS) sensors 
at each location and the intended air flow direction at these 
locations. This map or schematic must be updated within 24 hours of any 
change in this information. Contact information for AMS and other 
appropriate personnel also must be posted at this location.
    Section 75.351(j) requires approval of the CO ambient levels, and 
the means to determine those levels, in the mine ventilation plan.
    Section 75.351(m) permits a mine to incorporate time delays into 
the AMS, or to use other methods for reducing non-fire alerts and alarm 
levels, provided they are specified and approved in the mine 
ventilation plan. Permission for such time delays, or other methods of 
reducing non-fire alerts and alarms, would be granted based on 
associated documentation that justifies these changes.
    Sections 75.351(n)(2) and 75.351(n)(3) require that alarms for AMS 
be tested every seven days and CO, smoke, or methane sensors be 
calibrated, every 31 days, respectively.
    Section 75.351(o)(1)(i) requires that a record be made if the AMS 
emits an alert or alarm signal. The record would consist of the date, 
time, location, and type of sensor, and the reason for its activation.
    Section 75.351(o)(1)(ii) requires that, if an AMS malfunctions, a 
record be made of the date, the extent and cause of the malfunction, 
and the corrective action taken to return the system to proper 
operating condition.
    Section 75.351(o)(1)(iii) requires that the persons doing the 
weekly test of alert and alarm signals, the monthly calibration, or 
maintenance of the system make a record of these tests, calibrations, 
or maintenance.
    Section 75.351(o)(3) requires that all records concerning the AMS 
be kept in a book or electronically in a computer system that is secure 
and not susceptible to alteration.
    Section 75.351(p) requires the mine operator to keep these records 
for at least one year at a surface location and to make them available 
for inspection by authorized representatives of the Secretary and 
representatives of miners.
    Section 75.351(q)(3) requires that a record of annual AMS operator 
training be kept. The record will include the content of training, the 
person conducting the training, and the date the training is conducted. 
The record needs to be maintained at the mine site by the mine operator 
for at least one year.
    Sections 75.352(a), 75.352(b) and 75.352(c) require the designated 
AMS operator or other appropriate personnel to notify, investigate, or 
evacuate when malfunction, alert, or alarm signals are received.
    Section 75.371(hh) requires reporting within the mine ventilation 
plan of the ``ambient level in parts per million of carbon monoxide, 
and the method for determining the ambient level, in all areas where 
carbon monoxide sensors are installed.'' This provision is impacted by 
section 75.351(j).
    Section 75.371(kk) requires the locations where air quantities are 
measured as set forth in section 75.350(b)(6) be included in the mine 
ventilation plan.
    Section 75.371(ll) requires the locations and use of point feed 
regulators, in accordance with Sections 75.350(c) and 75.350(d)(5), to 
be in the mine ventilation plan.
    Section 75.371(mm) requires the location of any diesel-
discriminating

[[Page 42736]]

sensor and additional carbon monoxide or smoke sensors installed in the 
belt air course to be included in the mine ventilation plan.
    Sections 75.371(nn), 75.371(oo), and 75.371(pp) require 
modification of the mine ventilation plan to show the length of the 
time delay or any other method used for reducing the number of non-fire 
related alert and alarm signals from CO sensors, the lower alert and 
alarm setting for CO sensors, and the alternate instrument and the 
alert and alarm levels associated with the instrument, respectively.

II. Desired Focus of Comments

    MSHA is soliciting comments concerning the proposed information 
collection related to Safety Standards for Underground Coal Mine 
Ventilation--Belt Entry Used as an Intake Air Course to Ventilate 
Working Sections and Areas Where Mechanized Mining Equipment is Being 
Installed or Removed. MSHA is particularly interested in comments that:
     Evaluate whether the collection of information is 
necessary for the proper performance of the functions of the agency, 
including whether the information has practical utility;
     Evaluate the accuracy of MSHA's estimate of the burden of 
the collection of information, including the validity of the 
methodology and assumptions used;
     Suggest methods to enhance the quality, utility, and 
clarity of the information to be collected; and
     Minimize the burden of the collection of information on 
those who are to respond, including through the use of appropriate 
automated, electronic, mechanical, or other technological collection 
techniques or other forms of information technology, e.g., permitting 
electronic submission of responses.
    The information collection request will be available on https://www.regulations.gov. MSHA cautions the commenter against providing any 
information in the submission that should not be publicly disclosed. 
Full comments, including personal information provided, will be made 
available on www.regulations.gov and www.reginfo.gov.
    The public may also examine publicly available documents at USDOL--
Mine Safety and Health Administration, 201 12th South, Suite 4E401, 
Arlington, VA 22202-5452. Sign in at the receptionist's desk on the 4th 
floor via the East elevator.
    Questions about the information collection requirements may be 
directed to the person listed in the FOR FURTHER INFORMATION section of 
this notice.

III. Current Actions

    This request for collection of information contains provisions for 
Safety Standards for Underground Coal Mine Ventilation--Belt Entry Used 
as an Intake Air Course to Ventilate Working Sections and Areas Where 
Mechanized Mining Equipment is Being Installed or Removed. MSHA has 
updated the data with respect to the number of respondents, responses, 
burden hours, and burden costs supporting this information collection 
request.
    Type of Review: Extension, without change, of a currently approved 
collection.
    Agency: Mine Safety and Health Administration.
    OMB Number: 1219-0138.
    Affected Public: Business or other for-profit.
    Number of Respondents: 17.
    Frequency: On occasion.
    Number of Responses: 205.
    Annual Burden Hours: 3,442 hours.
    Annual Respondent or Recordkeeper Cost: $54,740.
    Comments submitted in response to this notice will be summarized 
and included in the request for Office of Management and Budget 
approval of the information collection request; they will also become a 
matter of public record.

Sheila McConnell,
Certifying Officer.
[FR Doc. 2016-15424 Filed 6-29-16; 8:45 am]
 BILLING CODE 4510-43-P
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.