Certain New Chemicals; Receipt and Status Information for March 2016, 26224-26229 [2016-10229]
Download as PDF
<![CDATA[
srobinson on DSK5SPTVN1PROD with NOTICES
26224
Federal Register / Vol. 81, No. 84 / Monday, May 2, 2016 / Notices
order to form an adequate factual basis
for a complete analysis of the
application on its merit, the resource
agency, Indian Tribe, or person must file
a request for a study with the
Commission not later than 60 days from
the date of filing of the application, and
serve a copy of the request on the
applicant.
l. Deadline for filing additional study
requests and requests for cooperating
agency status: June 17, 2016.
The Commission strongly encourages
electronic filing. Please file additional
study requests and requests for
cooperating agency status using the
Commission’s eFiling system at https://
www.ferc.gov/docs-filing/efiling.asp. For
assistance, please contact FERC Online
Support at FERCOnlineSupport@
ferc.gov, (866) 208–3676 (toll free), or
(202) 502–8659 (TTY). In lieu of
electronic filing, please send a paper
copy to: Secretary, Federal Energy
Regulatory Commission, 888 First Street
NE., Washington, DC 20426. The first
page of any filing should include docket
number P–13212–005.
m. The application is not ready for
environmental analysis at this time.
n. The proposed Grant Lake
Hydroelectric Project would consists of:
(1) An intake structure within Grant
Lake; (2) a 3,300-foot-long water
conveyance; (3) a 72-inch-diameter, 150feet-long, welded steel penstock; (4) a
power house containing two 2.5
megawatt Francis turbine/generator
units; (5) a 95-foot-long open channel
tailrace; (6) a 3.6-acre tailrace detention
pond; (6) a 1.1-mile-long, 115-kilovolt
transmission line; and (7) appurtenant
facilities. The project is estimated to
generate an average of 18,600 megawatt
hours (MWh) annually.
o. A copy of the application is
available for review at the Commission
in the Public Reference Room or may be
viewed on the Commission’s Web site at
https://www.ferc.gov using the
‘‘eLibrary’’ link. Enter the docket
number excluding the last three digits in
the docket number field to access the
document. For assistance, contact FERC
Online Support. A copy is also available
for inspection and reproduction at the
address in item h above.
You may also register online at
https://www.ferc.gov/docs-filing/
esubscription.asp to be notified via
email of new filings and issuances
related to this or other pending projects.
For assistance, contact FERC Online
Support.
q. Procedural schedule: The
application will be processed according
to the following preliminary Hydro
Licensing Schedule. Revisions to the
schedule will be made as appropriate.
VerDate Sep<11>2014
22:33 Apr 29, 2016
Jkt 238001
Issue Notice of Acceptance or
Deficiency Letter *—June 2016
Request Additional Information (if
needed) *—June 2016
Issue Scoping Document 1 for
comments—July 2016
Scoping Meeting (if needed)—August
2016
Comments on Scoping Document 1—
September 2016
Issue Scoping Document 2—November
2016
Issue notice of ready for environmental
analysis—November 2016
Request Additional Information (if
needed) *—November 2016
Comments, recommendations, terms
and conditions, and prescriptions—
January 2017
Reply Comments—March 2017
Notice of the availability of the draft
NEPA document—June 2017
Comments on the draft NEPA
document—July 2017
Initiate 10(j) process—July 2017
Notice of the availability of the final
NEPA document—November 2017
* A deficiency letter and/or the need
for additional information would result
in subsequent delays to the processing
schedule.
Dated: April 25, 2016.
Kimberly D. Bose,
Secretary.
[FR Doc. 2016–10098 Filed 4–29–16; 8:45 am]
BILLING CODE 6717–01–P
DEPARTMENT OF ENERGY
Federal Energy Regulatory
Commission
[Docket No. ER16–1468–000]
Palmco Power RI LLC; Supplemental
Notice That Initial Market-Based Rate
Filing Includes Request for Blanket
Section 204 Authorization
This is a supplemental notice in the
above-referenced proceeding of Palmco
Power RI LLC‘s application for marketbased rate authority, with an
accompanying rate tariff, noting that
such application includes a request for
blanket authorization, under 18 CFR
part 34, of future issuances of securities
and assumptions of liability.
Any person desiring to intervene or to
protest should file with the Federal
Energy Regulatory Commission, 888
First Street NE., Washington, DC 20426,
in accordance with Rules 211 and 214
of the Commission’s Rules of Practice
and Procedure (18 CFR 385.211 and
385.214). Anyone filing a motion to
intervene or protest must serve a copy
of that document on the Applicant.
PO 00000
Frm 00027
Fmt 4703
Sfmt 4703
Notice is hereby given that the
deadline for filing protests with regard
to the applicant’s request for blanket
authorization, under 18 CFR part 34, of
future issuances of securities and
assumptions of liability, is May 11,
2016.
The Commission encourages
electronic submission of protests and
interventions in lieu of paper, using the
FERC Online links at https://
www.ferc.gov. To facilitate electronic
service, persons with Internet access
who will eFile a document and/or be
listed as a contact for an intervenor
must create and validate an
eRegistration account using the
eRegistration link. Select the eFiling
link to log on and submit the
intervention or protests.
Persons unable to file electronically
should submit an original and 5 copies
of the intervention or protest to the
Federal Energy Regulatory Commission,
888 First Street NE., Washington, DC
20426.
The filings in the above-referenced
proceeding are accessible in the
Commission’s eLibrary system by
clicking on the appropriate link in the
above list. They are also available for
electronic review in the Commission’s
Public Reference Room in Washington,
DC. There is an eSubscription link on
the Web site that enables subscribers to
receive email notification when a
document is added to a subscribed
docket(s). For assistance with any FERC
Online service, please email
FERCOnlineSupport@ferc.gov. or call
(866) 208–3676 (toll free). For TTY, call
(202) 502–8659.
Dated: April 21, 2016.
Kimberly D. Bose,
Secretary.
[FR Doc. 2016–10140 Filed 4–29–16; 8:45 am]
BILLING CODE 6717–01–P
ENVIRONMENTAL PROTECTION
AGENCY
[EPA–HQ–OPPT–2016–0022; FRL–9945–54]
Certain New Chemicals; Receipt and
Status Information for March 2016
Environmental Protection
Agency (EPA).
ACTION: Notice.
AGENCY:
EPA is required under the
Toxic Substances Control Act (TSCA) to
publish in the Federal Register a notice
of receipt of a premanufacture notice
(PMN); an application for a test
marketing exemption (TME), both
pending and/or expired; and a periodic
status report on any new chemicals
SUMMARY:
E:\FR\FM\02MYN1.SGM
02MYN1
26225
Federal Register / Vol. 81, No. 84 / Monday, May 2, 2016 / Notices
under EPA review and the receipt of
notices of commencement (NOC) to
manufacture those chemicals. This
document covers the period from March
1, 2016 to March 31, 2016.
DATES: Comments identified by the
specific case number provided in this
document, must be received on or
before June 1, 2016.
ADDRESSES: Submit your comments,
identified by docket identification (ID)
number EPA–HQ–OPPT–2016–0022,
and the specific PMN number or TME
number for the chemical related to your
comment, by one of the following
methods:
• Federal eRulemaking Portal: https://
www.regulations.gov. Follow the online
instructions for submitting comments.
Do not submit electronically any
information you consider to be
Confidential Business Information (CBI)
or other information whose disclosure is
restricted by statute.
• Mail: Document Control Office
(7407M), Office of Pollution Prevention
and Toxics (OPPT), Environmental
Protection Agency, 1200 Pennsylvania
Ave. NW., Washington, DC 20460–0001.
• Hand Delivery: To make special
arrangements for hand delivery or
delivery of boxed information, please
follow the instructions at https://
www.epa.gov/dockets/contacts.html.
Additional instructions on
commenting or visiting the docket,
along with more information about
dockets generally, is available at
https://www.epa.gov/dockets.
FOR FURTHER INFORMATION CONTACT:
For technical information contact: Jim
Rahai, IMD 7407M, Office of Pollution
Prevention and Toxics, Environmental
Protection Agency, 1200 Pennsylvania
Ave. NW., Washington, DC 20460–0001;
telephone number: (202) 564–8593;
email address: rahai.jim@epa.gov.
For general information contact: The
TSCA-Hotline, ABVI-Goodwill, 422
South Clinton Ave., Rochester, NY
14620; telephone number: (202) 554–
1404; email address: TSCA-Hotline@
epa.gov.
SUPPLEMENTARY INFORMATION:
I. General Information
A. Does this action apply to me?
This action is directed to the public
in general. As such, the Agency has not
attempted to describe the specific
entities that this action may apply to.
Although others may be affected, this
action applies directly to the submitters
of the actions addressed in this
document.
B. What should I consider as I prepare
my comments for EPA?
1. Submitting CBI. Do not submit this
information to EPA through
regulations.gov or email. Clearly mark
the part or all of the information that
you claim to be CBI. For CBI
information in a disk or CD–ROM that
you mail to EPA, mark the outside of the
disk or CD–ROM as CBI and then
identify electronically within the disk or
CD–ROM the specific information that
is claimed as CBI. In addition to one
complete version of the comment that
includes information claimed as CBI, a
copy of the comment that does not
contain the information claimed as CBI
must be submitted for inclusion in the
public docket. Information so marked
will not be disclosed except in
accordance with procedures set forth in
40 CFR part 2.
2. Tips for preparing your comments.
When preparing and submitting your
comments, see the commenting tips at
https://www.epa.gov/dockets/
comments.html.
II. What action is the Agency taking?
This document provides receipt and
status reports, which cover the period
from March 1, 2016 to March 31, 2016,
and consists of the PMNs both pending
and/or expired, and the NOCs to
manufacture a new chemical that the
Agency has received under TSCA
section 5 during this time period.
III. What is the Agency’s authority for
taking this action?
Under TSCA, 15 U.S.C. 2601 et seq.,
EPA classifies a chemical substance as
either an ‘‘existing’’ chemical or a
‘‘new’’ chemical. Any chemical
substance that is not on EPA’s TSCA
Inventory is classified as a ‘‘new
chemical,’’ while those that are on the
TSCA Inventory are classified as an
‘‘existing chemical.’’ For more
information about the TSCA Inventory
go to: https://www.epa.gov/opptintr/
newchems/pubs/inventory.htm.
Anyone who plans to manufacture or
import a new chemical substance for a
non-exempt commercial purpose is
required by TSCA section 5 to provide
EPA with a PMN, before initiating the
activity. Section 5(h)(1) of TSCA
authorizes EPA to allow persons, upon
application, to manufacture (includes
import) or process a new chemical
substance, or a chemical substance
subject to a significant new use rule
(SNUR) issued under TSCA section 5(a),
for ‘‘test marketing’’ purposes, which is
referred to as a test marketing
exemption, or TME. For more
information about the requirements
applicable to a new chemical go to:
https://www.epa.gov/oppt/newchems.
Under TSCA sections 5(d)(2) and
5(d)(3), EPA is required to publish in
the Federal Register a notice of receipt
of a PMN or an application for a TME
and to publish in the Federal Register
periodic reports on the status of new
chemicals under review and the receipt
of NOCs to manufacture those
chemicals.
IV. Receipt and Status Reports
As used in each of the tables in this
unit, (S) indicates that the information
in the table is the specific information
provided by the submitter, and (G)
indicates that the information in the
table is generic information because the
specific information provided by the
submitter was claimed as CBI.
For the 58 PMNs received by EPA
during this period, Table 1 provides the
following information (to the extent that
such information is not claimed as CBI):
The EPA case number assigned to the
PMN; The date the PMN was received
by EPA; the projected end date for
EPA’s review of the PMN; the
submitting manufacturer/importer; the
potential uses identified by the
manufacturer/importer in the PMN; and
the chemical identity.
TABLE 1—PMNS RECEIVED FROM MARCH 1, 2016 TO MARCH 31, 2016
Received date
Projected
notice end date
P–16–0086 ........
3/24/2016
6/22/2016
CBI ...........................
P–16–0130 ........
3/18/2016
6/16/2016
CBI ...........................
P–16–0130 ........
3/18/2016
6/16/2016
CBI ...........................
srobinson on DSK5SPTVN1PROD with NOTICES
Case No.
VerDate Sep<11>2014
20:30 Apr 29, 2016
Jkt 238001
PO 00000
Manufacturer
importer
Frm 00028
Fmt 4703
Use
(G) Coating component.
(G) Polymeric dye
carrier.
(G) Intermediate for
a polymeric dye
carrier.
Sfmt 4703
Chemical
(G) Mixed metal oxide-halide complex.
(G) Amide ester polymer.
(G) Amide ester polymer.
E:\FR\FM\02MYN1.SGM
02MYN1
26226
Federal Register / Vol. 81, No. 84 / Monday, May 2, 2016 / Notices
TABLE 1—PMNS RECEIVED FROM MARCH 1, 2016 TO MARCH 31, 2016—Continued
Received date
Projected
notice end date
Manufacturer
importer
Use
Chemical
P–16–0137 ........
3/16/2016
6/14/2016
H.B.Fuller Company
3/16/2016
6/14/2016
H.B.Fuller Company
P–16–0186 ........
3/16/2016
6/14/2016
CBI ...........................
(G) Industrial adhesive.
(G) Industrial adhesive.
(G) Surfactant ..........
P–16–0193 ........
P–16–0204 ........
3/10/2016
3/4/2016
6/8/2016
6/2/2016
CBI ...........................
Gaco Western .........
(S) Dicarboxylic acid polymers with alkane
diols and desmodur e23.
(S) Dicarboxylic acid polymers with alkane
diols and e23.
(G) Sodium branched chain alkyl hydroxyl
and branched chain alkenyl sulfonates.
(G) Branched alkenes.
(G) Per acetoacetylated sucrose.
P–16–0138 ........
P–16–0218 ........
3/4/2016
6/2/2016
Gaco Western .........
P–16–0218 ........
3/4/2016
6/2/2016
Gaco Western .........
P–16–0219 ........
3/4/2016
6/2/2016
Gaco Western .........
P–16–0219 ........
3/4/2016
6/2/2016
Gaco Western .........
P–16–0231 ........
3/11/2016
6/9/2016
CBI ...........................
P–16–0232 ........
3/2/2016
5/31/2016
CBI ...........................
P–16–0234 ........
3/2/2016
5/31/2016
CBI ...........................
P–16–0237 ........
3/1/2016
5/30/2016
CBI ...........................
P–16–0238 ........
3/2/2016
5/31/2016
H.B. Fuller Company
(G) Industrial adhesive.
P–16–0239 ........
3/2/2016
5/31/2016
H.B. Fuller Company
(G) Industrial adhesive.
P–16–0240 ........
3/3/2016
6/1/2016
CBI ...........................
(G) Resin for industrial coatings.
P–16–0241 ........
3/4/2016
6/2/2016
CBI ...........................
P–16–0241 ........
3/4/2016
6/2/2016
CBI ...........................
P–16–0241 ........
3/4/2016
6/2/2016
CBI ...........................
P–16–0242 ........
3/3/2016
6/1/2016
International Flavors
And Fragrances
Inc..
P–16–0243 ........
3/3/2016
6/1/2016
CBI ...........................
(G) Component of
coatings.
(G) Component in
ink formulations.
(G) Component in
adhesive formulations.
(S) The notified substance will be
used as a fragrance ingredient,
being blended
(mixed) with other
fragrance ingredients to make fragrance oils that
will be sold to industrial and commercial customers
for their incorporation into soaps detergents cleaners
air fresheners candles and other
similar industrial,
household and
consumer products.
(S) Binder for paint
and coatings.
srobinson on DSK5SPTVN1PROD with NOTICES
Case No.
VerDate Sep<11>2014
20:30 Apr 29, 2016
Jkt 238001
PO 00000
Frm 00029
Fmt 4703
(S) Intermediate .......
(G) Reactant spray
foam insulation.
(G) Reactant spray
foam insulation.
(G) Reactant architectural coating.
(G) Reactant architectural coating.
(G) Reactant spray
foam insulation.
(G) Functional polymer used in industrial/commercial
sealants adhesives
and coatings.
(G) Lubricant additive.
(G) Site contained
intermediate.
(G) Friction modifier
Sfmt 4703
(G) Acetoacetylated glycerin.
(G) Acetoacetylated glycerin.
(G) Per acetoacetylated sorbitol.
(G) Per acetoacetylated sorbitol.
(G) Polysiloxane with functional groups.
(G) Zinc, bis[2-(hydroxyl-ko)benzoate-ko]˜ ˜ ˜ ˜ ˜ ˜ ˜ ˜ ˆ
,(t-4)-, ar, ara¿a¿a¿a¿a¿a¿a¿a¿a¢
˜ ˜ ˜ ˜ ˜ ˜ ˜ ˜ ˜ ˜ ˜ ˜ ˜ ˜
a¿a¿a¿a¿a¿a¿a¿a¿a¿a¿a¿a¿a¿a
˜ ˜
¿a¿a¿-bis(alkyl) derivs.
(G) Benzoic acid, alkylol-, branched and
linear, monosodium salts.
(S) 2-propenoic acid, dodecyl ester, polymer with 2-hydroxyethyl 2-propenoate.
(G) Soybean oil, ester with tetra functional
alcohol,
polymer
with
1,1’methylenebis[4-isocyanatobenzene] and
glycol ether.
(G) Soybean oil, ester with tetra functional
alcohol, polymer with 1,1’-methylenebis
[isocyanatobenzene] and glycol ether.
(G)
Styrene(ated)
copolymer
with
alkylmethacrylate, hydroxyalkylacrylate
and acrylic acid.
(G) Polyester.
(G) Polyester.
(G) Polyester.
(S)
Cyclopentanol,
methylbutyl)-.
1-ethyl-2-(3-
(S) Propanedioic acid, 1,3-diethyl ester,
polymer
with
2,2-dimethyl-1,3propanediol
and
hexahydro-1,3isobenzofurandione.
E:\FR\FM\02MYN1.SGM
02MYN1
26227
Federal Register / Vol. 81, No. 84 / Monday, May 2, 2016 / Notices
TABLE 1—PMNS RECEIVED FROM MARCH 1, 2016 TO MARCH 31, 2016—Continued
Received date
Projected
notice end date
P–16–0246 ........
3/4/2016
6/2/2016
CBI ...........................
(G) Chemical intermediate.
P–16–0247 ........
3/18/2016
6/16/2016
CBI ...........................
(G) As a stabilizer ....
P–16–0248 ........
3/8/2016
6/6/2016
CBI ...........................
P–16–0249 ........
3/10/2016
6/8/2016
CBI ...........................
P–16–0250 ........
3/8/2016
6/6/2016
Allnex Usa Inc. ........
(S) resin used for fiberglass reinforced
plastic (frp) applications.
(G) Surface treatment substance.
(S) Resin for improving mechanical
properties in automotive paints.
P–16–0251 ........
3/11/2016
6/9/2016
CBI ...........................
P–16–0252 ........
3/11/2016
6/9/2016
CBI ...........................
P–16–0253 ........
3/10/2016
6/8/2016
CBI ...........................
P–16–0254 ........
3/10/2016
6/8/2016
CBI ...........................
P–16–0260 ........
3/16/2016
6/14/2016
CBI ...........................
P–16–0261 ........
3/11/2016
6/9/2016
CBI ...........................
P–16–0262 ........
3/25/2016
6/23/2016
CBI ...........................
(G) Bio-based base
oil.
P–16–0263 ........
3/11/2016
6/9/2016
CBI ...........................
(G) Fuel additive ......
P–16–0264 ........
3/24/2016
6/22/2016
CBI ...........................
P–16–0265 ........
P–16–0266 ........
P–16–0267 ........
3/24/2016
3/17/2016
3/16/2016
6/22/2016
6/15/2016
6/14/2016
CBI ...........................
CBI ...........................
Allnex Usa Inc. ........
(G) Reclaimed silicones.
(G) Lubricant ...........
(G) Adhesives ..........
(S) Electro-deposition primer.
P–16–0268 ........
3/16/2016
6/14/2016
Colonial Chemical,
Inc..
(G) Personal care
use.
P–16–0269 ........
3/16/2016
6/14/2016
Weylchem US Inc. ...
P–16–0270 ........
3/18/2016
6/16/2016
CBI ...........................
P–16–0271 ........
3/18/2016
6/16/2016
Oxea Corporation ....
P–16–0272 ........
3/18/2016
6/16/2016
CBI ...........................
(S) Reactant in the
reaction.
(G) Rheology modifier.
(S) Flexible pvc plasticizer for wire insulation.
(G) Ingredient in a
(S) Lecithins, soya, hydrogenated.
formulated product.
srobinson on DSK5SPTVN1PROD with NOTICES
Case No.
VerDate Sep<11>2014
20:30 Apr 29, 2016
Jkt 238001
PO 00000
Manufacturer
importer
Frm 00030
Fmt 4703
Use
(G) Pulp bleaching
catalyst.
(G) A reactive additive in polymeric
formulations. This
functional polymer
may be used in industrial/commercial sealants, adhesives and coatings upon end-use
it would be fully incorporated and
bound into the
cured polymers
and resins.
(G) Fatty acid based
glyceride blend.
(G) Oil & gas extraction.
(G) Gas generant in
automotive air bag
inflators.
(S) Intermediate .......
Sfmt 4703
Chemical
(S) 2-pyridinecarboxylic acid, 6-(4-chloro2-fluoro-3-methoxyphenyl)-4,5-difluoro-,
phenylmethyl ester.
(S) 2-propenoic acid, 2-methyl-, polymer
with hexadecyl 2-methyl-2-propenoate
and octadecyl 2-methyl-2-propenoate.
(G) Methacrylate blocked polyurethane.
(G) Hydrazine derivatives.
(G) Substituted carbomonocycle, polymer
with substituted alkanediol, alkanedioic
acid, alkanediol, substituted alkanoic
acid and substituted carbomonocycle,
compd. with substituted alkane.
(G) Organic manganese catalyst.
(G) Polysiloxane with functional groups.
(G) Partial esters of fatty acids with glycerol.
(G) Polymer of substituted acrylic acid
and bromohexane.
(G) Melamine nitrate.
(S) Propanoic acid, 3-(dimethylamino)-2methyl-, methyl ester.
(S)
9-octadecenoic
acid
(9z)-,
homopolymer, reaction products with
lauric acid, 2-ethylhexyl esters, hydrogenated.
(G) Alkene polymer with anhydride and
imides.
(G) Reclaimed fluorinated phenylmethyl
siloxane volatiles.
(G) Fluorinated phenylmethyl siloxane.
(G) Polyester polyurethane polyol.
(G) Fatty acids, polymers with substituted
carbomonocycle,
substituted
alkylamines, heteromonocycle, substituted alkanoate, and alkyleneamine,
lactates (salts).
(S) Fatty acids, C18-unsaturated, dimers,
hydrogenated, polymers with N-[3(dimethylamino)propyl] coco amides,
N1, N1-dimethyl -1,3-dipropanediamine
and epichlorohydrin.
(S)
Benzene,2-isothiocyanato-1,3-bis(1methylethyl)-5-phenoxy-.
(G) Derivative of substituted acrylamides
copolymer.
(S) 1,2,4-benzenetricarboxylic acid, 1,2,4trinonyl ester.
E:\FR\FM\02MYN1.SGM
02MYN1
26228
Federal Register / Vol. 81, No. 84 / Monday, May 2, 2016 / Notices
TABLE 1—PMNS RECEIVED FROM MARCH 1, 2016 TO MARCH 31, 2016—Continued
Received date
Projected
notice end date
P–16–0273 ........
3/21/2016
6/19/2016
CBI ...........................
P–16–0274 ........
3/21/2016
6/19/2016
CBI ...........................
P–16–0275 ........
P–16–0276 ........
P–16–0278 ........
3/21/2016
3/21/2016
3/24/2016
6/19/2016
6/19/2016
6/22/2016
CBI ...........................
CBI ...........................
CBI ...........................
P–16–0280 ........
3/25/2016
6/23/2016
CBI ...........................
P–16–0281 ........
3/30/2016
6/28/2016
CBI ...........................
P–16–0282 ........
P–16–0283 ........
3/28/2016
3/29/2016
6/26/2016
6/27/2016
CBI ...........................
Allnex Usa Inc. ........
P–16–0284 ........
3/29/2016
6/27/2016
Deepak Nitrite Corporation Inc..
P–16–0285 ........
P–16–0286 ........
3/31/2016
3/31/2016
6/29/2016
6/29/2016
CBI ...........................
CBI ...........................
Case No.
For the 39 NOCs received by EPA
during this period, Table 3 provides the
following information (to the extent that
such information is not claimed as CBI):
Manufacturer
importer
Use
Chemical
(G) Ingredient in
(G) Alkyl heteromonocycle, polymer with
metal working
heteromonocycle, carboxyalkyl alkyl
fluids.
ether.
(G) Ingredient In
(G) Alkyl heteromonocycle, polymer with
metal working fluid.
heteromonocycle, carboxyalkyl alkyl
ether.
(G) Surfactant .......... (G) Rhamnolipid salt.
(G) Surfactant .......... (G) Rhamnolipids.
(G) Polymeric Film
(G) 2-(chloromethyl)oxirane and 4,4′Former For Coatmethylenebis[alkylphenol] polymer with
ings.
diphenol, reaction products with 2-propenoic acid, 2-methyl-, ethenylbenzene,
ethyl
2-propenoate
and
2(dimethylamino)ethanol.
(G) Co-initiator ......... (G) Polyether polyol with aromatic
dialkylamine.
(G) Reactive polyol .. (G) Fatty alcohols—dimers, trimmers,
polymers.
(S) Paint dryier ........ (G) Manganese complexes.
(S) Resin for auto(G) Alkanedioic acid, polymer with submotive coatings.
stituted carbomonocycle, substituted alkane, substituted alkanoic acid and substituted alkyldiamine, compd. with substituted alkanol.
(S) Optical bright(G) Anilino substituted bis-triazinyl derivaener for textiles
tive
of
4,4′-diaminostilbenepaper and paper2,2′disulfonic acid.
board.
(G) Intermediate ...... (G) Ester amine.
(G) Wellbore additive (G) Quaternary ammonium salts.
The EPA case number assigned to the
NOC; the date the NOC was received by
EPA; the projected date of
commencement provided by the
submitter in the NOC; and the chemical
identity.
TABLE 2—NOCS RECEIVED FROM MARCH 1, 2016 TO MARCH 31, 2016
Case No.
Received date
Commencement date
3/4/2016
3/31/2016
3/2/2016
11/18/2004
3/22/2016
2/23/2016
P–13–0622 .......
P–13–0879 .......
P–14–0035 .......
3/31/2016
3/24/2016
3/22/2016
3/27/2016
3/22/2016
3/17/2016
P–14–0079
P–14–0334
P–15–0028
P–15–0373
.......
.......
.......
.......
3/28/2016
3/1/2016
3/30/2016
3/14/2016
6/25/2014
2/21/2016
3/29/2016
3/12/2016
P–15–0438 .......
P–15–0550 .......
3/8/2016
3/22/2016
3/2/2016
3/4/2016
P–15–0551 .......
srobinson on DSK5SPTVN1PROD with NOTICES
P–00–1105 .......
P–06–0205 .......
P–09–0044 .......
3/22/2016
3/4/2016
P–15–0568 .......
3/15/2016
3/9/2016
P–15–0574 .......
3/3/2016
2/19/2016
3/3/2016
3/18/2016
3/29/2016
3/23/2016
2/25/2016
2/23/2016
2/29/2016
3/11/2016
P–15–0583
P–15–0601
P–15–0646
P–15–0651
.......
.......
.......
.......
VerDate Sep<11>2014
20:30 Apr 29, 2016
Jkt 238001
PO 00000
Chemical
(G) Hydroxy functional amino ester.
(S) Butanenitrile, 4-(dimethoxymethylsilyl)-2-methyl-.
(S)
Ruthenium,
[1,3-bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene]dichloro[[2-(1methylethoxy-ko)phenyl]methylene-kc]-, (sp-5–41).
(S) 1-propanamine,3-(diethoxymethylsilyl)-N, N-dimethyl-.
(G) Alkylphenol.
(S) Butanedioic acid, 2-methylene-, polymer with 2-propenoic acid and sodium 2-methyl-2[(1-oxo-2-propen-1-yl)amino]-1-propanesulfonate (1:1), sodium salt.
(G) Synthetic polyol esters.
(S) 2-propenoic acid, 2-methyl-, heptadecyl ester, branched.
(S) Silicon oxycarbide, carbon silicon oxide.
(G) Substituted carbopolycycle, polymer with disubstituted alkane substituted alkyl methacrylate-blocked.
(G) Zinc carboxylate.
(G) Tetrahydroalkyl aromatic heterocyclic diketone, polymer with dialkyleneglycol,
trialkyleneglycol, heterocyclic diketone and aromatic heterocyclic diketone.
(G) Aromatic heterocyclic diketone, polymer with dialkyleneglycol, trialkyleneglycol and
alkenoic acid glycidyl ester.
(G) Alicyclic polycarboxylic acid, polymer with alkyl methacrylate, alkyldiol, alkyldioic acid,
polyalkyleneoxide, alkoxy methacrylate, aromatic heterocyclic diketone, aromatic
diisocyanate, heterocyclic ketone and dialkyleneglycol.
`
(G) 1,3-isobenzofurandione, 5,5a-[2,2,2-trifluoro-1-(trifluoromethyl) ethylidene]bis-, polymer
with aromatic amines.
(G) Butanedioic acid, 2-[[(alkyl)amino]methyl]-, 1,4-bis(alkyl) ester.
(G) Polymer of humic acid salt, acrylamide and substituted sulfonic acid.
(S) Silane, (3-chloropropyl)diethoxymethyl-.
(G) Siloxanes and silicones, di methyl, polyether modified.
Frm 00031
Fmt 4703
Sfmt 4703
E:\FR\FM\02MYN1.SGM
02MYN1
Federal Register / Vol. 81, No. 84 / Monday, May 2, 2016 / Notices
26229
TABLE 2—NOCS RECEIVED FROM MARCH 1, 2016 TO MARCH 31, 2016—Continued
Case No.
Received date
Commencement date
P–15–0735 .......
3/16/2016
2/26/2016
P–15–0736 .......
3/31/2016
3/30/2016
P–15–0740 .......
3/14/2016
3/11/2016
P–15–0752
P–15–0765
P–16–0014
P–16–0020
P–16–0037
.......
.......
.......
.......
.......
3/23/2016
3/3/2016
3/23/2016
3/9/2016
3/16/2016
3/3/2016
2/9/2016
3/8/2016
3/8/2016
2/26/2016
P–16–0041
P–16–0052
P–16–0053
P–16–0073
P–16–0077
P–16–0087
P–16–0105
P–16–0111
.......
.......
.......
.......
.......
.......
.......
.......
3/4/2016
3/31/2016
3/28/2016
3/4/2016
3/22/2016
3/30/2016
3/7/2016
3/9/2016
2/22/2016
3/3/2016
3/21/2016
2/11/2016
3/20/2016
3/27/2016
2/25/2016
3/4/2016
P–16–0112 .......
3/9/2016
3/4/2016
P–16–0118 .......
3/30/2016
3/21/2016
P–92–0038 .......
P–99–0100 .......
3/16/2016
3/23/2016
2/25/2016
3/21/2016
Authority: 15 U.S.C. 2601 et seq.
[FR Doc. 2016–10229 Filed 4–29–16; 8:45 am]
BILLING CODE 6560–50–P
FEDERAL COMMUNICATIONS
COMMISSION
[CG Docket No. 16–16; DA 16–187]
Termination of Dormant Proceedings
Federal Communications
Commission.
ACTION: Notice.
AGENCY:
In this document, the
Commission seeks comment on whether
certain docketed Commission
proceedings should be terminated as
dormant. The Commission’s procedural
rules, which were revised to streamline
and improve the agency’s docket
management practices, delegate
authority to the Chief, CGB to
periodically review all open dockets
and, in consultation with the
responsible Bureaus or Offices, to
identify those dockets that appear to be
candidates for termination.
srobinson on DSK5SPTVN1PROD with NOTICES
VerDate Sep<11>2014
20:30 Apr 29, 2016
Jkt 238001
(S) Hydrocarbons, C5-rich, polymers with (6e)-7,11-dimethyl-3-methylene-1,6,10dodecatriene, 2-methylbutene and methylstyrene.
(G) Castor oil, polymer with substituted alkanoic acid, substituted carbomonocycle, dialkyl
substituted alkanediol and tdi, substituted alkanone-blocked.
(G) Disubstituted alkanedioic acid, polymer with substituted carbomonocycle, dialkyl carbonate, alkanediol and (alkylimino) bis [alkanol], acetate (salt).
(G) Polysiloxane, di-me, epoxyfunctional.
(S) 1,3-propanediol, 2-(dimethylamino)-2-(hydroxymethyl)-.
(G) Silicon, tris[dialkyl phenyl]-dialkyl-dioxoalkane-naphthalene disulfonate.
(G) Polyethyleneglycol modified polyacrylate, compd. with alcohol amine.
(S) Hydrocarbons, C5-rich, polymers with (6e)-7,11-dimethyl-3-methylene-1,6,10dodecatriene, 2-methylbutene and methylstyrene, manuf. of, by-products from, C20–40
fraction.
(G) Alkohol alkoxylate.
(G) Dialkylol amine, polymer with succinic anhydride and aromatic carboxylic acid.
(G) Acrylated polycarbonate polyol.
(G) Styrene-acrylate polymer.
(S) 5-octenoic acid, methyl ester, (5z)-.
(G) Dicaroxylic acid, polymer with aminoalkanoic acid and polyether polyol.
(G) Alkyl polyol salt.
(G) Fatty acids, reaction products with alkylamine, polymers with substituted
carbomonocycle, substituted alkylamines, heteromonocycle and substituted alkanoate,
acetates (salts).
(G) Substituted heteromonocycle, polymer with substituted carbomonocycle and alkyl
(hydroxyalkyl)alkanediol, alkoxyalkanol-blocked.
(S) 2-propenoic acid, 2-methyl-, 2-dodecylhexadecyl ester, polymer with methyl 2-methyl-2propenoate and 2-tetradecyloctadecyl 2-methyl-2-propenoate.
(S) Polytitanocarbosilane.
(G) Polyether amino acrylate.
Comments are due on or before
June 1, 2016, and reply comments are
due on or before June 16, 2016.
ADDRESSES: Interested parties may
submit comments, identified by [CG
Docket No. 16–16], by any of the
following methods:
D Electronic Filers: Comments may be
filed electronically using the Internet by
accessing the Commission’s Electronic
Comment Filing System (ECFS) at
https://fjallfoss.fcc.gov/ecfs2/. Filers
should follow the instructions provided
on the Web site for submitting
comments. In completing the transmittal
screen, ECFS filers should include their
full name, U.S. Postal Service mailing
address, and the applicable docket or
rulemaking number, which in this
instance is CG Docket No. 16–16.
D Paper Filers: Parties who choose to
file by paper must file an original and
one copy of each filing. Filings can be
sent by hand or messenger delivery, by
commercial overnight courier, or by
first-class or overnight U.S. Postal
Service mail. All filings must be
addressed to the Commission’s
Secretary, Office of the Secretary,
Federal Communications Commission.
D All hand-delivered or messengerdelivered paper filings for the
Commission’s Secretary must be
delivered to FCC Headquarters at 445
12th Street SW., Room TW–A325,
DATES:
Dated: April 26, 2016.
Pamela S. Myrick,
Director, Information Management Division,
Office of Pollution Prevention and Toxics.
SUMMARY:
Chemical
PO 00000
Frm 00032
Fmt 4703
Sfmt 4703
Washington, DC 20554. The filing hours
are 8 a.m. to 7 p.m. All hand deliveries
must be held together with rubber bands
or fasteners. Any envelopes and boxes
must be disposed of before entering the
building.
D Commercial overnight mail (other
than U.S. Postal Service Express mail
and Priority mail) must be sent to 9300
East Hampton Drive, Capitol Heights,
MD 20743. U.S. Postal Service first
class, Express, and Priority mail must be
addressed to 445 12th Street SW.,
Washington DC 20554.
FOR FURTHER INFORMATION CONTACT:
Lauren Wilson, Consumer and
Governmental Affairs Bureau at (202)
418–1607 or by email at lauren.wilson@
fcc.gov.
SUPPLEMENTARY INFORMATION: This is a
synopsis of the Commission’s Public
Notice, Consumer and Governmental
Affairs Bureau Seeks Comment on
Termination of Certain Proceedings as
Dormant, document DA 16–187,
released on February 22, 2016 in CG
Docket No. 16–16. The full text of
document DA 16–187 and copies of any
subsequently filed documents in this
matter will be available for public
inspection and copying via ECFS, and
during regular business hours at the
FCC Reference Information Center,
Portals II, 445 12th Street, SW., Room
CY–A257, Washington, DC 20554.
E:\FR\FM\02MYN1.SGM
02MYN1
]]>Agencies
[Federal Register Volume 81, Number 84 (Monday, May 2, 2016)]
[Notices]
[Pages 26224-26229]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2016-10229]
=======================================================================
-----------------------------------------------------------------------
ENVIRONMENTAL PROTECTION AGENCY
[EPA-HQ-OPPT-2016-0022; FRL-9945-54]
Certain New Chemicals; Receipt and Status Information for March
2016
AGENCY: Environmental Protection Agency (EPA).
ACTION: Notice.
-----------------------------------------------------------------------
SUMMARY: EPA is required under the Toxic Substances Control Act (TSCA)
to publish in the Federal Register a notice of receipt of a
premanufacture notice (PMN); an application for a test marketing
exemption (TME), both pending and/or expired; and a periodic status
report on any new chemicals
[[Page 26225]]
under EPA review and the receipt of notices of commencement (NOC) to
manufacture those chemicals. This document covers the period from March
1, 2016 to March 31, 2016.
DATES: Comments identified by the specific case number provided in this
document, must be received on or before June 1, 2016.
ADDRESSES: Submit your comments, identified by docket identification
(ID) number EPA-HQ-OPPT-2016-0022, and the specific PMN number or TME
number for the chemical related to your comment, by one of the
following methods:
Federal eRulemaking Portal: https://www.regulations.gov.
Follow the online instructions for submitting comments. Do not submit
electronically any information you consider to be Confidential Business
Information (CBI) or other information whose disclosure is restricted
by statute.
Mail: Document Control Office (7407M), Office of Pollution
Prevention and Toxics (OPPT), Environmental Protection Agency, 1200
Pennsylvania Ave. NW., Washington, DC 20460-0001.
Hand Delivery: To make special arrangements for hand
delivery or delivery of boxed information, please follow the
instructions at https://www.epa.gov/dockets/contacts.html.
Additional instructions on commenting or visiting the docket, along
with more information about dockets generally, is available at https://www.epa.gov/dockets.
FOR FURTHER INFORMATION CONTACT:
For technical information contact: Jim Rahai, IMD 7407M, Office of
Pollution Prevention and Toxics, Environmental Protection Agency, 1200
Pennsylvania Ave. NW., Washington, DC 20460-0001; telephone number:
(202) 564-8593; email address: rahai.jim@epa.gov.
For general information contact: The TSCA-Hotline, ABVI-Goodwill,
422 South Clinton Ave., Rochester, NY 14620; telephone number: (202)
554-1404; email address: TSCA-Hotline@epa.gov.
SUPPLEMENTARY INFORMATION:
I. General Information
A. Does this action apply to me?
This action is directed to the public in general. As such, the
Agency has not attempted to describe the specific entities that this
action may apply to. Although others may be affected, this action
applies directly to the submitters of the actions addressed in this
document.
B. What should I consider as I prepare my comments for EPA?
1. Submitting CBI. Do not submit this information to EPA through
regulations.gov or email. Clearly mark the part or all of the
information that you claim to be CBI. For CBI information in a disk or
CD-ROM that you mail to EPA, mark the outside of the disk or CD-ROM as
CBI and then identify electronically within the disk or CD-ROM the
specific information that is claimed as CBI. In addition to one
complete version of the comment that includes information claimed as
CBI, a copy of the comment that does not contain the information
claimed as CBI must be submitted for inclusion in the public docket.
Information so marked will not be disclosed except in accordance with
procedures set forth in 40 CFR part 2.
2. Tips for preparing your comments. When preparing and submitting
your comments, see the commenting tips at https://www.epa.gov/dockets/comments.html.
II. What action is the Agency taking?
This document provides receipt and status reports, which cover the
period from March 1, 2016 to March 31, 2016, and consists of the PMNs
both pending and/or expired, and the NOCs to manufacture a new chemical
that the Agency has received under TSCA section 5 during this time
period.
III. What is the Agency's authority for taking this action?
Under TSCA, 15 U.S.C. 2601 et seq., EPA classifies a chemical
substance as either an ``existing'' chemical or a ``new'' chemical. Any
chemical substance that is not on EPA's TSCA Inventory is classified as
a ``new chemical,'' while those that are on the TSCA Inventory are
classified as an ``existing chemical.'' For more information about the
TSCA Inventory go to: https://www.epa.gov/opptintr/newchems/pubs/inventory.htm.
Anyone who plans to manufacture or import a new chemical substance
for a non-exempt commercial purpose is required by TSCA section 5 to
provide EPA with a PMN, before initiating the activity. Section 5(h)(1)
of TSCA authorizes EPA to allow persons, upon application, to
manufacture (includes import) or process a new chemical substance, or a
chemical substance subject to a significant new use rule (SNUR) issued
under TSCA section 5(a), for ``test marketing'' purposes, which is
referred to as a test marketing exemption, or TME. For more information
about the requirements applicable to a new chemical go to: https://www.epa.gov/oppt/newchems.
Under TSCA sections 5(d)(2) and 5(d)(3), EPA is required to publish
in the Federal Register a notice of receipt of a PMN or an application
for a TME and to publish in the Federal Register periodic reports on
the status of new chemicals under review and the receipt of NOCs to
manufacture those chemicals.
IV. Receipt and Status Reports
As used in each of the tables in this unit, (S) indicates that the
information in the table is the specific information provided by the
submitter, and (G) indicates that the information in the table is
generic information because the specific information provided by the
submitter was claimed as CBI.
For the 58 PMNs received by EPA during this period, Table 1
provides the following information (to the extent that such information
is not claimed as CBI): The EPA case number assigned to the PMN; The
date the PMN was received by EPA; the projected end date for EPA's
review of the PMN; the submitting manufacturer/importer; the potential
uses identified by the manufacturer/importer in the PMN; and the
chemical identity.
Table 1--PMNs Received From March 1, 2016 to March 31, 2016
----------------------------------------------------------------------------------------------------------------
Projected Manufacturer
Case No. Received date notice end date importer Use Chemical
----------------------------------------------------------------------------------------------------------------
P-16-0086............ 3/24/2016 6/22/2016 CBI............. (G) Coating (G) Mixed metal
component. oxide-halide
complex.
P-16-0130............ 3/18/2016 6/16/2016 CBI............. (G) Polymeric (G) Amide ester
dye carrier. polymer.
P-16-0130............ 3/18/2016 6/16/2016 CBI............. (G) Intermediate (G) Amide ester
for a polymeric polymer.
dye carrier.
[[Page 26226]]
P-16-0137............ 3/16/2016 6/14/2016 H.B.Fuller (G) Industrial (S) Dicarboxylic
Company. adhesive. acid polymers with
alkane diols and
desmodur e23.
P-16-0138............ 3/16/2016 6/14/2016 H.B.Fuller (G) Industrial (S) Dicarboxylic
Company. adhesive. acid polymers with
alkane diols and
e23.
P-16-0186............ 3/16/2016 6/14/2016 CBI............. (G) Surfactant.. (G) Sodium branched
chain alkyl
hydroxyl and
branched chain
alkenyl sulfonates.
P-16-0193............ 3/10/2016 6/8/2016 CBI............. (S) Intermediate (G) Branched
alkenes.
P-16-0204............ 3/4/2016 6/2/2016 Gaco Western.... (G) Reactant (G) Per
spray foam acetoacetylated
insulation. sucrose.
P-16-0218............ 3/4/2016 6/2/2016 Gaco Western.... (G) Reactant (G) Acetoacetylated
spray foam glycerin.
insulation.
P-16-0218............ 3/4/2016 6/2/2016 Gaco Western.... (G) Reactant (G) Acetoacetylated
architectural glycerin.
coating.
P-16-0219............ 3/4/2016 6/2/2016 Gaco Western.... (G) Reactant (G) Per
architectural acetoacetylated
coating. sorbitol.
P-16-0219............ 3/4/2016 6/2/2016 Gaco Western.... (G) Reactant (G) Per
spray foam acetoacetylated
insulation. sorbitol.
P-16-0231............ 3/11/2016 6/9/2016 CBI............. (G) Functional (G) Polysiloxane
polymer used in with functional
industrial/ groups.
commercial
sealants
adhesives and
coatings.
P-16-0232............ 3/2/2016 5/31/2016 CBI............. (G) Lubricant (G) Zinc, bis[2-
additive. (hydroxyl-
ko)benzoate-ko]-,(t-
4)-, ar,
ar[atilde][iquest][
atilde][iquest][ati
lde][iquest][atilde
][iquest][atilde][i
quest][atilde][ique
st][atilde][iquest]
[atilde][iquest][ac
irc][cent][atilde][
iquest][atilde][iqu
est][atilde][iquest
][atilde][iquest][a
tilde][iquest][atil
de][iquest][atilde]
[iquest][atilde][iq
uest][atilde][iques
t][atilde][iquest][
atilde][iquest][ati
lde][iquest][atilde
][iquest][atilde][i
quest][atilde][ique
st][atilde][iquest]-
bis(alkyl) derivs.
P-16-0234............ 3/2/2016 5/31/2016 CBI............. (G) Site (G) Benzoic acid,
contained alkylol-, branched
intermediate. and linear,
monosodium salts.
P-16-0237............ 3/1/2016 5/30/2016 CBI............. (G) Friction (S) 2-propenoic
modifier. acid, dodecyl
ester, polymer with
2-hydroxyethyl 2-
propenoate.
P-16-0238............ 3/2/2016 5/31/2016 H.B. Fuller (G) Industrial (G) Soybean oil,
Company. adhesive. ester with tetra
functional alcohol,
polymer with 1,1'-
methylenebis[4-
isocyanatobenzene]
and glycol ether.
P-16-0239............ 3/2/2016 5/31/2016 H.B. Fuller (G) Industrial (G) Soybean oil,
Company. adhesive. ester with tetra
functional alcohol,
polymer with 1,1'-
methylenebis[isocya
natobenzene] and
glycol ether.
P-16-0240............ 3/3/2016 6/1/2016 CBI............. (G) Resin for (G) Styrene(ated)
industrial copolymer with
coatings. alkylmethacrylate,
hydroxyalkylacrylat
e and acrylic acid.
P-16-0241............ 3/4/2016 6/2/2016 CBI............. (G) Component of (G) Polyester.
coatings.
P-16-0241............ 3/4/2016 6/2/2016 CBI............. (G) Component in (G) Polyester.
ink
formulations.
P-16-0241............ 3/4/2016 6/2/2016 CBI............. (G) Component in (G) Polyester.
adhesive
formulations.
P-16-0242............ 3/3/2016 6/1/2016 International (S) The notified (S) Cyclopentanol, 1-
Flavors And substance will ethyl-2-(3-
Fragrances Inc.. be used as a methylbutyl)-.
fragrance
ingredient,
being blended
(mixed) with
other fragrance
ingredients to
make fragrance
oils that will
be sold to
industrial and
commercial
customers for
their
incorporation
into soaps
detergents
cleaners air
fresheners
candles and
other similar
industrial,
household and
consumer
products.
P-16-0243............ 3/3/2016 6/1/2016 CBI............. (S) Binder for (S) Propanedioic
paint and acid, 1,3-diethyl
coatings. ester, polymer with
2,2-dimethyl-1,3-
propanediol and
hexahydro-1,3-
isobenzofurandione.
[[Page 26227]]
P-16-0246............ 3/4/2016 6/2/2016 CBI............. (G) Chemical (S) 2-
intermediate. pyridinecarboxylic
acid, 6-(4-chloro-2-
fluoro-3-
methoxyphenyl)-4,5-
difluoro-,
phenylmethyl ester.
P-16-0247............ 3/18/2016 6/16/2016 CBI............. (G) As a (S) 2-propenoic
stabilizer. acid, 2-methyl-,
polymer with
hexadecyl 2-methyl-
2-propenoate and
octadecyl 2-methyl-
2-propenoate.
P-16-0248............ 3/8/2016 6/6/2016 CBI............. (S) resin used (G) Methacrylate
for fiberglass blocked
reinforced polyurethane.
plastic (frp)
applications.
P-16-0249............ 3/10/2016 6/8/2016 CBI............. (G) Surface (G) Hydrazine
treatment derivatives.
substance.
P-16-0250............ 3/8/2016 6/6/2016 Allnex Usa Inc.. (S) Resin for (G) Substituted
improving carbomonocycle,
mechanical polymer with
properties in substituted
automotive alkanediol,
paints. alkanedioic acid,
alkanediol,
substituted
alkanoic acid and
substituted
carbomonocycle,
compd. with
substituted alkane.
P-16-0251............ 3/11/2016 6/9/2016 CBI............. (G) Pulp (G) Organic
bleaching manganese catalyst.
catalyst.
P-16-0252............ 3/11/2016 6/9/2016 CBI............. (G) A reactive (G) Polysiloxane
additive in with functional
polymeric groups.
formulations.
This functional
polymer may be
used in
industrial/
commercial
sealants,
adhesives and
coatings upon
end-use it
would be fully
incorporated
and bound into
the cured
polymers and
resins.
P-16-0253............ 3/10/2016 6/8/2016 CBI............. (G) Fatty acid (G) Partial esters
based glyceride of fatty acids with
blend. glycerol.
P-16-0254............ 3/10/2016 6/8/2016 CBI............. (G) Oil & gas (G) Polymer of
extraction. substituted acrylic
acid and
bromohexane.
P-16-0260............ 3/16/2016 6/14/2016 CBI............. (G) Gas generant (G) Melamine
in automotive nitrate.
air bag
inflators.
P-16-0261............ 3/11/2016 6/9/2016 CBI............. (S) Intermediate (S) Propanoic acid,
3-(dimethylamino)-2-
methyl-, methyl
ester.
P-16-0262............ 3/25/2016 6/23/2016 CBI............. (G) Bio-based (S) 9-octadecenoic
base oil. acid (9z)-,
homopolymer,
reaction products
with lauric acid, 2-
ethylhexyl esters,
hydrogenated.
P-16-0263............ 3/11/2016 6/9/2016 CBI............. (G) Fuel (G) Alkene polymer
additive. with anhydride and
imides.
P-16-0264............ 3/24/2016 6/22/2016 CBI............. (G) Reclaimed (G) Reclaimed
silicones. fluorinated
phenylmethyl
siloxane volatiles.
P-16-0265............ 3/24/2016 6/22/2016 CBI............. (G) Lubricant... (G) Fluorinated
phenylmethyl
siloxane.
P-16-0266............ 3/17/2016 6/15/2016 CBI............. (G) Adhesives... (G) Polyester
polyurethane
polyol.
P-16-0267............ 3/16/2016 6/14/2016 Allnex Usa Inc.. (S) Electro- (G) Fatty acids,
deposition polymers with
primer. substituted
carbomonocycle,
substituted
alkylamines,
heteromonocycle,
substituted
alkanoate, and
alkyleneamine,
lactates (salts).
P-16-0268............ 3/16/2016 6/14/2016 Colonial (G) Personal (S) Fatty acids, C18-
Chemical, Inc.. care use. unsaturated,
dimers,
hydrogenated,
polymers with N-[3-
(dimethylamino)prop
yl] coco amides,
N1, N1-dimethyl -
1,3-
dipropanediamine
and
epichlorohydrin.
P-16-0269............ 3/16/2016 6/14/2016 Weylchem US Inc. (S) Reactant in (S) Benzene,2-
the reaction. isothiocyanato-1,3-
bis(1-methylethyl)-
5-phenoxy-.
P-16-0270............ 3/18/2016 6/16/2016 CBI............. (G) Rheology (G) Derivative of
modifier. substituted
acrylamides
copolymer.
P-16-0271............ 3/18/2016 6/16/2016 Oxea Corporation (S) Flexible pvc (S) 1,2,4-
plasticizer for benzenetricarboxyli
wire insulation. c acid, 1,2,4-
trinonyl ester.
P-16-0272............ 3/18/2016 6/16/2016 CBI............. (G) Ingredient (S) Lecithins, soya,
in a formulated hydrogenated.
product.
[[Page 26228]]
P-16-0273............ 3/21/2016 6/19/2016 CBI............. (G) Ingredient (G) Alkyl
in metal heteromonocycle,
working fluids. polymer with
heteromonocycle,
carboxyalkyl alkyl
ether.
P-16-0274............ 3/21/2016 6/19/2016 CBI............. (G) Ingredient (G) Alkyl
In metal heteromonocycle,
working fluid. polymer with
heteromonocycle,
carboxyalkyl alkyl
ether.
P-16-0275............ 3/21/2016 6/19/2016 CBI............. (G) Surfactant.. (G) Rhamnolipid
salt.
P-16-0276............ 3/21/2016 6/19/2016 CBI............. (G) Surfactant.. (G) Rhamnolipids.
P-16-0278............ 3/24/2016 6/22/2016 CBI............. (G) Polymeric (G) 2-
Film Former For (chloromethyl)oxira
Coatings. ne and 4,4'-
methylenebis[alkylp
henol] polymer with
diphenol, reaction
products with 2-
propenoic acid, 2-
methyl-,
ethenylbenzene,
ethyl 2-propenoate
and 2-
(dimethylamino)etha
nol.
P-16-0280............ 3/25/2016 6/23/2016 CBI............. (G) Co-initiator (G) Polyether polyol
with aromatic
dialkylamine.
P-16-0281............ 3/30/2016 6/28/2016 CBI............. (G) Reactive (G) Fatty alcohols--
polyol. dimers, trimmers,
polymers.
P-16-0282............ 3/28/2016 6/26/2016 CBI............. (S) Paint dryier (G) Manganese
complexes.
P-16-0283............ 3/29/2016 6/27/2016 Allnex Usa Inc.. (S) Resin for (G) Alkanedioic
automotive acid, polymer with
coatings. substituted
carbomonocycle,
substituted alkane,
substituted
alkanoic acid and
substituted
alkyldiamine,
compd. with
substituted
alkanol.
P-16-0284............ 3/29/2016 6/27/2016 Deepak Nitrite (S) Optical (G) Anilino
Corporation brightener for substituted bis-
Inc.. textiles paper triazinyl
and paperboard. derivative of 4,4'-
diaminostilbene-
2,2'disulfonic
acid.
P-16-0285............ 3/31/2016 6/29/2016 CBI............. (G) Intermediate (G) Ester amine.
P-16-0286............ 3/31/2016 6/29/2016 CBI............. (G) Wellbore (G) Quaternary
additive. ammonium salts.
----------------------------------------------------------------------------------------------------------------
For the 39 NOCs received by EPA during this period, Table 3
provides the following information (to the extent that such information
is not claimed as CBI): The EPA case number assigned to the NOC; the
date the NOC was received by EPA; the projected date of commencement
provided by the submitter in the NOC; and the chemical identity.
Table 2--NOCs Received From March 1, 2016 to March 31, 2016
----------------------------------------------------------------------------------------------------------------
Commencement
Case No. Received date date Chemical
----------------------------------------------------------------------------------------------------------------
P-00-1105.............................. 3/4/2016 11/18/2004 (G) Hydroxy functional amino ester.
P-06-0205.............................. 3/31/2016 3/22/2016 (S) Butanenitrile, 4-
(dimethoxymethylsilyl)-2-methyl-.
P-09-0044.............................. 3/2/2016 2/23/2016 (S) Ruthenium, [1,3-bis(2,4,6-
trimethylphenyl)-2-
imidazolidinylidene]dichloro[[2-(1-
methylethoxy-ko)phenyl]methylene-kc]-,
(sp-5-41).
P-13-0622.............................. 3/31/2016 3/27/2016 (S) 1-propanamine,3-
(diethoxymethylsilyl)-N, N-dimethyl-.
P-13-0879.............................. 3/24/2016 3/22/2016 (G) Alkylphenol.
P-14-0035.............................. 3/22/2016 3/17/2016 (S) Butanedioic acid, 2-methylene-,
polymer with 2-propenoic acid and
sodium 2-methyl-2-[(1-oxo-2-propen-1-
yl)amino]-1-propanesulfonate (1:1),
sodium salt.
P-14-0079.............................. 3/28/2016 6/25/2014 (G) Synthetic polyol esters.
P-14-0334.............................. 3/1/2016 2/21/2016 (S) 2-propenoic acid, 2-methyl-,
heptadecyl ester, branched.
P-15-0028.............................. 3/30/2016 3/29/2016 (S) Silicon oxycarbide, carbon silicon
oxide.
P-15-0373.............................. 3/14/2016 3/12/2016 (G) Substituted carbopolycycle, polymer
with disubstituted alkane substituted
alkyl methacrylate-blocked.
P-15-0438.............................. 3/8/2016 3/2/2016 (G) Zinc carboxylate.
P-15-0550.............................. 3/22/2016 3/4/2016 (G) Tetrahydroalkyl aromatic
heterocyclic diketone, polymer with
dialkyleneglycol, trialkyleneglycol,
heterocyclic diketone and aromatic
heterocyclic diketone.
P-15-0551.............................. 3/22/2016 3/4/2016 (G) Aromatic heterocyclic diketone,
polymer with dialkyleneglycol,
trialkyleneglycol and alkenoic acid
glycidyl ester.
P-15-0568.............................. 3/15/2016 3/9/2016 (G) Alicyclic polycarboxylic acid,
polymer with alkyl methacrylate,
alkyldiol, alkyldioic acid,
polyalkyleneoxide, alkoxy
methacrylate, aromatic heterocyclic
diketone, aromatic diisocyanate,
heterocyclic ketone and
dialkyleneglycol.
P-15-0574.............................. 3/3/2016 2/19/2016 (G) 1,3-isobenzofurandione, 5,5[agrave]-
[2,2,2-trifluoro-1-(trifluoromethyl)
ethylidene]bis-, polymer with aromatic
amines.
P-15-0583.............................. 3/3/2016 2/25/2016 (G) Butanedioic acid, 2-
[[(alkyl)amino]methyl]-, 1,4-
bis(alkyl) ester.
P-15-0601.............................. 3/18/2016 2/23/2016 (G) Polymer of humic acid salt,
acrylamide and substituted sulfonic
acid.
P-15-0646.............................. 3/29/2016 2/29/2016 (S) Silane, (3-
chloropropyl)diethoxymethyl-.
P-15-0651.............................. 3/23/2016 3/11/2016 (G) Siloxanes and silicones, di methyl,
polyether modified.
[[Page 26229]]
P-15-0735.............................. 3/16/2016 2/26/2016 (S) Hydrocarbons, C5-rich, polymers
with (6e)-7,11-dimethyl-3-methylene-
1,6,10-dodecatriene, 2-methylbutene
and methylstyrene.
P-15-0736.............................. 3/31/2016 3/30/2016 (G) Castor oil, polymer with
substituted alkanoic acid, substituted
carbomonocycle, dialkyl substituted
alkanediol and tdi, substituted
alkanone-blocked.
P-15-0740.............................. 3/14/2016 3/11/2016 (G) Disubstituted alkanedioic acid,
polymer with substituted
carbomonocycle, dialkyl carbonate,
alkanediol and (alkylimino) bis
[alkanol], acetate (salt).
P-15-0752.............................. 3/23/2016 3/3/2016 (G) Polysiloxane, di-me,
epoxyfunctional.
P-15-0765.............................. 3/3/2016 2/9/2016 (S) 1,3-propanediol, 2-(dimethylamino)-
2-(hydroxymethyl)-.
P-16-0014.............................. 3/23/2016 3/8/2016 (G) Silicon, tris[dialkyl phenyl]-
dialkyl-dioxoalkane-naphthalene
disulfonate.
P-16-0020.............................. 3/9/2016 3/8/2016 (G) Polyethyleneglycol modified
polyacrylate, compd. with alcohol
amine.
P-16-0037.............................. 3/16/2016 2/26/2016 (S) Hydrocarbons, C5-rich, polymers
with (6e)-7,11-dimethyl-3-methylene-
1,6,10-dodecatriene, 2-methylbutene
and methylstyrene, manuf. of, by-
products from, C20 40 fraction.
P-16-0041.............................. 3/4/2016 2/22/2016 (G) Alkohol alkoxylate.
P-16-0052.............................. 3/31/2016 3/3/2016 (G) Dialkylol amine, polymer with
succinic anhydride and aromatic
carboxylic acid.
P-16-0053.............................. 3/28/2016 3/21/2016 (G) Acrylated polycarbonate polyol.
P-16-0073.............................. 3/4/2016 2/11/2016 (G) Styrene-acrylate polymer.
P-16-0077.............................. 3/22/2016 3/20/2016 (S) 5-octenoic acid, methyl ester, (5z)-
.
P-16-0087.............................. 3/30/2016 3/27/2016 (G) Dicaroxylic acid, polymer with
aminoalkanoic acid and polyether
polyol.
P-16-0105.............................. 3/7/2016 2/25/2016 (G) Alkyl polyol salt.
P-16-0111.............................. 3/9/2016 3/4/2016 (G) Fatty acids, reaction products with
alkylamine, polymers with substituted
carbomonocycle, substituted
alkylamines, heteromonocycle and
substituted alkanoate, acetates
(salts).
P-16-0112.............................. 3/9/2016 3/4/2016 (G) Substituted heteromonocycle,
polymer with substituted
carbomonocycle and alkyl
(hydroxyalkyl)alkanediol,
alkoxyalkanol-blocked.
P-16-0118.............................. 3/30/2016 3/21/2016 (S) 2-propenoic acid, 2-methyl-, 2-
dodecylhexadecyl ester, polymer with
methyl 2-methyl-2-propenoate and 2-
tetradecyloctadecyl 2-methyl-2-
propenoate.
P-92-0038.............................. 3/16/2016 2/25/2016 (S) Polytitanocarbosilane.
P-99-0100.............................. 3/23/2016 3/21/2016 (G) Polyether amino acrylate.
----------------------------------------------------------------------------------------------------------------
Authority: 15 U.S.C. 2601 et seq.
Dated: April 26, 2016.
Pamela S. Myrick,
Director, Information Management Division, Office of Pollution
Prevention and Toxics.
[FR Doc. 2016-10229 Filed 4-29-16; 8:45 am]
BILLING CODE 6560-50-P
