Certain New Chemicals; Receipt and Status Information for September 2015, 70201-70206 [2015-28842]
Download as PDF
<![CDATA[
Federal Register / Vol. 80, No. 219 / Friday, November 13, 2015 / Notices
if delegated), for example, to: (1)
Confirm compliance status of stationary
sources; (2) identify any stationary
sources not subject to the requirements
and identify stationary sources subject
to the regulations; and (3) ensure that
the stationary source control
requirements are being achieved. All
information submitted to us pursuant to
the recordkeeping and reporting
requirements for which a claim of
confidentiality is made is safeguarded
according to the agency policies set
forth in 40 CFR part 2, subpart B.
Form Numbers: None.
Respondents/affected entities:
Owners or operators of oil and natural
gas facilities.
Respondent’s obligation to respond:
Mandatory (42 U.S.C. 7414).
Estimated number of respondents:
780 (total).
Frequency of response: On occasion,
annually.
Total estimated burden: 29,655 hours
(per year). Burden is defined at 5 CFR
1320.3(b).
Total estimated cost: $6,503,000 (per
year), includes $5,121,000 annualized
capital or operation and maintenance
costs.
Changes in Estimates: There is likely
an increase in burden in this ICR
compared with the ICR currently
approved by OMB due to an anticipated
adjustment in the estimated number of
respondents to account for industry
growth. In addition, there is likely an
increase in cost in this ICR to take into
account current labor rates.
Dated: November 3, 2015.
Darcy O’Connor,
Acting Assistant Regional Administrator,
Office of Partnerships and Regulatory
Assistance, Region 8.
[FR Doc. 2015–28836 Filed 11–12–15; 8:45 am]
BILLING CODE 6560–50–P
ENVIRONMENTAL PROTECTION
AGENCY
[EPA–HQ–OPPT–2015–0504; FRL–9936–40]
Certain New Chemicals; Receipt and
Status Information for September 2015
under EPA review and the receipt of
notices of commencement (NOC) to
manufacture those chemicals. This
document covers the period from
September 1, 2015 to September 30,
2015.
Comments identified by the
specific case number provided in this
document, must be received on or
before December 14, 2015.
ADDRESSES: Submit your comments,
identified by docket identification (ID)
number EPA–HQ–OPPT–2015–0504,
and the specific PMN number or TME
number for the chemical related to your
comment, by one of the following
methods:
• Federal eRulemaking Portal: https://
www.regulations.gov. Follow the online
instructions for submitting comments.
Do not submit electronically any
information you consider to be
Confidential Business Information (CBI)
or other information whose disclosure is
restricted by statute.
• Mail: Document Control Office
(7407M), Office of Pollution Prevention
and Toxics (OPPT), Environmental
Protection Agency, 1200 Pennsylvania
Ave. NW., Washington, DC 20460–0001.
• Hand Delivery: To make special
arrangements for hand delivery or
delivery of boxed information, please
follow the instructions at https://
www.epa.gov/dockets/contacts.html.
Additional instructions on
commenting or visiting the docket,
along with more information about
dockets generally, is available at
https://www.epa.gov/dockets.
FOR FURTHER INFORMATION CONTACT: For
technical information contact: Jim
Rahai, IMD 7407M, Office of Pollution
Prevention and Toxics, Environmental
Protection Agency, 1200 Pennsylvania
Ave. NW., Washington, DC 20460–0001;
telephone number: (202) 564–8593;
email address: rahai.jim@epa.gov.
For general information contact: The
TSCA-Hotline, ABVI-Goodwill, 422
South Clinton Ave. Rochester, NY
14620; telephone number: (202) 554–
1404; email address: TSCA-Hotline@
epa.gov.
DATES:
SUPPLEMENTARY INFORMATION:
Environmental Protection
Agency (EPA).
ACTION: Notice.
I. General Information
EPA is required under the
Toxic Substances Control Act (TSCA) to
publish in the Federal Register a notice
of receipt of a premanufacture notice
(PMN); an application for a test
marketing exemption (TME), both
pending and/or expired; and a periodic
status report on any new chemicals
This action is directed to the public
in general. As such, the Agency has not
attempted to describe the specific
entities that this action may apply.
Although others may be affected, this
action applies directly to the submitters
of the actions addressed in this
document.
jstallworth on DSK7TPTVN1PROD with NOTICES
AGENCY:
SUMMARY:
VerDate Sep<11>2014
15:03 Nov 12, 2015
Jkt 238001
A. Does this action apply to me?
PO 00000
Frm 00018
Fmt 4703
Sfmt 4703
70201
B. What should I consider as I prepare
my comments for EPA?
1. Submitting CBI. Do not submit this
information to EPA through
regulations.gov or email. Clearly mark
the part or all of the information that
you claim to be CBI. For CBI
information in a disk or CD–ROM that
you mail to EPA, mark the outside of the
disk or CD–ROM as CBI and then
identify electronically within the disk or
CD–ROM the specific information that
is claimed as CBI. In addition to one
complete version of the comment that
includes information claimed as CBI, a
copy of the comment that does not
contain the information claimed as CBI
must be submitted for inclusion in the
public docket. Information so marked
will not be disclosed except in
accordance with procedures set forth in
40 CFR part 2.
2. Tips for preparing your comments.
When preparing and submitting your
comments, see the commenting tips at
https://www.epa.gov/dockets/
comments.html.
II. What action is the agency taking?
This document provides receipt and
status reports, which cover the period
from September 1, 2015 to September
30, 2015, and consists of the PMNs and
TMEs both pending and/or expired, and
the NOCs to manufacture a new
chemical that the Agency has received
under TSCA section 5 during this time
period.
III. What is the agency’s authority for
taking this action?
Under TSCA, 15 U.S.C. 2601 et seq.,
EPA classifies a chemical substance as
either an ‘‘existing’’ chemical or a
‘‘new’’ chemical. Any chemical
substance that is not on EPA’s TSCA
Inventory is classified as a ‘‘new
chemical,’’ while those that are on the
TSCA Inventory are classified as an
‘‘existing chemical.’’ For more
information about the TSCA Inventory
go to: https://www.epa.gov/opptintr/
newchems/pubs/inventory.htm.
Anyone who plans to manufacture or
import a new chemical substance for a
non-exempt commercial purpose is
required by TSCA section 5 to provide
EPA with a PMN, before initiating the
activity. Section 5(h)(1) of TSCA
authorizes EPA to allow persons, upon
application, to manufacture (includes
import) or process a new chemical
substance, or a chemical substance
subject to a significant new use rule
(SNUR) issued under TSCA section 5(a),
for ‘‘test marketing’’ purposes, which is
referred to as a test marketing
exemption, or TME. For more
E:\FR\FM\13NON1.SGM
13NON1
70202
Federal Register / Vol. 80, No. 219 / Friday, November 13, 2015 / Notices
information about the requirements
applicable to a new chemical go to:
https://www.epa.gov/oppt/newchems.
Under TSCA sections 5(d)(2) and
5(d)(3), EPA is required to publish in
the Federal Register a notice of receipt
of a PMN or an application for a TME
and to publish in the Federal Register
periodic reports on the status of new
chemicals under review and the receipt
of NOCs to manufacture those
chemicals.
IV. Receipt and Status Reports
As used in each of the tables in this
unit, (S) indicates that the information
in the table is the specific information
provided by the submitter, and (G)
indicates that the information in the
table is generic information because the
specific information provided by the
submitter was claimed as CBI.
For the 55 PMNs received by EPA
during this period, Table 1 provides the
following information (to the extent that
such information is not claimed as CBI):
The EPA case number assigned to the
PMN; The date the PMN was received
by EPA; the projected end date for
EPA’s review of the PMN; the
submitting manufacturer/importer; the
potential uses identified by the
manufacturer/importer in the PMN; and
the chemical identity.
TABLE 1—PMNS RECEIVED FROM SEPTEMBER 1, 2015 TO SEPTEMBER 30, 2015
Date
received
Case No.
Projected
end date for
EPA review
Manufacturer/
importer
Use(s)
Chemical identity
(G) Alkyl alkenoic acid, substituted
alkyl ester, polymer with alkyl
alkenoate and substituted alkyl
alkenoate compd. with alkyl alkyl
carbomonocyclic salt.
(G) Cellulose, polymer with substituted oxirane, 2-(diethylamino)
ethyl ether.
(G) Modified polyacrylamide.
(G) Oxirane, 2-ethyl-, homopolymer,
3-(5-carboxy-1,3-dihydro-,1,3dioxo-2H-isoindol-2-yl) alkyl ethers.
(G) Triethoxysilylalkoxy polyalkylene
glycol urethane.
(G) Triethoxysilylalkoxy polyalkylene
glycol urethane.
(S) Poly (1,4-diisopropyl benzene).
8/26/2015
11/24/2015
CBI .......................
(G) Additive in toner ...........
P–15–0713 ...........
9/1/2015
11/30/2015
CBI .......................
(G) Contained use ..............
P–15–0714 ...........
P–15–0715 ...........
9/1/2015
9/3/2015
11/30/2015
12/2/2015
Kemira .................
CBI .......................
(G) Paper strength additive
(G) Additive for inks ............
P–15–0717 ...........
9/3/2015
12/2/2015
CBI .......................
(G) Adhesive additive .........
P–15–0718 ...........
9/3/2015
12/2/2015
CBI .......................
(G) Adhesive additive .........
P–15–0719 ...........
9/3/2015
12/2/2015
CBI .......................
P–15–0720 ...........
9/4/2015
12/3/2015
CBI .......................
P–15–0721 ...........
9/4/2015
12/3/2015
CBI .......................
P–15–0722 ...........
9/4/2015
12/3/2015
CBI .......................
P–15–0723 ...........
9/4/2015
12/3/2015
CBI .......................
P–15–0724 ...........
9/4/2015
12/3/2015
CBI .......................
P–15–0725 ...........
9/4/2015
12/3/2015
CBI .......................
P–15–0726 ...........
9/4/2015
12/3/2015
CBI .......................
P–15–0728 ...........
9/9/2015
12/8/2015
TAKASAGO .........
P–15–0728 ...........
9/9/2015
12/8/2015
TAKASAGO .........
P–15–0728 ...........
9/9/2015
12/8/2015
TAKASAGO .........
P–15–0728 ...........
9/9/2015
12/8/2015
TAKASAGO .........
P–15–0730 ...........
9/10/2015
12/9/2015
CBI .......................
P–15–0731 ...........
9/10/2015
12/9/2015
CBI .......................
P–15–0733 ...........
jstallworth on DSK7TPTVN1PROD with NOTICES
P–15–0703 ...........
9/10/2015
12/9/2015
Cadence Chemical Corporation.
(G) Flame retardant synergist.
(S) Polyurethane
prepolymer.
(S) Polyurethane
prepolymer.
(S) Polyurethane
prepolymer.
(S) Polyurethane
prepolymer.
(S) Polyurethane
prepolymer.
(S) Polyurethane
prepolymer.
(S) Co-polymer for use in
adhesives and sealant
formulations.
(S) Fragrance in household
products.
(S) Fragrance in a fine fragrance.
(S) Fragrance in consumer
products.
(S) Fragrance in other products.
(G) Additive for paper and
paperboard.
(G) Additive for paper and
paperboard.
(S) Coating for glass ..........
P–15–0734 ...........
9/11/2015
12/10/2015
CBI .......................
VerDate Sep<11>2014
15:03 Nov 12, 2015
Jkt 238001
PO 00000
Frm 00019
Fmt 4703
(S) Wastewater Heavy Metals Removal.
Sfmt 4703
E:\FR\FM\13NON1.SGM
(G) Aliphatic polyester polyol.
(G) Aliphatic polyester polyol.
(G) Aliphatic polyester polyol.
(G) Aliphatic polyester polyol.
(G) Aliphatic polyester polyol.
(G) Aliphatic polyester polyol.
(G) Triethoxysilylalkoxy polyalkylene
glycol.
(S) Benzenemethanol, 3-ethoxy-4-hydroxy-.
(S) Benzenemethanol, 3-ethoxy-4-hydroxy-.
(S) Benzenemethanol, 3-ethoxy-4-hydroxy-.
(S) Benzenemethanol, 3-ethoxy-4-hydroxy-.
(G) Amphoteric polyacrylamide.
(G) Amphoteric polyacrylamide.
(G) Alkane carboxylic acid, hydroxy,
hydroxyalkyl-alkyl, polymer with
.alpha.-hydro-.omega.hydroxypoly(oxy-1,2-ethanediyl)
ether with alkyl-(hydroxyalkyl)alkanediol (X:1), .alpha.-hydro.omega.-hydroxypoly[oxy(alkylalkyldiyl)] and alkylenebis
[isocyanatoalkane],-blocked.
(G) Polymeric Sulfide.
13NON1
Federal Register / Vol. 80, No. 219 / Friday, November 13, 2015 / Notices
70203
TABLE 1—PMNS RECEIVED FROM SEPTEMBER 1, 2015 TO SEPTEMBER 30, 2015—Continued
Date
received
Case No.
Projected
end date for
EPA review
Manufacturer/
importer
Use(s)
Chemical identity
(S) Hydrocarbons, C5-rich, polymers
with (6E)-7, 11-dimethyl-3-methylene-1,6,10-dodecatriene, 2methylbutene and methylstyrene.
(S) Hydrocarbons, C5-rich, polymers
with (6E)-7, 11-dimethyl-3-methylene-1,6,10-dodecatriene, 2methylbutene and methylstyrene.
(G) Castor oil, polymer with substituted alkanoic acid, substituted
carbomonocycle, dialkyl substituted alkanediol and TDI, substituted alkanone-blocked.
(G) Ammonium salts of phosphate
methacrylate.
(G) Polysiloxane-polycarbonate copolymer.
9/15/2015
12/14/2015
Cray Valley USA,
LLC.
(S) Adhesive Formulation ...
P–15–0735 ...........
9/15/2015
12/14/2015
Cray Valley USA,
LLC.
(S) Rubber Formulation ......
P–15–0736 ...........
9/18/2015
12/17/2015
CBI .......................
(S) Industrial coating resin
for wood substances.
P–15–0737 ...........
9/16/2015
12/15/2015
CBI .......................
(G) Intermediate .................
P–15–0738 ...........
9/17/2015
12/16/2015
CBI .......................
P–15–0739 ...........
9/17/2015
12/16/2015
CBI .......................
P–15–0740 ...........
9/17/2015
12/16/2015
Allnex USA, Inc ...
(S) Injection molding additive to improve the physical properties of plastic
parts.
(S) Component of Flexible
Foam.
(S) Digital printing applications.
P–15–0741 ...........
9/17/2015
12/16/2015
CBI .......................
P–15–0742 ...........
9/17/2015
12/16/2015
CBI .......................
P–15–0743 ...........
9/17/2015
12/16/2015
Eden Innovations
P–15–0744 ...........
9/18/2015
12/17/2015
3 M Company ......
(G) The liquid solution is an
admixture that is used by
the concrete industry to
enhance product performance. It is mainly used to
increase the concrete’s
abrasion resistance, and
increase the compressive
and split tensile
strengths; see internal
comments.
(G) Construction material ...
P–15–0745 ...........
9/18/2015
12/17/2015
3 M Company ......
(G) Construction material ...
P–15–0746 ...........
jstallworth on DSK7TPTVN1PROD with NOTICES
P–15–0735 ...........
9/18/2015
12/17/2015
3 M Company ......
(G) Construction material ...
P–15–0747 ...........
9/18/2015
12/17/2015
3 M Company ......
(G) Construction material ...
P–15–0748 ...........
9/18/2015
12/17/2015
3 M Company ......
(G) Construction material ...
VerDate Sep<11>2014
15:03 Nov 12, 2015
Jkt 238001
PO 00000
Frm 00020
Fmt 4703
(S) Mixture of modified urethane polymers used as
a deflocculating and dispersing additive in industrial coatings.
(G) Component for tire .......
Sfmt 4703
E:\FR\FM\13NON1.SGM
(G) Epoxy Terminated Polymer.
(G) Disubstituted alkanedioic acid,
polymer with substituted
carbomonocycle, dialkyl carbonate,
alkanediol and (alkylimino) bis
[alkanol], acetate (salt).
(G) Mixture of Modified urethane
polymers.
(G) Modified Copolymer of Buta-1,3diene and Styrene.
(G) Nano particle liquid concrete admixture.
(G) Naturally-occurring minerals, reaction products with boron sodium
oxide (b4na2o7), hetero substituted alkyl acrylate polymer, kaolin and sodium silicate.
(G) Naturally-occurring minerals, reaction products with boron sodium
oxide (b4na2o7), hetero substituted alkyl acrylate polymer, kaolin and sodium silicate.
(G) Naturally-occurring minerals, reaction products with boron sodium
oxide (b4na2o7), hetero substituted alkyl acrylate polymer, kaolin and sodium silicate.
(G) Naturally-occurring minerals, reaction products with boron sodium
oxide (b4na2o7), hetero substituted alkyl acrylate polymer, kaolin and sodium silicate.
(G) Naturally-occurring minerals, reaction products with hetero substituted alkyl acrylate polymer, kaolin and sodium silicate.
13NON1
70204
Federal Register / Vol. 80, No. 219 / Friday, November 13, 2015 / Notices
TABLE 1—PMNS RECEIVED FROM SEPTEMBER 1, 2015 TO SEPTEMBER 30, 2015—Continued
Date
received
Case No.
Projected
end date for
EPA review
Manufacturer/
importer
Use(s)
Chemical identity
(G) Naturally-occurring minerals, reaction products with hetero substituted alkyl acrylate polymer, kaolin and sodium silicate.
(G) Naturally-occurring minerals, reaction products with hetero substituted alkyl acrylate polymer, kaolin and sodium silicate.
(G) Naturally-occurring minerals, reaction products with hetero substituted alkyl acrylate polymer, kaolin and sodium silicate.
(G) Polysiloxane, di-Me,
epoxyfunctional.
(G) Polyester amine adduct.
9/18/2015
12/17/2015
3 M Company ......
(G) Construction material ...
P–15–0750 ...........
9/18/2015
12/17/2015
3 M Company ......
(G) Construction material ...
P–15–0751 ...........
9/18/2015
12/17/2015
3 M Company ......
(G) Construction material ...
P–15–0752 ...........
9/22/2015
12/21/2015
CBI .......................
P–15–0753 ...........
9/22/2015
12/21/2015
CBI .......................
P–15–0754 ...........
9/22/2015
12/21/2015
CBI .......................
P–15–0755 ...........
9/22/2015
12/21/2015
CBI .......................
P–15–0759 ...........
9/24/2015
12/23/2015
CBI .......................
P–15–0760 ...........
9/24/2015
12/23/2015
CBI .......................
P–15–0761 ...........
9/24/2015
12/23/2015
CBI .......................
P–15–0762 ...........
9/24/2015
12/23/2015
CBI .......................
P–15–0763 ...........
9/24/2015
12/23/2015
CBI .......................
P–15–0764 ...........
9/24/2015
12/23/2015
CBI .......................
P–15–0765 ...........
9/25/2015
12/24/2015
9/28/2015
12/27/2015
ANGUS Chemical
Company.
Reichhold .............
(G) Additive, open, non-dispersive use.
(G) Additive, open, non-dispersive use.
(G) Additive, open, non-dispersive use.
(G) Additive, open, non-dispersive use.
(G) Polyurethane
prepolymer for use in
cast polyurethane elastomer parts: Open, nondispersive use.
(G) Polyurethane
prepolymer for use in
cast polyurethane elastomer parts: Open, nondispersive use.
(G) Polyurethane
prepolymer for use in
cast polyurethane elastomer parts: Open, nondispersive use.
(G) Polyurethane
prepolymer for use in
cast polyurethane elastomer parts: Open, nondispersive use.
(G) Polyurethane
prepolymer for use in
cast polyurethane elastomer parts: Open, nondispersive use.
(G) Polyurethane
prepolymer for use in
cast polyurethane elastomer parts: Open, nondispersive use.
(G) Chemical Absorbant .....
P–15–0766 ...........
P–15–0767 ...........
9/29/2015
12/28/2015
Reichhold .............
P–15–0768 ...........
9/29/2015
12/28/2015
Allnex USA, Inc ...
P–15–0769 ...........
jstallworth on DSK7TPTVN1PROD with NOTICES
P–15–0749 ...........
9/30/2015
12/29/2015
LUNA, Inc ............
For the one TME received by EPA
during this period, Table 2 provides the
following information (to the extent that
such information is not claimed as CBI):
VerDate Sep<11>2014
15:03 Nov 12, 2015
Jkt 238001
(S) Resin for flame retardant polyesters.
(S) Resin used for flame retardant polyester applications.
(S) Crosslinker in the construction of an in-site encapsulation product.
(S) Component of protective coating.
The EPA case number assigned to the
TME, the date the TME was received by
EPA, the projected end date for EPA’s
review of the TME, the submitting
PO 00000
Frm 00021
Fmt 4703
Sfmt 4703
(G) Polyester amine adduct.
(G) Polyester amine adduct.
(G) Isocyanate-terminated urethane
prepolymer.
(G) Isocyanate-terminated urethane
prepolymer.
(G) Isocyanate-terminated polyesterbased urethane prepolymer.
(G) Isocyanate-terminated polyesterbased urethane prepolymer.
(G) Isocyanate-terminated polyesterbased urethane prepolymer.
(G) Isocyanate-terminated
polybutadiene-based urethane
polymer.
(G) Tertiary Amino Polyol.
(G) Halogenated epoxy polymer with
alkeneoic acid.
(G) Halogenated bisphenol a, polymer with epoxy resin and phenolic
epoxy, alkeneoic acids.
(G) Alkanedial, polymer with
alkyleneurea and alkyl-alkanediol.
(G) Polyurethane Silane.
manufacturer/importer, the potential
uses identified by the manufacturer/
importer in the TME, and the chemical
identity.
E:\FR\FM\13NON1.SGM
13NON1
Federal Register / Vol. 80, No. 219 / Friday, November 13, 2015 / Notices
70205
TABLE 2—TME RECEIVED FROM SEPTEMBER 1, 2015 TO SEPTEMBER 30, 2015
Projected
end date for
EPA review
Date
received
Case No.
T–15–0017 ...........
9/21/2015
Manufacturer/
importer
11/5/2015
For the 25 NOCs received by EPA
during this period, Table 3 provides the
following information (to the extent that
such information is not claimed as CBI):
Use
NON–CBI .............
Chemical identity
Resin for coating formulation.
The EPA case number assigned to the
NOC; the date the NOC was received by
EPA; the projected date of
commencement provided by the
(S) EHTM.
submitter in the NOC; and the chemical
identity.
TABLE 3—NOCS RECEIVED FROM SEPTEMBER 1, 2015 TO SEPTEMBER 30, 2015
Case No.
Projected
date of
commencement
Received
date
J–15–0017 ...........................
P–12–0078 ..........................
9/11/2015
9/15/2015
8/14/2015
8/26/2015
P–12–0437 ..........................
9/3/2015
8/13/2015
..........................
..........................
..........................
..........................
..........................
..........................
..........................
..........................
..........................
9/9/2015
9/24/2015
9/24/2015
9/10/2015
9/3/2015
9/29/2015
9/1/2015
9/24/2015
9/14/2015
8/12/2015
9/15/2015
9/22/2015
9/10/2015
8/31/2015
9/2/2015
8/28/2015
9/2/2015
8/31/2015
P–15–0311 ..........................
P–15–0364 ..........................
9/18/2015
9/23/2015
9/3/2015
9/13/2015
P–15–0365 ..........................
9/2/2015
8/21/2015
P–15–0390 ..........................
9/10/2015
9/3/2015
P–15–0396 ..........................
9/24/2015
9/4/2015
P–15–0410 ..........................
9/18/2015
8/18/2015
P–15–0411 ..........................
P–15–0427 ..........................
9/7/2015
9/24/2015
9/3/2015
8/9/2015
P–15–0456 ..........................
P–15–0466 ..........................
P–15–0467 ..........................
9/4/2015
9/16/2015
9/18/2015
8/21/2015
9/11/2015
9/14/2015
P–15–0495 ..........................
9/9/2015
8/30/2015
P–15–0497 ..........................
9/9/2015
8/30/2015
jstallworth on DSK7TPTVN1PROD with NOTICES
P–13–0246
P–13–0309
P–14–0142
P–14–0605
P–14–0738
P–14–0809
P–15–0036
P–15–0152
P–15–0308
VerDate Sep<11>2014
15:03 Nov 12, 2015
Jkt 238001
PO 00000
Frm 00022
Chemical identity
(G) Modified organism.
(S) 1-Octanesulfonic acid, 3,3,4,4,5,5,6,6,7,7,8,8,8-tridecafluoro-, barium salt
(2:1).
(S) Quaternary ammonium compounds, bis (hydrogenated tallow alkyl) dimethyl, salts with tannins.
(G) Cobalt based polymer with fatty acids, and polyol.
(S) Alcohols, c9-11-branched, ethoxylated propoxylated.
(G) Ethoxylated Resin.
(G) Substituted cyclosiloxane.
(G) Polyalkylene ether alkyl phosphate polyurethane prepolymer.
(G) Depolymerized waste plastics.
(S) 2-Pyridinecarboxylic acid, 4,5,6-trichloro-.
(G) Urethane acrylate.
(G) Dicarboxylic acid, cycloaliphatic anhydride polymer with alkyldiol, hydroxy[(oxoalkyl)oxy]alkyl ester.
(G) Triarylsulfonium salt with haloalkyl phosphate.
(G) Reaction mixture of copper, [29h,31h-phthalocyaninato(2-).kappa.n29,.kappa.n30,.kappa.n31,.kappa.n32]-, (sp-4–1)- and metal, [substituted 29h,31h-phthalocyanine-.kappa.n29,.kappa.n30,.kappa.
n31,lkappa.n32]-.
(G) Alkyl alkenoic acid polymers with alkyl acrylate, alkyl methacrylate,
polyether methacrylate alkyl ethers and substituted heteromonocycle,
compds. with substituted alkyl alkanol.
(G) Substituted carbopolycyclic dicarboxylic acid dialkyl ester, polymer with
dialkyl carbopolycyclic ester, alkanediol and carbopolycyclic bis (substituted
carbomonocycle).
(G) Alkylmethacrylate, polymer with alkenylbenzene, branched
alkylmethacrylate, hydroxyalkylmethacrylate and acrylic acid, t-butyl
alkaneperoxoic acid ester-initiated.
(S) 1,3-Butadiene, homopolymer, hydrogenated, 2-hydroxyethyl-terminated,
bis[n-[4-[(4-isocyanatophenyl)methyl]phenyl]carbamates].
(G) Fatty acid esters with polyols polyalkyl ethers.
(G) Substituted alkylene carbomonocycle, homopolymer, substituted polyol and
mono alkyl ether-blocked polyol.
(G) Amine functional epoxy, organic acid salt.
(G) Acrylic acid polymer.
(S) 2-Oxepanone, polymer with 5-amino-1,3,3trimethylcyclohexanemethanamine, 1,2-ethanediol and 5-isocyanato-1(isocyanatomethyl)-1,3,3-trimethylcyclohexane.
(G) Aromatic anhydride, polymer with alkane diol and alkane triol, 2propenoate.
(G) Bisphenol an epoxy polymer with aromatic anhydride, mixed caprolactone
acrylate and hydroxyethyl acrylate esters.
Fmt 4703
Sfmt 4703
E:\FR\FM\13NON1.SGM
13NON1
70206
Federal Register / Vol. 80, No. 219 / Friday, November 13, 2015 / Notices
Authority: 15 U.S.C. 2601 et seq.
Dated: November 5, 2015.
Pamela Myrick,
Acting Director, Information Management
Division, Office of Pollution Prevention and
Toxics.
[FR Doc. 2015–28842 Filed 11–12–15; 8:45 am]
BILLING CODE 6560–50–P
ENVIRONMENTAL PROTECTION
AGENCY
[ER–FRL–9023–9]
jstallworth on DSK7TPTVN1PROD with NOTICES
Environmental Impact Statements;
Notice of Availability Responsible
Agency: Office of Federal Activities,
General Information (202) 564–7146 or
https://www2.epa.gov/nepa
Weekly receipt of Environmental Impact
Statements (EISs)
Filed 11/02/2015 Through 11/06/2015
Pursuant to 40 CFR 1506.9.
Notice: Section 309(a) of the Clean Air
Act requires that EPA make public its
comments on EISs issued by other
Federal agencies. EPA’s comment letters
on EISs are available at: https://
www.cdxnodengn.epa.gov/cdx-nepapublic/action/eis/search.
EIS No. 20150312, Draft, FRA, 00,
Northeast Corridor (NEC) FUTURE
Program Tier 1, Comment Period
Ends: 01/30/2016, Contact: Rebecca
Reyes-Alicea 212–668–2282
EIS No. 20150313, Draft, NRC, MI,
Generic—License Renewal of Nuclear
Plants: Supplement 56 Regarding
Fermi 2 Nuclear Power Plant,
Comment Period Ends: 12/28/2015,
Contact: Elaine M. Keegan 301–415–
8517
EIS No. 20150314, Draft, NOAA, WA,
Analyze Impacts of NOAA’s National
Marine Fisheries Service Proposed
4(d) Determination under Limit 6 for
Five Early Winter Steelhead Hatchery
Programs in Puget Sound, Comment
Period Ends: 12/28/2015, Contact:
Steve Leider 360–753–4650
EIS No. 20150315, Final, BLM, CA,
Desert Renewable Energy
Conservation Plan Proposed Land Use
Plan Amendment, Review Period
Ends: 12/14/2015, Contact: Vicki
Campbell 916–978–4401
EIS No. 20150316, Final, DOE, OK,
Plains and Eastern Clean Line
Transmission Line Project, Review
Period Ends: 12/14/2015, Contact: Dr.
Jane Summerson 505–845–4091
EIS No. 20150317, Final, USACE, USFS,
MN, NorthMet Mining Project and
Land Exchange, Review Period Ends:
12/14/2015, Contact: Douglas Bruner
651–290–5378
VerDate Sep<11>2014
15:03 Nov 12, 2015
Jkt 238001
The U.S. Department of Army’s Corps
of Engineers and the U.S. Department of
Agriculture’s Forest Service are joint
lead agencies for the above project.
EIS No. 20150318, Final, USFS, ID,
Salmon-Challis National Forest
Invasive Plant Treatment, Review
Period Ends: 01/04/2016, Contact:
Jennifer Purvine 208–879–4162
Amended Notices:
EIS No. 20150278, Draft, USACE, GA,
Update of the Water Control Manual
for the Apalachicola-ChattahoocheeFlint River Basin in Alabama, Florida,
and Georgia and Water Supply
Storage Assessment, Comment Period
Ends: 01/15/2016, Contact: Lewis C.
Sumner 251–694–3857
Revision to FR Notice Published 10/
09/2015; Extending Comment Period
from 12/01/2015 to 01/15/2016
Dated: November 9, 2015.
Dawn Roberts,
Management Analyst, NEPA Compliance
Division, Office of Federal Activities.
[FR Doc. 2015–28890 Filed 11–12–15; 8:45 am]
BILLING CODE 6560–50–P
ENVIRONMENTAL PROTECTION
AGENCY
[EPA–HQ–OPP–2015–0634; FRL–9934–46]
Cancellation of Pesticides for NonPayment of Year 2015 Registration
Maintenance Fees; Summary of Orders
Issued
Environmental Protection
Agency (EPA).
ACTION: Notice.
AGENCY:
Under the Federal Insecticide,
Fungicide, and Rodenticide Act
(FIFRA), the payment of an annual
maintenance fee is required to keep
pesticide registrations in effect. The fee
due last January 15, 2015, has gone
unpaid for the 236 registrations
identified in this document. If the fee is
not paid, the EPA Administrator may
cancel these registrations by order and
without a hearing; orders to cancel these
registrations have been issued.
FOR FURTHER INFORMATION CONTACT:
Mick Yanchulis, Information
Technology and Resources Management
Division (7502P), Office of Pesticide
Programs, Environmental Protection
Agency, 1200 Pennsylvania Ave. NW.,
Washington, DC 20460–0001; telephone
number: (703) 347–0237; email address:
yanchulis.michael@epa.gov.
Product-specific status inquiries may
be made by calling toll-free, 1–800–444–
7255.
SUPPLEMENTARY INFORMATION:
SUMMARY:
PO 00000
Frm 00023
Fmt 4703
Sfmt 4703
I. General Information
A. Does this action apply to me?
This action is directed to the public
in general. Although this action may be
of particular interest to persons who
produce or use pesticides, the Agency
has not attempted to describe all the
specific entities that may be affected by
this action.
B. How can I get copies of this document
and other related information?
The docket for this action, identified
by docket identification (ID) number
EPA–HQ–OPP–2015–0634, is available
at https://www.regulations.gov or at the
Office of Pesticide Programs Regulatory
Public Docket (OPP Docket) in the
Environmental Protection Agency
Docket Center (EPA/DC), West William
Jefferson Clinton Bldg., Rm. 3334, 1301
Constitution Ave. NW., Washington, DC
20460–0001. The Public Reading Room
is open from 8:30 a.m. to 4:30 p.m.,
Monday through Friday, excluding legal
holidays. The telephone number for the
Public Reading Room is (202) 566–1744,
and the telephone number for the OPP
Docket is (703) 305–5805. Please review
the visitor instructions and additional
information about the docket available
at https://www.epa.gov/dockets.
Complete lists of registrations
canceled for non-payment of the
maintenance fee are also available for
reference in the OPP Docket.
II. Background
Section 4(i)(5) of FIFRA (7 U.S.C.
136a–1(i)(5)) requires that all pesticide
registrants pay an annual registration
maintenance fee, due by January 15 of
each year, to keep their registrations in
effect. This requirement applies to all
registrations granted under FIFRA
section 3 (7 U.S.C. 136a) as well as those
granted under FIFRA section 24(c) (7
U.S.C. 136v(c)) to meet special local
needs. Registrations for which the fee is
not paid are subject to cancellation by
order and without a hearing.
Under FIFRA, the EPA Administrator
may reduce or waive maintenance fees
for minor agricultural use pesticides
when it is determined that the fee
would be likely to cause significant
impact on the availability of the
pesticide for the use.
In fiscal year 2015, maintenance fees
were collected in one billing cycle. In
late October of 2014, all holders of
either FIFRA section 3 registrations or
FIFRA section 24(c) registrations were
sent lists of their active registrations,
along with forms and instructions for
responding. They were asked to identify
which of their registrations they wished
to maintain in effect, and to calculate
E:\FR\FM\13NON1.SGM
13NON1
]]>Agencies
[Federal Register Volume 80, Number 219 (Friday, November 13, 2015)]
[Notices]
[Pages 70201-70206]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2015-28842]
-----------------------------------------------------------------------
ENVIRONMENTAL PROTECTION AGENCY
[EPA-HQ-OPPT-2015-0504; FRL-9936-40]
Certain New Chemicals; Receipt and Status Information for
September 2015
AGENCY: Environmental Protection Agency (EPA).
ACTION: Notice.
-----------------------------------------------------------------------
SUMMARY: EPA is required under the Toxic Substances Control Act (TSCA)
to publish in the Federal Register a notice of receipt of a
premanufacture notice (PMN); an application for a test marketing
exemption (TME), both pending and/or expired; and a periodic status
report on any new chemicals under EPA review and the receipt of notices
of commencement (NOC) to manufacture those chemicals. This document
covers the period from September 1, 2015 to September 30, 2015.
DATES: Comments identified by the specific case number provided in this
document, must be received on or before December 14, 2015.
ADDRESSES: Submit your comments, identified by docket identification
(ID) number EPA-HQ-OPPT-2015-0504, and the specific PMN number or TME
number for the chemical related to your comment, by one of the
following methods:
Federal eRulemaking Portal: https://www.regulations.gov.
Follow the online instructions for submitting comments. Do not submit
electronically any information you consider to be Confidential Business
Information (CBI) or other information whose disclosure is restricted
by statute.
Mail: Document Control Office (7407M), Office of Pollution
Prevention and Toxics (OPPT), Environmental Protection Agency, 1200
Pennsylvania Ave. NW., Washington, DC 20460-0001.
Hand Delivery: To make special arrangements for hand
delivery or delivery of boxed information, please follow the
instructions at https://www.epa.gov/dockets/contacts.html.
Additional instructions on commenting or visiting the docket, along
with more information about dockets generally, is available at https://www.epa.gov/dockets.
FOR FURTHER INFORMATION CONTACT: For technical information contact: Jim
Rahai, IMD 7407M, Office of Pollution Prevention and Toxics,
Environmental Protection Agency, 1200 Pennsylvania Ave. NW.,
Washington, DC 20460-0001; telephone number: (202) 564-8593; email
address: rahai.jim@epa.gov.
For general information contact: The TSCA-Hotline, ABVI-Goodwill,
422 South Clinton Ave. Rochester, NY 14620; telephone number: (202)
554-1404; email address: TSCA-Hotline@epa.gov.
SUPPLEMENTARY INFORMATION:
I. General Information
A. Does this action apply to me?
This action is directed to the public in general. As such, the
Agency has not attempted to describe the specific entities that this
action may apply. Although others may be affected, this action applies
directly to the submitters of the actions addressed in this document.
B. What should I consider as I prepare my comments for EPA?
1. Submitting CBI. Do not submit this information to EPA through
regulations.gov or email. Clearly mark the part or all of the
information that you claim to be CBI. For CBI information in a disk or
CD-ROM that you mail to EPA, mark the outside of the disk or CD-ROM as
CBI and then identify electronically within the disk or CD-ROM the
specific information that is claimed as CBI. In addition to one
complete version of the comment that includes information claimed as
CBI, a copy of the comment that does not contain the information
claimed as CBI must be submitted for inclusion in the public docket.
Information so marked will not be disclosed except in accordance with
procedures set forth in 40 CFR part 2.
2. Tips for preparing your comments. When preparing and submitting
your comments, see the commenting tips at https://www.epa.gov/dockets/comments.html.
II. What action is the agency taking?
This document provides receipt and status reports, which cover the
period from September 1, 2015 to September 30, 2015, and consists of
the PMNs and TMEs both pending and/or expired, and the NOCs to
manufacture a new chemical that the Agency has received under TSCA
section 5 during this time period.
III. What is the agency's authority for taking this action?
Under TSCA, 15 U.S.C. 2601 et seq., EPA classifies a chemical
substance as either an ``existing'' chemical or a ``new'' chemical. Any
chemical substance that is not on EPA's TSCA Inventory is classified as
a ``new chemical,'' while those that are on the TSCA Inventory are
classified as an ``existing chemical.'' For more information about the
TSCA Inventory go to: https://www.epa.gov/opptintr/newchems/pubs/inventory.htm.
Anyone who plans to manufacture or import a new chemical substance
for a non-exempt commercial purpose is required by TSCA section 5 to
provide EPA with a PMN, before initiating the activity. Section 5(h)(1)
of TSCA authorizes EPA to allow persons, upon application, to
manufacture (includes import) or process a new chemical substance, or a
chemical substance subject to a significant new use rule (SNUR) issued
under TSCA section 5(a), for ``test marketing'' purposes, which is
referred to as a test marketing exemption, or TME. For more
[[Page 70202]]
information about the requirements applicable to a new chemical go to:
https://www.epa.gov/oppt/newchems.
Under TSCA sections 5(d)(2) and 5(d)(3), EPA is required to publish
in the Federal Register a notice of receipt of a PMN or an application
for a TME and to publish in the Federal Register periodic reports on
the status of new chemicals under review and the receipt of NOCs to
manufacture those chemicals.
IV. Receipt and Status Reports
As used in each of the tables in this unit, (S) indicates that the
information in the table is the specific information provided by the
submitter, and (G) indicates that the information in the table is
generic information because the specific information provided by the
submitter was claimed as CBI.
For the 55 PMNs received by EPA during this period, Table 1
provides the following information (to the extent that such information
is not claimed as CBI): The EPA case number assigned to the PMN; The
date the PMN was received by EPA; the projected end date for EPA's
review of the PMN; the submitting manufacturer/importer; the potential
uses identified by the manufacturer/importer in the PMN; and the
chemical identity.
Table 1--PMNs Received From September 1, 2015 to September 30, 2015
--------------------------------------------------------------------------------------------------------------------------------------------------------
Projected end
Case No. Date received date for EPA Manufacturer/ importer Use(s) Chemical identity
review
--------------------------------------------------------------------------------------------------------------------------------------------------------
P-15-0703............................ 8/26/2015 11/24/2015 CBI..................... (G) Additive in toner... (G) Alkyl alkenoic acid,
substituted alkyl ester,
polymer with alkyl alkenoate
and substituted alkyl
alkenoate compd. with alkyl
alkyl carbomonocyclic salt.
P-15-0713............................ 9/1/2015 11/30/2015 CBI..................... (G) Contained use....... (G) Cellulose, polymer with
substituted oxirane, 2-
(diethylamino) ethyl ether.
P-15-0714............................ 9/1/2015 11/30/2015 Kemira.................. (G) Paper strength (G) Modified polyacrylamide.
additive.
P-15-0715............................ 9/3/2015 12/2/2015 CBI..................... (G) Additive for inks... (G) Oxirane, 2-ethyl-,
homopolymer, 3-(5-carboxy-
1,3-dihydro-,1,3-dioxo-2H-
isoindol-2-yl) alkyl ethers.
P-15-0717............................ 9/3/2015 12/2/2015 CBI..................... (G) Adhesive additive... (G) Triethoxysilylalkoxy
polyalkylene glycol
urethane.
P-15-0718............................ 9/3/2015 12/2/2015 CBI..................... (G) Adhesive additive... (G) Triethoxysilylalkoxy
polyalkylene glycol
urethane.
P-15-0719............................ 9/3/2015 12/2/2015 CBI..................... (G) Flame retardant (S) Poly (1,4-diisopropyl
synergist. benzene).
P-15-0720............................ 9/4/2015 12/3/2015 CBI..................... (S) Polyurethane (G) Aliphatic polyester
prepolymer. polyol.
P-15-0721............................ 9/4/2015 12/3/2015 CBI..................... (S) Polyurethane (G) Aliphatic polyester
prepolymer. polyol.
P-15-0722............................ 9/4/2015 12/3/2015 CBI..................... (S) Polyurethane (G) Aliphatic polyester
prepolymer. polyol.
P-15-0723............................ 9/4/2015 12/3/2015 CBI..................... (S) Polyurethane (G) Aliphatic polyester
prepolymer. polyol.
P-15-0724............................ 9/4/2015 12/3/2015 CBI..................... (S) Polyurethane (G) Aliphatic polyester
prepolymer. polyol.
P-15-0725............................ 9/4/2015 12/3/2015 CBI..................... (S) Polyurethane (G) Aliphatic polyester
prepolymer. polyol.
P-15-0726............................ 9/4/2015 12/3/2015 CBI..................... (S) Co-polymer for use (G) Triethoxysilylalkoxy
in adhesives and polyalkylene glycol.
sealant formulations.
P-15-0728............................ 9/9/2015 12/8/2015 TAKASAGO................ (S) Fragrance in (S) Benzenemethanol, 3-ethoxy-
household products. 4-hydroxy-.
P-15-0728............................ 9/9/2015 12/8/2015 TAKASAGO................ (S) Fragrance in a fine (S) Benzenemethanol, 3-ethoxy-
fragrance. 4-hydroxy-.
P-15-0728............................ 9/9/2015 12/8/2015 TAKASAGO................ (S) Fragrance in (S) Benzenemethanol, 3-ethoxy-
consumer products. 4-hydroxy-.
P-15-0728............................ 9/9/2015 12/8/2015 TAKASAGO................ (S) Fragrance in other (S) Benzenemethanol, 3-ethoxy-
products. 4-hydroxy-.
P-15-0730............................ 9/10/2015 12/9/2015 CBI..................... (G) Additive for paper (G) Amphoteric
and paperboard. polyacrylamide.
P-15-0731............................ 9/10/2015 12/9/2015 CBI..................... (G) Additive for paper (G) Amphoteric
and paperboard. polyacrylamide.
P-15-0733............................ 9/10/2015 12/9/2015 Cadence Chemical (S) Coating for glass... (G) Alkane carboxylic acid,
Corporation. hydroxy, hydroxyalkyl-alkyl,
polymer with .alpha.-hydro-
.omega.-hydroxypoly(oxy-1,2-
ethanediyl) ether with alkyl-
(hydroxyalkyl)-alkanediol
(X:1), .alpha.-hydro-.omega.-
hydroxypoly[oxy(alkyl-
alkyldiyl)] and alkylenebis
[isocyanatoalkane],-blocked.
P-15-0734............................ 9/11/2015 12/10/2015 CBI..................... (S) Wastewater Heavy (G) Polymeric Sulfide.
Metals Removal.
[[Page 70203]]
P-15-0735............................ 9/15/2015 12/14/2015 Cray Valley USA, LLC.... (S) Adhesive Formulation (S) Hydrocarbons, C5-rich,
polymers with (6E)-7, 11-
dimethyl-3-methylene-1,6,10-
dodecatriene, 2-methylbutene
and methylstyrene.
P-15-0735............................ 9/15/2015 12/14/2015 Cray Valley USA, LLC.... (S) Rubber Formulation.. (S) Hydrocarbons, C5-rich,
polymers with (6E)-7, 11-
dimethyl-3-methylene-1,6,10-
dodecatriene, 2-methylbutene
and methylstyrene.
P-15-0736............................ 9/18/2015 12/17/2015 CBI..................... (S) Industrial coating (G) Castor oil, polymer with
resin for wood substituted alkanoic acid,
substances. substituted carbomonocycle,
dialkyl substituted
alkanediol and TDI,
substituted alkanone-
blocked.
P-15-0737............................ 9/16/2015 12/15/2015 CBI..................... (G) Intermediate........ (G) Ammonium salts of
phosphate methacrylate.
P-15-0738............................ 9/17/2015 12/16/2015 CBI..................... (S) Injection molding (G) Polysiloxane-
additive to improve the polycarbonate copolymer.
physical properties of
plastic parts.
P-15-0739............................ 9/17/2015 12/16/2015 CBI..................... (S) Component of (G) Epoxy Terminated Polymer.
Flexible Foam.
P-15-0740............................ 9/17/2015 12/16/2015 Allnex USA, Inc......... (S) Digital printing (G) Disubstituted alkanedioic
applications. acid, polymer with
substituted carbomonocycle,
dialkyl carbonate,
alkanediol and (alkylimino)
bis [alkanol], acetate
(salt).
P-15-0741............................ 9/17/2015 12/16/2015 CBI..................... (S) Mixture of modified (G) Mixture of Modified
urethane polymers used urethane polymers.
as a deflocculating and
dispersing additive in
industrial coatings.
P-15-0742............................ 9/17/2015 12/16/2015 CBI..................... (G) Component for tire.. (G) Modified Copolymer of
Buta-1,3-diene and Styrene.
P-15-0743............................ 9/17/2015 12/16/2015 Eden Innovations........ (G) The liquid solution (G) Nano particle liquid
is an admixture that is concrete admixture.
used by the concrete
industry to enhance
product performance. It
is mainly used to
increase the concrete's
abrasion resistance,
and increase the
compressive and split
tensile strengths; see
internal comments.
P-15-0744............................ 9/18/2015 12/17/2015 3 M Company............. (G) Construction (G) Naturally-occurring
material. minerals, reaction products
with boron sodium oxide
(b4na2o7), hetero
substituted alkyl acrylate
polymer, kaolin and sodium
silicate.
P-15-0745............................ 9/18/2015 12/17/2015 3 M Company............. (G) Construction (G) Naturally-occurring
material. minerals, reaction products
with boron sodium oxide
(b4na2o7), hetero
substituted alkyl acrylate
polymer, kaolin and sodium
silicate.
P-15-0746............................ 9/18/2015 12/17/2015 3 M Company............. (G) Construction (G) Naturally-occurring
material. minerals, reaction products
with boron sodium oxide
(b4na2o7), hetero
substituted alkyl acrylate
polymer, kaolin and sodium
silicate.
P-15-0747............................ 9/18/2015 12/17/2015 3 M Company............. (G) Construction (G) Naturally-occurring
material. minerals, reaction products
with boron sodium oxide
(b4na2o7), hetero
substituted alkyl acrylate
polymer, kaolin and sodium
silicate.
P-15-0748............................ 9/18/2015 12/17/2015 3 M Company............. (G) Construction (G) Naturally-occurring
material. minerals, reaction products
with hetero substituted
alkyl acrylate polymer,
kaolin and sodium silicate.
[[Page 70204]]
P-15-0749............................ 9/18/2015 12/17/2015 3 M Company............. (G) Construction (G) Naturally-occurring
material. minerals, reaction products
with hetero substituted
alkyl acrylate polymer,
kaolin and sodium silicate.
P-15-0750............................ 9/18/2015 12/17/2015 3 M Company............. (G) Construction (G) Naturally-occurring
material. minerals, reaction products
with hetero substituted
alkyl acrylate polymer,
kaolin and sodium silicate.
P-15-0751............................ 9/18/2015 12/17/2015 3 M Company............. (G) Construction (G) Naturally-occurring
material. minerals, reaction products
with hetero substituted
alkyl acrylate polymer,
kaolin and sodium silicate.
P-15-0752............................ 9/22/2015 12/21/2015 CBI..................... (G) Additive, open, non- (G) Polysiloxane, di-Me,
dispersive use. epoxyfunctional.
P-15-0753............................ 9/22/2015 12/21/2015 CBI..................... (G) Additive, open, non- (G) Polyester amine adduct.
dispersive use.
P-15-0754............................ 9/22/2015 12/21/2015 CBI..................... (G) Additive, open, non- (G) Polyester amine adduct.
dispersive use.
P-15-0755............................ 9/22/2015 12/21/2015 CBI..................... (G) Additive, open, non- (G) Polyester amine adduct.
dispersive use.
P-15-0759............................ 9/24/2015 12/23/2015 CBI..................... (G) Polyurethane (G) Isocyanate-terminated
prepolymer for use in urethane prepolymer.
cast polyurethane
elastomer parts: Open,
non-dispersive use.
P-15-0760............................ 9/24/2015 12/23/2015 CBI..................... (G) Polyurethane (G) Isocyanate-terminated
prepolymer for use in urethane prepolymer.
cast polyurethane
elastomer parts: Open,
non-dispersive use.
P-15-0761............................ 9/24/2015 12/23/2015 CBI..................... (G) Polyurethane (G) Isocyanate-terminated
prepolymer for use in polyester-based urethane
cast polyurethane prepolymer.
elastomer parts: Open,
non-dispersive use.
P-15-0762............................ 9/24/2015 12/23/2015 CBI..................... (G) Polyurethane (G) Isocyanate-terminated
prepolymer for use in polyester-based urethane
cast polyurethane prepolymer.
elastomer parts: Open,
non-dispersive use.
P-15-0763............................ 9/24/2015 12/23/2015 CBI..................... (G) Polyurethane (G) Isocyanate-terminated
prepolymer for use in polyester-based urethane
cast polyurethane prepolymer.
elastomer parts: Open,
non-dispersive use.
P-15-0764............................ 9/24/2015 12/23/2015 CBI..................... (G) Polyurethane (G) Isocyanate-terminated
prepolymer for use in polybutadiene-based urethane
cast polyurethane polymer.
elastomer parts: Open,
non-dispersive use.
P-15-0765............................ 9/25/2015 12/24/2015 ANGUS Chemical Company.. (G) Chemical Absorbant.. (G) Tertiary Amino Polyol.
P-15-0766............................ 9/28/2015 12/27/2015 Reichhold............... (S) Resin for flame (G) Halogenated epoxy polymer
retardant polyesters. with alkeneoic acid.
P-15-0767............................ 9/29/2015 12/28/2015 Reichhold............... (S) Resin used for flame (G) Halogenated bisphenol a,
retardant polyester polymer with epoxy resin and
applications. phenolic epoxy, alkeneoic
acids.
P-15-0768............................ 9/29/2015 12/28/2015 Allnex USA, Inc......... (S) Crosslinker in the (G) Alkanedial, polymer with
construction of an in- alkyleneurea and alkyl-
site encapsulation alkanediol.
product.
P-15-0769............................ 9/30/2015 12/29/2015 LUNA, Inc............... (S) Component of (G) Polyurethane Silane.
protective coating.
--------------------------------------------------------------------------------------------------------------------------------------------------------
For the one TME received by EPA during this period, Table 2
provides the following information (to the extent that such information
is not claimed as CBI): The EPA case number assigned to the TME, the
date the TME was received by EPA, the projected end date for EPA's
review of the TME, the submitting manufacturer/importer, the potential
uses identified by the manufacturer/importer in the TME, and the
chemical identity.
[[Page 70205]]
Table 2--TME Received From September 1, 2015 to September 30, 2015
--------------------------------------------------------------------------------------------------------------------------------------------------------
Projected end
Case No. Date received date for EPA Manufacturer/ importer Use Chemical identity
review
--------------------------------------------------------------------------------------------------------------------------------------------------------
T-15-0017............................ 9/21/2015 11/5/2015 NON-CBI................. Resin for coating (S) EHTM.
formulation.
--------------------------------------------------------------------------------------------------------------------------------------------------------
For the 25 NOCs received by EPA during this period, Table 3
provides the following information (to the extent that such information
is not claimed as CBI): The EPA case number assigned to the NOC; the
date the NOC was received by EPA; the projected date of commencement
provided by the submitter in the NOC; and the chemical identity.
Table 3--NOCs Received From September 1, 2015 to September 30, 2015
----------------------------------------------------------------------------------------------------------------
Projected date
Case No. Received date of Chemical identity
commencement
----------------------------------------------------------------------------------------------------------------
J-15-0017.............................. 9/11/2015 8/14/2015 (G) Modified organism.
P-12-0078.............................. 9/15/2015 8/26/2015 (S) 1-Octanesulfonic acid,
3,3,4,4,5,5,6,6,7,7,8,8,8-
tridecafluoro-, barium salt (2:1).
P-12-0437.............................. 9/3/2015 8/13/2015 (S) Quaternary ammonium compounds, bis
(hydrogenated tallow alkyl) dimethyl,
salts with tannins.
P-13-0246.............................. 9/9/2015 8/12/2015 (G) Cobalt based polymer with fatty
acids, and polyol.
P-13-0309.............................. 9/24/2015 9/15/2015 (S) Alcohols, c9-11-branched,
ethoxylated propoxylated.
P-14-0142.............................. 9/24/2015 9/22/2015 (G) Ethoxylated Resin.
P-14-0605.............................. 9/10/2015 9/10/2015 (G) Substituted cyclosiloxane.
P-14-0738.............................. 9/3/2015 8/31/2015 (G) Polyalkylene ether alkyl phosphate
polyurethane prepolymer.
P-14-0809.............................. 9/29/2015 9/2/2015 (G) Depolymerized waste plastics.
P-15-0036.............................. 9/1/2015 8/28/2015 (S) 2-Pyridinecarboxylic acid, 4,5,6-
trichloro-.
P-15-0152.............................. 9/24/2015 9/2/2015 (G) Urethane acrylate.
P-15-0308.............................. 9/14/2015 8/31/2015 (G) Dicarboxylic acid, cycloaliphatic
anhydride polymer with alkyldiol,
hydroxy-[(oxoalkyl)oxy]alkyl ester.
P-15-0311.............................. 9/18/2015 9/3/2015 (G) Triarylsulfonium salt with
haloalkyl phosphate.
P-15-0364.............................. 9/23/2015 9/13/2015 (G) Reaction mixture of copper,
[29h,31h-phthalocyaninato(2-)-
.kappa.n29,.kappa.n30,.kappa.n31,.kapp
a.n32]-, (sp-4-1)- and metal,
[substituted 29h,31h-phthalocyanine-
.kappa.n29,.kappa.n30,.kappa.n31,lkapp
a.n32]-.
P-15-0365.............................. 9/2/2015 8/21/2015 (G) Alkyl alkenoic acid polymers with
alkyl acrylate, alkyl methacrylate,
polyether methacrylate alkyl ethers
and substituted heteromonocycle,
compds. with substituted alkyl
alkanol.
P-15-0390.............................. 9/10/2015 9/3/2015 (G) Substituted carbopolycyclic
dicarboxylic acid dialkyl ester,
polymer with dialkyl carbopolycyclic
ester, alkanediol and carbopolycyclic
bis (substituted carbomonocycle).
P-15-0396.............................. 9/24/2015 9/4/2015 (G) Alkylmethacrylate, polymer with
alkenylbenzene, branched
alkylmethacrylate,
hydroxyalkylmethacrylate and acrylic
acid, t-butyl alkaneperoxoic acid
ester-initiated.
P-15-0410.............................. 9/18/2015 8/18/2015 (S) 1,3-Butadiene, homopolymer,
hydrogenated, 2-hydroxyethyl-
terminated, bis[n-[4-[(4-
isocyanatophenyl)methyl]phenyl]carbama
tes].
P-15-0411.............................. 9/7/2015 9/3/2015 (G) Fatty acid esters with polyols
polyalkyl ethers.
P-15-0427.............................. 9/24/2015 8/9/2015 (G) Substituted alkylene
carbomonocycle, homopolymer,
substituted polyol and mono alkyl
ether-blocked polyol.
P-15-0456.............................. 9/4/2015 8/21/2015 (G) Amine functional epoxy, organic
acid salt.
P-15-0466.............................. 9/16/2015 9/11/2015 (G) Acrylic acid polymer.
P-15-0467.............................. 9/18/2015 9/14/2015 (S) 2-Oxepanone, polymer with 5-amino-
1,3,3-trimethylcyclohexanemethanamine,
1,2-ethanediol and 5-isocyanato-1-
(isocyanatomethyl)-1,3,3-
trimethylcyclohexane.
P-15-0495.............................. 9/9/2015 8/30/2015 (G) Aromatic anhydride, polymer with
alkane diol and alkane triol, 2-
propenoate.
P-15-0497.............................. 9/9/2015 8/30/2015 (G) Bisphenol an epoxy polymer with
aromatic anhydride, mixed caprolactone
acrylate and hydroxyethyl acrylate
esters.
----------------------------------------------------------------------------------------------------------------
[[Page 70206]]
Authority: 15 U.S.C. 2601 et seq.
Dated: November 5, 2015.
Pamela Myrick,
Acting Director, Information Management Division, Office of Pollution
Prevention and Toxics.
[FR Doc. 2015-28842 Filed 11-12-15; 8:45 am]
BILLING CODE 6560-50-P
