Certain New Chemicals; Receipt and Status Information, 37248-37254 [2015-16047]

Download as PDF 37248 Federal Register / Vol. 80, No. 125 / Tuesday, June 30, 2015 / Notices ENVIRONMENTAL PROTECTION AGENCY [EPA–HQ–OECA–2014–0094; FRL–9929– 76–OEI] Information Collection Request Submitted to OMB for Review and Approval; Comment Request; NSPS for Other Solid Waste Incineration Units (Renewal) Environmental Protection Agency (EPA). ACTION: Notice. AGENCY: The Environmental Protection Agency has submitted an information collection request (ICR), ‘‘NSPS for Other Solid Waste Incineration Units (40 CFR part 60, subpart EEEE) (Renewal)’’ (EPA ICR No. 2163.05, OMB Control No. 2060–0563) to the Office of Management and Budget (OMB) for review and approval in accordance with the Paperwork Reduction Act (44 U.S.C. 3501 et seq.). This is a proposed extension of the ICR, which is currently approved through June 30, 2015. Public comments were previously requested via the Federal Register (79 FR 30117) on May 27, 2014 during a 60-day comment period. This notice allows for an additional 30 days for public comments. A fuller description of the ICR is given below, including its estimated burden and cost to the public. An Agency may not conduct or sponsor and a person is not required to respond to a collection of information unless it displays a currently valid OMB control number. DATES: Additional comments may be submitted on or before July 30, 2015. ADDRESSES: Submit your comments, referencing Docket ID Number EPA– HQ–OECA–2014–0094, to (1) EPA online using www.regulations.gov (our preferred method), by email to docket.oeca@epa.gov, or by mail to: EPA Docket Center, Environmental Protection Agency, Mail Code 28221T, 1200 Pennsylvania Ave. NW., Washington, DC 20460, and (2) OMB via email to oira_submission@omb.eop.gov. Address comments to OMB Desk Officer for EPA. EPA’s policy is that all comments received will be included in the public docket without change including any personal information provided, unless the comment includes profanity, threats, information claimed to be Confidential Business Information (CBI) or other information whose disclosure is restricted by statute. FOR FURTHER INFORMATION CONTACT: Patrick Yellin, Monitoring, Assistance, and Media Programs Division, Office of asabaliauskas on DSK5VPTVN1PROD with NOTICES SUMMARY: VerDate Sep<11>2014 17:34 Jun 29, 2015 Jkt 235001 Compliance, Mail Code 2227A, Environmental Protection Agency, 1200 Pennsylvania Ave. NW., Washington, DC 20460; telephone number: (202) 564–2970; fax number: (202) 564–0050; email address: yellin.patrick@epa.gov. SUPPLEMENTARY INFORMATION: Supporting documents which explain in detail the information that the EPA will be collecting are available in the public docket for this ICR. The docket can be viewed online at www.regulations.gov or in person at the EPA Docket Center, EPA West, Room 3334, 1301 Constitution Ave. NW., Washington, DC. The telephone number for the Docket Center is 202–566–1744. For additional information about EPA’s public docket, visit https://www.epa.gov/ dockets. Abstract: The NSPS applies to very small municipal waste combustion units and institutional waste incineration units that commenced construction after December 9, 2005 or commenced reconstruction or modification on or after June 16, 2006. In general, all NSPS standards require initial notifications, performance tests, and periodic reports by the owners/operators of the affected facilities. They are also required to maintain records of the occurrence and duration of any startup, shutdown, or malfunction in the operation of an affected facility, or any period during which the monitoring system is inoperative. These notifications, reports, and records are essential in determining compliance, and are required of all affected facilities subject to NSPS. Form Numbers: None. Respondents/affected entities: Owners and operators of other solid waste incinerator units. Respondent’s obligation to respond: Mandatory (40 CFR part 60, subpart EEEE) Estimated number of respondents: Zero (total). Frequency of response: Initially, semiannually and annually. Total estimated burden: Zero hours (per year). Burden is defined at 5 CFR 1320.3(b). Total estimated cost: $0 (per year), includes $0 annualized capital or operation & maintenance costs. Changes in the Estimates: There is no change in the labor hours or cost in this ICR compared to the previous ICR. At present, there are no OSWI units subject to the regulations, and no new units are expected to be constructed or operated over the next three years. It is assumed that potential respondents would use alternative methods of waste disposal that are more economical, e.g. landfills, rather than replacing existing OSWI PO 00000 Frm 00030 Fmt 4703 Sfmt 4703 units. As a result, no respondent or agency burdens or costs have been estimated, and no annual burden is expected. Courtney Kerwin, Acting Director, Collection Strategies Division. [FR Doc. 2015–16033 Filed 6–29–15; 8:45 am] BILLING CODE 6560–50–P ENVIRONMENTAL PROTECTION AGENCY [EPA–HQ–OPPT–2015–0185; FRL–9929–43] Certain New Chemicals; Receipt and Status Information Environmental Protection Agency (EPA). ACTION: Notice. AGENCY: EPA is required under the Toxic Substances Control Act (TSCA) to publish in the Federal Register a notice of receipt of a premanufacture notice (PMN); an application for a test marketing exemption (TME), both pending and/or expired; and a periodic status report on any new chemicals under EPA review and the receipt of notices of commencement (NOC) to manufacture those chemicals. This document covers the period from May 1, 2015 to May 29, 2015. DATES: Comments identified by the specific PMN number or TME number, must be received on or before July 30, 2015. ADDRESSES: Submit your comments, identified by docket identification (ID) number EPA–HQ–OPPT–2015–0183, and the specific PMN number or TME number for the chemical related to your comment, by one of the following methods: • Federal eRulemaking Portal: https:// www.regulations.gov. Follow the online instructions for submitting comments. Do not submit electronically any information you consider to be Confidential Business Information (CBI) or other information whose disclosure is restricted by statute. • Mail: Document Control Office (7407M), Office of Pollution Prevention and Toxics (OPPT), Environmental Protection Agency, 1200 Pennsylvania Ave. NW., Washington, DC 20460–0001. • Hand Delivery: To make special arrangements for hand delivery or delivery of boxed information, please follow the instructions at https:// www.epa.gov/dockets/contacts.html. Additional instructions on commenting or visiting the docket, along with more information about SUMMARY: E:\FR\FM\30JNN1.SGM 30JNN1 37249 Federal Register / Vol. 80, No. 125 / Tuesday, June 30, 2015 / Notices dockets generally, is available at https://www.epa.gov/dockets. FOR FURTHER INFORMATION CONTACT: For technical information contact: Jim Rahai, IMD (7407M), Office of Pollution Prevention and Toxics, Environmental Protection Agency, 1200 Pennsylvania Ave. NW., Washington, DC 20460–0001; telephone number: 202–564–8593; email address: rahai.jim@epa.gov. For general information contact: The TSCA-Hotline, ABVI-Goodwill, 422 South Clinton Ave., Rochester, NY 14620; telephone number: (202) 554– 1404; email address: TSCA-Hotline@ epa.gov. SUPPLEMENTARY INFORMATION: I. General Information A. Does this action apply to me? This action is directed to the public in general. As such, the Agency has not attempted to describe the specific entities that this action may apply. Although others may be affected, this action applies directly to the submitter of the PMNs addressed in this action. B. What should I consider as I prepare my comments for EPA? 1. Submitting CBI. Do not submit this information to EPA through regulations.gov or email. Clearly mark the part or all of the information that you claim to be CBI. For CBI information in a disk or CD–ROM that you mail to EPA, mark the outside of the disk or CD–ROM as CBI and then identify electronically within the disk or CD–ROM the specific information that is claimed as CBI. In addition to one complete version of the comment that includes information claimed as CBI, a copy of the comment that does not contain the information claimed as CBI must be submitted for inclusion in the public docket. Information so marked will not be disclosed except in accordance with procedures set forth in 40 CFR part 2. 2. Tips for preparing your comments. When preparing and submitting your comments, see the commenting tips at https://www.epa.gov/dockets/ comments.html. II. What action is the Agency taking? This document provides receipt and status reports, which cover the period from May 1, 2015 to May 29, 2015, and consists of the PMNs and TMEs both pending and/or expired, and the NOCs to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period. III. What is the Agency’s authority for taking this action? Section 5 of TSCA requires that EPA periodical publish in the Federal Register receipt and status reports, which cover the following EPA activities required by provisions of TSCA section 5. EPA classifies a chemical substance as either an ‘‘existing’’ chemical or a ‘‘new’’ chemical. Any chemical substance that is not on EPA’s TSCA Inventory is classified as a ‘‘new chemical,’’ while those that are on the TSCA Inventory are classified as an ‘‘existing chemical.’’ For more information about the TSCA Inventory go to: https://www.epa.gov/opptintr/ newchems/pubs/inventory.htm. Anyone who plans to manufacture or import a new chemical substance for a nonexempt commercial purpose is required by TSCA section 5 to provide EPA with a PMN, before initiating the activity. Section 5(h)(1) of TSCA authorizes EPA to allow persons, upon application, to manufacture (includes import) or process a new chemical substance, or a chemical substance subject to a significant new use rule (SNUR) issued under TSCA section 5(a), for ‘‘test marketing’’ purposes, which is referred to as a test marketing exemption, or TME. For more information about the requirements applicable to a new chemical go to: https://www.epa.gov/ oppt/newchems. Under TSCA sections 5(d)(2) and 5(d)(3), EPA is required to publish in the Federal Register a notice of receipt of a PMN or an application for a TME and to publish in the Federal Register periodic status reports on the new chemicals under review and the receipt of NOCs to manufacture those chemicals. IV. Receipt and Status Reports In Table I. of this unit, EPA provides the following information (to the extent that such information is not claimed as CBI) on the PMNs received by EPA during this period: The EPA case number assigned to the PMN, the date the PMN was received by EPA, the projected end date for EPA’s review of the PMN, the submitting manufacturer/ importer, the potential uses identified by the manufacturer/importer in the PMN, and the chemical identity. TABLE I–50 PMNS RECEIVED FROM MAY 1, 2015 TO MAY 29, 2015 Case No. Projected notice end date Received date Manufacturer importer Use Chemical (G) Modified fluoroalkyl acrylate copolymer. (G) trimethoxysilyl alkyl ester acrylate.. (G) Alkyl methacrylate polymer with styrene, amino acrylate and acrylic acid. (G) Lithium mixed metal oxide. (G) Castor oil, dehydrated, polymer with alkyldioic acid, polymer with alkyl diols, hydroxy (hydroxymethyl)alkylylpropanoic acid, methylenebis [isocyanatocycloalkane] and alkyl glycol. (G) Castor oil, dehydrated, polymer with alkyldioic acid, polymer with alkyl diols, hydroxy (hydroxymethyl)alkylylpropanoic acid, methylenebis [isocyanatocycloalkane] and alkyl glycol. 4/6/2015 7/5/2015 CBI ..................... (G) Industrial coating polymer ....... P–15–0448 ..... 5/1/2015 7/30/2015 CBI ..................... (G) Additive in toner formulations .. P–15–0449 ..... 5/4/2015 8/2/2015 CBI ..................... (G) Acrylic resin for waterborne exterior coatings. P–15–0450 ..... P–15–0451 ..... asabaliauskas on DSK5VPTVN1PROD with NOTICES P–15–0387 ..... 5/4/2015 5/5/2015 8/2/2015 8/3/2015 CBI ..................... Alberdingk Boley, Inc. (G) Mixed metal oxide for batteries (S) Wood coatings ......................... P–15–0451 ..... 5/5/2015 8/3/2015 Alberdingk Boley, Inc. (S) Plastic coatings ........................ VerDate Sep<11>2014 17:34 Jun 29, 2015 Jkt 235001 PO 00000 Frm 00031 Fmt 4703 Sfmt 4703 E:\FR\FM\30JNN1.SGM 30JNN1 37250 Federal Register / Vol. 80, No. 125 / Tuesday, June 30, 2015 / Notices TABLE I–50 PMNS RECEIVED FROM MAY 1, 2015 TO MAY 29, 2015—Continued Case No. Projected notice end date Received date Manufacturer importer Use Chemical (G) Castor oil, dehydrated, polymer with alkyldioic acid, polymer with alkyl diols, hydroxy (hydroxymethyl)alkylylpropanoic acid, ethylenebis [isocyanatocycloalkane] and alkyl glycol. (G) Castor oil dehydrated, polymer with di-alkyl carbonate, alkyl diamine, alkyl diol, dihydroxy alkyl carboxylic acid and methylenebis [isocyanatocycloalkane]-, compd. with trialkylamine. (G) Castor oil, dehydrated, polymer with alkyl diamine, dihydroxyalkyl carboxylic acid, aromatic azinetriamine, methylenebis[isocyanatocycloalkane]-,compds. with trialkylamine. (G) Castor oil, dehydrated, polymer with alkyldioic acid, alkyldiamine, alkyldiol, dihydroxyalkyl carboxylic acid, methylenebis[isocyanato cyclohexane], alkyl glycol, and polyethylene glycol bis (hydroxymethyl)alkyl Me ether, compd. with triakyl amine. (S) 1,4-Cyclohexanedicarboxylic acid, 1,4-dimethyl ester, polymer with 1,4-cyclohexanedimethanol. (G) Amine functional epoxy, organic acid salt. (G) Substituted Alkanoic acid, metal complex. (G) Siloxanes and Silicones, Me hydrogen, hydrolysis products with 1,1,3,3tetramethyldisiloxane, distn. residues. (G) Substituted alkanoic acid-, metal salt. (G) Siloxanes and Silicones, alkoxy Me, polymers with Me silsesquioxanes, alkoxy-terminated. 5/5/2015 8/3/2015 Alberdingk Boley, Inc. (S) Leather and textile impregnation. P–15–0452 ..... 5/5/2015 8/3/2015 Alberdingk Boley, Inc. (G) Wood coatings and plastic coatings leather textile impregnation. P–15–0453 ..... 5/5/2015 8/3/2015 Alberdingk Boley, Inc. (G) Wood coatings and plastic coatings leather textile impregnation. P–15–0454 ..... 5/5/2015 8/3/2015 Alberdingk Boley, Inc. (G) Wood coatings and plastic coatings leather textile impregnation. P–15–0455 ..... 5/5/2015 8/3/2015 CBI ..................... (G) Automotive parts ...................... P–15–0456 ..... 5/6/2015 8/4/2015 CBI ..................... (G) resin for use in electrocoats .... P–15–0457 ..... 5/6/2015 8/4/2015 Allnex USA, Inc P–15–0459 ..... 5/6/2015 8/4/2015 CBI ..................... (S) Coating resin additive-curing catalyst. (G) Site-limited intermediate .......... P–15–0460 ..... 5/7/2015 8/5/2015 Allnex USA, Inc P–15–0461 ..... 5/7/2015 8/5/2015 CBI ..................... P–15–0462 ..... 5/7/2015 8/5/2015 CBI ..................... P–15–0463 ..... 5/11/2015 8/9/2015 CBI ..................... (S) Coating resin additive-curing catalyst. (G) HAPS free, silicone based resin for the manufacture of ambient curing industrial coatings, such as anticorrosion coating for mufflers, ovens, chimneys, oven inserts, barbeques and electric and gas heaters as well as other large industrial objects and equipment. (S) Acrylic resin used in the manufacture of inks and coatings. (G) Foam component ..................... P–15–0464 ..... asabaliauskas on DSK5VPTVN1PROD with NOTICES P–15–0451 ..... 5/11/2015 8/9/2015 CBI ..................... (G) Foam component ..................... P–15–0465 ..... 5/12/2015 8/10/2015 3M Company ..... P–15–0466 ..... P–15–0467 ..... 5/12/2015 5/15/2015 8/10/2015 8/13/2015 CBI ..................... CBI ..................... P–15–0468 ..... 5/15/2015 8/13/2015 CBI ..................... (S) Reactive polymer in 2 part epoxy adhesive. (G) Intermediate ............................. (G) Binder resin for printing ink (Open non-disperse use ). (G) Printing ink additive ................. P–15–0469 ..... P–15–0470 ..... 5/15/2015 5/15/2015 8/13/2015 8/13/2015 CBI ..................... CBI ..................... (G) Surfactant ................................ (G) Intermediate ............................. VerDate Sep<11>2014 17:34 Jun 29, 2015 Jkt 235001 PO 00000 Frm 00032 Fmt 4703 Sfmt 4703 E:\FR\FM\30JNN1.SGM (G) Hexamethylene diisocyanate with caprolactone acrylate. (G) Bifunctional aromatic polyester polyol. (G) Polyfunctional aromatic polyester polyol. (G) Amine modified epoxy resin. (G) Acrylic acid polymer. (G) Polyester type urethane polymer. (G) Polycyclecarboxylic acid, hydroxy-(substituted phenyl) diazenyl, metal salt. (G) Algal oil betaine surfactant. (G) Algal oil amide. 30JNN1 37251 Federal Register / Vol. 80, No. 125 / Tuesday, June 30, 2015 / Notices TABLE I–50 PMNS RECEIVED FROM MAY 1, 2015 TO MAY 29, 2015—Continued Case No. Projected notice end date Received date Manufacturer importer Use Chemical (S) 2-Furancarboxylic acid, 5methyl-, ethyl ester. (S) 2-Furancarboxylic acid, 5methyl-, ethyl ester. (S) 2-Furancarboxylic acid, 5methyl-, methyl ester. (S) 2-Furancarboxylic acid, 5methyl-,1-methylethyl ester. (S) 2-Furancarboxylic acid, 5methyl-, tetradecyl ester. (S) 2-Furancarboxylic acid, 5methyl-, 2,2’-[ethanediylbis(oxy2,1-ethanediyl) ester. (S) 2-furancarboxylic acid, 5-methyl-, 2,2’-[oxybis(methyl-2,1ethanediyl)] ester. (G) Benzaldehyde, reaction products with polyalkylenepolyamines, hydrogenated, reaction products with alkyl ketone. (G) Phenol, alkyl derivs. (G) Alkyl phosphate ammonium salt. (G) Amino benzyl acrylic copolymer. (G) Bismuth Compound. (G) Multi-walled carbon nanotubes. 5/19/2015 8/17/2015 xF Technologies (S) Plasticizer ................................. P–15–0474 ..... 5/19/2015 8/17/2015 xF Technologies (S) Organic solvent ........................ P–15–0475 ..... 5/19/2015 8/17/2015 xF Technologies P–15–0476 ..... 5/19/2015 8/17/2015 xF Technologies P–15–0477 ..... 5/19/2015 8/17/2015 xF Technologies P–15–0478 ..... 5/19/2015 8/17/2015 xF Technologies (G) Renewable plasticizer. (G) Renewable plasticizer. (G) Renewable plasticizer. (G) Renewable plasticizer. P–15–0479 ..... 5/19/2015 8/17/2015 xF Technologies (G) Renewable organic solvent/ plasticizer. P–15–0481 ..... 5/19/2015 8/17/2015 CBI ..................... (S) Curing agent for epoxy coating systems. P–15–0482 ..... P–15–0483 ..... 5/20/2015 5/20/2015 8/18/2015 8/18/2015 CBI ..................... CBI ..................... P–15–0484 ..... 5/22/2015 8/20/2015 CBI ..................... (G) Lubricant additive .................... (G) Component in cleaning formulation. (G) Chemical intermediate ............. P–15–0485 ..... P–15–0487 ..... 5/22/2015 5/22/2015 8/20/2015 8/20/2015 P–15–0487 ..... 5/22/2015 8/20/2015 CBI ..................... Daewoo International USA Corp. Daewoo International USA Corp. P–15–0487 ..... 5/22/2015 8/20/2015 Daewoo International USA Corp. P–15–0487 ..... 5/22/2015 8/20/2015 Daewoo International USA Corp. P–15–0487 ..... 5/22/2015 8/20/2015 Daewoo International USA Corp. P–15–0487 ..... 5/22/2015 8/20/2015 Daewoo International USA Corp. P–15–0487 ..... asabaliauskas on DSK5VPTVN1PROD with NOTICES P–15–0474 ..... 5/22/2015 8/20/2015 P–15–0487 ..... 5/22/2015 8/20/2015 P–15–0487 ..... 5/22/2015 8/20/2015 Daewoo International USA Corp. Daewoo International USA Corp. Daewoo International USA Corp. P–15–0488 ..... 5/22/2015 8/20/2015 VerDate Sep<11>2014 17:34 Jun 29, 2015 Jkt 235001 PO 00000 Daewoo International USA Corp. Frm 00033 Fmt 4703 organic solvent/ organic solvent/ organic solvent/ organic solvent/ (G) Additive for Industrial Coatings (S) Use with materials to improve mechanical properties or electrical conductivities. (S) Additive for heat transfer and thermal emissions in electronic devices and materials; use as a semi-conductor, conductive, or resistive element in electronic circuitry and devices. (S) Use as an additive for electromagnetic interface (EMI) shielding in electronic devices; additive for electrodes in electronic materials and electronic devices. (S) Use as a catalyst support in chemical manufacturing; Coating additive to improve corrosion resistance or conductive properties. (S) Additive for fibers in structural and electrical applications; Additive for fibers in fabrics and textiles. (S) Use as a filter additive to remove nanoscale materials; use as a semi-conducting compounding additive for highvoltage cable; use as an additive for super-hydrophobicity. (S) Additive for weight reduction in materials. (S) Use as a heat-generating element in heating devices and materials. (S) Use as an additive for electrostatic discharge (ESD) in electronic devices, electronics, and materials. (G) Use as an additive for super— hydrophobcity. Sfmt 4703 E:\FR\FM\30JNN1.SGM (G) Multi-walled carbon nanotubes. (G) Multi-walled carbon nanotubes. (G) Multi-walled carbon nanotubes. (G) Multi-walled carbon nanotubes. (G) Multi-walled carbon nanotubes. (G) Multi-walled carbon nanotubes. (G) Multi-walled carbon nanotubes. (G) Multi-walled carbon nanotubes. (G) Multi-walled carbon nanotubes. 30JNN1 37252 Federal Register / Vol. 80, No. 125 / Tuesday, June 30, 2015 / Notices TABLE I–50 PMNS RECEIVED FROM MAY 1, 2015 TO MAY 29, 2015—Continued Case No. Projected notice end date Received date Manufacturer importer P–15–0489 ..... 5/22/2015 8/20/2015 P–15–0490 ..... 5/22/2015 8/20/2015 P–15–0491 ..... 5/22/2015 8/20/2015 In Table II. of this unit, EPA provides the following information (to the extent that such information is not claimed as CBI) on the TMEs received by EPA Daewoo International USA Corp. Daewoo International USA Corp. Daewoo International USA Corp. Use Chemical (G) Use as an additive for super— hydrophobcity. (G) Multi-walled carbon nanotubes. (S) Use as a heat-generating ment in heating devices and terials. (S) Use as a heat-generating ment in heating devices and terials. elema- (G) Multi-walled carbon nanotubes. elema- (G) Multi-walled carbon nanotubes during this period: The EPA case number assigned to the TME, the date the TME was received by EPA, the projected end date for EPA’s review of the TME, the submitting manufacturer/ importer, the potential uses identified by the manufacturer/importer in the TME, and the chemical identity. TABLE II—TMES RECEIVED FROM MAY 1, 2015 TO MAY 29, 2015 Case No. Projected notice end date Received date T–15–0009 ..... 5/20/2015 Manufacturer importer 7/4/2015 In Table III. of this unit, EPA provides the following information (to the extent that such information is not claimed as Use Chemical CBI ..................... (G) Component in cleaning formulation. (G) Alkyl phosphate ammonium salt. CBI) on the NOCs received by EPA during this period: The EPA case number assigned to the NOC, the date the NOC was received by EPA, the projected end date for EPA’s review of the NOC, and chemical identity. TABLE III—63 NOCS RECEIVED FROM MAY1, 2015 TO MAY 29, 2015 Received date Commencement notice end date ..... ..... ..... ..... 5/14/2015 5/12/2015 5/19/2015 5/11/2015 5/5/2015 5/7/2015 5/11/2015 4/30/2015 P–14–0100 ..... P–14–0110 ..... 5/19/2015 5/10/2015 5/13/2015 4/30/2015 P–14–0410 ..... 5/12/2015 4/16/2015 P–14–0425 ..... P–14–0662 ..... 5/12/2015 5/12/2015 4/13/2015 5/10/2015 P–14–0724 ..... 5/12/2015 5/9/2015 P–14–0726 ..... 5/27/2015 5/23/2015 P–14–0749 ..... 5/22/2015 5/14/2015 ..... ..... ..... ..... 5/4/2015 5/5/2015 5/5/2015 5/8/2015 4/28/2015 4/9/2015 4/9/2015 4/29/2015 P–15–0059 ..... 5/29/2015 5/6/2015 P–15–0060 ..... 5/29/2015 5/6/2015 P–15–0104 ..... P–15–0129 ..... 5/29/2015 5/12/2015 5/6/2015 4/13/2015 Case No. asabaliauskas on DSK5VPTVN1PROD with NOTICES P–12–0425 P–13–0036 P–13–0690 P–13–0860 P–14–0824 P–14–0844 P–14–0845 P–14–0846 VerDate Sep<11>2014 17:34 Jun 29, 2015 Jkt 235001 PO 00000 Chemical (S) Methanol, reaction products with 1,1,1,2,2,3,4,5,5,6,6,7,7,7-tetradecafluoro-3-heptene.* (G) Polymer of epoxy and aliphatic and aromatic acids. (G) Aluminum phosphate. (G) Alkanedicarboxylic acid, polymer with alkanediamine, alkanediol, hydroxy(hydroxymethyl)-alkanecarboxylic acid and methylenebis[isocyanatocycloalkane] compd. with (dialkylamino)alkanol. (G) Polymerized fatty acid esters with aminoalcohol alkoxylates. (S) Cashew, nutshell liquid, polymer with formaldehyde, reaction products with diethanolamine and diisopropanolamine.* (G) Fatty acids, c18-unsatd., dimers, polymers with ammonia-ethanolamine reaction byproducts. (G) Fatty acids, c18-unsatd., dimers, polymers with cashew nutshell liquid, glycidyl ethers. (S) D-Glucopyranose, oliogmeric, c-10-16-alkyl glycosides, polymers with epichlorohydrin, and oligomeric d-glucopyranose decyl octyl glycosides.* (S) D-glucopyranose, oligomeric, decyl, octyl glycosides, polymers with epichlorohydrin, 3(dodecyldimethylammonio)-2-hydroxypropyl ethers, chloride.* (S) D-Glucopyranose, oligomeric, decyl octyl glycosides, polymers with epichlorohydrin, 3(dimethyloctadecylammonio)-2-hydroxylpropyl ethers, chlorides.* (G) Substituted alkanoic acid, polymer with substituted alkanediol, polyalkylene polyol and substituted carbomonocycle, alkali metal salt. (G) Rape oil, reaction products with alkylamine. (G) Organosilane treated boron nitride. (G) Organosilane treated oxide ceramic. (G) Alkanoic acid, hydroxy-(hydroxyalkyl)-methyl-, polymer with diisocyanatoalkane, -hydro—hydroxypoly(oxy-alkanediyl) and isocyanato-1-(isocyanatoalkyl)trimethylcycloalkane, tetrahydroxyalkanel triacrylate-blocked, compd. with trimethylamine. (S) Siloxanes and silicones, 3-[(2-aminoethyl)amino)propyl me, di-me, reaction products with cadmium zinc selenide sulfide, lauric acid and oleylamine.* (S) Dodecanoic acid, reaction products with cadmium zinc selenide sulfide and oleylamine.* (S) Phosphonic acid, p-tetradecyl-, reaction products with cadmium selenide (cdse).* (G) Ethoxylated alkyl chloroformate. Frm 00034 Fmt 4703 Sfmt 4703 E:\FR\FM\30JNN1.SGM 30JNN1 Federal Register / Vol. 80, No. 125 / Tuesday, June 30, 2015 / Notices 37253 TABLE III—63 NOCS RECEIVED FROM MAY1, 2015 TO MAY 29, 2015—Continued Received date Commencement notice end date P–15–0130 ..... P–15–0163 ..... 5/13/2015 5/27/2015 4/16/2015 5/22/2015 P–15–0168 ..... P–15–0188 ..... 5/27/2015 5/8/2015 5/20/2015 5/7/2015 P–15–0194 ..... 5/5/2015 4/27/2015 P–15–0195 ..... 5/12/2015 4/27/2015 P–15–0196 ..... 5/12/2015 4/27/2015 P–15–0197 ..... 5/12/2015 4/27/2015 P–15–0198 ..... 5/12/2015 4/26/2015 P–15–0199 ..... P–15–0200 ..... 5/8/2015 5/12/2015 4/24/2015 4/27/2015 P–15–0205 ..... 5/12/2015 4/26/2015 P–15–0206 ..... 5/12/2015 4/26/2015 P–15–0207 ..... P–15–0209 ..... P–15–0210 ..... 5/12/2015 5/12/2015 5/12/2015 4/26/2015 4/26/2015 4/26/2015 P–15–0211 ..... 5/12/2015 4/26/2015 P–15–0212 ..... 5/12/2015 4/26/2015 P–15–0213 ..... 5/12/2015 4/27/2015 P–15–0214 ..... 5/12/2015 4/26/2015 P–15–0215 ..... P–15–0216 ..... 5/12/2015 5/12/2015 4/26/2015 4/26/2015 P–15–0217 ..... 5/12/2015 4/26/2015 P–15–0218 ..... P–15–0219 ..... 5/5/2015 5/12/2015 4/26/2015 4/26/2015 P–15–0222 ..... 5/5/2015 4/27/2015 P–15–0223 ..... 5/5/2015 4/27/2015 P–15–0224 ..... 5/12/2015 4/27/2015 P–15–0225 ..... 5/12/2015 4/26/2015 P–15–0226 ..... 5/12/2015 4/26/2015 P–15–0227 ..... 5/5/2015 4/27/2015 P–15–0229 ..... 5/5/2015 4/26/2015 P–15–0231 ..... 5/12/2015 4/26/2015 P–15–0233 ..... 5/12/2015 4/26/2015 P–15–0234 ..... 5/12/2015 4/26/2015 P–15–0235 ..... 5/12/2015 4/26/2015 P–15–0236 ..... 5/29/2015 4/29/2015 P–15–0237 ..... 5/12/2015 4/26/2015 asabaliauskas on DSK5VPTVN1PROD with NOTICES Case No. VerDate Sep<11>2014 17:34 Jun 29, 2015 Jkt 235001 PO 00000 Chemical (G) Ethoxylated alkyl chloride. (G) Carboxypolyalkylene resin,oxidized, polymer with alkenoic acid, alkyl alkenoate, alkenedioic acid, polyalkylene glycol substituted dicarbomonocycle, substituted carbomonocycle, carbomonocyclic icarboxylic acid and anhydride, alkyl peroxide-initiated. (S) 2-Heptanol, 3,6-dimethyl-.* (G) Carbomoncycles, polymer with substituted heteromonocycle, 2- (2-alkyl-1-oxo-2-alkenyl) oxy] alkyl hydrogen alkanedioate. (G) Methacryloxyalkyl trialkoxysilane, reaction products with alkyl trialkoxysilane, epoxy modified alkoxy alkyl trialkoxysilane and mixed metal oxides. (G) Methacryloxyalkyl trialkoxysilane, reaction products with alkyl trialkoxysilane, epoxy modified alkoxy alkyl trialkoxysilane and mixed metal oxides. (G) Methacryloxyalkyl trialkoxysilane, reaction products with alkyl trialkoxysilane, epoxy modified alkoxy alkyl trialkoxysilane and mixed metal oxides. (G) Methacryloxyalkyl trialkoxysilane, reaction products with alkyl trialkoxysilane, epoxy modified alkoxy alkyl trialkoxysilane and mixed metal oxides. (G) Methacryloxyalkyl trialkoxysilane, reaction products with alkyl trialkoxysilane, epoxy modified alkoxy alkyl trialkoxysilane and mixed metal oxides. (G) Metallic salt of dicarboxylic acid. (G) Isocyanated alkyl trialkoxysilane, reaction products with epoxy modified cyclohexyl trialkoxysilane, alkylamine trialkoxysilane and mixed metal oxides. (G) Alkyldiamine alkyl trialkoxysilane, reaction products with methacrylate alkyl trialkoxysilane and mixed metal oxides. (G) Alkyldiamine alkyl trialkoxysilane, reaction products with methacrylate alkyl trialkoxysilane and mixed metal oxides. (G) Methacrylate alkyl trialkoxysilane, reaction products with metal oxides. (G) Epoxy modified alkoxy alkyl trialkoxysilane, reaction products with mixed metal oxides. (G) Alkyldiamine alkyl trialkoxysilane, reaction products with methacrylate alkyl trialkoxysilane and mixed metal oxides. (G) Methacryloxyalkyl trialkoxysilane, reaction products with alkyl trialkoxysilane, epoxy modified alkoxy alkyl trialkoxysilane and mixed metal oxides. (G) Isocyanated alkyl trialkoxysilane, reaction products with epoxy modified cyclohexyl trialkoxysilane, and mixed metal oxides. (G) Alkyl trialkoxysilane, reaction products with epoxy modified alkoxy alkyl trialkoxysilane, methacrylate alkyl trialkoxysilane and mixed metal oxides. (G) Alkyldiamine alkyl trialkoxysilane, reaction products with methacrylate alkyl trialkoxysilane and mixed metal oxides. (G) Epoxy modified alkoxy alkyl trialkoxysilane, reaction products with mixed metal oxides. (G) Isocyanated alkyl trialkoxysilane, reaction products with epoxy modified cyclohexyl trialkoxysilane, alkylamine trialkosysilane and mixed metal oxides. (G) Isocyanated alkyl trialkoxysilane, reaction products with epoxy modified cyclohexyl trialkoxysilane, alkylamine trialkoxysilane and mixed metal oxides. (G) Epoxy modified alkoxy alkyl trialkoxysilane, reaction products with mixed metal oxides. (G) Isocyanated alkyl trialkoxysilane, reaction products with epoxy modified cyclohexyl trialkoxysilane, alkylamine trialkoxysilane and mixed metal oxides. (G) Alkyl trialkoxysilane, reaction products with epoxy modified alkoxy alkyl trialkoxysilane, methacrylate alkyl trialkoxysilane and mixed metal oxides. (G) Alkyl trialkoxysilane, reaction products with methacrylate alkyl trialkoxysilane, epoxy modified alkoxy alkyl trialkoxysilane and mixed metal oxides. (G) Alkyl trialkoxysilane, reaction products with epoxy modified alkoxy alkyl trialkoxysilane, methacrylate alkyl trialkoxysilane and mixed metal oxides. (G) Methacryloxyalkyl trialkoxysilane, reaction products with alkyl trialkoxysilane, epoxy modified alkoxy alkyl trialkoxysilane and mixed metal oxides. (G) Alkyl amine trialkoxysilane, reaction products with isocyanated alkyl trialkoxysilane, epoxy modified cyclohexyl trialkoxysilane, and mixed metal oxides. (G) Alkyl trialkoxysilane, reaction products with epoxy modified alkoxy alkyl trialkoxysilane, methacrylate alkyl trialkoxysilane and mixed metal oxides. (G) Isocyanated alkyl trialkoxysilane, reaction products with epoxy modified cyclohexyl trialkoxysilane and mixed metal oxides. (G) Alkyl trialkoxysilane, reaction products with epoxy modified alkoxy alkyl trialkoxysilane, methacrylate alkyl trialkoxysilane and mixed metal oxides. (G) Isocyanated alkyl trialkoxysilane, reaction products with epoxy modified cyclohexyl trialkoxysilane, and mixed metal oxides. (G) Isocyanated alkyl trialkoxysilane, reaction products with epoxy modified cyclohexyl trialkoxysilane, alkylamine trialkoxysilane and mixed metal oxides.* (G) Epoxy modified cyclohexyl trialkoxysilane, reaction products with isocyanated alkyl trialkoxysilane, glass and mixed oxides. (G) Alkyl amine trialkoxysilane, reaction products with isocyanated alkyl trialkoxysilane, epoxy modified cyclohexyl trialkoxysilane, and mixed metal oxides. (G) Methacrylate alkyl trialkoxysilane, reaction products with metal oxides. Frm 00035 Fmt 4703 Sfmt 4703 E:\FR\FM\30JNN1.SGM 30JNN1 37254 Federal Register / Vol. 80, No. 125 / Tuesday, June 30, 2015 / Notices TABLE III—63 NOCS RECEIVED FROM MAY1, 2015 TO MAY 29, 2015—Continued Received date Commencement notice end date P–15–0239 ..... 5/25/2015 4/26/2015 P–15–0242 ..... P–15–0264 ..... 5/7/2015 5/27/2015 5/6/2015 5/22/2015 P–15–0265 ..... 5/27/2015 5/22/2015 P–15–0268 ..... 5/6/2015 5/1/2015 Case No. If you are interested in information that is not included in these tables, you may contact EPA as described in Unit III to access additional non-CBI information that may be available. Authority: 15 U.S.C. 2601 et seq. Dated: June 24, 2015. Chandler Sirmons, Acting Director, Information Management Division, Office of Pollution Prevention and Toxics. [FR Doc. 2015–16047 Filed 6–29–15; 8:45 am] BILLING CODE 6560–50–P ENVIRONMENTAL PROTECTION AGENCY [EPA–HQ–OECA–2014–0044; FRL–9929– 78–OEI] Information Collection Request Submitted to OMB for Review and Approval; Comment Request; NESHAP for Coke Oven Batteries (Renewal) Environmental Protection Agency (EPA). ACTION: Notice. AGENCY: The Environmental Protection Agency has submitted an information collection request (ICR), ‘‘NESHAP for Coke Oven Batteries (40 CFR part 63, subpart L) (Renewal)’’ (EPA ICR No. 1362.10, OMB Control No. 2060–0253) to the Office of Management and Budget (OMB) for review and approval in accordance with the Paperwork Reduction Act (44 U.S.C. 3501 et seq.). This is a proposed extension of the ICR, which is currently approved through June 30, 2015. Public comments were previously requested via the Federal Register (79 FR 30117) on May 27, 2014 during a 60-day comment period. This notice allows for an additional 30 days for public comments. A fuller description of the ICR is given below, including its estimated burden and cost to the public. An Agency may not asabaliauskas on DSK5VPTVN1PROD with NOTICES SUMMARY: VerDate Sep<11>2014 17:34 Jun 29, 2015 Jkt 235001 Chemical (G) Siloxanes and silicones, amino alkyl substituted alkyl hydroxyl, hydroxyl fluorinated alkyl, ester salts, reaction products with mixed metal oxides. (G) Heteropolycyclic, polymer with alkanedioic acid, di-alkenoate. (G) Carabomonocyclic dicarboxylic acid, polymer with alkanedioic acids, alkanediol, substituted heterpolycycle, alkanedioic acid, alkanediol, substituted carbomonocycle, alkyl alkenoate, alkanediols and alkenoic acid, alkyl ester, alkanoate, alkyl peroxide-initiated. (G) Carbomonocyclic dicarboxylic acid, polymer with alkanedioic acids, alkanediol, substituted heteropolycycle, alkanedioic acid, alkanediol, substituted carbomonocycle, alkyl alkanoate, alkanedioic acid, alkanediols and alkanoic acid, alkyl ester, alkanoate, alkyl peroxide-initiated. (G) Alkyl alkenoic acid, polymer with substituted alkyl alkenoate and alkyl alkenoate, reaction products with polyalkylene glycol substituted alkyl ether. conduct or sponsor and a person is not required to respond to a collection of information unless it displays a currently valid OMB control number. DATES: Additional comments may be submitted on or before July 30, 2015. ADDRESSES: Submit your comments, referencing Docket ID Number EPA– HQ–OECA–2014–0044, to (1) EPA online using www.regulations.gov (our preferred method), by email to docket.oeca@epa.gov, or by mail to: EPA Docket Center, Environmental Protection Agency, Mail Code 28221T, 1200 Pennsylvania Ave. NW., Washington, DC 20460, and (2) OMB via email to oira_submission@omb.eop.gov. Address comments to OMB Desk Officer for EPA. EPA’s policy is that all comments received will be included in the public docket without change including any personal information provided, unless the comment includes profanity, threats, information claimed to be Confidential Business Information (CBI) or other information whose disclosure is restricted by statute. FOR FURTHER INFORMATION CONTACT: Patrick Yellin, Monitoring, Assistance, and Media Programs Division, Office of Compliance, Mail Code 2227A, Environmental Protection Agency, 1200 Pennsylvania Ave. NW., Washington, DC 20460; telephone number: (202) 564–2970; fax number: (202) 564–0050; email address: yellin.patrick@epa.gov. SUPPLEMENTARY INFORMATION: Supporting documents which explain in detail the information that the EPA will be collecting are available in the public docket for this ICR. The docket can be viewed online at www.regulations.gov or in person at the EPA Docket Center, EPA West, Room 3334, 1301 Constitution Ave. NW., Washington, DC. The telephone number for the Docket Center is 202–566–1744. For additional information about EPA’s PO 00000 Frm 00036 Fmt 4703 Sfmt 4703 public docket, visit https://www.epa.gov/ dockets. Abstract: These standards apply to all coke oven batteries, whether existing, new, reconstructed, rebuilt, or restarted. It also applies to all batteries using the conventional by-product recovery, the non-recovery process, or any new recovery process. The 2005 amendments establish more stringent requirements for the control of hazardous air pollutants from coke oven batteries that chose to comply with maximum achievable control technology (MACT) standards under the 1993 rule. In general, all NESHAP standards require initial notifications, performance tests, and periodic reports by the owners/operators of the affected facilities. They are also required to maintain records of the occurrence and duration of any startup, shutdown, or malfunction in the operation of an affected facility, or any period during which the monitoring system is inoperative. These notifications, reports, and records are essential in determining compliance, and are required of all affected facilities subject to NESHAP. Any owner/operator subject to the provisions of this part shall maintain a file of these measurements, and retain the file for at least five years following the date of such measurements, maintenance reports, and records. All reports are sent to the delegated state or local authority. In the event that there is no such delegated authority, the reports are sent directly to the United States Environmental Protection Agency (EPA) regional office. Form Numbers: None. Respondents/affected entities: Coke oven batteries. Respondent’s obligation to respond: Mandatory (40 CFR part 63, subpart L). Estimated number of respondents: 19 (total). Frequency of response: Initially, occasionally, and semiannually. E:\FR\FM\30JNN1.SGM 30JNN1

Agencies

ENVIRONMENTAL PROTECTION AGENCY

[Federal Register Volume 80, Number 125 (Tuesday, June 30, 2015)]
[Notices]
[Pages 37248-37254]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2015-16047]

-----------------------------------------------------------------------

ENVIRONMENTAL PROTECTION AGENCY

[EPA-HQ-OPPT-2015-0185; FRL-9929-43]

Certain New Chemicals; Receipt and Status Information

AGENCY: Environmental Protection Agency (EPA).

ACTION: Notice.

-----------------------------------------------------------------------

SUMMARY: EPA is required under the Toxic Substances Control Act (TSCA)
to publish in the Federal Register a notice of receipt of a
premanufacture notice (PMN); an application for a test marketing
exemption (TME), both pending and/or expired; and a periodic status
report on any new chemicals under EPA review and the receipt of notices
of commencement (NOC) to manufacture those chemicals. This document
covers the period from May 1, 2015 to May 29, 2015.

DATES: Comments identified by the specific PMN number or TME number,
must be received on or before July 30, 2015.

ADDRESSES: Submit your comments, identified by docket identification
(ID) number EPA-HQ-OPPT-2015-0183, and the specific PMN number or TME
number for the chemical related to your comment, by one of the
following methods:
Federal eRulemaking Portal: https://www.regulations.gov.
Follow the online instructions for submitting comments. Do not submit
electronically any information you consider to be Confidential Business
Information (CBI) or other information whose disclosure is restricted
by statute.
Mail: Document Control Office (7407M), Office of Pollution
Prevention and Toxics (OPPT), Environmental Protection Agency, 1200
Pennsylvania Ave. NW., Washington, DC 20460-0001.
Hand Delivery: To make special arrangements for hand
delivery or delivery of boxed information, please follow the
instructions at https://www.epa.gov/dockets/contacts.html.
Additional instructions on commenting or visiting the docket, along
with more information about

[[Page 37249]]

dockets generally, is available at https://www.epa.gov/dockets.

FOR FURTHER INFORMATION CONTACT:
For technical information contact: Jim Rahai, IMD (7407M), Office
of Pollution Prevention and Toxics, Environmental Protection Agency,
1200 Pennsylvania Ave. NW., Washington, DC 20460-0001; telephone
number: 202-564-8593; email address: rahai.jim@epa.gov.
For general information contact: The TSCA-Hotline, ABVI-Goodwill,
422 South Clinton Ave., Rochester, NY 14620; telephone number: (202)
554-1404; email address: TSCA-Hotline@epa.gov.

SUPPLEMENTARY INFORMATION:

I. General Information

A. Does this action apply to me?

This action is directed to the public in general. As such, the
Agency has not attempted to describe the specific entities that this
action may apply. Although others may be affected, this action applies
directly to the submitter of the PMNs addressed in this action.

B. What should I consider as I prepare my comments for EPA?

1. Submitting CBI. Do not submit this information to EPA through
regulations.gov or email. Clearly mark the part or all of the
information that you claim to be CBI. For CBI information in a disk or
CD-ROM that you mail to EPA, mark the outside of the disk or CD-ROM as
CBI and then identify electronically within the disk or CD-ROM the
specific information that is claimed as CBI. In addition to one
complete version of the comment that includes information claimed as
CBI, a copy of the comment that does not contain the information
claimed as CBI must be submitted for inclusion in the public docket.
Information so marked will not be disclosed except in accordance with
procedures set forth in 40 CFR part 2.
2. Tips for preparing your comments. When preparing and submitting
your comments, see the commenting tips at https://www.epa.gov/dockets/comments.html.

II. What action is the Agency taking?

This document provides receipt and status reports, which cover the
period from May 1, 2015 to May 29, 2015, and consists of the PMNs and
TMEs both pending and/or expired, and the NOCs to manufacture a new
chemical that the Agency has received under TSCA section 5 during this
time period.

III. What is the Agency's authority for taking this action?

Section 5 of TSCA requires that EPA periodical publish in the
Federal Register receipt and status reports, which cover the following
EPA activities required by provisions of TSCA section 5.
EPA classifies a chemical substance as either an ``existing''
chemical or a ``new'' chemical. Any chemical substance that is not on
EPA's TSCA Inventory is classified as a ``new chemical,'' while those
that are on the TSCA Inventory are classified as an ``existing
chemical.'' For more information about the TSCA Inventory go to: https://www.epa.gov/opptintr/newchems/pubs/inventory.htm. Anyone who plans to
manufacture or import a new chemical substance for a non-exempt
commercial purpose is required by TSCA section 5 to provide EPA with a
PMN, before initiating the activity. Section 5(h)(1) of TSCA authorizes
EPA to allow persons, upon application, to manufacture (includes
import) or process a new chemical substance, or a chemical substance
subject to a significant new use rule (SNUR) issued under TSCA section
5(a), for ``test marketing'' purposes, which is referred to as a test
marketing exemption, or TME. For more information about the
requirements applicable to a new chemical go to: https://www.epa.gov/oppt/newchems.
Under TSCA sections 5(d)(2) and 5(d)(3), EPA is required to publish
in the Federal Register a notice of receipt of a PMN or an application
for a TME and to publish in the Federal Register periodic status
reports on the new chemicals under review and the receipt of NOCs to
manufacture those chemicals.

IV. Receipt and Status Reports

In Table I. of this unit, EPA provides the following information
(to the extent that such information is not claimed as CBI) on the PMNs
received by EPA during this period: The EPA case number assigned to the
PMN, the date the PMN was received by EPA, the projected end date for
EPA's review of the PMN, the submitting manufacturer/importer, the
potential uses identified by the manufacturer/importer in the PMN, and
the chemical identity.

Table I-50 PMNs Received From May 1, 2015 to May 29, 2015
----------------------------------------------------------------------------------------------------------------
Projected
Case No. Received date notice end Manufacturer Use Chemical
date importer
----------------------------------------------------------------------------------------------------------------
P-15-0387.......... 4/6/2015 7/5/2015 CBI............ (G) Industrial (G) Modified
coating polymer. fluoroalkyl
acrylate copolymer.
P-15-0448.......... 5/1/2015 7/30/2015 CBI............ (G) Additive in (G) trimethoxysilyl
toner formulations. alkyl ester
acrylate..
P-15-0449.......... 5/4/2015 8/2/2015 CBI............ (G) Acrylic resin (G) Alkyl
for waterborne methacrylate
exterior coatings. polymer with
styrene, amino
acrylate and
acrylic acid.
P-15-0450.......... 5/4/2015 8/2/2015 CBI............ (G) Mixed metal (G) Lithium mixed
oxide for batteries. metal oxide.
P-15-0451.......... 5/5/2015 8/3/2015 Alberdingk (S) Wood coatings... (G) Castor oil,
Boley, Inc. dehydrated, polymer
with alkyldioic
acid, polymer with
alkyl diols,
hydroxy(hydroxymeth
yl)alkylylpropanoic
acid,
methylenebis[isocya
natocycloalkane]
and alkyl glycol.
P-15-0451.......... 5/5/2015 8/3/2015 Alberdingk (S) Plastic coatings (G) Castor oil,
Boley, Inc. dehydrated, polymer
with alkyldioic
acid, polymer with
alkyl diols,
hydroxy(hydroxymeth
yl)alkylylpropanoic
acid,
methylenebis[isocya
natocycloalkane]
and alkyl glycol.

[[Page 37250]]

P-15-0451.......... 5/5/2015 8/3/2015 Alberdingk (S) Leather and (G) Castor oil,
Boley, Inc. textile dehydrated, polymer
impregnation. with alkyldioic
acid, polymer with
alkyl diols,
hydroxy(hydroxymeth
yl)alkylylpropanoic
acid,
ethylenebis[isocyan
atocycloalkane] and
alkyl glycol.
P-15-0452.......... 5/5/2015 8/3/2015 Alberdingk (G) Wood coatings (G) Castor oil
Boley, Inc. and plastic dehydrated, polymer
coatings leather with di-alkyl
textile carbonate, alkyl
impregnation. diamine, alkyl
diol,
dihydroxyalkyl
carboxylic acid and
methylenebis[isocya
natocycloalkane]-,
compd. with
trialkylamine.
P-15-0453.......... 5/5/2015 8/3/2015 Alberdingk (G) Wood coatings (G) Castor oil,
Boley, Inc. and plastic dehydrated, polymer
coatings leather with alkyl diamine,
textile dihydroxyalkyl
impregnation. carboxylic acid,
aromatic
azinetriamine,
methylenebis[isocya
natocycloalkane]-
,compds. with
trialkylamine.
P-15-0454.......... 5/5/2015 8/3/2015 Alberdingk (G) Wood coatings (G) Castor oil,
Boley, Inc. and plastic dehydrated, polymer
coatings leather with alkyldioic
textile acid, alkyldiamine,
impregnation. alkyldiol,
dihydroxyalkyl
carboxylic acid,
methylenebis[isocya
natocyclohexane],
alkyl glycol, and
polyethylene glycol
bis(hydroxymethyl)a
lkyl Me ether,
compd. with triakyl
amine.
P-15-0455.......... 5/5/2015 8/3/2015 CBI............ (G) Automotive parts (S) 1,4-
Cyclohexanedicarbox
ylic acid, 1,4-
dimethyl ester,
polymer with 1,4-
cyclohexanedimethan
ol.
P-15-0456.......... 5/6/2015 8/4/2015 CBI............ (G) resin for use in (G) Amine functional
electrocoats. epoxy, organic acid
salt.
P-15-0457.......... 5/6/2015 8/4/2015 Allnex USA, Inc (S) Coating resin (G) Substituted
additive-curing Alkanoic acid,
catalyst. metal complex.
P-15-0459.......... 5/6/2015 8/4/2015 CBI............ (G) Site-limited (G) Siloxanes and
intermediate. Silicones, Me
hydrogen,
hydrolysis products
with 1,1,3,3-
tetramethyldisiloxa
ne, distn.
residues.
P-15-0460.......... 5/7/2015 8/5/2015 Allnex USA, Inc (S) Coating resin (G) Substituted
additive-curing alkanoic acid-,
catalyst. metal salt.
P-15-0461.......... 5/7/2015 8/5/2015 CBI............ (G) HAPS free, (G) Siloxanes and
silicone based Silicones, alkoxy
resin for the Me, polymers with
manufacture of Me silsesquioxanes,
ambient curing alkoxy-terminated.
industrial
coatings, such as
anticorrosion
coating for
mufflers, ovens,
chimneys, oven
inserts, barbeques
and electric and
gas heaters as well
as other large
industrial objects
and equipment.
P-15-0462.......... 5/7/2015 8/5/2015 CBI............ (S) Acrylic resin (G) Hexamethylene
used in the diisocyanate with
manufacture of inks caprolactone
and coatings. acrylate.
P-15-0463.......... 5/11/2015 8/9/2015 CBI............ (G) Foam component.. (G) Bifunctional
aromatic polyester
polyol.
P-15-0464.......... 5/11/2015 8/9/2015 CBI............ (G) Foam component.. (G) Polyfunctional
aromatic polyester
polyol.
P-15-0465.......... 5/12/2015 8/10/2015 3M Company..... (S) Reactive polymer (G) Amine modified
in 2 part epoxy epoxy resin.
adhesive.
P-15-0466.......... 5/12/2015 8/10/2015 CBI............ (G) Intermediate.... (G) Acrylic acid
polymer.
P-15-0467.......... 5/15/2015 8/13/2015 CBI............ (G) Binder resin for (G) Polyester type
printing ink (Open urethane polymer.
non-disperse use ).
P-15-0468.......... 5/15/2015 8/13/2015 CBI............ (G) Printing ink (G)
additive. Polycyclecarboxylic
acid, hydroxy-
(substituted
phenyl)diazenyl,
metal salt.
P-15-0469.......... 5/15/2015 8/13/2015 CBI............ (G) Surfactant...... (G) Algal oil
betaine surfactant.
P-15-0470.......... 5/15/2015 8/13/2015 CBI............ (G) Intermediate.... (G) Algal oil amide.

[[Page 37251]]

P-15-0474.......... 5/19/2015 8/17/2015 xF Technologies (S) Plasticizer..... (S) 2-
Furancarboxylic
acid, 5-methyl-,
ethyl ester.
P-15-0474.......... 5/19/2015 8/17/2015 xF Technologies (S) Organic solvent. (S) 2-
Furancarboxylic
acid, 5-methyl-,
ethyl ester.
P-15-0475.......... 5/19/2015 8/17/2015 xF Technologies (G) Renewable (S) 2-
organic solvent/ Furancarboxylic
plasticizer. acid, 5-methyl-,
methyl ester.
P-15-0476.......... 5/19/2015 8/17/2015 xF Technologies (G) Renewable (S) 2-
organic solvent/ Furancarboxylic
plasticizer. acid, 5-methyl-,1-
methylethyl ester.
P-15-0477.......... 5/19/2015 8/17/2015 xF Technologies (G) Renewable (S) 2-
organic solvent/ Furancarboxylic
plasticizer. acid, 5-methyl-,
tetradecyl ester.
P-15-0478.......... 5/19/2015 8/17/2015 xF Technologies (G) Renewable (S) 2-
organic solvent/ Furancarboxylic
plasticizer. acid, 5-methyl-,
2,2'-
[ethanediylbis(oxy-
2,1-ethanediyl)
ester.
P-15-0479.......... 5/19/2015 8/17/2015 xF Technologies (G) Renewable (S) 2-
organic solvent/ furancarboxylic
plasticizer. acid, 5-methyl-,
2,2'-[oxybis(methyl-
2,1-ethanediyl)]
ester.
P-15-0481.......... 5/19/2015 8/17/2015 CBI............ (S) Curing agent for (G) Benzaldehyde,
epoxy coating reaction products
systems. with
polyalkylenepolyami
nes, hydrogenated,
reaction products
with alkyl ketone.
P-15-0482.......... 5/20/2015 8/18/2015 CBI............ (G) Lubricant (G) Phenol, alkyl
additive. derivs.
P-15-0483.......... 5/20/2015 8/18/2015 CBI............ (G) Component in (G) Alkyl phosphate
cleaning ammonium salt.
formulation.
P-15-0484.......... 5/22/2015 8/20/2015 CBI............ (G) Chemical (G) Amino benzyl
intermediate. acrylic copolymer.
P-15-0485.......... 5/22/2015 8/20/2015 CBI............ (G) Additive for (G) Bismuth
Industrial Coatings. Compound.
P-15-0487.......... 5/22/2015 8/20/2015 Daewoo (S) Use with (G) Multi-walled
International materials to carbon nanotubes.
USA Corp. improve mechanical
properties or
electrical
conductivities.
P-15-0487.......... 5/22/2015 8/20/2015 Daewoo (S) Additive for (G) Multi-walled
International heat transfer and carbon nanotubes.
USA Corp. thermal emissions
in electronic
devices and
materials; use as a
semi-conductor,
conductive, or
resistive element
in electronic
circuitry and
devices.
P-15-0487.......... 5/22/2015 8/20/2015 Daewoo (S) Use as an (G) Multi-walled
International additive for carbon nanotubes.
USA Corp. electromagnetic
interface (EMI)
shielding in
electronic devices;
additive for
electrodes in
electronic
materials and
electronic devices.
P-15-0487.......... 5/22/2015 8/20/2015 Daewoo (S) Use as a (G) Multi-walled
International catalyst support in carbon nanotubes.
USA Corp. chemical
manufacturing;
Coating additive to
improve corrosion
resistance or
conductive
properties.
P-15-0487.......... 5/22/2015 8/20/2015 Daewoo (S) Additive for (G) Multi-walled
International fibers in carbon nanotubes.
USA Corp. structural and
electrical
applications;
Additive for fibers
in fabrics and
textiles.
P-15-0487.......... 5/22/2015 8/20/2015 Daewoo (S) Use as a filter (G) Multi-walled
International additive to remove carbon nanotubes.
USA Corp. nanoscale
materials; use as a
semi-conducting
compounding
additive for high-
voltage cable; use
as an additive for
super-
hydrophobicity.
P-15-0487.......... 5/22/2015 8/20/2015 Daewoo (S) Additive for (G) Multi-walled
International weight reduction in carbon nanotubes.
USA Corp. materials.
P-15-0487.......... 5/22/2015 8/20/2015 Daewoo (S) Use as a heat- (G) Multi-walled
International generating element carbon nanotubes.
USA Corp. in heating devices
and materials.
P-15-0487.......... 5/22/2015 8/20/2015 Daewoo (S) Use as an (G) Multi-walled
International additive for carbon nanotubes.
USA Corp. electro-static
discharge (ESD) in
electronic devices,
electronics, and
materials.
P-15-0488.......... 5/22/2015 8/20/2015 Daewoo (G) Use as an (G) Multi-walled
International additive for super-- carbon nanotubes.
USA Corp. hydrophobcity.

[[Page 37252]]

P-15-0489.......... 5/22/2015 8/20/2015 Daewoo (G) Use as an (G) Multi-walled
International additive for super-- carbon nanotubes.
USA Corp. hydrophobcity.
P-15-0490.......... 5/22/2015 8/20/2015 Daewoo (S) Use as a heat- (G) Multi-walled
International generating element carbon nanotubes.
USA Corp. in heating devices
and materials.
P-15-0491.......... 5/22/2015 8/20/2015 Daewoo (S) Use as a heat- (G) Multi-walled
International generating element carbon nanotubes
USA Corp. in heating devices
and materials.
----------------------------------------------------------------------------------------------------------------

In Table II. of this unit, EPA provides the following information
(to the extent that such information is not claimed as CBI) on the TMEs
received by EPA during this period: The EPA case number assigned to the
TME, the date the TME was received by EPA, the projected end date for
EPA's review of the TME, the submitting manufacturer/importer, the
potential uses identified by the manufacturer/importer in the TME, and
the chemical identity.

Table II--TMEs Received From May 1, 2015 to May 29, 2015
----------------------------------------------------------------------------------------------------------------
Projected
Case No. Received date notice end Manufacturer Use Chemical
date importer
----------------------------------------------------------------------------------------------------------------
T-15-0009.......... 5/20/2015 7/4/2015 CBI............ (G) Component in (G) Alkyl phosphate
cleaning ammonium salt.
formulation.
----------------------------------------------------------------------------------------------------------------

In Table III. of this unit, EPA provides the following information
(to the extent that such information is not claimed as CBI) on the NOCs
received by EPA during this period: The EPA case number assigned to the
NOC, the date the NOC was received by EPA, the projected end date for
EPA's review of the NOC, and chemical identity.

Table III--63 NOCs Received From May1, 2015 to May 29, 2015
----------------------------------------------------------------------------------------------------------------
Commencement
Case No. Received date notice end date Chemical
----------------------------------------------------------------------------------------------------------------
P-12-0425............................. 5/14/2015 5/5/2015 (S) Methanol, reaction products with
1,1,1,2,2,3,4,5,5,6,6,7,7,7-
tetradecafluoro-3-heptene.*
P-13-0036............................. 5/12/2015 5/7/2015 (G) Polymer of epoxy and aliphatic and
aromatic acids.
P-13-0690............................. 5/19/2015 5/11/2015 (G) Aluminum phosphate.
P-13-0860............................. 5/11/2015 4/30/2015 (G) Alkanedicarboxylic acid, polymer
with alkanediamine, alkanediol,
hydroxy-(hydroxymethyl)-
alkanecarboxylic acid and
methylenebis[isocyanatocycloalkane]
compd. with (dialkylamino)alkanol.
P-14-0100............................. 5/19/2015 5/13/2015 (G) Polymerized fatty acid esters with
aminoalcohol alkoxylates.
P-14-0110............................. 5/10/2015 4/30/2015 (S) Cashew, nutshell liquid, polymer
with formaldehyde, reaction products
with diethanolamine and
diisopropanolamine.*
P-14-0410............................. 5/12/2015 4/16/2015 (G) Fatty acids, c18-unsatd., dimers,
polymers with ammonia-ethanolamine
reaction by-products.
P-14-0425............................. 5/12/2015 4/13/2015 (G) Fatty acids, c18-unsatd., dimers,
polymers with cashew nutshell liquid,
glycidyl ethers.
P-14-0662............................. 5/12/2015 5/10/2015 (S) D-Glucopyranose, oliogmeric, c-10-
16-alkyl glycosides, polymers with
epichlorohydrin, and oligomeric d-
glucopyranose decyl octyl glycosides.*
P-14-0724............................. 5/12/2015 5/9/2015 (S) D-glucopyranose, oligomeric, decyl,
octyl glycosides, polymers with
epichlorohydrin, 3-
(dodecyldimethylammonio)-2-
hydroxypropyl ethers, chloride.*
P-14-0726............................. 5/27/2015 5/23/2015 (S) D-Glucopyranose, oligomeric, decyl
octyl glycosides, polymers with
epichlorohydrin, 3-
(dimethyloctadecylammonio)-2-
hydroxylpropyl ethers, chlorides.*
P-14-0749............................. 5/22/2015 5/14/2015 (G) Substituted alkanoic acid, polymer
with substituted alkanediol,
polyalkylene polyol and substituted
carbomonocycle, alkali metal salt.
P-14-0824............................. 5/4/2015 4/28/2015 (G) Rape oil, reaction products with
alkylamine.
P-14-0844............................. 5/5/2015 4/9/2015 (G) Organosilane treated boron nitride.
P-14-0845............................. 5/5/2015 4/9/2015 (G) Organosilane treated oxide ceramic.
P-14-0846............................. 5/8/2015 4/29/2015 (G) Alkanoic acid, hydroxy-
(hydroxyalkyl)-methyl-, polymer with
diisocyanatoalkane, -hydro--
hydroxypoly(oxy-alkanediyl) and
isocyanato-1-(isocyanatoalkyl)-
trimethylcycloalkane,
tetrahydroxyalkanel triacrylate-
blocked, compd. with trimethylamine.
P-15-0059............................. 5/29/2015 5/6/2015 (S) Siloxanes and silicones, 3-[(2-
aminoethyl)amino)propyl me, di-me,
reaction products with cadmium zinc
selenide sulfide, lauric acid and
oleylamine.*
P-15-0060............................. 5/29/2015 5/6/2015 (S) Dodecanoic acid, reaction products
with cadmium zinc selenide sulfide and
oleylamine.*
P-15-0104............................. 5/29/2015 5/6/2015 (S) Phosphonic acid, p-tetradecyl-,
reaction products with cadmium
selenide (cdse).*
P-15-0129............................. 5/12/2015 4/13/2015 (G) Ethoxylated alkyl chloroformate.

[[Page 37253]]

P-15-0130............................. 5/13/2015 4/16/2015 (G) Ethoxylated alkyl chloride.
P-15-0163............................. 5/27/2015 5/22/2015 (G) Carboxypolyalkylene resin,oxidized,
polymer with alkenoic acid, alkyl
alkenoate, alkenedioic acid,
polyalkylene glycol substituted
dicarbomonocycle, substituted
carbomonocycle, carbomonocyclic
icarboxylic acid and anhydride, alkyl
peroxide-initiated.
P-15-0168............................. 5/27/2015 5/20/2015 (S) 2-Heptanol, 3,6-dimethyl-.*
P-15-0188............................. 5/8/2015 5/7/2015 (G) Carbomoncycles, polymer with
substituted heteromonocycle, 2- (2-
alkyl-1-oxo-2-alkenyl) oxy] alkyl
hydrogen alkanedioate.
P-15-0194............................. 5/5/2015 4/27/2015 (G) Methacryloxyalkyl trialkoxysilane,
reaction products with alkyl
trialkoxysilane, epoxy modified alkoxy
alkyl trialkoxysilane and mixed metal
oxides.
P-15-0195............................. 5/12/2015 4/27/2015 (G) Methacryloxyalkyl trialkoxysilane,
reaction products with alkyl
trialkoxysilane, epoxy modified alkoxy
alkyl trialkoxysilane and mixed metal
oxides.
P-15-0196............................. 5/12/2015 4/27/2015 (G) Methacryloxyalkyl trialkoxysilane,
reaction products with alkyl
trialkoxysilane, epoxy modified alkoxy
alkyl trialkoxysilane and mixed metal
oxides.
P-15-0197............................. 5/12/2015 4/27/2015 (G) Methacryloxyalkyl trialkoxysilane,
reaction products with alkyl
trialkoxysilane, epoxy modified alkoxy
alkyl trialkoxysilane and mixed metal
oxides.
P-15-0198............................. 5/12/2015 4/26/2015 (G) Methacryloxyalkyl trialkoxysilane,
reaction products with alkyl
trialkoxysilane, epoxy modified alkoxy
alkyl trialkoxysilane and mixed metal
oxides.
P-15-0199............................. 5/8/2015 4/24/2015 (G) Metallic salt of dicarboxylic acid.
P-15-0200............................. 5/12/2015 4/27/2015 (G) Isocyanated alkyl trialkoxysilane,
reaction products with epoxy modified
cyclohexyl trialkoxysilane, alkylamine
trialkoxysilane and mixed metal
oxides.
P-15-0205............................. 5/12/2015 4/26/2015 (G) Alkyldiamine alkyl trialkoxysilane,
reaction products with methacrylate
alkyl trialkoxysilane and mixed metal
oxides.
P-15-0206............................. 5/12/2015 4/26/2015 (G) Alkyldiamine alkyl trialkoxysilane,
reaction products with methacrylate
alkyl trialkoxysilane and mixed metal
oxides.
P-15-0207............................. 5/12/2015 4/26/2015 (G) Methacrylate alkyl trialkoxysilane,
reaction products with metal oxides.
P-15-0209............................. 5/12/2015 4/26/2015 (G) Epoxy modified alkoxy alkyl
trialkoxysilane, reaction products
with mixed metal oxides.
P-15-0210............................. 5/12/2015 4/26/2015 (G) Alkyldiamine alkyl trialkoxysilane,
reaction products with methacrylate
alkyl trialkoxysilane and mixed metal
oxides.
P-15-0211............................. 5/12/2015 4/26/2015 (G) Methacryloxyalkyl trialkoxysilane,
reaction products with alkyl
trialkoxysilane, epoxy modified alkoxy
alkyl trialkoxysilane and mixed metal
oxides.
P-15-0212............................. 5/12/2015 4/26/2015 (G) Isocyanated alkyl trialkoxysilane,
reaction products with epoxy modified
cyclohexyl trialkoxysilane, and mixed
metal oxides.
P-15-0213............................. 5/12/2015 4/27/2015 (G) Alkyl trialkoxysilane, reaction
products with epoxy modified alkoxy
alkyl trialkoxysilane, methacrylate
alkyl trialkoxysilane and mixed metal
oxides.
P-15-0214............................. 5/12/2015 4/26/2015 (G) Alkyldiamine alkyl trialkoxysilane,
reaction products with methacrylate
alkyl trialkoxysilane and mixed metal
oxides.
P-15-0215............................. 5/12/2015 4/26/2015 (G) Epoxy modified alkoxy alkyl
trialkoxysilane, reaction products
with mixed metal oxides.
P-15-0216............................. 5/12/2015 4/26/2015 (G) Isocyanated alkyl trialkoxysilane,
reaction products with epoxy modified
cyclohexyl trialkoxysilane, alkylamine
trialkosysilane and mixed metal
oxides.
P-15-0217............................. 5/12/2015 4/26/2015 (G) Isocyanated alkyl trialkoxysilane,
reaction products with epoxy modified
cyclohexyl trialkoxysilane, alkylamine
trialkoxysilane and mixed metal
oxides.
P-15-0218............................. 5/5/2015 4/26/2015 (G) Epoxy modified alkoxy alkyl
trialkoxysilane, reaction products
with mixed metal oxides.
P-15-0219............................. 5/12/2015 4/26/2015 (G) Isocyanated alkyl trialkoxysilane,
reaction products with epoxy modified
cyclohexyl trialkoxysilane, alkylamine
trialkoxysilane and mixed metal
oxides.
P-15-0222............................. 5/5/2015 4/27/2015 (G) Alkyl trialkoxysilane, reaction
products with epoxy modified alkoxy
alkyl trialkoxysilane, methacrylate
alkyl trialkoxysilane and mixed metal
oxides.
P-15-0223............................. 5/5/2015 4/27/2015 (G) Alkyl trialkoxysilane, reaction
products with methacrylate alkyl
trialkoxysilane, epoxy modified alkoxy
alkyl trialkoxysilane and mixed metal
oxides.
P-15-0224............................. 5/12/2015 4/27/2015 (G) Alkyl trialkoxysilane, reaction
products with epoxy modified alkoxy
alkyl trialkoxysilane, methacrylate
alkyl trialkoxysilane and mixed metal
oxides.
P-15-0225............................. 5/12/2015 4/26/2015 (G) Methacryloxyalkyl trialkoxysilane,
reaction products with alkyl
trialkoxysilane, epoxy modified alkoxy
alkyl trialkoxysilane and mixed metal
oxides.
P-15-0226............................. 5/12/2015 4/26/2015 (G) Alkyl amine trialkoxysilane,
reaction products with isocyanated
alkyl trialkoxysilane, epoxy modified
cyclohexyl trialkoxysilane, and mixed
metal oxides.
P-15-0227............................. 5/5/2015 4/27/2015 (G) Alkyl trialkoxysilane, reaction
products with epoxy modified alkoxy
alkyl trialkoxysilane, methacrylate
alkyl trialkoxysilane and mixed metal
oxides.
P-15-0229............................. 5/5/2015 4/26/2015 (G) Isocyanated alkyl trialkoxysilane,
reaction products with epoxy modified
cyclohexyl trialkoxysilane and mixed
metal oxides.
P-15-0231............................. 5/12/2015 4/26/2015 (G) Alkyl trialkoxysilane, reaction
products with epoxy modified alkoxy
alkyl trialkoxysilane, methacrylate
alkyl trialkoxysilane and mixed metal
oxides.
P-15-0233............................. 5/12/2015 4/26/2015 (G) Isocyanated alkyl trialkoxysilane,
reaction products with epoxy modified
cyclohexyl trialkoxysilane, and mixed
metal oxides.
P-15-0234............................. 5/12/2015 4/26/2015 (G) Isocyanated alkyl trialkoxysilane,
reaction products with epoxy modified
cyclohexyl trialkoxysilane, alkylamine
trialkoxysilane and mixed metal
oxides.*
P-15-0235............................. 5/12/2015 4/26/2015 (G) Epoxy modified cyclohexyl
trialkoxysilane, reaction products
with isocyanated alkyl
trialkoxysilane, glass and mixed
oxides.
P-15-0236............................. 5/29/2015 4/29/2015 (G) Alkyl amine trialkoxysilane,
reaction products with isocyanated
alkyl trialkoxysilane, epoxy modified
cyclohexyl trialkoxysilane, and mixed
metal oxides.
P-15-0237............................. 5/12/2015 4/26/2015 (G) Methacrylate alkyl trialkoxysilane,
reaction products with metal oxides.

[[Page 37254]]

P-15-0239............................. 5/25/2015 4/26/2015 (G) Siloxanes and silicones, amino
alkyl substituted alkyl hydroxyl,
hydroxyl fluorinated alkyl, ester
salts, reaction products with mixed
metal oxides.
P-15-0242............................. 5/7/2015 5/6/2015 (G) Heteropolycyclic, polymer with
alkanedioic acid, di-alkenoate.
P-15-0264............................. 5/27/2015 5/22/2015 (G) Carabomonocyclic dicarboxylic acid,
polymer with alkanedioic acids,
alkanediol, substituted
heterpolycycle, alkanedioic acid,
alkanediol, substituted
carbomonocycle, alkyl alkenoate,
alkanediols and alkenoic acid, alkyl
ester, alkanoate, alkyl peroxide-
initiated.
P-15-0265............................. 5/27/2015 5/22/2015 (G) Carbomonocyclic dicarboxylic acid,
polymer with alkanedioic acids,
alkanediol, substituted
heteropolycycle, alkanedioic acid,
alkanediol, substituted
carbomonocycle, alkyl alkanoate,
alkanedioic acid, alkanediols and
alkanoic acid, alkyl ester, alkanoate,
alkyl peroxide-initiated.
P-15-0268............................. 5/6/2015 5/1/2015 (G) Alkyl alkenoic acid, polymer with
substituted alkyl alkenoate and alkyl
alkenoate, reaction products with
polyalkylene glycol substituted alkyl
ether.
----------------------------------------------------------------------------------------------------------------

If you are interested in information that is not included in these
tables, you may contact EPA as described in Unit III to access
additional non-CBI information that may be available.

Authority: 15 U.S.C. 2601 et seq.

Dated: June 24, 2015.
Chandler Sirmons,
Acting Director, Information Management Division, Office of Pollution
Prevention and Toxics.
[FR Doc. 2015-16047 Filed 6-29-15; 8:45 am]
BILLING CODE 6560-50-P

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.